Engineering Structures Jobs in Hartford Remote

516 positions found — Page 2

Production Supervisor (2nd Shift)
Salary not disclosed
Newington, CT 2 days ago
Title
Production Supervisor (2nd Shift)

About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.

EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.

Description

ACCOUNTABILITY:



The position of Cell Leader is a key catalyst on a manufacturing Cell Team, who works in conjunction with Process Engineering, Quality Engineering, and hourly Cell associates to manufacture or assemble a component or major assembly. As such, this individual must supervise a group or groups engaged in various activities in the Operations organization, and act with urgency to direct the resolution of technical and logistics problems and the introduction of measures to improve operations and customer relations.



TYPICAL DUTIES:




  • Set work priorities aligned to satisfy company, customer demand and on-time delivery metrics. Collaborate with planner and peer Cell Leaders to schedule work through the various manufacturing work centers and manage work center to assure adequate flow of production. Manage line balance ensuring the pacing process is adequately staffed to maintain desired output levels. Hold direct reports accountable to meet Operating, OTD, Quality, and Safety metrics. Ensure direct reports are fully engaged performing value added work.
  • Develop and implement action plans to meet department goals in the areas of labor efficiency, labor utilization, housekeeping, on-time delivery and productivity improvements. Perform regular daily audits of key processes to ensure optimum process performance and use of latest operation sheets,
  • Maintain department/cell metrics. Ensure all direct reports understand their cell metrics and how they impact/improve each metric. Monitor Utilization rate in cell is at acceptable level (direct vs. indirect), Labor Efficiency (by person, by job), Quality Performance (Maintain Quality log), enforce work rules (breaks, cell phones, newspapers, etc.), ensure TPM/PM is being completed.
  • Coach direct reports in maintaining accurate reporting of employee time, vouchering and work performance within the area. Develop and maintain Skills Matrix for accurate identification of workforce capabilities and cross train to support business need.
  • Encourage employee involvement in and ownership of continuous improvement activities focused on LEAN and waste reduction. Implement and maintain 6S in Cell.
  • Develop, plan and implement continuous quality improvement through teams within the area of responsibility to attain World Class Quality. Ensure PDR's are written quickly & thoroughly. Initiate PRB review on suspect parts in a timely manner. Support weekly PRB meetings to determine RCCA and develop rework scenarios where possible. Respond to production problems by personally investigating and resolving such problems with hourly and salaried personnel to assure a continuing flow of product. Utilize formal problem solving methodologies to discover and eliminate root cause.
  • Actively participate, recommend, and initiate improvement in our EH&S practices and procedures.
  • Reward and recognize associates on a regular basis and support programs that encourage employee involvement and recognition.


Position Requirements

QUALIFICATIONS:




  • 5-10 years' experience working in an aerospace manufacturing environment
  • Prior experience in a unionized facility is preferred
  • Proficient in Microsoft Office applications
  • Excellent process and problem solving skills
  • Effective communication skills, including verbal (logical and organized), written, listening and presentation
  • Experience with ERP systems
  • Team player with strong people skills
  • Ability to communicate with and influence employees and management at all levels
  • Decisive and capable of dealing with conflict and resolving issues promptly
  • Take charge individual with clear sense of urgency
  • Proven track record of meeting commitments with the highest standards of ethics and integrity
  • Demonstrated experience in continuous improvement initiatives, root cause corrective action methodology, visual factory management, statistical process control techniques, quality assurance processes, coaching and performance management, safety practices, operations metrics/dashboard measurement.


EDUCATION:




  • Bachelor's degree in Operations Management, Business Management or equivalent work experience will be considered.


Shift
-not applicable-

Full-Time/Part-Time
Full-Time

Location
Applied Aerospace & Defense, Newington

Category
Manufacturing

Req Number
MAN-26-00009

Position
Supervisor (Cell Leader)

Close Date

Post Internal Days
0

Number of Openings
1

Exempt/Non-Exempt
Exempt

Hiring Manager(s)

This position is currently accepting applications.


Apply Now



Not Specified
CNC Machinist - Turning / Lathe Level II
✦ New
Salary not disclosed
Sets-up and operates CNC Turning, Multi-Axis lathes, and other Turning equipment to produce highly precision component parts that meet all quality standards.

This role is 100% in office at our plant in East Hartford, CT.

At HORST we offer a variety of benefits including but not limited to: Competitive PTO Package Paid Company Holidays 401K Match Program Medical, Dental, Vision Benefits Tuition Reimbursement/Assistance Program Major Areas of Responsibility: Set-up and operate CNC Lathes (2-axis and multi-axis) (e.g.

Eurotech, Hardinge, etc.) Will work with blueprints, operation sheets, and other work instructions.

Working from blueprints, operation sheets, travelers or other specifications, set-ups and completes the machining operations to produce a quality part.

Checks to make sure that the material to be used meets all specifications.

Obtains bar stock or material from staging area.

Performs complex set-ups of own work or for others.

Makes all required adjustments to the machinery.

Obtains tooling, gages, inserts and all other equipment needed to complete the set-up and brings up the program.

Edits the program as necessary.

Assists other Operators or Set-up/Operators with set-up or production problems and helps to train other set-up/operators.

Ensures that all manufactured parts are in full compliance to quality standards.

Performs visual inspections (part relationship to operation sheet/blueprint configuration) on all parts produced and performs actual dimensional verification using measuring instruments as per the guidelines established by the department or the Quality Assurance Department.

Replaces all worn or damaged tooling as necessary.

Verifies and records actual part count, both prior to and upon completion of all work Performs all routine maintenance on the equipment and maintains all fluid levels.

Keeps the equipment and work area clean and organized.

Returns excess bar stock or material to the staging area.

Moves the finished work to an assigned area.

Enters all work performed into the database and documents all scrap.

Notifies lead person or supervisor of any parts shortages or machining problems/difficulties.

Packs and washes/preserves parts as needed.

Performs other machining and assembly operations as needed.

Performs other related duties as required.

Interacts with associates from all departments.

Requirements: High School diploma or equivalent.

Technical school training a plus.

3 years of set-up experience minimum required Experience with aerospace products and/or other close tolerance parts is a plus.

Must be familiar with Fanuc and/or Okuma Controls Must be able to set and change tools.

Must be able to use standard gauges and inspection techniques.

Experience with SPC, inspection documentation, and problem solving is a plus.

Strong interpersonal and analytical skills.

Must be able to read and write comments, understand operation sheets/blueprints, specifications, and all applicable company/customer paperwork.

Must be able to read CNC programs.

Five plus years of increasingly diverse experience in a machine shop or CNC machining environment Physical Requirements: Ability to push/pull/carry up to 50 lbs.

Able to stand for up to 8 hours.

PIbcbf0a93e51a-7192
Not Specified
CNC Machinist - Lathe Operator - Level III - 1st or 2nd Shift
🏢 HORST ENGINEERING & MANUFACTURING CO
Salary not disclosed
East Hartford, CT, Hartford County, CT 3 days ago
Sets-up and operates CNC Turning, Multi-Axis lathes, and other Turning equipment to produce highly precision component parts that meet all quality standards.

Ability and willingness to train others.

Can work independently and lead a project.

This role is for 1st or 2nd shift.

1st shift is 7am-3:30.

2nd shift is 3:00
- 11:30pm This role is 100% in office at our plant in East Hartford, CT.

