Engineering Structures Jobs in Sturtevant, WI

Job Title: Tractor Test Driver & Quality Inspector

Location: Racine, Wisconsin (WI)

Position Summary

The Tractor Test Driver & Quality Inspector is responsible for conducting structured test drives of new or serviced tractors to evaluate operational performance, safety, and overall product quality. This role identifies, documents, and communicates mechanical, functional, and quality-related issues observed during dynamic testing. The position collaborates closely with Engineering, Quality Assurance, and Service teams to support root cause analysis and continuous product improvement.

Key Responsibilities

• Perform standardized and ad-hoc test drives of tractors on various terrains including paved surfaces, gravel tracks, fields, and slopes under varying load conditions and speeds.
• Evaluate and validate performance of critical systems including engine, transmission, PTO, hydraulics, steering, braking systems, 3-point hitch, auxiliary circuits, and implements.
• Identify and document issues related to NVH (Noise, Vibration, and Harshness), drivetrain irregularities, hydraulic lag or oscillation, steering drift, brake fade, electrical faults, sensor anomalies, and operator interface (HMI) defects.
• Conduct visual and functional inspections for leaks, loose components, misalignment, abnormal wear, sharp edges, fit and finish defects, and paint or coating issues.
• Use OEM diagnostic tools or data acquisition systems to verify CAN bus communication, read diagnostic trouble codes (DTCs), and capture operational data logs.
• Communicate findings and provide detailed reports to cross-functional teams including Engineering, Manufacturing, and Quality departments.
• Support root cause investigations and recommend corrective actions based on test results.
• Perform pre-operation safety inspections including checks of tires, fluid levels, lights, horn, ROPS, and seat belts.
• Recommend improvements to product design, assembly processes, and testing procedures based on operational observations.
• Follow all safety protocols and testing procedures during equipment operation and evaluation.

Minimum Qualifications

• High school diploma or GED required; Associate degree or technical certification in Automotive Technology, Diesel Technology, Agricultural Equipment Technology, or a related field preferred.
• Minimum of 2 years of experience operating tractors or heavy/mobile equipment in agricultural, construction, industrial, testing, or service environments.
• Valid driver’s license with a clean driving record.
• Ability to operate tractors with manual and hydrostatic transmissions.
• Basic understanding of hydraulics, powertrain systems, and electrical systems.
• Experience with CAN diagnostics and reading diagnostic trouble codes (DTCs) preferred.
• Ability to read and interpret basic technical drawings, service manuals, and testing procedures.

Physical Requirements

• Ability to frequently climb on and off heavy equipment.
• Capability to lift up to 50 lbs when required.
• Ability to sit for extended periods while operating equipment during testing.

Work Environment

• Work will be performed both outdoors and in designated testing areas.
• Exposure to noise, vibration, dust, and varying weather conditions.
• Use of personal protective equipment (PPE) such as hearing protection, safety glasses, gloves, steel-toe boots, and high-visibility clothing is required.

Preferred Certifications

• OSHA 10 or OSHA 30 Safety Certification.
• Forklift or mobile equipment operation certification (site-specific).
• First Aid and CPR certification.
• CDL not required; however, agricultural or heavy equipment operation training is considered a plus.

Job Title: Tractor Test Driver & Quality Inspector

Location: Racine, Wisconsin (WI)

Position Summary

The Tractor Test Driver & Quality Inspector is responsible for conducting structured test drives of new or serviced tractors to evaluate operational performance, safety, and overall product quality. This role identifies, documents, and communicates mechanical, functional, and quality-related issues observed during dynamic testing. The position collaborates closely with Engineering, Quality Assurance, and Service teams to support root cause analysis and continuous product improvement.

Key Responsibilities

• Perform standardized and ad-hoc test drives of tractors on various terrains including paved surfaces, gravel tracks, fields, and slopes under varying load conditions and speeds.
• Evaluate and validate performance of critical systems including engine, transmission, PTO, hydraulics, steering, braking systems, 3-point hitch, auxiliary circuits, and implements.
• Identify and document issues related to NVH (Noise, Vibration, and Harshness), drivetrain irregularities, hydraulic lag or oscillation, steering drift, brake fade, electrical faults, sensor anomalies, and operator interface (HMI) defects.
• Conduct visual and functional inspections for leaks, loose components, misalignment, abnormal wear, sharp edges, fit and finish defects, and paint or coating issues.
• Use OEM diagnostic tools or data acquisition systems to verify CAN bus communication, read diagnostic trouble codes (DTCs), and capture operational data logs.
• Communicate findings and provide detailed reports to cross-functional teams including Engineering, Manufacturing, and Quality departments.
• Support root cause investigations and recommend corrective actions based on test results.
• Perform pre-operation safety inspections including checks of tires, fluid levels, lights, horn, ROPS, and seat belts.
• Recommend improvements to product design, assembly processes, and testing procedures based on operational observations.
• Follow all safety protocols and testing procedures during equipment operation and evaluation.

