Engineering Structures Impact Factor Jobs in Hartford Remote
1,053 positions found
CNC Trainer & Lathe Machinist
Salary not disclosed
Position Overview: We are seeking an experienced CNC Trainer with expertise in CNC machining and operation of Turning processes.
The ideal candidate will have 2-3 years of training or leadership experience, with a preference for at least 2 years of hands-on training.
This role involves leading students through an in-depth course that combines classroom instruction with practical, hands-on training.
When not engaged in training activities, the individual will set-up/operate machinery and serve as a subject matter expert on the manufacturing floor, providing guidance to apprentices and ensuring optimal production processes.
This role is 100% in office at our plant in East Hartford, CT.
At HORST we offer a variety of benefits including but not limited to: Competitive PTO PackagePaid Company Holidays401K Match ProgramMedical, Dental, Vision BenefitsTuition Reimbursement/Assistance Program Key Responsibilities: Training and Development:Design and deliver comprehensive training programs covering CNC machining disciplines.
Conduct both classroom and hands-on training sessions, ensuring that students gain a thorough understanding of CNC machining principles and practices.Assess trainees' performance, provide constructive feedback, and implement improvement plans as needed.Stay updated with the latest advancements in CNC technology and integrate relevant updates into the training curriculum.
Mentorship and Support:Act as a subject matter expert on the manufacturing floor, providing guidance and support to apprentices and less experienced machinists.
Foster a collaborative and inclusive learning environment, encouraging knowledge sharing and continuous improvement.Author engineering change notices to enhance production, aligning with best practices for CNC operationsAuthor work instruction, work aids, and associated training aids that improve operator effectiveness when performing their duties.
Machining Operations:Set up, program, and operate CNC machines according to operational work instructions and specifications.
Interpret technical drawings, blueprints, and CAD models to determine machining requirements.Perform routine maintenance and troubleshooting of CNC equipment to ensure optimal performance.Monitor machining processes, make necessary adjustments, and ensure adherence to quality standards.Document any inefficiencies in the process, issuing change notices to engineering or programming for issue resolution or process corrections.
Qualifications: High school diploma or equivalent; additional technical certifications or an associate degree in a related field is preferred.
At least 2 years of experience in training or leadership role, with a preference for candidates who have conducted hands-on training.
Minimum of 5 years of hands-on experience in CNC machining, with proficiency in turning, Swiss Turning, Mill-turn, and milling, processes.
Strong understanding of CNC programming, setup, and operation.
Excellent communication and interpersonal skills, with the ability to convey complex information clearly and effectively.
Proficiency in reading and interpreting technical drawings and blueprints.
Commitment to safety protocols and quality standards in a manufacturing environment.
Ability to work collaboratively in a team setting and adapt to evolving training and production needs.
Physical Demands: Legend N (Not applicable) Activity is not applicable to this position O (Occasionally) Position requires this activity up to 33% of the time (0-2.5 hours/day) F (Frequently) Position requires this activity up to 66% of the time (2.5-5.5 hours/day) C (Constantly) Position requires this activity more than 66% of the time (5.5 hours/day) Lift/Carry 10-30lbs F Stand F Walk F Manually manipulate F Squat or kneel O Bend O Reach above shoulder O PI41afdb5-
The ideal candidate will have 2-3 years of training or leadership experience, with a preference for at least 2 years of hands-on training.
This role involves leading students through an in-depth course that combines classroom instruction with practical, hands-on training.
When not engaged in training activities, the individual will set-up/operate machinery and serve as a subject matter expert on the manufacturing floor, providing guidance to apprentices and ensuring optimal production processes.
This role is 100% in office at our plant in East Hartford, CT.
At HORST we offer a variety of benefits including but not limited to: Competitive PTO PackagePaid Company Holidays401K Match ProgramMedical, Dental, Vision BenefitsTuition Reimbursement/Assistance Program Key Responsibilities: Training and Development:Design and deliver comprehensive training programs covering CNC machining disciplines.
Conduct both classroom and hands-on training sessions, ensuring that students gain a thorough understanding of CNC machining principles and practices.Assess trainees' performance, provide constructive feedback, and implement improvement plans as needed.Stay updated with the latest advancements in CNC technology and integrate relevant updates into the training curriculum.
