Engineering Structures Jobs in Salem Virginia Remote
432 positions found — Page 2
This role involves prescription fulfillment, IV preparation, data entry, and inventory management in a fast-paced, regulated environment.
Key Responsibilities Work under direct supervision of a Registered Pharmacist to fill prescriptions and prepare IV medications Enter prescription and billing data into the system to support accurate processing and reimbursement Assist in prepackaging medications in compliance with pharmacy standards and government regulations Support the Pharmacist in final prescription checks, including medication staging and packaging Coordinate accurate and timely delivery of medications to customers Maintain inventory by receiving, rotating, and tracking medications and supplies, including lot numbers and expiration dates Assist with physical inventory counts and inventory control practices Ensure a clean, safe, and organized work environment Check equipment for proper calibration, safety, and cleanliness Qualifications High school diploma or equivalent required Previous pharmacy technician experience preferred Experience with IV preparation is a plus Basic computer and data entry skills required Strong attention to detail and organizational skills Ability to work efficiently in a team-oriented environment Understanding of pharmacy regulations and procedures preferred Additional Information Consistent weekday schedule with no required overtime Opportunity to work in a structured and supportive pharmacy setting Qualified candidates are encouraged to apply for immediate consideration.
Offering an exceptional opportunity, Carilion Clinic (CC), Virginia Tech Carilion School of Medicine (VTCSOM), and the Department of Surgery, Section of Dental Care in Roanoke, Virginia are searching for an Orthodontist to join our growing team of 11 dentists, 5 General Practice residents, 24 dental assistants, 5 dental hygienists, and 18 non-clinical support staff in a clinic-based, academic program with remarkable prospects in teaching, research, and clinical dentistry. Full-time dental specialists include pediatric dentistry, orthodontics, and prosthodontics. The Section includes a separate Family Dental Practice located in Roanoke. Carilion Clinic offers the most advanced in-hospital dental care in the region, with inpatient and outpatient services, as well as a pediatric dental program. Carilion's Cleft and Craniofacial Center is American Cleft Palate Craniofacial Association (ACPA)-approved. The CC-VTCSOM General Dental Residency program offers a unique educational experience with robust exposure to managing patients with special healthcare needs and the core values of lifelong learning and service to the specialty and community by way of a structured faculty-directed curriculum.
Qualified applicants will have completed a CODA-accredited Orthodontics residency program and be Board Certified or Board Eligible in Orthodontics by the ABO.
This position offers teaching opportunities and faculty appointment through its affiliation with the VTCSOM and offers research opportunities through the Fralin Biomedical Research Institute (FBRI) and other affiliations. Based in the Level-1 763-bed trauma and academic health center, Carilion Roanoke Memorial Hospital/Carilion Children’s Hospital, our program provides comprehensive coverage to over one million people in a large, rural, multi-state area.
Carilion Clinic is a progressive, emerging leader in American healthcare dedicated to improving outcomes and enhancing value for every patient, while advancing the quality of care through medical education and research. A physician-led, multi-specialty, not-for-profit healthcare organization based in Roanoke, Virginia, Carilion Clinic operates 7 hospitals, 282 outpatient clinics, 850 physicians representing more than 85+ specialties, along with 350 residents and fellows in 30 accredited ACGME programs. Education and research activities and opportunities abound through our intimate relationships with the VTCSOM, the FBRI at VTC, Virginia Tech proper, and Radford University. We are actively involved in the education of medical students, residents from multiple CC-VTCSOM training programs, allied health science students, and Virginia Tech undergraduate and graduate students. The CC-VTCSOM system stands on the brink of unprecedented expansion and opportunity through the burgeoning relationship with Virginia Tech. The position requires an academic appointment at VTCSOM.
The Roanoke Valley is a metro area of 300,000 and has consistently been rated among the “best places to live” in the nation. Roanoke is located at the southern tip of Virginia's spectacularly beautiful Shenandoah Valley, surrounded by the Blue Ridge Mountains, Appalachian Trail and close to the 22,000-acre Smith Mountain Lake. The area offers sensational outdoor activities but also a surprising array of cultural activities from fine dining to multiple musical venues and playhouses, to symphonies and ballets. Access to major air-travel hubs is remarkably easy through the Roanoke-Blacksburg Regional Airport. The weather features mild winters, an abundance of sun, and extended springs and autumns. The region features top-notch schools and Universities and has been coined “the best kept secret in the East.”
To learn more about Carilion Clinic:
candidates should submit a Cover Letter and CV to:
Rob Way, Physician Recruiter, Carilion Clinic
Phone: 54 ; Email:
Carilion Clinic is an Equal Opportunity/Affirmative Action Employer: Minorities/Females/Protected Veterans/Individuals with Disabilities/Sexual Orientation/Gender Identity are encouraged to apply.
Psychiatry Opportunities
Faculty Appointment, VTCSOM Carilion Clinic, Roanoke & Christiansburg Virginia
Opportunities include:
- Ambulatory Psychiatry
- Consult Liaison Psychiatry
- Inpatient Psychiatry
- Interventional Psychiatry
Carilion Clinic in Southern Virginia’s Blue Ridge Region provides care for 26 counties and over 1 million Virginians; addiction to opioids, stimulants, nicotine, and/ or alcohol (among others) are at epidemic levels here. We are dedicated to making a difference in the lives of our patients, their families, and our communities. We offer adults and adolescents both outpatient and inpatient care at specialized facilities located in southwest Virginia. Carilion Clinic Psychiatric facilities include 61 adult beds (across two facilities) and 16 adolescent beds and multiple ambulatory sites.
Our department has implemented state-of-the-art treatment for opioid use disorder including our ED Bridge program and our inpatient Pathways program for patients with substance use disorders and infectious complications such as endocarditis and sepsis. Our department continues to evolve evidence-based treatment for multiple substance use disorders. We incorporate peer recovery specialists and a range of technology and innovative techniques in collaboration with addiction researchers at Virginia Tech and the Fralin Biomedical Research Institute. Our faculty includes psychiatrists who are board-certified in both addiction psychiatry and addiction medicine certified physicians from across Carilion, including Emergency Medicine and Ob/Gyn. We have an established Fellowship in Addiction Medicine that is part of this organizational structure. We work closely with research collaborators at the Fralin Biomedical Research Institute and the Virginia Tech Carilion School of Medicine in growing of many initiatives. We are also partnered with the Virginia Department of Health, Virginia Department of Behavioral Health and Developmental Services, and many community agencies to expand and evaluate care delivery models.