Minimum Qualifications

• High school diploma or GED required; Associate degree or technical certification in Automotive Technology, Diesel Technology, Agricultural Equipment Technology, or a related field preferred.
• Minimum of 2 years of experience operating tractors or heavy/mobile equipment in agricultural, construction, industrial, testing, or service environments.
• Valid driver’s license with a clean driving record.
• Ability to operate tractors with manual and hydrostatic transmissions.
• Basic understanding of hydraulics, powertrain systems, and electrical systems.
• Experience with CAN diagnostics and reading diagnostic trouble codes (DTCs) preferred.
• Ability to read and interpret basic technical drawings, service manuals, and testing procedures.

Physical Requirements

• Ability to frequently climb on and off heavy equipment.
• Capability to lift up to 50 lbs when required.
• Ability to sit for extended periods while operating equipment during testing.

Work Environment

• Work will be performed both outdoors and in designated testing areas.
• Exposure to noise, vibration, dust, and varying weather conditions.
• Use of personal protective equipment (PPE) such as hearing protection, safety glasses, gloves, steel-toe boots, and high-visibility clothing is required.

Preferred Certifications

• OSHA 10 or OSHA 30 Safety Certification.
• Forklift or mobile equipment operation certification (site-specific).
• First Aid and CPR certification.
• CDL not required; however, agricultural or heavy equipment operation training is considered a plus.

Manufacturing Operations Manager

Our Manufacturing Operations Manager oversees execution of manufacturing, and production for the plant which includes safety, productivity, labor, cost, production schedule, quality, and continuous process improvements to meet established business goals. Plans and coordinates efficient and economical manufacturing activities and provides quality levels and service that exceed the customer’s expectations. Responsible for driving key initiatives to ensure cost reduction, inventory management, delivery performance, and key performance indicator (KPI) targets.

What will you be doing -

• Oversee and manage all manufacturing activities to ensure safety, quality, cost, and morale and to meet and exceed customer and Company requirements.
• Assist General Manager in the development and management of annual plan, budget, operating and capital expense budgets, Key Performance Indicators (KPI), operating efficiency, and cost control.
• Coordinate and guide activities in the areas of manufacturing, Lean, 5S, quality enhancements, staffing, training, and employee relations. Manage production supervisors.

What are we looking for -

• Bachelor’s Degree in Manufacturing, Industrial, or Operations Management; Mechanical, Industrial or Manufacturing Engineering; Supply Chain; Business Administration; or related field preferred but not required.
• 7-10+ years of manufacturing (i.e., assembly, cutting, fabrication, welding, painting, etc.) experience.
• 5+ years of progressively responsible manufacturing supervision/management experience.
• Practical experience applying Lean, Continuous Improvement, and Total Quality Production System (TQPS) principles in a manufacturing environment preferred.
• Experience with manufacturing and production KPIs/Analytics including the Production Efficiency (PEFF) system preferred.
• Experience with ERP/MRP systems and integrated computer programs and applications.

4Front Engineered Solutions is a leader in the door and docking industry. This role supports High Performance Doors, under the brand names Dynaco, Albany, and TKO, on-site at our Kenosha, WI facility.

What we offer -

• Medical, dental and vision insurance (HSA includes company contribution)
• STD, LTD, Life and AD&D insurance
• 401k including company match
• Variable compensation bonus plan paid out quarterly
• Reimbursement for select PPE
• 11 paid holidays
• 3 weeks of PTO per year, accrued with each bi-weekly payroll cycle

Why apply?

• Empowerment: You’ll work as part of a global team in a flexible work environment, learning and enhancing your expertise.
• Innovation: You embrace challenges and want to drive ambitious change.
• Integrity: You are results-oriented, reliable, straightforward and value being treated accordingly.

If you are interested or know someone who may be interested in working for a premier employer or want more information, please contact John Vandenberg at , 262-496-5374.

Electrical Field Engineer

• Location: Mount Pleasant, WI
• Contract: 6 month contract-to-hire
• Schedule: 8am-5pm (Monday-Friday, full onsite)
• Pay: $60-$70/hr

Must Haves:

• 7+ years of experience as a Project Engineer, Field Engineer, Construction Engineer, etc.
• Very strong experience in low voltage, inside electrical, power distribution
• Bachelors degree + in electrical engineering
• Ability to understand one-line drawings, cable schedules, switch gear packages, cable management, etc.

Plusses:

• Master’s degree in electrical engineering
• Expert in Excel & Bluebeam

What You’ll Do:

• Review and interpret electrical engineering drawings, including one-line diagrams, cable schedules, conduit layouts, and switchgear packages, ensuring alignment with project specifications and construction requirements.
• Collaborate with design engineers to review drawings and technical documentation, identify discrepancies or improvement opportunities, and communicate recommended updates to optimize constructability and system performance.
• Support the implementation of electrical designs in the field, working closely with construction teams to ensure installations align with approved drawings and engineering intent.
• Manage and maintain electrical drawing logs, redlines, and As-Builts, ensuring all field changes and updates are accurately documented and incorporated into final project records.
• Coordinate with engineering teams and subcontractors to resolve RFIs, technical questions, and design clarifications related to electrical systems.
• Provide technical support for electrical construction activities, including participation in construction planning, installation sequencing, and commissioning readiness.
• Track and report progress on electrical scopes of work, proactively identifying issues that could impact cost, schedule, safety, or quality and communicating them to the Project Manager.

