Engineering Structures Jobs in Fulshear Tx Flexible
429 positions found — Page 3
C
Controls Engineer
Salary not disclosed
Job Duties:
• Control system design for industrial refrigeration systems to customer or internal specifications.
• Create electrical and control design documents (electrical layouts, wiring diagrams, system architecture, BOM, etc.) from P&ID.
• Review electrical drawings for correctness.
• Produce FAT (Factory Acceptance Test) documents.
• Write new and modify existing PLC software and HMI software.
• Coordinate with customers to integrate PLC software with customer DCS/SCADA.
• Provide customer support on existing installations.
• Commissioning and startup support at customer sites as needed.
• Other duties as assigned..
Requirements:
• Proficiency with Allen Bradley programming software (Studio5000 PLC programming, FactoryTalk HMI programming).
• Proficiency with CodeSys, Siemens TIA Portal, Ignition, optional.
• Familiarity with AutoCAD Electrical.
• Knowledge of Modbus and Ethernet/IP communication protocols.
• Knowledge of basic IP network configuration.
• Strong oral and written communication skills.
• Must be able to work in a team environment.
• Proactive, positive, professional, team-minded, and self-motivating.
• Must be able to travel up to 30% annually.
Education and Experience:
• BSEE, or Equivalent technical degree w/experience, in related STEM discipline required.
• Experience in controls engineering in the industrial refrigeration market is desired.
• Experience with modern revision control systems (git, Copia, etc) desired.
Physical Requirements:
• Prolonged periods sitting at a desk and working on a computer.
• Must be able to lift up to 15 pounds at times
Not Specified
T
Manufacturing Engineer
Salary not disclosed
Job Title: Manufacturing Engineer
Location: Katy, TX (On-Site)
Experience Level: 5+ Years
Education Required: Bachelor’s Degree in Industrial, Manufacturing, orMechanical Engineering
Job Summary:
We are seeking a skilled and motivated Manufacturing Engineer to join our team This on-site position is ideal for a professional with 5+ years of experience in manufacturing. You will play a key role in optimizing production processes, improving quality, and driving efficiency in the design and manufacturing of solar products.
Key Responsibilities:
- Analyze and optimize manufacturing processes for products to improve efficiency, quality, and cost-effectiveness
- Develop and implement lean manufacturing principles, including process flow, layout design, and time studies
- Collaborate with design, production, and quality teams to resolve engineering and manufacturing issues
- Identify opportunities for automation, tooling improvements, and process enhancements
- Lead continuous improvement initiatives using Six Sigma or other quality methodologies
- Support new product introductions by developing and validating manufacturing processes and work instructions
- Monitor KPIs and recommend corrective actions as needed
- Ensure compliance with safety, environmental, and regulatory requirements
Qualifications:
- Bachelor’s degree in Industrial, Manufacturing. or Mechanical Engineering (required)
- Minimum of 5 years of experience in an industrial or manufacturing engineering role, preferably with solar products
- Strong knowledge of lean manufacturing, Six Sigma, and process optimization tools
- Hands-on experience with ERP systems, CAD tools, and production documentation
- Excellent problem-solving skills and attention to detail
- Strong communication and collaboration abilities
- Ability to work independently and on-site full time in the Katy area
Not Specified
W
Production Operator Lead
Salary not disclosed
Location: 2439 Discovery Hills Parkway, Brookshire, TX 77423
Shift: 12 hour shifts - day or night shifts available 6:00 to 6:00 following an ON/OFF pattern. 3 on, 2 off, 2 on, 3 off.
Job Summary Statement:
The Production Operator Lead will play a pivotal role in overseeing and coordinating production activities within our solar panel manufacturing facility. This position requires a hands-on leader who can drive production efficiency, maintain high standards of quality and safety, and help to build a highly motivated and productive team.
Essential Job Duties and Responsibilities:
- Provides daily guidance to a team of production operators and technicians to ensure smooth and efficient daily operations
- Plans and prioritizes production tasks to meet production targets and deadlines. Ensure that all activities align with production schedules and quality standards.
- Monitors production and equipment performance to identify and address minor issues and appropriately escalate any issue that may impact efficiency, quality, or safety.
- Provides on-the-job training and support the rapid onboarding of team members. Foster a culture of continuous improvement by encouraging skill development and knowledge sharing.
- Implements and enforces quality control procedures to ensure that all products meet or exceed company standards and customer expectations.
- Promotes and maintains a safe working environment by adhering to safety protocols and ensuring that all team members follow safety guidelines.
- Troubleshoots and resolves production issues, collaborating with other departments such as Maintenance, Engineering, and Quality Assurance as needed.
- Maintains accurate production records and reports. Analyze production data to identify trends and areas for improvement.
- Drives initiatives to optimize production processes, reduce waste, and enhance overall efficiency.
- Performs other related duties as assigned.
Minimum Requirements and Qualifications:
- High school diploma or equivalent. An associate degree or relevant technical certification is a plus.
- Minimum of 3 years of experience in a production or manufacturing environment, with at least 1 year in a lead or supervisory role.
- Strong leadership and interpersonal skills with the ability to motivate and manage a team. Proficiency in manufacturing processes and equipment, quality control, and safety standards.
- Familiarity with production software and systems. Ability to troubleshoot mechanical and technical issues.
- Excellent analytical and problem-solving skills with a proactive approach to identifying and addressing challenges.
- Strong verbal and written communication skills, with the ability to effectively convey information and instructions to team members.
- Able and willing to learn (interface with machine control panels, recognize quality, perform data analytics, troubleshoot issues and problem-solve
- Proficiency in English language skills.
- Physical Requirements: o Ability to work in a manufacturing environment, including standing and walking for up to 12 hours per day.
- Ability to lift, push or pull up to 30 lbs.
- Ability to stoop, kneel, bend on occasional basis
- Ability to reach above shoulder and below waist frequently
- Required to use hands to grasp, lift, handle, carry or feel objects repetitively on a frequent basis
- 20/40 vision in each eye (with or without correction) and the ability to distinguish between red, yellow, and green is required
Not Specified
A
Inpatient Psychiatrist {167707}
Salary not disclosed
A-Line Staffing is now hiring an Inpatient Psychiatrist in Richmond, TX and Rusk, TX ! The Inpatient Psychiatrist will be working for a respected healthcare organization and has career growth potential.
See additional details below.
Inpatient Psychiatrist Highlights • The pay for this position is $240,000 – $350,000 per year , depending on location and experience.
• Monday–Friday | 7:00 AM – 4:00 PM schedule • Onsite position • This position is a Direct Hire opportunity.
Responsibilities • Provide direct psychiatric care to assigned patients within an inpatient correctional healthcare setting.
• Conduct psychiatric, physical, and neurological evaluations for patients.
• Participate in civil commitment proceedings when appropriate for patients being released from custody.
• Provide clinical supervision to psychiatric mid-level practitioners as assigned.
• Conduct and participate in due process proceedings related to voluntary admissions and compelled psychoactive medication.
• Participate in psychiatry quality improvement and quality management programs.
• Provide emergency psychiatric call coverage when required.
• Work collaboratively with utilization review and care management processes.
• Maintain compliance with internal policies, procedures, and reporting structures.
• Complete additional related duties as assigned.
Work Environment • Work is performed within a prison, jail, or juvenile detention center environment .
• Security clearance and pre-employment drug screening are required.
Requirements • Current license to practice medicine from the Texas State Board of Medical Examiners .
• Eligibility for Board Certification in Psychiatry .
• Current DEA controlled substances registration .
• Ability to work within a structured correctional healthcare environment.
Preferred Qualifications • 2+ years of psychiatric experience .
• Experience utilizing digital medical systems .
Benefits Available • Benefits are available to full-time employees after 90 days of employment.
• A 401(k) with a company match is available for full-time employees with 1 year of service on our eligibility dates.
If you are interested in this Inpatient Psychiatrist position, APPLY , or contact .
See additional details below.
Inpatient Psychiatrist Highlights • The pay for this position is $240,000 – $350,000 per year , depending on location and experience.
• Monday–Friday | 7:00 AM – 4:00 PM schedule • Onsite position • This position is a Direct Hire opportunity.
Responsibilities • Provide direct psychiatric care to assigned patients within an inpatient correctional healthcare setting.
• Conduct psychiatric, physical, and neurological evaluations for patients.
• Participate in civil commitment proceedings when appropriate for patients being released from custody.
• Provide clinical supervision to psychiatric mid-level practitioners as assigned.
• Conduct and participate in due process proceedings related to voluntary admissions and compelled psychoactive medication.
• Participate in psychiatry quality improvement and quality management programs.
• Provide emergency psychiatric call coverage when required.
• Work collaboratively with utilization review and care management processes.
• Maintain compliance with internal policies, procedures, and reporting structures.
• Complete additional related duties as assigned.
Work Environment • Work is performed within a prison, jail, or juvenile detention center environment .
• Security clearance and pre-employment drug screening are required.
Requirements • Current license to practice medicine from the Texas State Board of Medical Examiners .
• Eligibility for Board Certification in Psychiatry .
• Current DEA controlled substances registration .
• Ability to work within a structured correctional healthcare environment.
Preferred Qualifications • 2+ years of psychiatric experience .
• Experience utilizing digital medical systems .
Benefits Available • Benefits are available to full-time employees after 90 days of employment.
• A 401(k) with a company match is available for full-time employees with 1 year of service on our eligibility dates.
If you are interested in this Inpatient Psychiatrist position, APPLY , or contact .
Not Specified
Aviation Electrician's Mate
Salary not disclosed
Job Title : Aviation Electronics, Electrical & Computer Systems Technician (AE/AT) Category / Component : Enlisted • Active Overview Aviation Electronics, Electrical and Computer Systems Technicians keep Navy aircraft mission ready by maintaining, troubleshooting, and repairing the electrical power, avionics, and computer based systems that enable radar, communications, navigation, flight controls, and weapons at sea and ashore.
Qualified Sailors may also volunteer as Naval Aircrewmen and perform in flight systems operations and mission support.
Key Responsibilities Troubleshoot and repair complex aircraft systems including digital computers, fiber optics, radar, laser electronics, infrared detection, and communications and navigation suites; maintain aircraft electrical power generation and distribution systems; test and calibrate aircraft instruments and automatic flight controls; perform micro miniature circuit card repair for qualified technicians; install modifications and upgrades to aircraft avionics and electrical systems; use diagnostic equipment and interpret schematics and wiring diagrams to restore systems to full mission capability.
What to Expect A mix of hands on flight line maintenance and bench diagnostics in hangars, avionics shops, and aboard aircraft carriers; frequent troubleshooting under time pressure to return aircraft to service; work around high tempo flight operations with rotating shifts, nights, and weekends while deployed; strict adherence to safety, tool control, foreign object damage prevention, tag out procedures, and quality assurance standards; opportunities to qualify as a work center leader or collateral duty inspector as you gain experience.
