Engineering Structures Jobs in Berthoud Larimer County Co Remote
422 positions found — Page 3
Develop table of compliance (TOC).
Act as the deal focal point of contact, and provide application engineering guidance to customers, channel partners, and internal stakeholders.
Lead the quoting process of Core and Complex Controls offerings.
Utilize available quoting tools, models, leverage existing technical libraries & materials, system configurations/hardware, design standards, etc., to develop tailored control system solutions.
Ensure accurate cost estimation including project risk management: (i) technical, (ii) execution, and (iii) commercial risks within the Inquiry to Order (ITO) process.
Coordinate with supply chain and third-party providers to obtain quotations for extended project scope.
Work with sales and pricing team to develop the competitive deal winning pricing & strategy.
Consolidate deal financials.
Present deals for commercial review board (CRB) for approvals and ensure ITO process compliance, including review of terms and conditions & risk management assessment.
Manage the tender schedule, and ensure timely internal approvals, bid submission and readiness for order booking.
Lead the techno-commercial proposal generation.
Participate in customer meetings, negotiation or presentations.
Manage the advance release and short cycle process.
Own project handover from ITO (inquiry-to-order) phase to OTR (order-to-remittance) phase to execution team upon receipt of PO or contract signature.
Attend technical and commercial trainings.
Contribute to continuous improvement of commercial process, proposal templates, application guides, and best practices in area of expertise.
Meet/Exceed Commercial KPI’s such as: Quality, Proposal Cycle Time, On Time Delivery, etc.
Requirements: Engineering degree, mechanical, electrical, electronic, power preferred.
Minimum 5 years’ experience in application/design/field commissioning services.
Strong experience in Industrial Control Systems.
Up to 30% travel required for short customer meetings and opportunity development.
Effective written and oral communication skills.
Effective use of Personal Computer Technologies.
Preferred Skills: Commercial and contractual expertise.
Experience in Unit Control (Gas Turbine, Steam Turbine, Aero, Hydro, Nuclear), DCS, Generator (Excitation/Static Starters), Human Machine Interface (HMI), Cyber Products.
Field service or Application Engineering experience of more than 5 years.
Experience in developing and writing specifications and/or proposals.
Creative solution and problem-solving skills.
Person with high energy and with high passion.
They will determine conditions under which tests are to be conducted, and phases of test operations.
They will coordinate operational, functional, and performance phases of tests.
They will also analyze and interpret test data, and prepare technical reports of for use by engineering personnel.
Position Qualifications: · 5-7 years of relevant testing experience · A minimum of an Associate’s Degree in Information Technology, Computer Science, or other relevant field; Bachelor’s Degree and/or relevant industry Certifications preferred Note: This is a W2 contract role – this role is NOT open to 1099, C2C, or 3 rd party candidates .
In this role, you will design and execute test scripts, analyze test results, and collaborate closely with firmware and system design teams to ensure product performance, reliability, and protocol compliance.
The ideal candidate has experience with firmware validation, automated test development, and debugging complex system interactions within embedded systems or storage technologies.
Key Responsibilities Design, implement, and debug automated test scripts for SSD firmware based on design specifications and feature requirements.
Develop and maintain grey-box, black-box, and white-box test cases to validate firmware functionality and system behavior.
Test firmware features including FTL/backend algorithms and cross-feature interactions under real-world workloads and stress conditions.
Execute functional, reliability, performance, and protocol-level validation testing.
Analyze test results and collaborate with firmware engineers to identify root causes and resolve issues.
Manage the end-to-end test development lifecycle in JIRA, including user stories, integration tasks, and defect tracking.
Ensure clear traceability between requirements, test cases, and reported defects.
Collaborate with global validation teams to align testing coverage and support customer-facing and system-level validation scenarios.
Contribute to improvements in validation tools, workflows, and processes to increase testing efficiency and defect detection.
Required Qualifications Experience in firmware testing, validation, or embedded systems testing.
Knowledge of automated test development and scripting.
Experience executing functional, performance, reliability, and protocol validation tests.