At HORST we offer a variety of benefits including but not limited to: Competitive PTO PackagePaid Company Holidays401K Match ProgramMedical, Dental, Vision BenefitsTuition Reimbursement/Assistance Program Major Areas of Responsibility: Set-up and operate CNC Lathes (2-axis and multi-axis) (e.g.

Eurotech, Hardinge, etc.) Will work with blueprints, operation sheets, and other work instructions.

Working from blueprints, operation sheets, travelers or other specifications, set-ups and completes the machining operations to produce a quality part.

Checks to make sure that the material to be used meets all specifications.

Obtains bar stock or material from staging area.

Performs complex set-ups of own work or for others.

Makes all required adjustments to the machinery.

Obtains tooling, gages, inserts and all other equipment needed to complete the set-up and brings up the program.

Edits the program as necessary.

Assists other Operators or Set-up/Operators with set-up or production problems and helps to train other set-up/operators.

Ensures that all manufactured parts are in full compliance to quality standards.

Performs visual inspections (part relationship to operation sheet/blueprint configuration) on all parts produced and performs actual dimensional verification using measuring instruments as per the guidelines established by the department or the Quality Assurance Department.

Replaces all worn or damaged tooling as necessary.

Verifies and records actual part count, both prior to and upon completion of all work Performs all routine maintenance on the equipment and maintains all fluid levels.

Keeps the equipment and work area clean and organized.

Returns excess bar stock or material to the staging area.

Moves the finished work to an assigned area.

Enters all work performed into the database and documents all scrap.

Notifies lead person or supervisor of any parts shortages or machining problems/difficulties.

Packs and washes/preserves parts as needed.

Performs other machining and assembly operations as needed.

Performs other related duties as required.

Interacts with associates from all departments.

Requirements: High School diploma or equivalent.

Technical school training a plus.

3 years of set-up experience minimum required Experience with aerospace products and/or other close tolerance parts is a plus.

Must be familiar with Fanuc and/or Okuma Controls Must be able to set and change tools.

Must be able to use standard gauges and inspection techniques.

Experience with SPC, inspection documentation, and problem solving is a plus.

Strong interpersonal and analytical skills.

Must be able to read and write comments, understand operation sheets/blueprints, specifications, and all applicable company/customer paperwork.

Must be able to read CNC programs.

Five plus years of increasingly diverse experience in a machine shop or CNC machining environment Physical Requirements: Ability to push/pull/carry up to 50 lbs.

Able to stand for up to 8 hours.

PIe4204bd7e1eb-6932
Not Specified
Production Supervisor-2nd Shift
✦ New
Salary not disclosed
Glastonbury, CT 1 day ago

Company Description:

Hanwha Aerospace USA has long been recognized as a leader in the development and supply of flight critical Aerospace/Defense components and assemblies. Operating out of four state-of-the-art facilities located in Connecticut, Hanwha Aerospace USA offers growth and career development opportunities to enrich your talents.


Summary:

We are seeking a skilled and detail oriented Production Supervisor in our Glastonbury location to plan, direct, and coordinate all assigned operations following manufacturing objectives. As a Production Supervisor, you will manage and provide direction to departmental personnel in implementing modern, cost-effective practices to achieve the goals of the department according to all safety, quality, housekeeping, and production standards. This position will supervise all personnel and operations in the department by employing leadership, hands-on technical support, scheduling, and project management.


Essential Functions:

  • Monitor manufacturing activities and ensure manufacturing processes are being followed and that all quality requirements are being met or exceeded.
  • Review and dispose of all scrap produced in the department which includes effective root cause and corrective action analysis.
  • Direct departmental activities providing assurance of safety, health, and compliance with environmental rules and regulations.
  • Directly supervises the employees in their department. Carries out supervisory responsibilities in accordance with the organization’s policies and applicable laws.
  • Engage in efforts to continuously improve the processes on the shop floor.
  • Ensure that HR policies, procedures, and regulations are followed and documented.
  • Maintain a thorough knowledge of all processes and equipment.
  • Meet departmental metrics.
  • Perform other related duties or responsibilities as required.

Required Qualifications & Experience:

  • Must be a “U.S. Person” as defined by the U.S. Government and able to work without restrictions with ITAR related data.
  • High School Diploma or GED required.
  • 5+ years experience in a manufacturing environment; aerospace preferred.
  • 3+ years of supervision experience.


Desired Knowledge, Skills, and Abilities:

  • Bachelor’s or Associate’s degree in Engineering or other related field preferred.
  • Must be able to read, write, understand, and speak English at a functional level.
  • Ability to interpret and edit FANUC G-code programming.
  • Proficient in FANUC, Okuma controls.
  • Ability to communicate professionally and effectively with all levels of the organization.
  • Ability to interpret policies, procedures, and standard business practices.
  • Ability to read and interpret blueprints and engineering work instructions.
  • Ability to initiate, record, recommend, verify, and implement corrective actions or solutions to problems relating to product, process or quality system.
  • Fluent in Microsoft Office applications.
  • Must have strong attention to detail.
  • Ability to travel domestically. – 5%


Reasonable accommodation may be made to enable individuals with disabilities to perform.

Not Specified
Technical Facilities Manager
✦ New
🏢 Hays
Salary not disclosed
Hartford, CT 1 day ago

Technical Facilities Manager | $110k - $130k | Healthcare, Connecticut


Your new company

Hays have partnered with a leading energy infrastructure service firm, who are looking to hire an experienced Facilities Management leader to oversee the operation and optimization of a Central Energy Plant (CEP). The role will work with key stakeholders in guiding best-in-class energy strategies for thermal producing assets in a healthcare facility.


Your new role

As the Technical Facilities Manager, you will be responsible for analyzing daily energy usage and identifying opportunities to enhance efficiency and improve operational practices. Working daily with internal teams and 3rd party vendors, you will provide mentorship on energy management and support the development of long‑term strategies to maximize performance. The role will take full responsibility for the operation and maintenance of the CEP, ensuring all systems run safely, reliably, and efficiently. This includes managing maintenance reserve accounts, overseeing operator training, maintaining an up‑to‑date plant operating manual, and coordinating troubleshooting activities with both on‑site staff and remote support teams. You will also collaborate closely with engineering, procurement, and construction teams to align project activities with ongoing operations.


What you'll need to succeed

  • PE preferred or FE and working towards obtaining PE.
  • 4+ years’ experience in any of the following: management experience in a central plant or facility, mechanical construction with a large mechanical subcontractor or MEP design consultant managing multiple sites with large teams.
  • 4 year Mechanical Engineering degree (plus, not required).
  • Well versed in building codes and standards.
  • Excellent communication and organizational skills.
  • Effective verbal and written communication skills.
  • Detail-oriented with the ability to multitask projects in a fast-paced environment.


What you'll get in return

You will have the opportunity to work with one of the nation’s largest energy‑as‑a‑service providers, with more than a century of industry expertise. With established accounts and long‑term contracts across some of the country’s largest healthcare and education systems, you will play a key role alongside experienced leaders in a mission‑critical environment.

Not Specified
Inside Sales Representative
✦ New
Salary not disclosed

Insurance Sales Specialist


Take Control of Your Career Today

We are looking for motivated, disciplined and goal-driven individuals to join our high-performing insurance sales team! Whether you’re an experienced sales professional or looking for a rewarding career change, we provide everything you need to succeed—leads, training, mentorship, and an unmatched commission structure.


