Engineering Structures Jobs in Davie Florida

This is a highly responsible position that supports the health, safety and welfare of Tribal members and the public. The incumbent in this position is responsible for managing the regulation and inspection of building construction, electrical, mechanical, and plumbing installations and directing compliance and enforcement of all related federal, state and local ordinances of the Seminole Tribe of Florida (STOF). Work involves technical review of all types of construction drawings, plans, and specifications to ensure compliance with applicable codes and ordinances. The incumbent provides general oversight, management, and leadership to building inspectors, plans examiners, and permit technicians as required and is responsible for the issuance of all permits and Certificates of Occupancy in accordance with the Florida Building Code and Tribal administrative policy. The person is also responsible for the administration of the Tribe’s elevator and commercial structure annual inspections programs.

The individual works closely with the Director of the Tribal Inspector’s Department to support all departmental programs and initiatives, including but not limited to the development of the departmental budget and strategic plans, development of building inspections processes and programs, evaluation and improvement of service delivery systems, and administration of the Tribe’s Unsafe Structures Ordinance Program. The incumbent may attend Tribal Council meetings or other community meetings and works with all necessary stakeholders to resolve complaints, address concerns, or solve problems as needed. Bachelor’s degree in Engineering, Building Construction, Civil Engineering, Architecture or related field is required. Master’s degree is preferred. A minimum of ten (10) years of experience as an Architect, Engineer, Building Inspector, Build Code Administrator, or Construction Superintendent with at least five (5) years being in a supervisory capacity is required; or, any equivalent combination of education, experience and training will be considered.

Prior experience with EnerGov software system is preferred. Possession and maintenance of a Building Code Administrator certification by the Florida Building Code Administrators and Inspector’s Board is required. Possession of a valid Florida Driver’s License is required. Must have excellent organizational and interpersonal skills including the ability to clearly communicate complex ideas in English both orally and in writing. Must be able to respond and commit to full duty operations during Hurricane or other emergency events. Demonstrate proficiency with Microsoft software programs. Demonstrate excellent organizational and interpersonal skills including English written and oral communication skills are required. Ability to travel and work a flexible schedule including evenings, weekends and holidays.

At Terumo we believe in the power of personal growth and will encourage you to get in the driver's seat - progressing in the direction you want to go by deepening your skills throughout your career. We want you to be bold, think outside the box, experiment, innovate and deliver what's next for quality healthcare. You will be part of a collaborative, respectful and resilient team of associates and leaders around the world, working together as partners to achieve more than you thought possible, providing real-world, impactful solutions for patients.

Join us and help shape wherever we go next!

Advancing healthcare with heart

Job Summary:

The Site Leader is responsible for setting the strategic direction and providing overall leadership for the Sunrise manufacturing site, ensuring operational excellence while supporting the organization’s broader business and growth objectives. This role leads the site leadership team and oversees manufacturing operations, manufacturing engineering, process development, sustaining engineering, and warehouse activities.

Through close partnership with functional leaders, the Site Leader ensures alignment and effective execution across key site functions, including quality, supply chain, finance, facilities, and human resources.

The Site Leader is accountable for delivering best-in-class operational performance while ensuring full compliance with all regulatory and corporate requirements. This role fosters a culture of continuous improvement, operational discipline, and talent development to position the Sunrise site as a high-performing, competitive manufacturing operation.

Job Details:

Strategic Leadership

• Establish and communicate the strategic vision for the Sunrise site aligned with divisional and corporate objectives.
• Build unity at the site and drive a culture reflecting our core values and financial discipline.
• Communicate effectively to the team and stakeholders based on facts and financials.
• Motivate the team on site to achieve a common goal to serving patients and meeting our strategic goals.

Operational Excellence

• Lead the development of a best-in class manufacturing organization utilizing modern manufacturing, engineering, and operational practices.
• Implement continuous improvement initiatives to enhance productivity, quality, service levels, and cost performance.
• Adopt automated tools to drive efficiency of operation and increase accuracy in inspection.
• Accelerate data collection and analysis to drive further improvement in operational efficiencies.

Cross-Functional Leadership

• Provide leadership and oversight for manufacturing and engineering while ensuring effective coordination with quality, supply chain, finance, facilities, and human resources.

Performance and Financial Management

• Develop site operating plans, key objectives, and budgets to guide and control operations.
• Monitor performance against goals and ensure achievement of production, cost, and financial targets.

Production and Delivery Execution

• Ensure production schedules and product shipments are executed on time, within budget, and in full compliance with quality and regulatory standards.

Talent Development and Organizational Leadership

• Build, develop, and lead a high-performing leadership team.
• Ensure effective recruitment, development, and succession planning to support long-term organizational capability.

Operational Planning and Forecasting

• Execute manufacturing strategies aligned with demand forecasts and business requirements.
• Analyze operational performance and implement corrective actions to ensure achievement of manufacturing and financial objectives.

Regulatory and Compliance Oversight

• Ensure full compliance with Terumo policies and procedures as well as all applicable FDA, ISO, GMP, and other regulatory requirements.

Capacity and Growth Planning

• Anticipate and plan for future capacity needs to support growth, product transfers, and potential mergers or acquisitions.
• Evaluate expansion opportunities, including facility expansion or new site build.

