Engineering Structures Journal Jobs in Warminster Pennsylvania

Provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service to general and various specialized diagnostic and therapeutic medical equipment, as assigned by the Clinical Engineering (CE) Manager.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users, CE Managers, and Regional Director of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines)  to order parts and supplies required for emergency service or repair  of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

Minimum of an Associates of Applied Sciences Degree in related field of medical electronics, electronic technology or equivalent military or related training required.  CBET certification preferred.

Three to five years experience or equivalent, performing corrective and planned maintenance on medical devices and/or clinical support equipment. 

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and  test equipment specific to the field.  Ability to train CE associates  on use and application of select test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and  Clinical Engineering. 

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to follow complex written instructions, perform tasks and document actions taken.

 Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes. .

Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service to general and various specialized diagnostic and therapeutic medical equipment, as assigned by the Clinical Engineering (CE) Manager.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users, CE Managers, and Regional Director of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines)  to order parts and supplies required for emergency service or repair  of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

Associates of Applied Sciences degree in medical electronics, electronic technology or related field, including comparable military training or an equivalent combination of education and experience. CBET certification preferred.

Three (3) to five (5) years' experience  performing corrective and planned maintenance on medical devices and/or clinical support equipment. 

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and  test equipment specific to the field.  Ability to train CE associates  on use and application of select test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and  Clinical Engineering. 

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to follow complex written instructions, perform tasks and document actions taken.

 Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes. .

Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service to general and various specialized diagnostic and therapeutic medical equipment, as assigned by the Clinical Engineering (CE) Manager.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users, CE Managers, and Regional Director of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines)  to order parts and supplies required for emergency service or repair  of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

Minimum of an Associates of Applied Sciences Degree in related field of medical electronics, electronic technology or equivalent military or related training required.  CBET certification preferred.

Three to five years experience or equivalent, performing corrective and planned maintenance on medical devices and/or clinical support equipment. 

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and  test equipment specific to the field.  Ability to train CE associates  on use and application of select test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and  Clinical Engineering. 

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to follow complex written instructions, perform tasks and document actions taken.

 Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes. .

Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service to general and various specialized diagnostic and therapeutic medical equipment, as assigned by the Clinical Engineering (CE) Manager.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users, CE Managers, and Regional Director of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines)  to order parts and supplies required for emergency service or repair  of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

Minimum of an Associates of Applied Sciences Degree in related field of medical electronics, electronic technology or equivalent military or related training required.  CBET certification preferred.

Three to five years experience or equivalent, performing corrective and planned maintenance on medical devices and/or clinical support equipment. 

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and  test equipment specific to the field.  Ability to train CE associates  on use and application of select test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and  Clinical Engineering. 

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to follow complex written instructions, perform tasks and document actions taken.

 Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes. .

Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service to general and various specialized diagnostic and therapeutic medical equipment, as assigned by the Clinical Engineering (CE) Manager.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users, CE Managers, and Regional Director of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines)  to order parts and supplies required for emergency service or repair  of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

Associates of Applied Sciences degree in medical electronics, electronic technology or related field, including comparable military training or an equivalent combination of education and experience. CBET certification preferred.

Three (3) to five (5) years' experience  performing corrective and planned maintenance on medical devices and/or clinical support equipment. 

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and  test equipment specific to the field.  Ability to train CE associates  on use and application of select test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and  Clinical Engineering. 

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to follow complex written instructions, perform tasks and document actions taken.

 Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes. .

Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Senior FPGA Engineer

Delta Information Systems is seeking a hands-on Senior FPGA Engineer with strong RF communications and DSP experience under our GDP division to design and develop real-world aerospace telemetry hardware.

Job Overview

This role focuses on FPGA/DSP design for RF receivers, taking designs from MATLAB modeling through FPGA implementation, board bring-up, and system integration. You’ll work on mission-critical products used in flight test, missile test, range safety, and space applications.

This is a hardware focused engineering role, not a software only position. Candidates should have hands-on FPGA and board-level experience.

This is an onsite position located in Horsham, PA. Hybrid option may be considered. No employer visa sponsorship is available.