Why Join Us?

No Cold Calling – Leverage our unique platform that targets qualified candidates seeking our diverse life insurance products, allowing you to focus more on client interactions and less on lead hunting.

Flexible Schedule – Work remotely, in person, or a combination of both. You decide!

Unlimited Earning Potential – Competitive compensation with the most attractive commission and bonus structure in the industry and residual income on renewals.

Comprehensive Training – We provide the tools, scripts, and mentorship to help you close deals quickly as well as a supportive team environment with access to seasoned mentors.

Career Growth – Advancement opportunities based on performance, not tenure.


What You’ll Do:

Get Licensed!- Must have or be willing to obtain a life insurance license (we provide guidance and support to help you get licensed).

Meet with Clients – Perform comprehensive needs assessments to understand clients' financial goals and insurance needs, presenting and explaining life insurance options to help clients make informed decisions.

Present Tailored Solutions – Deliver captivating sales presentations to individuals and groups, showcasing the benefits and features of our life insurance products.

Close Sales & Earn Big – Guide clients through the application process and celebrate each win!

Build Long-Term Relationships – Cultivate and maintain long-term relationships with clients, offering continuous support and service. Conduct regular follow-ups to ensure customer satisfaction and policy retention.

Stay Informed – Stay up to date on industry trends, competitive products, and market conditions. Utilize this knowledge to position our life insurance products effectively and provide clients with pertinent information.


What You Need to Succeed:

Strong communication and persuasive sales skills

Self-motivated and goal-oriented mindset

Ability to work independently and manage your own schedule

No experience required – we’ll help you get licensed if you’re not already!

Valid driver’s license & reliable transportation (for in-person meetings)


Compensation & Perks:

High commission structure with monthly bonuses

Residual income paid annually on policy renewals

Comprehensive training and continuous professional development.

Fast-track promotion opportunities

Not Specified
Mechanic Diesel Technician
$25.25 per hour
HARTFORD, CT 5 days ago

Position Description



Immediately hiring a Permanent Full-Time Experienced Mid-Level Diesel Technician to support our Truck Fleet at Ryder in Hartford, Connecticut



Hear it from a Ryder Technician Employee Here:






  • Hourly Pay: $25.25 per hour

  • Certification Bonus of $100 for each New ASE Certification Obtained up to $700

  • Quarterly Bonus: Ryder Pays you up to $500 Every Quarter - Four Times Per Year

  • Sign On Bonus: Ryder Pays You $1250 at 30 days and $1250 at 90 days

  • Tool Box/Tool Allowance

  • Schedule: Monday–Friday Weekends OFF

  • Hours: Second Shift 3:00 pm – 11:30 pm


We want the right Maintenance Repair Mechanic to join us at Ryder to work on Heavy Duty Vehicles.



Apply Here with Ryder Today



Spots are filling fast — click apply now to secure your spot.



Questions? Call Kim or text “Hartford T2” to 9 to speak with your recruiter today.



We have all the benefits other shops do without the wait!




  • Annual Merit Pay Increases Every Year

  • On the Job Paid Training

  • Medical, Dental, Vision, 401 K etc. Start at 30 Days

  • We love our Ryder babies and offer 12 weeks of PAID Maternity Leave

  • Paid Time Off Starts Accruing at DAY ONE with 80 hours per year

  • Additional Day Off for U.S. Military Veterans

  • 401 K offers a company match

  • HIGH VALUED Stock at 15 % Employee Discount

  • PPE, UNIFORMS, AND BOOT ALLOWANCE PROVIDED

  • Ryder Top Technician Recognition Programs rewards 12 Top Techs each year with Cash Prizes from $250 to $50,000!

  • Technician Tuition Repayment Program up to $5,000! Ask your recruiter about it today!


Stop In and Meet the Team at the Ryder Shop: 185 West Service Rd. Hartford, CT 06120



Click Here to See All Ryder Careers:

We want YOU to join our family made up of Proud Women and Men in Logistics who work alongside Military Reserve and Veterans we hire everyday



Refer anyone and get rewarded with UNLIMITED bonuses up $1,500 for every Ryder hired Diesel Mechanic, Service Employee, Driver, Warehouse Associate and more!



EEO/AA/Female/Minority/Disabled/Veteran



Requirements




  • High school diploma or equivalent preferred

  • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred

  • Basic tools, required

  • Demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:

  • Routine preventative maintenance, which should include oil changes, brake and tire work, required

  • Two (2) years or more of a combination of classroom training and work experience in required experience, preferred

  • Valid Commercial Driver License (CDL) CLASS A,preferred

  • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:

  • Must be able to obtain CDL within 6 months after hire

  • Pass a Ryder Drug Test

  • Pass a DOT physical

  • Pass a Ryder road test

  • Pass a Ryder Background and Motor vehicle check including drug and alcohol verification from previous employers for the last 3 years


Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned.



Responsibilities




  • Performs vehicle maintenance and repair duties

  • Performs standard vehicle maintenance

  • Performs standard component inspections and repairs

  • Performs preventive maintenance

  • Diagnoses standard mechanical and electronic problems, utilizing diagnostic computer when applicable

  • Identifies root cause of basic failures/conditions and perform repairs as required

  • Replaces defective components as instructed

  • Performs facility maintenance duties

  • Interacts with customers/drivers to properly determine nature of complaint once assigned a task

  • Utilizes key functions of Shop Management System and electronic documentation available

  • Works in accordance with all federal/ provincial and corporate compliance guidelines (i.e., safety, DOT, MOT)

  • Performs other support duties as required to support operations. These could include but are not limited to Service Island support


Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability.



Posted Date 7 days ago (3/12/2026 3:35 PM)



Requisition ID 2



Location (Posting Location) : State/Province CT



Location (Posting Location) : City HARTFORD



Location (Posting Location) : Postal Code 06106



Category Technicians/Service Employees4



Employment Type Regular-Full time



Travel Requirements 0-10%



Position Code 1000120



Min Pay USD $25.25/Hr.



Max Pay USD $25.25/Hr.


permanent
Fleet Mechanic
$42,002 - 75,602
Windsor, CT 4 days ago
101959615 Day Hill Road, Windsor, Connecticut 06095

TruGreen accepts applications on an ongoing basis.

Job Description

TruGreen is committed to providing personalized attention for our associates. We focus on developing our people by building proud, dynamic teams while helping associates reach their personal and professional goals. We continuously strive to make TruGreen an employer of choice and "a great place to work!"

Position Overview

Performs scheduled and preventative maintenance to production equipment, fleet vehicles and specialized equipment. Repairs equipment and orders parts as necessary. Maintains service/repair records.

Responsibilities

  • Diagnoses and repairs fleet vehicle chassis and specialized vehicle back-end tank, pump and spray systems.

  • Diagnoses and repairs tractors, forklifts, small engines and specialized equipment (aerators, seeders, spreaders, etc.).

  • Responsible for accurately documenting all repairs in an electronic maintenance management system.

  • Maintain parts inventory and work area in clean and orderly fashion.

  • Arranges, follows up and documents outsourced maintenance performed by vendors and local service providers.

  • Develops and executes preventative maintenance programs.

  • Prepares and manages maintenance budget.

  • Responds to vehicle and equipment breakdowns in field as needed/required.

