Engineering Structures Journal Jobs in Kent Wa Remote
437 positions found — Page 2
Numerical Control Programmer
Auburn, WA
6+ Months Contract
Primary Responsibilities
• Create, verify, and revise Machine Control Data (MCD), tooling geometry, and setup documentation for multi-axis CNC machines (primarily 5-axis).
• Interpret engineering drawings, planning documentation, and manufacturing requirements to develop robust NC programs for aluminum and hard-metal parts.
• Develop multiple setups and operations for complex part geometries, ensuring fixturing, tooling, and machine selection support producibility and tolerances.
• Produce clear setup sheets and operator instructions that enable consistent and safe machine operation.
• Use simulation/verification tools (e.g., Vericut) to validate programs and eliminate collisions or gouges prior to shop-floor execution.
• Troubleshoot and iterate programs based on first-article inspections, in-process feedback, and shop-floor testing.
• Coordinate with planning, manufacturing engineering, tooling design, and machine operators to optimize cycle times, reduce scrap, and address manufacturability concerns.
• For Level 4: Lead the design of custom fixtures and complex tooling arrangements and define machining strategies across multiple operations and machines.
• Maintain program documentation, revisions, and configuration control per company/contract requirements.
• Work under minimal direction.
Required Skills
• 7+ years of NC programming experience for production machining or equivalent combination of education and experience.
• Demonstrated experience programming 5-axis CNC machines for aerospace parts (aluminum and hard metals).
• Proficiency reading and interpreting engineering drawings, GD&T, and manufacturing documentation.
• Proficient in CATIA V5 NC programming.
• Proficient in NC simulation/verification tools such as Vericut.
• Ability to create clear setup documentation and operator instructions.
• Able to work 2nd shift schedule as specified.
• Contractor eligibility to work under the terms of the engagement.
Preferred Qualifications
• Prior experience creating custom fixtures and tooling for multi-setup machining operations
• Experience defining machining strategy and selecting appropriate machines and processes for part families.
• Familiarity with aerospace manufacturing processes, inspection practices, and first-article requirements.
• Strong problem-solving skills with a track record of reducing cycle times or improving producibility.
• Effective communicator with experience collaborating across planning, engineering, and shop-floor teams.
• Experience with additional CAM systems or post-processors commonly used in aerospace environments.
Education / Experience:
Education/experience typically acquired through advanced education (e.g. Associate) and typically 6 or more years' related work experience or an equivalent combination of education and experience (e.g. Bachelor+4 years' related work experience, 8 years' related work experience, etc.).
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.Boeing Commercial Airplanes is excited to offer opportunities for an Tube, Duct, and Reservoir Assembler to join our Fabrication team in Algona and Auburn, Washington.As an Assembler Weld & Duct, you will be at the forefront of our operations, transforming precision-engineered components into vital subassemblies for aircraft systems.
Your expertise will ensure that every part is meticulously prepared, fitted, and aligned, contributing to the seamless integration of hydraulic, fuel, and oxygen systems.
You will have the opportunity to work with cutting-edge tools and technologies, collaborating with a dedicated team to achieve exceptional results.You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.Position Responsibilities:Verify kitted parts and assemblies against Work Orders (W/O) and Bills of Material (BOM) to ensure accuracy and quality.Obtain necessary engineering drawings for assigned jobs if not included with the order.Initiate planning or engineering change requests for pre-planned jobs as required.Set up assembly tools according to instructions and ensure correct locators for model configurations.Hand fit parts using jigs and tools to ensure proper alignment and fit.Prepare detail parts by trimming, sanding, and deburring as necessary to meet specifications.Deliver completed details to the appropriate work area for further processing.Select and utilize appropriate drills, reamers, and countersinking tools for hole preparation.Drill and ream holes in parts and assemblies according to drawing specifications.Apply sealants, primers, and adhesives as required by work orders and specifications.Handle and dispose of hazardous materials safely, following approved procedures.Obtain the correct type and size of fasteners from the roto-bin per specifications.Report job handicaps, such as errors in sequencing, parts, materials, and fabrication procedures.Measure and cut tubing to close tolerances, and swage tubing as necessary.Conduct in-process checks to ensure compliance with quality requirements and specifications and seek assistance from the team leader when needed.Physical Demands and Potential Hazards:Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.Work in environments that may involve contact with metals, solvents, and coolants.Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.Adapt to varying noise levels and atmospheric conditions.Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.