External and Regulatory Engagement

• Ensure site operations remain in full compliance with federal, state, and local regulatory authorities and maintain effective relationships with relevant agencies.

Additional Responsibilities

• Perform other duties consistent with the leadership and management of a large, regulated manufacturing site.

Position Requirements:

Knowledge, Skills, and Abilities (KSAs)

• Demonstrated leadership capability to set strategic direction, inspire teams, and deliver results through others.
• Strong interpersonal and influencing skills with the ability to coach, develop talent, and foster high-performing teams.
• Excellent verbal, written, listening, and presentation communication skills.
• Proven ability to lead organizational change, communicate effectively, and drive adoption of new processes or initiatives.
• Strong cross-functional collaboration skills with the ability to partner effectively across manufacturing, engineering, quality, supply chain, and commercial teams.
• Sound judgment and decision-making capability, including the ability to make timely decisions with incomplete information.
• Strong critical thinking, analytical, and problem-solving skills.
• Demonstrated project and operational leadership with the ability to prioritize initiatives and execute effectively.
• Ability to drive accountability and performance while creating a culture of urgency, ownership, and continuous improvement.
• Working knowledge of medical device regulatory and quality systems requirements, including FDA, GMP, ISO, and related standards.
• Financial acumen with the ability to manage budgets and drive cost-effective operational performance.
• Proficiency with standard business software including Microsoft Office (Word, Excel, PowerPoint, Outlook).

Background and Experience

• Bachelor’s degree in Engineering, Natural Sciences, or Business Administration required; advanced degree preferred, or equivalent combination of education and experience.
• Minimum 15 years of progressive experience in manufacturing, manufacturing engineering, or operations leadership required.
• Minimum 10 years of leadership experience managing manufacturing or engineering teams in a regulated environment.
• Experience within the medical device, pharmaceutical, or similarly regulated industry strongly preferred.
• Demonstrated experience leading multi-disciplinary teams across manufacturing, engineering, etc.
• Experience managing operational budgets and driving operational performance improvements.
• Proven track record of delivering results on schedule and within budget in a complex manufacturing environment.

Final compensation packages may be higher or lower than what is listed, and will ultimately depend on factors including relevant experience, internal equity, skillset, knowledge, geography, education, business needs and market demand. We provide competitive and comprehensive benefit options which include: annual bonus, paid vacation, paid holidays, health, dental and vision benefits, 401(k), with matching contributions, tax advantage savings accounts, legal plan, voluntary life and AD&D insurance, voluntary long-term disability, short term disability, critical illness and accident insurance, parental leave, personal leave, tuition reimbursement, travel assistance, and an employee assistance program. Salary range - $200,000 to 260,000

The Broward County Board of County Commissioners is seeking qualified candidates for Construction Project Management Supervisor.

THIS JOB ANNOUNCEMENT WILL REMAIN OPEN UNTIL SUFFICIENT NUMBER OF APPLICATIONS ARE RECEIVED AND MAY CLOSE AT ANYTIME.

The Construction Project Management Supervisor with the Seaport Facilities Maintenance Division is responsible for performing advanced professional and administrative work in managing maintenance projects for the Port Everglades Department. Specifically:

• Oversee water/sewer, stormwater design, construction, and other infrastructure to include regulatory compliance.
• Review as-built drawings, architectural, engineering plans, and specifications to ensure compliance with federal, state, and local building codes.
• Monitor and manage maintenance and capital projects
• Manages and supervises contractors and consultants in their performance and adherence to contract specifications; negotiates construction and consultant contracts, amendments, change orders, and work authorizations.
• Review plans and specifications of projects; proposals, engineering calculations, pay applications, permit packet and invoices.
• Reviews progress of maintenance projects and resolves construction-related issues; negotiates fees and scope with consultants. Signs and seals permit applications and drawings.
• Monitor and escort contractors and consultant throughout the Port to perform their services.
• Keep track of work orders in AIM to update notes, status, and pictures as required.
• Reviews bids for conformance to maintenance & construction specifications; administers and manages consultant and contractor contracts for adherence and performance; assists in the bidding process and contract packet development.
• Holds periodic meetings with contractors and consultants to review work progress and manages all aspects of the project.
• Reviews and approves proposals, invoices and payment requests from contractors and consultants; prepares vendor evaluations at the conclusion of projects. Monitor and oversee contractors goal assignment with OESBD (small business).
• Assists in the preparation of new fiscal year budget requests; carries out special assignments requested by the Division Assistant Director and performs related work as assigned.
• Coordinates with internal supervisor, Port Maintenance Manager, stakeholders, including Port users and County Agencies, i.e., County Attorney, Purchasing Division, Finance, Small Business, Risk Management, Operations, Security, BSO, Fire Rescue, Health Department, Water and Wastewater Department, other county agencies, local agencies, state, and federal agencies.
• Performs other related duties as required.
  
  

Works under administrative supervision, developing and implementing programs within organizational policies and reports major activities to executive level administrators through conferences and reports.

Engineering License OR Architectural License OR NCIDQ (Space Planning Only) based upon area of assignment.

