Engineering Structures Journal Jobs in Wethersfield, CT

Provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service to general and various specialized diagnostic and therapeutic medical equipment, as assigned by the Clinical Engineering (CE) Manager.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users, CE Managers, and Regional Director of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines)  to order parts and supplies required for emergency service or repair  of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

Associates of Applied Sciences degree in medical electronics, electronic technology or related field, including comparable military training or an equivalent combination of education and experience. CBET certification preferred.

Three (3) to five (5) years' experience  performing corrective and planned maintenance on medical devices and/or clinical support equipment. 

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and  test equipment specific to the field.  Ability to train CE associates  on use and application of select test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and  Clinical Engineering. 

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to follow complex written instructions, perform tasks and document actions taken.

 Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes. .

Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service to general and various specialized diagnostic and therapeutic medical equipment, as assigned by the Clinical Engineering (CE) Manager.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users, CE Managers, and Regional Director of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines)  to order parts and supplies required for emergency service or repair  of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

Associates of Applied Sciences degree in medical electronics, electronic technology or related field, including comparable military training or an equivalent combination of education and experience. CBET certification preferred.

Three (3) to five (5) years' experience  performing corrective and planned maintenance on medical devices and/or clinical support equipment. 

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and  test equipment specific to the field.  Ability to train CE associates  on use and application of select test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and  Clinical Engineering. 

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to follow complex written instructions, perform tasks and document actions taken.

 Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes. .

Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

ACCOUNTABILITY:

The position of Cell Leader is a key catalyst on a manufacturing Cell Team, who works in conjunction with Process Engineering, Quality Engineering, and hourly Cell associates to manufacture or assemble a component or major assembly. As such, this individual must supervise a group or groups engaged in various activities in the Operations organization, and act with urgency to direct the resolution of technical and logistics problems and the introduction of measures to improve operations and customer relations.

TYPICAL DUTIES:

• 
  
• Set work priorities aligned to satisfy company, customer demand and on-time delivery metrics. Collaborate with planner and peer Cell Leaders to schedule work through the various manufacturing work centers and manage work center to assure adequate flow of production. Manage line balance ensuring the pacing process is adequately staffed to maintain desired output levels. Hold direct reports accountable to meet Operating, OTD, Quality, and Safety metrics. Ensure direct reports are fully engaged performing value added work.
  
• Develop and implement action plans to meet department goals in the areas of labor efficiency, labor utilization, housekeeping, on-time delivery and productivity improvements. Perform regular daily audits of key processes to ensure optimum process performance and use of latest operation sheets,
  
• Maintain department/cell metrics. Ensure all direct reports understand their cell metrics and how they impact/improve each metric. Monitor Utilization rate in cell is at acceptable level (direct vs. indirect), Labor Efficiency (by person, by job), Quality Performance (Maintain Quality log), enforce work rules (breaks, cell phones, newspapers, etc.), ensure TPM/PM is being completed.
  
• Coach direct reports in maintaining accurate reporting of employee time, vouchering and work performance within the area. Develop and maintain Skills Matrix for accurate identification of workforce capabilities and cross train to support business need.
  
• Encourage employee involvement in and ownership of continuous improvement activities focused on LEAN and waste reduction. Implement and maintain 6S in Cell.
  
• Develop, plan and implement continuous quality improvement through teams within the area of responsibility to attain World Class Quality. Ensure PDR's are written quickly & thoroughly. Initiate PRB review on suspect parts in a timely manner. Support weekly PRB meetings to determine RCCA and develop rework scenarios where possible. Respond to production problems by personally investigating and resolving such problems with hourly and salaried personnel to assure a continuing flow of product. Utilize formal problem solving methodologies to discover and eliminate root cause.
  
• Actively participate, recommend, and initiate improvement in our EH&S practices and procedures.
  
• Reward and recognize associates on a regular basis and support programs that encourage employee involvement and recognition.
  

QUALIFICATIONS:

• 
  
• 5-10 years' experience working in an aerospace manufacturing environment
  
• Prior experience in a unionized facility is preferred
  
• Proficient in Microsoft Office applications
  
• Excellent process and problem solving skills
  
• Effective communication skills, including verbal (logical and organized), written, listening and presentation
  
• Experience with ERP systems
  
• Team player with strong people skills
  
• Ability to communicate with and influence employees and management at all levels
  
• Decisive and capable of dealing with conflict and resolving issues promptly
  
• Take charge individual with clear sense of urgency
  
• Proven track record of meeting commitments with the highest standards of ethics and integrity
  
• Demonstrated experience in continuous improvement initiatives, root cause corrective action methodology, visual factory management, statistical process control techniques, quality assurance processes, coaching and performance management, safety practices, operations metrics/dashboard measurement.
  

