Engineering Structures Jobs in Poolesville Montgomery County Md Remote
487 positions found — Page 5
Controls Project Manager II
✦ New 🏢 CPG
Salary not disclosed
Position:
Controls Project Manager II
Location:
19775 Belmont Executive Plaza
Suite 200
Ashburn, VA
Job Id:
937
# of Openings:
1
TITLE: CONTROLS PROJECT MANAGER II
LOCATION:
POSITION SUMMMARY:
The Controls Project Manager II is responsible for assisting an OTS Director in organizing our ongoing projects. This role involves monitoring project plans, schedules, work hours, budgets, and expenditures and ensuring that project deadlines are met on time. The Controls Project Manager II will assist with processes, procedures, management, and documentation needed for CPG's multiple data center infrastructure services.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
* Maintaining and monitoring project plans, project schedules, work hours, budgets, and expenditures.
* Documenting and following up on important actions and decisions from meetings.
* Preparing necessary presentation materials for meetings.
* Ensuring project deadlines are met.
* Determining project changes.
* Providing administrative support as needed.
* Undertaking project tasks as required.
* Developing project strategies.
* Ensuring projects adhere to frameworks and all documentation is maintained appropriately for each project.
* Assess project risks and issues and provide solutions where applicable.
* Chair and facilitate meetings where appropriate and distribute minutes to all project team members.
* Create a project management calendar for fulfilling each goal and objective.
* On-site project management as necessary, including but not limited to QA/QC checks on projects, deliverable inventory management, and safety protocol validation.
* MUST BE A US CITIZEN
Managerial Responsibilities
* Estimates
o Leads proposal efforts (Research / Cost Estimates / Proposal Documents) for medium to large projects
o Works with relevant stakeholders to review scope of project
o Conducts any surveys, inspections, tours, etc. of client sites, as required
o Prepares cost estimates and supporting documents for small projects
o Evaluation and pricing of change orders
* Divisional Management
o Actively follows emerging technical trends and contributes to Division leadership and guidance in area of practice
* Personnel Management
o Assigns technical tasks to engineers and administrative staff in support of projects
o Assigns technical tasks and coordinates with entry-level engineers
o Assigns tasks and coordinates with Technical Staff
QUALIFICATIONS:
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Education/Experience (Desired):
* Bachelor's degree in engineering preferred
* 5 - 10 years
* Associate degree (add 3 years)
* High school diploma (add 5 years)
* Experience in reading electrical, telecommunications and control schematics and plans
* Experience in overseeing control system startup, configuration, and calibration
* Experience in testing and troubleshooting control systems
Computer Skills:
* Competency in Microsoft Office applications, including Word, Excel, and Outlook.
* Experience in Project Management Software (Project)
* Experience in CAD/CAE Software (Visio, AutoCAD)
Certificates and Licenses (Preferred):
* PMP Certification
Supervisory Responsibilities:
* No supervisory responsibilities with this position.
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
* Exposure to computer screens for an extended period of time, Occasionally, lift and/or move 10 to 15 pounds. Frequently required to sit, stand, walk, stoop, kneel, crouch or crawl; occasionally required to climb or balance. Specific vision abilities required include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust and focus. Reach by extending hands or arms in any direction, finger dexterity, listen and understand information and ideas presented through spoken words and sentences. Communicate information and ideas in speaking so other will understand. Read and understand information and ideas presented in writing. Apply general rules to specific problems to produce answers that make sense.
*Salary Negotiable*
The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.
CPG Participates in E-Verify
Pay Range: $98,891 - $148,392 per year
Apply for this Position
Controls Project Manager II
Location:
19775 Belmont Executive Plaza
Suite 200
Ashburn, VA
Job Id:
937
# of Openings:
1
TITLE: CONTROLS PROJECT MANAGER II
LOCATION:
POSITION SUMMMARY:
The Controls Project Manager II is responsible for assisting an OTS Director in organizing our ongoing projects. This role involves monitoring project plans, schedules, work hours, budgets, and expenditures and ensuring that project deadlines are met on time. The Controls Project Manager II will assist with processes, procedures, management, and documentation needed for CPG's multiple data center infrastructure services.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
* Maintaining and monitoring project plans, project schedules, work hours, budgets, and expenditures.
* Documenting and following up on important actions and decisions from meetings.
* Preparing necessary presentation materials for meetings.
* Ensuring project deadlines are met.
* Determining project changes.
* Providing administrative support as needed.
* Undertaking project tasks as required.
* Developing project strategies.
* Ensuring projects adhere to frameworks and all documentation is maintained appropriately for each project.
* Assess project risks and issues and provide solutions where applicable.
* Chair and facilitate meetings where appropriate and distribute minutes to all project team members.
* Create a project management calendar for fulfilling each goal and objective.
* On-site project management as necessary, including but not limited to QA/QC checks on projects, deliverable inventory management, and safety protocol validation.
* MUST BE A US CITIZEN
Managerial Responsibilities
* Estimates
o Leads proposal efforts (Research / Cost Estimates / Proposal Documents) for medium to large projects
o Works with relevant stakeholders to review scope of project
o Conducts any surveys, inspections, tours, etc. of client sites, as required
o Prepares cost estimates and supporting documents for small projects
o Evaluation and pricing of change orders
* Divisional Management
o Actively follows emerging technical trends and contributes to Division leadership and guidance in area of practice
* Personnel Management
o Assigns technical tasks to engineers and administrative staff in support of projects
o Assigns technical tasks and coordinates with entry-level engineers
o Assigns tasks and coordinates with Technical Staff
QUALIFICATIONS:
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Education/Experience (Desired):
* Bachelor's degree in engineering preferred
* 5 - 10 years
* Associate degree (add 3 years)
* High school diploma (add 5 years)
* Experience in reading electrical, telecommunications and control schematics and plans
* Experience in overseeing control system startup, configuration, and calibration
* Experience in testing and troubleshooting control systems
Computer Skills:
* Competency in Microsoft Office applications, including Word, Excel, and Outlook.
* Experience in Project Management Software (Project)
* Experience in CAD/CAE Software (Visio, AutoCAD)
Certificates and Licenses (Preferred):
* PMP Certification
Supervisory Responsibilities:
* No supervisory responsibilities with this position.
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
* Exposure to computer screens for an extended period of time, Occasionally, lift and/or move 10 to 15 pounds. Frequently required to sit, stand, walk, stoop, kneel, crouch or crawl; occasionally required to climb or balance. Specific vision abilities required include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust and focus. Reach by extending hands or arms in any direction, finger dexterity, listen and understand information and ideas presented through spoken words and sentences. Communicate information and ideas in speaking so other will understand. Read and understand information and ideas presented in writing. Apply general rules to specific problems to produce answers that make sense.