The functions listed below are those that represent the majority of the time spent working in this class. Management may assign additional functions related to the type of work of the job as necessary.

Manages and monitors construction contractors and consultants; develops, administers and negotiates construction and consultant contracts, master plan studies, amendments, change orders, and work authorizations.

Coordinates stakeholders including user and County agencies: County Attorneys, Purchasing, Small Business Division, Building Departments; FDOT and other regulatory agencies.

Supervises other project managers and engineering technicians; performs reviews and oversight of projects managed by subordinates; reviews plans and specifications, engineering calculations, pay applications, invoices, and Florida Building Code.

Reviews project progress and resolves design and construction related issues; negotiates fees and scope with consultants; designs projects, signs and seals construction documents, permit applications and reports.

Assists with contract developments and bidding process; reviews bids for conformance to construction documents; administers and manages consultant and contractor contracts for adherence and performance.

Establishes a Quality Control/Quality Assurance (QC/QA) Project Program and procedures for the Project Management Section and the Division to standardize the project management process, improve quality and performance.

Carries out special assignments requested by Division Director; meets with subordinates to review the status of their assigned projects; prepares job performance evaluations for subordinates.

Conducts meetings with consultants and contractors to review progress of work and manage all aspects of the project; reviews and approves invoices and payment requests from consultants and contractors; assists in the preparation of new fiscal year budget requests.

Performs related work as assigned.

Physical Demands

Physical demands refer to the requirements for physical exertion and coordination of limb and body movement.

Performs light work that involves walking or standing most of the time and involves exerting up to 20 pounds of force on a regular and recurring basis, or skill, adeptness and speed in the use of fingers, hands or limbs on repetitive operation of electronic office equipment or tools within moderate tolerances or limits of accuracy.

Unavoidable hazards refer to the job conditions that may lead to injury or health hazards even though precautions have been taken.

None.

Competencies

• Financial Acumen

• Manages Complexity

• Decision Quality

• Balances Stakeholders

• Plans and Aligns

• Ensures Accountability

• Drives Results

• Develops Talent

• Communicates Effectively

• Situational Adaptability

• Collaborates: Building partnerships and working collaboratively with others to meet shared objectives.
• Customer focus: Building strong customer relationships and delivering customer-centric solutions.
• Instills trust: Gaining the confidence and trust of others through honesty, integrity, and authenticity.
• Values differences: Recognizing the value that different perspectives and cultures bring to an organization.

Fabrication Operations Manager - Custom

We’re looking for a hands-on Operations Manager who understands the thrill of custom fabrication, has the leadership strength to guide a team in a lean manufacturing environment, and the vision & ability to scale operations for rapid growth for a customized automotive operation.

REQUIRED QUALIFICATIONS

• 7+ years of experience in Fabrication & Assembly in an automotive operation
• Experience operating within and advancing lean manufacturing systems
• Ability to hold people accountable, with consequences.
• Strong sense of urgency and execution focus
• Ability to operate effectively in a dynamic, fast-paced environment
• Ability to manage multiple priorities and make sound decisions under pressure
• Disciplined, process-oriented mindset with a relentless focus on execution
• Proven ability to coach employees and collaborate cross-functionally

EDUCATION: BS degree in Engineering, Operations Management, or related.

KEY RESPONSIBILITIES

• Oversee all production operations, managing a team of ~80 employees across a single shift, 6 days per week.
• Ensure safety, compliance, quality, throughput, cost efficiency, and customer satisfaction.
• Develop & lead a robust safety program, including employee-led safety committees & personal accountability initiatives.
• Plan & manage daily/weekly production sequencing to ensure smooth vehicle flow.
• Identify & resolve disruptions to production flow to drive continuous improvement.
• Create & execute strategic plans using A3 thinking to address key improvement areas & align ops with business goals.
• Apply lean tools to stabilize operations, reduce waste & foster CI.
• Implement visual management, standardized work, and flow optimization.
• Build organizational discipline around lean practices through daily problem-solving, Gemba walks, 5S audits, and structured follow-up.
• Drive growth within the current facility. Break bottlenecks, add shifts as needed, and use KPIs to align workforce with customer needs.
• Maintain and enhance quality processes to minimize rework and maximize customer satisfaction, incorporating feedback loops.
• Hire, engage, and retain a high-performing workforce.
• Communicate clearly, reward excellence, and manage performance fairly.
• Partner with warehouse teams to resolve stock-outs, implement kitting strategies & maintain efficient inventory levels.

The Broward County Board of County Commissioners is seeking qualified candidates for Capital Project Management Supervisor - Construction Management Division.

Please Note: This announcement will remain open until sufficient number of applications are received and may close at any time.

The ideal candidate will have experience managing vertical construction projects with an aptitude for and an ability to manage a variety of challenging projects. The candidate will possess experience in preparation of scope, budget, schedule, documents for the selection of consultants, negotiating agreements, management of projects through all phases of development including planning, programming, design, bid documentation, procurement, construction administration, and warranty administration as well as the oversight of design consultants, contractors, and stakeholders.

The top candidate will have experience in the latest construction methods and technology including Building Information Modeling (BIM), document control programs, and scheduling programs. The ideal candidate will also be a LEED accredited professional or possess a WELL Building Standard accredited professional designation and experience along with an enthusiasm and passion for resiliency and sustainability.

