Engineering Structures Jobs in Jupiter Island Florida Remote

421 positions found

Project Manager (Architectural Signage)
Salary not disclosed
Jupiter, FL 2 days ago

This is an in-person position only.


About Us:

Baron Sign Manufacturing is South Florida’s premier design-build partner for custom architectural signage, structural monument signs, and comprehensive wayfinding packages. Operating out of our state-of-the-art manufacturing facility in Jupiter, FL, we partner with top-tier general contractors, developers, and Owner's Reps to deliver turnkey solutions for large-scale commercial, healthcare, and multi-family developments. Because we handle design, engineering, fabrication, and installation entirely in-house, we maintain uncompromising control over quality, budgets, and timelines.


The Role:

We are seeking a highly experienced Project Manager to take full ownership of complex, high-value architectural signage packages. This is not an entry-level or training position. We need a seasoned industry professional who can step in immediately to drive projects from the pre-construction handover through to final site installation. You will serve as the primary bridge between our Tier-1 commercial clients and our internal manufacturing floor.


Core Responsibilities:

  • Project Leadership: Direct and manage the entire lifecycle of turnkey signage packages, ensuring strict adherence to aggressive commercial construction schedules and budgets.
  • Blueprint & Code Knowledge: Independently evaluate complex architectural blueprints, interior finish packages, and structural engineering plans to conduct accurate, code-compliant take-offs (ADA, life safety, and vehicular wayfinding).
  • Client & Stakeholder Management: Serve as the authoritative point of contact for general contractors, architects, and developers, proactively solving structural or timeline conflicts before they impact the site.
  • Production Coordination: Work closely with the Estimating and Fabrication teams at our Jupiter plant to dictate project timelines, monitor deliverables, and sequence manufacturing workflows.


Required Qualifications:

  • Mandatory Industry Experience: A minimum of 3+ years of direct Project Management experience strictly within the custom signage manufacturing industry. (Candidates without direct signage experience will not be considered).
  • Technical Literacy: Deep understanding of custom metal fabrication, structural aluminum assemblies, and Florida Building Code requirements (including wind-load engineering and right-of-way permitting).
  • Software Proficiency: Advanced command of Microsoft Excel and modern project management software.
  • Executive Communication: Exceptional business acumen with the verbal and written authority required to manage high-end commercial construction accounts.
Not Specified
Locum Physician (MD/DO) - Anesthesiology - General/Other in Jupiter, FL
✦ New
Salary not disclosed
Jupiter, FL 1 day ago


Doctor of Medicine | Anesthesiology - General/Other

Location: Jupiter, FL

Employer: Rhino Medical

Pay: Competitive weekly pay (inquire for details)

Contract Duration: 2 Weeks

Start Date: ASAP


About the Position

LocumJobsOnline is working with Rhino Medical to find a qualified Anesthesiology MD in Jupiter, Florida, 33458!

Jupiter, Florida Anesthesiologist Locum Tenens

Full Time Schedule | Epic EMR | Care Team Model | Ongoing Need

Rhino Medical is leading the charge seeking a Board Certified Anesthesiologist for a full time locum tenens opportunity in Jupiter, Florida. This is an ongoing assignment at a high-volume, well-resourced medical center offering a collaborative anesthesia department and a desirable coastal location.

This position requires full time availability and participation in a structured call model.

Assignment Highlights

Location: Jupiter, Florida

Schedule Options:


  • Monday through Friday
  • 7:00 AM – 3:00 PM
  • 7:00 AM – 5:00 PM
  • Five 8s or Five 10s
  • Beeper call required

Coverage Type: Full Time Only (minimum 4 weeks per month)

Length of Need: Ongoing

Facility Overview

  • Average Monthly Cases: 1,150–1,200
  • OB Deliveries: ~200 per month
  • Care Team Model: 80/20 supervision
  • CRNAs: 26
  • MDs: 12
  • EMR: Epic
  • Dedicated cardiac team for heart cases

Meals Provided: Breakfast, lunch, and dinner available at no cost to clinicians.

Case Mix

Broad community and specialty anesthesia including:

  • General Surgery
  • Orthopedics
  • GI
  • Robotics
  • OB
  • Radiology
  • Endoscopy
  • Ophthalmology
  • Plastics
  • ENT
  • Neuro

No trauma coverage required. Cardiac cases handled by dedicated cardiac team.

Majority case types include General Surgery, Orthopedics, GI, and Robotics.

Supervision Model

  • Care Team Model
  • 80 percent medical direction / 20 percent independent
  • Collaborative environment with established CRNA team

Candidate Requirements

  • Board Certified Anesthesiologist 
  • Active Florida Medical License 
  • ACLS, BLS, PALS 
  • 100 percent clean background required (no clinical, legal, or pending matters)

Why This Opportunity?

  • High-volume, efficient anesthesia department
  • Epic EMR
  • Stable, collaborative care team structure
  • Coastal Florida location known for beaches, boating, parks, and year-round outdoor lifestyle
  • Onsite meal benefit
  • Ongoing long-term stability

Jupiter, Florida offers scenic waterfront living, access to pristine beaches, and a vibrant community lifestyle in The Palm Beaches region.

If you are a Board Certified Anesthesiologist seeking a structured full time assignment in a premier Florida coastal community, we encourage you to apply.

Submit your CV and required documentation today — Rhino Medical will handle the rest.

Always Forward. Always Focused. Always for You.

About Rhino Medical

At Rhino Medical Services, we don’t just staff locums—we fuel a mission to solve America’s healthcare shortage, one provider at a time. We exist for physicians who want more than just another assignment—who want to be heard, supported, and partnered with by a team that listens first and acts fast. Built on the mindset of aut inveniam viam aut faciam—“I will either find a way or make one”—we approach every opportunity with grit, intention, and heart. Our Tusk Experience is distinctive by design: white-glove service, transparent communication, and a commitment to serving with a sincere heart. You won’t find fluff here—just truth, loyalty, and a relentless drive to be the most referable name in locum tenens. Burn the ships. Join the mission. Choose Rhino.


1711734EXPPLAT

permanent
Design Quality Engineer
✦ New
🏢 HCLTech
Salary not disclosed

HCLTech is looking for a highly talented and self- motivated Design Quality Engineer to join it in advancing the technological world through innovation and creativity.