*Salary Negotiable*
The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.
Benefits to Joining Our Team
CPG offers a competitive and comprehensive package that includes additional benefits beyond enhanced medical, dental, and vision coverage
- Health Benefits - (Medical, Dental & Vision Insurance)
- Flexible Spending Account Options
- 401K Plan
- Employer paid Life & Disability Insurance
- Paid Time Off
- Employee Referral Program
- Employee Assistance Program (EAP)
CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.
Learn more about CPG by checking out our website here
#LI-TG1
CPG Participates in E-Verify
Pay Range: $98,891 - $148,392 per year
Apply for this Position
Not Specified
Capture Manager, LV/Estimator
✦ New 🏢 CPG
Salary not disclosed
Position:
Capture Manager, LV/Estimator
Location:
19775 Belmont Executive Plaza
Suite 200
Ashburn, VA
Job Id:
835
# of Openings:
1
TITLE: Capture Manager, LV/Estimator
LOCATION: Ashburn, VA
POSITION SUMMARY: The LV Capture Manager / Estimator (Strong in LV Cabling & LV Infrastructure) supports CPG in determining the growth and implementation of all White Space Fit Out aspects of the company. This to include but not limited to the following: Assist in the development of the low voltage cost estimates and cost budgets for new projects across a portfolio of fast-paced construction projects as it pertains to the LV portions of the projects. You will be involved in the solutioning, pricing and proposal phases along with the actual implementation of the self-performed cabling aspect of our growth strategy. Knowledge in the understanding to the other aspects of WSFO is also required. Primarily, Basket Tray, ladder rack and fiber runner applications. Knowledge in how containment, caging, floor tile cuts, Power feeders/Power whips and BCMS/EPMS integrate into the entire build process.
ESSENTIAL DUTIES AND RESPONSIBILITIES: To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
QUALIFICATIONS:To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Education/Experience:
Computer Skills:
Certificates and Licenses:
Supervisory Responsibilities:
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.
We Utilize E Verify
#LI-TG1
Pay Range: $130,798 - $196,253 per year
Apply for this Position
Capture Manager, LV/Estimator
Location:
19775 Belmont Executive Plaza
Suite 200
Ashburn, VA
Job Id:
835
# of Openings:
1
TITLE: Capture Manager, LV/Estimator
LOCATION: Ashburn, VA
POSITION SUMMARY: The LV Capture Manager / Estimator (Strong in LV Cabling & LV Infrastructure) supports CPG in determining the growth and implementation of all White Space Fit Out aspects of the company. This to include but not limited to the following: Assist in the development of the low voltage cost estimates and cost budgets for new projects across a portfolio of fast-paced construction projects as it pertains to the LV portions of the projects. You will be involved in the solutioning, pricing and proposal phases along with the actual implementation of the self-performed cabling aspect of our growth strategy. Knowledge in the understanding to the other aspects of WSFO is also required. Primarily, Basket Tray, ladder rack and fiber runner applications. Knowledge in how containment, caging, floor tile cuts, Power feeders/Power whips and BCMS/EPMS integrate into the entire build process.
ESSENTIAL DUTIES AND RESPONSIBILITIES: To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
- Review and understand RFP/RFQ documents from customers and supports request for information (RFI) process as it pertains to the low voltage and related WSFO items of the projects.
- Identify project risks and/or challenges as part of solutioning process.
- Assist in generation of rough order of magnitude and/or formal estimates for potential projects pertaining to LV efforts or LV portions of larger efforts.
- Assist in proposal development of the deliverable.
- Maintain a well organize database of bid documents for reference upon award of contract to manage the kickoff process with the PreCon Manager.
- Identify additional revenue opportunities for CPG, as applicable.
- Coordinate with personnel from sales, engineering, preconstruction, execution, and finance teams.
- Collect different quotes from subcontractors, vendors, and suppliers pertaining to the task at hand.
- Review and assess cost estimates.
- Identify labor, material, costs, and time requirements by researching proposals, blueprints, and any related documents.
- Comfortable making site visits and documenting the data for distribution to the CPG team.
- 50% travel for local candidates within the NOVA area. 5% outside NOVA.
- Create shop drawings and other related documentation for potential change orders during project execution.
- Assist estimation and procurement teams to ensure correct material orders and project pricing.
- Perform site walks to assist the estimation team in properly pricing material and labor for new opportunities.
QUALIFICATIONS:To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Education/Experience:
- 5-10 years of LV installation/Estimation and on-site project management preferred.
- 2+ years of experience in construction estimating, with specific knowledge of mission critical systems
- 2+ years of data center experience relating to batteries, UPS replacements and general maintenance required in a mission critical environment is preferred
- Electrical estimating is a plus
- Ability to interpret contract terms, conditions, and exhibits as applicable to project requirements
- Strong interpersonal skills and the ability to work both independently and in a team environment
- Excellent organizational and problem-solving skills
- Demonstrated experience developing and justifying budgets
- Ability to create and maintain processes for project documentation
- Ability and willingness to think outside of the box to find creative and innovative solutions prior to and during the construction process to reduce costs with no impact on quality and reliability
- Possess excellent communication skills, attention to detail, and be able to maintain high-quality standards
- Proficient with Microsoft Office Suite. On Screen Take Off or Bluebeam, Building Connected or Accubid or RS Means preferred.
- Must be a US Citizen
- 10% travel
Computer Skills:
- Windows power user skill set, proficient with Microsoft Office Suite, and estimating software such as Accubid, RS Means, On Screen Take Off, Bluebeam, AutoCAD. Fluke/Viavi and other assorted Fiber testing equipment, Fluke LinkWare, Viavi J-Reporter and/or other Testing platform software's. Fujikura, Sumitomo and/or similar splicing tools and software's.
- Procore Software for vendor management.
Certificates and Licenses:
- None
Supervisory Responsibilities:
- No supervisory requirements for this role
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
- Prolonged periods of sitting at a desk or working on a computer. Must be able to lift up to 15-50 pounds at a time. May be required to walk around facility. Can safely work from a 12' ladder, as well as safely operate and work from a lift to greater heights. Need to be able to visually identify colors for copper and fiber link identification.
The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.
Benefits to Joining Our Team
CPG offers a competitive and comprehensive package that includes additional benefits beyond enhanced medical, dental, and vision coverage
- Health Benefits - (Medical, Dental & Vision Insurance)
- Flexible Spending Account Options
- 401K Plan
- Employer paid Life & Disability Insurance
- Paid Time Off
- Employee Referral Program
- Employee Assistance Program (EAP)
CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.
