Engineering Structures Jobs in Davie Hybrid

The Broward County Board of County Commissioners is seeking qualified candidates for Engineering Unit Supervisor (Highway Construction and Engineering Division).

THIS JOB ANNOUNCEMENT WILL REMAIN OPEN UNTIL SUFFICIENT NUMBER OF APPLICATIONS ARE RECEIVED AND MAY CLOSE AT ANY TIME.



This position supports professionals responsible for managing capital and mobility advancement projects for Broward County's Highway Construction and Engineering Division. The ideal candidate will have experience coordinating with multiple entities, including municipalities, state agencies, and local authorities. Work involves the review, planning, and coordination of the design and construction of County capital and mobility advancement projects, including schedules, budgets, and staff assignments.

General Description
Performs advanced professional and supervisory engineering work in the design and review of a wide variety of engineering and environmental projects.
Works under administrative supervision, developing and implementing programs within organizational policies and reports major activities to executive level administrators through conferences and reports.
Minimum Education and Experience RequirementsRequires a Bachelor's degree from an accredited college or university with major coursework in civil engineering.

Requires six (6) years progressively responsible experience in professional engineering work related to roadway design and construction or closely related field, including two (2) years of supervisory experience.
Special Certifications and LicensesPossess and maintain Professional Engineer License in State of Florida for duration of assignment.

Preferences* Master's Degree in Civil Engineering, Public Administration or closely related field* Certified in the use of one (1) or more of the following engineering programs (i.e. ICPR, ASAD, HY-8, HEC-RAS, HEC-HMS, Synchro, HCS, IMSA), or similar
* Construction Training Qualification Program (CTQP) Certifications (Asphalt, Concrete, Earthwork, QC Manager, etc.)
* Professional Traffic Operations Engineer, Professional Surveyor & Mapper, General Contractor License, or similar
* Project Management Professional and/or Certified Public Manager
* Advanced Work Zone Traffic Control Training Certification
* At least ten (10) years of experience in design and construction of roadway/traffic projects
* At least five (5) years of experience in one (1) of the following specialized fields of engineering: Traffic Operations, Structures, Drainage, Geotechnical, Construction Management
* At least three (3) years of experience with MicroStation OpenRoads Designer (ORD)
* At least two (2) years of experience in governmental contract and procurement
* At least two (2) years of experience in the preparation of agenda items and/or resolutions

SCOPE OF WORK

The functions listed below are those that represent the majority of the time spent working in this class. Management may assign additional functions related to the type of work of the job as necessary.

Schedules, assigns, and supervises engineering design projects; directs and coordinates field surveys, plan design, preparation and review, cost estimate development, and specifications preparation; participates in the development and design and review of major and complex projects.

Supervises and participates in the analysis and review of engineering studies and designs prepared by professional consultants; prepares recommendations for the consideration of professional and administrative superiors and committees.

Supervises the preparation of right-of-way and construction plans for major thoroughfares; conducts studies and prepares reports on proposed locations for future major thoroughfares; maintains liaison with appropriate outside agencies concerning projects under consideration for construction.

Supervises and participates in the activities of construction engineers, inspectors, and materials technicians in the investigation and construction of water and sewer mains, roadways, structures, and related public work projects; prepares general and special specifications for contract construction; supervises the maintenance and analysis of payment estimates and records.

Oversees and performs the technical review of remedial action plans; oversees and administers environmental licensing programs.

Conducts special engineering studies and projects relating to technical and administrative aspects of the public works function; coordinates the utilization of computer technology as related to the engineering function.

Conducts long-range studies involving other departments, agencies, and organizations; prepares reports and recommendations; seals and signs engineering plans, drawings, and documents.

Performs related work as assigned.

Physical Demands

Physical demands refer to the requirements for physical exertion and coordination of limb and body movement.

Performs sedentary work that involves walking or standing some of the time and involves exerting up to 10 pounds of force on a regular and recurring basis or sustained keyboard operations.

Unavoidable hazards refer to the job conditions that may lead to injury or health hazards even though precautions have been taken.

Involves routine and frequent exposure to traffic; moving machinery.

Competencies

• Manages Complexity

• Decision Quality

• Balances Stakeholders

• Directs Work

• Plans and Aligns

• Optimizes Work Processes

• Ensures Accountability

• Builds Effective Teams

• Communicates Effectively

• Situational Adaptability

• Collaborates: Building partnerships and working collaboratively with others to meet shared objectives.
• Customer focus: Building strong customer relationships and delivering customer-centric solutions.
• Instills trust: Gaining the confidence and trust of others through honesty, integrity, and authenticity.
• Values differences: Recognizing the value that different perspectives and cultures bring to an organization.

Serve as the asset manager and contact person for internal, borrower, and third-party requests/concerns for assigned loans.

Proactive oversight and timely resolution of a portfolio of specially serviced CLO loans and other distressed debt assets.

Report to senior management updates on assigned loans.

Analyze property operating performance through review of operating statements, rent rolls and leases.

Evaluate and abstract loan documents.

Communicate effectively with internal and external parties including borrowers, legal counsel, property managers, other lenders, servicers, and other Rialto departments.

Negotiate complex transactions.

Perform research on various real estate markets throughout the U.S. and communicate with brokers in these markets.

Comprehensive analysis and understanding of loan collateral dynamics, value determination, and resolution alternatives.

Strong organizational skills with the ability to manage multiple priorities.

Prepare valuation and cash flow analysis on projected loan resolutions based on Borrower proposals including DCF / IRR / NPV scenarios for various strategies.

Underwrite potential new investment opportunities in CMBS, equity recapitalizations, asset/portfolio acquisitions, and mezzanine/preferred equity.

Prepare weekly, monthly, and quarterly reports for the executive team and outside parties.

Underwrite performing loan requests for reserve disbursements, lease approvals, loan extensions and other requests as needed and ensure all requests are handled in compliance with the terms of the related Loan Documents.