Job Title: Design Quality Engineer

Job ID: 78923

Position Type: Full-time with HCLTech

Location: Palm Beach Gardens, Florida



Role/Responsibilities:

Summary

The Design Quality Engineer will act as the quality representative and design control lead on cross-functional new product development (NPD) and sustaining engineering teams. This role ensures that orthopedic implants and associated instrumentation are developed and manufactured in compliance with internal QMS, FDA 21 CFR 820, ISO 13485, and ISO 14971 standards. The ideal candidate will facilitate risk management activities, verify design outputs, and ensure a smooth design transfer to manufacturing



Key Responsibilities

  • Design Control Leadership: Lead and support Design Control activities (planning, design inputs, outputs, verification, validation, and design transfer) across the product lifecycle.
  • Risk Management: Facilitate and lead risk management activities, including development of Risk Management Plans, Hazard Analysis, and Design Failure Mode Effects Analysis (DFMEA) for orthopedic products.
  • Verification & Validation (V&V): Approve design verification/validation plans, protocols, and reports to ensure compliance with product requirements, including mechanical testing, tolerance analysis, and anatomical lab testing.
  • Design Transfer: Ensure the successful transfer of new products to production by assisting in process validation requirements (IQ/OQ/PQ) and reviewing manufacturing documentation.
  • Technical Documentation & Audits: Review and approve Design History Files (DHF) and Device Master Records (DMR) for conformance. Support internal and 3rd party audits (FDA/Notified Body).
  • Post-Market Surveillance (PMS): Utilize post-market data and analytics to report on product performance in the field, providing feedback to R&D for continuous improvement.
  • Root Cause Analysis: Lead quality-related problem-solving and root cause investigations for design-related issues, complaints, and CAPAs.
  • Regulations: Strong understanding of FDA 21 CFR 820, ISO 13485, and ISO 14971.
  • Technical Skills: Knowledge of Geometric Dimensioning and Tolerancing (GD&T) and machining methodologies (titanium and stainless steel).
  • Tools: Proficient in statistical software tools (e.g., Minitab) for data analysis and risk analysis.



Preferred Skills

  • Certified Quality Engineer (CQE), Certified Six Sigma Green/Black Belt.
  • Experience with EU MDR regulatory submissions.
  • Experience with surgical instrumentation and/or implantable devices.


Core Competencies

  • Strong analytical, problem-solving, and critical thinking skills.
  • Effective communication and interpersonal skills to work within multi-disciplinary, cross-functional teams.
  • Detail-oriented with a focus on compliance and accuracy.



Pay and Benefits


Pay Range Minimum: $38.46 per hour

Pay Range Maximum: $47.00 per hour


HCL is an equal opportunity employer, committed to providing equal employment opportunities to all applicants and employees regardless of race, religion, sex, color, age, national origin, pregnancy, sexual orientation, physical disability or genetic information, military or veteran status, or any other protected classification, in accordance with federal, state, and/or local law. Should any applicant have concerns about discrimination in the hiring process, they should provide a detailed report of those concerns to for investigation.


Compensation and Benefits

A candidate’s pay within the range will depend on their work location, skills, experience, education, and other factors permitted by law. This role may also be eligible for performance-based bonuses subject to company policies. In addition, this role is eligible for the following benefits subject to company policies: medical, dental, vision, pharmacy, life, accidental death & dismemberment, and disability insurance; employee assistance program; 401(k) retirement plan; 10 days of paid time off per year (some positions are eligible for need-based leave with no designated number of leave days per year); and 10 paid holidays per year.


How You’ll Grow


At HCLTech, we offer continuous opportunities for you to find your spark and grow with us. We want you to be happy and satisfied with your role and to really learn what type of work sparks your brilliance the best. Throughout your time with us, we offer transparent communication with senior-level employees, learning and career development programs at every level, and opportunities to experiment in different roles or even pivot industries. We believe that you should be in control of your career with unlimited opportunities to find the role that fits you best.

Not Specified
Emergency Veterinary Technician, PERC
$24-28 Hourly Wage

Up to $2500 Sign-On Bonus Structure Available to Experienced Licensed Technicians!

Are you looking for an opportunity to utilize your full veterinary technician skill set while simultaneously learning new & advanced techniques? If so, Pet Emergency & Referral Center is looking to add YOU to their Emergency team!

Salary: $24.00 - $28.00 per hour based on experience
Schedule:

  • Full-Time, Fridays, Saturdays, and Sundays
  • 12 hour shifts, 8am - 8pm
  • Holidays and on-call rotation required. 
  • Weekend availability

Benefits:

  • 401(k)
  • Medical/Dental/Vision Insurance
  • Employee Pet discount (Very generous)
  • Paid time off and Parental leave
  • Flexible spending account
  • Referral program
  • And more!

Emergency Technician duties include, but are not limited to:

  • Triaging emergencies, phlebotomy, IV catheter placement, and nursing care of hospitalized patients
  • Performing in-house laboratory or diagnostic tests
  • Anesthetic induction, monitoring, and assisting with emergency and/or surgical procedures

The Ideal Candidate:

  • Minimum 3 years of previous Veterinary experience required, LVT or CVT preferred but not required 
  • Ability to Triage and Assess patients, and respond accordingly while critically thinking and maintaining a calm demeanor in stressful situations
  • Flexibility to work in different areas of the hospital (Cross Training)
  • Dependable, Knowledgeable, Experienced, Detail Oriented
  • Fluent English skills (speaking & reading) are required for the role; fluency in multiple languages a plus.

PERC in Palm Beach Gardens, Florida is a busy and growing 24-hour Emergency and Specialty hospital offering a fast-paced work environment. The Emergency service is staffed by seasoned Veterinarians to provide high quality medical care to our patients around the clock, while working within a culture of true teamwork and collaboration with the Specialty departments, who offer referral and continued care for critically ill patients.

We work hard to support a learning environment where everyone is encouraged to ask questions and learn from co-workers, clinicians, and specialists. Our team thrives in a fast-paced environment, allowing you to stay busy, excel at your duties, and making it an exciting place to be. We foster an environment where our technicians are utilized to their fullest ability and encouraged to continue their professional development.

For more information about our hospital, please visit our Pet Emergency and Referral Center homepage. 

Beach Gardens, FL

PM19

We are excited to announce Ethos Veterinary Health as our new name. Ethos is the new, industry-leading community of legacy Ethos Veterinary Health, Compassion-First Pet Hospitals, SAGE Veterinary Centers, and legacy NVA Specialty and Emergency hospitals. This powerful new community brings together a dynamic network of ~145 hospitals, an unmatched team of experts, cutting-edge technology, and an unwavering commitment to the advancement of the animal health profession and better patient outcomes.
Our commitments to the industry, the profession, our teammates, and our patients, will not change, and in fact will be stronger than ever, as we forge new ground as this new dynamic community.

Ethos Veterinary Health offers a comprehensive benefits program including medical, dental, vision, a 401k with employer match, and paid time off (including sick time) for all eligible employees.  The team can provide more information about compensation and benefits for your specific location during the process.  For positions based in Colorado, EVH provides eligible employees with paid sick and safe leave and public health emergency leave in accordance with the requirements of Colorado's Healthy Families and Workplaces Act.
 