Mentorship and Support:Act as a subject matter expert on the manufacturing floor, providing guidance and support to apprentices and less experienced machinists.
Foster a collaborative and inclusive learning environment, encouraging knowledge sharing and continuous improvement.Author engineering change notices to enhance production, aligning with best practices for CNC operationsAuthor work instruction, work aids, and associated training aids that improve operator effectiveness when performing their duties.
Machining Operations:Set up, program, and operate CNC machines according to operational work instructions and specifications.
Interpret technical drawings, blueprints, and CAD models to determine machining requirements.Perform routine maintenance and troubleshooting of CNC equipment to ensure optimal performance.Monitor machining processes, make necessary adjustments, and ensure adherence to quality standards.Document any inefficiencies in the process, issuing change notices to engineering or programming for issue resolution or process corrections.
Qualifications: High school diploma or equivalent; additional technical certifications or an associate degree in a related field is preferred.
At least 2 years of experience in training or leadership role, with a preference for candidates who have conducted hands-on training.
Minimum of 5 years of hands-on experience in CNC machining, with proficiency in turning, Swiss Turning, Mill-turn, and milling, processes.
Strong understanding of CNC programming, setup, and operation.
Excellent communication and interpersonal skills, with the ability to convey complex information clearly and effectively.
Proficiency in reading and interpreting technical drawings and blueprints.
Commitment to safety protocols and quality standards in a manufacturing environment.
Ability to work collaboratively in a team setting and adapt to evolving training and production needs.
Physical Demands: Legend N (Not applicable) Activity is not applicable to this position O (Occasionally) Position requires this activity up to 33% of the time (0-2.5 hours/day) F (Frequently) Position requires this activity up to 66% of the time (2.5-5.5 hours/day) C (Constantly) Position requires this activity more than 66% of the time (5.5 hours/day) Lift/Carry 10-30lbs F Stand F Walk F Manually manipulate F Squat or kneel O Bend O Reach above shoulder O PI41afdb5-
Not Specified
CNC Lead Machinist - 2nd Shift
✦ New 🏢 HORST ENGINEERING & MANUFACTURING CO
Salary not disclosed
Job Summary:
The 2nd Shift Production Supervisor leads a multi-department team of CNC Operators and Set-Up Operators, in a high mix / low volume aerospace component manufacturing environment. This role is expected to balance expertise in set-up and operation of CNC machining for precision tolerance components, along with strong interpersonal skills to motivate the team to work toward common goals and objectives. Key responsibilities include managing the day-to-day priorities for multiple departments, cross-training staff on best practices to meet set-up and production run-times, optimizing processes through the elimination of waste, and leading lean continuous improvement initiatives. As a working supervisor, this role is expected to run production jobs and provide the necessary supervisory management to a small 2nd shift team.
This role is 100% in office at our plant in East Hartford, CT.
At HORST we offer a variety of benefits including but not limited to:
- Competitive PTO Package
- Paid Company Holidays
- 401K Match Program
- Medical, Dental, Vision Benefits
- Tuition Reimbursement/Assistance Program
Essential Job Duties:
- Conduct security, quality and EH&S audits to ensure the safety of employees on the second shift, and compliance with company and customer policies.
- Coordinate time-off requests, with attention to skills matrix, to ensure adequate staffing level across all disciplines of machine centers to meet production needs.
- Motivate team to meet daily, weekly and monthly goals and objectives. Identify waste and non-value-added tasks that interfere with objectives.
- Routinely measure, monitor, and publish the performance of all individuals on the team. Compare results against department standards. Complete periodic performance evaluations, and correct any issues in real time as needed, up to and including, disciplinary actions if needed.
- Host a daily GEMBA walk and serve as the primary conduit for all communications between operators and cross functional teams. Attend production meetings, and quality clinic/MRB meetings as needed. Collaborate with engineering, purchasing, production and sales teams to drive open issues to rapid closure.
- Partner with production control to stage daily and weekly priorities. Ensure jobs are completed on time, and productivity is sustained. Expedite jobs as necessary.
- Set-up and operate CNC machines according to operation sheet instructions. Provide technical support for team.
- Maintain ERP data integrity ensuring job punches match traveler package. Report any discrepancies that could impact job quantity or delivery.