Responsibilities

• FPGA/DSP design and debug for telemetry RF receivers
• VHDL-based FPGA design, simulation, and verification
• MATLAB modeling to support DSP and system architecture
• Board-level development, PCB oversight, and lab bring-up
• Integration of embedded CPU and FPGA designs
• Cross-functional collaboration with engineering and marketing
• Documentation: requirements, test plans, design reviews
• Jira-based issue tracking and design reviews

Qualifications

• BS in Electrical Engineering
• 5+ years in DSP-based product development
• Hands-on FPGA design experience (VHDL)
• RF receiver signal processing experience
• Familiarity with modulation schemes (PCM/FM, SOQPSK)
• Familiarity with FEC techniques (LDPC, Viterbi)
• FPGA simulation + MATLAB experience
• Lab experience with test equipment
• Embedded C/C++ a plus
• U.S. Persons Only (ITAR/EAR)

This position may require exposure to information, which is subject to US export control regulations, i.e. the International Traffic in Arms Regulations (ITAR) or the Export Administration Regulations (EAR). All applicants must be “U.S. persons” within the meaning of U.S. regulations.

Compensation

• Salary Range: $135,000-$165,000 (based on experience)
• 100% PAID COVERAGE for Medical, Dental, and Vision for the Employee and Dependents
• 401(k) Employer Match
• Employee Stock Ownership Program (company funded)
• Life Insurance (company funded)
• Short-Term Disability (company funded)
• Long-Term Disability (company funded)
• 80 hours (Vacation)
• 40 hours (Sick Leave)
• 11 days (Paid Holidays
• HealthCare FSA
• Dependent Care FSA

What We Offer

• Opportunities for training, certifications, and career growth.
• A mission-driven culture where your work contributes to national security.
• Exposure to advanced technologies and programs critical to the aerospace and defense sector.

Why Join Delta

• 50+ years in aerospace telemetry
• Engineers own designs end-to-end
• Small, experienced team with minimal bureaucracy
• Hardware that ships, flies, and is used in the field

About Delta Information Systems, Inc.®

Delta Information Systems (DIS) is an industry-leading supplier of high-quality aerospace telemetry products for Flight Test, Missile Test, Range Safety, Launch Support and Satellite Command and Control applications. Their products address the complete telemetry chain from Data Acquisition, Storage, Transport and Distribution to Telemetry Processing and Display. DIS customers include all DoD entities, all Major Primes, Integrators, Gov Labs, Aircraft & Missile Manufacturers, & Launch Facilities.

In addition, Delta Information Systems (DIS) designs and develops sophisticated electronic equipment that is specifically designed to reliably operate in harsh environments. They deliver critical video communications capability for manned and unmanned Intelligence, Surveillance and Reconnaissance (ISR) programs.

Avo Photonics ( ) is a dynamic contract engineering services company that designs, develops and manufactures custom opto-electronic products for a large customer base. Members of our staff have the opportunity to design, prototype, and produce next generation products for a diverse range of markets including environmental, medical, military, industrial, aerospace, and communications.

We are seeking an experienced Manufacturing Manager who will help to further our success and reputation in the industry through world-class customer service for our weekend operations. This position will report directly to the Director of Manufacturing. The successful candidate must keep multiple records, be self-motivated, maintain a professional presence, and have the desire to take ownership.

Specifically:

• Manage production Line Managers
• Execute production build plans as defined by Director of Manufacturing; meet customer performance, quality, and delivery
• Ensure 100% accurate execution of process steps per authorized Work Instructions by properly trained personnel
• Continually monitor and optimize staffing placement, development, and needs
• Define and track training program for all production staff
• Take ownership and demonstrate excellence; production areas shall exemplify discipline, cleanliness, quality, and control
• Confirm all Quality Documents are being completed properly and in a timely fashion
• Monitor and manage yield loss scrap so that corrective actions can be implemented quickly
• Drive continuous improvement through observations shared and discussed with Director of Manufacturing and Product Engineering
• Ensure that equipment and quality issues are resolved through Engineering

Requirements:

• B.S. in Operations Management or a technical discipline
• 7 years of progressive manufacturing leadership, inclusive of supervisory roles of multi-shift operations
• Ability to plan equipment capacity, staffing, space and material flow in a high technology manufacturing environment
• Demonstrated ability to identify and develop strong Line Managers and Process Leads
• Demonstrated experience in establishing teams and personnel development planning in a manufacturing environment
• Strong attention to details
• Ability to communicate clearly and concisely

Apply: Avo Photonics offers competitive salaries and a comprehensive benefits package.

Equal Opportunity Employer: Avo Photonics is not accepting unsolicited assistance from search firms for this employment opportunity. All resumes submitted by search firms to any employee of Avo Photonics by any method without a valid written contract in place with Avo Photonics will be deemed the sole property of Avo Photonics. No fee will be paid in the event the candidate is hired by Avo Photonics as a result of the referral or through any other means.

Avo Photonics ( ) is a dynamic contract engineering services company that designs, develops and manufactures custom opto-electronic products for a large customer base. Members of our staff have the opportunity to design, prototype and produce next generation products for a diverse range of markets including environmental, medical, military, industrial, aerospace, and communications.