Manufacturing Engineer – Precision Machining

Racine, WI | 1st Shift | $75,000 – $100,000 (DOE) | Direct Hire

Engauge Workforce Solutions is partnering with a precision machining operation in Racine, WI to hire a Manufacturing Engineer. This role is ideal for an engineer who enjoys working closely with production teams and supporting the full manufacturing lifecycle—from quoting to production launch.

The position works directly with Plant Manager, production leadership, and machine operators to support CAM programming, quoting, and process improvements across the shop.

Key Responsibilities

CAM Programming & Quoting

• Use SolidWorks and CAMWorks to generate machining programs and support quoting activities
• Develop G-code through CAMWorks to simulate machining processes and evaluate manufacturability
• Analyze customer prints and specifications to determine optimal machining strategies
• Generate accurate quotes by evaluating cycle times, tooling, materials, and process requirements
• Work with production teams to validate machining processes and ensure quote accuracy

Process Engineering & Production Support

• Develop machining routings and process strategies for production
• Troubleshoot machining issues with operators and leadership
• Optimize cycle times, tooling selections, and machining parameters
• Support new part introductions from quoting through production launch

Engineering & Documentation

• Create and maintain 3D models and 2D drawings in SolidWorks
• Maintain process documentation, routings, and work instructions
• Manage part data, BOMs, and documentation in the ERP system (Plex experience preferred)
• Support quality planning including PFMEA, control plans, and inspection strategies

Continuous Improvement

• Identify opportunities to improve machining processes and increase throughput
• Apply Lean manufacturing principles to reduce waste and improve efficiency
• Support production teams with ongoing troubleshooting and process improvements

Qualifications

• Bachelor’s Degree in Mechanical, Manufacturing, or Industrial Engineering
• 3–5+ years of engineering experience in a machining environment
• Strong experience with SolidWorks
• CAMWorks experience highly preferred
• Understanding of G-code and CNC machining processes
• Experience developing machining routings and cost estimates for quoting
• Familiarity with ERP systems (Plex preferred)
• Knowledge of Lean manufacturing principles
• Strong analytical, problem-solving, and collaboration skills

Note: CAMWorks experience is preferred but not required if the candidate has strong machining and quoting experience.

Compensation & Benefits

• Salary: $75,000 – $105,000 based on experience
• 1st Shift Schedule
• Direct Hire Opportunity
• Stable precision machining environment
• Opportunity to work directly with plant leadership and influence production strategy

Apply or Learn More

Call/Text: Caleb Vance – (313) 548-1689

Email:

If you're a hands-on manufacturing engineer who enjoys machining, quoting, and improving shop performance, we’d love to connect.

Description

Reporting to the General Manager the IT Manufacturing Systems Analyst will help to support and optimize our manufacturing operations through effective use of our information technology systems. This position will be responsible for analyzing, designing, implementing and supporting IT systems critical to our production environment, ensuring efficiency, accuracy, and data integrity.

This list of duties and responsibilities is not all inclusive and may be expanded to include other duties and responsibilities as management may deem necessary from time to time:

• Serve as a primary point of contact and subject matter expert for IT-related issues and projects within the manufacturing environment.
• Work with stakeholders to understand business goals and accordingly plan system roadmap and strategy.
• Collaborate with manufacturing, engineering, quality, and other cross-functional teams to understand their business needs and translate them into technical requirements.
• Analyze existing manufacturing systems and processes to identify areas for improvement, optimization, and automation.
• Participate in the selection, implementation, and configuration of new manufacturing systems, including ERP, MES, PLM, and other related applications.
• Manage relationships with vendors for new and existing software to optimize existing functions and identify new IT solutions that continue to meet the needs of the business.
• Act as a liaison between business groups and IT teams to discover, plan and coordinate IT projects and enhancements.
• Develop and maintain system documentation, including process flows, configurations, and user guides.
• Provide technical support and troubleshooting for manufacturing systems, resolving issues in a timely and effective manner.
• Assist in the development and execution of test plans for system implementations, upgrades, and modifications.
• Participate in training end-users on manufacturing systems and processes.
• Ensure data integrity and security within manufacturing systems.
• Develop and generate reports and dashboards to provide insights into manufacturing performance and identify trends.
• Contribute to the development and implementation of IT policies and procedures within the manufacturing context.
• Manage small to medium-sized IT projects related to manufacturing systems.
• Ability to work in a global team environment and coordinate with multiple IT teams as needed.
• Ability to learn and research to keep up with software trends and product releases in manufacturing industry to identify automation and process improvement opportunities

Requirements

Education:

Bachelor’s degree in information technology, Computer Science, Engineering, or a related field. Equivalent experience may be considered.

