Engineering Structures Jobs in Roselle, IL

Title: Senior Engineer,MEMS Characterization

Department: MEMS Engineering

Location: Itasca, Illinois

SUMMARY DESCRIPTION:

MEMS Characterization Senior Engineer will work with design, process, and failure analysis engineer on assisting characterization and failure analysis of the MEMS device, while supporting technology development, product qualifications and quality monitoring. Employee will maintain and develop new test solutions, recommend hardware requirements based on existing trends in characterization.

Responsibilities

• Developing and maintain MEMS test solutions for production failure analysis, collaborating with design and process engineering to further characterization efforts and drive yield improvement
• Ensuring hardware and software installations are maintained.
• Continuous improvement of characterization capabilities collaborating with MEMS development team
• Perform microphone, MEMS, assembly failure analysis
• Work with design and process engineer to define characterization requirements and support execution of the characterization, including submitting work order requests and writing characterization reports.

Qualifications

• Master of Science/Engineering in Electrical/Mechanical/Material/Physics (or related field) with 2-5 years’ experience. PhD is a plus
• Experience in troubleshooting, debugging and with failure analysis of MEMS sensors is desired
• Familiar with material/device characterization using optical, electrical, mechanical methods
• Basic knowledge of acoustics and mechanics is an asset.
• Must be a team player with good communication skill.
• Familiar with material/device characterization using optical, electrical, mechanical methods
• Knowledge of calibration methodologies and best practices
• Basic knowledge of statistical analysis (JMP, MiniTab, R) is an asset
• Reliability testing experience is an asset
• Experience with electrical test equipment such as parameter analyzer, oscilloscope, probe station, and data acquisition system are desired
• Experience with advanced surface science methodologies (SEM, Raman, Auger, FIB, FTIR) an asset
• Hands on experience on developing environmental testing setup and fixtures for sensors under thermal, vibration, and electrical tests is a plus
• Solid foundation in MEMS microphone acoustics theory, including capacitive transduction principles (Experience analyzing thin-film residual stress, mechanical-electrical sensitivity optimization, damping resistance (Skvor's formula), and high-frequency response/SNR enhancement mechanisms) is a plus
• Proficient in finite element analysis (FEA) tools such as COMSOL Multiphysics or ANSYS for 3D MEMS microphone simulations is a plus
• Understand the principle of dynamic system modeling and proficient in Matlab Simulink and LTSpice is a plus

COMPANY DESCRIPTION:

Knowles is a market leader and global provider of advanced micro-acoustic microphones and balanced armature speakers, audio solutions, and high performance capacitors and radio frequency ("RF") filtering products, serving the MedTech, defense, consumer electronics, electric vehicle, industrial, and communications markets. Our focus on the customer, combined with unique technology, proprietary manufacturing techniques, and global operational expertise, enables us to deliver innovative solutions across multiple applications. Knowles, founded in 1946 and headquartered in Itasca, Illinois, has approximately 7,000 employees at facilities located in 13 countries around the world. At Knowles, we are committed to engineering a better tomorrow through the actions we take on a daily basis. We believe that our focus on ethical, socially responsible, and environmentally sustainable behavior guides our decision-making processes and helps keep us accountable. Visit us at

EEO-M/F/D/V

Company Description

ITW Electronic Component Solutions is a global leader, comprised of distinguished brands specializing in unique product technologies for various industries. These industry-leading brands provide innovative solutions to key markets, reinforcing ITW as a trusted name in electronic component solutions worldwide. The ITW ECS group includes ITW Formex, ITW Linx, and ITW Lumex, all of which contribute to the development of cutting-edge technologies across global markets.

The Buyer/Planner is responsible for planning and scheduling production activities while managing the procurement of raw materials, components, and services required for the ITW ECS business units. This role ensures that production schedules, material availability, and supplier performance align to meet customer demand, maintain optimal inventory levels, and support overall operational efficiency. This is a full-time, onsite position in Bartlett, IL. Only local candidates will be considered.