General Description

Performs advanced professional and administrative work with supervisory responsibilities in the management of construction projects for the County.

Works under administrative supervision, developing and implementing programs within organizational policies and reports major activities to executive level administrators through conferences and reports.

Requires a Bachelor's degree from an accredited college or university with major coursework in architecture and/or engineering or closely related field; Master's degree preferred.

Requires six (6) years in professional architectural or engineering work, including four (4) years of experience in project management and supervision of staff appropriate to the area of assignment or closely related experience.

Registration as a professional architect or registered engineer or NCIDQ (Space Planning Only) based upon area of assignment.

Duties and Responsibilities

The functions listed below are those that represent the majority of the time spent working in this class. Management may assign additional functions related to the type of work of the job as necessary.

Manages and monitors construction contractors and consultants; develops, administers and negotiates construction and consultant contracts, master plan studies, amendments, change orders, and work authorizations.

Coordinates stakeholders including user and County agencies: County Attorneys, Purchasing, Small Business Division, Building Departments; FDOT and other regulatory agencies.

Supervises other project managers and engineering technicians; performs reviews and oversight of projects managed by subordinates; reviews plans and specifications, engineering calculations, pay applications, invoices, and Florida Building Code.

Reviews project progress and resolves design and construction related issues; negotiates fees and scope with consultants; designs projects, signs and seals construction documents, permit applications and reports.

Assists with contract developments and bidding process; reviews bids for conformance to construction documents; administers and manages consultant and contractor contracts for adherence and performance.

Establishes a Quality Control/Quality Assurance (QC/QA) Project Program and procedures for the Project Management Section and the Division to standardize the project management process, improve quality and performance.

Carries out special assignments requested by Division Director; meets with subordinates to review the status of their assigned projects; prepares job performance evaluations for subordinates.

Conducts meetings with consultants and contractors to review progress of work and manage all aspects of the project; reviews and approves invoices and payment requests from consultants and contractors; assists in the preparation of new fiscal year budget requests.

Performs related work as assigned.

• Financial Acumen: Interprets and applies key financial indicators to make better business decisions. Fosters accountability for making good financial decisions; provides guidance to help the team make astute decisions. Summarizes financial performance data and explains implications for the organization.
• Manages Complexity: Makes sense of complex, high quantity, and sometimes contradictory information to effectively solve problems. Asks questions to encourage others to think differently and enrich their analyses of complex situations. Accurately defines the key elements of complex, ambiguous situations.
• Decision Quality: Makes good and timely decisions that keep the organization moving forward. Consistently demonstrates strong judgment; may be sought out by others for expertise and guidance. Takes smart, independent action in urgent and non-routine situations, knows when to escalate for others' involvement.
• Balances Stakeholders: Anticipates and balances the needs of multiple stakeholders. Provides guidance so that others understand the needs of different stakeholders and can balance them appropriately. Makes sure people understand and adhere to ethical standards when working with stakeholders; models and ensures cross-cultural sensitivity.
• Plans and Aligns: Plans and prioritizes work to meet commitments aligned with organizational goals. Makes nimble plans accounting for a range of risks and contingencies. Achieves greater cohesion, integration, and alignment between own group and other areas. Both persistent in adversity and nimble in change.
• Ensures Accountability: Holds self and others accountable to meet commitments. Tracks performance and strives to remain effective, learning from both successes and failures. Readily takes on challenges or difficult tasks and has reputation for delivering on commitments.
• Drives Results: Consistently achieves results, even under tough circumstances. Emphasizes the importance of results; encourages a sense of urgency in others; challenges poor outcomes or unproductive behaviors. Provides assistance or encouragement to help others over obstacles.
• Develops Talent: Develops people to meet both their career goals and the organization's goals. consistently shares ideas, insight, and best practices to help people reach their development goals and achieve optimal results. Shares targeted feedback in a prompt, constructive, and encouraging manner.
• Communicates Effectively: Develops and delivers multi-mode communications that convey a clear understanding of the unique needs of different audiences. Tailors communication content and style to the needs of others. Pays attention to others' input and perspectives, asks questions, and summarizes to confirm understanding.
• Situational Adaptability: Adapts approach and demeanor in real time to match the shifting demands of different situations. Serves as an example of adaptability and provides guidance and support to help others adapt to new situations. Considers the needs of clients, constituents, and the organization; shifts priorities appropriately.

Physical Demands

Physical demands refer to the requirements for physical exertion and coordination of limb and body movement.

Performs light work that involves walking or standing most of the time and involves exerting up to 20 pounds of force on a regular and recurring basis, or skill, adeptness and speed in the use of fingers, hands or limbs on repetitive operation of electronic office equipment or tools within moderate tolerances or limits of accuracy.

Unavoidable hazards refer to the job conditions that may lead to injury or health hazards even though precautions have been taken.

None.

County Core Values

All Broward County employees strive to demonstrate the County's four core behavioral competencies.

• Collaborates: Building partnerships and working collaboratively with others to meet shared objectives.
• Customer focus: Building strong customer relationships and delivering customer-centric solutions.
• Instills trust: Gaining the confidence and trust of others through honesty, integrity, and authenticity.
• Values differences: Recognizing the value that different perspectives and cultures bring to an organization.