Bachelor's Degree from an accredited university is required, preferably in a related course of study like Commercial Real Estate or Finance.

Minimum of 5 years' experience in the workout of non-performing commercial real estate loans or debt asset management.

Advance knowledge of commercial real estate, fixed income, and general financial concepts.

Knowledge of bank, conventional, agency, and/or CLO origination and servicing is recommended.

Ability to underwrite commercial real estate and/or residential acquisition, development, and construction transactions, as well as possess excellent verbal and written communication skills.

High level proficiency working with Microsoft Excel, Word, and PowerPoint, in addition to a basic competency working with Argus and CRE Market Data Providers.

Strong work ethic and attention to detail.

Ability to manage time effectively while handling a variety of projects.

Prior credit/real estate underwriting experience.

The ideal candidate would have a strong understanding of loan documents or demonstrate the aptitude to quickly become familiar with loan documents.

Strong written and verbal communication skills.

Ability to multi-task and collaborate within a team setting.

Must be team-oriented and work well in a collaborative environment.

While performing the duties of this job, the Associate is occasionally required to stand; walk; sit; use hands to finger, handle, or feel objects, tools or controls; reach with hands and arms; climb stairs; balance; stoop. The Associate must occasionally lift and/or move up to 25 pounds. Evening or weekend work may be necessary to meet deadlines.

This description outlines the basic tasks and requirements for the position noted. It is not a comprehensive listing of all job duties.

Rialto Capital is committed to the principles of Equal Employment Opportunity. Our policy is to provide equal employment opportunity to all applicants and Associates without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity or expression, national origin, age (40+), disability, veteran status, genetic information (including family medical history), or any other legally protected status.

Our company uses E-Verify to confirm the employment eligibility of all newly hired employees.

To learn more about E-Verify, including your rights and responsibilities please visit: .

Doka USA is proud to be Certified™ by Great Place to Work®! We are committed to fostering a supportive work environment where all of our team members can thrive. As one of the world’s leading companies for developing, manufacturing, and distributing formwork solutions for the construction sector, Doka employs more than 9,000 people in over 58 countries and is part of the family-owned Umdasch Group.

We Make It Work.

As a Senior Project Engineer at Doka USA, you will be responsible for overseeing the planning, execution, and management of formwork projects from conception to completion. Leveraging your expertise in structural engineering, project management, and leadership, you will collaborate with cross-functional teams to deliver high-quality formwork solutions that meet project objectives, adhere to safety standards, and exceed client expectations. This will be an in-person role based out of our Davie, FL branch and will report into our Engineering Manager.

Responsibilities:

• Lead the planning and execution of formwork projects, including scheduling, resource allocation, and budget management, to ensure timely and successful project delivery.
• Conduct comprehensive site assessments and feasibility studies to determine project requirements, constraints, and risks.
• Develop detailed project plans, schedules, and budgets, and monitor progress against key milestones and deliverables.
• Coordinate with internal teams, subcontractors, and suppliers to procure materials, equipment, and resources required for project execution.
• Provide technical expertise and guidance to project teams, resolving complex engineering challenges and ensuring compliance with design specifications and regulatory requirements.
• Conduct regular site inspections and quality audits to assess workmanship, safety practices, and adherence to project plans and specifications.
• Manage client communications, addressing inquiries, concerns, and change requests in a proactive and professional manner.
• Prepare and review engineering drawings, calculations, and documentation, ensuring accuracy, completeness, and compliance with industry standards and regulations.
  
  

• Bachelor's degree in Civil Engineering, Structural Engineering, or a related field.
• Professional Engineer (PE) certification is required with the ability to stamp within the state of Texas.
• Proven experience in project engineering and management within the construction industry, with a focus on formwork-related projects.
• Strong knowledge of structural engineering principles, construction methodologies, and building codes.
• Proficiency in project management software, CAD software, and other relevant tools.
• Excellent leadership, communication, and interpersonal skills, with the ability to collaborate effectively with diverse stakeholders.
• Strong problem-solving and decision-making abilities, with a focus on delivering innovative and cost-effective solutions.
• Prior experience in formwork design, scaffolding, or related fields is preferred.
  
  

Doka offers terrific career opportunities, competitive compensation, comprehensive benefits including medical, dental, vision, Flexible Spending Account, company paid life insurance, supplemental voluntary term life insurance, 401k retirement plan (Roth and Non-Roth), short-term disability, AFLAC policies, paid time off (sick/personal, vacation, floating holiday and company paid holidays) and an exciting opportunity to join as a member of Doka's team.

If working with some of the most impressive construction projects in the US and joining an industry leader excites you, please submit your resume by clicking below. Visit us on-line at for additional information on Doka USA, Ltd.

Doka USA, Ltd. is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

If you are interested and have a strong competitive drive, positive attitude, a desire to learn and grow from your experiences, then this is your opportunity to make an immediate difference.

Please submit your resume and apply now.

External candidates must be authorized to work for any employer in the USA.

JOB TITLE: Electrical Install Assembler (Early Career) - Free Housing Support ($5K Relocation Bonus)
Location: On-site in North Charleston, SC
PAY RATE: $26-31/hour

We are a national aerospace and defense staffing agency seeking highly qualified candidates for a position with a top-tier client.

Job Details:

• 
  
• 
  

  Job Type: Contract (12 months with potential for extension)

  
  
  
• 
  

  Industry: Aerospace / Defense / Aviation

  
  
  
• 
  

  Benefits: Medical, dental, and vision (Cigna)

  
  
  
• 
  

  Perks: Bonus potential + Priority access via Tier 1 supplier

  
  
  
• 
  

  Openings Nationwide: Thousands of opportunities across the U.S.

  
  
  

Qualifying Questions:

• 
  
• 
  

  Are you a U.S. person as defined under ITAR regulations?

  
  
  
• 
  

  Do you meet the educational and experience requirements for this role?