We Utilize E Verify
#LI-TG1
Pay Range: $130,798 - $196,253 per year
Apply for this Position
Not Specified
Assembler - Manufacturing
✦ New 🏢 Thorlabs
Salary not disclosed
Thorlabs is pleased to play a role in advancing science through the components, instruments, and systems we design and manufacture. We believe that science and innovation have great potential to improve the world around us and are committed to advancing photonics (i.e., light-based) technologies that positively impact our customers, employees, and communities. Via educational outreach and more sustainable business practices, we continuously invest in a brighter future. We recognize that each of our employees is a unique individual with the ability to contribute to our success and seek to find great people who will thrive in our fun, fast-paced culture.
Requirements
Purpose of the Position
As part of our LEAN Manufacturing business strategy, the position is located within a work \"cell\" assembling a variety of components ranging in complexity throughout the day. Works under general supervision. The location of the position is in Thorlabs' Sterling, VA facility
Essential Job Functions include the following, but are not limited to:
In addition to the essential functions and duties listed above, all positions are also responsible for:
The Company retains the right to change or assign other duties to this position.
Physical Activities:
Work may be active, could stand or sit for long durations and/or perform repetitious work at times. The employee may lift or move objects up to 20 pounds. Employees must grasp, manipulate, or assemble parts and components that are often very small. The noise level in the work environment is usually moderate, however, may be noisy at times. Must be able to wear appropriate clothing and personal protective equipment such as but not limited to masks, glasses, gloves, and specialty garments. The required PPE and training allow for the safe handling and processing of chemicals like adhesives, lubricants and solvents, and safe operation of job-related equipment and tools.
Qualifications
Experience:
Education:
Specialized Knowledge and Skills:
The estimated pay range for this role is $18.00/hour to $25.55/hour D.O.E.
Benefits
Thorlabs offers a complete benefits package that includes medical, dental and vision insurance, company paid life insurance, a generous PTO package, a 401(k) plan, and tuition reimbursement just to name a few..
Requirements
Purpose of the Position
As part of our LEAN Manufacturing business strategy, the position is located within a work \"cell\" assembling a variety of components ranging in complexity throughout the day. Works under general supervision. The location of the position is in Thorlabs' Sterling, VA facility
Essential Job Functions include the following, but are not limited to:
- Must be able to understand written work instructions and Drawings for a wide range of products to properly assemble the final product to the highest of quality standards and with zero scrap or rework.
- Assemble components and products of varying size and complexity which includes preparing, cleaning, and inspecting of parts of assembled components and assemblies.
- Meets the expected assembly timelines that are outlined on production orders
- Ask questions when instructions are not understood or clear
- Remain focused on production orders and assembly responsibilities throughout the day
- Performs any combination of the above duties from the functions above. Cross-train on various functions in order to provide flexibility and support across production operations.
- Must maintain a safe and clean working environment through compliance with procedures, policies and regulations.
- Notify Engineering of issues during assembly or suggested improvements
- Assists in inventory Cycle counting as needed and notify supervisor of low stock levels
- Train new employees on assembling components and products
In addition to the essential functions and duties listed above, all positions are also responsible for:
- Meeting company standards pertaining to quantity and quality of work performed on an ongoing basis, performing all work-related tasks in a manner that is in compliance with all Company policies and procedures.
- Adhering to Company policies, procedures, and directives regarding standards of workplace behavior in completing job duties and assignments.
The Company retains the right to change or assign other duties to this position.
Physical Activities:
Work may be active, could stand or sit for long durations and/or perform repetitious work at times. The employee may lift or move objects up to 20 pounds. Employees must grasp, manipulate, or assemble parts and components that are often very small. The noise level in the work environment is usually moderate, however, may be noisy at times. Must be able to wear appropriate clothing and personal protective equipment such as but not limited to masks, glasses, gloves, and specialty garments. The required PPE and training allow for the safe handling and processing of chemicals like adhesives, lubricants and solvents, and safe operation of job-related equipment and tools.
Qualifications
Experience:
- Minimum 3 to 5 years of working experience with mechanical, electrical, or optical assembly in a manufacturing environment. Experience with soldering capability in a similar position preferred.
Education:
- High school diploma or equivalent.
Specialized Knowledge and Skills:
- Strong attention to detail
- Strong ability to work well in a group atmosphere and comply with high quality standards.
- Strong ability to shift from one task to another to address changing production priorities.
- Must be able to understand written work instructions and schematics for a wide range of products to properly assemble the final product. Basic mathematic skills are required. Must be proficient in reading blueprints and possess familiarity with standard parts and tools utilized in soldering processes.
The estimated pay range for this role is $18.00/hour to $25.55/hour D.O.E.
Benefits
Thorlabs offers a complete benefits package that includes medical, dental and vision insurance, company paid life insurance, a generous PTO package, a 401(k) plan, and tuition reimbursement just to name a few..
Not Specified
Service Estimator
✦ New 🏢 CPG
Salary not disclosed
Position:
Service Estimator
Location:
19775 Belmont Executive Plaza
Suite 200
Ashburn, VA
Job Id:
872
# of Openings:
1
TITLE: Service Estimator
LOCATION: Ashburn, VA
POSITION SUMMARY: The Service Estimator supports the department with developing cost estimates and cost budgets for new projects across a portfolio of fast-paced service projects. You will be involved in the solutioning, pricing and proposal phases of service opportunities projects.
ESSENTIAL DUTIES AND RESPONSIBILITIES: To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
QUALIFICATIONS:To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Education/Experience:
Computer Skills:
Certificates and Licenses:
Supervisory Responsibilities:
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.
CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.
*We Utilize E-verify
#LI-TG1
Pay Range: $65,013 - $97,580 per year
Apply for this Position
Service Estimator
Location:
19775 Belmont Executive Plaza
Suite 200
Ashburn, VA
Job Id:
872
# of Openings:
1
TITLE: Service Estimator
LOCATION: Ashburn, VA
POSITION SUMMARY: The Service Estimator supports the department with developing cost estimates and cost budgets for new projects across a portfolio of fast-paced service projects. You will be involved in the solutioning, pricing and proposal phases of service opportunities projects.
ESSENTIAL DUTIES AND RESPONSIBILITIES: To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
- Review and understand RFP/RFQ documents from customers and supports request for information (RFI) process
- Identify project risks and/or challenges as part of solutioning process
- Assist in generation of rough order of magnitude and/or formal estimates for potential projects
- Assist in proposal development
- Maintain a well organize database of bid documents for reference upon award of contract to manage the kickoff process with the PreCon Manager.
