Engineering Structures Jobs in Herndon, VA

Great American Restaurants is seeking an experienced Director of Construction Development to join our growing construction team. This on-site role is based out of our support center office in Fairfax, Virginia, with frequent on-site work expected at all new and existing locations. Established in 1974, Great American Restaurants operates thirteen high-volume, upper casual restaurants, an upscale dining location, three artisan bakeries, and a fast-casual BBQ joint in Northern Virginia and Maryland.

With several new locations in progress and more in the works, this new role will contribute to all aspects of the construction and development process, with a strong focus on design and planning.

Key Responsibilities

• Collaborate with architects, engineers, kitchen designers, general contractors, vendors, and internal stakeholders to deliver ground-up builds and major remodels on time and within budget.
• Apply strong technical expertise in construction processes and building design, working with architects, engineers, and trades to build complex, high-quality restaurant environments.
• Review and validate architectural and MEP plans. Identify and address issues prior to mobilization.
• Implement permitting strategy with authorities having jurisdiction (AHJs).
• Partner with internal construction and operations teams to execute facility improvement projects efficiently and effectively.

Minimum Requirements

• Bachelor’s degree in Architecture, Engineering, Construction Management, or related field
• 5+ years of progressively responsible construction project management (hospitality projects preferred)
• Experience managing $10M+ projects
• Knowledge and understanding of restaurant construction processes, food service equipment, facilities management, mechanical systems and procedures, building and health codes, and other applicable regulatory requirements

Why You’ll Love Working Here

• Competitive base salary
• 3 weeks Paid Time Off (PTO) to start plus 6 additional holidays
• Medical, Dental, Vision, Long-Term Disability and Life Insurance
• 401(k) with generous employer match
• Monthly dining card
• Gym and educational reimbursement

Responsibilities:

· Perform failure analysis of materials/hardware to determine the root cause of failure and identify failure modes.

· Perform materials analysis and characterization.

· Perform weld joint analysis.

· Perform materials testing per industry standard specifications and internal requirements.

· Perform inspection of printed wiring board for defects and anomalies.

· Use analytical tools and equipment to inspect and analyze parts, materials, and flight hardware.

Basic Qualifications for Systems Engineer - Integration and Test:

· Bachelor's degree in Materials Engineering. Bachelor’s degree is Physics with some background in materials is acceptable.

· Knowledge and experience with lab equipment, such as, scanning electron microscope, optical microscope, spectroscopy, x-ray equipment.

Preferred Qualifications for Systems Engineer - Integration and Test:

· Familiarity with materials, such as, aluminum, titanium, steel.

· Familiarity with processes, such as, rolling, forging, heat treatment, welding, corrosion.

· Familiarity with industry standard documents, e.g., ASTM, ASM, NASA, MIL.

• Review RFPs/RFIs/RFQs to develop proposal plans, kickoff materials, and response strategies.
• Develop proposal outlines, compliance matrices, proposal schedules, and task assignments.
• Coordinate and facilitate proposal reviews to verify compliance with solicitation instructions, evaluation criteria, and formatting requirements.
• Interview with SMEs to gather technical, programmatic, and operational information.
• Write and edit major proposal sections, including executive summaries, technical volumes, management approaches, past performance, qualifications, and resumes.
• Translate complex technical information into clear, user friendly narrative tailored for federal evaluators. friendly narrative tailored for federal evaluators.
• Review and rewrite proposal inputs to improve quality, accuracy, and alignment with win themes.
• Edit proposals for completeness, clarity, organization, readability, and editorial consistency.
• Ensure all content adheres to solicitation of instructions, federal standards, internal templates, and style guidelines.
• Develop and maintain proposal libraries, templates, style guides, and past performance repositories.
• Maintain a comprehensive inventory of opportunities-current, historical, and planned.
• Keep contract matrices, past performance information, and boilerplate content up to date.
• Provide documentation support for internal policies, technical documents, and corporate procedures, including software development and network processes.
• Select and develop graphics, illustrations, and layouts that enhance proposal readability and impact.
• Support the creation of materials for technical seminars, leadership briefings, and proposal related presentation.
• Maintain subject matter expertise through continuous learning, participation in professional development opportunities, and networking. matter expertise through continuous learning, participation in professional development opportunities, and networking.
• Ensure quality results by following proposal writing standards, templates, compliance tools, and best practices for readability and tone.

• 6 to 8 years of commensurate experience with a Masters degree or 8 to 10 years of commensurate experience with a Bachelors degree or equivalent.
• Must have hands on experience performing compliance checks across all volumes, attachments, and required forms.
• Must have experience reviewing RFPs/RFIs/RFQs to develop proposal plans, kickoff materials, and response strategies.
• Strong understanding of federal procurement, including FAR, Section L/M compliance, and technical volume development.
• Knowledge of selecting and developing graphics, illustrations, and layouts that enhance proposal readability and impact.
• Experience supporting federal contracting, IT services, professional services, or HR/shared services.
• Demonstrated ability to synthesize information, write persuasively, and work under tight deadlines.
• Proficiency with MS Office, SharePoint, Adobe Acrobat, and common proposal collaboration tools.
• Ability to coordinate inputs from SMEs and manage multiple proposals simultaneously.