Ethos Veterinary Health is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. Pursuant to the San Francisco Fair Chance Ordinance, Los Angeles Fair Chance Initiative for Hiring Ordinance, and any other state or local hiring regulations, we will consider for employment any qualified applicant, including those with arrest and conviction records, in a manner consistent with the applicable regulations.

Powered by JazzHR



Compensation details: 24-28 Hourly Wage



PIa11ae761748

permanent
Surgery Veterinary Technician, PERC
🏢 Ethos Veterinary Health
$25-30 Hourly Wage
Palm Beach Gardens, Florida 6 days ago

Up to $2500 Sign-On Bonus Structure Available to Experienced Licensed Technicians!

Are you a compassionate veterinary technician looking to utilize your skills to their full potential? Do you thrive in an environment where your contributions make a meaningful impact? If so, Pet Emergency & Referral Center is looking to add YOU as a Veterinary Technician to their Surgery team!

Certified and non-certified Veterinary technicians with surgery and anesthesia experience are strongly encouraged to apply.

Salary: $25.00 - $30.00 per hour based on experience

Schedule: Monday-Friday, three twelve hour shifts, participation in on-call rotation.

Benefits:

  • 401(k)
  • Medical/Dental/Vision Insurance
  • Employee Pet discount (Very generous)
  • Paid time off
  • Parental leave
  • Flexible spending account
  • Referral program
  • Vision insurance
  • And more!

About You: An experienced surgery veterinary technician that thrives on an ever changing ER/Specialty environment, with strong communication skills seeking a cohesive, hard-working team and committed to quality patient care. Equipped to stay calm and know how to react quickly during life threatening circumstances. Dedicated to outstanding client service and excellent patient care. You understand the importance of maintaining a positive, respectful, uplifting hospital culture and genuinely love working with people that share the same value. You can adapt to the individual needs of each patient, are eager to continue enhancing your skill set, and truly want to make a difference.

About the job: As a surgery and anesthesia technician, you will embark on a fulfilling journey where your skills make a real difference. Here’s what you can look forward to

  • Assist in managing cases, collaborating closely with our board-certified surgeons and highly skilled technicians.
  • Participate in patient assessment, diagnostics, treatments, and procedures alongside each surgeon.
  • Execute, monitor, and recover all assigned sedation and anesthetic events.
  • Assist in all operating room duties as a circulating nurse and scrub-in technician during orthopedic and soft tissue surgeries.
  • Provide empathy, comfort, and unparalleled nursing care to all patients, being a strong patient advocate during their hospitalization.
  • You are able to work well independently and in a team environment, leading by example and holding oneself accountable for quality medicine and customer service.
  • You exhibit flexibility, dependability, responsibility, and possess excellent attention to detail and time management skills.

Requirements:

  • Minimum of 3 years working as a veterinary technician, preferably in specialty medicine with a focus on surgery, specialty surgery, anesthesia, and emergency. LVT or CVT is preferred, but not required.
  • An understanding of all basic veterinary knowledge, including triage, restraint, diagnostic imaging, venipuncture, phlebotomy, laboratory equipment and procedures, etc.
  • Experience planning, monitoring, managing and recovering anesthesia patients for a variety of abdominal, thoracic, orthopedic, and minimally invasive procedures, surgical prepping and positioning. Knowledge of common surgical instruments and their uses and experience calculating and administering CRI medications appropriately.
  • Attention to detail, with strong communication skills with both clients and team members.
  • Fluent English skills (speaking & reading) are required for the role; fluency in multiple languages a plus.

At PERC we are proud to have an outstanding emergency care department alongside our teams of critical care, internal medicine, oncology, and surgery specialists who dedicate their energies and combined knowledge to the care of their patients and the support of their clients. Our team embodies our core principles of commitment, compassion, and competence towards our patients, clients, and our referring veterinary community. It is our goal to function as an integrated, collaborative team while providing the very best care for each patient, while balancing the needs and desires of our clients.

What sets PERC apart:

  • Collaborative environment: At PERC, diversity is celebrated, and our inclusive work environment fosters collaboration and learning. You’ll feel empowered to learn from experienced colleagues and seek guidance from a diverse range of clinicians and specialists.
  • Autonomy: You’ll have the opportunity for direct case oversight and manage alongside our surgeons. You’ll play a crucial role in providing care and treatment to patients from all specialty services.
  • Continuous Learning: Our commitment to education means you’ll have access to mentorship from senior technicians, opportunities for specialty credentials, and leadership development. We’re dedicated to supporting your journey to becoming the best veterinary professional you can be.

For more information about our hospital, please visit our Pet Emergency and Referral Center homepage at:  Beach Gardens, FL

 

We are excited to announce Ethos Veterinary Health as our new name. Ethos is the new, industry-leading community of legacy Ethos Veterinary Health, Compassion-First Pet Hospitals, SAGE Veterinary Centers, and legacy NVA Specialty and Emergency hospitals. This powerful new community brings together a dynamic network of ~145 hospitals, an unmatched team of experts, cutting-edge technology, and an unwavering commitment to the advancement of the animal health profession and better patient outcomes.
Our commitments to the industry, the profession, our teammates, and our patients, will not change, and in fact will be stronger than ever, as we forge new ground as this new dynamic community.

Ethos Veterinary Health offers a comprehensive benefits program including medical, dental, vision, a 401k with employer match, and paid time off (including sick time) for all eligible employees.  The team can provide more information about compensation and benefits for your specific location during the process.  For positions based in Colorado, EVH provides eligible employees with paid sick and safe leave and public health emergency leave in accordance with the requirements of Colorado's Healthy Families and Workplaces Act.
 
Ethos Veterinary Health is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. Pursuant to the San Francisco Fair Chance Ordinance, Los Angeles Fair Chance Initiative for Hiring Ordinance, and any other state or local hiring regulations, we will consider for employment any qualified applicant, including those with arrest and conviction records, in a manner consistent with the applicable regulations.