Familiarity with JIRA or similar issue tracking systems.
Strong debugging, analytical, and problem-solving skills.
Ability to collaborate effectively with firmware and system engineering teams.
Preferred Qualifications Experience testing SSD or storage firmware.
Understanding of FTL (Flash Translation Layer) or storage backend algorithms.
Familiarity with protocol compliance testing and system-level validation.
Experience working with cross-functional and global engineering teams.
Compensation $32.00 – $48.00 per hour Opportunity to work on advanced firmware and storage technology development.
If interested, please email your resume to No third party candidates
The Hardware Test & Instrumentation Engineer would be working for a major fortune 500 company and has career growth potential.
This is full time / 40+ hours per week.
*This is 100% on-site
- Must be local to Longmont, CO!
* Hardware Test & Instrumentation Engineer Compensation The pay for this position is $50-$55 per hour Based on Experience Benefits are available to full-time employees after 90 days of employment A 401(k) with a company match is available for full-time employees with 1 year of service on our eligibility dates Hardware Test & Instrumentation Engineer Highlights This position is a contract assignment with potential to hire on permanently based upon attendance, performance, and business needs The required availability for this position is Day Shift: Monday – Friday, 8am-5pm (8-hour shifts) About The Role: We are seeking an experienced Engineering Test & Instrumentation Engineer to support the development, testing, and calibration of instruments, equipment, and control systems.
This role will coordinate engineering testing activities, analyze performance data, and produce technical documentation to support engineering teams Requirements 5–7 years of engineering experience in testing, instrumentation, or systems engineering.
Experience coordinating and conducting engineering test operations .
Strong ability to analyze test data and generate technical reports .
Knowledge of instrumentation, control systems, and calibration processes .
Strong problem-solving and analytical skills.
Ability to collaborate with engineering teams and technical stakeholders.
Attendance is mandatory for the first 90 days Preferred Qualifications Bachelor’s degree in Engineering or related technical field Experience with product validation, equipment qualification, or system testing Hardware Test & Instrumentation Engineer Responsibilities Coordinate engineering test activities related to equipment, instrumentation, and control systems Support the development, procurement, installation, and calibration of engineering instruments and equipment Determine testing conditions and define phases of test operations Execute functional, operational, and performance testing of engineering systems Analyze and interpret test data generated from physical equipment and instrumentation Prepare technical reports and documentation for engineering teams Assist with equipment setup, system validation, and troubleshooting Collaborate with engineering teams to ensure testing meets performance and design specifications Maintain accurate records of testing procedures and results If you are interested please apply for immediate consideration with Silvana M.
with A-Line!
Company Description
Don's Custom Cabinets & Countertops, a family-owned business in Longmont, Colorado, has been providing high-quality craftsmanship and technical excellence for over 40 years. We specialize in turning home and remodeling visions into reality through a proven process that includes selection, quoting, template, fabrication, and installation. Our advanced technology, including a laser template and CNC equipment, ensures precision down to the finest detail, while our expert team customizes each project to fit client needs. Working with us means joining a tight-knit team where your contributions and ideas are valued.
Role Description
This is a full-time, on-site Manufacturing Engineering role based in Longmont, CO. The position's primary responsibility is to receive digital templates and create CNC programs to manufacture custom countertops. This includes nesting pieces onto slabs, creating digital renderings to demonstrate grain flow, and applying CNC toolpaths with intention to maximize runtime efficiency. Auxiliary responsibilities provide hands-on opportunities for the position, such as transportation of slabs via forklift and CNC operation/maintenance.
This is an opportunity to join a team of fabrication specialists and enjoy a balance between technical computer-based work and hands-on activities. The value of your work is visually apparent each day as raw materials are manufactured into high value products for the customer.
Training is provided on site and involves a rotational program to gain familiarity in relevant fields (Template, CNC Operation, Hand Polishing, Installations).