• 
  
• REQUIRED: NetSuite experience
  
• PREFERRED: Ability to work with multiple levels within the organization to document and collect requirements and then translate these requirements into intuitive, actionable reporting solutions through NetSuite Analytics Warehouse (NSAW).
  
• Create standards for reporting, dashboards, and visualization solutions.
  
• Creates reusable data models that are aligned to governance and department standards.
  
• Document business definitions, data logic and repot specifications.
  
• Create standards around change management for data models and NSAW.
  
• Validate and ensure data accuracy, consistency and reliability across all data models and reporting.
  
• Create documentation, hands on training and recorded training to increase end user acceptance and engagement.
  
• Other duties as assigned.
  

• 
  
• Bachelor's degree in computer information systems, or related field.
  
• 5-10 years hands on experience.
  
• Experience with Power BI, Tableau, NetSuite Analytics Warehouse, or other major Business Intelligence Tools.
  
• Transforming complex enterprise data into usable models, and visual designs for end users.
  
• Effective analytical thinking and problem-solving skills, with ability to translate business questions into analytical requirements
  
• Effective communication skills for partnering with non-technical stakeholders and document, validate and provide quality assurance skills.
  
• Must be a US Citizen
  
• Excellent verbal and written communication skills.
  

• 
  
• Proficient in Microsoft Office Suite or related software.
  
• Excellent organizational skills and attention to detail.
  
• Excellent interpersonal skills.
  

• 
  
• Microsoft Office Suite or related software.
  

• 
  
• No supervisory responsibilities for this position.
  

• 
  
• Prolonged periods of sitting at a desk and working on a computer.
  
• Must be able to lift 15 pounds at times.
  
• Frequently required to stand, walk, stoop, kneel, crouch, or crawl.
  

• 
  
• Health Benefits - (Medical, Dental & Vision Insurance)
  
• Flexible Spending Account Options
  
• 401K Plan
  
• Employer paid Life & Disability Insurance
  
• Paid Time Off
  
• Employee Referral Program
  
• Employee Assistance Program (EAP)
  

• 
  
• Estimate and scope MEP trades during pre-construction (as applicable / future support)
  
• Review Contract Documents, making suggestions/modifications as they relate to the MEP trades and approved construction drawings and specifications
  
• Review BOD for MEP compliance
  
• Review and coordination of submittals and shop drawings
  
• Act as Energy Marshall in the isolation and energization of all electrical equipment in accordance with the safety plan.
  
• Assist Superintendent and Field Staff in managing MEP subcontractors throughout duration of the project (from groundbreaking through commissioning and turnover to owner)
  
• Assist with scheduling MEP installation activities.
  
• Review, inspect, and provide oversight of construction drawings during MEP installation
  
• Work with Superintendent on project logistics and temporary facility plans
  
• Review and comment on scope, material, and equipment for MEP systems prior to installation
  
• Monitor the installation and start-up of MEP systems and commissioning of project with Engineer & Owner
  
• Inspect MEP installation during construction.
  
• Review Coordination and Arc Flash studies
  
• Review and provide field verification of torque and meggar reports provide by trades, and assure reports are submitted during final turnover.
  
• Coordinate activities, materials procurement and other related activities with Project Superintendent and Field Staff
  
• Communicate progress and prepare appropriate reports as needed (Procore)
  
• Represent SE MCS regarding the MEP process at weekly Owners and contractors' meetings.
  
• Mentor project staff, if applicable
  
• Lead and direct the coordination process to resolve all conflicts during installations and start-up
  
• Perform other duties as assigned.
  
• Schedule shifts may incl nights/weekends as per bell curve requirements
  
• Significant travel required for this role - 50% (rotating two or three weeks on project site and one week working remote)
  

• 
  
• Bachelor's/Associates Degree a plus or comparable experience in mechanical, electrical or fire protection/life safety engineering, construction management.
  
• Construction trade specific experience with increasing levels of responsibility and demonstrated abilities to direct the work of others.
  

• 
  
• Proficient in Microsoft Office or related software, Procore preferred.
  

• 
  
• Supervises subordinate employees. Carries out supervisory responsibilities in accordance with the organization's policies and applicable laws. Responsibilities include interviewing, hiring, and training employees; planning, assigning, and directing work; appraising performance; rewarding and disciplining employees; addressing complaints and resolving problems.
  
• Occasionally lift and/or move up to 25 pounds, and ability to bend, stoop, kneel, crouch, or crawl. Frequent use of hands to fingers, and ability to reach with hands and arms. Specific vision abilities required include close vision, ability to adjust focus, and ability to see color. Requires eye-hand coordination and manual dexterity sufficient to operate office equipment. Requires normal range of hearing and eyesight to record, prepare and communicate written or online documentation. Involves contact with other individuals. Frequent sitting, standing, and walking. Work is performed primarily indoors.
  

