Engineering Structures Jobs in Navassa, NC

Are you a Chassis Designer Engineer looking for a new challenge and an opportunity to further advance your skills and career in a great working environment? Join our fast-growing team supporting leading Aerospace companies! If you are a highly motivated individual, a self-starter with an entrepreneurial spirit and a genuine interest in technology, we have the perfect job for you!

The Role

The I&C chassis designer works within the I&C Technology team and is responsible for designing and implementing supporting structures to mount I&C electronic hardware for safety related systems at Power Plants. Typically, they would have an Engineering degree. The I&C Technology team has strong interfaces with electronic hardware design and qualification testing teams. This role requires technical problem solving, strong design skills, understanding of codes and standards, and effective communication/collaboration with other teams.

Applicants must be US Citizen or Permanent Resident. Remote with 10% travel to Wilmington, NC.

Roles & Responsibilities:

• Understanding system requirements, including EMC, Seismic, and other applicable standards.

• 2D / 3D modeling of Instrumentation and Controls chassis and other misc. electrical equipment

• Understanding of electrical schematics, connector panel design, wire harness design, cable routing design.

• Connector selection and design.

• Performing integration testing of the design and documenting test results.

• Performing Verification of Design Specifications and Reports.

• Engage customers to define scope, review results, and discuss technical risks.

• Work with Tech Leads to establish an effective work plan, including time estimates, schedule estimates, requirements and work processes.

• Apply engineering fundamentals and 1st order engineering principles to establish and/or confirm expected performance.

• Provide clear and complete analysis documentation in accordance with GE engineering procedures.

• Manage time effectively to provide quality deliverables within the expected project timeline.

• Communicate effectively to leadership the status of work activities.

• Effectively manage multiple priorities.

Required Skills (Technical Competency):

Bachelor’s degree in mechanical, electrical, or related engineering degree from an accredited college of university.

• 4-6 years of experience

• Knowledge of common 2D / 3D drawing programs.

• Experience with coding conventions, unit testing and integration testing of control cabinets and chassis.

• Minimum 5 years of experience in field.

• US Citizen or Permanent Resident required

Additional Desired Characteristics

• Solves technical challenges through application of common design patterns and identifying appropriate patterns for use in problem solving.

• Inventor experience (including Vault)

• AutoCAD experience.

• Experience understanding coding standards that meets and delivers desired functionality using technology selected for the project.

• Excellent written and verbal communications skills and ability to articulate clearly.

• Contributes to creative solutions and challenges status quo.

• Proactively learns new tools and identifies opportunities for improvement and promotes their adoption.

Physical Requirements & Work Environment:

• Mostly Office Environments, Occasional Shop Floor involvement.

• Substantial amounts of telephone and computer work.

• Heavily Regulated Industries with strict adherence to procedures.

• Flexibility to meet business deadlines by staying late or arriving early.

• Typical 8 hour days plus lunch / 40 hour weeks / core (required) hours are 9AM to 4PM

• Ability to use personal transportation to visit customer locations.

• Due to the nature of the work, all candidates must be a U.S. Citizen or Permanent Resident.

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.

We are looking for humble geniuses, who believe that engineering has the potential to make the impossible, possible; innovators, who are not only inspired by technology and innovation, but also perpetually driven to design, develop, and test as a trusted partner for Fortune 500 customers.

As a team of remarkably diverse engineers, we recognize that what we are really engineering is a brighter future for us all. If you want to contribute to meaningful work and be part of an organization that truly believes when you win, we all win, and when you fail, we all learn, then we’re eager to hear from you.

The achievers, high performers, and courageous challenge-crushers we seek, have the following characteristics and skills:

WHAT'S ON OFFER

• Base salary depending on experience level.
• Annual and project-based bonuses
• Company vehicle or vehicle allowance (depending on candidate preference), along with inclusive benefits package
• Very strong project pipeline and family-oriented culture – clear progression potential.