Tags: RVT, Registered Veterinary Technician, Registered Vet Tech, Registered Vet Technician, Registered Veterinary Tech, CVT, Certified Veterinary Technician, Certified Vet Tech, LVT, Licensed Veterinary Technician, Licensed Vet Tech, Credentialed Veterinary Technician, Credentialed Vet Tech, Credentialed Veterinary Tech, Veterinary Technician, Veterinary Tech, Vet Tech, Vet Technician, Veterinary Assistant, Vet Assistant, Technician Assistant, Tech Assistant, Kennel Assistant, Kennel Technician, Kennel Tech, Animal Assistant, Veterinary Nurse, Vet Nurse, PERC, Pet Emergency Referral Center, Ethos Vet, Ethos Veterinary Health, Palm Beach Gardens, FL, Florida

Powered by JazzHR



Compensation details: 25-30 Hourly Wage



PI3799eeb89e74-3631

permanent
Palm Beach's Top Hospital seeks another cardiologist for our 7 physician group in Jupiter, FL
✦ New
Salary not disclosed
Jupiter, FL 1 day ago

Jupiter Medical Center , the premier hospital in Palm Beach County and the Treasure Coast is seeking a board certified non-invasive cardiologist (with imaging experience a plus) to join our hospital employed group. Our multispecialty group, JMC Physician Group and our hospital are both in growth mode, and we seek to add an additional cardiologist to our current group, which has 7 cardiologists (2 interventional/structural heart, 1 EP, 1 invasive/non interventional, and 3 non-invasive cardiologists) and 2 cardiac surgeons.

This position:

  • Competitive Salary + sign on bonus, relocation allotment, quality bonus

  • Achievable WRVU productivity bonus

  • Shared call with the other cardiologists in the group

  • Part of a multispecialty group of over 75 other physicians, you'd be in an office with 3 other cardiologists and 3 advanced practice providers.

About Jupiter Medical Center

Highly-rated in quality, safety and patient experience, Jupiter Medical Center is the region's only independent not-for-profit health system. We are also the only 4 star CMS hospital and A rated Leapfrog hospital in the county.

Job Responsibilities

Inpatient and Outpatient, shared call with other physicians in our group.

Qualifications

BC/BE in Cardiology
Cardiac Imaging a plus

Working Hours

Monday through Friday normal business hours
shared call on weekends

email

Not Specified
Houseparents - Relocation to Hershey, PA Required
✦ New
Salary not disclosed
Riviera beach, FL 1 day ago
Description:
Located in Hershey, PA, Milton Hershey School (MHS) is a top-notch home and school where over 2,200 pre-K through 12th grade students from disadvantaged backgrounds are provided an extraordinary, cost-free, career-focused education. This is made possible by the generosity of Milton and Catherine Hershey, who established the school in 1909 and ensured it was fully endowed. Thanks to their foresight and generosity, the school has over 12,000 graduates and continues to expand to serve more students.
MHS is hiring married couples to serve as Full-time Flex Houseparents. In this unique and life-changing career, couples reside in on-campus student homes and provide care, guidance, supervision, and support for a group of approximately 8–13 students living in the home. Flex Houseparents play a vital role in creating a structured, family-like environment that fosters students’ academic, emotional, and social development so they can reach their full potential.
Responsibilities include:
Providing daily supervision and mentorship
Managing household routines and student schedules
Administering medications and ensuring student wellness
Driving students to activities, as well as planning and actively engaging in developmental and recreational activities with students
Leading daily devotions and accompanying students to Sunday Chapel
Overseeing budgeting and household reporting
Upon hire, Flex Houseparents initially support various student homes and follow a working schedule of nine consecutive days on duty, followed by three days off.
On weekdays, houseparents have unscheduled time while students are in school. Flex Houseparents eventually transition into a Placed Houseparent role, where they live and work with the same group of students in their own student home.
Benefits include:
Salary: $44,768.00 per person (approximately $168,000 total compensation per couple, including free housing, meals while on duty, utilities, and more)
Comprehensive benefits: medical, dental, and vision insurance; health savings and flexible spending accounts; life insurance; disability options; retirement savings
Relocation assistance and paid training provided
Paid time off provided at designated times throughout the year
Qualifications:
Qualifications include:
Experience working or volunteering with youth
This is a two-person role for couples legally married for at least two years
Both spouses must be age 27 or older
No more than three dependent children may reside in the student home
Commitment to a smoke-free and weapon-free campus; no alcohol permitted while on duty
Pet limitations: only fish and one dog of approved breeds allowed
Valid U.S. driver’s license and ability to become certified to drive student home vans
Comfort leading students in daily devotions and accompanying them to Judeo-Christian Sunday Chapel services (proselytizing prohibited)
High school diploma or GED required
Ability to lift to 50 lbs.
Demonstrated integrity and professionalism; MHS staff serve as role models for students
This is a unique, challenging, and rewarding career and life choice that requires a high level of commitment to student success from both spouses. For consideration, both spouses must complete individual employment applications. To learn more and apply, visit
.
Not Specified
Physician / Cardiology / Florida / Permanent / Non-Invasive Cardiology - Paradise Awaits in Palm Bea
Salary not disclosed
Jupiter, Florida 2 days ago
Enterprise Medical is interviewing Non-Invasive Cardiologists for Palm Beach County, FL .

The hospital is an independent, non-profit, A-rated medical center with an award-winning comprehensive heart & vascular institute.

Highlights: Join a group of 6 cardiologists (2 interventional,1 EP, one invasive, and two non-invasive) Full scope of non-invasive diagnostics Structural Heart and Open-heart programs, and 2 CT Surgeons State-of-the-art facilities Hospital is a 248-bed facility Compensation/Benefits: Compensation based on experience + achievable productivity bonus Sign-on bonus Relocation allowance 30 days of PTO 5K CME allowance plus 5 days Comprehensive benefits package Paid Malpractice About Jupiter, Florida: Jupiter is a picturesque coastal town renowned for its stunning beaches, natural landscapes, and warm, welcoming community.

This charming locale uniquely blends small-town charm and modern amenities in Palm Beach County.

Residents and visitors enjoy outdoor activities such as boating, fishing, and hiking, with highlights including the iconic Jupiter Inlet Lighthouse and the Blowing Rocks Preserve, which add to its allure.

The town boasts excellent schools, diverse dining options, and a thriving arts and cultural scene, making it a perfect destination for families, retirees, and adventure seekers.

With its sunny weather and relaxed yet upscale vibe, Jupiter captures the essence of coastal living.

LP-97
permanent
Nuclear Engineer
Salary not disclosed
Palm Beach Gardens, Florida 1 week ago

Job Title : Nuclear Engineer (Naval Reactors Engineer) Category / Component : Officer • Active Overview Design, regulate, and oversee the Navy's nuclear propulsion program, including reactor design, fleet operations, and eventual defueling and decommissioning of nuclear powered ships and submarines from Naval Reactors Headquarters and associated Department of Energy laboratories and shipyards.

Key Responsibilities Provide technical direction in areas such as reactor and fluid systems design, reactor physics, materials development, component design for steam generators, pumps, and valves, instrumentation and control for reactor and propulsion plants, testing and quality control, radiation shielding, and chemistry and radiological controls; review designs and analyses from laboratories, shipyards, and industry partners; coordinate with fleet units to ensure safe and reliable nuclear plant operation.