  
  
  
• 
  

  Can you commute to the job location or relocate if necessary?

  
  
  

Summary:

• 
  
• 
  

  Route wire harnesses to supports per blueprint instructions and 787 specifications.

  
  
  
• 
  

  Build connectors, splice wires, crimp, and terminate wiring.

  
  
  
• 
  

  Install connectors to receptacles and electronic components.

  
  
  
• 
  

  Perform repairs and rework processes to incorporate authorized engineering changes.

  
  
  
• 
  

  Conduct fiber optic cleaning, inspection, light loss testing, routing, and installation.

  
  
  
• 
  

  Perform bond and ground operations, including CRNs, jumpers, ground stud installation, and resistance testing.

  
  
  

Requirements:

• 
  
• 
  

  High School Diploma or GED required; vocational school or Associate degree preferred.

  
  
  
• 
  

  6+ months of experience using software applications such as internet navigation, email, Microsoft Office, or other specialized programs.

  
  
  
• 
  

  6+ months of experience following detailed work instructions and interpreting blueprints, drawings, or specifications in English.

  
  
  
• 
  

  6+ months of experience in advanced manufacturing, technical, or mechanical environments using hand, power, or pneumatic tools.

  
  
  
• 
  

  6+ months of experience with structural parts fabrication and assembly processes.

  
  
  
• 
  

  Ability to perform tasks requiring bending, kneeling, crouching, standing, walking, climbing/balancing, reaching overhead, twisting, and head/neck rotation.

  
  
  
• 
  

  Ability to lift and carry up to 35 lbs.

  
  
  
• 
  

  Ability to work safely with high-hazard chemicals.

  
  
  
• 
  

  Must be able to work variable shifts (1st, 2nd, or 3rd) based on business need.

  
  
  
• 
  

  Must be a U.S. Citizen (as defined by ITAR).

  
  
  

About Us:

The Structures Company is a premier national aerospace and defense staffing agency specializing in contract, contract-to-hire, and direct hire placements. We deliver expert workforce solutions across engineering, IT, production, maintenance, and support roles.

As trusted partners to major aerospace OEMs and Tier 1 suppliers, we connect professionals with opportunities to grow and excel in the aviation and aerospace industries.

Eligibility Requirements:

Must be a U.S. Citizen, lawful permanent resident, or protected individual under 8 U.S.C. 1324b(a)(3) to comply with ITAR regulations.

Keywords: aerospace, aviation, engineering, maintenance, aircraft design, defense

Take your career to new heightsapply today!

The Building Engineer reports to the Lead Engineer and maintains a working relationship with and takes direction from all Property Managers in his/her area for issues affecting their properties. Issues may range from tenant improvement work to preventive maintenance and repair of all building systems. This must be done in a manner that not only protects, but also maximizes the value of the property. The Building Engineer must exhibit outstanding client service and professionalism in all interactions with tenants and RMR staff. Teamwork and collaboration are critical to this position's success. The portfolio currently consists of a large single tenant office building and a small mixed-use office building.

• Operate, maintain, and log all HVAC and MEP equipment under the direction of their supervisor.
• Complete tenant service requests, and develop and maintain positive tenant relations through prompt, courteous response to tenant requests.
• Perform preventive maintenance and repairs on HVAC equipment, plumbing and electrical systems, as directed by their supervisor. Duties include, but are not limited to changing filters, coil cleaning, greasing motors, replacing light bulbs & ballasts, inspecting/adjusting belts, and regular inspections of equipment
• Maintain computerized or manual equipment logs that detail preventive work performed.
• Clean and paint equipment and surrounding areas relating to equipment and equipment rooms.
• Assist in ordering stock and inventory of parts and supplies, as needed.
• Respond immediately to emergency situations and customer concerns.
• Review elevator maintenance records and confirm elevator maintenance is performed per national agreement. Inspect condition of elevator machine rooms. Report any elevator deficiencies to their supervisor.
• Assist with review of tenant improvement plans. Inspect active construction areas and confirm contractors are following all building rules and regulations.Coordinate fire alarm and sprinkler shutdown and drain downs with contractors as needed.
• Coordinate all quarterly fire alarm testing and maintenance with building vendor.
• Maintain and operate life safety/fire systems
• Perform carpentry and snow removal, if necessary.
• Take meter readings on all meters and equipment as directed by their supervisor.
• Perform minor repairs on doors, hardware, lock, windows, ceilings, and floors
• Troubleshoot, evaluate and make recommendations to upgrade maintenance operations and/or implement savings opportunities.
• Possess competent knowledge of the use and care of tools and equipment used in facility and ground maintenance.
• Inspect buildings, grounds and equipment for unsafe or malfunctioning conditions and report to management
• Inspect new installation for compliance with building codes and safety regulations
• Comply with all applicable codes, regulations, governmental agency and company directives, as related to building operations and practice safe work habits
• Daily communication with property management, engineering staff, security, tenants and contractors/vendors is vital.

General Maintenance and Operation Duties:

• Understand OSHA guidelines and how to ensure that all equipment is maintained to guidelines/standards.
• Read and follow written and oral instructions.
• Convey thoughts and recommendations orally and/or in writing to supervisors, contractors and others in order to resolve building-related problems.
• Operate and use necessary manual and power-driven tools.