Key Responsibilities

Production Planning & Scheduling

• Develop, maintain, and adjust production schedules based on customer demand, forecasts, and capacity constraints
• Coordinate daily production planning activities with operations, ensuring labor, equipment, and materials are properly allocated
• Monitor work‑in‑process and finished goods levels to ensure on‑time order completion
• Communicate schedule changes or risks to operations, customer service, and leadership

Material Planning & Inventory Management

• Maintain accurate material requirements planning (MRP) within the ERP system
• Ensure adequate inventory levels are maintained to meet production schedules while minimizing excess or obsolete stock
• Conduct root‑cause analysis on shortages, delays, or inventory inaccuracies and implement corrective actions
• Track safety stock levels and update planning parameters as needed

Purchasing & Supplier Management

• Source, select, and purchase raw materials, components, and indirect supplies in alignment with production needs
• Manage supplier relationships and monitor vendor performance.
• Track and publish critical supply chain metrics, including customer and supplier on-time delivery.
• Follow up on open purchase orders, expedite materials when needed, and resolve delivery or quality issues
• Maintain accurate vendor records and purchasing data in the ERP system

Capacity & Resource Planning

• Analyze production capacity, equipment constraints, and labor availability to ensure feasible schedules
• Recommend adjustments to staffing levels, shift schedules, or outsourcing when required to meet demand
• Partner with engineering on new products, engineering changes, and phase-outs

Cross-Functional Collaboration

• Coordinate with procurement, operations, engineering, customer service, and quality to maintain smooth production flow
• Communicate proactively regarding material constraints, schedule risks, and priority changes
• Support S&OP processes by providing data on capacity, demand, inventory, and supplier performance

Continuous Improvement

• Implement Lean, Six Sigma, or other process improvement initiatives to enhance material flow and scheduling accuracy
• Improve planning tools, part parameters, and forecasting methods
• Participate in cost-reduction efforts through sourcing, inventory optimization, and process efficiencies

Minimum Required Skills and Education

• High School Diploma required
• 3 years of experience in production planning, materials management, or purchasing in a manufacturing environment
• Prior experience with ERP/MRP systems
• Strong analytical and organizational skills
• Proficiency with Excel and planning tools
• Knowledge of manufacturing processes, capacity planning, and inventory control principles
• Ability to speak, read, and write in English

Preferred Skills and Education

• Associate’s or Bachelor’s degree in Supply Chain, Operations, Business or related field
• Experience with Epicor ERP preferred

Work Conditions

• Primarily office environment, but may require periodic walking throughout the facility to coordinate with production, shipping, and warehouse teams

This is a full-time, onsite position in Bartlett, IL. Only candidates local to the Chicago area will be considered.

Compensation range: $30-$32 per hour

Why ITW ECS?

Here’s what we offer to help you build the future you want:

• Generous Retirement Benefits – 401(k) match PLUS an additional retirement contribution to help you plan for the future.
• Paid Time Off – Paid holidays, sick days, and vacation time to take time for what matters.
• Company-Paid Insurance – Life, AD&D, Short-Term & Long-Term Disability insurance to give you peace of mind.
• Family-Friendly Benefits – 4 weeks of paid parental leave and adoption reimbursement to support your family journey.
• Education Assistance – tuition reimbursement because we believe in investing in your personal and professional development.

ITW is an equal opportunity employer. We value our colleagues’ unique perspectives, experiences and ideas and create workplaces where everyone can develop their careers and perform to their full potential. 

As an equal employment opportunity employer, ITW is committed to equal employment opportunity and fair treatment for employees, beginning with the hiring process and continuing through all aspects of the employment relationship. 

All qualified applicants will receive consideration for employment without regard to race, color, sex, gender identity, sexual orientation, religion, national origin, age, disability, protected Veteran status or any other characteristic protected by applicable federal, state, or local laws.

Terms of Employment

• W2 Contract-to-Hire, 12 Months
• This role operates on a hybrid schedule, requiring three days in-office (Tuesday, Wednesday, and Thursday) and two days remote (Monday and Friday)
• Core working hours between 09:00 and 15:00

Overview

Our client is seeking a Senior Project Manager to manage engineering, construction, outage coordination, testing, and commissioning activities for transmission and substation projects. The successful candidate will oversee Transmission level Protection and Control replacement projects and/or Transmission line projects, ensuring seamless execution through a deep understanding of equipment function and construction sequencing.