Work Environment Assignments with squadrons at naval air stations and aboard aircraft carriers worldwide; work in hangars, avionics labs, and outdoors on flight lines in all weather conditions and high noise environments; close teamwork with other aviation ratings and aircrew in a structured maintenance organization; potential temporary duty with detachments and deployments supporting carrier or expeditionary operations.
Pathways, Training & Advancement Recruit Training followed by Class A School in Pensacola, Florida, covering aviation theory, electrical systems, electronics fundamentals, and technical skills; assignment after A School into either the Aviation Electrician's Mate or Aviation Electronics Technician rating based on performance and Navy needs; advanced platform specific schools for particular aircraft and mission systems; opportunities to qualify for micro miniature repair and, for volunteers who qualify, to attend Naval Aircrew training.
Enlist for the Aviation Electronics and Electrical pipeline, with final placement into AE or AT after A School based on performance and service needs; qualified Sailors may later volunteer for Naval Aircrew duty after initial rating qualification and screening.
Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy.
Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter.
Additional qualifications for this job may include: United States citizenship and eligibility for a security clearance; normal color perception; interest in aviation and working around aircraft; strong aptitude in electronics, computers, and precision technical work; manual dexterity, good memory, and physical fitness sufficient to work safely on flight lines, in hangars, and on shipboard aircraft.
Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities.
Specific options depend on the Sailor's status, training, and current Navy policy.
Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options.
Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance.
Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed.
Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source.
Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community.
It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes.
Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.
Not Specified
W
High-Earning Remote Sales Representative
Salary not disclosed
Are you a results-driven sales professional ready to take full control of your income, schedule, and success?At Wholesale Payments, we're empowering ambitious Outside B2B Sales Executives to own their territory, dominate their market, and build lasting wealth in the rapidly growing fintech and merchant services industry.
What You'll Do
- Engage and consult with small and mid-sized business owners, offering best-in-class payment processing, POS, and business technology solutions
- Execute a proven B2B sales process — prospect, present, and close new accounts face-to-face
- Manage your own pipeline with full autonomy, supported by elite tools and a winning culture
- Build a residual income stream that grows month after month — every account you sign keeps paying you
- Become a trusted advisor to your clients — delivering value, savings, and partnership
What You'll Get
- Uncapped Commission Structure — earn what you're worth
- Lifetime Residuals — ongoing passive income on every account
- $15,000+ Fast-Start Bonus potential in your first 90 days
- Daily Qualified Leads so you can focus on closing, not chasing
- Exclusive Fintech Tools & CRM — built to help you win faster
- 45X Portfolio Buyout Option — turn your book into real equity
- Comprehensive Training, Mentorship & Closer Support
- 3-6 preset appointments each day!
What We're Looking For
- Proven B2B or outside sales track record (merchant services or fintech experience preferred)
- A fearless hunter mentality — you love prospecting and closing deals
- A "CLOSER" - Hybrid role with appointments that need to be closed!
- Entrepreneurial spirit with discipline and self-motivation
- Confident communicator who builds instant trust with business owners
- A go-getter who thrives in a performance-based environment
Why Wholesale Payments?
This isn't your typical sales gig — it's a career path toward true financial freedom. You'll be backed by one of the most respected names in the industry, equipped with world-class tools, and surrounded by a winning culture that rewards performance.
Job Type: Full-time
Pay: $85,000.00 - $185,000.00 per year
Benefits:
- Dental insurance
- Health insurance
- Paid time off
- Vision insurance
Experience:
- Outside sales: 2 years (Preferred)
- Direct sales: 1 year (Preferred)
- Sales: 4 years (Required)
- B2B sales: 2 years (Required)
Ability to Commute:
- Arizona (Required)
Work Location: Remote
Remote working/work at home options are available for this role.
Not Specified
W
Outside B2B Sales Executive (Uncapped Commissions | Lifetime Residuals | Real Freedom)
🏢 Wholesale Payments
Salary not disclosed
Are you a results-driven sales professional ready to take full control of your income, schedule, and success?At Wholesale Payments, we're empowering ambitious Outside B2B Sales Executives to own their territory, dominate their market, and build lasting wealth in the rapidly growing fintech and merchant services industry.
What You'll Do
- Engage and consult with small and mid-sized business owners, offering best-in-class payment processing, POS, and business technology solutions
- Execute a proven B2B sales process — prospect, present, and close new accounts face-to-face
- Manage your own pipeline with full autonomy, supported by elite tools and a winning culture
- Build a residual income stream that grows month after month — every account you sign keeps paying you
- Become a trusted advisor to your clients — delivering value, savings, and partnership
What You'll Get
- Uncapped Commission Structure — earn what you're worth
- Lifetime Residuals — ongoing passive income on every account
- $15,000+ Fast-Start Bonus potential in your first 90 days
- Daily Qualified Leads so you can focus on closing, not chasing
- Exclusive Fintech Tools & CRM — built to help you win faster
- 45X Portfolio Buyout Option — turn your book into real equity
- Comprehensive Training, Mentorship & Closer Support
- 3-6 preset appointments each day!
What We're Looking For
- Proven B2B or outside sales track record (merchant services or fintech experience preferred)
- A fearless hunter mentality — you love prospecting and closing deals
- A "CLOSER" - Hybrid role with appointments that need to be closed!
- Entrepreneurial spirit with discipline and self-motivation
- Confident communicator who builds instant trust with business owners
- A go-getter who thrives in a performance-based environment
Why Wholesale Payments?
This isn't your typical sales gig — it's a career path toward true financial freedom. You'll be backed by one of the most respected names in the industry, equipped with world-class tools, and surrounded by a winning culture that rewards performance.
Job Type: Full-time
Pay: $85,000.00 - $185,000.00 per year
Benefits:
- Dental insurance
- Health insurance
- Paid time off
- Vision insurance
Experience:
- Outside sales: 2 years (Preferred)
- Direct sales: 1 year (Preferred)
- Sales: 4 years (Required)
- B2B sales: 2 years (Required)
Ability to Commute:
- Arizona (Required)
Work Location: Remote
Not Specified
W
Remote B2B Sales Executive
🏢 Wholesale Payments
Salary not disclosed
Are you a results-driven sales professional ready to take full control of your income, schedule, and success?At Wholesale Payments, we're empowering ambitious Outside B2B Sales Executives to own their territory, dominate their market, and build lasting wealth in the rapidly growing fintech and merchant services industry.
What You'll Do
- Engage and consult with small and mid-sized business owners, offering best-in-class payment processing, POS, and business technology solutions
- Execute a proven B2B sales process — prospect, present, and close new accounts face-to-face
- Manage your own pipeline with full autonomy, supported by elite tools and a winning culture
- Build a residual income stream that grows month after month — every account you sign keeps paying you
- Become a trusted advisor to your clients — delivering value, savings, and partnership
What You'll Get
- Uncapped Commission Structure — earn what you're worth
- Lifetime Residuals — ongoing passive income on every account
- $15,000+ Fast-Start Bonus potential in your first 90 days
- Daily Qualified Leads so you can focus on closing, not chasing
- Exclusive Fintech Tools & CRM — built to help you win faster
- 45X Portfolio Buyout Option — turn your book into real equity
- Comprehensive Training, Mentorship & Closer Support
- 3-6 preset appointments each day!
What We're Looking For
- Proven B2B or outside sales track record (merchant services or fintech experience preferred)
- A fearless hunter mentality — you love prospecting and closing deals
- A "CLOSER" - Hybrid role with appointments that need to be closed!
- Entrepreneurial spirit with discipline and self-motivation
- Confident communicator who builds instant trust with business owners
- A go-getter who thrives in a performance-based environment
Why Wholesale Payments?
This isn't your typical sales gig — it's a career path toward true financial freedom. You'll be backed by one of the most respected names in the industry, equipped with world-class tools, and surrounded by a winning culture that rewards performance.
Job Type: Full-time
Pay: $85,000.00 - $185,000.00 per year
Benefits:
- Dental insurance
- Health insurance
- Paid time off
- Vision insurance
Experience:
- Outside sales: 2 years (Preferred)
- Direct sales: 1 year (Preferred)
- Sales: 4 years (Required)
- B2B sales: 2 years (Required)
Ability to Commute:
- Arizona (Required)
Work Location: Remote
Remote working/work at home options are available for this role.
Not Specified
W
Remote Sales Executive (B2B)
🏢 Wholesale Payments
Salary not disclosed
Are you a results-driven sales professional ready to take full control of your income, schedule, and success?At Wholesale Payments, we're empowering ambitious Outside B2B Sales Executives to own their territory, dominate their market, and build lasting wealth in the rapidly growing fintech and merchant services industry.
What You'll Do
- Engage and consult with small and mid-sized business owners, offering best-in-class payment processing, POS, and business technology solutions
- Execute a proven B2B sales process — prospect, present, and close new accounts face-to-face
- Manage your own pipeline with full autonomy, supported by elite tools and a winning culture
- Build a residual income stream that grows month after month — every account you sign keeps paying you
- Become a trusted advisor to your clients — delivering value, savings, and partnership
What You'll Get
- Uncapped Commission Structure — earn what you're worth
- Lifetime Residuals — ongoing passive income on every account
- $15,000+ Fast-Start Bonus potential in your first 90 days
- Daily Qualified Leads so you can focus on closing, not chasing
- Exclusive Fintech Tools & CRM — built to help you win faster
- 45X Portfolio Buyout Option — turn your book into real equity
- Comprehensive Training, Mentorship & Closer Support
- 3-6 preset appointments each day!
What We're Looking For
- Proven B2B or outside sales track record (merchant services or fintech experience preferred)
- A fearless hunter mentality — you love prospecting and closing deals
- A "CLOSER" - Hybrid role with appointments that need to be closed!
- Entrepreneurial spirit with discipline and self-motivation
- Confident communicator who builds instant trust with business owners
- A go-getter who thrives in a performance-based environment
Why Wholesale Payments?
This isn't your typical sales gig — it's a career path toward true financial freedom. You'll be backed by one of the most respected names in the industry, equipped with world-class tools, and surrounded by a winning culture that rewards performance.
Job Type: Full-time
Pay: $85,000.00 - $185,000.00 per year
Benefits:
- Dental insurance
- Health insurance
- Paid time off
- Vision insurance
Experience:
- Outside sales: 2 years (Preferred)
- Direct sales: 1 year (Preferred)
- Sales: 4 years (Required)
- B2B sales: 2 years (Required)
Ability to Commute:
- Arizona (Required)
Work Location: Remote
Remote working/work at home options are available for this role.
Not Specified
W
Remote Business Development Executive
🏢 Wholesale Payments
Salary not disclosed
Are you a results-driven sales professional ready to take full control of your income, schedule, and success?At Wholesale Payments, we're empowering ambitious Outside B2B Sales Executives to own their territory, dominate their market, and build lasting wealth in the rapidly growing fintech and merchant services industry.