- Support vendor submittal process for assigned projects
- Identify additional revenue opportunities for CPG, as applicable
- Coordinate with personnel from sales, engineering, preconstruction, execution and finance teams.
- Collect different quotes from subcontractors, vendors, and suppliers pertaining to the task at hand.
- Review and assess cost estimates.
- Identify labor, material, costs and time requirements by researching proposals, blueprints, and any related documents.
- Solicit input from CPG subject matter experts to clearly define job scope and requirements for self-performance opportunities.
- Prepare detailed cost estimate reports.
- Maintains cost database by entering and backing up data.
- Oversee the different stages of a company project to ensure that expenses follow the forecast plan.
- Provide estimation support (change orders) for ongoing projects as necessary.
- Participate in post-performance job analysis to identify challenges and incorporate solutions in future efforts.
- Present complex and detailed reports to management
QUALIFICATIONS:To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Education/Experience:
- Bachelor's degree in Construction Cost Management or Quantity Surveying or equivalent
- 3+ years of experience in construction estimating/cost control field, with specific knowledge of MEP and ASC cost elements
- 1+ years of data center experience is preferred
- Ability to interpret contract terms, conditions, and exhibits as applicable to project requirements
- Strong interpersonal skills and the ability to work both independently and in a team environment
- Excellent organizational and problem-solving skills
- Demonstrated experience developing and justifying budgets
- Ability to create and maintain processes for project documentation
- Ability and willingness to think outside of the box to find creative and innovative solutions prior to and during the construction process to reduce costs with no impact on quality and reliability
- Possess excellent communication skills, attention to detail, and be able to maintain high-quality standards
Computer Skills:
- Windows power user skill set, proficient with Microsoft Office Suite, and estimating software such as Accubid, RS Means, On Screen Take Off, Bluebeam.
- Procore Software for vendor management.
Certificates and Licenses:
- None
Supervisory Responsibilities:
- No supervisory requirements for this role
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
- Prolonged periods of sitting at a desk or working on a computer. Must be able to lift up to 15-25 pounds at a time. May be required to walk around facility.
The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.
CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.
*We Utilize E-verify
#LI-TG1
Pay Range: $65,013 - $97,580 per year
Apply for this Position
Not Specified
E
Information Technology Operations Engineer
Salary not disclosed
EdgeCore Digital Infrastructure serves the world’s largest cloud and internet companies with both ready-for-occupancy and build-to-suit data center campuses that are designed for density. Privately held and backed by committed equity to fund an aggregate amount of over USD $16.5 billion in development, EdgeCore enables hyperscale customer requirements by proactively investing in regions that provide the land and power necessary to support and scale AI and cloud technology. While working thoughtfully with the communities in which we do business, our data center campuses are built at scale to meet key performance specifications, safety metrics and sustainability objectives. EdgeCore has data center campuses in six North American markets with plans to expand into new regions in 2026 and beyond. For more information, please visit .
Career Opportunity
As an IT Operations Engineer, you will lead the support and operation of EdgeCore’s IT data center infrastructure. This role demands deep technical expertise, strategic thinking, and leadership in driving operational excellence across network, compute, and security domains and contributions to long-term infrastructure planning and innovation.
- Collaborate with Construction, Security, and Controls teams on IT architecture, and evolve data center infrastructure to meet scalability, performance, availability and security goals.
- Serve as a technical advisor to leadership on infrastructure investments and risk mitigation.
- Develop repeatable scalable solutions that can be applied to future deployments.
- Be the local resource on site, supporting end-users and other IT teams, such as network and security engineers, with technical problems.
- Communicate with IT leadership about local IT issues.
- Participate in the team on call rotation for after-hours events.
- Oversee complex network environments including multi-vendor switching, routing, and firewall platforms.
- Manage virtualization platforms (VMware, VSAN) and hybrid cloud integrations.
- Ensure high availability and disaster recovery readiness across all critical systems.
- Partner with security teams to implement zero-trust architectures and advanced threat detection.
- Ensure all systems are patched, and any exceptions are logged and communicated with the Cyber Security team.
- Maintain comprehensive documentation of infrastructure architecture, policies, and procedures.
- Ensure proper documentation of network and systems drawings.
- Ensure all work on critical systems is documented, and inventory management systems are kept up to date.
- Ensure changes are properly documented, and standards are adhered to by the IT team and all vendors working on behalf of IT.
- Demonstrate humility and a willingness to support wherever needed to make EdgeCore better.
- Treat employees, vendors, and contractors with respect, working to attain the best possible outcome.
- Maintain a service-oriented mindset, ensuring that systems and users are operational as quickly as possible.
- Demonstrate excellent communication skills, be approachable, and keep the appropriate stakeholders informed.
- Security is a shared responsibility. All employees are required to comply with company security policies and procedures and to help protect company information, systems, and assets in the course of their daily work.
Your Experience and Qualifications
- Bachelor’s or Master’s degree in Computer Science, Information Technology, or related field.
- 5+ years of experience in datacenter operations, infrastructure engineering, or network architecture.
- Advanced proficiency in VMware infrastructure, Cisco/Fortinet and Meraki networking, hybrid cloud platforms, Windows Server and Active Directory, and Fortinet firewalls, Okta, Entra ID.
- Proven track record in leading infrastructure projects and mentoring technical teams.
- Strong understanding of security frameworks (NIST, ISO 27001) and compliance requirements.
- Certifications such as CCNP, CISSP, VCP, or equivalent are highly desirable.
- Strategic thinker with strong analytical and problem-solving skills.
- Excellent communication and leadership abilities.
- Comfortable working in high-growth, fast-paced environments.
- Detail-oriented with a commitment to documentation and process rigor.
What We Offer
- Full-time salaried, exempt role: Includes equity compensation and a performance-based annual bonus.
- Annual base salary range: $130,000 – $150,000, depending on experience.
- In-office expectations: This is an on-site role, with in-person presence required five days per week at our Ashburn, VA data center site.
- Medical, dental, and vision insurance: Includes a $0-premium medical plan option (employee only option).
- Flexible Spending Accounts & Health Spending Account: Health & Dependent Care FSA, Limited-Purpose FSA, and an HSA with a company contribution.
- Paid time off: 120 hours of annual paid time off, 11 paid holidays, 7 sick days, and 8 hours of volunteer time annually.
- Retirement savings: 401(k) retirement savings plan with a company contribution.
- Life and disability insurance: Company-paid life and disability insurance.
- Parental leave: Paid parental leave for eligible new parents, available after meeting service requirements.
- Employee assistance program (EAP): Confidential support services for employees and their families, including counseling, financial guidance, and legal resources.