Responsibilities

• Manage the full lifecycle of transmission and substation projects, including engineering, construction, and commissioning.
• Coordinate complex outages and system operations to ensure project milestones are met without compromising grid stability.
• Interpret one-line diagrams and technical specifications to understand equipment interfaces and functions.
• Anticipate and mitigate risks related to outages and commissioning sequences.
• Collaborate and communicate effectively with internal teams, including engineering, construction, and system operations.
• Oversee physical construction projects, ensuring adherence to safety and technical standards.

Required Skills & Experience

• STEM degree or a technical degree; however, significant professional experience may complement an arts degree.
• 7+ years of relevant experience.
• Proven utility project management experience, specifically within substation or transmission environments.
• Core technical understanding of Transmission & Substation (T&S) equipment.
• Extensive knowledge of construction and commissioning sequences.
• Hands-on experience managing physical construction projects.
• Strong communication skills for effective team and stakeholder coordination.

Preferred Skills & Experience

• PMP is highly preferred
• Experience specifically with Transmission level Protection and Control replacement.
• High-level awareness of outage and system operations within a utility framework.
• Ability to work effectively within a large team environment

Responsible for maintaining production and quality by ensuring proper operation of machinery and mechanical equipment.

**Shift - 1st - 630am-4pm**

Duties and Responsibilities

• Perform preventive maintenance on engines, motors, pneumatic tools, conveyor systems, and production machinery, following diagrams, manuals, manufacturer instructions, and engineering specifications.
• Troubleshoot mechanical malfunctions by observing equipment, listening for issues, and using precision measuring/testing instruments.
• Remove and replace defective parts using hoists, cranes, hand tools, and power tools.
• Inspect parts for dimensional changes using rules, calipers, micrometers, and other measuring tools.
• Adjust functional parts and control instruments using hand tools, levels, plumb bobs, and straightedges.
• Communicate preventive maintenance techniques to production staff to reduce downtime.
• Fabricate repair parts using machine shop instruments and equipment.
• Manage equipment, parts, and supply inventories; anticipate needs and place orders as required.
• Maintain maintenance resource efficiency by using equipment and supplies appropriately.
• Provide maintenance information, answer inquiries, and prepare mechanical maintenance reports.
• Keep technical knowledge current by attending workshops, reviewing publications, and networking.
• Document and communicate work actions, irregularities, and ongoing needs to maintain continuity among teams.
• Ensure a safe and clean working environment by following all procedures, rules, and regulations.

Skills & Qualifications

• Equipment maintenance and technical understanding
• Technical curiosity and problem-solving
• Ability to work under uncertainty
• Basic safety knowledge
• Power tool proficiency
• Attention to detail
• Flexibility and adaptability
• Supervisory and teamwork skills
• Strong job knowledge and productivity

Working Conditions

• Frequent standing, walking, lifting, bending, reaching, stooping, and other physical activity.
• Work conditions vary; flexibility is critical based on production needs.
• Temperature exposure: 30–110°F.
• Exposure to machinery, electrical, mechanical, and chemical hazards; high noise levels; damp or slippery floors.
• Must be able to lift up to 50 lbs. and stand for long periods.

Education & Experience

• High School Diploma or equivalent.
• Minimum 3 years of related experience and/or training, or equivalent combination of education and experience.

ABOUT ACCURATE PERSONNEL

Do you need your next job fast? Accurate Personnel is here to help! As an industry-leading full-service staffing agency, we have all the tools you need to start earning that next paycheck soon. Send us your application and our team will instantly get to work on finding you the right placement to fit your needs. Accurate Personnel has been a provider of temporary job services and direct hire search for 45 years. Our expertise has allowed us to grow from a regional Chicagoland office into a nationwide search firm that services over 500 clients while never losing sight of personalized service. Let Accurate work for you. Apply with us today!