What You'll Do
- Engage and consult with small and mid-sized business owners, offering best-in-class payment processing, POS, and business technology solutions
- Execute a proven B2B sales process — prospect, present, and close new accounts face-to-face
- Manage your own pipeline with full autonomy, supported by elite tools and a winning culture
- Build a residual income stream that grows month after month — every account you sign keeps paying you
- Become a trusted advisor to your clients — delivering value, savings, and partnership
What You'll Get
- Uncapped Commission Structure — earn what you're worth
- Lifetime Residuals — ongoing passive income on every account
- $15,000+ Fast-Start Bonus potential in your first 90 days
- Daily Qualified Leads so you can focus on closing, not chasing
- Exclusive Fintech Tools & CRM — built to help you win faster
- 45X Portfolio Buyout Option — turn your book into real equity
- Comprehensive Training, Mentorship & Closer Support
- 3-6 preset appointments each day!
What We're Looking For
- Proven B2B or outside sales track record (merchant services or fintech experience preferred)
- A fearless hunter mentality — you love prospecting and closing deals
- A "CLOSER" - Hybrid role with appointments that need to be closed!
- Entrepreneurial spirit with discipline and self-motivation
- Confident communicator who builds instant trust with business owners
- A go-getter who thrives in a performance-based environment
Why Wholesale Payments?
This isn't your typical sales gig — it's a career path toward true financial freedom. You'll be backed by one of the most respected names in the industry, equipped with world-class tools, and surrounded by a winning culture that rewards performance.
Job Type: Full-time
Pay: $85,000.00 - $185,000.00 per year
Benefits:
- Dental insurance
- Health insurance
- Paid time off
- Vision insurance
Experience:
- Outside sales: 2 years (Preferred)
- Direct sales: 1 year (Preferred)
- Sales: 4 years (Required)
- B2B sales: 2 years (Required)
Ability to Commute:
- Arizona (Required)
Work Location: Remote
Remote working/work at home options are available for this role.
Not Specified
Principal Electrical Controls Engineer - Data Center Infrastructure (REMOTE) (AUSTIN)
Salary not disclosed
Job Title: Principal Electrical Controls Engineer
Job Family: Electrical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly experienced and innovative Principal Controls Engineer to lead the development, optimization and implementation of advanced control systems across critical infrastructure products and automation platforms. This role is critical to ensuring the performance, reliability, and scalability of critical systems, with a strong emphasis on data center infrastructure, power/energy management, and industrial automation.
This role will involve designing and developing wiring harness systems, including schematic creation, harness architecture, panel layout, developing specifications, selecting key components, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.
What will you do?
- Define and own the control system architecture across multiple platforms, including PLCs, BMS, EPMS, and ATS systems, ensuring scalability, reliability, and maintainability.
- Develop detailed control system specifications, functional design documents, and interface definitions for all subsystems.
- Proficiency in PLC/SCADA programming, HMI development, and system integration with IT networks and facility equipment.
- Ability to read and create BOMs. visual aids, electrical schematics, control diagrams, and sequence of operations.
- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.
- Experience with critical infrastructure systems: UPS, generators, switchgear, chillers, CRAC/CRAH units, fire suppression systems.
- Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for new projects and revisions.
- Drive the development of system-level simulations and digital twins to validate control strategies before deployment
- Architect integration strategies for control systems with enterprise platforms such as SCADA, CMMS, and cloud-based monitoring tools
- Establish design patterns and best practices for modular and reusable control logic across projects
- Lead root cause analysis and resolution of complex control system issues during commissioning and operations
- Evaluate emerging technologies and automation trends to continuously improve system performance and efficiency
- Develop and maintain documentation for system architecture, control logic, and operational procedures
- Collaborate with electrical, mechanical, software, and facilities engineering teams to ensure seamless integration of control systems with physical infrastructure
- Work closely with cross functional teams to align control system designs with business requirements, timelines, and operational constraints
- Facilitate design reviews, technical workshops, and cross-functional planning sessions to ensure alignment and transparency across engineering disciplines
- Support commissioning and field teams during deployment, troubleshooting, and optimization of control systems
How will you get here?
Education:
- Bachelor’s Degree in Electrical Engineering or a relevant engineering discipline.
Experience:
- 8+ years pf experience in control system design and implementation
- Deep expertise in the following:
- PLC programming (Allen-Bradley, Siemens, Schneider Electric)
- Building Management Systems (BMS) integration and optimization
- Electrical Power Monitoring Systems (EPMS/EDPM) for real-time energy analytics
- Automatic Transfer Switches (ATS) control and failover logic
- Strong proficiency in control theory, system modeling, and simulation tools (MATLAB/Simulink)
- Experience with industrial protocols (Modbus, BACnet, OPC UA, Ethernet/IP)
- Familiarity with NFPA, IEC, and ISO standards related to control systems and safety.
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight as part of a global team
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices while mentoring less experienced engineers
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Excellent problem-solving skills and attention to detail
- Experience in EPlan, WindChill, SolidWorks, and DevOps are a plus
- Experience with hyperscale or colocation data center environments
- Familiarity with low and medium-voltage systems
Preferred Qualifications:
- Master’s Degree in Electrical Engineering or a relevant engineering discipline
- Active Professional Engineer (PE) license
- Experience in mission-critical environments such as data centers, manufacturing, or energy systems.
- Experience with digital twin modeling and predictive maintenance strategies.
Remote working/work at home options are available for this role.
Job Family: Electrical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly experienced and innovative Principal Controls Engineer to lead the development, optimization and implementation of advanced control systems across critical infrastructure products and automation platforms. This role is critical to ensuring the performance, reliability, and scalability of critical systems, with a strong emphasis on data center infrastructure, power/energy management, and industrial automation.
This role will involve designing and developing wiring harness systems, including schematic creation, harness architecture, panel layout, developing specifications, selecting key components, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.
What will you do?
- Define and own the control system architecture across multiple platforms, including PLCs, BMS, EPMS, and ATS systems, ensuring scalability, reliability, and maintainability.
- Develop detailed control system specifications, functional design documents, and interface definitions for all subsystems.
- Proficiency in PLC/SCADA programming, HMI development, and system integration with IT networks and facility equipment.
- Ability to read and create BOMs. visual aids, electrical schematics, control diagrams, and sequence of operations.
- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.
- Experience with critical infrastructure systems: UPS, generators, switchgear, chillers, CRAC/CRAH units, fire suppression systems.
- Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for new projects and revisions.
- Drive the development of system-level simulations and digital twins to validate control strategies before deployment
- Architect integration strategies for control systems with enterprise platforms such as SCADA, CMMS, and cloud-based monitoring tools
- Establish design patterns and best practices for modular and reusable control logic across projects
- Lead root cause analysis and resolution of complex control system issues during commissioning and operations
- Evaluate emerging technologies and automation trends to continuously improve system performance and efficiency
- Develop and maintain documentation for system architecture, control logic, and operational procedures
- Collaborate with electrical, mechanical, software, and facilities engineering teams to ensure seamless integration of control systems with physical infrastructure
- Work closely with cross functional teams to align control system designs with business requirements, timelines, and operational constraints
- Facilitate design reviews, technical workshops, and cross-functional planning sessions to ensure alignment and transparency across engineering disciplines
- Support commissioning and field teams during deployment, troubleshooting, and optimization of control systems
How will you get here?
Education:
- Bachelor’s Degree in Electrical Engineering or a relevant engineering discipline.
Experience:
- 8+ years pf experience in control system design and implementation
- Deep expertise in the following:
- PLC programming (Allen-Bradley, Siemens, Schneider Electric)
- Building Management Systems (BMS) integration and optimization
- Electrical Power Monitoring Systems (EPMS/EDPM) for real-time energy analytics
- Automatic Transfer Switches (ATS) control and failover logic
- Strong proficiency in control theory, system modeling, and simulation tools (MATLAB/Simulink)
- Experience with industrial protocols (Modbus, BACnet, OPC UA, Ethernet/IP)
- Familiarity with NFPA, IEC, and ISO standards related to control systems and safety.
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight as part of a global team
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices while mentoring less experienced engineers
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Excellent problem-solving skills and attention to detail
- Experience in EPlan, WindChill, SolidWorks, and DevOps are a plus
- Experience with hyperscale or colocation data center environments
- Familiarity with low and medium-voltage systems
Preferred Qualifications:
- Master’s Degree in Electrical Engineering or a relevant engineering discipline
- Active Professional Engineer (PE) license
- Experience in mission-critical environments such as data centers, manufacturing, or energy systems.
- Experience with digital twin modeling and predictive maintenance strategies.
Remote working/work at home options are available for this role.
temporary
Senior CAD Electrical Designer – Digital Infrastructure (REMOTE) (AUSTIN)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Lead Electrical CAD Designer
Job Family: General Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Lead Electrical CAD Designer will be responsible for creating detailed model designs, modifying existing designs, and working collaboratively with engineers and other team members to meet product specifications. The ideal candidate has in-depth knowledge of various electrical design tools, is detail-oriented, and can effectively communicate design ideas. A strong understanding of Electrical design principles, manufacturing processes, power distribution, automation control (PLC), and electronic device parts are critical. This role will involve selecting key components, developing detailed drawings for control panels, power distribution systems, electrical wiring, and transitioning design to manufacturing.
What will you do?
- Creating 2D and 3D models of electrical systems, particularly for complex projects or when visualization is needed
- Participating in design reviews to ensure accuracy and compliance with requirements
- Advanced proficiency in various CAD software, such as AutoCAD Electrical, Revit, Windchill, Autodesk Inventor-EMX, Autodesk Fusion, to design, draft, and model complex electrical for power system and automation control
- Strong understanding of electrical symbols, power systems and automation control with the concepts to accurately create designs that meet technical specifications and standards
- Work closely with engineers and other designers to meet product specifications and performance requirements
- Modify and revise designs to correct operating deficiencies or to reduce production problems
- Prepare and revise engineering drawings, schematics, BOMs, and layouts as required.
- Check and validate designs to ensure they meet required quality and safety standards
- Excellent attention to detail for ensuring the accuracy of measurements, dimensions, and design specifications
- Strong analytical skills for interpreting complex technical drawings, single line diagram, wiring diagram, schematic, power plan, automation control, ladder diagram, and electrical device specifications
- Designing and creating schematic PLC input/output connections.
- Knowledge of manufacturing processes and materials for creating feasible and cost-effective designs.
- Evaluate/optimize manufacturing assembly processes by designing, modifying, and testing manufacturing methods and equipment, conferring with equipment vendors, and soliciting observations from production team
- Adopt at creating detailed electrical design of components, sub-assemblies, and system integration
- Capable of creating a Bill of Materials (BOM) for release to manufacturing
- Manage relationships with power systems, electronics, control component vendors, and contract manufacturers
- Keep updated with the latest technologies and methods to ensure competitive and cost-effective designs
- Discuss with management and production staff to assess engineering feasibility and cost-effectiveness
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s degree in Electrical Engineering, Industrial Design or relevant field is required
Experience:
- 6-8 years of experience in electrical design within the power distribution or data center industry.
- Proven experience as a CAD designer, preferably in an electrical engineering environment.
- Proficiency in CAD software (AutoCAD Electrical, Revit).