Areas of expertise include: ground-up commercial, K-12, healthcare, or government

The Project Manager will lead the project team and have overall responsibility for the success of assigned project(s) with a focus on budgeting, planning, scheduling, quality, and relationship with owners and subcontractors

Select Responsibilities:

• Work with project team to ensure timely completion and accuracy of project information and targets
• Organize and participate in project meetings with staff, owners, architects, and trade partners
• Prepare contracts and change orders in a timely fashion
• Prepare and communicate monthly variance cost/budget reports to the management team
• Provide oversight for all phases of construction, including safety, staffing, and ensuring contract documents are being followed and work is on schedule and within budget
• Foster strong partnership with owner to help the firm continue building on their 80% repeat business with current clients
• Produce and assist in close-out documentation

CANDIDATE QUALIFICATIONS

• Bachelor’s degree in civil engineering, construction management or other relevant discipline
• Minimum of three years’ experience in the multifamily and commercial construction industries
• Successfully managed multiple projects to completion with values ranging from $10M-$60M
• Ability to organize, analyze, and problem solve challenges when they occur on assigned projects
• Effective communication and ability to build/foster strong relationships with all internal and external stakeholders

Job description:

Auto Press Operator (Future Production Manager Track)

CSI Promotions – Wilmington, NC

CSI Promotions is growing and looking for a skilled Auto Press Operator who wants more than just a job — someone interested in developing into a Production Manager role over time.

We are a premium custom apparel company focused on quality, organization, and doing the job right the first time. We run ROQ automatic presses and maintain a clean, climate-controlled facility. Experience on ROQ, M&R, Anatol, MHM, or Workhorse equipment is welcomed.

What We’re Looking For:

• 6+ months auto press experience preferred (will train the right person)
• Self-motivated and detail-oriented
• Emotionally mature and team-focused
• Comfortable troubleshooting and thinking ahead
• Takes ownership and pride in their work
• Interested in long-term growth

Responsibilities:

• Set up and run jobs efficiently on automatic press
• Inspect work orders and maintain quality control
• Troubleshoot issues and minimize waste
• Maintain equipment cleanliness and basic upkeep
• Optimize screen sequencing and workflow
• Contribute to continuous improvement on the production floor

Compensation & Benefits:

• Starting at $20/hr+, based on experience
• Overtime opportunities
• Paid holidays
• 10 days accrued PTO after 60 days
• Monday–Friday schedule (optional 4-day workweek structure)
• Climate-controlled shop (75° even in summer)

Our Shop:

Founded in 1995, CSI Promotions specializes in high-quality branded apparel for local and regional businesses. We do not contract print — our focus is on building strong brands and long-term client relationships. Our facility is clean, organized, and respectful. We care about systems, accountability, and craftsmanship.

If you want to grow with a company that values professionalism, precision, and culture — we’d love to meet you.

Job Type: Full-time

Benefits:

• Employee discount
• Flexible schedule
• Paid time off

Link to Job Posting:

Job Summary

We are seeking a Mechanical Engineer III to serve as a Cable/Ribbon Assembly Equipment Capability Engineer supporting high volume cable manufacturing operations. This role is highly technical and focused on equipment capability, mechanical performance, and process robustness for cable assembly lines. The engineer will be responsible for driving equipment performance improvements, ensuring process capability, and supporting new equipment introduction and line expansions.

Key Responsibilities

Equipment Capability & Performance

* Own mechanical capability of cable/ribbon assembly equipment

* Establish and maintain equipment capability metrics (OEE, Cp/Cpk, uptime, scrap, yield)

* Lead mechanical capability studies, line balancing, and throughput optimization efforts

* Identify mechanical constraints impacting line speed, tension stability, concentricity, and dimensional control Mechanical Engineering & Design

* Design, modify, and optimize tooling, fixturing, guides, rollers, payoff systems, and tension control mechanisms

* Develop detailed 2D drawings and 3D CAD models for equipment upgrades and custom tooling

* Perform engineering calculations related to tension, torque, inertia, thermal effects, and material deformation

* Support equipment retrofits and modernization projects

Manufacturing Support & Troubleshooting

* Provide hands on technical support during production, trials, and equipment start ups

* Perform structured root cause analysis (mechanical, process, interface issues) and implement corrective actions

* Collaborate with process, controls, maintenance, and quality teams to resolve chronic equipment issues

* Support development and execution of FAT/SAT, IQ/OQ/PQ, and line acceptance criteria

New Equipment & Supplier Interface

* Define mechanical requirements and performance specifications for new cable assembly equipment

* Work directly with OEMs and system integrators on equipment design, build, and acceptance

* Review vendor drawings, layouts, and design proposals for compliance with performance and safety requirements

Documentation & Standards

* Create and maintain mechanical documentation including equipment specifications, PM standards, and change records

* Ensure compliance with applicable safety, ergonomic, and manufacturing standards

* Support continuous improvement initiatives using Lean and Six Sigma methodologies

Required Qualifications

* Bachelor's degree in Mechanical Engineering or related discipline

* 3-6 years of experience in cable manufacturing or cable assembly equipment engineering