- Educational assistance: Company-sponsored educational reimbursement for approved courses and certifications.
- Employee support & discounts: Access to company-sponsored discount programs and employee well-being resources.
Not Specified
Principal Mechanical Design Engineer - Data Center Infrastructure (REMOTE)
Salary not disclosed
Principal Mechanical Integration Engineer
Mechanical Design Engineering
Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.
This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.
Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.
Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.
Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.
Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.
Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.
Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.
Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).
Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.
Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.
Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.
Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.
Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.
Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.
Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.
Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.
Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.
8 years' experience in mechanical design and integration of mission-critical systems.
~ Proven track record of successful system designs and implementations in a relevant industry
~ Strong understanding of mechanical systems, integration strategy, and system coordination
~ Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.
~ Master’s Degree in Mechanical Engineering
~
Remote working/work at home options are available for this role.
Mechanical Design Engineering
Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.
This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.
Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.
Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.
Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.
Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.
Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.
Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.
Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).
Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.
Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.
Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.
Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.
Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.
Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.
Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.
Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.
Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.
8 years' experience in mechanical design and integration of mission-critical systems.
~ Proven track record of successful system designs and implementations in a relevant industry
~ Strong understanding of mechanical systems, integration strategy, and system coordination
~ Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.
~ Master’s Degree in Mechanical Engineering
~
Remote working/work at home options are available for this role.
permanent
Principal Thermal Rack Engineer (Rack Integration Solutions) - Hybrid Work Flexibility (AUSTIN)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
**This position supports hybrid work schedule depending on organization needs.**
How will you make an impact?
We are looking for a Principal Thermal Rack Engineer within the Intelligent Infrastructure Segment to drive advanced cooling solutions for high-performance computing systems. This role involves incorporating thermal components such as direct liquid cooling (DLC) systems, coolant distribution units (CDUs), and manifolds into network and server racks (EIA 19” and ORv3). You will leverage CFD tools to perform rack and system-level thermal and fluid analysis, ensuring optimal flow distribution, pressure drop, and temperature performance. Additionally, you will create 3D CAD designs for seamless hardware integration, lead validation testing, and resolve thermal or flow issues through root cause analysis and corrective actions. Collaboration with cross-functional teams, customers, and global vendors is essential to align thermal architectures with overall system design and international standards.
What will you do?
- Lead the end-to-end integration and testing of rack thermal solutions, including liquid cooling systems in varying form factors and product lines.
- Use CFD tools (FloTherm or Macroflow) to perform switch, rack, and system-level thermal/fluid analysis (flow distribution, pressure drop, and temperature profiling).
- Design and optimize thermal components using 3D CAD (Creo or SolidWorks) to support seamless hardware integration and testing.
- Participate in customer engagements and site visits to understand and document deployment constraints and gather feedback for design improvements.
- Partner with factory teams to ensure racks are built with proper airflow, hose routing, and thermal safeguards, while establishing best practices that improve build consistency across deployments.
- Collaborate with Architects/Compliance/Reliability and global vendors to align thermal architectures with total system design and international data center/thermal/mechanical standards (e.g., UL, OCP, ASHRAE, ISTA, ASTM, NEBS).
- Conduct thermal, mechanical, and reliability testing, analyzing airflow, coolant flow rates, pressure drops, and structural integrity to ensure compliance with the end-users’ specifications.
- Develop and maintain design documentation including BOMs, wetted materials compliance, test plans, and engineering change orders (ECOs).
- Manage relationships with mechanical/thermal component vendors to build out a robust partner ecosystem consisting of racks, CDUs, hoses, manifolds, QDs, and cold plates.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (e.g., in-row cooling, in-rack cooling, rear door heat exchangers).
- Conduct root cause analysis and corrective actions for mechanical and thermal failures or field issues.
- May perform other duties and responsibilities as assigned.
How will you get here?
Education:
- Bachelor’s Degree in Mechanical/Thermal Engineering, Systems Engineering, or related field is required
Experience:
- Minimum of 7+ years of experience in thermal/mechanical systems integration
- 3+ years of specific experience in rack-scale thermal design and analysis
- Strong understanding of mechanical systems, integration strategies, and large-scale program management
- Familiarity with server design, heatsinks, cold plates, hoses, and blind-mate connectors
- Proficiency in CFD simulation (e.g. ANSYS, 6Sigma, etc.) and 3D modeling software (e.g. SolidWorks, Creo)
- Hands-on experience with thermal chambers, fans, and coolant
- Excellent English communication skills (verbal and written) with strong technical leadership capabilities
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Capable of assessing projects, articulating risks, and developing project milestones
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management and customers
- Capable of influencing others and sharing best practices
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering, Systems Engineering or related field is preferred
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license preferred.
- Hands-on experience with prototype fabrication and testing; experience working with global suppliers and contract manufacturers a plus.
About Jabil’s Intelligent Infrastructure Group:
- Headquartered in Austin, TX, with a flagship facility located near The Domain and the Austin FC stadium
- Growing rapidly, with a team of more than 100 employees in Austin (500+ worldwide) and significant expansion planned through 2026
- Generated over $12 billion in FY25 revenue, driven largely by partnerships with major hyperscale customers
- Delivers cutting‑edge engineering, supply chain, and manufacturing solutions that power the world's AI infrastructure and global data center ecosystems
As part of the total rewards package, this position is eligible for:
- Annual bonus opportunity
- Medical, dental, and vision insurance plans
- Paid time off (PTO)
- 4 weeks of paid parental leave
- 11 company-paid holidays (9 fixed holidays and 2 optional floating holidays), subject to change yearly
- 401(k) retirement plan
- Employee stock purchase plan
Remote working/work at home options are available for this role.
How will you make an impact?
We are looking for a Principal Thermal Rack Engineer within the Intelligent Infrastructure Segment to drive advanced cooling solutions for high-performance computing systems. This role involves incorporating thermal components such as direct liquid cooling (DLC) systems, coolant distribution units (CDUs), and manifolds into network and server racks (EIA 19” and ORv3). You will leverage CFD tools to perform rack and system-level thermal and fluid analysis, ensuring optimal flow distribution, pressure drop, and temperature performance. Additionally, you will create 3D CAD designs for seamless hardware integration, lead validation testing, and resolve thermal or flow issues through root cause analysis and corrective actions. Collaboration with cross-functional teams, customers, and global vendors is essential to align thermal architectures with overall system design and international standards.
What will you do?
- Lead the end-to-end integration and testing of rack thermal solutions, including liquid cooling systems in varying form factors and product lines.
- Use CFD tools (FloTherm or Macroflow) to perform switch, rack, and system-level thermal/fluid analysis (flow distribution, pressure drop, and temperature profiling).