EDUCATION:

• 
  
• Bachelor's degree in Operations Management, Business Management or equivalent work experience will be considered.
  

This position is currently accepting applications.

Apply Now

The Lean Specialist will drive operational excellence by identifying, analyzing, and eliminating waste across business processes. This role involves leading cross-functional teams, implementing Lean methodologies (such as 5S, Kaizen, VSM), and fostering a culture of continuous improvement to enhance productivity, quality, and cost savings.

Key Responsibilities

• 
  
• Process Improvement: Lead, facilitate, and support Lean Six Sigma projects and Kaizen events to streamline operations, reduce defects, and improve flow.
  
• Value Stream Mapping (VSM): Conduct detailed VSM to analyze current state, map future state, and identify inefficiencies (waste).
  
• Training & Coaching: Provide coaching and training to staff on Lean tools, principles, and standard work to embed a continuous improvement mindset.
  
• Data Analysis & Reporting: Utilize data-driven insights and statistical tools to measure KPI improvements, tracking savings and results for senior management.
  
• Standardization: Implement and sustain 5S, Kanban, and Standard Operating Procedures (SOPs) to ensure consistent, efficient performance.
  
• Gemba Walks: Perform regular Gemba walks to identify abnormalities, support employees on the shop floor, and identify improvement opportunities.
  
  

Key Skills & Qualifications

• 
  
• Lean Expertise: Deep understanding of Lean principles, Six Sigma methodologies, Kaizen, and waste reduction techniques (8 Wastes).
  
• Analytical Skills: Strong ability to analyze complex data sets to identify trends, root causes, and solutions, with proficiency in tools like Excel, Minitab, or Visio.
  
• Project Management: Proven ability to manage multiple projects simultaneously from inception to completion.
  
• Leadership & Change Management: Exceptional ability to lead cross-functional teams and drive cultural change within an organization.
  
• Communication: Excellent verbal and written skills to interact with diverse groups, including shop floor staff and executive leadership.
  
• Facilitation: Ability to lead workshops and brainstorming sessions effectively.
  

Education & Experience Requirements

• 
  
• Education: Bachelor's degree in Engineering, Business Administration, Operations Management, or a related field.
  
• Experience: 3-5+ years of experience in Lean manufacturing, operational excellence, or continuous improvement roles.
  
• Certification: Lean Six Sigma Green Belt or Black Belt certification is highly desirable.
  

This position is currently accepting applications.

Apply Now

Company Description:

Hanwha Aerospace USA has long been recognized as a leader in the development and supply of flight critical Aerospace/Defense components and assemblies. Operating out of four state-of-the-art facilities located in Connecticut, Hanwha Aerospace USA offers growth and career development opportunities to enrich your talents.

Summary:

We are seeking a skilled and detail oriented Production Supervisor in our Glastonbury location to plan, direct, and coordinate all assigned operations following manufacturing objectives. As a Production Supervisor, you will manage and provide direction to departmental personnel in implementing modern, cost-effective practices to achieve the goals of the department according to all safety, quality, housekeeping, and production standards. This position will supervise all personnel and operations in the department by employing leadership, hands-on technical support, scheduling, and project management.

Essential Functions:

• Monitor manufacturing activities and ensure manufacturing processes are being followed and that all quality requirements are being met or exceeded.
• Review and dispose of all scrap produced in the department which includes effective root cause and corrective action analysis.
• Direct departmental activities providing assurance of safety, health, and compliance with environmental rules and regulations.
• Directly supervises the employees in their department. Carries out supervisory responsibilities in accordance with the organization’s policies and applicable laws.
• Engage in efforts to continuously improve the processes on the shop floor.
• Ensure that HR policies, procedures, and regulations are followed and documented.
• Maintain a thorough knowledge of all processes and equipment.
• Meet departmental metrics.
• Perform other related duties or responsibilities as required.

Required Qualifications & Experience:

• Must be a “U.S. Person” as defined by the U.S. Government and able to work without restrictions with ITAR related data.
• High School Diploma or GED required.
• 5+ years experience in a manufacturing environment; aerospace preferred.
• 3+ years of supervision experience.