• High school diploma or GED equivalent required.
• Minimum 3-5 years of building maintenance experience or commensurate experience in a trade (plumbing, electrical, HVAC).
• HVAC or electrical technical school training preferred.
• Applicable military experience or other related operations experience will be considered including power plants, multi-family, hotels, hospitals, facilities, etc.
• Experience with automated building management systems
• Ability to interpret mechanical, electrical blueprints and schematics
• Ability to work in a fast-paced environment, with the ability to multi-task and meet deadlines.
• Must be team oriented and a problem solver.
• Strong verbal and written communication skills.
• Manage own time on a daily basis with little supervision
• Must be able to handle multiple projects, changing priorities, and continually heavy workloads
• May be required to work extended periods of time without relief, when responding to priority/emergency situations (including overtime-type assignments)
• Stooping, standing, climbing and frequent lifting of a minimum of 50 lbs. of equipment (pump, tools, ladders) and ability to safely install rigging/lifting device
• Lift and carry objects of up to 50 lbs. for distances of up to 30 feet
• Climb ladders and stairs.
• Maintain professional appearance and manner at all times while in the complex.
• Will be required to perform off site duties through the use of a personal vehicle.
• Must have a valid driver's license.
• If, at any time, security clearance is required for your job (e.g. you are assigned to work at a property leased by the Federal government), being awarded such clearance will be a condition of your employment.

The RMR Group offers an extensive total rewards package to ensure that your benefits align with your needs. Employees who work at least 21 hours per week are eligible to participate in The RMR Group's benefits plans, including:

• Health Insurance
• Dental Insurance
• Vision Insurance
• Life & Disability Insurance
• Health Savings Account (HSA) & Flexible Spending Plans (FSA)
• 401(k) Plan with Employer Match
• Holidays, Vacation & Sick Time
• Parental Leave
• Tuition Assistance
• Matching Gift Program
• Wide Array of Voluntary, Employee-Paid Benefits to choose from including Critical Illness & Accident Insurance, Identity Theft Protection & Pet Insurance

The RMR Group (Nasdaq: RMR) is a leading U.S. alternative asset management company, unique for its focus on commercial real estate (CRE) and related businesses. RMR's vertical integration is strengthened by nearly 900 real estate professionals in more than 30 offices nationwide who manage approximately $40 billion in assets under management and leverage more than 35 years of institutional experience in buying, selling, financing and operating CRE. RMR benefits from a scalable platform, a deep and experienced management team and a diversity of real estate strategies across its clients. RMR has been recognized by The Boston Globe as a "Top Place to Work", by the Environmental Protection Agency (EPA) as an "ENERGY STAR Partner of the Year" and ranked by the Building Owners and Managers Association (BOMA) as having one of the highest number of BOMA 360 designated properties in its portfolio. RMR is headquartered in Newton, MA and was founded in 1986.

RMR's mission is to create long term value for our clients by managing their investments and assets "like we own it" - an approach that consistently and repeatedly generates opportunities for all our employees, investors and stakeholders. We are guided by six core values:

• Integrity at Our Core.
• Perform Passionately and Effectively.
• Inspired Thinking.
• Like We Own It.
• Power of We.
• Mutual Respect.

Visit our website to learn more about what makes The RMR Group a rewarding place to build a career.

Follow RMR on LinkedIn and Instagram @thermrgroup.

The RMR Group is an equal opportunity employer. Qualified applications will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. For our EEO Policy Statement, please click here. If you'd like more information on your EEO rights under the law, please click here.

A Senior Test Engineer job in Miramar, FL 33027 is currently available through Belcan at one of our key aerospace clients. This is a four‑month contract role with the potential to convert to a direct hire. To be considered for this role the candidate will need to have 3-5 years of relevant experience.

Description

The Test Design Engineer is responsible for creating and performing test automation activities consistent with the test lead and test development goals/objectives. This role requires knowledge/experience with automated test software, manufacturing test environment and the ability to interpret test requirements, implement requirement-based test methodologies and trouble shoot & debug test and product issues. Experience with FAA Part 145 in an MRO environment highly desired.

Job Duties:

Specific duties will include:

SW/HW debug, troubleshoot, upgrade and maintain product automated test equipment.

Requirements Analysis/Review for test-ability

Test procedure development, implementation, execution and failure root cause analysis.

Test planning and preparation.

Assess System performance against requirements

Develop code in Veristand, Teststand, LabVIEW to implement test GUIs, drivers and test requirements.

Perform verification and validation testing on developed Automated Test Equipment (ATE).

Perform sub-system testing from bench level CCA functional testing to system level burn in testing against an ATP/QTP.

Develop and refine system and board level test cases and procedures.

Trouble shoot subsystem and system level failures to root cause.

Design test fixtures & cables to enable testing.

Perform verification and validation testing on developed Automated Test Equipment (ATE).

Bench test CCAs and test electronic sub-assemblies and rack based test systems (instruments, cables and interfaces).

Trouble shoot subsystem and system level failures to root cause.

Gather, configure and use appropriate test equipment to perform task - Power supplies, DVM, Oscilloscope, electronic loads, custom cables, etc.

Interpret test requirements and electrical test results.

Read electrical schematics.

Test planning, preparation & execution

Required Qualifications:

3 to 5 years of experience

Strong interpersonal skills

Strong analytical skills

B.S. or M.S. in Electrical Engineering, Electrical Engineering Technology, or related discipline desired

Will consider equivalent years of relevant experience in lieu of a formal degree

Experience working with or developing Automated Test Equipment (ATE).

Experience in hardware and test equipment troubleshooting experience.

Knowledge of test automation (HIL) using National Instruments Labview, TestStand and Veristand

Can operate independently

Desired Skills:

Excellent verbal and written communication skills.

Experience working independently and in a collaborative environment

Ability to react to project adjustments and alterations promptly and efficiently

Ability to effectively prioritize and execute tasks in a high-pressure environment

Familiarity with electronic components and common electronic test equipment.

Experienced using lab test equipment, power supplies, DVM, Oscilloscope, electronic loads

Ability to interpret test requirements and electrical test results.

Ability to conduct detailed failure analysis and develop and implement root cause corrective actions.

Experience with GIT, Tortoise SVN, or equivalent software configuration management tools

Previous experience with CAN, UDS, RS232, RS422 & 1553 communication protocols.

Previous experience with programming languages such as C, C++ & C#.

Previous experience with Visual Studio.