Copyright 2025 Korn Ferry. ALL RIGHTS RESERVED

Broward County is an Equal Opportunity Employer committed to inclusion. Broward County is committed to providing equal opportunity and reasonable accommodations to qualified persons with disabilities. We support the hiring of people with disabilities; therefore, if you require assistance due to a disability, please contact the Professional Standards Section in advance at or email to make an accommodation request.

Note: During emergency conditions, all County employees are automatically considered emergency service workers. County employees are subject to being called to work in the event of a disaster, such as a hurricane, or other emergency situation and are expected to perform emergency service duties, as assigned.

All Broward County employees must serve the public and fellow employees with honesty and integrity in full accord with the letter and spirit of Broward County's Employee Code of Ethics, gift, and conflict of interest policies.

All Broward County employees must establish and maintain effective working relationships with the general public, co-workers, elected and appointed officials and members of diverse cultural and linguistic backgrounds, regardless of race, color, religion, sex, national origin, age, disability, marital status, political affiliation, familial status, sexual orientation, pregnancy, or gender identity and expression.

Title: Facility Operations Manager

Location: Miami, FL (On-Site)

Schedule: Monday–Friday | 40 hours/week

Position Type: Long-Term Contract (12 Months - Potential for FT Conversion)

Pay Rate: $55 – $60/hour

We are seeking an experienced and highly motivated Facility Operations Manager to join a respected multinational organization responsible for managing and maintaining facilities for Miami-Dade County.

Position Overview:

• This role supports a large municipal-level facilities management contract in South Florida, overseeing daily building operations to ensure safety, compliance, reliability, and operational excellence.
• The Facilities Operations Manager is responsible for leadership of site teams, budget management, preventive maintenance programs, contract compliance, CMMS oversight, vendor performance, and stakeholder communication.
• This position requires strong leadership skills, financial discipline, regulatory awareness, emergency response capability, and the ability to manage multi-disciplinary facilities teams in a structured environment.
• Fluency in both English and Spanish is required to effectively communicate with workforce teams and stakeholders.

Key Responsibilities

• Provide day-to-day leadership and operational oversight of facility operations.
• Serve as the primary liaison for operational, contractual, and financial matters.
• Manage preventive maintenance programs across MEP systems (HVAC, electrical, plumbing, fire alarm, BAS, security systems).
• Ensure accuracy and completeness of CMMS data, including work orders, asset tracking, and PM schedules.
• Develop, manage, and monitor operating budgets and financial forecasts.
• Prepare and deliver monthly operational and financial reports.
• Track and report KPIs to ensure compliance with performance standards.
• Manage subcontractors and vendor relationships, including contract administration and cost control.
• Lead, mentor, and manage supervisors and operations staff.
• Respond to after-hours incidents and emergencies as required.
• Support asset lifecycle planning and capital improvement initiatives.
• Ensure compliance with OSHA, life safety, and regulatory requirements.

Qualifications

• Bachelor’s degree in business, engineering, construction management, or equivalent experience in a facilities management discipline with 10+ years of progressive responsibility.
• 10+ years of progressive experience in facilities management or building operations.
• 10+ years of leadership experience managing technical and operational teams.
• Proven experience managing operating budgets and financial reporting.
• Strong knowledge of MEP systems and preventive maintenance programs.
• Experience using CMMS platforms (Maximo, Yardi, Archibus, FMX, or similar).
• Experience managing vendor contracts and ensuring service-level compliance.
• Bilingual (English/Spanish) required.
• Working knowledge of OSHA and safety compliance standards.
• Proficiency in Microsoft Office (Excel, Word, PowerPoint, Outlook).

The Broward County Board of County Commissioners is seeking qualified candidates for Construction Project Manager-Crane Section at Port Everglades.



The Construction Project Manager in the Operations Division - Crane Section is responsible for performing advanced professional and administrative work in the design and management of crane improvement projects for the Port Everglades Department.

THIS JOB ANNOUNCEMENT WILL REMAIN OPEN UNTIL SUFFICIENT NUMBER OF APPLICATIONS ARE RECEIVED AND MAY CLOSE AT ANYTIME.

General Description

Performs advanced professional and administrative work in the design and management of construction projects for the County.

Works independently, under limited supervision, reporting major activities through periodic meetings.

Requires an associate degree from an accredited college or university with major coursework in architecture, civil engineering, construction management or closely related field.

Requires Eight (8) years of professional engineering and/or construction management experience relevant to the area of assignment or closely related experience.

Possess and maintain a valid Florida Class E Driver's License based on area of assignment.

Ability to secure and maintain a Transportation Worker Identification card (TWIC) within 60 days of employment and for the duration of employment.

• Bachelor's or master's Degree from an accredited college or university with major coursework in Architecture, Civil Engineering, Construction Management, or closely related field
• Project Management Professional (PMP) certification
• LEED certification
• Licensed Engineer in the State of Florida, or Licensed General or Building Contractor in the State of Florida
• 1+ years experience using AutoCAD
• 1+ years experience using Building Information Modeling (BIM)
• 5+ years of experience in governmental accounting and procurement processes
• 3+ years of experience gantry crane maintenance

Duties and Responsibilities

The functions listed below are those that represent the majority of the time spent working in this class. Management may assign additional functions related to the type of work of the job as necessary.