What to Expect Assume significant technical responsibility early in your career as part of a lean headquarters staff; work primarily in an analytical and oversight role rather than operating plants at sea; balance long term engineering projects with time sensitive fleet and shipyard issues; frequent coordination with senior civilian engineers, naval officers, and technical teams; high expectations for attention to detail, judgment, and written and oral communication.

Work Environment Work mainly at Naval Reactors Headquarters in the Washington, District of Columbia area with regular engagement with Department of Energy laboratories, nuclear training sites, shipyards, and nuclear powered ships and submarines; office based work that includes document reviews, technical meetings, inspections, and site visits rather than day to day shipboard watchstanding.

Pathways, Training & Advancement Officer commissioning through programs such as Officer Candidate School or the Nuclear Propulsion Officer Candidate program followed by a structured technical qualification program at Naval Reactors; rotational exposure to laboratories, prototypes, shipyards, and fleet support issues; progressive responsibility leading projects and becoming a subject matter expert, with opportunities for professional military education and advanced graduate study in technical fields.

Entry through the Nuclear Propulsion Officer Candidate program for qualified college students and recent graduates, or selection via Officer Candidate School for those who already hold qualifying degrees; all applicants must meet Nuclear Propulsion Program academic and technical screening standards in addition to general officer commissioning requirements.

Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy.

Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter.

Additional qualifications for this job may include: Completion of a rigorous technical degree in engineering, physics, mathematics, or a closely related field that includes strong backgrounds in calculus and physics; outstanding academic record, particularly in technical coursework; United States citizenship and eligibility for a high level security clearance; strong technical aptitude and comfort with detailed analytical work.

Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities.

Specific options depend on the Sailor's status, training, and current Navy policy.

Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options.

Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance.

Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed.

Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source.

Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community.

It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes.

Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.

Not Specified
Design Engineer – AI Enablement
Salary not disclosed
Jupiter, FL 1 week ago

Please Note: **No Third-Party or C2C Firms**

*Must be able to work in the United States without sponsorship*



We are searching for a Design Engineer – AI Enablement on behalf of our client. This is a 6-months contract assignment.(W-2) Early‑career engineering role focused on supporting capital design teams by embedding with engineers and helping apply AI to everyday engineering work (design packages, specifications, calculations support, technical bids, vendor input validation). This role accelerates adoption through hands‑on coaching and workflow standardization. It is not a design authority role.


Location: Jupiter, FL 33478

6-months contract assignment.(W-2)


Key Responsibilities

  • Work side‑by‑side with engineers on active design work to demonstrate practical AI use
  • Support creation of reusable prompts, templates, and bounded AI agents aligned to engineering workflows
  • Help translate successful use cases into repeatable team practices
  • Track and report adoption, agent development, and quality/rework indicators


Qualifications

  • Bachelor’s degree in Engineering preferred; equivalent experience supporting engineering design deliverables accepted
  • Familiarity with engineering documents and workflows in an industrial or regulated environment
  • Strong comfort with AI and digital productivity tools
  • Approachable, patient, and effective at coaching peers


Role Boundaries

- Does not assume engineering design authority, approvals, or signatures

- Responsible engineers and checkers retain all technical accountability



We are committed to transparency and equity in all of our people practices. The base salary range for this position, which is dependent upon experience, qualifications and skills, is estimated to be $40.00/hr. to $45.00/hr.


Equal Opportunity Employer including Veterans and Individuals with Disabilities

FL: Job# 19136

Not Specified
Principal Mechanical Integration Engineer - DCI Pipes, Frames and Structures (REMOTE)
Salary not disclosed
Kyle, Texas, Remote 4 days ago
Job Title : Principal Mechanical Design Engineer
Job Family : Mechanical Design Engineering
Organization : Data Center Infrastructure Team
Location : Remote* OR Austin, TX
*Requires up to 30% domestic and/or international travel (rare)

How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.

What will you do?

* Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
* Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
* Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
* Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
* Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
* Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
* Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
* Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
* Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
* Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
* Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
* Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
* Lead mechanical design reviews and contribute to cross-functional design validation efforts.
* Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
* Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
* Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
* Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
* Conduct root cause analysis and corrective actions for mechanical failures or field issues.
* Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
* Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
* May perform other duties and responsibilities as assigned

How will you get here?
Education :

* Bachelor's Degree in Mechanical Engineering or related engineering discipline.

Experience :

* 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
* Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
* Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
* Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
* Excellent communication and cross-functional collaboration skills

Knowledge, Skills, Abilities:

* Excellent interpersonal and communication skills
* Creative, self-motivated, accountable, and team-oriented
* Able to work independently with minimal oversight
* Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
* Skilled in writing reports, business correspondence, and procedural guides
* Effective at presenting information and responding to management, clients, and public queries
* Capable of influencing others and sharing best practices
* Comfortable working as part of a global team
* Capable of assessing projects, articulating risks, and developing project milestones
* Familiar with stage-gate processes in project lifecycle management (PLCM)
* Able to mentor less experienced engineers
* Ability to travel both domestically and internationally up to 30%

Preferred Qualifications:

* Master's Degree in Mechanical Engineering
* Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
* Active Professional Engineer (PE) license.
* Knowledge of regulatory and safety standards applicable to data center infrastructure.
* Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
permanent
Lead Mechanical Systems Engineer - Remote Structures and Integration (AUSTIN)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Mechanical Design Engineer

Job Family: Mechanical Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 30% domestic and/or international travel (rare)

How will you make an impact?

We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.

What will you do?

- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.

- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.

- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.

- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).

- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.

- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.

- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.

- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.

- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.

- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts

- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability

- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.

- Lead mechanical design reviews and contribute to cross-functional design validation efforts.

- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).

- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.

- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.

- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.

- Conduct root cause analysis and corrective actions for mechanical failures or field issues.

- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).

- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)

- May perform other duties and responsibilities as assigned

How will you get here?

Education:

- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.

Experience:

- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.

- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).

- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must

- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required

- Excellent communication and cross-functional collaboration skills

Knowledge, Skills, Abilities:

- Excellent interpersonal and communication skills

- Creative, self-motivated, accountable, and team-oriented

- Able to work independently with minimal oversight

- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations

- Skilled in writing reports, business correspondence, and procedural guides

- Effective at presenting information and responding to management, clients, and public queries

- Capable of influencing others and sharing best practices

- Comfortable working as part of a global team

- Capable of assessing projects, articulating risks, and developing project milestones

- Familiar with stage-gate processes in project lifecycle management (PLCM)

- Able to mentor less experienced engineers

- Ability to travel both domestically and internationally up to 30%

Preferred Qualifications: 

- Master’s Degree in Mechanical Engineering

- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.