—--

Accurate Personnel provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, sex, nat. origin, disability status, genetics, protected vetstatus, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws

About the Company

MultiTech, founded in 1993 and headquartered in Carol Stream, IL, is a top provider of highly engineered metal components and assemblies. MultiTech serves the Automotive, Industrial, Hydraulics and Power Transmission & Distribution market industries, with sales of $180 million. MultiTech operates seven manufacturing facilities and six distribution sites in the US, Mexico, and Asia. Our mission is to build a leading global metal manufacturing and assembly organization combining technology with superior quality manufacturing capabilities executed by our best asset - our employees. The ideal candidate will build on their experience and skills while growing with the company through career advancement opportunities.

About the Role

The Production Control Coordinator is responsible for planning, scheduling, and coordinating production activities to ensure efficient workflow, on-time delivery, and accurate ERP system data. Works closely with Operations, Purchasing, and Shipping to support daily manufacturing needs.

Responsibilities

• ERP Management (Epicor):
• Maintain and update production schedules within Epicor.
• Create and release work orders/jobs and ensure all required data is accurate.
• Monitor job statuses and perform job closings in a timely manner.
• Maintain accurate BOM/routing changes when identified thru Engineering.

Production Scheduling:

• Schedule primary machines and key resources to optimize throughput and minimize downtime.
• Adjust schedules based on priority changes, machine availability, material constraints, and customer needs.
• Communicate daily schedule priorities with Production Supervisors.

Material Coordination:

• Release raw material to jobs and ensure correct inventory transactions.
• Prevent shortages and ensure timely material availability.

Workflow & Coordination:

• Track WIP levels and move jobs through departments as required.
• Support continuous improvement to reduce bottlenecks and improve lead times.
• Maintain strong communication with Manufacturing, Quality, and Shipping teams.
• Reporting & Accuracy:
• Analyze and resolve Epicor transaction errors, quantity discrepancies, and job variances.
• Generate daily/weekly production reports for management review.

Qualifications

• Experience with ERP systems; Epicor experience preferred.
• Strong understanding of manufacturing workflows and machine scheduling.
• Ability to interpret work orders, BOMs, and blueprints (a plus).
• Excellent organizational and communication skills.
• Detail-oriented with strong problem-solving abilities.

Job Metrics / Success Indicators:

• On-time delivery performance
• Schedule adherence and machine utilization
• Accuracy of inventory and job costing
• Reduction in late jobs and production bottlenecks

Equal Opportunity Statement

MultiTech Industries is an equal opportunity employer. All aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. We do not discriminate on the basis of race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law.

Position Summary:

The Applications Engineer is responsible for providing technical expertise, process development, and customer support related to industrial machinery. This role bridges engineering, sales, and service by demonstrating machine capabilities, optimizing cutting parameters, and ensuring customers achieve maximum value from their laser systems.

Primary Responsibilities:

• Develop and optimize laser cutting parameters for various metals and material thickness.
• Conduct machine demonstrations, trials, and proof of concept test for prospective customers.
• Troubleshoot cutting quality and process issues.
• Provide on-site and remote training to customers on machine operation, maintenance, and process optimization.
• Develop and document cutting process databases, application notes, and best practice guides.

Secondary Responsibilities:

• Support installation and commissioning at customer sites as needed
• Prepare technical documentation, cutting samples, and reports for customer presentations
• Support trade shows, open houses, and industry events with live demonstration and technical expertise
• Assist in product development by relating customer and application insights to R&D

Position Requirements:

• Bachelor’s degree in mechanical or manufacturing engineering, Materials Science, or a related technical field (Equivalent experience may be considered)
• 5+ Years of experience in laser processing, CNC machinery, or precision metal fabrication
• Hands-on experience with fiber laser products highly preferred
• Knowledge of motion controls systems, optics, and materials sciences is a plus
• Familiarity with CAD/CAM software
• Travel requirement is 25%

HSG is committed to ensuring equal employment opportunities to all qualified persons without regard to race (including associated hairstyles), color, religion, sex, gender identity, sexual orientation, national origin, ancestry, citizenship status, age, marital status, genetic information, military status, unfavorable discharge from military service, order of protection status, pregnancy, arrest record, disability, or any other status protected by applicable law. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. HSG participates in E-Verify and conducts pre-employment drug testing and background checks as part of our hiring process.