Education and Experience Requirements

  • High school diploma or general education degree (GED) and 1-4 years automotive mechanic experience required or equivalent combination of education and experience

Knowledge, Skills, and Abilities

  • Ability to operate independently and collaboratively within a team.

  • Computer skills with Microsoft Office applications (Word, Excel, Outlook, Internet Explorer, etc.).

  • Ability to read and interpret documents such as safety rules, operating and maintenance instruction, and procedure manuals. Ability to write routine reports and correspondence.

  • Mathematical skills to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume.

  • Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.

  • Attention to detail.

  • Verbal and written communication skills.

  • Time management and organizational skills, including punctuality for on-time attendance.

Physical Demands & Working Conditions

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Regularly required to:

  • Sit, stand and walk

  • Use hands and arms to handle, feel or reach

  • Speak and hear

  • Use close vision abilities

  • Operate a vehicle with a valid drivers license

Occasionally required to:

  • Lift or move up to 50 lbs

  • Stoop, kneel, crouch or crawl

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.

 

Noise level

  • Low to moderate

     

Adverse Conditions

  • Minimal

Ability to speak, read and write fluently in English is required.

You MUST BE physically located in the United States while performing this job.

TruGreen is proud to affirm our commitment to hiring veterans. We recognize and appreciate the exceptional skills, dedication, and leadership that veterans bring to the workforce. By fostering an inclusive and diverse environment, we aim to leverage the unique experiences of veterans, creating a richer, more dynamic workplace.

Pay Ranges $42,002.00 - $75,602.00

This range is based on the qualifications necessary for the position, including experience, training, and other considerations permitted by law. Factors that may be used when making an offer may include a candidate’s skills, experience, and geographic location, the expected quality and quantity of work, and internal pay alignment, as needed. Most candidates will start in the bottom half of the pay range. The upper end of the range will generally be reserved for candidates with extensive experience. An employee’s pay history will not be a contributing factor where prohibited by local law. In addition to monetary compensation, we offer benefits, including Medical/Dental/Vision insurance and Company-matching 401(k) in addition to other programs and perks.

TruGreen is committed to Diversity and Inclusion. We encourage diverse candidates to apply to this position.
 
We are an Equal Opportunity/Affirmative Action Employer - Minorities/Females/Protected Veterans/Individuals with Disabilities. To learn more, please visit   EEOC/EEO | TruGreen ( ).

 

 
California Residents: When you express interest in or apply for a job with TruGreen Limited Partnership, we collect personal information about you, potentially including personal identifiers, contact information, protected classifications, pre-hire information, professional or employment-related information, education history, and/or medical information, for the following business purposes: to comply with state and federal law and regulations requiring employers to maintain certain records; to evaluate your job application and candidacy for employment; and to obtain and verify background checks (including criminal and motor vehicle records), pre-employment drug testing, and references.

Massachusetts Residents: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

TruGreen performs pre-employment testing.
 
To view our disclaimer,  
Not Specified
FULL TIME MECHANIC/EQUIPMENT MAINTENANCE
🏢 TruGreen
Salary not disclosed
101959615 Day Hill Road, Windsor, Connecticut 06095

TruGreen accepts applications on an ongoing basis.

Job Description

TruGreen is committed to providing personalized attention for our associates. We focus on developing our people by building proud, dynamic teams while helping associates reach their personal and professional goals. We continuously strive to make TruGreen an employer of choice and "a great place to work!"

Position Overview

Performs scheduled and preventative maintenance to production equipment, fleet vehicles and specialized equipment. Repairs equipment and orders parts as necessary. Maintains service/repair records.

Responsibilities

  • Diagnoses and repairs fleet vehicle chassis and specialized vehicle back-end tank, pump and spray systems.
  • Diagnoses and repairs tractors, forklifts, small engines and specialized equipment (aerators, seeders, spreaders, etc.).
  • Responsible for accurately documenting all repairs in an electronic maintenance management system.
  • Maintain parts inventory and work area in clean and orderly fashion.
  • Arranges, follows up and documents outsourced maintenance performed by vendors and local service providers.
  • Develops and executes preventative maintenance programs.
  • Prepares and manages maintenance budget.
  • Responds to vehicle and equipment breakdowns in field as needed/required.

Education and Experience Requirements

  • High school diploma or general education degree (GED) and 1-4 years automotive mechanic experience required or equivalent combination of education and experience

Knowledge, Skills, and Abilities

  • Ability to operate independently and collaboratively within a team.
  • Computer skills with Microsoft Office applications (Word, Excel, Outlook, Internet Explorer, etc.).
  • Ability to read and interpret documents such as safety rules, operating and maintenance instruction, and procedure manuals. Ability to write routine reports and correspondence.
  • Mathematical skills to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume.
  • Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.
  • Attention to detail.
  • Verbal and written communication skills.
  • Time management and organizational skills, including punctuality for on-time attendance.

Physical Demands & Working Conditions

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Regularly required to:

  • Sit, stand and walk
  • Use hands and arms to handle, feel or reach
  • Speak and hear
  • Use close vision abilities
  • Operate a vehicle with a valid drivers license

Occasionally required to:

  • Lift or move up to 50 lbs
  • Stoop, kneel, crouch or crawl

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.
 

Noise level

  • Low to moderate
      Adverse Conditions
    • Minimal
    Ability to speak, read and write fluently in English is required. You MUST BE physically located in the United States while performing this job. TruGreen is proud to affirm our commitment to hiring veterans. We recognize and appreciate the exceptional skills, dedication, and leadership that veterans bring to the workforce. By fostering an inclusive and diverse environment, we aim to leverage the unique experiences of veterans, creating a richer, more dynamic workplace.

Pay Ranges

$42,002.00 - $75,602.00 This range is based on the qualifications necessary for the position, including experience, training, and other considerations permitted by law. Factors that may be used when making an offer may include a candidate's skills, experience, and geographic location, the expected quality and quantity of work, and internal pay alignment, as needed. Most candidates will start in the bottom half of the pay range. The upper end of the range will generally be reserved for candidates with extensive experience. An employee's pay history will not be a contributing factor where prohibited by local law. In addition to monetary compensation, we offer benefits, including Medical/Dental/Vision insurance and Company-matching 401(k) in addition to other programs and perks. TruGreen is committed to Diversity and Inclusion. We encourage diverse candidates to apply to this position.
 
We are an Equal Opportunity/Affirmative Action Employer - Minorities/Females/Protected Veterans/Individuals with Disabilities. To learn more, please visit   EEOC/EEO | TruGreen ( ).
 

 
California Residents: When you express interest in or apply for a job with TruGreen Limited Partnership, we collect personal information about you, potentially including personal identifiers, contact information, protected classifications, pre-hire information, professional or employment-related information, education history, and/or medical information, for the following business purposes: to comply with state and federal law and regulations requiring employers to maintain certain records; to evaluate your job application and candidacy for employment; and to obtain and verify background checks (including criminal and motor vehicle records), pre-employment drug testing, and references.

Massachusetts Residents: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

TruGreen performs pre-employment testing.
 
permanent
Full-time Mechanic
🏢 TruGreen
Salary not disclosed
Windsor, Connecticut 4 days ago
101959615 Day Hill Road, Windsor, Connecticut 06095

TruGreen accepts applications on an ongoing basis.