* Strong hands on experience with ribboning, stranding, extrusion, shielding, jacketing, or armoring equipment

* Deep understanding of mechanical systems in continuous manufacturing environments

* Proficiency in CAD tools (SolidWorks, Creo, AutoCAD, or equivalent)

* Proficiency in data Analysis - JMP, Excel, Minitab

* Experience performing equipment capability analysis and production line optimization

* Strong troubleshooting and analytical problem solving skills

Preferred Qualifications

* Experience with ribbon cable manufacturing

* Knowledge of tension control systems, dancer mechanisms, capstans, and servo driven equipment

* Familiarity with statistical process control (SPC), Cp/Cpk analysis, and OEE

* Working knowledge of PLC controlled machinery and electro mechanical interfaces

* Experience leading or supporting high speed cable line scale ups

* Lean Manufacturing or Six Sigma certification

Work Environment

* Manufacturing floor and equipment build/commissioning environments

* Significant hands on interaction with operating production lines

* May require extended on site presence during trials and ramp ups

* Occasional travel to supplier or sister manufacturing sites

Job Title : Nuclear Engineer (Naval Reactors Engineer) Category / Component : Officer • Active Overview Design, regulate, and oversee the Navy's nuclear propulsion program, including reactor design, fleet operations, and eventual defueling and decommissioning of nuclear powered ships and submarines from Naval Reactors Headquarters and associated Department of Energy laboratories and shipyards.

Key Responsibilities Provide technical direction in areas such as reactor and fluid systems design, reactor physics, materials development, component design for steam generators, pumps, and valves, instrumentation and control for reactor and propulsion plants, testing and quality control, radiation shielding, and chemistry and radiological controls; review designs and analyses from laboratories, shipyards, and industry partners; coordinate with fleet units to ensure safe and reliable nuclear plant operation.

What to Expect Assume significant technical responsibility early in your career as part of a lean headquarters staff; work primarily in an analytical and oversight role rather than operating plants at sea; balance long term engineering projects with time sensitive fleet and shipyard issues; frequent coordination with senior civilian engineers, naval officers, and technical teams; high expectations for attention to detail, judgment, and written and oral communication.

Work Environment Work mainly at Naval Reactors Headquarters in the Washington, District of Columbia area with regular engagement with Department of Energy laboratories, nuclear training sites, shipyards, and nuclear powered ships and submarines; office based work that includes document reviews, technical meetings, inspections, and site visits rather than day to day shipboard watchstanding.

Pathways, Training & Advancement Officer commissioning through programs such as Officer Candidate School or the Nuclear Propulsion Officer Candidate program followed by a structured technical qualification program at Naval Reactors; rotational exposure to laboratories, prototypes, shipyards, and fleet support issues; progressive responsibility leading projects and becoming a subject matter expert, with opportunities for professional military education and advanced graduate study in technical fields.

Entry through the Nuclear Propulsion Officer Candidate program for qualified college students and recent graduates, or selection via Officer Candidate School for those who already hold qualifying degrees; all applicants must meet Nuclear Propulsion Program academic and technical screening standards in addition to general officer commissioning requirements.

Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy.

Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter.

Additional qualifications for this job may include: Completion of a rigorous technical degree in engineering, physics, mathematics, or a closely related field that includes strong backgrounds in calculus and physics; outstanding academic record, particularly in technical coursework; United States citizenship and eligibility for a high level security clearance; strong technical aptitude and comfort with detailed analytical work.

Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities.

Specific options depend on the Sailor's status, training, and current Navy policy.

Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options.

Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance.

Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed.

Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source.

Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community.

It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes.

Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.

Project Scheduler (BB Civils)

Become Part of Our Team

As an industry leader Balfour Beatty offers employees a comprehensive benefits package with competitive salaries and more including:

• Medical, Dental, Vision and Life Insurance
• Health Savings Account
• 401(k) with company match
• Flexible Spending Accounts (Dependent & Medical Reimbursement)
• Vacation Time
• Sick Time
• Holidays

Summary

This is a regional position, but is a support role for all projects in the SE Region. The role will require assisting in pre-construction scheduling for our \"Work Winning\" and \"Business Development\" teams in Wilmington, NC. The role will also require travel to various project sites to assist in schedule baselining, schedule updates, schedule workshops, etc. Lastly, the role will require project engineering assistance in the research and analysis of the contract documents required to establish accurate activity durations and schedule logic. This includes quantity takeoffs, production analysis, and research of project phasing and schedule driven project requirements.