Develop and prepare engineering plans and designs for various crane improvement projects; estimate quantities and costs of such projects.

Assists consultants in the development of construction projects; issues work orders to consultants, surveyors and testing labs; reviews consultant's plans and specifications at various stages of development for conformance to design standards, completeness and accuracy; monitors consultant's cost estimates and verifies consultant's invoices and recommends payment.

Coordinates bid advertisements; schedules and assists in conducting pre-bid conferences; assists in evaluating bids and making recommendations for award of contract.

Schedules and assists in conducting pre-bid construction meetings with consultants, contractors and subcontractors; issues Notice to Proceed to contractors; reviews field inspection reports.

Assists in the preparation of schedules and monitors construction progress; assists in the preparation of change orders; maintains records of consultant's payments.

Assists in the inspection of projects for substantial completion and prepares punch list of any deficiencies; arranges for correction of defects by contractor during warranty period and conducts inspection at end of warranty period to ensure correction of defects.

Prepares required paperwork for capitalizing and closing the project; performs special investigations, sites analyses and feasibility studies as required and submits technical and management reports.

Meets with consultants, contractors, utility organizations, city, state, federal agencies, civic associations, business and community leaders, property owners and attorneys; assists with the preparation of the budget for capital expenditures.

Makes recommendations regarding hiring, discipline and promotions of subordinates; authorizes leave; evaluates employee performance.

Performs related work as assigned.

• Financial Acumen:Interprets and applies key financial indicators to make better business decisions. Determines and estimates the main direct and indirect costs; makes generally appropriate decisions regarding expenditures. Studies financial and quantitative information; uses data to improve performance.
• Manages Complexity:Makes sense of complex, high quantity, and sometimes contradictory information to effectively solve problems. Consistently looks at complex issues from many angles; obtains a rich and deep understanding; swiftly cuts to the core issue; skillfully separates root causes from symptoms.
• Decision Quality:Makes good and timely decisions that keep the organization moving forward. Knows when to act independently and when to escalate issues. Integrates various inputs, decision criteria, and trade-offs to make effective decisions. Typically makes good independent decisions.
• Balances Stakeholders:Anticipates and balances the needs of multiple stakeholders. Ensures that own efforts meet the needs and requirements of internal and external stakeholders. Works to identify all relevant issues and satisfy the interests of multiple stakeholders during the decision-making process.
• Plans and Aligns:Plans and prioritizes work to meet commitments aligned with organizational goals. Stays focused on plans and improvises in response to changes, including risks and contingencies. Aligns own team's work with other workgroups'. Looks ahead to determine and obtain needed resources to complete plans.
• Ensures Accountability:Holds self and others accountable to meet commitments. Accepts responsibility for own work, both successes and failures. Handles fair share and does not make excuses for problems. Usually meets commitments to others.
• Drives Results:Consistently achieves results, even under tough circumstances. Holds self to high standards of performance; sets some challenging goals; wants to achieve meaningful results; pursues initiatives/efforts to successful completion and closure. Focuses on key goals, even during setbacks and obstacles.
• Communicates Effectively:Develops and delivers multi-mode communications that convey a clear understanding of the unique needs of different audiences. Tailors communication content and style to the needs of others. Pays attention to others' input and perspectives, asks questions, and summarizes to confirm understanding.
• Situational Adaptability:Adapts approach and demeanor in real time to match the shifting demands of different situations. Sees even subtle cues to adapt; deploys a wide range of behaviors to stay effective. Exemplifies flexibility and resourcefulness; responds deftly to a variety of challenges and situations.

Physical Demands

Physical demands refer to the requirements for physical exertion and coordination of limb and body movement.

Performs light work that involves walking or standing most of the time and involves exerting up to 20 pounds of force on a regular and recurring basis, or skill, adeptness and speed in the use of fingers, hands or limbs on repetitive operation of electronic office equipment or tools within moderate tolerances or limits of accuracy.

Unavoidable hazards refer to the job conditions that may lead to injury or health hazards even though precautions have been taken.

Involves routine and frequent exposure to traffic; moving machinery.

County Core Values

All Broward County employees strive to demonstrate the County's four core behavioral competencies.

• Collaborates: Building partnerships and working collaboratively with others to meet shared objectives.
• Customer focus: Building strong customer relationships and delivering customer-centric solutions.
• Instills trust: Gaining the confidence and trust of others through honesty, integrity, and authenticity.
• Values differences: Recognizing the value that different perspectives and cultures bring to an organization.

Copyright 2025 Korn Ferry. ALL RIGHTS RESERVED

Broward County is an Equal Opportunity Employer committed to inclusion. Broward County is committed to providing equal opportunity and reasonable accommodations to qualified persons with disabilities. We support the hiring of people with disabilities; therefore, if you require assistance due to a disability, please contact the Professional Standards Section in advance at or email to make an accommodation request.

Note: During emergency conditions, all County employees are automatically considered emergency service workers. County employees are subject to being called to work in the event of a disaster, such as a hurricane, or other emergency situation and are expected to perform emergency service duties, as assigned.