Job Description

TruGreen is committed to providing personalized attention for our associates. We focus on developing our people by building proud, dynamic teams while helping associates reach their personal and professional goals. We continuously strive to make TruGreen an employer of choice and "a great place to work!"

Position Overview

Performs scheduled and preventative maintenance to production equipment, fleet vehicles and specialized equipment. Repairs equipment and orders parts as necessary. Maintains service/repair records.

Responsibilities

  • Diagnoses and repairs fleet vehicle chassis and specialized vehicle back-end tank, pump and spray systems.
  • Diagnoses and repairs tractors, forklifts, small engines and specialized equipment (aerators, seeders, spreaders, etc.).
  • Responsible for accurately documenting all repairs in an electronic maintenance management system.
  • Maintain parts inventory and work area in clean and orderly fashion.
  • Arranges, follows up and documents outsourced maintenance performed by vendors and local service providers.
  • Develops and executes preventative maintenance programs.
  • Prepares and manages maintenance budget.
  • Responds to vehicle and equipment breakdowns in field as needed/required.

Education and Experience Requirements

  • High school diploma or general education degree (GED) and 1-4 years automotive mechanic experience required or equivalent combination of education and experience

Knowledge, Skills, and Abilities

  • Ability to operate independently and collaboratively within a team.
  • Computer skills with Microsoft Office applications (Word, Excel, Outlook, Internet Explorer, etc.).
  • Ability to read and interpret documents such as safety rules, operating and maintenance instruction, and procedure manuals. Ability to write routine reports and correspondence.
  • Mathematical skills to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume.
  • Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.
  • Attention to detail.
  • Verbal and written communication skills.
  • Time management and organizational skills, including punctuality for on-time attendance.

Physical Demands & Working Conditions

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Regularly required to:

  • Sit, stand and walk
  • Use hands and arms to handle, feel or reach
  • Speak and hear
  • Use close vision abilities
  • Operate a vehicle with a valid drivers license

Occasionally required to:

  • Lift or move up to 50 lbs
  • Stoop, kneel, crouch or crawl

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.
 

Noise level

  • Low to moderate
      Adverse Conditions
    • Minimal
    Ability to speak, read and write fluently in English is required. You MUST BE physically located in the United States while performing this job. TruGreen is proud to affirm our commitment to hiring veterans. We recognize and appreciate the exceptional skills, dedication, and leadership that veterans bring to the workforce. By fostering an inclusive and diverse environment, we aim to leverage the unique experiences of veterans, creating a richer, more dynamic workplace.

Pay Ranges

$42,002.00 - $75,602.00 This range is based on the qualifications necessary for the position, including experience, training, and other considerations permitted by law. Factors that may be used when making an offer may include a candidate's skills, experience, and geographic location, the expected quality and quantity of work, and internal pay alignment, as needed. Most candidates will start in the bottom half of the pay range. The upper end of the range will generally be reserved for candidates with extensive experience. An employee's pay history will not be a contributing factor where prohibited by local law. In addition to monetary compensation, we offer benefits, including Medical/Dental/Vision insurance and Company-matching 401(k) in addition to other programs and perks. TruGreen is committed to Diversity and Inclusion. We encourage diverse candidates to apply to this position.
 
We are an Equal Opportunity/Affirmative Action Employer - Minorities/Females/Protected Veterans/Individuals with Disabilities. To learn more, please visit   EEOC/EEO | TruGreen ( ).
 

 
California Residents: When you express interest in or apply for a job with TruGreen Limited Partnership, we collect personal information about you, potentially including personal identifiers, contact information, protected classifications, pre-hire information, professional or employment-related information, education history, and/or medical information, for the following business purposes: to comply with state and federal law and regulations requiring employers to maintain certain records; to evaluate your job application and candidacy for employment; and to obtain and verify background checks (including criminal and motor vehicle records), pre-employment drug testing, and references.

Massachusetts Residents: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

TruGreen performs pre-employment testing.
 
permanent
Telecom & Contact Center Engineering Sr. Analyst (Hybrid)
Salary not disclosed

*At Securian Financial the internal position title isEngineering Senior Analyst or Engineering Consultant. The title and salary will be determined based on experience and applied skills.*

Position Summary:

Are you a hands-on engineer who enjoys designing, building, and supporting modern communication platforms? Do you like solving complex problems and working with teams that move quickly from idea to delivery? This role offers the opportunity to make an immediate impact.

As a member of the Telephony and Contact Center Technologies team, you will design, engineer, implement, and support Securian's enterprise telephony and contact center platforms. This role is focused on delivering secure, scalable, cloud-first communication solutions using RingCentral, NiCE CXone, and Cyara.

You will work closely with Contact Center Operations, Agile delivery teams, and technology partners to continuously improve customer and associate experiences across the enterprise.

Responsibilities include but not limited to:

  • Design, engineer, implement, and support enterprise UCaaS and CCaaS platforms

  • Provide daily operational support for cloud-based telephony, unified communications, SIP services, and IVR solutions

Qualifications:

  • Hands-on experience engineering and supporting cloud-based telephony or contact center platforms

  • Strong understanding of VoIP technologies, SIP, and call routing concepts

  • RingCentral and RingCentral Contact Center engineering

  • NiCE inContact / CXone administration and development

  • Cyara or similar modern telephony orchestration platforms

  • Experience designing and supporting UCaaS and CCaaS (including IVRs and contact center workflows) solutions in large enterprise environments

  • Solid knowledge of networking concepts related to real-time communications

Preferred Qualifications:

  • Supporting remote contact center agents

  • REST API integrations and automation

  • Scripting using PowerShell or Python

  • Workforce management, call recording, or speech technologies

  • PSTN carrier and phone number lifecycle management

This role plays a critical part in modernizing Securian's communication platforms and ensuring reliable, scalable experiences for customers and associates. You will have the opportunity to influence technical direction and deliver compelling solutions that matter.

#LI-Hybrid**This position willhave a hybrid working arrangement.**

Securian Financial believes in hybrid work as an integral part of our culture. Associates get the benefit of working both virtually and in our offices. Ifyou'reina commutable distance (90 minutes)you'lljoin us 3 days each week in our offices to collaborate and build relationships. Our policy allows flexibility for the reality of business and personal schedules.

The estimated base pay range for this job is:

$72,000.00 - $134,000.00

Pay may vary depending on job-related factors and individual experience, skills, knowledge, etc. More information on base pay and incentive pay (if applicable) can be discussed with a member of the Securian Financial Talent Acquisition team.

Be you. With us. At Securian Financial, we understand that attracting top talent means offering more than just a job - it means providing a rewarding and fulfilling career. As a valued member of our high-performing team, we want you to connect with your work, your relationships and your community. Enjoy our comprehensive range of benefits designed to enhance your professional growth, well-being and work-life balance, including the advantages listed here:

Paid time off:

  • We want you to take time off for what matters most to you. Our PTO program provides flexibility for associates to take meaningful time away from work to relax, recharge and spend time doing what's important to them. And Securian Financial rewards associates for their service by providing additional PTO the longer you stay at Securian.

  • Leave programs: Securian's flexible leave programs allow time off from work for parental leave, caregiver leave for family members, bereavement and military leave.

  • Holidays: Securian provides nine company paid holidays.