- Design and optimize thermal components using 3D CAD (Creo or SolidWorks) to support seamless hardware integration and testing.
- Participate in customer engagements and site visits to understand and document deployment constraints and gather feedback for design improvements.
- Partner with factory teams to ensure racks are built with proper airflow, hose routing, and thermal safeguards, while establishing best practices that improve build consistency across deployments.
- Collaborate with Architects/Compliance/Reliability and global vendors to align thermal architectures with total system design and international data center/thermal/mechanical standards (e.g., UL, OCP, ASHRAE, ISTA, ASTM, NEBS).
- Conduct thermal, mechanical, and reliability testing, analyzing airflow, coolant flow rates, pressure drops, and structural integrity to ensure compliance with the end-users’ specifications.
- Develop and maintain design documentation including BOMs, wetted materials compliance, test plans, and engineering change orders (ECOs).
- Manage relationships with mechanical/thermal component vendors to build out a robust partner ecosystem consisting of racks, CDUs, hoses, manifolds, QDs, and cold plates.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (e.g., in-row cooling, in-rack cooling, rear door heat exchangers).
- Conduct root cause analysis and corrective actions for mechanical and thermal failures or field issues.
- May perform other duties and responsibilities as assigned.
How will you get here?
Education:
- Bachelor’s Degree in Mechanical/Thermal Engineering, Systems Engineering, or related field is required
Experience:
- Minimum of 7+ years of experience in thermal/mechanical systems integration
- 3+ years of specific experience in rack-scale thermal design and analysis
- Strong understanding of mechanical systems, integration strategies, and large-scale program management
- Familiarity with server design, heatsinks, cold plates, hoses, and blind-mate connectors
- Proficiency in CFD simulation (e.g. ANSYS, 6Sigma, etc.) and 3D modeling software (e.g. SolidWorks, Creo)
- Hands-on experience with thermal chambers, fans, and coolant
- Excellent English communication skills (verbal and written) with strong technical leadership capabilities
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Capable of assessing projects, articulating risks, and developing project milestones
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management and customers
- Capable of influencing others and sharing best practices
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering, Systems Engineering or related field is preferred
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license preferred.
- Hands-on experience with prototype fabrication and testing; experience working with global suppliers and contract manufacturers a plus.
About Jabil’s Intelligent Infrastructure Group:
- Headquartered in Austin, TX, with a flagship facility located near The Domain and the Austin FC stadium
- Growing rapidly, with a team of more than 100 employees in Austin (500+ worldwide) and significant expansion planned through 2026
- Generated over $12 billion in FY25 revenue, driven largely by partnerships with major hyperscale customers
- Delivers cutting‑edge engineering, supply chain, and manufacturing solutions that power the world's AI infrastructure and global data center ecosystems
As part of the total rewards package, this position is eligible for:
- Annual bonus opportunity
- Medical, dental, and vision insurance plans
- Paid time off (PTO)
- 4 weeks of paid parental leave
- 11 company-paid holidays (9 fixed holidays and 2 optional floating holidays), subject to change yearly
- 401(k) retirement plan
- Employee stock purchase plan
Remote working/work at home options are available for this role.
temporary
S
SAP Engineer - Licensing and Compensation (Hybrid)
🏢 Securian
Salary not disclosed
*Securian Financial the internal position title is Engineering Sr Analyst or Engineering Consultant. Title and salary will be determined based on applied skills.*
Position Summary:
Join theEnterprise Partner Solutions (EPS)team as aLicensing and Compensation Engineer, where you'll drive innovation in partner experience using cutting-edge SAP technologies. This team envisions a future where every financial producer is empowered from day one through intuitive, reliable, and scalable technology. Our engineering team is committed to transforming the producer experience by delivering back-end systems that simplify onboarding, ensure compliance in licensing, and guarantee timely and accurate compensation. We strive to be the trusted backbone of producer operations, enabling our company to grow with confidence and integrity. If you're passionate about engineering solutions that make a measurable impact, this is your opportunity to shape the future of partner engagement at scale.
Responsibilities include but not limited to:
Support and maintain SAP technologies related to partner compensation and licensing, including APM (ICM), ALM, OK2, and Advanced Workflow.
Perform analysis, design, development, and integration on medium to high level complexity assignments.
Develop and support automation capabilities through webservices and APIs.
Troubleshoot and resolve incidents across the licensing and compensation platform, including integrations with internal and external systems.
Collaborate with product analysts, quality engineers, and business stakeholders to deliver enhancements and ensure platform stability.
Analyze job failures, support tickets, and backlog stories to identify trends and drive continuous improvement.
Participate in Agile ceremonies and contribute to sprint planning, story refinement, and retrospectives.
Document technical processes and contribute to knowledge sharing across the EPS team.
Qualifications:
Bachelor's degree in Computer Science, Information Systems, or related field, or equivalent experience.
3+ years of experience supporting SAP technologies, preferably in compensation or licensing domains.
Familiarity with SAP ICM/APM and ALM modules.
Strong problem-solving skills and ability to manage multiple priorities.
Excellent communication skills and ability to work cross-functionally.
Experience with Agile methodologies and DevOps practices is a plus.
Preferred Qualifications:
SAP Certification in relevant Modules
Development Languages: Java, Groovy, SQL, Git, IntelliJ, webservices
Understanding of compensation payment structures for agents and familiarity with licensing and regulatory compliance frameworks governing producer eligibility to sell products.
Ability to work independently and as part of a collaborative team.
Commitment to continuous learning and process improvement.
#LI-hybrid **This position will be in a hybrid working arrangement.**
Securian Financial believes in hybrid work as an integral part of our culture. Associates get the benefit of working both virtually and in our offices. If you're in a commutable distance (90 minutes) you'll join us 3 days each week in our offices to collaborate and build relationships. Our policy allows flexibility for the reality of business and personal schedules.
The estimated base pay range for this job is:
$72,000.00 - $134,000.00Pay may vary depending on job-related factors and individual experience, skills, knowledge, etc. More information on base pay and incentive pay (if applicable) can be discussed with a member of the Securian Financial Talent Acquisition team.
Be you. With us. At Securian Financial, we understand that attracting top talent means offering more than just a job - it means providing a rewarding and fulfilling career. As a valued member of our high-performing team, we want you to connect with your work, your relationships and your community. Enjoy our comprehensive range of benefits designed to enhance your professional growth, well-being and work-life balance, including the advantages listed here:
Paid time off:
We want you to take time off for what matters most to you. Our PTO program provides flexibility for associates to take meaningful time away from work to relax, recharge and spend time doing what's important to them. And Securian Financial rewards associates for their service by providing additional PTO the longer you stay at Securian.