- Strong understanding of electrical systems, integration strategy, and system coordination
- Excellent problem-solving skills and attention to detail
- Effective communication skills to liaise with engineers, manufacturers, and clients, explaining designs and modifications clearly and efficiently
Knowledge, Skills, Abilities:
- Strong knowledge of electrical design, manufacturing processes, and material properties.
- Power Systems, PLC, VFD, motor control, electronic automation control device, sensors, AC/DC, single phase and three phase power systems.
- Electrical Standards, Codes, and regulations: IEEE, UL, ANSI/NEMA, NFPA 70E, NEC, IEC, CSA.
- Excellent interpersonal and communication skills.
- Creative, self-motivated, accountable, and team-oriented.
- Able to work independently with minimal oversight.
- Effective at presenting information and responding to management, clients, and public queries.
- Capable of influencing others and sharing best practices.
- Comfortable working as part of a global team.
- Capable of assessing projects, articulating risks, and developing project milestones.
- Familiar with stage-gate processes in project lifecycle management (PLCM).
Remote working/work at home options are available for this role.
Job Family: General Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Lead Electrical CAD Designer will be responsible for creating detailed model designs, modifying existing designs, and working collaboratively with engineers and other team members to meet product specifications. The ideal candidate has in-depth knowledge of various electrical design tools, is detail-oriented, and can effectively communicate design ideas. A strong understanding of Electrical design principles, manufacturing processes, power distribution, automation control (PLC), and electronic device parts are critical. This role will involve selecting key components, developing detailed drawings for control panels, power distribution systems, electrical wiring, and transitioning design to manufacturing.
What will you do?
- Creating 2D and 3D models of electrical systems, particularly for complex projects or when visualization is needed
- Participating in design reviews to ensure accuracy and compliance with requirements
- Advanced proficiency in various CAD software, such as AutoCAD Electrical, Revit, Windchill, Autodesk Inventor-EMX, Autodesk Fusion, to design, draft, and model complex electrical for power system and automation control
- Strong understanding of electrical symbols, power systems and automation control with the concepts to accurately create designs that meet technical specifications and standards
- Work closely with engineers and other designers to meet product specifications and performance requirements
- Modify and revise designs to correct operating deficiencies or to reduce production problems
- Prepare and revise engineering drawings, schematics, BOMs, and layouts as required.
- Check and validate designs to ensure they meet required quality and safety standards
- Excellent attention to detail for ensuring the accuracy of measurements, dimensions, and design specifications
- Strong analytical skills for interpreting complex technical drawings, single line diagram, wiring diagram, schematic, power plan, automation control, ladder diagram, and electrical device specifications
- Designing and creating schematic PLC input/output connections.
- Knowledge of manufacturing processes and materials for creating feasible and cost-effective designs.
- Evaluate/optimize manufacturing assembly processes by designing, modifying, and testing manufacturing methods and equipment, conferring with equipment vendors, and soliciting observations from production team
- Adopt at creating detailed electrical design of components, sub-assemblies, and system integration
- Capable of creating a Bill of Materials (BOM) for release to manufacturing
- Manage relationships with power systems, electronics, control component vendors, and contract manufacturers
- Keep updated with the latest technologies and methods to ensure competitive and cost-effective designs
- Discuss with management and production staff to assess engineering feasibility and cost-effectiveness
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s degree in Electrical Engineering, Industrial Design or relevant field is required
Experience:
- 6-8 years of experience in electrical design within the power distribution or data center industry.
- Proven experience as a CAD designer, preferably in an electrical engineering environment.
- Proficiency in CAD software (AutoCAD Electrical, Revit).
- Strong understanding of electrical systems, integration strategy, and system coordination
- Excellent problem-solving skills and attention to detail
- Effective communication skills to liaise with engineers, manufacturers, and clients, explaining designs and modifications clearly and efficiently
Knowledge, Skills, Abilities:
- Strong knowledge of electrical design, manufacturing processes, and material properties.
- Power Systems, PLC, VFD, motor control, electronic automation control device, sensors, AC/DC, single phase and three phase power systems.
- Electrical Standards, Codes, and regulations: IEEE, UL, ANSI/NEMA, NFPA 70E, NEC, IEC, CSA.
- Excellent interpersonal and communication skills.
- Creative, self-motivated, accountable, and team-oriented.
- Able to work independently with minimal oversight.
- Effective at presenting information and responding to management, clients, and public queries.
- Capable of influencing others and sharing best practices.
- Comfortable working as part of a global team.
- Capable of assessing projects, articulating risks, and developing project milestones.
- Familiar with stage-gate processes in project lifecycle management (PLCM).
Remote working/work at home options are available for this role.
temporary
Principal Electrical Controls Engineer - Data Center Infrastructure - Remote flexibility with travel opportunities (AUSTIN)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Electrical Design Engineer
Job Family: Electrical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly experienced and innovative Principal Controls Engineer to lead the development, optimization and implementation of advanced control systems across critical infrastructure products and automation platforms. This role is critical to ensuring the performance, reliability, and scalability of critical systems, with a strong emphasis on data center infrastructure, power/energy management, and industrial automation.
This role will involve designing and developing wiring harness systems, including schematic creation, harness architecture, panel layout, developing specifications, selecting key components, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.
What will you do?
- Define and own the control system architecture across multiple platforms, including PLCs, BMS, EPMS, and ATS systems, ensuring scalability, reliability, and maintainability.
- Develop detailed control system specifications, functional design documents, and interface definitions for all subsystems.
- Proficiency in PLC/SCADA programming, HMI development, and system integration with IT networks and facility equipment.
- Ability to read and create BOMs. visual aids, electrical schematics, control diagrams, and sequence of operations.
- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.
- Experience with critical infrastructure systems: UPS, generators, switchgear, chillers, CRAC/CRAH units, fire suppression systems.
- Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for new projects and revisions.
- Drive the development of system-level simulations and digital twins to validate control strategies before deployment
- Architect integration strategies for control systems with enterprise platforms such as SCADA, CMMS, and cloud-based monitoring tools
- Establish design patterns and best practices for modular and reusable control logic across projects
- Lead root cause analysis and resolution of complex control system issues during commissioning and operations
- Evaluate emerging technologies and automation trends to continuously improve system performance and efficiency
- Develop and maintain documentation for system architecture, control logic, and operational procedures
- Collaborate with electrical, mechanical, software, and facilities engineering teams to ensure seamless integration of control systems with physical infrastructure
- Work closely with cross functional teams to align control system designs with business requirements, timelines, and operational constraints
- Facilitate design reviews, technical workshops, and cross-functional planning sessions to ensure alignment and transparency across engineering disciplines
- Support commissioning and field teams during deployment, troubleshooting, and optimization of control systems
How will you get here?
Education:
- Bachelor’s Degree in Electrical Engineering or a relevant engineering discipline.
Experience:
- 8+ years pf experience in control system design and implementation
- Deep expertise in the following:
- PLC programming (Allen-Bradley, Siemens, Schneider Electric)
- Building Management Systems (BMS) integration and optimization
- Electrical Power Monitoring Systems (EPMS/EDPM) for real-time energy analytics
- Automatic Transfer Switches (ATS) control and failover logic
- Strong proficiency in control theory, system modeling, and simulation tools (MATLAB/Simulink)
- Experience with industrial protocols (Modbus, BACnet, OPC UA, Ethernet/IP)
- Familiarity with NFPA, IEC, and ISO standards related to control systems and safety.
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight as part of a global team
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices while mentoring less experienced engineers
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Excellent problem-solving skills and attention to detail
- Experience in EPlan, WindChill, SolidWorks, and DevOps are a plus
- Experience with hyperscale or colocation data center environments
- Familiarity with low and medium-voltage systems
Preferred Qualifications:
- Master’s Degree in Electrical Engineering or a relevant engineering discipline
- Active Professional Engineer (PE) license
- Experience in mission-critical environments such as data centers, manufacturing, or energy systems.
- Experience with digital twin modeling and predictive maintenance strategies.
Remote working/work at home options are available for this role.
Job Family: Electrical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly experienced and innovative Principal Controls Engineer to lead the development, optimization and implementation of advanced control systems across critical infrastructure products and automation platforms. This role is critical to ensuring the performance, reliability, and scalability of critical systems, with a strong emphasis on data center infrastructure, power/energy management, and industrial automation.
This role will involve designing and developing wiring harness systems, including schematic creation, harness architecture, panel layout, developing specifications, selecting key components, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.
What will you do?
- Define and own the control system architecture across multiple platforms, including PLCs, BMS, EPMS, and ATS systems, ensuring scalability, reliability, and maintainability.
- Develop detailed control system specifications, functional design documents, and interface definitions for all subsystems.
- Proficiency in PLC/SCADA programming, HMI development, and system integration with IT networks and facility equipment.
- Ability to read and create BOMs. visual aids, electrical schematics, control diagrams, and sequence of operations.
- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.
- Experience with critical infrastructure systems: UPS, generators, switchgear, chillers, CRAC/CRAH units, fire suppression systems.
- Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for new projects and revisions.
- Drive the development of system-level simulations and digital twins to validate control strategies before deployment
- Architect integration strategies for control systems with enterprise platforms such as SCADA, CMMS, and cloud-based monitoring tools
- Establish design patterns and best practices for modular and reusable control logic across projects
- Lead root cause analysis and resolution of complex control system issues during commissioning and operations
- Evaluate emerging technologies and automation trends to continuously improve system performance and efficiency
- Develop and maintain documentation for system architecture, control logic, and operational procedures
- Collaborate with electrical, mechanical, software, and facilities engineering teams to ensure seamless integration of control systems with physical infrastructure
- Work closely with cross functional teams to align control system designs with business requirements, timelines, and operational constraints
- Facilitate design reviews, technical workshops, and cross-functional planning sessions to ensure alignment and transparency across engineering disciplines
- Support commissioning and field teams during deployment, troubleshooting, and optimization of control systems
How will you get here?
Education:
- Bachelor’s Degree in Electrical Engineering or a relevant engineering discipline.
Experience:
- 8+ years pf experience in control system design and implementation
- Deep expertise in the following:
- PLC programming (Allen-Bradley, Siemens, Schneider Electric)
- Building Management Systems (BMS) integration and optimization
- Electrical Power Monitoring Systems (EPMS/EDPM) for real-time energy analytics
- Automatic Transfer Switches (ATS) control and failover logic
- Strong proficiency in control theory, system modeling, and simulation tools (MATLAB/Simulink)
- Experience with industrial protocols (Modbus, BACnet, OPC UA, Ethernet/IP)
- Familiarity with NFPA, IEC, and ISO standards related to control systems and safety.
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight as part of a global team
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices while mentoring less experienced engineers
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Excellent problem-solving skills and attention to detail
- Experience in EPlan, WindChill, SolidWorks, and DevOps are a plus
- Experience with hyperscale or colocation data center environments
- Familiarity with low and medium-voltage systems
Preferred Qualifications:
- Master’s Degree in Electrical Engineering or a relevant engineering discipline
- Active Professional Engineer (PE) license
- Experience in mission-critical environments such as data centers, manufacturing, or energy systems.