Compensation:

This position is offering an salary rate of $52.88 - $62.50/hr, however, Belcan considers several factors when extending an offer, including but not limited to education, experience, geographic location, and discipline. Benefits offered may include health care, dental, vision, life insurance; 401(k); education assistance; paid time off including PTO, holidays, and any other paid leave required by law.

Belcan is an equal opportunity employer. Your application and candidacy will not be considered based on race, color, sex, religion, creed, sexual orientation, gender identity, national origin, disability, genetic information, pregnancy, veteran status or any other characteristic protected by federal, state or local laws.

This is a highly responsible position that supports the health, safety and welfare of Tribal members and the public. The incumbent in this position is responsible for managing the regulation and inspection of building construction, electrical, mechanical, and plumbing installations and directing compliance and enforcement of all related federal, state and local ordinances of the Seminole Tribe of Florida (STOF). Work involves technical review of all types of construction drawings, plans, and specifications to ensure compliance with applicable codes and ordinances. The incumbent provides general oversight, management, and leadership to building inspectors, plans examiners, and permit technicians as required and is responsible for the issuance of all permits and Certificates of Occupancy in accordance with the Florida Building Code and Tribal administrative policy. The person is also responsible for the administration of the Tribe’s elevator and commercial structure annual inspections programs.

The individual works closely with the Director of the Tribal Inspector’s Department to support all departmental programs and initiatives, including but not limited to the development of the departmental budget and strategic plans, development of building inspections processes and programs, evaluation and improvement of service delivery systems, and administration of the Tribe’s Unsafe Structures Ordinance Program. The incumbent may attend Tribal Council meetings or other community meetings and works with all necessary stakeholders to resolve complaints, address concerns, or solve problems as needed. Bachelor’s degree in Engineering, Building Construction, Civil Engineering, Architecture or related field is required. Master’s degree is preferred. A minimum of ten (10) years of experience as an Architect, Engineer, Building Inspector, Build Code Administrator, or Construction Superintendent with at least five (5) years being in a supervisory capacity is required; or, any equivalent combination of education, experience and training will be considered.

Prior experience with EnerGov software system is preferred. Possession and maintenance of a Building Code Administrator certification by the Florida Building Code Administrators and Inspector’s Board is required. Possession of a valid Florida Driver’s License is required. Must have excellent organizational and interpersonal skills including the ability to clearly communicate complex ideas in English both orally and in writing. Must be able to respond and commit to full duty operations during Hurricane or other emergency events. Demonstrate proficiency with Microsoft software programs. Demonstrate excellent organizational and interpersonal skills including English written and oral communication skills are required. Ability to travel and work a flexible schedule including evenings, weekends and holidays.

At Terumo we believe in the power of personal growth and will encourage you to get in the driver's seat - progressing in the direction you want to go by deepening your skills throughout your career. We want you to be bold, think outside the box, experiment, innovate and deliver what's next for quality healthcare. You will be part of a collaborative, respectful and resilient team of associates and leaders around the world, working together as partners to achieve more than you thought possible, providing real-world, impactful solutions for patients.

Join us and help shape wherever we go next!

Advancing healthcare with heart

Job Summary:

The Site Leader is responsible for setting the strategic direction and providing overall leadership for the Sunrise manufacturing site, ensuring operational excellence while supporting the organization’s broader business and growth objectives. This role leads the site leadership team and oversees manufacturing operations, manufacturing engineering, process development, sustaining engineering, and warehouse activities.

Through close partnership with functional leaders, the Site Leader ensures alignment and effective execution across key site functions, including quality, supply chain, finance, facilities, and human resources.

The Site Leader is accountable for delivering best-in-class operational performance while ensuring full compliance with all regulatory and corporate requirements. This role fosters a culture of continuous improvement, operational discipline, and talent development to position the Sunrise site as a high-performing, competitive manufacturing operation.

Job Details:

Strategic Leadership

• Establish and communicate the strategic vision for the Sunrise site aligned with divisional and corporate objectives.
• Build unity at the site and drive a culture reflecting our core values and financial discipline.
• Communicate effectively to the team and stakeholders based on facts and financials.
• Motivate the team on site to achieve a common goal to serving patients and meeting our strategic goals.

Operational Excellence

• Lead the development of a best-in class manufacturing organization utilizing modern manufacturing, engineering, and operational practices.
• Implement continuous improvement initiatives to enhance productivity, quality, service levels, and cost performance.
• Adopt automated tools to drive efficiency of operation and increase accuracy in inspection.
• Accelerate data collection and analysis to drive further improvement in operational efficiencies.

Cross-Functional Leadership

• Provide leadership and oversight for manufacturing and engineering while ensuring effective coordination with quality, supply chain, finance, facilities, and human resources.

Performance and Financial Management

• Develop site operating plans, key objectives, and budgets to guide and control operations.
• Monitor performance against goals and ensure achievement of production, cost, and financial targets.

Production and Delivery Execution

• Ensure production schedules and product shipments are executed on time, within budget, and in full compliance with quality and regulatory standards.

Talent Development and Organizational Leadership

• Build, develop, and lead a high-performing leadership team.
• Ensure effective recruitment, development, and succession planning to support long-term organizational capability.

Operational Planning and Forecasting

• Execute manufacturing strategies aligned with demand forecasts and business requirements.
• Analyze operational performance and implement corrective actions to ensure achievement of manufacturing and financial objectives.

Regulatory and Compliance Oversight

• Ensure full compliance with Terumo policies and procedures as well as all applicable FDA, ISO, GMP, and other regulatory requirements.

Capacity and Growth Planning

• Anticipate and plan for future capacity needs to support growth, product transfers, and potential mergers or acquisitions.
• Evaluate expansion opportunities, including facility expansion or new site build.

External and Regulatory Engagement

• Ensure site operations remain in full compliance with federal, state, and local regulatory authorities and maintain effective relationships with relevant agencies.

Additional Responsibilities

• Perform other duties consistent with the leadership and management of a large, regulated manufacturing site.