§ 120.15 is required.
“US Person” includes US Citizen, lawful permanent resident, refugee, or asyleeCurrent Boeing employees working in Puget Sound and Portland must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool.
Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.Basic Qualifications:1+ years of experience working with powered hand tools1+ years of experience working with precision measuring toolsComputer proficiency including Microsoft Office Suite1+ years of experience using basic math (e.g.
addition, subtraction, multiplication and division)1+ years of experience working with detailed work instructions or reading and interpreting blueprints and drawingsAbility to lift, push and pull up to 35 pounds frequently within an 8 hour shiftTypical Education & Experience:High school graduate or GED preferred.Relocation:Relocation assistance is not a negotiable benefit for this position.
Candidates must live in the immediate area or relocate at their own expense.Drug Free Workplace:Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Union Representation Statement:This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.Shift Work Statement:This role is primarily 2nd shift; however, there may be additional shift requirements to support program objectives.Total Rewards & Pay Transparency:At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay: $24.32/hour, with potential to earn up to $53.30/hour in accordance with the terms of the relevant collective bargaining agreement.Applications for this position will be accepted until Apr.
30, 2026Language Requirements English PreferredRelocation Relocation assistance is not a negotiable benefit for this position.Visa Sponsorship Employer will not sponsor applicants for employment visa status.Shift This position is for variable shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.
Boeing Commercial Air planes is excited to offer opportunities for a Decorative Interior Repairperson to join our Joint and Installation team in Renton or Everett , Washington.
As a Decorative Interior Repairperson, you will be essential in ensuring that our aircraft interiors meet the highest standards of quality and safety.
Your expertise will be vital in identifying and documenting any visible defects during thorough inspections, allowing you to execute precise repairs on interior trim and furnishings.
By utilizing detailed specifications and prints, you will ensure that all materials used are appropriate and effective for the aircraft .
Additionally, you will be required to pass an eye examination for color perception to ensure optimal performance in your role.
Your meticulous approach will involve disassembling components, cleaning surfaces, and applying various finishes to achieve a flawless appearance.
Collaboration with engineering and planning teams will be key as you address any challenges that arise, ensuring that all repairs conform to established procedures and specifications.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities : Obtain work assignments from the team leader or review relevant paperwork to determine tasks.
Perform walk-through inspections of aircraft interiors to identify and document visible defects for repair.
Make repairs to interior trim and furnishings using materials such as plastics, vinyl, and metal, and remove stains or scratches.
Use prints, specifications, and documents necessary to accomplish work effectively.
Obtain and verify kitted repair supplies, ensuring color combinations are suitable for the aircraft .
If supplies are not pre-picked, gather specified materials from storage areas as outlined in installation plans or non-conformance records.
D isassemble defective interior trim parts using hand tools and clean surfaces prior to applying new materials.
Apply potting compounds, primers, adhesives, and special finishes as required by specifications and work orders.
Fit and assemble detail components to repaired parts according to specifications and drawings.
Paint or touch up repair areas using appropriate tools to achieve the desired finish, including mixing and matching paint as needed.
Rework materials per engineering specifications and incorporate changes as needed, including leather repairs and touch-ups.
Remove marks and scratches from metal surfaces using appropriate tools and techniques.
Seal edges of repair areas with color-matched sealant as required .
Consult with engineering, planning, and inspection on job-related issues and contact team leaders or supervisors when assistance is needed.
Document repairs identified by other mechanics and maintain personal certifications as required .
Physical Demands and Potential Hazards : Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job dutie s.
This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.
§ 120.15 is required .
“US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool.
Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Basic Qualifications : 1 years of experience working with vinyl wallpaper, composites/non-metallic materials .