About Carilion
At Carilion, our employees know they can depend on each other to give their all every day, working together to do the job right. Our sense of family is what makes us a strong, growing organization. If you're looking for a place where talents are embraced, discoveries are made and care makes a real difference, this is where it all happens.
Together we have been recognized with designations, awards, and honors, accreditation by The Joint Commission, magnet designation by the American Nurses Credentialing Center, accreditation with commendation from the Commission on Cancer, American College of Surgeons, and five-star Excellence in Healthcare Awards for patient experience by Professional Research Consultants just to name a few.
Please contact Rob Way, 54 ,
The Numbers That Make Our System Integrated.
7 Hospitals – 81 Specialties – 800+ Physicians – 240+ Practices -- 280+ Resident/Fellows – 31 GME Programs
Equal Opportunity Employer
Minorities/Females/Protected Veterans/Individuals with Disabilities/Sexual Orientation/Gender Identity
Carilion Clinic is a drug-free workplace.
Psychiatry Opportunities
Faculty Appointment, VTCSOM Carilion Clinic, Roanoke & Christiansburg Virginia
Opportunities include:
- Ambulatory Psychiatry
- Consult Liaison Psychiatry
- Inpatient Psychiatry
- Interventional Psychiatry
Carilion Clinic in Southern Virginia’s Blue Ridge Region provides care for 26 counties and over 1 million Virginians; addiction to opioids, stimulants, nicotine, and/ or alcohol (among others) are at epidemic levels here. We are dedicated to making a difference in the lives of our patients, their families, and our communities. We offer adults and adolescents both outpatient and inpatient care at specialized facilities located in southwest Virginia. Carilion Clinic Psychiatric facilities include 61 adult beds (across two facilities) and 16 adolescent beds and multiple ambulatory sites.
Our department has implemented state-of-the-art treatment for opioid use disorder including our ED Bridge program and our inpatient Pathways program for patients with substance use disorders and infectious complications such as endocarditis and sepsis. Our department continues to evolve evidence-based treatment for multiple substance use disorders. We incorporate peer recovery specialists and a range of technology and innovative techniques in collaboration with addiction researchers at Virginia Tech and the Fralin Biomedical Research Institute. Our faculty includes psychiatrists who are board-certified in both addiction psychiatry and addiction medicine certified physicians from across Carilion, including Emergency Medicine and Ob/Gyn. We have an established Fellowship in Addiction Medicine that is part of this organizational structure. We work closely with research collaborators at the Fralin Biomedical Research Institute and the Virginia Tech Carilion School of Medicine in growing of many initiatives. We are also partnered with the Virginia Department of Health, Virginia Department of Behavioral Health and Developmental Services, and many community agencies to expand and evaluate care delivery models.
About Carilion
At Carilion, our employees know they can depend on each other to give their all every day, working together to do the job right. Our sense of family is what makes us a strong, growing organization. If you're looking for a place where talents are embraced, discoveries are made and care makes a real difference, this is where it all happens.
Together we have been recognized with designations, awards, and honors, accreditation by The Joint Commission, magnet designation by the American Nurses Credentialing Center, accreditation with commendation from the Commission on Cancer, American College of Surgeons, and five-star Excellence in Healthcare Awards for patient experience by Professional Research Consultants just to name a few.
Please contact Rob Way, 54 ,
The Numbers That Make Our System Integrated.
7 Hospitals – 81 Specialties – 800+ Physicians – 240+ Practices -- 280+ Resident/Fellows – 31 GME Programs
Equal Opportunity Employer
Minorities/Females/Protected Veterans/Individuals with Disabilities/Sexual Orientation/Gender Identity
Carilion Clinic is a drug-free workplace.
Psychiatry Opportunities
Faculty Appointment, VTCSOM Carilion Clinic, Roanoke & Christiansburg Virginia
Opportunities include:
- Ambulatory Psychiatry
- Consult Liaison Psychiatry
- Inpatient Psychiatry
- Interventional Psychiatry
Carilion Clinic in Southern Virginia’s Blue Ridge Region provides care for 26 counties and over 1 million Virginians; addiction to opioids, stimulants, nicotine, and/ or alcohol (among others) are at epidemic levels here. We are dedicated to making a difference in the lives of our patients, their families, and our communities. We offer adults and adolescents both outpatient and inpatient care at specialized facilities located in southwest Virginia. Carilion Clinic Psychiatric facilities include 61 adult beds (across two facilities) and 16 adolescent beds and multiple ambulatory sites.
Our department has implemented state-of-the-art treatment for opioid use disorder including our ED Bridge program and our inpatient Pathways program for patients with substance use disorders and infectious complications such as endocarditis and sepsis. Our department continues to evolve evidence-based treatment for multiple substance use disorders. We incorporate peer recovery specialists and a range of technology and innovative techniques in collaboration with addiction researchers at Virginia Tech and the Fralin Biomedical Research Institute. Our faculty includes psychiatrists who are board-certified in both addiction psychiatry and addiction medicine certified physicians from across Carilion, including Emergency Medicine and Ob/Gyn. We have an established Fellowship in Addiction Medicine that is part of this organizational structure. We work closely with research collaborators at the Fralin Biomedical Research Institute and the Virginia Tech Carilion School of Medicine in growing of many initiatives. We are also partnered with the Virginia Department of Health, Virginia Department of Behavioral Health and Developmental Services, and many community agencies to expand and evaluate care delivery models.
About Carilion
At Carilion, our employees know they can depend on each other to give their all every day, working together to do the job right. Our sense of family is what makes us a strong, growing organization. If you're looking for a place where talents are embraced, discoveries are made and care makes a real difference, this is where it all happens.
Together we have been recognized with designations, awards, and honors, accreditation by The Joint Commission, magnet designation by the American Nurses Credentialing Center, accreditation with commendation from the Commission on Cancer, American College of Surgeons, and five-star Excellence in Healthcare Awards for patient experience by Professional Research Consultants just to name a few.