- Experience with digital twin modeling and predictive maintenance strategies.
Remote working/work at home options are available for this role.
temporary
Principal Electrical Controls Engineer - Data Center Infrastructure (REMOTE) (WASHINGTON)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Electrical Controls Engineer
Job Family: Electrical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly experienced and innovative Principal Controls Engineer to lead the development, optimization and implementation of advanced control systems across critical infrastructure products and automation platforms. This role is critical to ensuring the performance, reliability, and scalability of critical systems, with a strong emphasis on data center infrastructure, power/energy management, and industrial automation.
This role will involve designing and developing wiring harness systems, including schematic creation, harness architecture, panel layout, developing specifications, selecting key components, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.
What will you do?
- Define and own the control system architecture across multiple platforms, including PLCs, BMS, EPMS, and ATS systems, ensuring scalability, reliability, and maintainability.
- Develop detailed control system specifications, functional design documents, and interface definitions for all subsystems.
- Proficiency in PLC/SCADA programming, HMI development, and system integration with IT networks and facility equipment.
- Ability to read and create BOMs. visual aids, electrical schematics, control diagrams, and sequence of operations.
- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.
- Experience with critical infrastructure systems: UPS, generators, switchgear, chillers, CRAC/CRAH units, fire suppression systems.
- Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for new projects and revisions.
- Drive the development of system-level simulations and digital twins to validate control strategies before deployment
- Architect integration strategies for control systems with enterprise platforms such as SCADA, CMMS, and cloud-based monitoring tools
- Establish design patterns and best practices for modular and reusable control logic across projects
- Lead root cause analysis and resolution of complex control system issues during commissioning and operations
- Evaluate emerging technologies and automation trends to continuously improve system performance and efficiency
- Develop and maintain documentation for system architecture, control logic, and operational procedures
- Collaborate with electrical, mechanical, software, and facilities engineering teams to ensure seamless integration of control systems with physical infrastructure
- Work closely with cross functional teams to align control system designs with business requirements, timelines, and operational constraints
- Facilitate design reviews, technical workshops, and cross-functional planning sessions to ensure alignment and transparency across engineering disciplines
- Support commissioning and field teams during deployment, troubleshooting, and optimization of control systems
How will you get here?
Education:
- Bachelor’s Degree in Electrical Engineering or a relevant engineering discipline.
Experience:
- 8+ years pf experience in control system design and implementation
- Deep expertise in the following:
- PLC programming (Allen-Bradley, Siemens, Schneider Electric)
- Building Management Systems (BMS) integration and optimization
- Electrical Power Monitoring Systems (EPMS/EDPM) for real-time energy analytics
- Automatic Transfer Switches (ATS) control and failover logic
- Strong proficiency in control theory, system modeling, and simulation tools (MATLAB/Simulink)
- Experience with industrial protocols (Modbus, BACnet, OPC UA, Ethernet/IP)
- Familiarity with NFPA, IEC, and ISO standards related to control systems and safety.
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight as part of a global team
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices while mentoring less experienced engineers
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Excellent problem-solving skills and attention to detail
- Experience in EPlan, WindChill, SolidWorks, and DevOps are a plus
- Experience with hyperscale or colocation data center environments
- Familiarity with low and medium-voltage systems
Preferred Qualifications:
- Master’s Degree in Electrical Engineering or a relevant engineering discipline
- Active Professional Engineer (PE) license
- Experience in mission-critical environments such as data centers, manufacturing, or energy systems.
- Experience with digital twin modeling and predictive maintenance strategies.
Remote working/work at home options are available for this role.
Job Family: Electrical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly experienced and innovative Principal Controls Engineer to lead the development, optimization and implementation of advanced control systems across critical infrastructure products and automation platforms. This role is critical to ensuring the performance, reliability, and scalability of critical systems, with a strong emphasis on data center infrastructure, power/energy management, and industrial automation.
This role will involve designing and developing wiring harness systems, including schematic creation, harness architecture, panel layout, developing specifications, selecting key components, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.
What will you do?
- Define and own the control system architecture across multiple platforms, including PLCs, BMS, EPMS, and ATS systems, ensuring scalability, reliability, and maintainability.
- Develop detailed control system specifications, functional design documents, and interface definitions for all subsystems.
- Proficiency in PLC/SCADA programming, HMI development, and system integration with IT networks and facility equipment.
- Ability to read and create BOMs. visual aids, electrical schematics, control diagrams, and sequence of operations.
- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.
- Experience with critical infrastructure systems: UPS, generators, switchgear, chillers, CRAC/CRAH units, fire suppression systems.
- Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for new projects and revisions.
- Drive the development of system-level simulations and digital twins to validate control strategies before deployment
- Architect integration strategies for control systems with enterprise platforms such as SCADA, CMMS, and cloud-based monitoring tools
- Establish design patterns and best practices for modular and reusable control logic across projects
- Lead root cause analysis and resolution of complex control system issues during commissioning and operations
- Evaluate emerging technologies and automation trends to continuously improve system performance and efficiency
- Develop and maintain documentation for system architecture, control logic, and operational procedures
- Collaborate with electrical, mechanical, software, and facilities engineering teams to ensure seamless integration of control systems with physical infrastructure
- Work closely with cross functional teams to align control system designs with business requirements, timelines, and operational constraints
- Facilitate design reviews, technical workshops, and cross-functional planning sessions to ensure alignment and transparency across engineering disciplines
- Support commissioning and field teams during deployment, troubleshooting, and optimization of control systems
How will you get here?
Education:
- Bachelor’s Degree in Electrical Engineering or a relevant engineering discipline.
Experience:
- 8+ years pf experience in control system design and implementation
- Deep expertise in the following:
- PLC programming (Allen-Bradley, Siemens, Schneider Electric)
- Building Management Systems (BMS) integration and optimization
- Electrical Power Monitoring Systems (EPMS/EDPM) for real-time energy analytics
- Automatic Transfer Switches (ATS) control and failover logic
- Strong proficiency in control theory, system modeling, and simulation tools (MATLAB/Simulink)
- Experience with industrial protocols (Modbus, BACnet, OPC UA, Ethernet/IP)
- Familiarity with NFPA, IEC, and ISO standards related to control systems and safety.
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight as part of a global team
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices while mentoring less experienced engineers
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Excellent problem-solving skills and attention to detail
- Experience in EPlan, WindChill, SolidWorks, and DevOps are a plus
- Experience with hyperscale or colocation data center environments
- Familiarity with low and medium-voltage systems
Preferred Qualifications:
- Master’s Degree in Electrical Engineering or a relevant engineering discipline
- Active Professional Engineer (PE) license
- Experience in mission-critical environments such as data centers, manufacturing, or energy systems.
- Experience with digital twin modeling and predictive maintenance strategies.
Remote working/work at home options are available for this role.
temporary
Senior Electrical CAD Engineer – Remote Data Center Design (WASHINGTON)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Lead Electrical CAD Designer
Job Family: General Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Lead Electrical CAD Designer will be responsible for creating detailed model designs, modifying existing designs, and working collaboratively with engineers and other team members to meet product specifications. The ideal candidate has in-depth knowledge of various electrical design tools, is detail-oriented, and can effectively communicate design ideas. A strong understanding of Electrical design principles, manufacturing processes, power distribution, automation control (PLC), and electronic device parts are critical. This role will involve selecting key components, developing detailed drawings for control panels, power distribution systems, electrical wiring, and transitioning design to manufacturing.
What will you do?
- Creating 2D and 3D models of electrical systems, particularly for complex projects or when visualization is needed
- Participating in design reviews to ensure accuracy and compliance with requirements
- Advanced proficiency in various CAD software, such as AutoCAD Electrical, Revit, Windchill, Autodesk Inventor-EMX, Autodesk Fusion, to design, draft, and model complex electrical for power system and automation control
- Strong understanding of electrical symbols, power systems and automation control with the concepts to accurately create designs that meet technical specifications and standards
- Work closely with engineers and other designers to meet product specifications and performance requirements
- Modify and revise designs to correct operating deficiencies or to reduce production problems
- Prepare and revise engineering drawings, schematics, BOMs, and layouts as required.
- Check and validate designs to ensure they meet required quality and safety standards
- Excellent attention to detail for ensuring the accuracy of measurements, dimensions, and design specifications
- Strong analytical skills for interpreting complex technical drawings, single line diagram, wiring diagram, schematic, power plan, automation control, ladder diagram, and electrical device specifications
- Designing and creating schematic PLC input/output connections.
- Knowledge of manufacturing processes and materials for creating feasible and cost-effective designs.
- Evaluate/optimize manufacturing assembly processes by designing, modifying, and testing manufacturing methods and equipment, conferring with equipment vendors, and soliciting observations from production team
- Adopt at creating detailed electrical design of components, sub-assemblies, and system integration
- Capable of creating a Bill of Materials (BOM) for release to manufacturing
- Manage relationships with power systems, electronics, control component vendors, and contract manufacturers
- Keep updated with the latest technologies and methods to ensure competitive and cost-effective designs
- Discuss with management and production staff to assess engineering feasibility and cost-effectiveness
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s degree in Electrical Engineering, Industrial Design or relevant field is required
Experience:
- 6-8 years of experience in electrical design within the power distribution or data center industry.
- Proven experience as a CAD designer, preferably in an electrical engineering environment.
- Proficiency in CAD software (AutoCAD Electrical, Revit).
- Strong understanding of electrical systems, integration strategy, and system coordination
- Excellent problem-solving skills and attention to detail
- Effective communication skills to liaise with engineers, manufacturers, and clients, explaining designs and modifications clearly and efficiently
Knowledge, Skills, Abilities:
- Strong knowledge of electrical design, manufacturing processes, and material properties.
- Power Systems, PLC, VFD, motor control, electronic automation control device, sensors, AC/DC, single phase and three phase power systems.
- Electrical Standards, Codes, and regulations: IEEE, UL, ANSI/NEMA, NFPA 70E, NEC, IEC, CSA.
- Excellent interpersonal and communication skills.
- Creative, self-motivated, accountable, and team-oriented.
- Able to work independently with minimal oversight.
- Effective at presenting information and responding to management, clients, and public queries.
- Capable of influencing others and sharing best practices.
- Comfortable working as part of a global team.
- Capable of assessing projects, articulating risks, and developing project milestones.
- Familiar with stage-gate processes in project lifecycle management (PLCM).
Remote working/work at home options are available for this role.
Job Family: General Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Lead Electrical CAD Designer will be responsible for creating detailed model designs, modifying existing designs, and working collaboratively with engineers and other team members to meet product specifications. The ideal candidate has in-depth knowledge of various electrical design tools, is detail-oriented, and can effectively communicate design ideas. A strong understanding of Electrical design principles, manufacturing processes, power distribution, automation control (PLC), and electronic device parts are critical. This role will involve selecting key components, developing detailed drawings for control panels, power distribution systems, electrical wiring, and transitioning design to manufacturing.
What will you do?