Experience applying and evaluating decorative paint/ink for color match.
Ability to wear eye, hearing, foot, hand, respirator and other personal protective equipment/safety gear at all time.
Preferred Qualifications: 1 years of experience with aerospace or automotive spray painting.
Experience working with detailed work instructions or reading and interpreting blueprints and drawings.
Experience with touch-up painting.
Enrollment in a Boeing partnered manufacturing related high school, community and technical college academic program.
Typical Education & Experience: High school graduate or GED preferred.
Relocation: Relocation assistance is not a negotiable benefit for this position.
Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace : Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement : This position is for a variety of shifts Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent .
Elements of the Total Rewards package include competitive base pay and variable compensation opportunities .
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work .
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations .
Pay: $24.32 per hour with potential to earn up to $48.58 per hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Mar.
21, 2026 Language Requirements English Preferred Relocation Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship Employer will not sponsor applicants for employment visa status.
Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for a Tool & Die Maker to join our Materials Management & Tooling team in Auburn and Renton, Washingto n.
In this hands-on position, you will be responsible for a variety of tasks, from interpreting blueprints and work orders to developing effective plans for tool fabrication and repair.
Your skills will be essential in troubleshooting production challenges, operating advanced machinery, and ensuring that all tools meet stringent quality standards.
Collaborating with cross-functional teams, you will also engage with customers and suppliers to address any functional issues, all while adhering to safety protocols and continuous improvement practices.
If you are passionate about precision engineering and ready to make a significant impact in a fast-paced environment, we invite you to explore this exciting opportunity.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities: Perform all functions related to tool fabrication, rework, and repair as required.
Obtain work orders from the team leader or supervisor, determining assignments based on schedule dates and tool availability.
Read work orders and blueprints to identify required tasks, tools, and equipment.
Develop plans for the fabrication, maintenance, and repair of tools.
Initiate and coordinate engineering change requests with internal support groups when necessary.
Determine the sequence of tool fabrication work, troubleshoot issues, and develop solutions to production challenges.
Access and utilize appropriate tool drawings, models, and specifications using available computing systems.
Select and verify necessary equipment from the shop storage area, ensuring current tool certification.
Perform repairs or replacements on tools as per Standing Tool Order (STO) Production Requests, and request rework orders if necessary.
Layout holes, lines, and other tool features, and install or modify hydraulic, pneumatic, and vacuum tubes as required.
Operate various machinery, including power saws, drill presses, and CNC machines, to shape materials and prepare details.
Move materials and equipment using Powered Industrial Trucks (PIT) and overhead cranes as needed.
Maintain accurate records of orders and coordinate tooling information with other shifts and departments.
Handle hazardous materials in compliance with Boeing procedures, using appropriate personal protective equipment.
Engage in continuous improvement practices to enhance quality, safety, and efficiency in tool and die work.
Use precision measuring instruments, such as micrometers and gauges, to ensure accuracy in fabrication and repairs.
Interface with customers and suppliers to incorporate changes or resolve functional and installation issues.
Submit completed jobs to Quality Assurance and assist inspectors in performing necessary checks or measurements.
Utilize mathematics, including algebra and trigonometry, to calculate dimensions and analyze Model Based Definition (MBD) for fabrication details.
Conduct tool tryouts and make necessary adjustments to ensure production meets quality requirements and specifications.
Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.
§ 120.15 is required.
“US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).
Basic Qualifications: 5 years of experience in repairing, maintaining, construction, and/or the inspection of tools, dies, jigs, powerfeed, etc.
5 years of experience in machine shop processes, geometric dimensioning & tolerances, and machining capabilities of different types of materials.
2 years of experience using complete set of toolmaker shop equipment (milling, lathe, precision, grinding, polishing, and fitting).
Preferred Qualifications: 5 years of experience as a Tool & Die Maker.
2 years of experience with hydraulics and pneumatics.
Completed an approved Mold Maker or Tool and Die Maker state apprentice ship program and/or certified by the U.S.