Please contact Rob Way, 54 ,
The Numbers That Make Our System Integrated.
7 Hospitals – 81 Specialties – 800+ Physicians – 240+ Practices -- 280+ Resident/Fellows – 31 GME Programs
Equal Opportunity Employer
Minorities/Females/Protected Veterans/Individuals with Disabilities/Sexual Orientation/Gender Identity
Carilion Clinic is a drug-free workplace.
Psychiatrist, Inpatient and Ambulatory
Carilion Clinic, VTCSOM, Department of Psychiatry and Behavioral Medicine.
Roanoke & Christiansburg Region, Virginia
A full-time psychiatrist position supporting Inpatient Psychiatry in both Roanoke and Christiansburg with Ambulatory responsibility in the department's Gaining Access to Care Clinic (GAP) and Emergency Department.
Diagnose and treat human disease, illness and injuries and practice evidence-based medicine. Prescribe medically necessary medications and treatments. May serve on various Carilion and/or hospital committees. Completes necessary documentation for patients Health Information record.Carilion Clinic in Southern Virginia’s Blue Ridge Region provides care for 26 counties and over 1 million Virginians; addiction to opioids, stimulants, nicotine, and/ or alcohol (among others) are at epidemic levels here. We are dedicated to making a difference in the lives of our patients, their families, and our communities. We offer adults and adolescents both outpatient and inpatient care at specialized facilities located in southwest Virginia. Carilion Clinic Psychiatric facilities include 61 adult beds (across two facilities) and 16 adolescent beds and multiple ambulatory sites.
Our department has implemented state-of-the-art treatment for opioid use disorder including our ED Bridge program and our inpatient Pathways program for patients with substance use disorders and infectious complications such as endocarditis and sepsis. Our department continues to evolve evidence-based treatment for multiple substance use disorders. We incorporate peer recovery specialists and a range of technology and innovative techniques in collaboration with addiction researchers at Virginia Tech and the Fralin Biomedical Research Institute. Our faculty includes psychiatrists who are board-certified in both addiction psychiatry and addiction medicine certified physicians from across Carilion, including Emergency Medicine and Ob/Gyn. We have an established Fellowship in Addiction Medicine that is part of this organizational structure. We work closely with research collaborators at the Fralin Biomedical Research Institute and the Virginia Tech Carilion School of Medicine in growing of many initiatives. We are also partnered with the Virginia Department of Health, Virginia Department of Behavioral Health and Developmental Services, and many community agencies to expand and evaluate care delivery models.
About Carilion
At Carilion, our employees know they can depend on each other to give their all every day, working together to do the job right. Our sense of family is what makes us a strong, growing organization. If you're looking for a place where talents are embraced, discoveries are made and care makes a real difference, this is where it all happens.
Together we have been recognized with designations, awards, and honors, accreditation by The Joint Commission, magnet designation by the American Nurses Credentialing Center, accreditation with commendation from the Commission on Cancer, American College of Surgeons, and five-star Excellence in Healthcare Awards for patient experience by Professional Research Consultants just to name a few.
Please contact Rob Way, 54 ,
The Numbers That Make Our System Integrated.
7 Hospitals – 81 Specialties – 800+ Physicians – 240+ Practices -- 280+ Resident/Fellows – 31 GME Programs
Equal Opportunity Employer
Minorities/Females/Protected Veterans/Individuals with Disabilities/Sexual Orientation/Gender Identity
Carilion Clinic is a drug-free workplace.
Responsibilities include:
Providing daily supervision and mentorship
Managing household routines and student schedules
Administering medications and ensuring student wellness
Driving students to activities, as well as planning and actively engaging in developmental and recreational activities with students
Leading daily devotions and accompanying students to Sunday Chapel
Overseeing budgeting and household reporting
Upon hire, Flex Houseparents initially support various student homes and follow a working schedule of nine consecutive days on duty, followed by three days off.
On weekdays, houseparents have unscheduled time while students are in school. Flex Houseparents eventually transition into a Placed Houseparent role, where they live and work with the same group of students in their own student home. Benefits include:
Salary: $44,768.00 per person (approximately $168,000 total compensation per couple, including free housing, meals while on duty, utilities, and more)
Comprehensive benefits: medical, dental, and vision insurance; health savings and flexible spending accounts; life insurance; disability options; retirement savings
Relocation assistance and paid training provided
Paid time off provided at designated times throughout the year
Qualifications: Qualifications include:
Experience working or volunteering with youth
This is a two-person role for couples legally married for at least two years
Both spouses must be age 27 or older
No more than three dependent children may reside in the student home
Commitment to a smoke-free and weapon-free campus; no alcohol permitted while on duty
Pet limitations: only fish and one dog of approved breeds allowed
Valid U.S. driver’s license and ability to become certified to drive student home vans
Comfort leading students in daily devotions and accompanying them to Judeo-Christian Sunday Chapel services (proselytizing prohibited)
High school diploma or GED required
Ability to lift to 50 lbs.
Demonstrated integrity and professionalism; MHS staff serve as role models for students
This is a unique, challenging, and rewarding career and life choice that requires a high level of commitment to student success from both spouses. For consideration, both spouses must complete individual employment applications. To learn more and apply, visit
/>
.
Journeys is a teen retail leader with an emphasis on footwear and unique specialty items including apparel, backpacks, hats and accessories. With more than 800 stores in all 50 US states, Puerto Rico and Canada, Journeys offers the most popular brands that cater to the teen lifestyle such as Converse, Vans, Dr Martens, UGG, Adidas, Timberland, Birkenstock, Crocs and Hey Dude. Through strategic artistic partnerships, event sponsorships, exclusive content, creative collaborations with musicians, and a focus on giving back to the community through charitable events and volunteer programs Journeys has become more than just a retailer, but a universal part of teen and youth culture. The in-store Journeys experience features an energetic environment, friendly, passionate staff, and an inclusive atmosphere where self-expression is not just accepted but encouraged and embraced. Journeys is an attitude you can wear.
Journeys is always looking for great people to join our team!
Why Work For Journeys?
- We celebrate and reward success!