Position Requirements:

Knowledge, Skills, and Abilities (KSAs)

• Demonstrated leadership capability to set strategic direction, inspire teams, and deliver results through others.
• Strong interpersonal and influencing skills with the ability to coach, develop talent, and foster high-performing teams.
• Excellent verbal, written, listening, and presentation communication skills.
• Proven ability to lead organizational change, communicate effectively, and drive adoption of new processes or initiatives.
• Strong cross-functional collaboration skills with the ability to partner effectively across manufacturing, engineering, quality, supply chain, and commercial teams.
• Sound judgment and decision-making capability, including the ability to make timely decisions with incomplete information.
• Strong critical thinking, analytical, and problem-solving skills.
• Demonstrated project and operational leadership with the ability to prioritize initiatives and execute effectively.
• Ability to drive accountability and performance while creating a culture of urgency, ownership, and continuous improvement.
• Working knowledge of medical device regulatory and quality systems requirements, including FDA, GMP, ISO, and related standards.
• Financial acumen with the ability to manage budgets and drive cost-effective operational performance.
• Proficiency with standard business software including Microsoft Office (Word, Excel, PowerPoint, Outlook).

Background and Experience

• Bachelor’s degree in Engineering, Natural Sciences, or Business Administration required; advanced degree preferred, or equivalent combination of education and experience.
• Minimum 15 years of progressive experience in manufacturing, manufacturing engineering, or operations leadership required.
• Minimum 10 years of leadership experience managing manufacturing or engineering teams in a regulated environment.
• Experience within the medical device, pharmaceutical, or similarly regulated industry strongly preferred.
• Demonstrated experience leading multi-disciplinary teams across manufacturing, engineering, etc.
• Experience managing operational budgets and driving operational performance improvements.
• Proven track record of delivering results on schedule and within budget in a complex manufacturing environment.

Final compensation packages may be higher or lower than what is listed, and will ultimately depend on factors including relevant experience, internal equity, skillset, knowledge, geography, education, business needs and market demand. We provide competitive and comprehensive benefit options which include: annual bonus, paid vacation, paid holidays, health, dental and vision benefits, 401(k), with matching contributions, tax advantage savings accounts, legal plan, voluntary life and AD&D insurance, voluntary long-term disability, short term disability, critical illness and accident insurance, parental leave, personal leave, tuition reimbursement, travel assistance, and an employee assistance program. Salary range - $200,000 to 260,000

The Broward County Board of County Commissioners is seeking qualified candidates for Construction Project Management Supervisor.

THIS JOB ANNOUNCEMENT WILL REMAIN OPEN UNTIL SUFFICIENT NUMBER OF APPLICATIONS ARE RECEIVED AND MAY CLOSE AT ANYTIME.

The Construction Project Management Supervisor with the Seaport Facilities Maintenance Division is responsible for performing advanced professional and administrative work in managing maintenance projects for the Port Everglades Department. Specifically:

• Oversee water/sewer, stormwater design, construction, and other infrastructure to include regulatory compliance.
• Review as-built drawings, architectural, engineering plans, and specifications to ensure compliance with federal, state, and local building codes.
• Monitor and manage maintenance and capital projects
• Manages and supervises contractors and consultants in their performance and adherence to contract specifications; negotiates construction and consultant contracts, amendments, change orders, and work authorizations.
• Review plans and specifications of projects; proposals, engineering calculations, pay applications, permit packet and invoices.
• Reviews progress of maintenance projects and resolves construction-related issues; negotiates fees and scope with consultants. Signs and seals permit applications and drawings.
• Monitor and escort contractors and consultant throughout the Port to perform their services.
• Keep track of work orders in AIM to update notes, status, and pictures as required.
• Reviews bids for conformance to maintenance & construction specifications; administers and manages consultant and contractor contracts for adherence and performance; assists in the bidding process and contract packet development.
• Holds periodic meetings with contractors and consultants to review work progress and manages all aspects of the project.
• Reviews and approves proposals, invoices and payment requests from contractors and consultants; prepares vendor evaluations at the conclusion of projects. Monitor and oversee contractors goal assignment with OESBD (small business).
• Assists in the preparation of new fiscal year budget requests; carries out special assignments requested by the Division Assistant Director and performs related work as assigned.
• Coordinates with internal supervisor, Port Maintenance Manager, stakeholders, including Port users and County Agencies, i.e., County Attorney, Purchasing Division, Finance, Small Business, Risk Management, Operations, Security, BSO, Fire Rescue, Health Department, Water and Wastewater Department, other county agencies, local agencies, state, and federal agencies.
• Performs other related duties as required.
  
  

Works under administrative supervision, developing and implementing programs within organizational policies and reports major activities to executive level administrators through conferences and reports.

Engineering License OR Architectural License OR NCIDQ (Space Planning Only) based upon area of assignment.

The functions listed below are those that represent the majority of the time spent working in this class. Management may assign additional functions related to the type of work of the job as necessary.

Manages and monitors construction contractors and consultants; develops, administers and negotiates construction and consultant contracts, master plan studies, amendments, change orders, and work authorizations.

Coordinates stakeholders including user and County agencies: County Attorneys, Purchasing, Small Business Division, Building Departments; FDOT and other regulatory agencies.

Supervises other project managers and engineering technicians; performs reviews and oversight of projects managed by subordinates; reviews plans and specifications, engineering calculations, pay applications, invoices, and Florida Building Code.

Reviews project progress and resolves design and construction related issues; negotiates fees and scope with consultants; designs projects, signs and seals construction documents, permit applications and reports.

Assists with contract developments and bidding process; reviews bids for conformance to construction documents; administers and manages consultant and contractor contracts for adherence and performance.

Establishes a Quality Control/Quality Assurance (QC/QA) Project Program and procedures for the Project Management Section and the Division to standardize the project management process, improve quality and performance.

Carries out special assignments requested by Division Director; meets with subordinates to review the status of their assigned projects; prepares job performance evaluations for subordinates.