Experience:

• Minimum of 3 years of experience working as a Systems Analyst or in a similar IT role within a manufacturing environment.
• Strong understanding of manufacturing processes, such as production planning, shop floor control, quality management, and supply chain.
• Experience with one or more enterprise-level manufacturing systems (e.g., ERP - SAP, Workwise, Microsoft Dynamics; MES; PLM).
• Proven ability to plan and execute transition between old and new business systems and processes as needed.
• Proficiency in data analysis and reporting tools (e.g., SQL, Excel, Power BI).
• Excellent analytical, problem-solving, and troubleshooting skills.
• Strong communication, interpersonal, and collaboration skills, with the ability to effectively interact with both technical and non-technical stakeholders.
• Ability to manage multiple tasks and priorities in a fast-paced environment.
• Strong understanding of integrations between manufacturing systems and other business systems (e.g. ERP).

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions

• Thorough understanding of system development life cycle models and methodologies
• Thorough understanding of IT systems and processes
• Demonstrated effective interpersonal, verbal and written communication skills
• Ability to thrive in a diverse, collaborative, team-oriented environment where change occurs often
• Strong sense of initiative and a sense of urgency, demonstrated by accomplishing tasks; improving current work processes; and assisting others when necessary
• Unwavering attention to detail and commitment to world-class quality
• Ability to embrace deadlines
• Able to project a positive and professional demeanor to all internal and external contacts

• Perform accurate quantity takeoffs from blueprints, drawings, and specifications
• Analyze electrical diagrams and project plans to determine scope and installation requirements
• Utilize estimating software and tools to build comprehensive project estimates
  
  

• Identify labor, material, equipment, subcontractor, and vendor requirements
• Develop detailed cost estimates and bid proposals aligned with project specifications
• Solicit, review, and evaluate vendor and subcontractor quotes for accuracy and competitiveness
  
  

• Prepare RFIs, clarifications, and proposal documents for bid submissions
• Coordinate estimating timelines and ensure all deliverables meet bid deadlines
• Work closely with project management and operations teams to ensure alignment on project scope and pricing strategy
  
  

• Maintain organized documentation of estimates, assumptions, and bid details
• Communicate effectively with internal teams, clients, and partners throughout the estimating process
• Occasionally travel to job sites or client locations as needed
  
  

• Associate’s degree in Electrical Construction, Engineering Technology, or a related field (or equivalent experience)
• 3+ years of experience in electrical construction, estimating, or a related role
• Strong mathematical, analytical, and problem-solving skills
• Proficiency in Microsoft Excel and other Microsoft Office tools
• Excellent organization, communication, and time-management abilities
• Ability to work independently and manage multiple deadlines
  
  

• Bachelor’s degree in Business, Engineering, Construction Management, or related field
• 5+ years of experience in electrical or construction estimating
• Experience with industry estimating software (e.g., McCormick or similar platforms)
• Electrical field experience (e.g., Journeyperson) or relevant certifications
• Knowledge of applicable electrical codes and design standards
  
  

• Competitive compensation based on experience
• Full-time, stable career opportunity in a growing construction environment
• Comprehensive benefits package including health insurance, retirement plan, and paid time off
• Collaborative team culture with opportunities for professional growth
  
  

AMS Industries, Inc. is a MEP+ contracting firm serving the commercial, industrial, refrigeration and nuclear industries (PMT). With over 60 years of existence, AMS has grown from a small refrigeration contractor with a few employees to a multi-discipline and multi-market MEP contractor with more than 500 employees. We strive to meet our commitments to clients, develop our people and improve our communities.

The Onsite Project Manager will oversee the successful delivery of highly complex mechanical and MEP systems. This position requires an individual with expertise in design/engineering coordination, estimating, construction management, and strong client-facing communication. The Onsite Project Manager will serve as the primary point of contact between the field, subcontractors, and client representatives, ensuring the project is delivered safely, on time, and within budget.

Responsibilities:

• Manage the full project lifecycle onsite, from planning through closeout, with a focus on mission critical standards, reliability, and uptime requirements.
• Coordinate daily with field superintendents, foremen, subcontractors, and client representatives to ensure seamless execution of work.
• Interpret and communicate plans, specifications, and technical documents into actionable field tasks.
• Monitor and track project schedules, costs, manpower, and equipment to meet project deadlines and financial objectives.
• Prepare and manage RFIs, submittals, purchase orders, change orders, and progress billings.
• Evaluate and negotiate subcontractor and vendor quotations to ensure scope alignment and best value.
• Ensure strict adherence to quality assurance, safety, and compliance standards, especially those specific to mission critical environments.
• Lead onsite project meetings and provide accurate reporting to both internal leadership and client stakeholders.
• Identify risks and proactively implement strategies to resolve issues before they impact project performance.

Qualifications:

• Bachelor’s degree in Construction Management, Mechanical Engineering, or related field, or equivalent experience.
• 5+ years of project management experience in HVAC/MEP construction, with at least 2 years supporting mission critical or large-scale commercial projects preferred.
• Strong understanding of construction logistics, job cost accounting, and project financials.
• Proven ability to build and manage relationships with clients, subcontractors, and internal teams.
• Excellent written and verbal communication skills, with strong organizational and problem-solving abilities.
• Proficiency with Microsoft Office (Excel, Word, Project) and familiarity with construction management software (e.g., Autodesk Build, Spectrum ERP, or equivalent).