- Rapid promotion opportunities for top performers - we promote from within
- We are a family with an Attitude That Cares
- We encourage you to embrace your individuality
- You get to work in a fun environment with the coolest people around
- We conduct business with integrity and passion
- Excellent benefits and employee discount
- Compensation includes base pay, sales commission, and bonus potential*
Job Summary
To provide a fun and memorable shopping experience at Journeys while assisting with basic store operations and achieving store and personal sales goals and standards of performance.
Essential Job Functions
- Meet and exceed store and personal sales goals and standards of performance
- Perform all Operation/Loss Prevention procedures accurately according to policies
- Maintain store appearance and stockroom organization
- Effectively communicate all store needs to store management
- Stay informed of current fashion trends
- Complete all point of sale functions as required
- Complete all assigned tasks and responsibilities promptly
- Provide a fun, full service experience to all customers
- Complete all required training
- Understand the Journeys culture and demonstrate it to the team
Requirements
- Prior retail sales experience preferred
- Ability to multi-task in a fast-paced environment
- Excellent interpersonal and customer service skills
- Desire to succeed in fast-paced retail environment
- Willingness to learn
- Ability to work night and weekend shifts
- Ability to climb, reach, bend, and lift up to 50 pounds
- Stand for long periods of time
- Must be at least 16 years of age*
*Age requirements for part-time employment may vary based on state
Pay And Benefits
Check out the following website for more information on all our awesome benefits: pay rate, commission, and bonus structure varies per job title, county, city, state or province. Benefits offered may include medical, vision, and dental insurance, a vacation package, and community service hours but may also vary by state, province, or territory. For clarification, refer to
Pre-application Disclosures
Equal employment opportunity is provided to all employees and applicants for employment without regard to race, color, sex, religion, national origin, age, veteran status, pregnancy, childbirth, or related medical condition, physical or mental disability of otherwise qualified individuals, medical condition, genetic information, sexual orientation, citizenship, marital or registered domestic/civil union partner status, gender identity and/or expression, or any other factor that the law protects from employment discrimination. All employment decisions are based on business needs, job requirements and individual qualifications. This policy applies to all terms and conditions of employment, including, but not limited to, recruitment and hiring, placement, promotion, termination, reductions in force, recall, transfer, leaves of absence, compensation and training. Any applicant or employee who needs a reasonable accommodation to apply for employment or to perform the essential functions of his or her job should email or call (615) 367-7467. Genesco's employment practices will continue to be directed toward full utilization of all available human resources. We believe that this approach to our human resources is not only legally and morally proper, but also is an intelligent and economic business practice.
On the heels of achieving 3X growth, Virginia Transformer is hiring to do it again!
We're strategically building our team for the next 3X growth cycle — a phase that is both intense and incredibly rewarding. We're highly selective about who joins us, because this journey isn't for everyone.
If you have the drive, grit, and expertise to perform at a high level — and you want to grow your career 3X alongside the Company's growth — we'd love to talk.
Apply below and let's start the conversation.
Who We Are
Virginia Transformer is the largest U.S.-owned producer of power transformers in North America, and we've been able to grow the past 50-plus years through an unwavering focus on delivering for our customers. We're more than 5,400 people strong and are known throughout the industry for being an engineering company that makes premium quality transformers in the shortest lead times.
As a privately held, organically growing company, we thrive on nimbleness, innovation, and tenacity.
Join Our Team
If you love the thrill of securing the U.S. electric grid, enabling all manufacturing in the country, and the energy of a fast-moving train — this is the place for you. We train hard, grow together, and lead with purpose. Every transformer we build is custom, every challenge unique, and every team member essential.
We're looking for those ready to lead, fueled by commitment, and driven by impact. We are growing so fast that all our available roles are not yet posted, so let us know if you are interested and we will follow-up.
Job Title: Director of Mechanical Engineering
Location: Roanoke, VA (On-site, with regular travel to multiple U.S. plants)
About the Role
Virginia Transformer Corporation is seeking a hands-on Director of Mechanical Engineering to lead the mechanical design and development function across six manufacturing plants. The ideal candidate will bring deep technical expertise in mechanical systems, metallurgy, and polymers, along with strong leadership experience in custom electromechanical equipment design.
This role will be responsible for standardizing design practices, improving manufacturability, and ensuring all mechanical designs meet rigorous standards of quality, performance, and safety. You will collaborate closely with plant-level engineering teams, corporate R&D, sourcing, and vendor quality to drive innovation, consistency, and cost optimization across the organization.
Key Responsibilities
Leadership & Strategy
- Lead, mentor, and develop a team of mechanical design engineers across multiple sites, fostering a culture of excellence, accountability, and continuous improvement.
- Ensure consistent application of the mechanical design manual and design standards across all six plants.
- Partner with corporate R&D to advance new mechanical design initiatives and introduce innovative materials, features, and product enhancements.
- Define and track key performance indicators (KPIs) for the design teams, driving measurable improvement in design quality, efficiency, and throughput.
Design & Engineering Execution
- Oversee the design and development of mechanical assemblies, ensuring manufacturability, reliability, and cost-effectiveness.
- Provide direct, hands-on technical support when needed — including concept development, modeling, and problem-solving for complex design challenges.
- Apply deep understanding of metallurgy, polymers, and material properties to improve product performance, longevity, and thermal characteristics.
- Establish, update, and enforce design automation and process assurance systems to maintain consistency and reduce variability in mechanical design outputs.
- Review and approve detailed mechanical drawings, design calculations, and documentation for accuracy and compliance with internal and industry standards.
Cross-Functional Collaboration
- Partner with Sourcing and Vendor Quality Assurance to qualify suppliers and evaluate materials or components for new or alternative sourcing.
- Participate in design reviews, non-conformance investigations (NCRs), and root cause/corrective action efforts to resolve mechanical and manufacturing issues.
- Work closely with plant management and production teams to ensure mechanical designs support operational goals and manufacturability.
- Collaborate with Safety and Compliance functions to ensure adherence to industry, regulatory, and environmental standards.
Qualifications
- Bachelors degree in mechanical engineering, Master's degree in mechanical engineering preferred. PE is a plus.
- Minimum 15-20 years of experience in thermo-mechanical design of custom electromechanical equipment, with at least 5 years in a senior management or multi-site leadership role.