Company-funded pension plan and a 401(k) retirement plan: Share in the success of our company. Securian's 401(k) company contribution is tied to our performance up to 10 percent of eligible earnings, with a target of 5 percent. The amount is based on company results compared to goals related to earnings, sales and service.

Health insurance: From the first day of employment, associates and their eligible family members - including spouses, domestic partners and children - are eligible for medical, dental and vision coverage.

Volunteer time: We know the importance of community. Through company-sponsored events, volunteer paid time off, a dollar-for-dollar matching gift program and more, we encourage you to support organizations important to you.

Associate Resource Groups: Build connections, be yourself and develop meaningful relationships at work through associate-led ARGs. Dedicated groups focus on a variety of interests and affinities, including:

  • Mental Wellness and Disability

  • Pride at Securian Financial

  • Securian Young Professionals Network

  • Securian Multicultural Network

  • Securian Women and Allies Network

  • Servicemember Associate Resource Group

For more information regarding Securian's benefits, please review our Benefits page.

This information is not intended to explain all the provisions of coverage available under these plans. In all cases, the plan document dictates coverage and provisions.

Securian Financial Group, Inc. does not discriminate based on race, color, religion, national origin, sex, gender, gender identity, sexual orientation, age, marital or familial status, pregnancy, disability, genetic information, political affiliation, veteran status, status in regard to public assistance or any other protected status. If you are a job seeker with a disability and require an accommodation to apply for one of our jobs, please contact us by email at , by telephone (voice), or 711 (Relay/TTY).

To view our privacy statement click here

To view our legal statement click here


Remote working/work at home options are available for this role.
Not Specified
Test Engineering Tech II - 401 Shift Days - Flexible Shift Options for Work-Life Balance (FLORENCE)
Salary not disclosed
JOB SUMMARY

ESSENTIAL DUTIES AND RESPONSIBILITIES

· Supports the Test Engineer in the development and commission of test solutions executing the test qualification of the fixture and program as per the specific system qualification process.
· Responsibility for providing the deliverables to support the solution in production to both the Test Support Function and Manufacturing Operations.
· Assists in the build and manufacture of testers, fixtures and environmental tooling as required to meet the customer expectations.
· The Technician Engineer provides the interface to the Test Support function providing comprehensive documentation and training for all test solutions implemented.
· Provides the interface to the Manufacturing function providing comprehensive documentation and coordinating training and education for all test operations implemented.
· Through working with the Test Support function monitor and contribute to the improvement of Test Yields, Efficiency, Intermittencies and Uptime providing accurate reporting and clear targets for improvement.
· In conjunction with the Test Engineer strives to consistently upgrade the test process balancing cost, coverage with the goal of providing an optimized and cost efficient test process.
· Works closely with manufacturing and test support to ensure prioritization of support activities. He/ She will be responsible for coordinating the timetable for test readiness based on the weekly production schedule through the appropriate Test Support staff.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS

· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
Remote working/work at home options are available for this role.
temporary
Principal Mechanical Design Engineer - Data Center Infrastructure (REMOTE) - Work from anywhere with rare travel demands (AUSTIN)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Mechanical Integration Engineer

Job Family: Mechanical Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact? 

The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.

This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.

What will you do?

- Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.

- Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.

- Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.

- Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.

- Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.

- Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.

- Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).

- Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.

- Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.

- Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.

- Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.

- Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.

- Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.

- Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.

- Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.

MINIMUM QUALIFICATIONS

Education: 

- Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.

Experience: 

- 8 years' experience in mechanical design and integration of mission-critical systems.

- Proven track record of successful system designs and implementations in a relevant industry

- Strong understanding of mechanical systems, integration strategy, and system coordination

- Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.

- Excellent problem-solving skills and attention to detail

- Strong communication and teamwork abilities

PREFERRED QUALIFICATIONS

- Master’s Degree in Mechanical Engineering

- Professional Engineer (PE) License
Remote working/work at home options are available for this role.
temporary
Senior Mechanical Systems Engineer – Infrastructure Design (Remote) (WASHINGTON)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Mechanical Design Engineer

Job Family: Mechanical Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 30% domestic and/or international travel (rare)

How will you make an impact?

We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.

What will you do?

- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.

- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.

- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.

- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).

- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.

- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.

- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.

- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.

- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.

- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts

- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability

- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.

- Lead mechanical design reviews and contribute to cross-functional design validation efforts.

- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).

- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.

- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.

- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.

- Conduct root cause analysis and corrective actions for mechanical failures or field issues.

- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).

- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)

- May perform other duties and responsibilities as assigned

How will you get here?

Education:

- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.

Experience:

- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.

- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).

- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must

- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required

- Excellent communication and cross-functional collaboration skills

Knowledge, Skills, Abilities:

- Excellent interpersonal and communication skills

- Creative, self-motivated, accountable, and team-oriented

- Able to work independently with minimal oversight

- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations

- Skilled in writing reports, business correspondence, and procedural guides

- Effective at presenting information and responding to management, clients, and public queries

- Capable of influencing others and sharing best practices

- Comfortable working as part of a global team

- Capable of assessing projects, articulating risks, and developing project milestones

- Familiar with stage-gate processes in project lifecycle management (PLCM)

- Able to mentor less experienced engineers

- Ability to travel both domestically and internationally up to 30%

Preferred Qualifications: 

- Master’s Degree in Mechanical Engineering

- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.

- Active Professional Engineer (PE) license.

- Knowledge of regulatory and safety standards applicable to data center infrastructure.

- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
temporary
Principal Mechanical Design Engineer - Data Center Infrastructure (REMOTE) (WASHINGTON)
✦ New
🏢 JABIL CIRCUIT, INC
Salary not disclosed
WASHINGTON, District of Columbia, Remote 1 day ago
Job Title: Principal Mechanical Integration Engineer

Job Family: Mechanical Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact? 

The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.

This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.

What will you do?

- Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.

- Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.

- Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.

- Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.

- Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.

- Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.

- Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).

- Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.

- Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.

- Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.

- Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.

- Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.

- Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.

- Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.

- Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.

MINIMUM QUALIFICATIONS

Education: 

- Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.

Experience: 

- 8 years' experience in mechanical design and integration of mission-critical systems.

- Proven track record of successful system designs and implementations in a relevant industry

- Strong understanding of mechanical systems, integration strategy, and system coordination

- Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.

- Excellent problem-solving skills and attention to detail

- Strong communication and teamwork abilities

PREFERRED QUALIFICATIONS

- Master’s Degree in Mechanical Engineering

- Professional Engineer (PE) License
Remote working/work at home options are available for this role.
temporary
Principal Mechanical Design Engineer - Data Center Infrastructure (REMOTE) (AUSTIN)
✦ New
🏢 JABIL CIRCUIT, INC
Salary not disclosed
AUSTIN, Texas, Remote 1 day ago
Job Title: Principal Mechanical Integration Engineer

Job Family: Mechanical Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact? 

The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.

This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.

What will you do?

- Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.

- Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.

- Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.

- Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.

- Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.

- Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.

- Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).

- Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.

- Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.

- Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.

- Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.

- Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.

- Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.

- Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.

- Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.

MINIMUM QUALIFICATIONS

Education: 

- Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.

Experience: 

- 8 years' experience in mechanical design and integration of mission-critical systems.

- Proven track record of successful system designs and implementations in a relevant industry

- Strong understanding of mechanical systems, integration strategy, and system coordination

- Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.