HR Consultant

Location: Schaumburg, IL

We are looking for Independent HR Consultant who has expertise in below areas;

1. HR Policy & Employee Handbook

• Drafting and/or editing US-compliant Employee Handbooks
• Alignment with Federal laws (FLSA, FMLA, ADA, EEOC, OSHA, etc.)
• State-specific customization (Illinois and other operating states)
• Policies covering:
• Employment classifications
• Leave & time-off
• Code of conduct & disciplinary procedures
• Anti-harassment, whistle-blower, DEI
• Remote work & data privacy
• Ability to regularly update policies based on legal changes

2. Employee Benefits Advisory & Structuring

• Designing and advising on employee benefits programs, including:
• Health, dental, vision insurance
• Life & disability insurance
• Retirement plans (401k advisory exposure preferred)
• Working with brokers and insurance providers
• Cost optimization while ensuring compliance and competitiveness
• Benefits benchmarking and renewal negotiations support

3. Internal PEO / Co-Employment Model Setup

• Advisory support to create an internal PEO-like structure
• Clubbing payroll and benefits across multiple legal entities
• Guidance on:
• Co-employment risks
• EIN usage and payroll structuring
• Centralized benefits administration
• Ensuring compliance while enabling operational efficiency
• Experience transitioning from fragmented payroll to centralized models is critical

4. Payroll & Multi-Entity HR Structuring

• Advisory (not transactional payroll processing)
• Structuring payroll governance across entities
• Coordination with payroll vendors
• Compliance with federal, state, and local tax requirements

5. M&A HR Due Diligence

• HR due diligence support during Mergers & Acquisitions, including:
• Workforce risk assessment
• Compensation & benefits analysis
• Policy, contract, and compliance review
• Identification of post-merger HR risks and integration challenges
• Experience supporting PE-backed or growth-stage companies preferred

6. US Employment Law Advisory

• Federal employment laws
• State and local labor laws & Practical, business-oriented interpretation of laws
• Employee relations risks
• Termination, layoffs, and restructuring compliance
• Ability to guide HR and leadership, not replace employment attorneys

Franchise and Corporate Associate Attorney

This role is well suited for an attorney looking to and build a long-term career in franchise and corporate law in a sophisticated, collaborative practice The position offers meaningful autonomy, including responsibility for an existing client base, while also providing the opportunity to work closely with experienced franchise and corporate teams. The position is strictly transactional and regulatory in nature.

Franchise law experience is a plus but not required as long as the candidate is open to participating in a structured franchise law training program and has a genuine interest in developing a franchise law practice. Our corporate practice covers a broad range of general business matters such as entity formation and structuring, business acquisitions and sales, corporate governance, and complex commercial agreements.

Our Franchise Law Practice Group represents franchisors nationwide and Illinois franchisees. Franchisor work includes drafting franchise disclosure documents, handling state franchise registrations, preparing franchise agreements and related documents, advising clients on compliance matters, and supporting franchise relationships through renewals, transfers, defaults, terminations, and regulatory inquiries. Franchisee representation involves reviewing and negotiating disclosure documents and franchise agreements for prospective franchisees, commercial lease review and negotiation, advising existing franchisees on franchise relationship matters, and representing franchisees in acquisitions and sales.

The ideal candidate is highly motivated, detail-oriented, and comfortable handling client matters independently in collaboration with the team. Candidates must be admitted to practice in Illinois and have 2+ years prior experience in transactional business or corporate law with direct client interaction. Strong communication and drafting skills, excellent organization skills, and a consistent focus on quality and client service are essential.

This position offers a compelling opportunity to develop a specialized, in-demand skill set within a forward-thinking law firm, supported by a comprehensive benefits package and billable expectations designed to support a healthy work-life balance.

We are an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status

Please send current resume along with references and salary requirements to