- Proven background in metallurgy, polymers, material science, or industrial product design from manufacturing, energy, aerospace, rail, or related industries.
- Strong knowledge of FEA/FEM analytical tools, CAD systems, and 3D design platforms (SolidWorks, Creo, or equivalent).
- Demonstrated success leading engineering teams in a plant, multi plant or global manufacturing environment.
Skills & Attributes
- Expert-level proficiency in CAD design practices, finite element modeling, and mechanical systems analysis.
- Deep technical understanding of materials, thermal performance, stress analysis, and mechanical reliability.
- Hands-on problem solver with a proactive, floor-level approach to engineering challenges.
- Exceptional communication and collaboration skills, able to influence across engineering, operations, and executive leadership.
- Strong organizational ability to lead large engineering teams (100+ engineers) across multiple sites.
- Strategic mindset with operational discipline — balancing innovation with manufacturability and cost control.
Why Join Us
At Virginia Transformer, you'll have the opportunity to shape the mechanical engineering vision for North America's leading manufacturer of custom power transformers. This role combines hands-on technical leadership with strategic influence, ensuring that innovation, reliability, and precision remain at the heart of every product we build.
Job Title : Nuclear Engineer (Naval Reactors Engineer) Category / Component : Officer • Active Overview Design, regulate, and oversee the Navy's nuclear propulsion program, including reactor design, fleet operations, and eventual defueling and decommissioning of nuclear powered ships and submarines from Naval Reactors Headquarters and associated Department of Energy laboratories and shipyards.
Key Responsibilities Provide technical direction in areas such as reactor and fluid systems design, reactor physics, materials development, component design for steam generators, pumps, and valves, instrumentation and control for reactor and propulsion plants, testing and quality control, radiation shielding, and chemistry and radiological controls; review designs and analyses from laboratories, shipyards, and industry partners; coordinate with fleet units to ensure safe and reliable nuclear plant operation.
What to Expect Assume significant technical responsibility early in your career as part of a lean headquarters staff; work primarily in an analytical and oversight role rather than operating plants at sea; balance long term engineering projects with time sensitive fleet and shipyard issues; frequent coordination with senior civilian engineers, naval officers, and technical teams; high expectations for attention to detail, judgment, and written and oral communication.
Work Environment Work mainly at Naval Reactors Headquarters in the Washington, District of Columbia area with regular engagement with Department of Energy laboratories, nuclear training sites, shipyards, and nuclear powered ships and submarines; office based work that includes document reviews, technical meetings, inspections, and site visits rather than day to day shipboard watchstanding.
Pathways, Training & Advancement Officer commissioning through programs such as Officer Candidate School or the Nuclear Propulsion Officer Candidate program followed by a structured technical qualification program at Naval Reactors; rotational exposure to laboratories, prototypes, shipyards, and fleet support issues; progressive responsibility leading projects and becoming a subject matter expert, with opportunities for professional military education and advanced graduate study in technical fields.
Entry through the Nuclear Propulsion Officer Candidate program for qualified college students and recent graduates, or selection via Officer Candidate School for those who already hold qualifying degrees; all applicants must meet Nuclear Propulsion Program academic and technical screening standards in addition to general officer commissioning requirements.
Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy.
Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter.
Additional qualifications for this job may include: Completion of a rigorous technical degree in engineering, physics, mathematics, or a closely related field that includes strong backgrounds in calculus and physics; outstanding academic record, particularly in technical coursework; United States citizenship and eligibility for a high level security clearance; strong technical aptitude and comfort with detailed analytical work.
Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities.
Specific options depend on the Sailor's status, training, and current Navy policy.
Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options.
Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance.
Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed.
Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source.
Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community.
It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes.
Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.
*At Securian Financial the internal position title isEngineering Senior Analyst or Engineering Consultant. The title and salary will be determined based on experience and applied skills.*
Position Summary:
Are you a hands-on engineer who enjoys designing, building, and supporting modern communication platforms? Do you like solving complex problems and working with teams that move quickly from idea to delivery? This role offers the opportunity to make an immediate impact.
As a member of the Telephony and Contact Center Technologies team, you will design, engineer, implement, and support Securian's enterprise telephony and contact center platforms. This role is focused on delivering secure, scalable, cloud-first communication solutions using RingCentral, NiCE CXone, and Cyara.
You will work closely with Contact Center Operations, Agile delivery teams, and technology partners to continuously improve customer and associate experiences across the enterprise.
Responsibilities include but not limited to:
Design, engineer, implement, and support enterprise UCaaS and CCaaS platforms
Provide daily operational support for cloud-based telephony, unified communications, SIP services, and IVR solutions
Qualifications:
Hands-on experience engineering and supporting cloud-based telephony or contact center platforms
Strong understanding of VoIP technologies, SIP, and call routing concepts
RingCentral and RingCentral Contact Center engineering
NiCE inContact / CXone administration and development
Cyara or similar modern telephony orchestration platforms
Experience designing and supporting UCaaS and CCaaS (including IVRs and contact center workflows) solutions in large enterprise environments
Solid knowledge of networking concepts related to real-time communications
Preferred Qualifications:
Supporting remote contact center agents
REST API integrations and automation
Scripting using PowerShell or Python
Workforce management, call recording, or speech technologies
PSTN carrier and phone number lifecycle management
This role plays a critical part in modernizing Securian's communication platforms and ensuring reliable, scalable experiences for customers and associates. You will have the opportunity to influence technical direction and deliver compelling solutions that matter.
#LI-Hybrid**This position willhave a hybrid working arrangement.**
Securian Financial believes in hybrid work as an integral part of our culture. Associates get the benefit of working both virtually and in our offices. Ifyou'reina commutable distance (90 minutes)you'lljoin us 3 days each week in our offices to collaborate and build relationships. Our policy allows flexibility for the reality of business and personal schedules.
The estimated base pay range for this job is:
$72,000.00 - $134,000.00Pay may vary depending on job-related factors and individual experience, skills, knowledge, etc. More information on base pay and incentive pay (if applicable) can be discussed with a member of the Securian Financial Talent Acquisition team.