All Broward County employees must serve the public and fellow employees with honesty and integrity in full accord with the letter and spirit of Broward County's Employee Code of Ethics, gift, and conflict of interest policies.

All Broward County employees must establish and maintain effective working relationships with the general public, co-workers, elected and appointed officials and members of diverse cultural and linguistic backgrounds, regardless of race, color, religion, sex, national origin, age, disability, marital status, political affiliation, familial status, sexual orientation, pregnancy, or gender identity and expression.

Title: Quality Engineer – CSV & Digital Systems

Davie, FL

Shift Details: Monday to Friday 8am – 5 pm (40 hours per week)

Assignment Duration: 6 months with possible extension

Convert to Perm: Depending on opens and performance

Core Essential skill sets (must have):

• Recent Master’s graduate Master's degree in Engineering, Computer Science, Life Sciences, or related field.
• Min 3 years experience in pharmaceutical or regulated manufacturing; out of which 2 years in quality organization
• Min 3 years hands-on CSV experience reviewing and approving validation documentation.
• Direct experience supporting manufacturing or utilities systems (not just lab systems).

Medical screening requirements:

Screenings:

1. Basic Bkg
2. 11 Panel drug + Fentanyl
3. Medical Screenings:
4. a) Vision Screen - Near, Far, Color, Depth and Peripheral
5. b) Spirometry & OSHA Respirator Questionnaire

Key Responsibilities:

Computer System Validation (CSV)

• Review and approve CSV lifecycle documents (VMP, URS, FRS, HDS, Risk Assessments, IQ/OQ/PQ, RTM, Summary Reports).
• Ensure risk-based validation approaches aligned with GAMP 5, 21 CFR Part 11, and Data Integrity (ALCOA+) principles.
• Evaluate system changes through change control, assessing GxP impact and validation requirements.
• Support periodic reviews and re-validation activities for existing systems.

Digital Systems & Platforms

• Act as Quality reviewer/approver for systems including:
• o MES / EBR platforms (e.g., Werum PAS-X or similar)
• o Historians (OSIsoft PI or equivalent)
• o Advanced analytics tools (Seeq, used for GxP trending)
• o Empower and other lab systems
• Review configurations related to data acquisition, time stamping, audit trails, access control, and electronic records/signatures.
• Ensure proper segregation between GxP vs non-GxP analytics use cases.

Data Integrity & Compliance:

• Assess and approve data flows, interfaces, and integrations between systems.
• Support regulatory inspections (FDA, EMA) and internal audits related to computerized systems.

Cross-Functional Collaboration

• Partner with Engineering, Automation, MS&T, IT, and Operations to:
• o Enable faster project execution with compliant validation strategies
• o Avoid over-validation while maintaining inspection readiness
• Provide Quality input during project design, FAT/SAT, and commissioning phases.

Required Qualifications:

Education:

• Master's degree in Engineering, Computer Science, Life Sciences, or related field.

Experience:

• 3-5 years experience in pharmaceutical or regulated manufacturing; out of which 2 years in quality organization
• 3+ years hands-on CSV experience reviewing and approving validation documentation.
• Direct experience supporting manufacturing or utilities systems (not just lab systems).

Required Technical Skills

• Strong working knowledge of:
• o CSV lifecycle & GAMP 5
• o 21 CFR Part 11 / Annex 11
• o Data Integrity (ALCOA+)
• Practical experience with:
• o MES / EBR systems
• o Process Historians (PI, etc.)
• o Advanced analytics platforms (Seeq) in a GxP context
• Ability to evaluate risk-based validation for dashboards, reports, and models.
• Familiarity with change control, deviations, and CAPA systems.

Preferred / Nice-to-Have

• Experience with:
• o Werum PAS-X, Seeq, PI Vision, Power BI (for regulated trending)
• o Agile or lean validation approaches
• o Commissioning & Qualification (C&Q) integration with CSV
• Prior involvement in:
• o FDA inspections related to computerized systems
• o Site digitalization or Industry 4.0 initiatives

Key Competencies

• Risk-based decision making with quality and compliance focus
• Strong documentation review and technical writing skills
• Ability to challenge constructively while remaining solution-oriented
• Comfortable working at the intersection of Quality, Engineering, and IT
• Pragmatic mindset: compliant and business-enabling

Who We’re Looking For

A proactive, technically fluent PMO leader who can turn vision into scoped, executable programs in dynamic, regulated environments. You’ve likely been a technical lead or systems engineer who moved into program management, and you’re comfortable representing customers while aligning teams to one shared, company-wide vision. You ask great questions, push decisions forward, and build clear plans that keep exceptional engineers informed and engaged.

You thrive in R&D - where the end solution isn’t fully known at the start—and you can define scope, iterate with customers, and translate ambiguity into a crisp plan, schedule, and delivery cadence. You love building software to support hardware/embedded systems, and you respect the rigor of regulated customers while balancing the pace and realities of a startup.

What You’ll Do

Program Leadership & Governance

• Stand up and mature PMO practices (charters, SoWs, WBS, RAID, RACI, change control, comms plans, dashboards).
• Drive decisions proactively; surface tradeoffs early; never “kick the can.”
• Build and manage integrated master schedules with critical path, dependencies, and resource views.