- Develop and author standard work for the operation of production equipment. Coach and train teammates in best practices, enforcing safety, departmental and QMS polices, with the goal of process improvement, reduction in set up time, faster productivity rates, and improved quality.
Experience & Skills:
- Minimum of 10 years progressive career in the manufacturing of precision machined components in a regulated industry such as aerospace or medical. Previous experience in a high mix, low volume shop with an emphasis on lean manufacturing preferred.
- Working knowledge of ISO/AS quality standards, basic OSHA/EHS safety regulations, and a commitment to adherence of company policies.
- Advanced or expert machining skills in 1 or more disciplines. Swiss lathe, multi-axis turning, turning, milling, or grinding. Must be able to independently set-up and operate CNC equipment and provide the necessary training to others on shift.
- Experience leading and managing a small team toward common goals. An effective communicator that can build rapport with a diverse team. Previous team lead experience preferred.
- A willingness to take accountability for self and team, driving and inheriting the collective results of a department or team.
- High degree of urgency to drive operations at full speed. Keen sense of attention to detail to understand how to work with pace, not haste, avoiding careless mistakes.
- Strong understanding of operational metrics such as first past yield, efficiency, WIP aging, on-time-delivery, job cost, scrap rate, etc.
- Strong computer skills especially related to navigating ERP systems, job clocking systems, CAD/CAM software, and Microsoft products such Outlooks, Excel, PowerPoint, etc. Previous experience with EPICOR a plus.
Physical Demands:
Legend
N (Not applicable)
Activity is not applicable to this position
O (Occasionally)
Position requires this activity up to 33% of the time (0-2.5 hours/day)
F (Frequently)
Position requires this activity up to 66% of the time (2.5-5.5 hours/day)
C (Constantly)
Position requires this activity more than 66% of the time (5.5+ hours/day)
Lift/Carry 10-30lbs
F
Stand
F
Walk
F
Manually manipulate
F
Squat or kneel
O
Bend
O
Reach above shoulder
O
PIcdef49d468
Not Specified
T
Quality Manager
✦ New
Salary not disclosed
Job Title: Quality Manager
Location: Fully Onsite in Farmington CT
Type: Direct Hire
Salary: $160-180K DOE Plus Bonus and Excellent Benefits
Summary
The Quality Manager leads the Quality organization across multiple facilities to ensure best-in-class performance, regulatory compliance, and operational excellence. This role is responsible for the oversight and continuous improvement of the Quality Management System (QMS), ensuring alignment with customer, FAA, industry, and company requirements.
Partnering closely with Manufacturing, Engineering, and Leadership, the Quality Manager establishes and maintains quality processes, standards, and controls that support production and drive defect prevention, risk mitigation, and cost-of-quality reduction. The role also ensures audit readiness, contract review compliance, and the development of a strong quality culture through effective training, performance management, and cross-functional collaboration.
Responsibilities
Quality Management System (QMS) Ownership & Governance
- Serve as the management representative responsible for ensuring the Quality Management System (QMS) is established, implemented, maintained, and reported in accordance with applicable standards and customer requirements.
- Develop, implement, and maintain Standard Operating Procedures (SOPs), program instructions, and quality processes.
- Proactively design and maintain robust systems to control all factors that may impact product or service quality.
- Maintain required records and documentation to ensure effective operational control and regulatory compliance.
- Recommend and communicate organizational policies and procedures aligned with industry best practices.
Quality Leadership & Operational Oversight
- Direct and manage quality team functions including inspection, material review board (MRB), final inspection, and related quality activities to support production.
- Provide technical oversight and leadership to manufacturing and engineering teams on quality initiatives.
- Interface with production personnel to address quality matters and ensure customer and compliance requirements are consistently met.
- Identify and promote cross-training opportunities to strengthen team capability and performance.
- Balance compliance requirements with operational and business objectives to support overall company performance.
Compliance, Audit & Risk Management
- Act as the primary point of contact for internal and external audits, including audit preparation, execution, and corrective action follow-up.
- Ensure compliance with customer, regulatory, and industry standards.
- Promote safe work practices and ensure adherence to OSHA, environmental, and health and safety regulations.
Customer & Contract Review
- Conduct technical reviews of customer contracts, specifications, and data packages to ensure quality and inspection requirements are clearly defined and achievable.