- Active Professional Engineer (PE) license.

- Knowledge of regulatory and safety standards applicable to data center infrastructure.

- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
temporary
Principal Mechanical Integration Engineer – DCI Pipes, Frames and Structures (REMOTE) (AUSTIN)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
AUSTIN, Texas, Remote 4 days ago
Job Title: Principal Mechanical Design Engineer

Job Family: Mechanical Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact?

We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.

What will you do?

- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.

- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.

- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.

- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).

- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.

- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.

- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.

- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.

- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.

- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts

- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability

- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.

- Lead mechanical design reviews and contribute to cross-functional design validation efforts.

- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).

- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.

- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.

- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.

- Conduct root cause analysis and corrective actions for mechanical failures or field issues.

- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).

- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)

- May perform other duties and responsibilities as assigned

How will you get here?

Education:

- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.

Experience:

- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.

- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).

- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must

- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required

- Excellent communication and cross-functional collaboration skills

Knowledge, Skills, Abilities:

- Excellent interpersonal and communication skills

- Creative, self-motivated, accountable, and team-oriented

- Able to work independently with minimal oversight

- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations

- Skilled in writing reports, business correspondence, and procedural guides

- Effective at presenting information and responding to management, clients, and public queries

- Capable of influencing others and sharing best practices

- Comfortable working as part of a global team

- Capable of assessing projects, articulating risks, and developing project milestones

- Familiar with stage-gate processes in project lifecycle management (PLCM)

- Able to mentor less experienced engineers

- Ability to travel both domestically and internationally up to 30%

Preferred Qualifications: 

- Master’s Degree in Mechanical Engineering

- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.

- Active Professional Engineer (PE) license.

- Knowledge of regulatory and safety standards applicable to data center infrastructure.

- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
temporary
Senior Mechanical Systems Engineer - Remote Structures and Piping (AUSTIN)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
AUSTIN, Texas, Remote 4 days ago
Job Title: Principal Mechanical Design Engineer

Job Family: Mechanical Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact?

We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.

What will you do?

- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.

- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.

- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.

- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).

- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.

- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.

- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.

- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.

- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.

- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts

- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability

- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.

- Lead mechanical design reviews and contribute to cross-functional design validation efforts.

- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).

- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.

- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.

- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.

- Conduct root cause analysis and corrective actions for mechanical failures or field issues.

- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).

- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)

- May perform other duties and responsibilities as assigned

How will you get here?

Education:

- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.

Experience:

- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.

- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).

- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must

- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required

- Excellent communication and cross-functional collaboration skills

Knowledge, Skills, Abilities:

- Excellent interpersonal and communication skills

- Creative, self-motivated, accountable, and team-oriented

- Able to work independently with minimal oversight

- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations

- Skilled in writing reports, business correspondence, and procedural guides

- Effective at presenting information and responding to management, clients, and public queries

- Capable of influencing others and sharing best practices

- Comfortable working as part of a global team

- Capable of assessing projects, articulating risks, and developing project milestones

- Familiar with stage-gate processes in project lifecycle management (PLCM)

- Able to mentor less experienced engineers

- Ability to travel both domestically and internationally up to 30%

Preferred Qualifications: 

- Master’s Degree in Mechanical Engineering

- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.

- Active Professional Engineer (PE) license.

- Knowledge of regulatory and safety standards applicable to data center infrastructure.

- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
temporary
Principal Mechanical Integration Engineer – DCI Pipes, Frames and Structures (REMOTE) (WASHINGTON)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Mechanical Design Engineer

Job Family: Mechanical Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact?

We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.

What will you do?

- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.

- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.

- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.

- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).

- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.

- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.

- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.

- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.

- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.

- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts

- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability

- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.

- Lead mechanical design reviews and contribute to cross-functional design validation efforts.

- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).

- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.

- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.

- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.

- Conduct root cause analysis and corrective actions for mechanical failures or field issues.

- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).

- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)

- May perform other duties and responsibilities as assigned

How will you get here?

Education:

- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.

Experience:

- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.

- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).

- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must

- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required

- Excellent communication and cross-functional collaboration skills

Knowledge, Skills, Abilities:

- Excellent interpersonal and communication skills

- Creative, self-motivated, accountable, and team-oriented

- Able to work independently with minimal oversight

- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations

- Skilled in writing reports, business correspondence, and procedural guides

- Effective at presenting information and responding to management, clients, and public queries

- Capable of influencing others and sharing best practices

- Comfortable working as part of a global team

- Capable of assessing projects, articulating risks, and developing project milestones

- Familiar with stage-gate processes in project lifecycle management (PLCM)

- Able to mentor less experienced engineers

- Ability to travel both domestically and internationally up to 30%

Preferred Qualifications: 

- Master’s Degree in Mechanical Engineering

- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.

- Active Professional Engineer (PE) license.

- Knowledge of regulatory and safety standards applicable to data center infrastructure.

- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
temporary
Principal Mechanical Integration Engineer – DCI Pipes, Frames and Structures (REMOTE) - Cutting-edge Data Center Projects (WASHINGTON)
✦ New
🏢 JABIL CIRCUIT, INC
Salary not disclosed
WASHINGTON, District of Columbia, Remote 1 day ago
Job Title: Principal Mechanical Design Engineer

Job Family: Mechanical Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact?

We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.

What will you do?

- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.

- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.

- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.

- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).

- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.

- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.

- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.

- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.

- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.

- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts

- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability

- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.

- Lead mechanical design reviews and contribute to cross-functional design validation efforts.

- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).

- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.

- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.

- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.

- Conduct root cause analysis and corrective actions for mechanical failures or field issues.

- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).

- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)

- May perform other duties and responsibilities as assigned

How will you get here?

Education:

- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.

Experience:

- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.

- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).

- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must

- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required

- Excellent communication and cross-functional collaboration skills

Knowledge, Skills, Abilities:

- Excellent interpersonal and communication skills

- Creative, self-motivated, accountable, and team-oriented

- Able to work independently with minimal oversight

- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations

- Skilled in writing reports, business correspondence, and procedural guides

- Effective at presenting information and responding to management, clients, and public queries

- Capable of influencing others and sharing best practices

- Comfortable working as part of a global team

- Capable of assessing projects, articulating risks, and developing project milestones

- Familiar with stage-gate processes in project lifecycle management (PLCM)

- Able to mentor less experienced engineers

- Ability to travel both domestically and internationally up to 30%

Preferred Qualifications: 

- Master’s Degree in Mechanical Engineering

- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.

- Active Professional Engineer (PE) license.

- Knowledge of regulatory and safety standards applicable to data center infrastructure.

- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
temporary
Principal Mechanical Integration Engineer – DCI Pipes, Frames and Structures (REMOTE)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Mechanical Design Engineer

Job Family: Mechanical Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact?

We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.

What will you do?

- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.

- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.

- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.

- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).

- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.

- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.

- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.

- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.

- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.

- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts

- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability

- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.

- Lead mechanical design reviews and contribute to cross-functional design validation efforts.

- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).

- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.

- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.

- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.

- Conduct root cause analysis and corrective actions for mechanical failures or field issues.

- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).

- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)

- May perform other duties and responsibilities as assigned

How will you get here?

Education:

- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.

Experience:

- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.

- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).

- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must

- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required

- Excellent communication and cross-functional collaboration skills

Knowledge, Skills, Abilities:

- Excellent interpersonal and communication skills

- Creative, self-motivated, accountable, and team-oriented

- Able to work independently with minimal oversight

- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations

- Skilled in writing reports, business correspondence, and procedural guides

- Effective at presenting information and responding to management, clients, and public queries

- Capable of influencing others and sharing best practices

- Comfortable working as part of a global team

- Capable of assessing projects, articulating risks, and developing project milestones

- Familiar with stage-gate processes in project lifecycle management (PLCM)

- Able to mentor less experienced engineers

- Ability to travel both domestically and internationally up to 30%

Preferred Qualifications: 

- Master’s Degree in Mechanical Engineering

- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.

- Active Professional Engineer (PE) license.

- Knowledge of regulatory and safety standards applicable to data center infrastructure.

- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
permanent
REO Resiliency Engineering and Quality Leader (Hybrid)
✦ New
Salary not disclosed

*At Securian Financial the internal position title is Infrastructure Dir."

Mission

"To lead the engineering discipline that ensures Securian's technology platforms and cloud services are built and operated with uncompromising resilience, performance, and quality. This role drives the design and automation of fault-tolerant, high-availability architectures across AWS, Azure, and GCP-ensuring the enterprise meets resiliency, scalability, and efficiency expectations at every layer of technology."

Positioning

The Director of Resilience Engineering and Quality Leader is both a strategic peer and technical counterpart to the Infrastructure & Reliability Engineering Leader.

This role provides bench depth and succession coverage for REO's most technically complex domains while driving innovation in reliability, resilience, and performance practices.

  • Strategic influence: Shapes cloud reliability, quality engineering, and resilience strategy across REO and Architecture domains.

  • Operational authority: Leads Sr. Managers and Managers who own the execution of quality, resilience, and performance engineering capabilities.

  • Enterprise collaboration: Works hand-in-hand with Technology, Solution, Business, Data, and Enterprise Architects to embed reliability and resilience as core architecture principles.

Scope of Accountability

Resilience Engineering & Cloud Reliability

  • Architect and validate fault-tolerant, regionally resilient architectures across AWS, Azure, and GCP.

  • Own resilience automation, chaos testing, and IaC-based recovery validation.

  • Lead cross-cloud reliability design reviews and failure-mode analyses for critical systems.

Quality Engineering & Continuous Testing

  • Define enterprise-wide quality engineering strategy integrated into CI/CD pipelines.

  • Drive automation-first testing (functional, non-functional, performance, resilience).

  • Embed observability-driven quality validation and contract testing across services.

Performance, Capacity & Efficiency Engineering

  • Oversee predictive capacity planning, scaling automation, and cost/efficiency optimization (FinOps/GreenOps).

  • Partner with Platform & Infrastructure teams to tune performance across application and platform layers.

  • Measure and report on performance SLIs/SLAs aligned to REO's Reliability Metrics framework.

Cross-Domain Architecture Collaboration

  • Partner with Enterprise Architects to codify resilience and reliability standards in technology blueprints.

  • Collaborate with Technology & Solution Architects to design service reliability into delivery architectures.

  • Engage Data Architects for data resilience, replication, and pipeline reliability.

  • Work with Business Architects to align technical reliability goals with critical business outcomes.

Leadership & Talent Development

  • Lead a team of Sr. Managers and Managers, fostering a high-performance, hands-on engineering culture.

  • Build and mentor top-tier technical talent in cloud reliability, resilience, and quality automation.

  • Partner with HR and REO Enablement to develop succession plans and technical competency frameworks.

Core Technical Competencies

  • AWS (primary) - Multi-account design, HA architecture, region failover, resilience automation, Terraform/CDK/CloudFormation.

  • Azure & GCP (secondary) - Compute, networking, and reliability constructs; hybrid cloud design and failover integration.

  • Infrastructure as Code (IaC) - Deep proficiency in Terraform, policy-as-code (OPA/Conftest), drift detection, pipeline integration.

  • Reliability & Chaos Engineering - AWS Fault Injection Simulator, Gremlin, steady-state hypothesis design.

  • Observability & Quality Automation - OpenTelemetry, Prometheus, CloudWatch, K6, Gatling; CI/CD quality gates and dashboards.

  • Performance Engineering - Load, stress, and soak testing automation; performance profiling and SLO alignment.

  • Disaster Recovery Automation - Cross-region orchestration, IaC-driven DR runs, replication validation.

  • FinOps/GreenOps - Cloud cost and efficiency automation, carbon-aware scaling policies.

Leadership Competencies

  • Strategic Technical Leadership: Operates at the intersection of deep engineering and executive strategy.

  • Multi-Domain Collaborator: Integrates reliability and resilience across architecture, operations, and business domains.

  • Talent Multiplier: Develops and empowers senior managers, fostering engineering mastery and innovation.

  • Credible Technical Authority: Trusted peer to Infrastructure & Reliability Engineering; capable of leading architecture reviews and executive briefings.

  • Change Champion: Drives transformation of reliability practices across platforms, pipelines, and teams.

Qualifications & Experience

  • 12+ years in cloud engineering, reliability, or platform leadership roles.

  • 5+ years leading Sr. Managers/Managers in technical domains.

  • Proven expertise across AWS, with working knowledge of Azure and GCP.

  • Experience with multi-cloud governance, DR design, IaC at scale, and reliability automation.

  • Strong understanding of observability, SRE principles, and REO/ITIL-aligned reliability frameworks.

  • Certifications:

    • Required: AWS Certified Solutions Architect - Professional

    • Preferred: AWS DevOps Engineer, Azure Solutions Architect Expert, Google Professional Cloud Architect

Success Metrics

  • 99.9% availability maintained for Tier-1 workloads.

  • 100% coverage of DR automation for Tier-1 services.

  • 25% annual increase in automated quality/test coverage.

  • 15% annual improvement in resource efficiency and cost performance.

  • Documented resilience participation across all enterprise architecture blueprints.

  • Positive "technical peer readiness" and succession rating from Head of REO.