Be you. With us. At Securian Financial, we understand that attracting top talent means offering more than just a job - it means providing a rewarding and fulfilling career. As a valued member of our high-performing team, we want you to connect with your work, your relationships and your community. Enjoy our comprehensive range of benefits designed to enhance your professional growth, well-being and work-life balance, including the advantages listed here:
Paid time off:
We want you to take time off for what matters most to you. Our PTO program provides flexibility for associates to take meaningful time away from work to relax, recharge and spend time doing what's important to them. And Securian Financial rewards associates for their service by providing additional PTO the longer you stay at Securian.
Leave programs: Securian's flexible leave programs allow time off from work for parental leave, caregiver leave for family members, bereavement and military leave.
Holidays: Securian provides nine company paid holidays.
Company-funded pension plan and a 401(k) retirement plan: Share in the success of our company. Securian's 401(k) company contribution is tied to our performance up to 10 percent of eligible earnings, with a target of 5 percent. The amount is based on company results compared to goals related to earnings, sales and service.
Health insurance: From the first day of employment, associates and their eligible family members - including spouses, domestic partners and children - are eligible for medical, dental and vision coverage.
Volunteer time: We know the importance of community. Through company-sponsored events, volunteer paid time off, a dollar-for-dollar matching gift program and more, we encourage you to support organizations important to you.
Associate Resource Groups: Build connections, be yourself and develop meaningful relationships at work through associate-led ARGs. Dedicated groups focus on a variety of interests and affinities, including:
Mental Wellness and Disability
Pride at Securian Financial
Securian Young Professionals Network
Securian Multicultural Network
Securian Women and Allies Network
Servicemember Associate Resource Group
For more information regarding Securian's benefits, please review our Benefits page.
This information is not intended to explain all the provisions of coverage available under these plans. In all cases, the plan document dictates coverage and provisions.
Securian Financial Group, Inc. does not discriminate based on race, color, religion, national origin, sex, gender, gender identity, sexual orientation, age, marital or familial status, pregnancy, disability, genetic information, political affiliation, veteran status, status in regard to public assistance or any other protected status. If you are a job seeker with a disability and require an accommodation to apply for one of our jobs, please contact us by email at , by telephone (voice), or 711 (Relay/TTY).
To view our privacy statement click here
To view our legal statement click here
Remote working/work at home options are available for this role.
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Supports the Test Engineer in the development and commission of test solutions executing the test qualification of the fixture and program as per the specific system qualification process.
· Responsibility for providing the deliverables to support the solution in production to both the Test Support Function and Manufacturing Operations.
· Assists in the build and manufacture of testers, fixtures and environmental tooling as required to meet the customer expectations.
· The Technician Engineer provides the interface to the Test Support function providing comprehensive documentation and training for all test solutions implemented.
· Provides the interface to the Manufacturing function providing comprehensive documentation and coordinating training and education for all test operations implemented.
· Through working with the Test Support function monitor and contribute to the improvement of Test Yields, Efficiency, Intermittencies and Uptime providing accurate reporting and clear targets for improvement.
· In conjunction with the Test Engineer strives to consistently upgrade the test process balancing cost, coverage with the goal of providing an optimized and cost efficient test process.
· Works closely with manufacturing and test support to ensure prioritization of support activities. He/ She will be responsible for coordinating the timetable for test readiness based on the weekly production schedule through the appropriate Test Support staff.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.
This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.
What will you do?
- Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.
- Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.
- Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.
- Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.
- Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.
- Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.
- Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).
- Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.
- Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.
- Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.
- Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.
- Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.
- Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.
- Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.
- Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.
MINIMUM QUALIFICATIONS
Education:
- Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.
Experience:
- 8 years' experience in mechanical design and integration of mission-critical systems.
- Proven track record of successful system designs and implementations in a relevant industry
- Strong understanding of mechanical systems, integration strategy, and system coordination
- Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.
- Excellent problem-solving skills and attention to detail
- Strong communication and teamwork abilities
PREFERRED QUALIFICATIONS
- Master’s Degree in Mechanical Engineering
- Professional Engineer (PE) License
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 30% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.
This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.
What will you do?
- Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.
- Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.
- Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.
- Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.
- Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.
- Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.
- Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).
- Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.
- Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.
- Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.
- Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.
- Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.
- Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.
- Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.
- Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.
MINIMUM QUALIFICATIONS
Education:
- Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.
Experience:
- 8 years' experience in mechanical design and integration of mission-critical systems.
- Proven track record of successful system designs and implementations in a relevant industry
- Strong understanding of mechanical systems, integration strategy, and system coordination
- Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.
- Excellent problem-solving skills and attention to detail
- Strong communication and teamwork abilities
PREFERRED QUALIFICATIONS
- Master’s Degree in Mechanical Engineering
- Professional Engineer (PE) License
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.
This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.
What will you do?
- Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.
- Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.
- Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.
- Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.
- Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.
- Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.
- Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).
- Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.
- Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.
- Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.
- Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.
- Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.
- Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.
- Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.
- Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.
MINIMUM QUALIFICATIONS
Education:
- Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.
Experience:
- 8 years' experience in mechanical design and integration of mission-critical systems.
- Proven track record of successful system designs and implementations in a relevant industry
- Strong understanding of mechanical systems, integration strategy, and system coordination
- Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.
- Excellent problem-solving skills and attention to detail
- Strong communication and teamwork abilities
PREFERRED QUALIFICATIONS
- Master’s Degree in Mechanical Engineering
- Professional Engineer (PE) License
Remote working/work at home options are available for this role.
Mechanical Design Engineering
Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.
This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.
Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.
Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.
Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.
Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.
Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.
Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.
Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).
Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.
Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.
Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.
Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.
Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.
Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.
Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.
Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.
Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.
8 years' experience in mechanical design and integration of mission-critical systems.
~ Proven track record of successful system designs and implementations in a relevant industry
~ Strong understanding of mechanical systems, integration strategy, and system coordination
~ Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.
~ Master’s Degree in Mechanical Engineering
~
Remote working/work at home options are available for this role.
*Securian Financial the internal position title is Engineering Sr Analyst or Engineering Consultant. Title and salary will be determined based on applied skills.*
Position Summary:
Join theEnterprise Partner Solutions (EPS)team as aLicensing and Compensation Engineer, where you'll drive innovation in partner experience using cutting-edge SAP technologies. This team envisions a future where every financial producer is empowered from day one through intuitive, reliable, and scalable technology. Our engineering team is committed to transforming the producer experience by delivering back-end systems that simplify onboarding, ensure compliance in licensing, and guarantee timely and accurate compensation. We strive to be the trusted backbone of producer operations, enabling our company to grow with confidence and integrity. If you're passionate about engineering solutions that make a measurable impact, this is your opportunity to shape the future of partner engagement at scale.