Leave programs: Securian's flexible leave programs allow time off from work for parental leave, caregiver leave for family members, bereavement and military leave.
Holidays: Securian provides nine company paid holidays.
Company-funded pension plan and a 401(k) retirement plan: Share in the success of our company. Securian's 401(k) company contribution is tied to our performance up to 10 percent of eligible earnings, with a target of 5 percent. The amount is based on company results compared to goals related to earnings, sales and service.
Health insurance: From the first day of employment, associates and their eligible family members - including spouses, domestic partners and children - are eligible for medical, dental and vision coverage.
Volunteer time: We know the importance of community. Through company-sponsored events, volunteer paid time off, a dollar-for-dollar matching gift program and more, we encourage you to support organizations important to you.
Associate Resource Groups: Build connections, be yourself and develop meaningful relationships at work through associate-led ARGs. Dedicated groups focus on a variety of interests and affinities, including:
Mental Wellness and Disability
Pride at Securian Financial
Securian Young Professionals Network
Securian Multicultural Network
Securian Women and Allies Network
Servicemember Associate Resource Group
For more information regarding Securian's benefits, please review our Benefits page.
This information is not intended to explain all the provisions of coverage available under these plans. In all cases, the plan document dictates coverage and provisions.
Securian Financial Group, Inc. does not discriminate based on race, color, religion, national origin, sex, gender, gender identity, sexual orientation, age, marital or familial status, pregnancy, disability, genetic information, political affiliation, veteran status, status in regard to public assistance or any other protected status. If you are a job seeker with a disability and require an accommodation to apply for one of our jobs, please contact us by email at , by telephone (voice), or 711 (Relay/TTY).
To view our privacy statement click here
To view our legal statement click here
Remote working/work at home options are available for this role.
Not Specified
Senior Databricks AI/ML Engineer
✦ New 🏢 LHH
Salary not disclosed
LHH is seeking a Senior Databricks AI/ML Engineer to join our client's team in a fully remote role based in Seattle, WA. Candidates must live in one of the following states, and be prepared to pass a background check/identity verification process: WA, OR, ID, OH, SC, NC, TX, or FL
LHH has a dynamic and challenging opportunity for a Senior Databricks AI/ML Engineer to join our client's engineering team. This role focuses on building and deploying scalable AI/ML solutions across key areas of the insurance functions, including underwriting, claims, pricing, customer engagement, and fraud detection, with a strong emphasis on Databricks architecture and ecosystem integration. The engineer will collaborate closely with data scientists, actuaries, product owners, and engineers to operationalize models, transforming them into robust, production-grade systems seamlessly integrated into business workflows and enterprise platforms.
Salary & Benefits:
- $150k to $185k annually (depending on location & experience)
- Medical, dental, and vision insurance
- 401(k) plan with employer match
- Vacation time accrues at a rate of 10 days annually, with increases based on a tenure schedule, up to a maximum of 25 days per year.
- PTO included Four (4) personal days are granted immediately upon hire.
- Paid holidays are provided for the eight (8) holidays observed in this role throughout the calendar year.
- Up to ten (10) days of sick leave are granted immediately upon hire (pro-rated based on hire date and full-time/part-time status).
- Additional paid time off is available for bereavement, jury duty, and employee volunteer activities in the community.
- Life and disability insurance
Minimum Qualifications:
- Bachelor's degree in Computer Science, AI/ML, Data Science/Engineering, or related field (or equivalent experience).
- 6+ years experience in ETL pipelines, SQL Server, and production data workflows.
- 3+ years enterprise experience with Azure & Databricks AI/ML, including data analysis and visual analytics.
- 3+ years applying ML algorithms and transforming data science prototypes into production.
- 5+ years experience with CI/CD workflows for ML models and related code.
- Strong SQL, real-time and batch data pipeline development, and unsupervised learning techniques.
- Familiarity with agile methodologies (e.g., Scrum).
Responsibilities:
- Conduct customer workshops to gather requirements and design analytics architectures using Azure and Databricks AI/ML.
- Serve as Databricks Architect, managing workspace design, deployment, and governance across environments.
- Define and implement Databricks Lakehouse architecture and governance best practices.
- Integrate Databricks with Azure services and lead implementation of Databricks SQL, Delta Live Tables, and MLflow.
- Develop and maintain automated MLOps workflows for model deployment, monitoring, and lifecycle management.
- Set up and configure Azure and Databricks infrastructure for AI/ML workloads.
- Review ML model code and analytics scripts for quality and performance.
- Design and build data pipelines and cloud services for monitoring, analysis, and reporting.
- Develop robust ETL workflows using Databricks, Spark, and SQL Server for structured and unstructured data.
- Provide production support and performance tuning for data engineering workflows.
- Optimize complex SQL queries and stored procedures for data processing and business logic.
- Collaborate with cross-functional teams to ensure data quality and support business decision-making.
- Scale and deploy machine learning models to handle large-scale data.
- Feed raw data into models and build deployment pipelines for new models.
- Implement logging, observability, and performance monitoring for AI/ML systems.
- Conduct architecture reviews and performance testing.
- Perform other duties as assigned.
Preferred Qualifications:
- Master's degree in a related field.
- Experience in the insurance industry (Auto, Home, Umbrella) and related AI/ML applications.
- Proficiency with tools/platforms: Azure ML, Databricks, Microsoft Fabric, Synapse, Power BI, Snowflake, and APIs like Azure OpenAI and Cognitive Services.
- Knowledge of streaming frameworks: Apache Kafka, Azure Event Hubs, Delta Live Tables.
- Strong math, problem-solving, and rapid learning skills.
- Excellent communication, organization, and independent work capabilities.
- Service-oriented mindset with ability to handle ambiguity and build strong relationships.
Equal Opportunity Employer/Veterans/Disabled
To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable:
• The California Fair Chance Act
• Los Angeles City Fair Chance Ordinance
• Los Angeles County Fair Chance Ordinance for Employers
• San Francisco Fair Chance Ordinance
Remote working/work at home options are available for this role.
Not Specified
D
Senior Engineer, Global Services - Hybrid
Salary not disclosed
DivIHN (pronounced “divine”) is a CMMI ML3-certified Technology and Talent solutions firm.
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries about this opportunity, please contact one of our Talent Specialists, Hema, at (63 or Sri Balan at (63 Title: Senior Engineer, Global Services
- Hybrid Location: Medina, NY Duration: 12 Months Hours: 9 AM
- 5 PM Flexible on availability to be on-site, with someone who can work 1-2 days per week, Open to relocation and considering senior candidates.
must have the ability to travel Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered.