- Excellent problem-solving skills and attention to detail

- Strong communication and teamwork abilities

PREFERRED QUALIFICATIONS

- Master’s Degree in Mechanical Engineering

- Professional Engineer (PE) License
Remote working/work at home options are available for this role.
temporary
Principal Mechanical Design Engineer - Data Center Infrastructure (REMOTE)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Principal Mechanical Integration Engineer
Mechanical Design Engineering 
Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)

The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.

This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.

Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.
Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.
Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.
Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.
Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.
Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.
Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).
Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.
Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.
Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.
Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.
Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.
Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.
Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.
Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.

Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.

8 years' experience in mechanical design and integration of mission-critical systems.
~ Proven track record of successful system designs and implementations in a relevant industry
~ Strong understanding of mechanical systems, integration strategy, and system coordination
~ Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.
~ Master’s Degree in Mechanical Engineering
~
Remote working/work at home options are available for this role.
permanent
SAP Engineer - Licensing and Compensation (Hybrid)
🏢 Securian
Salary not disclosed
Saint Paul, MN, Hybrid 3 days ago

*Securian Financial the internal position title is Engineering Sr Analyst or Engineering Consultant. Title and salary will be determined based on applied skills.*

Position Summary:

Join theEnterprise Partner Solutions (EPS)team as aLicensing and Compensation Engineer, where you'll drive innovation in partner experience using cutting-edge SAP technologies. This team envisions a future where every financial producer is empowered from day one through intuitive, reliable, and scalable technology. Our engineering team is committed to transforming the producer experience by delivering back-end systems that simplify onboarding, ensure compliance in licensing, and guarantee timely and accurate compensation. We strive to be the trusted backbone of producer operations, enabling our company to grow with confidence and integrity. If you're passionate about engineering solutions that make a measurable impact, this is your opportunity to shape the future of partner engagement at scale.

Responsibilities include but not limited to:

  • Support and maintain SAP technologies related to partner compensation and licensing, including APM (ICM), ALM, OK2, and Advanced Workflow.

  • Perform analysis, design, development, and integration on medium to high level complexity assignments.

  • Develop and support automation capabilities through webservices and APIs.

  • Troubleshoot and resolve incidents across the licensing and compensation platform, including integrations with internal and external systems.

  • Collaborate with product analysts, quality engineers, and business stakeholders to deliver enhancements and ensure platform stability.

  • Analyze job failures, support tickets, and backlog stories to identify trends and drive continuous improvement.

  • Participate in Agile ceremonies and contribute to sprint planning, story refinement, and retrospectives.

  • Document technical processes and contribute to knowledge sharing across the EPS team.

Qualifications:

  • Bachelor's degree in Computer Science, Information Systems, or related field, or equivalent experience.

  • 3+ years of experience supporting SAP technologies, preferably in compensation or licensing domains.

  • Familiarity with SAP ICM/APM and ALM modules.

  • Strong problem-solving skills and ability to manage multiple priorities.

  • Excellent communication skills and ability to work cross-functionally.

  • Experience with Agile methodologies and DevOps practices is a plus.

Preferred Qualifications:

  • SAP Certification in relevant Modules

  • Development Languages: Java, Groovy, SQL, Git, IntelliJ, webservices

  • Understanding of compensation payment structures for agents and familiarity with licensing and regulatory compliance frameworks governing producer eligibility to sell products.

  • Ability to work independently and as part of a collaborative team.

  • Commitment to continuous learning and process improvement.

#LI-hybrid **This position will be in a hybrid working arrangement.**

Securian Financial believes in hybrid work as an integral part of our culture. Associates get the benefit of working both virtually and in our offices. If you're in a commutable distance (90 minutes) you'll join us 3 days each week in our offices to collaborate and build relationships. Our policy allows flexibility for the reality of business and personal schedules.

The estimated base pay range for this job is:

$72,000.00 - $134,000.00

Pay may vary depending on job-related factors and individual experience, skills, knowledge, etc. More information on base pay and incentive pay (if applicable) can be discussed with a member of the Securian Financial Talent Acquisition team.

Be you. With us. At Securian Financial, we understand that attracting top talent means offering more than just a job - it means providing a rewarding and fulfilling career. As a valued member of our high-performing team, we want you to connect with your work, your relationships and your community. Enjoy our comprehensive range of benefits designed to enhance your professional growth, well-being and work-life balance, including the advantages listed here:

Paid time off:

  • We want you to take time off for what matters most to you. Our PTO program provides flexibility for associates to take meaningful time away from work to relax, recharge and spend time doing what's important to them. And Securian Financial rewards associates for their service by providing additional PTO the longer you stay at Securian.

  • Leave programs: Securian's flexible leave programs allow time off from work for parental leave, caregiver leave for family members, bereavement and military leave.

  • Holidays: Securian provides nine company paid holidays.

Company-funded pension plan and a 401(k) retirement plan: Share in the success of our company. Securian's 401(k) company contribution is tied to our performance up to 10 percent of eligible earnings, with a target of 5 percent. The amount is based on company results compared to goals related to earnings, sales and service.

Health insurance: From the first day of employment, associates and their eligible family members - including spouses, domestic partners and children - are eligible for medical, dental and vision coverage.

Volunteer time: We know the importance of community. Through company-sponsored events, volunteer paid time off, a dollar-for-dollar matching gift program and more, we encourage you to support organizations important to you.

Associate Resource Groups: Build connections, be yourself and develop meaningful relationships at work through associate-led ARGs. Dedicated groups focus on a variety of interests and affinities, including:

  • Mental Wellness and Disability

  • Pride at Securian Financial

  • Securian Young Professionals Network

  • Securian Multicultural Network

  • Securian Women and Allies Network

  • Servicemember Associate Resource Group

For more information regarding Securian's benefits, please review our Benefits page.

This information is not intended to explain all the provisions of coverage available under these plans. In all cases, the plan document dictates coverage and provisions.

Securian Financial Group, Inc. does not discriminate based on race, color, religion, national origin, sex, gender, gender identity, sexual orientation, age, marital or familial status, pregnancy, disability, genetic information, political affiliation, veteran status, status in regard to public assistance or any other protected status. If you are a job seeker with a disability and require an accommodation to apply for one of our jobs, please contact us by email at , by telephone (voice), or 711 (Relay/TTY).

To view our privacy statement click here

To view our legal statement click here


Remote working/work at home options are available for this role.
Not Specified
Principal Thermal Rack Engineer (Rack Integration Solutions) - Hybrid Work Flexibility (AUSTIN)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
**This position supports hybrid work schedule depending on organization needs.**

How will you make an impact?

We are looking for a Principal Thermal Rack Engineer within the Intelligent Infrastructure Segment to drive advanced cooling solutions for high-performance computing systems. This role involves incorporating thermal components such as direct liquid cooling (DLC) systems, coolant distribution units (CDUs), and manifolds into network and server racks (EIA 19” and ORv3). You will leverage CFD tools to perform rack and system-level thermal and fluid analysis, ensuring optimal flow distribution, pressure drop, and temperature performance. Additionally, you will create 3D CAD designs for seamless hardware integration, lead validation testing, and resolve thermal or flow issues through root cause analysis and corrective actions. Collaboration with cross-functional teams, customers, and global vendors is essential to align thermal architectures with overall system design and international standards.

What will you do?