What we offer:

• Health Insurance and ESOP (Employee owned) package.
• Health Reimbursement Arrangement (HRA) with Medical PPO
• FSA and Dependent Care
• 401K Matching
• Paid Maternity & Paternity Leave
• Generous PTO roll-over policy
• Social events and outings throughout the year

• Support development and maintenance of project schedules, ensuring key milestones and deliverables are met
• Partner with project managers, field teams, and subcontractors to coordinate labor, materials, and equipment
• Assist in planning project workflows to maximize efficiency and productivity
  
  

• Maintain accurate and organized project documentation including drawings, RFIs, submittals, contracts, and change orders
• Track and manage project communications to ensure timely responses and alignment across stakeholders
• Assist in preparing and distributing project reports and updates
  
  

• Help monitor project costs, track expenditures, and flag potential budget variances
• Assist with estimating, bid support, and change order pricing as needed
• Support procurement and vendor coordination to ensure cost-effective material and service sourcing
  
  

• Work with project leadership to ensure all work meets applicable codes, standards, and contract requirements
• Participate in QA/QC processes, inspections, and documentation
• Support jobsite safety initiatives and compliance with company and regulatory requirements
  
  

• Act as a liaison between field teams, subcontractors, vendors, and clients
• Assist in coordinating project meetings, documenting minutes, and tracking action items
• Provide timely updates on project progress, risks, and key decisions
  
  

• Identify potential risks, delays, or field issues and help develop solutions with project leadership
• Support resolution of construction challenges to keep projects on schedule and within budget
  
  

• Bachelor’s degree in Construction Management, Engineering, or a related field (or equivalent experience)
• Strong organizational skills with the ability to manage multiple priorities
• Excellent communication and interpersonal skills
• Proficiency in Microsoft Office (Word, Excel) and construction software such as Bluebeam or similar tools
• Positive, team-oriented attitude with a strong work ethic
• Ability to thrive in a fast-paced, dynamic construction environment and adapt to new technologies
  
  

• Full-time position, with an average of 58 hours a week
• Competitive salary (commensurate with experience)
• Comprehensive benefits package including health insurance, 401(k), and paid time off
  
  

• Lead and Mentor Your DVM Team: You will manage all associate veterinarians, conducting regular performance discussions, coaching them on individual development goals (including production and PCT), and fostering a culture of teamwork and retention.
• Role Model Medical Excellence: You will set the example for the highest quality of medicine, client service, and efficiency, while also practicing as an associate veterinarian and achieving your own production goals.
• Drive Hospital Performance: In partnership with your Practice Manager, you will help develop the annual operating plan, manage hospital financial performance toward an EBITDA goal, and ensure compliance with all medical and DEA regulations.
• Foster a Culture of Growth: You will lead monthly doctor meetings to discuss best practices, new services, and medical standards. You will also supervise externship and mentorship programs and champion a culture of recruitment.
• Be an Ambassador: You will serve as an ambassador for your hospital and Mission Pet Health through community engagement at schools, universities, and local events.

• Doctor of Veterinary Medicine (DVM) degree and a valid state license in good standing.
• A minimum of 2 years of practical clinical experience.
• A servant leadership mentality with a commitment to our core values and the ability to build strong, collaborative relationships.
• Excellent written, verbal, and interpersonal communication skills.
• An understanding of (or willingness to learn) the financial and operating management of a hospital.
• Proficiency in intermediate computer skills (MS Office, Outlook, etc.).
• Enthusiasm and a desire to be part of a progressive, growth-oriented culture.

DUTIES:

• Perform preventative maintenance on equipment.
• Provide technical troubleshooting, diagnostics, and repair of critical equipment.
• Read and work from maintenance manuals, electrical schematics, and parts lists to troubleshoot and repair equipment.
• Inspect machines routinely to ensure proper function and efficiency.
• Follow a set PM schedule and procedure on all equipment.
• Operates cutting torch or welding equipment to cut or join metal parts.
• Repair and maintain physical structure of facility (interior and exterior).
• Help maintain good housekeeping in work areas.
• Adhere to lockout tagout procedure and preforms all work safely.
• Comply with all company policies and procedures.
• Additional duties as assigned by management.

REQUIREMENTS/EXPERIENCE

• High school diploma or GED required.
• Previous experience in the corrugated industry is a plus.
• 1-3 years of previous general maintenance and repair experience.
• Able to read schematics (electrical, pneumatic, and hydraulic).
• Strong electrical knowledge and troubleshooting skills preferred.

Equal Opportunity Employer
This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Sr. Engineering Manager - Pleasant Prairie (Kenosha, WI)

Sanmina Corporation (Nasdaq: SANM) is a leading integrated manufacturing solutions provider serving the fastest growing segments of the global Electronics Manufacturing Services (EMS) market. Recognized as a technology leader, Sanmina Corporation provides end-to-end manufacturing solutions, delivering superior quality and support to Original Equipment Manufacturers (OEMs) primarily in the communications networks, defense and aerospace, industrial and semiconductor systems, medical, multimedia, computing and storage, automotive and clean technology sectors. Sanmina Corporation has facilities strategically located in key regions throughout the world.