Responsibilities include but not limited to:
Support and maintain SAP technologies related to partner compensation and licensing, including APM (ICM), ALM, OK2, and Advanced Workflow.
Perform analysis, design, development, and integration on medium to high level complexity assignments.
Develop and support automation capabilities through webservices and APIs.
Troubleshoot and resolve incidents across the licensing and compensation platform, including integrations with internal and external systems.
Collaborate with product analysts, quality engineers, and business stakeholders to deliver enhancements and ensure platform stability.
Analyze job failures, support tickets, and backlog stories to identify trends and drive continuous improvement.
Participate in Agile ceremonies and contribute to sprint planning, story refinement, and retrospectives.
Document technical processes and contribute to knowledge sharing across the EPS team.
Qualifications:
Bachelor's degree in Computer Science, Information Systems, or related field, or equivalent experience.
3+ years of experience supporting SAP technologies, preferably in compensation or licensing domains.
Familiarity with SAP ICM/APM and ALM modules.
Strong problem-solving skills and ability to manage multiple priorities.
Excellent communication skills and ability to work cross-functionally.
Experience with Agile methodologies and DevOps practices is a plus.
Preferred Qualifications:
SAP Certification in relevant Modules
Development Languages: Java, Groovy, SQL, Git, IntelliJ, webservices
Understanding of compensation payment structures for agents and familiarity with licensing and regulatory compliance frameworks governing producer eligibility to sell products.
Ability to work independently and as part of a collaborative team.
Commitment to continuous learning and process improvement.
#LI-hybrid **This position will be in a hybrid working arrangement.**
Securian Financial believes in hybrid work as an integral part of our culture. Associates get the benefit of working both virtually and in our offices. If you're in a commutable distance (90 minutes) you'll join us 3 days each week in our offices to collaborate and build relationships. Our policy allows flexibility for the reality of business and personal schedules.
The estimated base pay range for this job is:
$72,000.00 - $134,000.00Pay may vary depending on job-related factors and individual experience, skills, knowledge, etc. More information on base pay and incentive pay (if applicable) can be discussed with a member of the Securian Financial Talent Acquisition team.
Be you. With us. At Securian Financial, we understand that attracting top talent means offering more than just a job - it means providing a rewarding and fulfilling career. As a valued member of our high-performing team, we want you to connect with your work, your relationships and your community. Enjoy our comprehensive range of benefits designed to enhance your professional growth, well-being and work-life balance, including the advantages listed here:
Paid time off:
We want you to take time off for what matters most to you. Our PTO program provides flexibility for associates to take meaningful time away from work to relax, recharge and spend time doing what's important to them. And Securian Financial rewards associates for their service by providing additional PTO the longer you stay at Securian.
Leave programs: Securian's flexible leave programs allow time off from work for parental leave, caregiver leave for family members, bereavement and military leave.
Holidays: Securian provides nine company paid holidays.
Company-funded pension plan and a 401(k) retirement plan: Share in the success of our company. Securian's 401(k) company contribution is tied to our performance up to 10 percent of eligible earnings, with a target of 5 percent. The amount is based on company results compared to goals related to earnings, sales and service.
Health insurance: From the first day of employment, associates and their eligible family members - including spouses, domestic partners and children - are eligible for medical, dental and vision coverage.
Volunteer time: We know the importance of community. Through company-sponsored events, volunteer paid time off, a dollar-for-dollar matching gift program and more, we encourage you to support organizations important to you.
Associate Resource Groups: Build connections, be yourself and develop meaningful relationships at work through associate-led ARGs. Dedicated groups focus on a variety of interests and affinities, including:
Mental Wellness and Disability
Pride at Securian Financial
Securian Young Professionals Network
Securian Multicultural Network
Securian Women and Allies Network
Servicemember Associate Resource Group
For more information regarding Securian's benefits, please review our Benefits page.
This information is not intended to explain all the provisions of coverage available under these plans. In all cases, the plan document dictates coverage and provisions.
Securian Financial Group, Inc. does not discriminate based on race, color, religion, national origin, sex, gender, gender identity, sexual orientation, age, marital or familial status, pregnancy, disability, genetic information, political affiliation, veteran status, status in regard to public assistance or any other protected status. If you are a job seeker with a disability and require an accommodation to apply for one of our jobs, please contact us by email at , by telephone (voice), or 711 (Relay/TTY).
To view our privacy statement click here
To view our legal statement click here
Remote working/work at home options are available for this role.
How will you make an impact?
We are looking for a Principal Thermal Rack Engineer within the Intelligent Infrastructure Segment to drive advanced cooling solutions for high-performance computing systems. This role involves incorporating thermal components such as direct liquid cooling (DLC) systems, coolant distribution units (CDUs), and manifolds into network and server racks (EIA 19” and ORv3). You will leverage CFD tools to perform rack and system-level thermal and fluid analysis, ensuring optimal flow distribution, pressure drop, and temperature performance. Additionally, you will create 3D CAD designs for seamless hardware integration, lead validation testing, and resolve thermal or flow issues through root cause analysis and corrective actions. Collaboration with cross-functional teams, customers, and global vendors is essential to align thermal architectures with overall system design and international standards.
What will you do?
- Lead the end-to-end integration and testing of rack thermal solutions, including liquid cooling systems in varying form factors and product lines.
- Use CFD tools (FloTherm or Macroflow) to perform switch, rack, and system-level thermal/fluid analysis (flow distribution, pressure drop, and temperature profiling).
- Design and optimize thermal components using 3D CAD (Creo or SolidWorks) to support seamless hardware integration and testing.
- Participate in customer engagements and site visits to understand and document deployment constraints and gather feedback for design improvements.
- Partner with factory teams to ensure racks are built with proper airflow, hose routing, and thermal safeguards, while establishing best practices that improve build consistency across deployments.