Desired Knowledge, Skills, and Abilities:

• Bachelor’s or Associate’s degree in Engineering or other related field preferred.
• Must be able to read, write, understand, and speak English at a functional level.
• Ability to interpret and edit FANUC G-code programming.
• Proficient in FANUC, Okuma controls.
• Ability to communicate professionally and effectively with all levels of the organization.
• Ability to interpret policies, procedures, and standard business practices.
• Ability to read and interpret blueprints and engineering work instructions.
• Ability to initiate, record, recommend, verify, and implement corrective actions or solutions to problems relating to product, process or quality system.
• Fluent in Microsoft Office applications.
• Must have strong attention to detail.
• Ability to travel domestically. – 5%

Reasonable accommodation may be made to enable individuals with disabilities to perform.

Technical Facilities Manager | $110k - $130k | Healthcare, Connecticut

Your new company

Hays have partnered with a leading energy infrastructure service firm, who are looking to hire an experienced Facilities Management leader to oversee the operation and optimization of a Central Energy Plant (CEP). The role will work with key stakeholders in guiding best-in-class energy strategies for thermal producing assets in a healthcare facility.

Your new role

As the Technical Facilities Manager, you will be responsible for analyzing daily energy usage and identifying opportunities to enhance efficiency and improve operational practices. Working daily with internal teams and 3rd party vendors, you will provide mentorship on energy management and support the development of long‑term strategies to maximize performance. The role will take full responsibility for the operation and maintenance of the CEP, ensuring all systems run safely, reliably, and efficiently. This includes managing maintenance reserve accounts, overseeing operator training, maintaining an up‑to‑date plant operating manual, and coordinating troubleshooting activities with both on‑site staff and remote support teams. You will also collaborate closely with engineering, procurement, and construction teams to align project activities with ongoing operations.

What you'll need to succeed

• PE preferred or FE and working towards obtaining PE.
• 4+ years’ experience in any of the following: management experience in a central plant or facility, mechanical construction with a large mechanical subcontractor or MEP design consultant managing multiple sites with large teams.
• 4 year Mechanical Engineering degree (plus, not required).
• Well versed in building codes and standards.
• Excellent communication and organizational skills.
• Effective verbal and written communication skills.
• Detail-oriented with the ability to multitask projects in a fast-paced environment.

What you'll get in return

You will have the opportunity to work with one of the nation’s largest energy‑as‑a‑service providers, with more than a century of industry expertise. With established accounts and long‑term contracts across some of the country’s largest healthcare and education systems, you will play a key role alongside experienced leaders in a mission‑critical environment.

Insurance Sales Specialist

Take Control of Your Career Today

We are looking for motivated, disciplined and goal-driven individuals to join our high-performing insurance sales team! Whether you’re an experienced sales professional or looking for a rewarding career change, we provide everything you need to succeed—leads, training, mentorship, and an unmatched commission structure.

Why Join Us?

No Cold Calling – Leverage our unique platform that targets qualified candidates seeking our diverse life insurance products, allowing you to focus more on client interactions and less on lead hunting.

Flexible Schedule – Work remotely, in person, or a combination of both. You decide!

Unlimited Earning Potential – Competitive compensation with the most attractive commission and bonus structure in the industry and residual income on renewals.

Comprehensive Training – We provide the tools, scripts, and mentorship to help you close deals quickly as well as a supportive team environment with access to seasoned mentors.

Career Growth – Advancement opportunities based on performance, not tenure.

What You’ll Do:

Get Licensed!- Must have or be willing to obtain a life insurance license (we provide guidance and support to help you get licensed).

Meet with Clients – Perform comprehensive needs assessments to understand clients' financial goals and insurance needs, presenting and explaining life insurance options to help clients make informed decisions.

Present Tailored Solutions – Deliver captivating sales presentations to individuals and groups, showcasing the benefits and features of our life insurance products.

Close Sales & Earn Big – Guide clients through the application process and celebrate each win!

Build Long-Term Relationships – Cultivate and maintain long-term relationships with clients, offering continuous support and service. Conduct regular follow-ups to ensure customer satisfaction and policy retention.

Stay Informed – Stay up to date on industry trends, competitive products, and market conditions. Utilize this knowledge to position our life insurance products effectively and provide clients with pertinent information.

What You Need to Succeed:

Strong communication and persuasive sales skills

Self-motivated and goal-oriented mindset

Ability to work independently and manage your own schedule

No experience required – we’ll help you get licensed if you’re not already!

Valid driver’s license & reliable transportation (for in-person meetings)

Compensation & Perks:

High commission structure with monthly bonuses

Residual income paid annually on policy renewals

Comprehensive training and continuous professional development.