Job Purpose

Oversees the planning, development, implementation and maintenance of manufacturing methods, processes and operations for new and existing products. Manages the activities of the team and is responsible for staffing decisions, training and development, and performance management of the staff. Ensures the effective use of materials, equipment, and personnel in producing quality products at minimum costs. Acts as liaison with engineering in releasing new products. Develops systems to maintain reports and record keeping of company products. Selects, develops, and evaluates personnel to ensure the efficient operation of the function.

Specific Duties & Responsibilities

• Leads and manages the operations functions, which may include production manufacturing engineering, manufacturing process, quality, and activities from production planning to shipment. He/she drives the production team to implement improvements on quality, efficiency, and cost reduction.
• This position oversees Product, Process and Test Engineering departments.
• Receives assignments in the form of objectives and establishes goals to meet objectives.
• Provides guidance to subordinates to achieve goals in accordance with established policies.
• Work is reviewed and measured based on meeting objectives and schedules.
• Establishes and recommends changes to policies which effect immediate organization(s).
• Works on issues of diverse scope where analysis of situation or data requires evaluation of a variety of factors, including an understanding of current business trends.
• Follows processes and operational policies in selecting methods and techniques for obtaining solutions.
• Acts as advisor to subordinate(s) to meet schedules and/or resolve technical problems.
• Develops and administers schedules and performance requirements.
• Responsible for selecting and developing people, and provides leadership to engineering groups.
• Works with employees to plan, assign, and monitor individual objectives of unit members, based on overall group objectives and priorities. Responsible for providing timely and useful feedback to staff members on their performance and development plans.
• Participates in the operations engineering work within the unit by overseeing and advising others, or by contributing directly to the development of complex solutions.
• Helps to define requirements, plans, schedules resources effectively, monitors achievements and costs, and removes barriers to the group's success.
• Provides guidance and advice to group members related to their approaches and methodologies in pursuing their assigned responsibilities.
• Manages the schedule of deliverables agreed to for the engineering units overall.

Education and Experience

• BS in Mechanical, Electrical, Manufacturing or Industrial Engineering required.
• 8+ years engineering management experience required.
• Familiarity with design for manufacturability, considering a balance of cost, serviceability, manufacturability, reliability, assembly time and quality.
• Expertise in parts fabrication techniques, including; molding, precision machining casting, sheet metal fabrication, welding, cable assembly, etc.
• Excellent small cross-functional team leadership skills
• Functional management ability, including recruiting, skills and career development, goals and objectives setting and management, performance management
• Experience with budgeting managing to a budget and headcount planning
• Verbal presentation skills commensurate with a technical audience
• Successful candidate must be a US Citizen or Green Card Holder.
• Must be able to communicate effectively in both written and spoken English

Sanmina is an Equal Opportunity Employer

Job Title : Nuclear Engineer (Naval Reactors Engineer) Category / Component : Officer • Active Overview Design, regulate, and oversee the Navy's nuclear propulsion program, including reactor design, fleet operations, and eventual defueling and decommissioning of nuclear powered ships and submarines from Naval Reactors Headquarters and associated Department of Energy laboratories and shipyards.

Key Responsibilities Provide technical direction in areas such as reactor and fluid systems design, reactor physics, materials development, component design for steam generators, pumps, and valves, instrumentation and control for reactor and propulsion plants, testing and quality control, radiation shielding, and chemistry and radiological controls; review designs and analyses from laboratories, shipyards, and industry partners; coordinate with fleet units to ensure safe and reliable nuclear plant operation.

What to Expect Assume significant technical responsibility early in your career as part of a lean headquarters staff; work primarily in an analytical and oversight role rather than operating plants at sea; balance long term engineering projects with time sensitive fleet and shipyard issues; frequent coordination with senior civilian engineers, naval officers, and technical teams; high expectations for attention to detail, judgment, and written and oral communication.

Work Environment Work mainly at Naval Reactors Headquarters in the Washington, District of Columbia area with regular engagement with Department of Energy laboratories, nuclear training sites, shipyards, and nuclear powered ships and submarines; office based work that includes document reviews, technical meetings, inspections, and site visits rather than day to day shipboard watchstanding.

Pathways, Training & Advancement Officer commissioning through programs such as Officer Candidate School or the Nuclear Propulsion Officer Candidate program followed by a structured technical qualification program at Naval Reactors; rotational exposure to laboratories, prototypes, shipyards, and fleet support issues; progressive responsibility leading projects and becoming a subject matter expert, with opportunities for professional military education and advanced graduate study in technical fields.

Entry through the Nuclear Propulsion Officer Candidate program for qualified college students and recent graduates, or selection via Officer Candidate School for those who already hold qualifying degrees; all applicants must meet Nuclear Propulsion Program academic and technical screening standards in addition to general officer commissioning requirements.

Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy.

Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter.

Additional qualifications for this job may include: Completion of a rigorous technical degree in engineering, physics, mathematics, or a closely related field that includes strong backgrounds in calculus and physics; outstanding academic record, particularly in technical coursework; United States citizenship and eligibility for a high level security clearance; strong technical aptitude and comfort with detailed analytical work.

Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities.

Specific options depend on the Sailor's status, training, and current Navy policy.

Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options.

Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance.

Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed.

Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source.

Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community.

It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes.

Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.

Build. Optimize. Scale.

GZ Printpak LLC is a U.S. manufacturer of high-quality paper packaging for consumer and luxury brands. Located in Mount Pleasant, Wisconsin, the company is part of GZ Media's international print and packaging division, which brings decades of engineering and manufacturing expertise to advanced packaging production.

As our U.S. facility continues to ramp up operations, we are seeking a Process Engineer who will take ownership of our production technology and ensure that our manufacturing lines run reliably, efficiently, and at the highest quality standards.

This is a hands-on engineering role focused on process ownership, production performance, and continuous improvement in a growing manufacturing environment.

Position Summary

The Process Engineer is responsible for the performance, stability, and optimization of manufacturing processes on our production lines. This role works closely with production, maintenance, and quality teams to ensure machines run consistently, produce high-quality parts, and operate at optimal efficiency.

The ideal candidate combines strong technical knowledge with a practical, hands-on approach to troubleshooting, process improvement, and operational support.

Key Responsibilities

• Own the manufacturing process for assigned production lines, ensuring stable, efficient, and high-quality production.
• Monitor production performance and analyze data to identify opportunities for process improvements and increased efficiency.
• Troubleshoot process issues, equipment behavior, and product quality deviations to quickly restore stable production.
• Work closely with operators and maintenance technicians to resolve technical challenges and improve machine performance.
• Develop and maintain process documentation, operating procedures, and setup instructions.
• Lead or support continuous improvement initiatives using Lean and data-driven methodologies.
• Implement process changes that improve reliability, throughput, and product quality.
• Support training for operators and technicians on process standards and best practices.
• Collaborate with equipment suppliers and internal teams when implementing process upgrades or technical improvements.
• Promote safe, standardized, and efficient manufacturing practices across the production floor.

Qualifications

• Bachelor's degree in Mechanical Engineering, Industrial Engineering, Manufacturing Engineering, or a related technical field.
• 3–5+ years of experience in a manufacturing engineering or process engineering role.
• Experience working with industrial production equipment and manufacturing processes.
• Strong analytical and problem-solving skills with the ability to translate production data into actionable improvements.
• Experience with Lean manufacturing, continuous improvement, or Six Sigma methodologies preferred.
• Ability to work collaboratively with production, maintenance, and quality teams.
• Hands-on mindset with the ability to troubleshoot and improve real-world manufacturing processes.

What We Offer

• Health, dental, and vision insurance
• 401k with company match
• Paid time off and company holidays
• Opportunity to take ownership of critical manufacturing technology in a growing U.S. operation backed by a global manufacturing leader

Join GZ Printpak

At GZ Printpak, engineers play a direct role in shaping how our manufacturing systems perform and evolve. If you enjoy solving real production challenges, improving complex processes, and taking ownership of manufacturing technology, we'd love to hear from you.

Equal Employment Opportunity

• GZ Printpak LLC is committed to providing equal employment opportunities to all employees and applicants. Employment decisions are made without regard to race, color, religion, sex, sexual orientation, gender identity or expression, national origin, age, disability, veteran status, or any other protected characteristic under federal, state, or local law.

Cutting Edge Design I Collaborative Team I Work with Major OEMs | Grow Your Design Skills

Drewco in Franksville, WI, is hiring a Design Engineer to work on unique, custom-tooling projects that require creativity, collaboration, and mechanical thinking. You can expect to develop your skills quickly in a hands-on, supportive engineering environment and move into taking on one-of-a-kind, interesting projects.

*Easy access off I-94, so great opportunity for anyone in Racine, Kenosha, or Southern Milwaukee Counties

What You’ll Do

• Design workholding and custom tooling in SolidWorks

• Work directly with customers to understand requirements

• Create 3D models, assemblies, layouts, and detailed component drawings

• Calculate dimensions, clearances, and tolerances (GD&T) and create BOMs for manufacturing

• Collaborate with engineering, the shop floor, and sales

• Review your own work and assist in checking others’

• Manage projects from concept through release

What You’ll Bring to the Team

• A commitment to quality, precision, and continuous improvement

• A self-motivated attitude with the ability to learn independently and work through challenging problems

• Natural mechanical intuition, ideally supported by hands-on manufacturing or shop experience

Requirements:

• Bachelor’s degree in Mechanical Engineering (minimum two-year technical degree considered)

• 2+ years of mechanical design experience in a 3D modeling application

• CAD proficiency required, SolidWorks preferred.

• Experience detailing components.

• Prior mechanical component or assembly design

• Comfort spending most of your day on a computer, modeling and refining designs.

Preferred: fixturing/workholding, machining, or shop-floor experience

Benefits:

Drewco provides a competitive pay and benefits package, including flexible start times, health insurance, 401K, profit sharing, and a relaxed, friendly, productive environment.

Why Drewco?