- Creating 2D and 3D models of electrical systems, particularly for complex projects or when visualization is needed
- Participating in design reviews to ensure accuracy and compliance with requirements
- Advanced proficiency in various CAD software, such as AutoCAD Electrical, Revit, Windchill, Autodesk Inventor-EMX, Autodesk Fusion, to design, draft, and model complex electrical for power system and automation control
- Strong understanding of electrical symbols, power systems and automation control with the concepts to accurately create designs that meet technical specifications and standards
- Work closely with engineers and other designers to meet product specifications and performance requirements
- Modify and revise designs to correct operating deficiencies or to reduce production problems
- Prepare and revise engineering drawings, schematics, BOMs, and layouts as required.
- Check and validate designs to ensure they meet required quality and safety standards
- Excellent attention to detail for ensuring the accuracy of measurements, dimensions, and design specifications
- Strong analytical skills for interpreting complex technical drawings, single line diagram, wiring diagram, schematic, power plan, automation control, ladder diagram, and electrical device specifications
- Designing and creating schematic PLC input/output connections.
- Knowledge of manufacturing processes and materials for creating feasible and cost-effective designs.
- Evaluate/optimize manufacturing assembly processes by designing, modifying, and testing manufacturing methods and equipment, conferring with equipment vendors, and soliciting observations from production team
- Adopt at creating detailed electrical design of components, sub-assemblies, and system integration
- Capable of creating a Bill of Materials (BOM) for release to manufacturing
- Manage relationships with power systems, electronics, control component vendors, and contract manufacturers
- Keep updated with the latest technologies and methods to ensure competitive and cost-effective designs
- Discuss with management and production staff to assess engineering feasibility and cost-effectiveness
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s degree in Electrical Engineering, Industrial Design or relevant field is required
Experience:
- 6-8 years of experience in electrical design within the power distribution or data center industry.
- Proven experience as a CAD designer, preferably in an electrical engineering environment.
- Proficiency in CAD software (AutoCAD Electrical, Revit).
- Strong understanding of electrical systems, integration strategy, and system coordination
- Excellent problem-solving skills and attention to detail
- Effective communication skills to liaise with engineers, manufacturers, and clients, explaining designs and modifications clearly and efficiently
Knowledge, Skills, Abilities:
- Strong knowledge of electrical design, manufacturing processes, and material properties.
- Power Systems, PLC, VFD, motor control, electronic automation control device, sensors, AC/DC, single phase and three phase power systems.
- Electrical Standards, Codes, and regulations: IEEE, UL, ANSI/NEMA, NFPA 70E, NEC, IEC, CSA.
- Excellent interpersonal and communication skills.
- Creative, self-motivated, accountable, and team-oriented.
- Able to work independently with minimal oversight.
- Effective at presenting information and responding to management, clients, and public queries.
- Capable of influencing others and sharing best practices.
- Comfortable working as part of a global team.
- Capable of assessing projects, articulating risks, and developing project milestones.
- Familiar with stage-gate processes in project lifecycle management (PLCM).
Remote working/work at home options are available for this role.
temporary
Principal Electrical Controls Engineer - Data Center Infrastructure - Remote work opportunity with international travel exposure (WASHINGTON)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Electrical Design Engineer
Job Family: Electrical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly experienced and innovative Principal Controls Engineer to lead the development, optimization and implementation of advanced control systems across critical infrastructure products and automation platforms. This role is critical to ensuring the performance, reliability, and scalability of critical systems, with a strong emphasis on data center infrastructure, power/energy management, and industrial automation.
This role will involve designing and developing wiring harness systems, including schematic creation, harness architecture, panel layout, developing specifications, selecting key components, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.
What will you do?
- Define and own the control system architecture across multiple platforms, including PLCs, BMS, EPMS, and ATS systems, ensuring scalability, reliability, and maintainability.
- Develop detailed control system specifications, functional design documents, and interface definitions for all subsystems.
- Proficiency in PLC/SCADA programming, HMI development, and system integration with IT networks and facility equipment.
- Ability to read and create BOMs. visual aids, electrical schematics, control diagrams, and sequence of operations.
- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.
- Experience with critical infrastructure systems: UPS, generators, switchgear, chillers, CRAC/CRAH units, fire suppression systems.
- Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for new projects and revisions.
- Drive the development of system-level simulations and digital twins to validate control strategies before deployment
- Architect integration strategies for control systems with enterprise platforms such as SCADA, CMMS, and cloud-based monitoring tools
- Establish design patterns and best practices for modular and reusable control logic across projects
- Lead root cause analysis and resolution of complex control system issues during commissioning and operations
- Evaluate emerging technologies and automation trends to continuously improve system performance and efficiency
- Develop and maintain documentation for system architecture, control logic, and operational procedures
- Collaborate with electrical, mechanical, software, and facilities engineering teams to ensure seamless integration of control systems with physical infrastructure
- Work closely with cross functional teams to align control system designs with business requirements, timelines, and operational constraints
- Facilitate design reviews, technical workshops, and cross-functional planning sessions to ensure alignment and transparency across engineering disciplines
- Support commissioning and field teams during deployment, troubleshooting, and optimization of control systems
How will you get here?
Education:
- Bachelor’s Degree in Electrical Engineering or a relevant engineering discipline.
Experience:
- 8+ years pf experience in control system design and implementation
- Deep expertise in the following:
- PLC programming (Allen-Bradley, Siemens, Schneider Electric)
- Building Management Systems (BMS) integration and optimization
- Electrical Power Monitoring Systems (EPMS/EDPM) for real-time energy analytics
- Automatic Transfer Switches (ATS) control and failover logic
- Strong proficiency in control theory, system modeling, and simulation tools (MATLAB/Simulink)
- Experience with industrial protocols (Modbus, BACnet, OPC UA, Ethernet/IP)
- Familiarity with NFPA, IEC, and ISO standards related to control systems and safety.
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight as part of a global team
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices while mentoring less experienced engineers
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Excellent problem-solving skills and attention to detail
- Experience in EPlan, WindChill, SolidWorks, and DevOps are a plus
- Experience with hyperscale or colocation data center environments
- Familiarity with low and medium-voltage systems
Preferred Qualifications:
- Master’s Degree in Electrical Engineering or a relevant engineering discipline
- Active Professional Engineer (PE) license
- Experience in mission-critical environments such as data centers, manufacturing, or energy systems.
- Experience with digital twin modeling and predictive maintenance strategies.
Remote working/work at home options are available for this role.
Job Family: Electrical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly experienced and innovative Principal Controls Engineer to lead the development, optimization and implementation of advanced control systems across critical infrastructure products and automation platforms. This role is critical to ensuring the performance, reliability, and scalability of critical systems, with a strong emphasis on data center infrastructure, power/energy management, and industrial automation.
This role will involve designing and developing wiring harness systems, including schematic creation, harness architecture, panel layout, developing specifications, selecting key components, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.
What will you do?
- Define and own the control system architecture across multiple platforms, including PLCs, BMS, EPMS, and ATS systems, ensuring scalability, reliability, and maintainability.
- Develop detailed control system specifications, functional design documents, and interface definitions for all subsystems.
- Proficiency in PLC/SCADA programming, HMI development, and system integration with IT networks and facility equipment.
- Ability to read and create BOMs. visual aids, electrical schematics, control diagrams, and sequence of operations.
- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.
- Experience with critical infrastructure systems: UPS, generators, switchgear, chillers, CRAC/CRAH units, fire suppression systems.
- Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for new projects and revisions.
- Drive the development of system-level simulations and digital twins to validate control strategies before deployment
- Architect integration strategies for control systems with enterprise platforms such as SCADA, CMMS, and cloud-based monitoring tools
- Establish design patterns and best practices for modular and reusable control logic across projects
- Lead root cause analysis and resolution of complex control system issues during commissioning and operations
- Evaluate emerging technologies and automation trends to continuously improve system performance and efficiency
- Develop and maintain documentation for system architecture, control logic, and operational procedures
- Collaborate with electrical, mechanical, software, and facilities engineering teams to ensure seamless integration of control systems with physical infrastructure
- Work closely with cross functional teams to align control system designs with business requirements, timelines, and operational constraints
- Facilitate design reviews, technical workshops, and cross-functional planning sessions to ensure alignment and transparency across engineering disciplines
- Support commissioning and field teams during deployment, troubleshooting, and optimization of control systems
How will you get here?
Education:
- Bachelor’s Degree in Electrical Engineering or a relevant engineering discipline.
Experience:
- 8+ years pf experience in control system design and implementation
- Deep expertise in the following:
- PLC programming (Allen-Bradley, Siemens, Schneider Electric)
- Building Management Systems (BMS) integration and optimization
- Electrical Power Monitoring Systems (EPMS/EDPM) for real-time energy analytics
- Automatic Transfer Switches (ATS) control and failover logic
- Strong proficiency in control theory, system modeling, and simulation tools (MATLAB/Simulink)
- Experience with industrial protocols (Modbus, BACnet, OPC UA, Ethernet/IP)
- Familiarity with NFPA, IEC, and ISO standards related to control systems and safety.
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight as part of a global team
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices while mentoring less experienced engineers
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Excellent problem-solving skills and attention to detail
- Experience in EPlan, WindChill, SolidWorks, and DevOps are a plus
- Experience with hyperscale or colocation data center environments
- Familiarity with low and medium-voltage systems
Preferred Qualifications:
- Master’s Degree in Electrical Engineering or a relevant engineering discipline
- Active Professional Engineer (PE) license
- Experience in mission-critical environments such as data centers, manufacturing, or energy systems.
- Experience with digital twin modeling and predictive maintenance strategies.
Remote working/work at home options are available for this role.
temporary
Principal Electrical Controls Engineer - Data Center Infrastructure (REMOTE) - Opportunity for Global Travel (AUSTIN)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Electrical Controls Engineer
Job Family: Electrical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly experienced and innovative Principal Controls Engineer to lead the development, optimization and implementation of advanced control systems across critical infrastructure products and automation platforms. This role is critical to ensuring the performance, reliability, and scalability of critical systems, with a strong emphasis on data center infrastructure, power/energy management, and industrial automation.
This role will involve designing and developing wiring harness systems, including schematic creation, harness architecture, panel layout, developing specifications, selecting key components, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.
What will you do?
- Define and own the control system architecture across multiple platforms, including PLCs, BMS, EPMS, and ATS systems, ensuring scalability, reliability, and maintainability.
- Develop detailed control system specifications, functional design documents, and interface definitions for all subsystems.
- Proficiency in PLC/SCADA programming, HMI development, and system integration with IT networks and facility equipment.
- Ability to read and create BOMs. visual aids, electrical schematics, control diagrams, and sequence of operations.
- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.
- Experience with critical infrastructure systems: UPS, generators, switchgear, chillers, CRAC/CRAH units, fire suppression systems.
- Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for new projects and revisions.