Fast-track promotion opportunities

Position Description

Immediately hiring a Permanent Full-Time Experienced Mid-Level Diesel Technician to support our Truck Fleet at Ryder in Hartford, Connecticut

Hear it from a Ryder Technician Employee Here:

• 
  
• Hourly Pay: $25.25 per hour
  
  
• Certification Bonus of $100 for each New ASE Certification Obtained up to $700
  
  
• Quarterly Bonus: Ryder Pays you up to $500 Every Quarter - Four Times Per Year
  
  
• Sign On Bonus: Ryder Pays You $1250 at 30 days and $1250 at 90 days
  
  
• Tool Box/Tool Allowance
  
  
• Schedule: Monday–Friday Weekends OFF
  
  
• Hours: Second Shift 3:00 pm – 11:30 pm
  
  

We want the right Maintenance Repair Mechanic to join us at Ryder to work on Heavy Duty Vehicles.

Apply Here with Ryder Today

Spots are filling fast — click apply now to secure your spot.

Questions? Call Kim or text “Hartford T2” to 9 to speak with your recruiter today.

We have all the benefits other shops do without the wait!

• 
  
• Annual Merit Pay Increases Every Year
  
  
• On the Job Paid Training
  
  
• Medical, Dental, Vision, 401 K etc. Start at 30 Days
  
  
• We love our Ryder babies and offer 12 weeks of PAID Maternity Leave
  
  
• Paid Time Off Starts Accruing at DAY ONE with 80 hours per year
  
  
• Additional Day Off for U.S. Military Veterans
  
  
• 401 K offers a company match
  
  
• HIGH VALUED Stock at 15 % Employee Discount
  
  
• PPE, UNIFORMS, AND BOOT ALLOWANCE PROVIDED
  
  
• Ryder Top Technician Recognition Programs rewards 12 Top Techs each year with Cash Prizes from $250 to $50,000!
  
  
• Technician Tuition Repayment Program up to $5,000! Ask your recruiter about it today!
  
  

Stop In and Meet the Team at the Ryder Shop: 185 West Service Rd. Hartford, CT 06120

Click Here to See All Ryder Careers:

We want YOU to join our family made up of Proud Women and Men in Logistics who work alongside Military Reserve and Veterans we hire everyday

Refer anyone and get rewarded with UNLIMITED bonuses up $1,500 for every Ryder hired Diesel Mechanic, Service Employee, Driver, Warehouse Associate and more!

EEO/AA/Female/Minority/Disabled/Veteran

Requirements

• 
  
• High school diploma or equivalent preferred
  
  
• Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred
  
  
• Basic tools, required
  
  
• Demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:
  
  
• Routine preventative maintenance, which should include oil changes, brake and tire work, required
  
  
• Two (2) years or more of a combination of classroom training and work experience in required experience, preferred
  
  
• Valid Commercial Driver License (CDL) CLASS A,preferred
  
  
• This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:
  
  
• Must be able to obtain CDL within 6 months after hire
  
  
• Pass a Ryder Drug Test
  
  
• Pass a DOT physical
  
  
• Pass a Ryder road test
  
  
• Pass a Ryder Background and Motor vehicle check including drug and alcohol verification from previous employers for the last 3 years
  
  

Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned.

Responsibilities

• 
  
• Performs vehicle maintenance and repair duties
  
  
• Performs standard vehicle maintenance
  
  
• Performs standard component inspections and repairs
  
  
• Performs preventive maintenance
  
  
• Diagnoses standard mechanical and electronic problems, utilizing diagnostic computer when applicable
  
  
• Identifies root cause of basic failures/conditions and perform repairs as required
  
  
• Replaces defective components as instructed
  
  
• Performs facility maintenance duties
  
  
• Interacts with customers/drivers to properly determine nature of complaint once assigned a task
  
  
• Utilizes key functions of Shop Management System and electronic documentation available
  
  
• Works in accordance with all federal/ provincial and corporate compliance guidelines (i.e., safety, DOT, MOT)
  
  
• Performs other support duties as required to support operations. These could include but are not limited to Service Island support
  
  

Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability.

Posted Date 1 week ago (3/12/2026 3:35 PM)

Requisition ID 2

Location (Posting Location) : State/Province CT

Location (Posting Location) : City HARTFORD

Location (Posting Location) : Postal Code 06106

Category Technicians/Service Employees4

Employment Type Regular-Full time

Travel Requirements 0-10%

Position Code 1000120

Min Pay USD $25.25/Hr.

Max Pay USD $25.25/Hr.