Summary Value Proposition

This Director role blends deep AWS reliability engineering expertise, multi-cloud technical breadth, and leadership scale.

It ensures REO maintains both technical depth and leadership redundancy, and it strengthens the bridge between engineering execution and enterprise architecture alignment.

#LI-hybrid **This position will be in a hybrid working arrangement.**


Securian Financial believes in hybrid work as an integral part of our culture. Associates get the benefit of working both virtually and in our offices. If you're in a commutable distance (90 minutes), you'll join us 3 days each week in our offices to collaborate and build relationships. Our policy allows flexibility for the reality of business and personal schedules.

The estimated base pay range for this job is:

$145,000.00 - $267,000.00

Pay may vary depending on job-related factors and individual experience, skills, knowledge, etc. More information on base pay and incentive pay (if applicable) can be discussed with a member of the Securian Financial Talent Acquisition team.

Be you. With us. At Securian Financial, we understand that attracting top talent means offering more than just a job - it means providing a rewarding and fulfilling career. As a valued member of our high-performing team, we want you to connect with your work, your relationships and your community. Enjoy our comprehensive range of benefits designed to enhance your professional growth, well-being and work-life balance, including the advantages listed here:

Paid time off:

  • We want you to take time off for what matters most to you. Our PTO program provides flexibility for associates to take meaningful time away from work to relax, recharge and spend time doing what's important to them. And Securian Financial rewards associates for their service by providing additional PTO the longer you stay at Securian.

  • Leave programs: Securian's flexible leave programs allow time off from work for parental leave, caregiver leave for family members, bereavement and military leave.

  • Holidays: Securian provides nine company paid holidays.

Company-funded pension plan and a 401(k) retirement plan: Share in the success of our company. Securian's 401(k) company contribution is tied to our performance up to 10 percent of eligible earnings, with a target of 5 percent. The amount is based on company results compared to goals related to earnings, sales and service.

Health insurance: From the first day of employment, associates and their eligible family members - including spouses, domestic partners and children - are eligible for medical, dental and vision coverage.

Volunteer time: We know the importance of community. Through company-sponsored events, volunteer paid time off, a dollar-for-dollar matching gift program and more, we encourage you to support organizations important to you.

Associate Resource Groups: Build connections, be yourself and develop meaningful relationships at work through associate-led ARGs. Dedicated groups focus on a variety of interests and affinities, including:

  • Mental Wellness and Disability

  • Pride at Securian Financial

  • Securian Young Professionals Network

  • Securian Multicultural Network

  • Securian Women and Allies Network

  • Servicemember Associate Resource Group

For more information regarding Securian's benefits, please review our Benefits page.

This information is not intended to explain all the provisions of coverage available under these plans. In all cases, the plan document dictates coverage and provisions.

Securian Financial Group, Inc. does not discriminate based on race, color, religion, national origin, sex, gender, gender identity, sexual orientation, age, marital or familial status, pregnancy, disability, genetic information, political affiliation, veteran status, status in regard to public assistance or any other protected status. If you are a job seeker with a disability and require an accommodation to apply for one of our jobs, please contact us by email at , by telephone (voice), or 711 (Relay/TTY).

To view our privacy statement click here

To view our legal statement click here


Remote working/work at home options are available for this role.
Not Specified
Principal Mechanical Integration Engineer – DCI Pipes, Frames and Structures (REMOTE) - Collaborative Remote Work Environment (WASHINGTON)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
WASHINGTON, District of Columbia, Remote 4 days ago
Job Title: Principal Mechanical Design Engineer

Job Family: Mechanical Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 30% domestic and/or international travel (rare)

How will you make an impact?

We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.

What will you do?

- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.

- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.

- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.

- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).

- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.

- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.

- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.

- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.

- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.

- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts

- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability

- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.

- Lead mechanical design reviews and contribute to cross-functional design validation efforts.

- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).

- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.

- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.

- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.

- Conduct root cause analysis and corrective actions for mechanical failures or field issues.

- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).

- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)

- May perform other duties and responsibilities as assigned

How will you get here?

Education:

- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.

Experience:

- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.

- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).

- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must

- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required

- Excellent communication and cross-functional collaboration skills

Knowledge, Skills, Abilities:

- Excellent interpersonal and communication skills

- Creative, self-motivated, accountable, and team-oriented

- Able to work independently with minimal oversight

- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations

- Skilled in writing reports, business correspondence, and procedural guides

- Effective at presenting information and responding to management, clients, and public queries

- Capable of influencing others and sharing best practices

- Comfortable working as part of a global team

- Capable of assessing projects, articulating risks, and developing project milestones

- Familiar with stage-gate processes in project lifecycle management (PLCM)

- Able to mentor less experienced engineers

- Ability to travel both domestically and internationally up to 30%

Preferred Qualifications: 

- Master’s Degree in Mechanical Engineering

- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.

- Active Professional Engineer (PE) license.

- Knowledge of regulatory and safety standards applicable to data center infrastructure.

- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
temporary
Lead Structural System Designer – Remote (Pipes and Frames) (WASHINGTON)
🏢 JABIL CIRCUIT, INC
$132,400 - 238,400
WASHINGTON, District of Columbia, Remote 4 days ago
Job Title: Principal Mechanical Design Engineer

Job Family: Mechanical Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact?

We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.

What will you do?

- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.

- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.

- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.

- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).

- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.

- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.

- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.

- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.

- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.

- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts

- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability

- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.

- Lead mechanical design reviews and contribute to cross-functional design validation efforts.

- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).

- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.

- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.

- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.

- Conduct root cause analysis and corrective actions for mechanical failures or field issues.

- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).

- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)

- May perform other duties and responsibilities as assigned

How will you get here?

Education:

- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.

Experience:

- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.

- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).

- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must

- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required

- Excellent communication and cross-functional collaboration skills

Knowledge, Skills, Abilities:

- Excellent interpersonal and communication skills

- Creative, self-motivated, accountable, and team-oriented

- Able to work independently with minimal oversight

- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations

- Skilled in writing reports, business correspondence, and procedural guides

- Effective at presenting information and responding to management, clients, and public queries

- Capable of influencing others and sharing best practices

- Comfortable working as part of a global team

- Capable of assessing projects, articulating risks, and developing project milestones

- Familiar with stage-gate processes in project lifecycle management (PLCM)

- Able to mentor less experienced engineers

- Ability to travel both domestically and internationally up to 30%

Preferred Qualifications: 

- Master’s Degree in Mechanical Engineering

- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.

- Active Professional Engineer (PE) license.

- Knowledge of regulatory and safety standards applicable to data center infrastructure.

- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
temporary
jobs by JobLookup