Qualifications
- Bachelor's degree in Engineering required, preference for mechanical/manufacturing
- Proficiency with CAD software
- Impeccable attention to detail and strong spatial reasoning
- Ability to collaborate and communicate effectively in a team setting
- Strong time management and planning skills
- Previous experience in a manufacturing or fabrication environment is beneficial
- Hands-on experience in any construction field is beneficial
Equipment Specifications
- Software: Alphacam, Slabmith, Moraware
- CNC Machine: Park Industries Titan Fabcenter (Saw and Router combination)
- Materials: Stone Countertops (Quartz, Granite, Quartzite, Marble, Soapstone, etc.)
Company Benefits/Job Details
- Weekly Hours: Monday - Friday, 7:00am - 4:00pm
- Paid holidays
- PTO accrual for sickness/medical appointments
- 401K Company Match
- Compensation: Salary range $65,000 - $80,000 with potential for bonus
*At Securian Financial the internal position title isEngineering Senior Analyst or Engineering Consultant. The title and salary will be determined based on experience and applied skills.*
Position Summary:
Are you a hands-on engineer who enjoys designing, building, and supporting modern communication platforms? Do you like solving complex problems and working with teams that move quickly from idea to delivery? This role offers the opportunity to make an immediate impact.
As a member of the Telephony and Contact Center Technologies team, you will design, engineer, implement, and support Securian's enterprise telephony and contact center platforms. This role is focused on delivering secure, scalable, cloud-first communication solutions using RingCentral, NiCE CXone, and Cyara.
You will work closely with Contact Center Operations, Agile delivery teams, and technology partners to continuously improve customer and associate experiences across the enterprise.
Responsibilities include but not limited to:
Design, engineer, implement, and support enterprise UCaaS and CCaaS platforms
Provide daily operational support for cloud-based telephony, unified communications, SIP services, and IVR solutions
Qualifications:
Hands-on experience engineering and supporting cloud-based telephony or contact center platforms
Strong understanding of VoIP technologies, SIP, and call routing concepts
RingCentral and RingCentral Contact Center engineering
NiCE inContact / CXone administration and development
Cyara or similar modern telephony orchestration platforms
Experience designing and supporting UCaaS and CCaaS (including IVRs and contact center workflows) solutions in large enterprise environments
Solid knowledge of networking concepts related to real-time communications
Preferred Qualifications:
Supporting remote contact center agents
REST API integrations and automation
Scripting using PowerShell or Python
Workforce management, call recording, or speech technologies
PSTN carrier and phone number lifecycle management
This role plays a critical part in modernizing Securian's communication platforms and ensuring reliable, scalable experiences for customers and associates. You will have the opportunity to influence technical direction and deliver compelling solutions that matter.
#LI-Hybrid**This position willhave a hybrid working arrangement.**
Securian Financial believes in hybrid work as an integral part of our culture. Associates get the benefit of working both virtually and in our offices. Ifyou'reina commutable distance (90 minutes)you'lljoin us 3 days each week in our offices to collaborate and build relationships. Our policy allows flexibility for the reality of business and personal schedules.
The estimated base pay range for this job is:
$72,000.00 - $134,000.00Pay may vary depending on job-related factors and individual experience, skills, knowledge, etc. More information on base pay and incentive pay (if applicable) can be discussed with a member of the Securian Financial Talent Acquisition team.
Be you. With us. At Securian Financial, we understand that attracting top talent means offering more than just a job - it means providing a rewarding and fulfilling career. As a valued member of our high-performing team, we want you to connect with your work, your relationships and your community. Enjoy our comprehensive range of benefits designed to enhance your professional growth, well-being and work-life balance, including the advantages listed here:
Paid time off:
We want you to take time off for what matters most to you. Our PTO program provides flexibility for associates to take meaningful time away from work to relax, recharge and spend time doing what's important to them. And Securian Financial rewards associates for their service by providing additional PTO the longer you stay at Securian.
Leave programs: Securian's flexible leave programs allow time off from work for parental leave, caregiver leave for family members, bereavement and military leave.
Holidays: Securian provides nine company paid holidays.