• 
  
• No supervisory responsibilities
  

• 
  
• While performing the duties of this job, the employee is regularly required to sit; Standing and walking is required. The noise level in the work environment is usually moderate. The employee must occasionally lift and carry up to 50 pounds.
  

Benefits to Joining Our Team

CPG offers a competitive and comprehensive package that includes additional benefits beyond enhanced medical, dental, and vision coverage

• 
  
• Health Benefits - (Medical, Dental & Vision Insurance)
  
• Flexible Spending Account Options
  
• 401K Plan
  
• Employer paid Life & Disability Insurance
  
• Paid Time Off
  
• Employee Referral Program
  
• Employee Assistance Program (EAP)
  

CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.

Learn more about CPG by checking out our website here

#LI-TG1

Benefits to Joining Our Team

CPG offers a competitive and comprehensive package that includes additional benefits beyond enhanced medical, dental, and vision coverage

• 
  
• Health Benefits - (Medical, Dental & Vision Insurance)
  
• Flexible Spending Account Options
  
• 401K Plan
  
• Employer paid Life & Disability Insurance
  
• Paid Time Off
  
• Employee Referral Program
  
• Employee Assistance Program (EAP)
  

CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.

Learn more about CPG by checking out our website here

#LI-TG1

• 
  
• Review and understand RFP/RFQ documents from customers and supports request for information (RFI) process as it pertains to the low voltage and related WSFO items of the projects.
  
• Identify project risks and/or challenges as part of solutioning process.
  
• Assist in generation of rough order of magnitude and/or formal estimates for potential projects pertaining to LV efforts or LV portions of larger efforts.
  
• Assist in proposal development of the deliverable.
  
• Maintain a well organize database of bid documents for reference upon award of contract to manage the kickoff process with the PreCon Manager.
  
• Identify additional revenue opportunities for CPG, as applicable.
  
• Coordinate with personnel from sales, engineering, preconstruction, execution, and finance teams.
  
• Collect different quotes from subcontractors, vendors, and suppliers pertaining to the task at hand.
  
• Review and assess cost estimates.
  
• Identify labor, material, costs, and time requirements by researching proposals, blueprints, and any related documents.
  
• Comfortable making site visits and documenting the data for distribution to the CPG team.
  
• 50% travel for local candidates within the NOVA area. 5% outside NOVA.
  
• Create shop drawings and other related documentation for potential change orders during project execution.
  
• Assist estimation and procurement teams to ensure correct material orders and project pricing.
  
• Perform site walks to assist the estimation team in properly pricing material and labor for new opportunities.
  

• 
  
• 5-10 years of LV installation/Estimation and on-site project management preferred.
  
• 2+ years of experience in construction estimating, with specific knowledge of mission critical systems
  
• 2+ years of data center experience relating to batteries, UPS replacements and general maintenance required in a mission critical environment is preferred
  
• Electrical estimating is a plus
  
• Ability to interpret contract terms, conditions, and exhibits as applicable to project requirements
  
• Strong interpersonal skills and the ability to work both independently and in a team environment
  
• Excellent organizational and problem-solving skills
  
• Demonstrated experience developing and justifying budgets
  
• Ability to create and maintain processes for project documentation
  
• Ability and willingness to think outside of the box to find creative and innovative solutions prior to and during the construction process to reduce costs with no impact on quality and reliability
  
• Possess excellent communication skills, attention to detail, and be able to maintain high-quality standards
  
• Proficient with Microsoft Office Suite. On Screen Take Off or Bluebeam, Building Connected or Accubid or RS Means preferred.
  
• Must be a US Citizen
  
• 10% travel
  

• 
  
• Windows power user skill set, proficient with Microsoft Office Suite, and estimating software such as Accubid, RS Means, On Screen Take Off, Bluebeam, AutoCAD. Fluke/Viavi and other assorted Fiber testing equipment, Fluke LinkWare, Viavi J-Reporter and/or other Testing platform software's. Fujikura, Sumitomo and/or similar splicing tools and software's.
  
• Procore Software for vendor management.
  

• 
  
• None
  

• 
  
• No supervisory requirements for this role
  

• 
  
• Prolonged periods of sitting at a desk or working on a computer. Must be able to lift up to 15-50 pounds at a time. May be required to walk around facility. Can safely work from a 12' ladder, as well as safely operate and work from a lift to greater heights. Need to be able to visually identify colors for copper and fiber link identification.
  

Benefits to Joining Our Team

CPG offers a competitive and comprehensive package that includes additional benefits beyond enhanced medical, dental, and vision coverage

• 
  
• Health Benefits - (Medical, Dental & Vision Insurance)
  
• Flexible Spending Account Options
  
• 401K Plan
  
• Employer paid Life & Disability Insurance
  
• Paid Time Off
  
• Employee Referral Program
  
• Employee Assistance Program (EAP)
  

CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.