Conducts meetings with consultants and contractors to review progress of work and manage all aspects of the project; reviews and approves invoices and payment requests from consultants and contractors; assists in the preparation of new fiscal year budget requests.

Performs related work as assigned.

Physical Demands

Physical demands refer to the requirements for physical exertion and coordination of limb and body movement.

Performs light work that involves walking or standing most of the time and involves exerting up to 20 pounds of force on a regular and recurring basis, or skill, adeptness and speed in the use of fingers, hands or limbs on repetitive operation of electronic office equipment or tools within moderate tolerances or limits of accuracy.

Unavoidable hazards refer to the job conditions that may lead to injury or health hazards even though precautions have been taken.

None.

Competencies

• Financial Acumen

• Manages Complexity

• Decision Quality

• Balances Stakeholders

• Plans and Aligns

• Ensures Accountability

• Drives Results

• Develops Talent

• Communicates Effectively

• Situational Adaptability

• Collaborates: Building partnerships and working collaboratively with others to meet shared objectives.
• Customer focus: Building strong customer relationships and delivering customer-centric solutions.
• Instills trust: Gaining the confidence and trust of others through honesty, integrity, and authenticity.
• Values differences: Recognizing the value that different perspectives and cultures bring to an organization.

The Fullstack Lead Developer reports to the Senior Manager of Software Engineering and is responsible for leading the design, development, and delivery of complex software solutions across the product portfolio.

This role requires deep hands-on expertise in NextJS, React, Java, and database technologies, along with strong leadership capabilities. The ideal candidate brings extensive experience in fullstack architecture, DevOps practices, solution design, and performance optimization. This individual will lead engineering efforts from concept through production while mentoring developers and ensuring operational excellence.

Responsibilities:

· Lead end-to-end solution design and implementation from concept through production deployment.

· Architect and develop scalable, resilient, and high-performance applications.

· Provide technical leadership across frontend and backend development initiatives.

· Collaborate with Product teams to provide accurate effort estimation and planning.

· Ensure adherence to engineering standards, governance, and best practices.

· Coach and mentor engineers, fostering a culture of innovation and continuous improvement.

· Conduct code reviews and enforce high standards for quality, security, and maintainability.

· Design and document technical solutions, architecture decisions, and engineering patterns.

· Evaluate and recommend modern technologies and best practices aligned with business goals.

· Lead troubleshooting efforts for complex production issues, including performance bottlenecks and system failures.

· Partner with QA teams to define and execute robust testing strategies, including unit, integration, and regression testing.

· Ensure solutions align with enterprise architecture and integration standards.

· Manage effort tracking and identify cost optimization opportunities.

Required Qualifications:

· Bachelor’s or Master’s degree in Computer Science, Engineering, Information Technology, Mathematics, or related field.

· 7+ years of experience in Software Engineering with strong fullstack expertise.

· Advanced proficiency in NextJS, React, Java, and database technologies (SQL, MySQL preferred, plus non-relational databases such as MongoDB).

· Strong understanding of software architecture, design patterns, and modern development frameworks.

· Experience designing and building scalable, high-availability systems.

· Proven ability to lead technical initiatives and mentor engineering teams.

· Strong knowledge of application testing strategies and DevOps practices.

· Experience working in large, cross-functional, globally distributed teams preferred.

· Excellent troubleshooting, analytical, and problem-solving skills.

· Strong written and verbal communication skills.

Preferred Experience:

· Experience leading fullstack architecture initiatives across complex enterprise environments.

· Exposure to CI/CD pipelines and cloud-based deployment models.

· Experience evaluating and implementing optimization tools and lifecycle models.

· Strong understanding of cost management and engineering effort tracking.

*At Securian Financial the internal position title is Infrastructure Dir."

Mission

"To lead the engineering discipline that ensures Securian's technology platforms and cloud services are built and operated with uncompromising resilience, performance, and quality. This role drives the design and automation of fault-tolerant, high-availability architectures across AWS, Azure, and GCP-ensuring the enterprise meets resiliency, scalability, and efficiency expectations at every layer of technology."

Positioning

The Director of Resilience Engineering and Quality Leader is both a strategic peer and technical counterpart to the Infrastructure & Reliability Engineering Leader.

This role provides bench depth and succession coverage for REO's most technically complex domains while driving innovation in reliability, resilience, and performance practices.

• Strategic influence: Shapes cloud reliability, quality engineering, and resilience strategy across REO and Architecture domains.

• Operational authority: Leads Sr. Managers and Managers who own the execution of quality, resilience, and performance engineering capabilities.

• Enterprise collaboration: Works hand-in-hand with Technology, Solution, Business, Data, and Enterprise Architects to embed reliability and resilience as core architecture principles.

Scope of Accountability

Resilience Engineering & Cloud Reliability

• Architect and validate fault-tolerant, regionally resilient architectures across AWS, Azure, and GCP.

• Own resilience automation, chaos testing, and IaC-based recovery validation.

• Lead cross-cloud reliability design reviews and failure-mode analyses for critical systems.

Quality Engineering & Continuous Testing

• Define enterprise-wide quality engineering strategy integrated into CI/CD pipelines.

• Drive automation-first testing (functional, non-functional, performance, resilience).

• Embed observability-driven quality validation and contract testing across services.

Performance, Capacity & Efficiency Engineering

• Oversee predictive capacity planning, scaling automation, and cost/efficiency optimization (FinOps/GreenOps).

• Partner with Platform & Infrastructure teams to tune performance across application and platform layers.

• Measure and report on performance SLIs/SLAs aligned to REO's Reliability Metrics framework.

Cross-Domain Architecture Collaboration

• Partner with Enterprise Architects to codify resilience and reliability standards in technology blueprints.

• Collaborate with Technology & Solution Architects to design service reliability into delivery architectures.

• Engage Data Architects for data resilience, replication, and pipeline reliability.