- Drive the development of system-level simulations and digital twins to validate control strategies before deployment
- Architect integration strategies for control systems with enterprise platforms such as SCADA, CMMS, and cloud-based monitoring tools
- Establish design patterns and best practices for modular and reusable control logic across projects
- Lead root cause analysis and resolution of complex control system issues during commissioning and operations
- Evaluate emerging technologies and automation trends to continuously improve system performance and efficiency
- Develop and maintain documentation for system architecture, control logic, and operational procedures
- Collaborate with electrical, mechanical, software, and facilities engineering teams to ensure seamless integration of control systems with physical infrastructure
- Work closely with cross functional teams to align control system designs with business requirements, timelines, and operational constraints
- Facilitate design reviews, technical workshops, and cross-functional planning sessions to ensure alignment and transparency across engineering disciplines
- Support commissioning and field teams during deployment, troubleshooting, and optimization of control systems
How will you get here?
Education:
- Bachelor’s Degree in Electrical Engineering or a relevant engineering discipline.
Experience:
- 8+ years pf experience in control system design and implementation
- Deep expertise in the following:
- PLC programming (Allen-Bradley, Siemens, Schneider Electric)
- Building Management Systems (BMS) integration and optimization
- Electrical Power Monitoring Systems (EPMS/EDPM) for real-time energy analytics
- Automatic Transfer Switches (ATS) control and failover logic
- Strong proficiency in control theory, system modeling, and simulation tools (MATLAB/Simulink)
- Experience with industrial protocols (Modbus, BACnet, OPC UA, Ethernet/IP)
- Familiarity with NFPA, IEC, and ISO standards related to control systems and safety.
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight as part of a global team
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices while mentoring less experienced engineers
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Excellent problem-solving skills and attention to detail
- Experience in EPlan, WindChill, SolidWorks, and DevOps are a plus
- Experience with hyperscale or colocation data center environments
- Familiarity with low and medium-voltage systems
Preferred Qualifications:
- Master’s Degree in Electrical Engineering or a relevant engineering discipline
- Active Professional Engineer (PE) license
- Experience in mission-critical environments such as data centers, manufacturing, or energy systems.
- Experience with digital twin modeling and predictive maintenance strategies.
Remote working/work at home options are available for this role.
Job Family: Electrical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly experienced and innovative Principal Controls Engineer to lead the development, optimization and implementation of advanced control systems across critical infrastructure products and automation platforms. This role is critical to ensuring the performance, reliability, and scalability of critical systems, with a strong emphasis on data center infrastructure, power/energy management, and industrial automation.
This role will involve designing and developing wiring harness systems, including schematic creation, harness architecture, panel layout, developing specifications, selecting key components, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.
What will you do?
- Define and own the control system architecture across multiple platforms, including PLCs, BMS, EPMS, and ATS systems, ensuring scalability, reliability, and maintainability.
- Develop detailed control system specifications, functional design documents, and interface definitions for all subsystems.
- Proficiency in PLC/SCADA programming, HMI development, and system integration with IT networks and facility equipment.
- Ability to read and create BOMs. visual aids, electrical schematics, control diagrams, and sequence of operations.
- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.
- Experience with critical infrastructure systems: UPS, generators, switchgear, chillers, CRAC/CRAH units, fire suppression systems.
- Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for new projects and revisions.
- Drive the development of system-level simulations and digital twins to validate control strategies before deployment
- Architect integration strategies for control systems with enterprise platforms such as SCADA, CMMS, and cloud-based monitoring tools
- Establish design patterns and best practices for modular and reusable control logic across projects
- Lead root cause analysis and resolution of complex control system issues during commissioning and operations
- Evaluate emerging technologies and automation trends to continuously improve system performance and efficiency
- Develop and maintain documentation for system architecture, control logic, and operational procedures
- Collaborate with electrical, mechanical, software, and facilities engineering teams to ensure seamless integration of control systems with physical infrastructure
- Work closely with cross functional teams to align control system designs with business requirements, timelines, and operational constraints
- Facilitate design reviews, technical workshops, and cross-functional planning sessions to ensure alignment and transparency across engineering disciplines
- Support commissioning and field teams during deployment, troubleshooting, and optimization of control systems
How will you get here?
Education:
- Bachelor’s Degree in Electrical Engineering or a relevant engineering discipline.
Experience:
- 8+ years pf experience in control system design and implementation
- Deep expertise in the following:
- PLC programming (Allen-Bradley, Siemens, Schneider Electric)
- Building Management Systems (BMS) integration and optimization
- Electrical Power Monitoring Systems (EPMS/EDPM) for real-time energy analytics
- Automatic Transfer Switches (ATS) control and failover logic
- Strong proficiency in control theory, system modeling, and simulation tools (MATLAB/Simulink)
- Experience with industrial protocols (Modbus, BACnet, OPC UA, Ethernet/IP)
- Familiarity with NFPA, IEC, and ISO standards related to control systems and safety.
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight as part of a global team
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices while mentoring less experienced engineers
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Excellent problem-solving skills and attention to detail
- Experience in EPlan, WindChill, SolidWorks, and DevOps are a plus
- Experience with hyperscale or colocation data center environments
- Familiarity with low and medium-voltage systems
Preferred Qualifications:
- Master’s Degree in Electrical Engineering or a relevant engineering discipline
- Active Professional Engineer (PE) license
- Experience in mission-critical environments such as data centers, manufacturing, or energy systems.
- Experience with digital twin modeling and predictive maintenance strategies.
Remote working/work at home options are available for this role.
temporary
Principal Electrical Controls Engineer - Data Center Infrastructure (REMOTE) - Flexible Work Environment with Travel Opportunities (WASHINGTON)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Electrical Controls Engineer
Job Family: Electrical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly experienced and innovative Principal Controls Engineer to lead the development, optimization and implementation of advanced control systems across critical infrastructure products and automation platforms. This role is critical to ensuring the performance, reliability, and scalability of critical systems, with a strong emphasis on data center infrastructure, power/energy management, and industrial automation.
This role will involve designing and developing wiring harness systems, including schematic creation, harness architecture, panel layout, developing specifications, selecting key components, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.
What will you do?
- Define and own the control system architecture across multiple platforms, including PLCs, BMS, EPMS, and ATS systems, ensuring scalability, reliability, and maintainability.
- Develop detailed control system specifications, functional design documents, and interface definitions for all subsystems.
- Proficiency in PLC/SCADA programming, HMI development, and system integration with IT networks and facility equipment.
- Ability to read and create BOMs. visual aids, electrical schematics, control diagrams, and sequence of operations.
- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.
- Experience with critical infrastructure systems: UPS, generators, switchgear, chillers, CRAC/CRAH units, fire suppression systems.
- Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for new projects and revisions.
- Drive the development of system-level simulations and digital twins to validate control strategies before deployment
- Architect integration strategies for control systems with enterprise platforms such as SCADA, CMMS, and cloud-based monitoring tools
- Establish design patterns and best practices for modular and reusable control logic across projects
- Lead root cause analysis and resolution of complex control system issues during commissioning and operations
- Evaluate emerging technologies and automation trends to continuously improve system performance and efficiency
- Develop and maintain documentation for system architecture, control logic, and operational procedures
- Collaborate with electrical, mechanical, software, and facilities engineering teams to ensure seamless integration of control systems with physical infrastructure
- Work closely with cross functional teams to align control system designs with business requirements, timelines, and operational constraints
- Facilitate design reviews, technical workshops, and cross-functional planning sessions to ensure alignment and transparency across engineering disciplines
- Support commissioning and field teams during deployment, troubleshooting, and optimization of control systems
How will you get here?
Education:
- Bachelor’s Degree in Electrical Engineering or a relevant engineering discipline.
Experience:
- 8+ years pf experience in control system design and implementation
- Deep expertise in the following:
- PLC programming (Allen-Bradley, Siemens, Schneider Electric)
- Building Management Systems (BMS) integration and optimization
- Electrical Power Monitoring Systems (EPMS/EDPM) for real-time energy analytics
- Automatic Transfer Switches (ATS) control and failover logic
- Strong proficiency in control theory, system modeling, and simulation tools (MATLAB/Simulink)
- Experience with industrial protocols (Modbus, BACnet, OPC UA, Ethernet/IP)
- Familiarity with NFPA, IEC, and ISO standards related to control systems and safety.
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight as part of a global team
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices while mentoring less experienced engineers
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Excellent problem-solving skills and attention to detail
- Experience in EPlan, WindChill, SolidWorks, and DevOps are a plus
- Experience with hyperscale or colocation data center environments
- Familiarity with low and medium-voltage systems
Preferred Qualifications:
- Master’s Degree in Electrical Engineering or a relevant engineering discipline
- Active Professional Engineer (PE) license
- Experience in mission-critical environments such as data centers, manufacturing, or energy systems.
- Experience with digital twin modeling and predictive maintenance strategies.
Remote working/work at home options are available for this role.
Job Family: Electrical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly experienced and innovative Principal Controls Engineer to lead the development, optimization and implementation of advanced control systems across critical infrastructure products and automation platforms. This role is critical to ensuring the performance, reliability, and scalability of critical systems, with a strong emphasis on data center infrastructure, power/energy management, and industrial automation.
This role will involve designing and developing wiring harness systems, including schematic creation, harness architecture, panel layout, developing specifications, selecting key components, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.
What will you do?
- Define and own the control system architecture across multiple platforms, including PLCs, BMS, EPMS, and ATS systems, ensuring scalability, reliability, and maintainability.
- Develop detailed control system specifications, functional design documents, and interface definitions for all subsystems.
- Proficiency in PLC/SCADA programming, HMI development, and system integration with IT networks and facility equipment.
- Ability to read and create BOMs. visual aids, electrical schematics, control diagrams, and sequence of operations.
- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.
- Experience with critical infrastructure systems: UPS, generators, switchgear, chillers, CRAC/CRAH units, fire suppression systems.
- Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for new projects and revisions.
- Drive the development of system-level simulations and digital twins to validate control strategies before deployment
- Architect integration strategies for control systems with enterprise platforms such as SCADA, CMMS, and cloud-based monitoring tools
- Establish design patterns and best practices for modular and reusable control logic across projects
- Lead root cause analysis and resolution of complex control system issues during commissioning and operations
- Evaluate emerging technologies and automation trends to continuously improve system performance and efficiency
- Develop and maintain documentation for system architecture, control logic, and operational procedures
- Collaborate with electrical, mechanical, software, and facilities engineering teams to ensure seamless integration of control systems with physical infrastructure
- Work closely with cross functional teams to align control system designs with business requirements, timelines, and operational constraints
- Facilitate design reviews, technical workshops, and cross-functional planning sessions to ensure alignment and transparency across engineering disciplines
- Support commissioning and field teams during deployment, troubleshooting, and optimization of control systems
How will you get here?
Education:
- Bachelor’s Degree in Electrical Engineering or a relevant engineering discipline.