Essential Functions

• Must know all aspects of scheduling software (P6 a must and MS Project a plus);
• Must have served in the role of a full time scheduler for at least 2 years (5 is ideal), and must have been the lead on a project schedule for at least 2 projects where submissions to the Owner / Client were required.
• Must have a firm understanding of Highway construction including traffic management and phasing;
• Must have firm understanding of contract requirements for CPM Schedules for DOT projects and Unit Price quantity driven scheduling techniques and cost loading.
• The role will require designation as the \"scheduling representative\" listed in DOT contracts.
• Lastly, the role will require assistance to project engineering tasks such as quantity takeoffs, production analysis, cost tracking, etc.

Additional Requirements

The candidate should have served in a Project Engineering and / or Project Management role on highway projects for 5 years prior to dedicating themselves to scheduling.

About Us

Balfour Beatty US is an industry-leading provider of general contracting, at-risk construction management and design-build services for public and private sector clients across the nation. Performing heavy civil and vertical construction, our teams build the unique structures and infrastructure that play an important role in how people live, work, learn and play in our communities. Our teammates have an instinctive passion for innovating that is fueled by a relentless curiosity, a drive to employ lean practices and processes and the determination to find a better way. Through Zero Harm, we are challenging the construction industry's assumptions about safety. We believe that no level of harm should come to anyone as a result of our business.

Consistently ranked among the nation's largest building contractors by Engineering News-Record, our US business is a subsidiary of London-based Balfour Beatty plc (LSE: BBY).

Balfour Beatty is an equal opportunity employer that recognizes the value of a diverse workforce. All qualified individuals will receive consideration for employment without regard to race, color, age, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, genetic information, or any other criteria protected by federal, state or local law.

Additional Job Information

This opportunity is with a well-established general contractor offering a structured development path into a high-performing Project Manager/Estimator and future division-level leader. The role blends project management, estimating, field exposure, and leadership development.

Role Highlights:

• Clear growth track covering project management, estimating, budgeting, leadership, and operations.
• Hands-on involvement in multiple project phases, both in the field and office.
• Strong emphasis on leadership skills, decision-making, integrity, and people management.

Key Responsibilities:

• Build core competency in cost control, job budgets, reporting, AP/AR, change management, and fair cost negotiation.
• Support or lead safe, efficient project execution with focus on quality, productivity, and profitability.
• Work closely with Project Engineers and Superintendents on forecasting, cost reporting, and project performance.
• Perform estimating tasks including takeoffs, plan/spec review, drilling/sampling, and material analysis.
• Execute day-to-day project management responsibilities.
• Develop skills in conflict management, emotional intelligence, and values-based leadership.

Required Background:

• 5+ years' construction experience.
• Ground up projects $30m plus.
• Associate or bachelor's degree preferred (Construction Management or Civil Engineering ideal but not required).
• Strong software skills: Word, Excel, Outlook, CAD, BlueBeam, HCSS/Agtek, Spectrum.
• Understanding of construction technology, equipment, means and methods, and OSHA standards.

We are seeking an experienced Technical Writer III to support complex documentation initiatives within a technology-driven engineering environment. This role will collaborate closely with engineering, product, and cross-functional teams to create and maintain high-quality technical documentation.

Key Responsibilities

• Develop, edit, and maintain technical documentation including:
• User manuals
• Installation guides
• Release notes
• Online help content
• FAQs and process documentation
• Collaborate with engineers, SMEs, and product teams to gather and translate technical information into clear, user-friendly content
• Manage documentation repositories and version control processes
• Ensure documentation accuracy, clarity, and compliance with company standards
• Maintain templates and ensure consistency across documentation
• Support documentation updates aligned with product changes and engineering revisions
• Manage multiple documentation projects and meet deadlines

Required Qualifications

• Bachelor's degree in Technical Writing, English, Communications, Computer Science, or related field
• 3–5+ years of technical writing experience
• Experience developing complex technical documentation
• Strong written and verbal communication skills
• Ability to explain technical concepts to non-technical audiences
• Strong organizational and time-management skills

Preferred Skills

• Experience with documentation tools such as:
• Windchill
• Adobe FrameMaker
• MadCap Flare
• RoboHelp
• Markdown editors
• Familiarity with CMS platforms and version control tools (Git/GitHub)
• Experience working in Agile or software development environments
• Basic knowledge of APIs or programming concepts
• Experience with AI-based documentation tools (a plus)