• Work with Business Architects to align technical reliability goals with critical business outcomes.

Leadership & Talent Development

• Lead a team of Sr. Managers and Managers, fostering a high-performance, hands-on engineering culture.

• Build and mentor top-tier technical talent in cloud reliability, resilience, and quality automation.

• Partner with HR and REO Enablement to develop succession plans and technical competency frameworks.

Core Technical Competencies

• AWS (primary) - Multi-account design, HA architecture, region failover, resilience automation, Terraform/CDK/CloudFormation.

• Azure & GCP (secondary) - Compute, networking, and reliability constructs; hybrid cloud design and failover integration.

• Infrastructure as Code (IaC) - Deep proficiency in Terraform, policy-as-code (OPA/Conftest), drift detection, pipeline integration.

• Reliability & Chaos Engineering - AWS Fault Injection Simulator, Gremlin, steady-state hypothesis design.

• Observability & Quality Automation - OpenTelemetry, Prometheus, CloudWatch, K6, Gatling; CI/CD quality gates and dashboards.

• Performance Engineering - Load, stress, and soak testing automation; performance profiling and SLO alignment.

• Disaster Recovery Automation - Cross-region orchestration, IaC-driven DR runs, replication validation.

• FinOps/GreenOps - Cloud cost and efficiency automation, carbon-aware scaling policies.

Leadership Competencies

• Strategic Technical Leadership: Operates at the intersection of deep engineering and executive strategy.

• Multi-Domain Collaborator: Integrates reliability and resilience across architecture, operations, and business domains.

• Talent Multiplier: Develops and empowers senior managers, fostering engineering mastery and innovation.

• Credible Technical Authority: Trusted peer to Infrastructure & Reliability Engineering; capable of leading architecture reviews and executive briefings.

• Change Champion: Drives transformation of reliability practices across platforms, pipelines, and teams.

Qualifications & Experience

• 12+ years in cloud engineering, reliability, or platform leadership roles.

• 5+ years leading Sr. Managers/Managers in technical domains.

• Proven expertise across AWS, with working knowledge of Azure and GCP.

• Experience with multi-cloud governance, DR design, IaC at scale, and reliability automation.

• Strong understanding of observability, SRE principles, and REO/ITIL-aligned reliability frameworks.

• Certifications:

  • Required: AWS Certified Solutions Architect - Professional

  • Preferred: AWS DevOps Engineer, Azure Solutions Architect Expert, Google Professional Cloud Architect

Success Metrics

• 99.9% availability maintained for Tier-1 workloads.

• 100% coverage of DR automation for Tier-1 services.

• 25% annual increase in automated quality/test coverage.

• 15% annual improvement in resource efficiency and cost performance.

• Documented resilience participation across all enterprise architecture blueprints.

• Positive "technical peer readiness" and succession rating from Head of REO.

Summary Value Proposition

This Director role blends deep AWS reliability engineering expertise, multi-cloud technical breadth, and leadership scale.

It ensures REO maintains both technical depth and leadership redundancy, and it strengthens the bridge between engineering execution and enterprise architecture alignment.

#LI-hybrid **This position will be in a hybrid working arrangement.**

Securian Financial believes in hybrid work as an integral part of our culture. Associates get the benefit of working both virtually and in our offices. If you're in a commutable distance (90 minutes), you'll join us 3 days each week in our offices to collaborate and build relationships. Our policy allows flexibility for the reality of business and personal schedules.

The estimated base pay range for this job is:

Pay may vary depending on job-related factors and individual experience, skills, knowledge, etc. More information on base pay and incentive pay (if applicable) can be discussed with a member of the Securian Financial Talent Acquisition team.

Be you. With us. At Securian Financial, we understand that attracting top talent means offering more than just a job - it means providing a rewarding and fulfilling career. As a valued member of our high-performing team, we want you to connect with your work, your relationships and your community. Enjoy our comprehensive range of benefits designed to enhance your professional growth, well-being and work-life balance, including the advantages listed here:

Paid time off:

• We want you to take time off for what matters most to you. Our PTO program provides flexibility for associates to take meaningful time away from work to relax, recharge and spend time doing what's important to them. And Securian Financial rewards associates for their service by providing additional PTO the longer you stay at Securian.

• Leave programs: Securian's flexible leave programs allow time off from work for parental leave, caregiver leave for family members, bereavement and military leave.

• Holidays: Securian provides nine company paid holidays.

Company-funded pension plan and a 401(k) retirement plan: Share in the success of our company. Securian's 401(k) company contribution is tied to our performance up to 10 percent of eligible earnings, with a target of 5 percent. The amount is based on company results compared to goals related to earnings, sales and service.

Health insurance: From the first day of employment, associates and their eligible family members - including spouses, domestic partners and children - are eligible for medical, dental and vision coverage.

Volunteer time: We know the importance of community. Through company-sponsored events, volunteer paid time off, a dollar-for-dollar matching gift program and more, we encourage you to support organizations important to you.

Associate Resource Groups: Build connections, be yourself and develop meaningful relationships at work through associate-led ARGs. Dedicated groups focus on a variety of interests and affinities, including:

• Mental Wellness and Disability

• Pride at Securian Financial

• Securian Young Professionals Network

• Securian Multicultural Network

• Securian Women and Allies Network

• Servicemember Associate Resource Group

For more information regarding Securian's benefits, please review our Benefits page.

This information is not intended to explain all the provisions of coverage available under these plans. In all cases, the plan document dictates coverage and provisions.

Securian Financial Group, Inc. does not discriminate based on race, color, religion, national origin, sex, gender, gender identity, sexual orientation, age, marital or familial status, pregnancy, disability, genetic information, political affiliation, veteran status, status in regard to public assistance or any other protected status. If you are a job seeker with a disability and require an accommodation to apply for one of our jobs, please contact us by email at , by telephone (voice), or 711 (Relay/TTY).

To view our privacy statement click here

To view our legal statement click here