At Drewco, we create one-of-a-kind workholding and tooling solutions for leading manufacturers across automotive, agriculture, mining, defense, and gear industries. We value collaboration, hands-on problem-solving, and engineers who take ownership of their work. Here, your designs come to life on real shop floors, you collaborate directly with customers and management, and your ideas make a tangible impact every day.

At a Glance

• 
  
• Company: Tecomet (Full Time Position)
  
• Location: Somers, WI
  
• Job Type: Full-Time | Contract | On-Site
  
• Shift: Flexible / TBD
  
• Pay Range: $30.00 – $35.00/hour
  
• Work Authorization: U.S. Citizen or Green Card (ITAR compliance)
  

---

Why This Role Exists

Tecomet is a global leader in high-precision manufacturing for the medical, aerospace, and defense sectors. We're hiring an experienced EDM Sinker – CNC Machinist III for a full-time opportunity to support mission-critical work involving precision-machined components.

This role focuses on operating and setting up EDM sinkers, mills, lathes, and wire EDM machines in a clean, well-maintained manufacturing environment. You'll play a key role in meeting high-tolerance, high-impact production goals.

---

The Work You’ll Be Doing

• 
  
• Set up and operate EDM sinkers, CNC mills, lathes, and wire EDMs
  
• Read and evaluate blueprints, specifications, and technical drawings
  
• Propose new setups and adjust tooling, offsets, and feeds/speeds
  
• Troubleshoot CNC programs and machining issues
  
• Perform in-process inspections using micrometers, indicators, and calipers
  
• Collaborate with Engineering on fixture design and process improvements
  
• Maintain production records and follow GMP/GDP documentation standards
  
• Support 5S, Lean, and continuous improvement initiatives
  
• Adhere to strict safety, quality, and preventative maintenance practices
  

---

Machines, Materials & Tools

• 
  
• Machine Types: EDM sinkers, CNC mills, CNC lathes, wire EDMs
  
• Tools: Micrometers, calipers, indicators, hand deburring tools
  
• Controls: G-code familiarity and minor programming required
  

---

What We’re Looking For

Required:

• 
  
• 5+ years of CNC machining experience (EDM preferred)
  
• High School Diploma or GED
  
• Strong setup skills across multiple machine platforms
  
• Ability to troubleshoot and make minor program edits
  
• Solid math, measurement, and blueprint reading skills
  
• U.S. Person status for ITAR compliance
  

Preferred:

• 
  
• Associate’s degree or Machinist apprenticeship
  
• Familiarity with medical/aerospace standards
  
• Background in multi-axis machining and advanced materials
  

---

Why Work with Tecomet

• 
  
• Full time Opportunity at a highly respected precision manufacturing company
  
• Work with advanced machining technology in a climate-controlled environment
  
• Competitive hourly rate: $30–$35/hour
  
• Make an immediate impact supporting critical industries
  

---

Apply Now

If you're a skilled EDM or CNC Machinist looking for a high-impact contract role in a professional shop environment, Tecomet is hiring now.

Apply today or message us to learn more.

Putzmeister Inc

Business Project Manager

Sturtevant, WI

Summary: The Business Project Manager will report to the President and lead the completion of key business initiatives. These initiatives will focus on areas such as sales channel development, product marketing projects, product launch projects, business efficiency initiatives, and organizational development efforts. The Business Project Manager will collaborate across departments to ensure projects stay on schedule and achieve their objectives. These projects are typically large, lasting between 6 months and 18 months. This is a crucial role, a role of internal consultant for key business initiatives, that will support the company's growth and offer valuable cross-departmental experience for the Business Project Manager.

Essential Duties and Responsibilities:

• Define project scope, objectives, and deliverables in collaboration with departments.

• Develop detailed project plans, schedules, and budgets that ensure compliance with standards.

• Facilitate and collaborate with departments to complete projects on time.

• Execution, monitoring, and tracking project progress and performance, managing changes, and maintaining quality standards.

• Provide regular updates and reports to leadership.

• Identify potential issues, develop improvement strategies, and resolve obstacles.

• Improve company efficiency, reduce costs, and increase business growth.

• Serve as the key link to ensure alignment with company strategy.

• Drive engagement and influence decision-making to align project results with business objectives.

• Performs additional duties as assigned or directed.

Qualifications:

• Business consultancy experience preferred.

• Minimum of 5 years of project management experience within the manufacturing industry.

• Proven ability to manage complex projects

• High-level analytical, problem-solving, and decision-making skills

• Excellent interpersonal and communication skills

• Solid technical skills combined with a strong business understanding

• Self-motivated individual capable of working independently and in team settings

• Strong work ethic

• Willing and able to travel up to 35% as needed

Education/Certification/Training:

• Bachelor's degree in business or engineering with a minor in business

Work Environment/Physical Demands:

 While performing the duties of this job, the employee is in a typical office or shop environment; occasionally exposed to noise, dust, and chemicals.

 Safety glasses/goggles must always be worn while in the shop or yard.

The physical demands described here are representative of those that an employee must meet to perform the essential functions of this job successfully. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job.

The above information includes the general details necessary to describe the principal duties of the job identified. It shall not be interpreted as a detailed description of all the work requirements that may be inherent in the job.