Experience:
- 8+ years pf experience in control system design and implementation
- Deep expertise in the following:
- PLC programming (Allen-Bradley, Siemens, Schneider Electric)
- Building Management Systems (BMS) integration and optimization
- Electrical Power Monitoring Systems (EPMS/EDPM) for real-time energy analytics
- Automatic Transfer Switches (ATS) control and failover logic
- Strong proficiency in control theory, system modeling, and simulation tools (MATLAB/Simulink)
- Experience with industrial protocols (Modbus, BACnet, OPC UA, Ethernet/IP)
- Familiarity with NFPA, IEC, and ISO standards related to control systems and safety.
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight as part of a global team
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices while mentoring less experienced engineers
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Excellent problem-solving skills and attention to detail
- Experience in EPlan, WindChill, SolidWorks, and DevOps are a plus
- Experience with hyperscale or colocation data center environments
- Familiarity with low and medium-voltage systems
Preferred Qualifications:
- Master’s Degree in Electrical Engineering or a relevant engineering discipline
- Active Professional Engineer (PE) license
- Experience in mission-critical environments such as data centers, manufacturing, or energy systems.
- Experience with digital twin modeling and predictive maintenance strategies.
Remote working/work at home options are available for this role.
temporary
DCI Test Development Engineer - Hybrid work flexibility (WASHINGTON)
🏢 JABIL CIRCUIT, INC
$105,100 - 189,200
Build your career with Jabil! We challenge and empower you to make most of your talents, working with outstanding colleagues from diverse backgrounds who share your drive and passion to make Jabil grow!
Location/Division Specific Information – Austin, TX / USA - Remote
**This position supports hybrid work schedule depending on organization needs.**
How will you make an impact? –
Jabil is seeking a DCI Test Development Engineer who will directly contribute to the transformative growth within our Enterprise and Infrastructure division by applying unique and innovative approaches to solving problems within a large-scale software and data center infrastructure. The DCI Test Development Engineer plays a vital role in ensuring the quality and reliability of hardware products, contributing to the overall success of the manufacturing process and customer satisfaction. You will be responsible for contributing to the end-to-end architecture, definition, development and production deployment of production software applications and data center infrastructure spanning multiple customers and manufacturing regions. You will also be responsible for interfacing with internal engineering, manufacturing and quality teams and our end customers to ensure your software deliverables meet the rigorous standards of Jabil’s world-class manufacturing environments.
What will you do?
- Test System Development: Design and develop test systems and procedures for manufacturing processes. This includes creating test plans, test cases, and test scripts to assess the functionality and performance of hardware.
- Develop and implement automated manufacturing test sequences in Python that interface with BMS and PLC hardware to validate the functional performance, communication protocols, and safety logic of liquid cooling equipment.
- Test Software Development: Create, validate, release, and maintain test software and scripts that automate the testing process. This software may include code for controlling test equipment, collecting and analyzing data, and generating test reports.
- Test Sustaining: Support and maintenance for the manufacturing server (L10) and rack (L11) level test software and infrastructure deployed at our production facilities, including the implementation of minor system configuration changes (new IPNs)
- Documentation: Maintain comprehensive documentation of test procedures, specifications, and Infrastructure
- Collaboration: Work closely with cross-functional teams, including hardware engineers, manufacturing engineers, controls engineer, and quality assurance personnel, to ensure alignment on testing requirements and quality standards
- Continuous Learning: Stay updated on the latest advancements in testing technologies, methodologies, and industry best practices to keep manufacturing processes competitive and up to date
- Definition and collaboration on overall test infrastructure and application architectures
How will you get here?
Education:
- BS degree in Electrical/Computer Engineering, Computer Science or related field is required
Experience:
- 5-8 years’ experience in a software manufacturing test development/sustaining with enterprise server, storage or networking products is required
- 10+ years of relevant experience in a software manufacturing test development/ sustaining with enterprise server, storage or networking products and some college coursework in lieu of a 4- yr. degree, will be considered
- Excellent verbal and written communication skills is required
Knowledge, Skills, Abilities:
- Expertise in the following programming/scripting languages: Python, Java, BASH. C, C++, experience a plus
- Linux development expertise with a solid understanding of its fundamentals: CentOS/Ubuntu
- Python for hardware automation, with a deep understanding of industrial communication protocols (Modbus, BACnet, or Ethernet/IP) and the ability to interpret P&IDs and electrical schematics for cooling systems; experience in designing physical test stations and sensor integration is highly preferred.
- Expertise in the creation and configuration (DHCP, PXE boot, nginx) of Virtual Machines (VMs) using VMWare
- Expertise with leading edge networking systems, hardware, software and protocols including but not limited to enterprise ethernet datacenter switching/routing L1, L2, and L3 (BGP, DHCP Relay, ECMP). Arista CloudVision is a plus
- Experience with code versioning tools (Git preferred)
- Strong knowledge of professional software engineering practices for the complete software development life cycle, including coding standards, code reviews, source control management, build processes, testing, and operations
- Ability to travel up to 10% globally as required
Remote working/work at home options are available for this role.
Location/Division Specific Information – Austin, TX / USA - Remote
**This position supports hybrid work schedule depending on organization needs.**
How will you make an impact? –
Jabil is seeking a DCI Test Development Engineer who will directly contribute to the transformative growth within our Enterprise and Infrastructure division by applying unique and innovative approaches to solving problems within a large-scale software and data center infrastructure. The DCI Test Development Engineer plays a vital role in ensuring the quality and reliability of hardware products, contributing to the overall success of the manufacturing process and customer satisfaction. You will be responsible for contributing to the end-to-end architecture, definition, development and production deployment of production software applications and data center infrastructure spanning multiple customers and manufacturing regions. You will also be responsible for interfacing with internal engineering, manufacturing and quality teams and our end customers to ensure your software deliverables meet the rigorous standards of Jabil’s world-class manufacturing environments.
What will you do?
- Test System Development: Design and develop test systems and procedures for manufacturing processes. This includes creating test plans, test cases, and test scripts to assess the functionality and performance of hardware.
- Develop and implement automated manufacturing test sequences in Python that interface with BMS and PLC hardware to validate the functional performance, communication protocols, and safety logic of liquid cooling equipment.
- Test Software Development: Create, validate, release, and maintain test software and scripts that automate the testing process. This software may include code for controlling test equipment, collecting and analyzing data, and generating test reports.
- Test Sustaining: Support and maintenance for the manufacturing server (L10) and rack (L11) level test software and infrastructure deployed at our production facilities, including the implementation of minor system configuration changes (new IPNs)
- Documentation: Maintain comprehensive documentation of test procedures, specifications, and Infrastructure
- Collaboration: Work closely with cross-functional teams, including hardware engineers, manufacturing engineers, controls engineer, and quality assurance personnel, to ensure alignment on testing requirements and quality standards
- Continuous Learning: Stay updated on the latest advancements in testing technologies, methodologies, and industry best practices to keep manufacturing processes competitive and up to date
- Definition and collaboration on overall test infrastructure and application architectures
How will you get here?
Education:
- BS degree in Electrical/Computer Engineering, Computer Science or related field is required
Experience:
- 5-8 years’ experience in a software manufacturing test development/sustaining with enterprise server, storage or networking products is required
- 10+ years of relevant experience in a software manufacturing test development/ sustaining with enterprise server, storage or networking products and some college coursework in lieu of a 4- yr. degree, will be considered
- Excellent verbal and written communication skills is required
Knowledge, Skills, Abilities:
- Expertise in the following programming/scripting languages: Python, Java, BASH. C, C++, experience a plus
- Linux development expertise with a solid understanding of its fundamentals: CentOS/Ubuntu
- Python for hardware automation, with a deep understanding of industrial communication protocols (Modbus, BACnet, or Ethernet/IP) and the ability to interpret P&IDs and electrical schematics for cooling systems; experience in designing physical test stations and sensor integration is highly preferred.
- Expertise in the creation and configuration (DHCP, PXE boot, nginx) of Virtual Machines (VMs) using VMWare
- Expertise with leading edge networking systems, hardware, software and protocols including but not limited to enterprise ethernet datacenter switching/routing L1, L2, and L3 (BGP, DHCP Relay, ECMP). Arista CloudVision is a plus
- Experience with code versioning tools (Git preferred)
- Strong knowledge of professional software engineering practices for the complete software development life cycle, including coding standards, code reviews, source control management, build processes, testing, and operations
- Ability to travel up to 10% globally as required
Remote working/work at home options are available for this role.
temporary
D
Quality Engineer 2 - Remote
Salary not disclosed
DivIHN (pronounced “divine”) is a CMMI ML3-certified Technology and Talent solutions firm.
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries about this opportunity, please contact one of our Talent Specialists, Hema, at (63 or Sri Balan at (63 Title
- Quality Engineer 2
- Remote Duration: 12 Months Location: Remote Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered.
Description: Summary: The main function of a quality engineer is to research and test the design, functionality, and maintenance of products, equipment, systems, and processes, and develop quality standards.
A typical quality engineer can read and interpret blueprints and evaluate product integrity and standards.
Job Responsibilities: Devises sampling procedures and designs and develops forms and instructions for recording, evaluating, and reporting quality and reliability data.
Establishes a program to evaluate the precision and accuracy of production equipment and testing, measurement, and analytical equipment and facilities.
May write training material and conduct training sessions on quality control activities.
May specialize in areas of quality control engineering, such as design, incoming material, process control, product evaluation, product reliability, inventory control, metrology, automated testing, software, research and development, and administrative applications.
Skills: Creativity, verbal and written communication skills, analytical and problem-solving ability.
Team player and detail-oriented.
Basic ability to read and interpret blueprints, technical drawings, schematics, and computer-generated reports.
Basic experience with computer applications and software related to the engineering field, such as Computer-Aided Design (CAD).
Education/Experience: Bachelor's degree in engineering required.
2-4 years of experience required.
About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
schematics, Computer Aided Design (CAD)
Remote working/work at home options are available for this role.
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries about this opportunity, please contact one of our Talent Specialists, Hema, at (63 or Sri Balan at (63 Title
- Quality Engineer 2
- Remote Duration: 12 Months Location: Remote Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered.
Description: Summary: The main function of a quality engineer is to research and test the design, functionality, and maintenance of products, equipment, systems, and processes, and develop quality standards.
A typical quality engineer can read and interpret blueprints and evaluate product integrity and standards.
Job Responsibilities: Devises sampling procedures and designs and develops forms and instructions for recording, evaluating, and reporting quality and reliability data.
Establishes a program to evaluate the precision and accuracy of production equipment and testing, measurement, and analytical equipment and facilities.
May write training material and conduct training sessions on quality control activities.
May specialize in areas of quality control engineering, such as design, incoming material, process control, product evaluation, product reliability, inventory control, metrology, automated testing, software, research and development, and administrative applications.
Skills: Creativity, verbal and written communication skills, analytical and problem-solving ability.
Team player and detail-oriented.
Basic ability to read and interpret blueprints, technical drawings, schematics, and computer-generated reports.
Basic experience with computer applications and software related to the engineering field, such as Computer-Aided Design (CAD).
Education/Experience: Bachelor's degree in engineering required.
2-4 years of experience required.
About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
schematics, Computer Aided Design (CAD)
Remote working/work at home options are available for this role.
Not Specified
jobs by
All jobs loaded