- Provide input on inspection methods and acceptance criteria.
- Communicate program status, risks, issues, and quality performance to leadership and key stakeholders.
Data Analysis & Continuous Improvement
- Analyze quality and operational data to assess performance, identify trends, and drive corrective and preventive actions.
- Lead and participate in Kaizen and Lean improvement initiatives to enhance quality, efficiency, and effectiveness.
Additional Responsibilities
- Perform other duties within the scope and skill level of the role to support departmental and organizational objectives.
Required Qualifications
- Bachelor’s degree in Engineering, Manufacturing, Quality, or related technical discipline.
- Minimum 8+ years of progressive experience in quality and/or manufacturing engineering within a regulated industry, including aerospace.
- Minimum 5+ years of leadership experience managing quality teams (inspection, MRB, final inspection, etc.).
- Demonstrated ownership of a Quality Management System (QMS), including implementation, maintenance, and reporting.
- Experience supporting or leading compliance to one or more of the following standards: AS9100, ISO 9001, ISO 14001, NADCAP, PPAP, FAA regulations.
- Proven experience leading internal and external audits, including corrective action development and closure.
- Strong background in contract review, technical specification interpretation, and inspection method development.
- Experience leading structured continuous improvement initiatives (Lean, Six Sigma, Kaizen, or similar methodologies).
- Strong analytical capability with demonstrated ability to interpret data, identify trends, mitigate risk, and drive corrective/preventive actions.
- Working knowledge of NDT processes, mechanical testing methods, calibration systems, and supplier quality controls.
- Proficiency with Microsoft Office and manufacturing ERP systems (JobBOSS or similar).
- Strong written and verbal communication skills, with the ability to clearly communicate risks, performance metrics, and program status to leadership and customers.
- Demonstrated ability to influence cross-functional teams, balance compliance with operational objectives, and lead without direct authority.
Preferred Qualifications
- Master’s degree in Engineering, Quality, or Business-related discipline.
- Lean Six Sigma Black Belt or equivalent certification.
- Extensive hands-on experience managing AS9100-certified QMS within aerospace manufacturing.
- Experience interacting directly with customers and regulatory bodies during audits and corrective action processes.
- Experience scaling quality systems to support growth, new contracts, or new product introduction.
Not Specified
A
General Plumber
Salary not disclosed
Pay: $35.00 $43.00 / hour
The pay listed is the salary range for this position. Any specific offer will vary based on the successful applicant's education, experience, skills, abilities, geographic location, and alignment with market data. You may be eligible to participate in a Company incentive or bonus program.
Benefit Information: Local 32BJ Union Benefits
Position Summary:
The Plumber is responsible for performing a wide variety of plumbing tasks, including inspection, upkeep, and repair in a safety-conscious and team-oriented environment. This role is based on a single campus, with no travel required, offering stability and consistency for experienced professionals seeking a long-term opportunity. The candidate will need to have a general understanding of mechanical, plumbing, electrical, painting, and housekeeping of mechanical areas.
At ABM, our respect for team members comes with a commitment to a diverse workforce, making us a leader in our industry. Enjoy clear career growth programs and support. In return for your expertise, youll benefit from excellent training, industry-leading benefits, and unlimited opportunities to learn and grow.
Required Certifications: P1 or P2 Plumbing Certification.
Essential Functions
- Troubleshoots minor maintenance problems involving plumbing, and equipment repair or replacement.
- Performs routine plumbing repairs such as unstopping toilets, sinks or urinals, fixing water leaks, leaking faucets, and water fountains.
- Completes assigned preventive maintenance and reactive maintenance.
- Responsible for housekeeping of mechanical areas as well as other equipment, systems or structures
- Installs, repairs, and maintains pipes, valves, fittings, drainage systems, and fixtures
- Maintains, repairs and makes new installations of water, air steam, and sewage systems plant wide.
- Responds to, diagnoses, and resolves plumbing emergencies
- Performs routine inspections of plumbing and drainage systems
- Perform other duties as assigned.
- Willingness to Work at Various Heights: The ideal candidate must be comfortable working in elevated environments. This includes tasks that may require being at different heights for extended periods.