We seek a diligent, dedicated and meticulous person who will help to further our success and reputation in the industry through world-class customer service. The successful candidate must plan his/her own work schedule, keep multiple records, be self-motivated, maintain a professional presence, and have the desire to take ownership of projects.

Specifically:

• Design and assemble tools, fixtures, and test and assembly workstations
• Set up and bring up test and assembly stations
• Troubleshoot and resolve problems with test fixtures and stations
• Define preventive maintenance plans for test fixtures and stations
• Improve process yield and station up-time through good design and continuous improvement
• Apply 5S methods to design work areas for efficiency, product quality, and ergonomics
• Identify and eliminate safety hazards in stations, tools, and fixtures

Requirements:

• Bachelor’s degree in engineering. Mechanical engineering preferred
• 3 years experience in industry
• Demonstrated attention to detail
• Experience with 5S manufacturing methodology

Apply: Avo Photonics offers competitive salaries and a comprehensive benefits package. Qualified candidates are encouraged to apply!

Equal Opportunity Employer: Avo Photonics is not accepting unsolicited assistance from search firms for this employment opportunity. All resumes submitted by search firms to any employee of Avo Photonics by any method without a valid written contract in place with Avo Photonics will be deemed the sole property of Avo Photonics. No fee will be paid in the event the candidate is hired by Avo Photonics as a result of the referral or through any other means.

Founded and family?owned since 1896, Rhoads Industries is a total solution provider of industrial fabrication, mechanical/maintenance and maritime services. In addition to our field service and project skilled labor, Rhoads has expansive shipyard facilities and over 300,000 square feet of heavy manufacturing space located in The Navy Yard in Philadelphia. Rhoads capabilities enable our customers to achieve superior results by deploying our diverse, highly skilled workforce and fabrication capabilities across commercial, government and maritime projects, all backed by state?of?the?art resources and a 100+ year legacy of leadership.

As a member of the Rhoads team, youll join a quickly growing team of energetic, skilled tradespeople and professionals who are committed to delivering exceptional products and services to our customers across every market we serve. We are building on our success across more than a century by continuing to grow an innovative company dedicated to building exciting careers. Come join our journey, and experience what it means to be Done Right with Rhoads.

We are currently looking for a Quality Inspector to join our dynamic, fast-paced, and growing team. The Inspector is responsible for performing non-destructive testing (NDT) to ensure the integrity and quality of materials and components. This role involves utilizing various NDT methods to detect and evaluate defects or irregularities without damaging the test subjects. The Inspector will work closely with engineering, production, and quality control teams to uphold high standards of quality and safety.

We are seeking candidates who are flexible and open to working either 1st or 2nd shift, depending on team and production needs. Shift assignments will be determined in partnership with the selected candidate and business requirements.

What You Will Be Doing

Non-Destructive Testing:

• 
  
• Primarily perform Visual Testing (VT) to assess materials and components for surface defects, ensuring compliance with established standards.
  
• Support additional NDT methods such as magnetic particle testing (MT) and liquid penetrant testing (PT) when required.
  
• Prepare test specimens and equipment, following established procedures and safety protocols.
  

Inspection and Evaluation:

• 
  
• Conduct thorough inspections of materials and components to identify defects, irregularities, and compliance with specifications.
  
• Analyze and interpret test results to determine the presence, location, and severity of defects or inconsistencies.
  

Compliance and Standards:

• 
  
• Ensure that all NDT activities comply with relevant industry codes, standards (e.g., ASTM, ISO, ASME), and company procedures.
  
• Stay current with updates and advancements in NDT methods, standards, and best practices.
  

Documentation and Reporting:

• 
  
• Maintain accurate and detailed records of NDT activities, including inspection reports, test results, and defect logs.
  
• Prepare and submit comprehensive inspection reports, highlighting key findings, non-conformities, and recommendations for corrective actions.
  

Equipment Maintenance:

• 
  
• Maintain NDT equipment and tools to ensure accuracy and reliability of test results.
  
• Perform routine inspections and preventative maintenance on NDT equipment to ensure proper functioning.
  

Safety and Compliance:

• 
  
• Adhere to all safety protocols and procedures while performing NDT inspections.
  
• Ensure that all NDT activities are carried out in a safe and compliant manner, following company safety policies and industry regulations.
  

Your Background

• 
  
• US Citizenship required.
  
• Excellent visual inspection skills and attention to detail.
  
• Ability to interpret and analyze test results accurately.
  
• Proficiency in using NDT tools and equipment (primarily VT, with exposure to MPT/LPT).
  