Description: Summary: Applies a solid understanding of engineering and problem-solving theories/practices toward the development of new or enhanced products or processes.
Creates service deliverables and infrastructure required to support initial product launch and lifecycle management.
Capable of designing machine tooling, jigs, fixtures, gauges and equipment used in the servicing process.
Capable of checking designs and drawings against general standards, design requirements, geometric tolerances, drafting practices and the manufacturing process involved.
The work of the individual should be highly creative, of high quality and offer wide latitude for independent judgment and perception with a minimal amount of supervision.
Need not have any tools/ software experience, CAD would be a plus.
Medical background will be a plus any regulatory background will be good.
Someone who was worked with Engineers, multitasking will be a great fit.
Ambiguity, adapt, multi-task and works with lead engineer in projects.
Support the team of Product core and represent service operations and supply chain.
Will be in charge of Service change implementation.
Focuses on design changes, process changes.
Collaborates with Service Process, Engineers, Technicians, impact of changes.
Oversees Document Revision, Handle Change control, mentored and directed by team to tackle multiple product and project Essential Duties and Responsibilities: 1.
Creates new product development and lifecycle management service deliverables throughout the product lifecycle for medical device products involving hardware.
2.
Supports new product platform releases.
Develops and implements service training, test equipment, tools, spare parts, and service manuals / instructions.
3.
Evaluates / makes recommendations on product releases related to design for serviceability.
Creates (or modifies existing) servicing processes and manuals to support repair or refurbishment of fielded product at multiple global sites or in the field.
4.
Works closely with design team to select, develop, and implement technologies across all medical device development programs.
5.
Analyzes key servicing metrics to identify and implement opportunities for improvement in service process quality, cost, or product reliability.
6.
Coordinates information flow between corporate and local/regional teams.
7.
Owns Corrective and Preventive Actions related to the product(s) core team(s) supported, using sound root cause analysis.
8.
May represent Technical Services on new product development and/or lifecycle management core teams.
9.
May independently plan, schedule and lead cross-functional teams in detailed phases of the engineering work in a project.
10.
May approve the work of lower level engineers; may supervise other engineers or technicians Minimum Qualifications: 1.
Must be well versed in core engineering disciplines (e.g.
mechanical, electrical, software, systems engineering).
2.
Highly motivated self-starter who is able to work with minimal supervision.
3.
Must have good interpersonal and oral/written communication skills, good time management, and be capable of analyzing and solving technical problems through innovative thought and application of sound engineering principles and root cause analysis.
4.
Experience with change control methodologies and configuration management principles is a plus.
5.
Experience with test engineering and/or reliability engineering principles is a plus.
6.
Ability to exercise independent judgment and draw conclusions based on available information.
7.
Good understanding of GMP and quality system requirements.
Education and/or Experience: Bachelor's degree in a core engineering discipline (mechanical, electrical, software, systems, or mfg/process engineering) plus 3-5 years of experience.
Medical device experience or other regulated industry experience preferred.
Experience in the use of Lean Six Sigma tools highly desirable.
About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
GMP, Medical Device, Lean Six Sigma
Remote working/work at home options are available for this role.
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries about this opportunity, please contact one of our Talent Specialists, Hema, at (63 or Sri Balan at (63 Title: Senior Engineer, Global Services
- Hybrid Location: Medina, NY Duration: 12 Months Hours: 9 AM
- 5 PM Flexible on availability to be on-site, with someone who can work 1-2 days per week, Open to relocation and considering senior candidates.
must have the ability to travel Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered.
Description: Summary: Applies a solid understanding of engineering and problem-solving theories/practices toward the development of new or enhanced products or processes.
Creates service deliverables and infrastructure required to support initial product launch and lifecycle management.
Capable of designing machine tooling, jigs, fixtures, gauges and equipment used in the servicing process.
Capable of checking designs and drawings against general standards, design requirements, geometric tolerances, drafting practices and the manufacturing process involved.
The work of the individual should be highly creative, of high quality and offer wide latitude for independent judgment and perception with a minimal amount of supervision.
Need not have any tools/ software experience, CAD would be a plus.
Medical background will be a plus any regulatory background will be good.
Someone who was worked with Engineers, multitasking will be a great fit.
Ambiguity, adapt, multi-task and works with lead engineer in projects.
Support the team of Product core and represent service operations and supply chain.
Will be in charge of Service change implementation.
Focuses on design changes, process changes.
Collaborates with Service Process, Engineers, Technicians, impact of changes.
Oversees Document Revision, Handle Change control, mentored and directed by team to tackle multiple product and project Essential Duties and Responsibilities: 1.
Creates new product development and lifecycle management service deliverables throughout the product lifecycle for medical device products involving hardware.
2.
Supports new product platform releases.
Develops and implements service training, test equipment, tools, spare parts, and service manuals / instructions.
3.
Evaluates / makes recommendations on product releases related to design for serviceability.
Creates (or modifies existing) servicing processes and manuals to support repair or refurbishment of fielded product at multiple global sites or in the field.
4.
Works closely with design team to select, develop, and implement technologies across all medical device development programs.
5.
Analyzes key servicing metrics to identify and implement opportunities for improvement in service process quality, cost, or product reliability.
6.
Coordinates information flow between corporate and local/regional teams.
7.
Owns Corrective and Preventive Actions related to the product(s) core team(s) supported, using sound root cause analysis.
8.
May represent Technical Services on new product development and/or lifecycle management core teams.
9.
May independently plan, schedule and lead cross-functional teams in detailed phases of the engineering work in a project.
10.
May approve the work of lower level engineers; may supervise other engineers or technicians Minimum Qualifications: 1.
Must be well versed in core engineering disciplines (e.g.
mechanical, electrical, software, systems engineering).
2.
Highly motivated self-starter who is able to work with minimal supervision.
3.
Must have good interpersonal and oral/written communication skills, good time management, and be capable of analyzing and solving technical problems through innovative thought and application of sound engineering principles and root cause analysis.
4.
Experience with change control methodologies and configuration management principles is a plus.
5.
Experience with test engineering and/or reliability engineering principles is a plus.
6.
Ability to exercise independent judgment and draw conclusions based on available information.
7.
Good understanding of GMP and quality system requirements.
Education and/or Experience: Bachelor's degree in a core engineering discipline (mechanical, electrical, software, systems, or mfg/process engineering) plus 3-5 years of experience.
Medical device experience or other regulated industry experience preferred.
Experience in the use of Lean Six Sigma tools highly desirable.
About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
GMP, Medical Device, Lean Six Sigma
Remote working/work at home options are available for this role.
Not Specified
jobs by
✓ All jobs loaded