Company-funded pension plan and a 401(k) retirement plan: Share in the success of our company. Securian's 401(k) company contribution is tied to our performance up to 10 percent of eligible earnings, with a target of 5 percent. The amount is based on company results compared to goals related to earnings, sales and service.
Health insurance: From the first day of employment, associates and their eligible family members - including spouses, domestic partners and children - are eligible for medical, dental and vision coverage.
Volunteer time: We know the importance of community. Through company-sponsored events, volunteer paid time off, a dollar-for-dollar matching gift program and more, we encourage you to support organizations important to you.
Associate Resource Groups: Build connections, be yourself and develop meaningful relationships at work through associate-led ARGs. Dedicated groups focus on a variety of interests and affinities, including:
Mental Wellness and Disability
Pride at Securian Financial
Securian Young Professionals Network
Securian Multicultural Network
Securian Women and Allies Network
Servicemember Associate Resource Group
For more information regarding Securian's benefits, please review our Benefits page.
This information is not intended to explain all the provisions of coverage available under these plans. In all cases, the plan document dictates coverage and provisions.
Securian Financial Group, Inc. does not discriminate based on race, color, religion, national origin, sex, gender, gender identity, sexual orientation, age, marital or familial status, pregnancy, disability, genetic information, political affiliation, veteran status, status in regard to public assistance or any other protected status. If you are a job seeker with a disability and require an accommodation to apply for one of our jobs, please contact us by email at , by telephone (voice), or 711 (Relay/TTY).
To view our privacy statement click here
To view our legal statement click here
Remote working/work at home options are available for this role.
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Supports the Test Engineer in the development and commission of test solutions executing the test qualification of the fixture and program as per the specific system qualification process.
· Responsibility for providing the deliverables to support the solution in production to both the Test Support Function and Manufacturing Operations.
· Assists in the build and manufacture of testers, fixtures and environmental tooling as required to meet the customer expectations.
· The Technician Engineer provides the interface to the Test Support function providing comprehensive documentation and training for all test solutions implemented.
· Provides the interface to the Manufacturing function providing comprehensive documentation and coordinating training and education for all test operations implemented.
· Through working with the Test Support function monitor and contribute to the improvement of Test Yields, Efficiency, Intermittencies and Uptime providing accurate reporting and clear targets for improvement.
· In conjunction with the Test Engineer strives to consistently upgrade the test process balancing cost, coverage with the goal of providing an optimized and cost efficient test process.
· Works closely with manufacturing and test support to ensure prioritization of support activities. He/ She will be responsible for coordinating the timetable for test readiness based on the weekly production schedule through the appropriate Test Support staff.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.
This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.
What will you do?
- Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.
- Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.
- Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.
- Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.
- Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.
- Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.
- Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).
- Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.
- Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.
- Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.
- Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.
- Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.
- Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.
- Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.
- Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.
MINIMUM QUALIFICATIONS
Education:
- Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.
Experience:
- 8 years' experience in mechanical design and integration of mission-critical systems.
- Proven track record of successful system designs and implementations in a relevant industry
- Strong understanding of mechanical systems, integration strategy, and system coordination
- Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.
- Excellent problem-solving skills and attention to detail
- Strong communication and teamwork abilities
PREFERRED QUALIFICATIONS
- Master’s Degree in Mechanical Engineering
- Professional Engineer (PE) License
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 30% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.
This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.
What will you do?
- Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.
- Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.
- Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.
- Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.
- Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.
- Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.
- Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).
- Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.
- Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.
- Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.
- Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.
- Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.
- Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.
- Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.
- Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.
MINIMUM QUALIFICATIONS
Education:
- Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.
Experience:
- 8 years' experience in mechanical design and integration of mission-critical systems.
- Proven track record of successful system designs and implementations in a relevant industry
- Strong understanding of mechanical systems, integration strategy, and system coordination
- Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.
- Excellent problem-solving skills and attention to detail
- Strong communication and teamwork abilities
PREFERRED QUALIFICATIONS
- Master’s Degree in Mechanical Engineering
- Professional Engineer (PE) License
Remote working/work at home options are available for this role.