- Lead the end-to-end integration and testing of rack thermal solutions, including liquid cooling systems in varying form factors and product lines.
- Use CFD tools (FloTherm or Macroflow) to perform switch, rack, and system-level thermal/fluid analysis (flow distribution, pressure drop, and temperature profiling).
- Design and optimize thermal components using 3D CAD (Creo or SolidWorks) to support seamless hardware integration and testing.
- Participate in customer engagements and site visits to understand and document deployment constraints and gather feedback for design improvements.
- Partner with factory teams to ensure racks are built with proper airflow, hose routing, and thermal safeguards, while establishing best practices that improve build consistency across deployments.
- Collaborate with Architects/Compliance/Reliability and global vendors to align thermal architectures with total system design and international data center/thermal/mechanical standards (e.g., UL, OCP, ASHRAE, ISTA, ASTM, NEBS).
- Conduct thermal, mechanical, and reliability testing, analyzing airflow, coolant flow rates, pressure drops, and structural integrity to ensure compliance with the end-users’ specifications.
- Develop and maintain design documentation including BOMs, wetted materials compliance, test plans, and engineering change orders (ECOs).
- Manage relationships with mechanical/thermal component vendors to build out a robust partner ecosystem consisting of racks, CDUs, hoses, manifolds, QDs, and cold plates.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (e.g., in-row cooling, in-rack cooling, rear door heat exchangers).
- Conduct root cause analysis and corrective actions for mechanical and thermal failures or field issues.
- May perform other duties and responsibilities as assigned.

How will you get here?

Education:

- Bachelor’s Degree in Mechanical/Thermal Engineering, Systems Engineering, or related field is required

Experience:

- Minimum of 7+ years of experience in thermal/mechanical systems integration
- 3+ years of specific experience in rack-scale thermal design and analysis
- Strong understanding of mechanical systems, integration strategies, and large-scale program management
- Familiarity with server design, heatsinks, cold plates, hoses, and blind-mate connectors
- Proficiency in CFD simulation (e.g. ANSYS, 6Sigma, etc.) and 3D modeling software (e.g. SolidWorks, Creo)
- Hands-on experience with thermal chambers, fans, and coolant
- Excellent English communication skills (verbal and written) with strong technical leadership capabilities

Knowledge, Skills, Abilities:

- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Capable of assessing projects, articulating risks, and developing project milestones
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management and customers
- Capable of influencing others and sharing best practices
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Ability to travel both domestically and internationally up to 30%

Preferred Qualifications: 

- Master’s Degree in Mechanical Engineering, Systems Engineering or related field is preferred
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license preferred.
- Hands-on experience with prototype fabrication and testing; experience working with global suppliers and contract manufacturers a plus.

About Jabil’s Intelligent Infrastructure Group:

- Headquartered in Austin, TX, with a flagship facility located near The Domain and the Austin FC stadium
- Growing rapidly, with a team of more than 100 employees in Austin (500+ worldwide) and significant expansion planned through 2026
- Generated over $12 billion in FY25 revenue, driven largely by partnerships with major hyperscale customers
- Delivers cutting‑edge engineering, supply chain, and manufacturing solutions that power the world's AI infrastructure and global data center ecosystems

As part of the total rewards package, this position is eligible for:

- Annual bonus opportunity
- Medical, dental, and vision insurance plans
- Paid time off (PTO)
- 4 weeks of paid parental leave
- 11 company-paid holidays (9 fixed holidays and 2 optional floating holidays), subject to change yearly
- 401(k) retirement plan
- Employee stock purchase plan
Remote working/work at home options are available for this role.
temporary
Senior Engineer, Global Services - Hybrid
Salary not disclosed
Medina, Hybrid 6 days ago
DivIHN (pronounced “divine”) is a CMMI ML3-certified Technology and Talent solutions firm.

Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.

Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.

Visit us at to learn more and view our open positions.

Please apply or call one of us to learn more For further inquiries about this opportunity, please contact one of our Talent Specialists, Hema, at (63 or Sri Balan at (63 Title: Senior Engineer, Global Services
- Hybrid Location: Medina, NY Duration: 12 Months Hours: 9 AM
- 5 PM Flexible on availability to be on-site, with someone who can work 1-2 days per week, Open to relocation and considering senior candidates.

must have the ability to travel Only W2 candidates are eligible for this position.

Third-party or C2C candidates will not be considered.

Description: Summary: Applies a solid understanding of engineering and problem-solving theories/practices toward the development of new or enhanced products or processes.

Creates service deliverables and infrastructure required to support initial product launch and lifecycle management.

Capable of designing machine tooling, jigs, fixtures, gauges and equipment used in the servicing process.

Capable of checking designs and drawings against general standards, design requirements, geometric tolerances, drafting practices and the manufacturing process involved.

The work of the individual should be highly creative, of high quality and offer wide latitude for independent judgment and perception with a minimal amount of supervision.

Need not have any tools/ software experience, CAD would be a plus.

Medical background will be a plus any regulatory background will be good.

Someone who was worked with Engineers, multitasking will be a great fit.

Ambiguity, adapt, multi-task and works with lead engineer in projects.

Support the team of Product core and represent service operations and supply chain.

Will be in charge of Service change implementation.

Focuses on design changes, process changes.

Collaborates with Service Process, Engineers, Technicians, impact of changes.

Oversees Document Revision, Handle Change control, mentored and directed by team to tackle multiple product and project Essential Duties and Responsibilities: 1.

Creates new product development and lifecycle management service deliverables throughout the product lifecycle for medical device products involving hardware.

2.

Supports new product platform releases.

Develops and implements service training, test equipment, tools, spare parts, and service manuals / instructions.

3.

Evaluates / makes recommendations on product releases related to design for serviceability.

Creates (or modifies existing) servicing processes and manuals to support repair or refurbishment of fielded product at multiple global sites or in the field.

4.

Works closely with design team to select, develop, and implement technologies across all medical device development programs.

5.

Analyzes key servicing metrics to identify and implement opportunities for improvement in service process quality, cost, or product reliability.

6.

Coordinates information flow between corporate and local/regional teams.

7.

Owns Corrective and Preventive Actions related to the product(s) core team(s) supported, using sound root cause analysis.

8.

May represent Technical Services on new product development and/or lifecycle management core teams.

9.

May independently plan, schedule and lead cross-functional teams in detailed phases of the engineering work in a project.

10.

May approve the work of lower level engineers; may supervise other engineers or technicians Minimum Qualifications: 1.

Must be well versed in core engineering disciplines (e.g.

mechanical, electrical, software, systems engineering).

2.

Highly motivated self-starter who is able to work with minimal supervision.

3.

Must have good interpersonal and oral/written communication skills, good time management, and be capable of analyzing and solving technical problems through innovative thought and application of sound engineering principles and root cause analysis.

4.

Experience with change control methodologies and configuration management principles is a plus.

5.

Experience with test engineering and/or reliability engineering principles is a plus.

6.

Ability to exercise independent judgment and draw conclusions based on available information.

7.

Good understanding of GMP and quality system requirements.

Education and/or Experience: Bachelor's degree in a core engineering discipline (mechanical, electrical, software, systems, or mfg/process engineering) plus 3-5 years of experience.

Medical device experience or other regulated industry experience preferred.

Experience in the use of Lean Six Sigma tools highly desirable.

About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.

The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.

DivIHN is an equal opportunity employer.

DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.

GMP, Medical Device, Lean Six Sigma
Remote working/work at home options are available for this role.
Not Specified
jobs by JobLookup
All jobs loaded