• Knowledge of welding codes and standards (e.g., AWS, ASME).
  
• Strong communication and documentation skills.
  
• Ability to work effectively with cross-functional teams and manage multiple tasks.
  
• Proficiency in using measurement and testing equipment.
  
• Attention to detail and a commitment to maintaining high-quality standards.
  
• Ability to obtain and maintain Personnel Security Clearance.
  
• Must be able to work independently and irregular hours, as required.
  
• Ability to solve challenges independently in compliance with written and verbal guidance.
  
• Competent in using various software tools including Microsoft Word, Excel, OneNote, and PowerPoint.
  
• Education: High school diploma or equivalent; vocational training or an associates degree in NDT technology, materials science, engineering, or a related field is preferred.
  
• Certification: Certification in one or more NDT methods (e.g., Level I, II, or III from ASNT, or equivalent) is preferred but required.
  

The Work Environment at Rhoads

• 
  
• The performance of this position involves exposure to construction or industrial areas where the use of personal protective equipment such as safety glasses, hard hats and hearing protection is required.
  
• Ability to perform detailed inspections and testing, which may involve standing, walking, and using various measurement tools.
  
• The performance of this position involves exposure to construction or industrial areas where the use of personal protective equipment such as safety glasses, hard hats and hearing protection is required.
  
• Must be able to work in a variety of physical positions, including sitting, standing, walking, and driving in an automobile
  
• May require walking and standing on irregular, uneven surfaces in an industrial setting and possibly at increased heights climbing and descending ladders and ship stairways.
  

What Rhoads Can Offer You

At Rhoads Industries, our team is the foundation of our success. Along with a competitive salary, we offer a variety of additional benefits designed to support your well-being and promote a healthy work-life balance for you and your family. Benefits include:

• 
  
• Competitive health insurance packages
  
• 401k matching
  
• PTO
  

Our Location

We are based out of The Navy Yard in Philadelphia, a reimagined industrial locale with more than 150 companies, 15,000+ people, 20 acres of parks, dining options, public art, and events throughout the year. Recognized as a leading model for repurposing military and industrial assets for a diversified modern economy, The Navy Yard has been dubbed the coolest shipyard in America.

For more information about Rhoads Industries and our opportunities please visit and follow us on LinkedIn.

Rhoads Industries, Inc. is an Equal Opportunity Employer, making decisions without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, veteran status, and disability.

Avo Photonics ( ) is a dynamic contract engineering services company that designs, develops, and manufactures custom opto-electronic products for a large customer base. Members of our staff can design, prototype, and produce next generation products for a diverse range of markets including environmental, medical, automotive, military, industrial, aerospace, and communications.

We seek a diligent, dedicated and meticulous leader who will help to further our success and reputation in the industry through world-class customer service. The successful candidate must be able to lead a team, keep multiple records, be self-motivated, maintain a professional presence, and have the desire to take ownership of projects.

Responsibilities:

• Shift management of 10-20 Production Technicians and Assembly/Test Operators
• Understand area production goals and how they link to meet customer delivery requirements; execute build plans to meet shipment schedules
• Continually evaluate and identify staffing needs and excesses to meet goals while minimizing cost; assign the appropriate level of staff for each process step
• Evaluate all staff for development potential and performance management
• Ensure accurate execution of process steps per authorized work instructions by properly trained personnel; ensure all staff maintain process proficiency with documented training records
• Ensure inventory accuracy by timely and accurate recording of materials consumed, scrapped, or quarantined
• Manage yield loss scrap promptly so that corrective actions can be implemented quickly
• Ensure that equipment and quality issues are resolved timely, whether through production, engineering, or customer resources
• Ensure proper housekeeping throughout the department including all work surfaces, equipment, racks and the floor.

Requirements:

• 4 years of operations experience in a leadership role
• B.S. in Operations Management or a technical discipline is preferred
• Experience with standard spreadsheet applications is required; experience with ERP systems is preferred
• Proven ability to communicate effectively across multiple departments with all levels
• Possess a sense of urgency to resolve problems
• Demonstrated experience in training or developing personnel in an operations environment
• Outstanding verbal and written communication skills

Apply: Avo Photonics offers competitive salaries and a comprehensive benefits package. Qualified candidates are encouraged to apply.

Equal Opportunity Employer: Avo Photonics is not accepting unsolicited assistance from search firms for this employment opportunity. All resumes submitted by search firms to any employee of Avo Photonics by any method without a valid written contract in place with Avo Photonics will be deemed the sole property of Avo Photonics. No fee will be paid in the event the candidate is hired by Avo Photonics as a result of the referral or through any other means.