- Ladder Climbing: Regular climbing of ladders is a critical part of this position. The candidate must be capable of safely ascending and descending ladders of various sizes and types.
- Utilizing Various Lifts: Proficiency in operating a range of lifts is essential. This involves maneuvering scissor lifts, boom lifts, and other mechanical devices to reach higher areas
Minimum Education and/or Experience Requirements
- High School Diploma / GED
- Required Certifications: P1 or P2 Plumbing Certification.
- 3-5 years demonstrated combined plumbing and pipe fitting experience in a commercial or industrial setting
- Must be familiar with Standard Gas and Plumbing Codes and Standard Building Codes.
- Read, interpret, and work from diagrams, blueprints, sketches, and repair manuals.
- Must be authorized to work in the US.
#500
About Us
ABM (NYSE: ABM) is one of the worlds largest providers of facility services and solutions. A driving force for a cleaner, healthier, and more sustainable world, ABM provides essential services and forward-looking performance solutions that improve the spaces and places that matter most. From curbside to rooftop, ABMs comprehensive services include janitorial, engineering, parking, electrical and lighting, energy and electric vehicle charging infrastructure, HVAC and mechanical, landscape and turf, and mission critical solutions. ABM serves a wide range of industries from commercial office buildings to universities, airports, hospitals, data centers, manufacturing plants and distribution centers, entertainment venues and more. Founded in 1909, ABM serves over 20,000 clients, with annualized revenue approaching $8 billion and more than 100,000 team members in 350+ offices throughout the United States, United Kingdom, Republic of Ireland, and other international locations. For more information, visit is proud to be an Equal Opportunity Employer qualified applicants without regard race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran or any other protected factor under federal, state, or local law. ABM is committed to working with and providing reasonable accommodation to individuals with disabilities. If you have a disability and need assistance in completing the employment application, please call 888-328-8606. We will provide you with assistance and make a determination on your request for reasonable accommodation on a case-by-case basis.
ABM participates in the U.S. Department of Homeland Security E-Verify program. E-Verify is an internet-based system used to electronically confirm employment eligibility.
ABM is a military-friendly company proudly employing thousands of men and women who have served in the U.S. military. With ABM, youll have access to a world-class training program and ample opportunities to use the skills you developed while serving our country. Whether youre looking for a frontline or professional position, you can find post-military career opportunities across ABM.
ABM directs all applicants to apply at ABM does not accept unsolicited resumes.
Required
Preferred
Job Industries
- Other
Not Specified
N
Senior Developer
🏢 nLeague
Salary not disclosed
Web accessibility developer Job Id: Digital Accessibility -Website Developer Client: CT DAS Duration: 06 Months Location: Remote, Hartford, CT.
Job Description: The State of Connecticut (CT) is seeking a Digital Accessibility Web Developer with deep experience in remediating accessibility issues across a wide range of platforms and technologies.
You will partner closely with our accessibility testers and analysts to turn accessibility audit findings into fully remediated digital experiences that meet or exceed compliance standards.
The ideal candidate will have expert-level experience remediating accessibility barriers in CMS systems such as Sitecore, Salesforce, and custom web applications (HTML/ARIA/CSS/JavaScript), as well as working knowledge of AWS services, Biznet platforms, and enterprise databases.
You will be hands-on in HTML and accessibility markup remediation, working primarily within the State's CMS platforms and custom HTML environments.
You'll partner with digital accessibility testers to review audit findings and make front end code corrections to ensure WCAG 2.1 AA compliance.
Remediation Focus Areas Apply accessibility fixes to front-end code and markup issues identified through audits (i.e.