Customer Representation & Stakeholder Management

• Represent assigned customers/programs with a “one‑team” mentality—advocating for the customer while aligning to the broader company vision.
• Establish clear communication cadences, progress updates, and executive-ready reporting.

Scope, Requirements & Systems Thinking

• Convert customer needs into software/hardware/embedded requirements, acceptance criteria, and traceability (V&V).
• Define scope from ambiguity; create baselines; manage changes with discipline.
• Partner with systems engineers on interfaces, integration plans, and test strategies.

Agile Delivery & Tooling

• Stand up Jira projects/boards, workflows, and metrics; run Agile ceremonies across cross-functional teams.
• Use Jira (required) and MS Project/Smartsheet (strong preference) to align sprint goals with milestone deliverables.

Engineering Integration & Quality

• Coordinate integration testing across software, firmware, and hardware; manage entry/exit criteria for phases and gates.
• Ensure due diligence and documentation align with clients’ regulatory frameworks (e.g., quality systems, auditability).

Leadership & Team Enablement

• Mentor PMs/ICs; build healthy execution habits; promote transparency and accountability.
• Create templates, playbooks, and workflows that scale as new customers and projects launch.

What Makes You a Great Fit

• Technical foundation (e.g., Engineering, Computer Science, or equivalent experience) and the ability to break down complex technologies and projects.
• Hands-on experience delivering programs that combine software + hardware/embedded components.
• Strong Jira and Agile planning experience (required).
• Scheduling expertise in Microsoft Project and/or Smartsheet (high preference), including WBS, dependencies, and critical path.
• Experience defining scope from ambiguity and converting customer needs to actionable requirements.
• Proven cross-functional leadership across engineering, product, QA/validation, and operations.
• Clear, concise communication; excellent stakeholder management; proactive issue/risk management.

Nice to Have

• PMP/PgMP/PMI certification (strong plus, not strictly required).
• Prior experience in R&D, tech transfer, operations demos, or government/enterprise programs (e.g., NASA or tier‑1 product orgs).
• Exposure to regulated processes (e.g., phase‑gate, requirements traceability, verification/validation best practices).
• Familiarity with Confluence, requirements tools, and test management systems.

About Titan America

Titan America LLC (NYSE: TTAM), a TITAN Group Company, is one of the premier producers of cement and building materials in the eastern United States and the North American subsidiary of the TITAN Group. With a history spanning over 100 years, Titan America has consistently delivered innovation, operational excellence, and sustainable solutions. Our comprehensive portfolio—including cement, aggregates, fly ash, ready-mix concrete, and specialty admixtures—serves diverse customer needs across commercial, industrial, and infrastructure markets.

We have an excellent opportunity within our Procurement department at our Medley, Florida facility.

Primary Job Responsibilities/Tasks:

• As a “working manager” coordinate the daily direction of the team and prioritize weekly tasks, including requisitions from operations, their approval and ensure timely responsiveness.
• Delegate and lead RFQ/RFP processes, contract negotiations, and supplier performance evaluations to enhance Titan ‘s procurement strategy.
• Serve as operational liaison with aggregates & cement stakeholders on all projects related to capex, and/or outages ensuring bids tracking, communications, supplier involvement and execution
• Manage vendor selection, pricing analysis, and long-term contract negotiations to secure cost-effective, high-quality materials.
• Track backlog and overdue deliveries, ensuring compliance with supplier agreements and coordinate delivery schedules especially on outage or high priority projects
• Develop key performance indicators (KPIs) and dashboards using Power BI, SQL, and Advanced Excel techniques to provide data-driven insights
• Partner with finance teams to forecast procurement budgets, track savings, and enhance financial performance.
• Other duties as assigned by Supervisor or Management.
• Collaborate with warehouse and production teams to manage inventory levels efficiently.
• Stay updated on relevant regulations and ensure procurement activities comply with legal and compliance requirements. Leverage Avetta platform to manage supplier safety, insurance and business risk
• Provide analytics and reports with operational and management KPI’s as needed.
• Identify and mitigate potential risks associated with supplier selection and contracts on key projects serving as a liaison to the procurement and operations team in ensuring project delivery and milestone monitoring

Required skills and qualifications:

Qualifications:

• Bachelor's Degree + 4 years of Engineering, Supply Chain Management, Business Management, Related field OR
• Associate’s degree + 8 years of Engineering, Supply Chain Management, Business Management, Related field OR
• Strong proficiency in an ERP based environment), and Microsoft Excel for data analysis and reporting.
• Experience with supplier negotiations, and contract management.
• Proficient with all commonly used computer software, required.
• Excellent negotiation, communication, and stakeholder management skills.
• Proven ability to lead cross-functional teams and drive large-scale supply chain transformation projects.
• Ability to work independently, prioritize multiple projects, and make strategic decisions under pressure.
• Knowledge of SAP S4/HANA and EAM systems, preferred.
• Effective communication and people skills to collaborate with internal stakeholders

Join us in shaping the future of building materials with innovation, excellence, and sustainability at our core. Explore more about Titan America's transformative impact by visiting