- Collaborate with Architects/Compliance/Reliability and global vendors to align thermal architectures with total system design and international data center/thermal/mechanical standards (e.g., UL, OCP, ASHRAE, ISTA, ASTM, NEBS).
- Conduct thermal, mechanical, and reliability testing, analyzing airflow, coolant flow rates, pressure drops, and structural integrity to ensure compliance with the end-users’ specifications.
- Develop and maintain design documentation including BOMs, wetted materials compliance, test plans, and engineering change orders (ECOs).
- Manage relationships with mechanical/thermal component vendors to build out a robust partner ecosystem consisting of racks, CDUs, hoses, manifolds, QDs, and cold plates.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (e.g., in-row cooling, in-rack cooling, rear door heat exchangers).
- Conduct root cause analysis and corrective actions for mechanical and thermal failures or field issues.
- May perform other duties and responsibilities as assigned.
How will you get here?
Education:
- Bachelor’s Degree in Mechanical/Thermal Engineering, Systems Engineering, or related field is required
Experience:
- Minimum of 7+ years of experience in thermal/mechanical systems integration
- 3+ years of specific experience in rack-scale thermal design and analysis
- Strong understanding of mechanical systems, integration strategies, and large-scale program management
- Familiarity with server design, heatsinks, cold plates, hoses, and blind-mate connectors
- Proficiency in CFD simulation (e.g. ANSYS, 6Sigma, etc.) and 3D modeling software (e.g. SolidWorks, Creo)
- Hands-on experience with thermal chambers, fans, and coolant
- Excellent English communication skills (verbal and written) with strong technical leadership capabilities
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Capable of assessing projects, articulating risks, and developing project milestones
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management and customers
- Capable of influencing others and sharing best practices
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering, Systems Engineering or related field is preferred
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license preferred.
- Hands-on experience with prototype fabrication and testing; experience working with global suppliers and contract manufacturers a plus.
About Jabil’s Intelligent Infrastructure Group:
- Headquartered in Austin, TX, with a flagship facility located near The Domain and the Austin FC stadium
- Growing rapidly, with a team of more than 100 employees in Austin (500+ worldwide) and significant expansion planned through 2026
- Generated over $12 billion in FY25 revenue, driven largely by partnerships with major hyperscale customers
- Delivers cutting‑edge engineering, supply chain, and manufacturing solutions that power the world's AI infrastructure and global data center ecosystems
As part of the total rewards package, this position is eligible for:
- Annual bonus opportunity
- Medical, dental, and vision insurance plans
- Paid time off (PTO)
- 4 weeks of paid parental leave
- 11 company-paid holidays (9 fixed holidays and 2 optional floating holidays), subject to change yearly
- 401(k) retirement plan
- Employee stock purchase plan
Remote working/work at home options are available for this role.
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries about this opportunity, please contact one of our Talent Specialists, Hema, at (63 or Sri Balan at (63 Title: Senior Engineer, Global Services
- Hybrid Location: Medina, NY Duration: 12 Months Hours: 9 AM
- 5 PM Flexible on availability to be on-site, with someone who can work 1-2 days per week, Open to relocation and considering senior candidates.
must have the ability to travel Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered.
Description: Summary: Applies a solid understanding of engineering and problem-solving theories/practices toward the development of new or enhanced products or processes.
Creates service deliverables and infrastructure required to support initial product launch and lifecycle management.
Capable of designing machine tooling, jigs, fixtures, gauges and equipment used in the servicing process.
Capable of checking designs and drawings against general standards, design requirements, geometric tolerances, drafting practices and the manufacturing process involved.
The work of the individual should be highly creative, of high quality and offer wide latitude for independent judgment and perception with a minimal amount of supervision.
Need not have any tools/ software experience, CAD would be a plus.
Medical background will be a plus any regulatory background will be good.
Someone who was worked with Engineers, multitasking will be a great fit.
Ambiguity, adapt, multi-task and works with lead engineer in projects.
Support the team of Product core and represent service operations and supply chain.
Will be in charge of Service change implementation.
Focuses on design changes, process changes.
Collaborates with Service Process, Engineers, Technicians, impact of changes.
Oversees Document Revision, Handle Change control, mentored and directed by team to tackle multiple product and project Essential Duties and Responsibilities: 1.
Creates new product development and lifecycle management service deliverables throughout the product lifecycle for medical device products involving hardware.
2.
Supports new product platform releases.
Develops and implements service training, test equipment, tools, spare parts, and service manuals / instructions.
3.
Evaluates / makes recommendations on product releases related to design for serviceability.
Creates (or modifies existing) servicing processes and manuals to support repair or refurbishment of fielded product at multiple global sites or in the field.
4.
Works closely with design team to select, develop, and implement technologies across all medical device development programs.
5.
Analyzes key servicing metrics to identify and implement opportunities for improvement in service process quality, cost, or product reliability.
6.
Coordinates information flow between corporate and local/regional teams.
7.
Owns Corrective and Preventive Actions related to the product(s) core team(s) supported, using sound root cause analysis.
8.
May represent Technical Services on new product development and/or lifecycle management core teams.
9.
May independently plan, schedule and lead cross-functional teams in detailed phases of the engineering work in a project.
10.
May approve the work of lower level engineers; may supervise other engineers or technicians Minimum Qualifications: 1.
Must be well versed in core engineering disciplines (e.g.
mechanical, electrical, software, systems engineering).
2.
Highly motivated self-starter who is able to work with minimal supervision.
3.
Must have good interpersonal and oral/written communication skills, good time management, and be capable of analyzing and solving technical problems through innovative thought and application of sound engineering principles and root cause analysis.
4.
Experience with change control methodologies and configuration management principles is a plus.
5.
Experience with test engineering and/or reliability engineering principles is a plus.
6.
Ability to exercise independent judgment and draw conclusions based on available information.
7.
Good understanding of GMP and quality system requirements.
Education and/or Experience: Bachelor's degree in a core engineering discipline (mechanical, electrical, software, systems, or mfg/process engineering) plus 3-5 years of experience.
Medical device experience or other regulated industry experience preferred.
Experience in the use of Lean Six Sigma tools highly desirable.
About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
GMP, Medical Device, Lean Six Sigma
Remote working/work at home options are available for this role.