color corrections, alt text, heading structure, keyboard navigation, link roles, ARIA roles) Modify and restructure HTML, CSS, and ARIA to comply with WCAG 2.1 AA standards Work within CMS platforms like Sitecore, Salesforce, and Wordpress to correct issues in templates, content types, and presentation layers Support content and design teams with accessibility guidance for remediating documents, forms, and embedded media Use defect tracking tools (JIRA) to manage tickets and document fixes Collaborate with accessibility testers and content strategists to validate remediated work and prevent recurrence of issues Share knowledge and remediation patterns with other developers to promote consistency and sustainability Required Knowledge, Skills, and Ability Bachelor's degree in Computer Science, Software Engineering, IT, or related field 4 years of experience remediating digital accessibility issues in websites, apps, and platforms Strong coding experience in HTML, CSS, JavaScript, and ARIA markup Working knowledge of Sitecore and Salesforce platforms, with demonstrated remediation success Familiarity with Biznet applications, AWS infrastructure, or common enterprise back-end platforms Ability to interpret automated and manual testing results (e.g., Axe, ANDI, NVDA, JAWS) and apply solutions Expert knowledge of WCAG 2.1 AA standards and assistive technology interactions Proficiency in CMS templates, JavaScript frameworks, backend API configuration, and UI component libraries Experience troubleshooting keyboard traps, focus management, form label/field logic, and responsive layouts Strong ability to work in agile sprints, manage remediation tickets, and track progress in Jira or similar tools Ability to collaborate with QA testers, content editors, and project managers in an agile environment Excellent communication and documentation skills for communicating fixes and coaching teams Preferred Skills and Qualifications Experience with Sitecore MVC or SXA customization Front-end developer or CMS certifications Accessibility remediation tools Experience with customized CMS themes, templates, and components Strong attention to content structure (heading levels, alt text, semantic HTML) Experience remediating PDF, Word, or PowerPoint documents (for secondary support) Familiarity with CI/CD integration of accessibility checks (i.e., axe-core in pipelines) Familiarity with design handoff tools (i.e., Figma or Adobe XD) for accessibility review Desired Certifications One or more of the following: IAAP WAS (Web Accessibility Specialist) strongly preferred IAAP CPACC DHS Trusted Tester Certification Deque University Developer Track Certificate Salesforce Accessibility Champion or similar Bachelor’s degree in computer science, or related field, Software Engineering, IT
Job Description: The State of Connecticut (CT) is seeking a Digital Accessibility Web Developer with deep experience in remediating accessibility issues across a wide range of platforms and technologies.
You will partner closely with our accessibility testers and analysts to turn accessibility audit findings into fully remediated digital experiences that meet or exceed compliance standards.
The ideal candidate will have expert-level experience remediating accessibility barriers in CMS systems such as Sitecore, Salesforce, and custom web applications (HTML/ARIA/CSS/JavaScript), as well as working knowledge of AWS services, Biznet platforms, and enterprise databases.
You will be hands-on in HTML and accessibility markup remediation, working primarily within the State's CMS platforms and custom HTML environments.
You'll partner with digital accessibility testers to review audit findings and make front end code corrections to ensure WCAG 2.1 AA compliance.
Remediation Focus Areas Apply accessibility fixes to front-end code and markup issues identified through audits (i.e.
color corrections, alt text, heading structure, keyboard navigation, link roles, ARIA roles) Modify and restructure HTML, CSS, and ARIA to comply with WCAG 2.1 AA standards Work within CMS platforms like Sitecore, Salesforce, and Wordpress to correct issues in templates, content types, and presentation layers Support content and design teams with accessibility guidance for remediating documents, forms, and embedded media Use defect tracking tools (JIRA) to manage tickets and document fixes Collaborate with accessibility testers and content strategists to validate remediated work and prevent recurrence of issues Share knowledge and remediation patterns with other developers to promote consistency and sustainability Required Knowledge, Skills, and Ability Bachelor's degree in Computer Science, Software Engineering, IT, or related field 4 years of experience remediating digital accessibility issues in websites, apps, and platforms Strong coding experience in HTML, CSS, JavaScript, and ARIA markup Working knowledge of Sitecore and Salesforce platforms, with demonstrated remediation success Familiarity with Biznet applications, AWS infrastructure, or common enterprise back-end platforms Ability to interpret automated and manual testing results (e.g., Axe, ANDI, NVDA, JAWS) and apply solutions Expert knowledge of WCAG 2.1 AA standards and assistive technology interactions Proficiency in CMS templates, JavaScript frameworks, backend API configuration, and UI component libraries Experience troubleshooting keyboard traps, focus management, form label/field logic, and responsive layouts Strong ability to work in agile sprints, manage remediation tickets, and track progress in Jira or similar tools Ability to collaborate with QA testers, content editors, and project managers in an agile environment Excellent communication and documentation skills for communicating fixes and coaching teams Preferred Skills and Qualifications Experience with Sitecore MVC or SXA customization Front-end developer or CMS certifications Accessibility remediation tools Experience with customized CMS themes, templates, and components Strong attention to content structure (heading levels, alt text, semantic HTML) Experience remediating PDF, Word, or PowerPoint documents (for secondary support) Familiarity with CI/CD integration of accessibility checks (i.e., axe-core in pipelines) Familiarity with design handoff tools (i.e., Figma or Adobe XD) for accessibility review Desired Certifications One or more of the following: IAAP WAS (Web Accessibility Specialist) strongly preferred IAAP CPACC DHS Trusted Tester Certification Deque University Developer Track Certificate Salesforce Accessibility Champion or similar Bachelor’s degree in computer science, or related field, Software Engineering, IT
Not Specified
Principal Mechanical Integration Engineer - DCI Pipes, Frames and Structures (REMOTE)
Salary not disclosed
Job Title : Principal Mechanical Design Engineer
Job Family : Mechanical Design Engineering
Organization : Data Center Infrastructure Team
Location : Remote* OR Austin, TX
*Requires up to 30% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
* Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
* Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
* Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
* Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
* Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
* Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
* Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
* Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
* Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
* Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
* Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
* Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
* Lead mechanical design reviews and contribute to cross-functional design validation efforts.
* Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
* Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
* Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
* Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
* Conduct root cause analysis and corrective actions for mechanical failures or field issues.
* Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
* Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
* May perform other duties and responsibilities as assigned
How will you get here?
Education :
* Bachelor's Degree in Mechanical Engineering or related engineering discipline.
Experience :
* 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
* Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
* Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
* Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
* Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
* Excellent interpersonal and communication skills
* Creative, self-motivated, accountable, and team-oriented
* Able to work independently with minimal oversight
* Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
* Skilled in writing reports, business correspondence, and procedural guides
* Effective at presenting information and responding to management, clients, and public queries
* Capable of influencing others and sharing best practices
* Comfortable working as part of a global team
* Capable of assessing projects, articulating risks, and developing project milestones
* Familiar with stage-gate processes in project lifecycle management (PLCM)
* Able to mentor less experienced engineers
* Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
* Master's Degree in Mechanical Engineering
* Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
* Active Professional Engineer (PE) license.
* Knowledge of regulatory and safety standards applicable to data center infrastructure.
* Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family : Mechanical Design Engineering
Organization : Data Center Infrastructure Team
Location : Remote* OR Austin, TX
*Requires up to 30% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
* Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
* Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
* Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
* Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
* Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
* Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
* Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
* Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
* Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
* Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
* Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
* Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
* Lead mechanical design reviews and contribute to cross-functional design validation efforts.
* Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
* Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
* Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
* Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
* Conduct root cause analysis and corrective actions for mechanical failures or field issues.
* Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
* Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
* May perform other duties and responsibilities as assigned
How will you get here?
Education :
* Bachelor's Degree in Mechanical Engineering or related engineering discipline.
Experience :
* 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
* Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
* Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
* Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
* Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
* Excellent interpersonal and communication skills
* Creative, self-motivated, accountable, and team-oriented
* Able to work independently with minimal oversight
* Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
* Skilled in writing reports, business correspondence, and procedural guides
* Effective at presenting information and responding to management, clients, and public queries
* Capable of influencing others and sharing best practices
* Comfortable working as part of a global team
* Capable of assessing projects, articulating risks, and developing project milestones
* Familiar with stage-gate processes in project lifecycle management (PLCM)
* Able to mentor less experienced engineers
* Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
* Master's Degree in Mechanical Engineering
* Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
* Active Professional Engineer (PE) license.
* Knowledge of regulatory and safety standards applicable to data center infrastructure.
* Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
permanent
Lead Mechanical Systems Engineer - Remote Structures and Integration (AUSTIN)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Mechanical Design Engineer
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 30% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 30% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
temporary
Principal Mechanical Integration Engineer – DCI Pipes, Frames and Structures (REMOTE) (AUSTIN)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Mechanical Design Engineer
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
temporary
Senior Mechanical Systems Engineer - Remote Structures and Piping (AUSTIN)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Mechanical Design Engineer
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
temporary
Principal Mechanical Integration Engineer – DCI Pipes, Frames and Structures (REMOTE) (WASHINGTON)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Mechanical Design Engineer
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
temporary
jobs by
✓ All jobs loaded