Ability to perform machining operations with a specified degree of accuracy and within a timely manner, maintain close and exacting tolerances and finish requirements ensuring highest quality workmanship on all tools, gages, and fixtures with minimal scrap.
Capable of creating a repeatable setup and working to tolerances of /-.0002" in controlled environment.
Possesses 4 and 5 axis CNC skills for mill or lathe, and extensive knowledge of detail cutting tool geometry for different cutting tool types and materials.
Ability to reverse engineer and manufacture mold components within time limitations Ability to read and write G and M code with CAM programming experience.
Conflict of Interest: Successful candidates for this position must successfully complete the Company’s Conflict of Interest (COI) assessment process.
Typical Education & Experience: High school graduate or GED preferred.
Relocation: This position offers relocation based on candidate eligibility.
Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement : This position is for a variety of shifts Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.
Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay: $40.00/hour, with potential to earn up to $62.45/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Jul.
31, 2026 Language Requirements English Preferred Relocation This position offers relocation based on candidate eligibility.
Visa Sponsorship Employer will not sponsor applicants for employment visa status.
Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for an Inspector Integral Fuel Cells to join our Quality team in Everett and Renton, Washington.
As an Inspector for Integral Fuel Cells, you will be crucial in maintaining the integrity and safety of our aircraft operations.
This position requires working in confined spaces within the wing fuel cells, where employees must crawl through an opening of 9.5” x 17.7" to access the fuel cell.
Your expertise will be vital in inspecting the cleaning, sealing, and coating processes, as well as conducting thorough leak checks to identify and resolve any issues.
Collaborating closely with Engineering, Quality, and Manufacturing teams, you will implement improvements in build processes and drive initiatives for defect reduction.
Certification for visual acuity and color perception may also be required.
Your ability to use precision measuring instruments and interpret technical documentation will ensure that all components meet stringent specifications, allowing you to make a significant impact on our operations.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities: Inspect preparatory cleaning, application of sealant, protective coatings, and leak detection coatings of integral fuel cells.
Perform and witness leak checks, determining the source of leaks and evaluating the extent of repairs required.
Inspect final assemblies, subassemblies, and installations of parts and systems for workmanship, fit, alignment, and conformance with applicable drawings and specifications.
Collaborate with Engineering, Quality, and Manufacturing to evaluate and coordinate improvements in build processes and defect reduction initiatives.
Initiate and document any nonconforming materials or assemblies according to specifications and procedures.
Conduct audits and surveillance of manufacturing and quality assurance processes to ensure compliance.
Use precision measuring instruments and shop mathematics to verify that all parts and assemblies meet quality requirements.
Review manufacturing plans and other documentation for completeness and compliance, identifying any discrepancies.
Perform in-process inspections, including checks for torque, sealant applications, and electrical bonding.
Document any discrepancies and report them to the appropriate personnel for resolution.
Verify that parts and assemblies have been properly cleaned and that sealants, primers, and finishes are applied per specifications.
Witness and document functional tests of aircraft components and systems to detect leaks.
Perform shakedown inspections on completed assemblies prior to customer acceptance, documenting any discrepancies.
Maintain personal and tool certifications, ensuring compliance with operational standards.
Assist and train other employees on inspection methods and procedures, providing guidance as needed.
Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs.
to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.
§ 120.62 is required.
“US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool.
Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Basic Qualifications: 2 years of experience as a Quality Inspector or in a related inspection role within a similar industry , such as, but not limited to, Aerospace and Manufacturing.
Ability to work in confined spaces (work within or pass through).
Entry diameter 9.5”X17.7”.
Ability to complete Fall Protection Training.
Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.
Ability to use a respirator or have been respirator certified.
Proficiency in reading, writing, and speaking English.
Preferred Qualifications: Experience working with precision measuring tools.
Experience sealing Conflict of Interest: Successful candidates for this position must successfully complete the Company’s Conflict of Interest (COI) assessment process.
Typical Education & Experience: High school graduate or GED preferred.
Relocation: Relocation assistance is not a negotiable benefit for this position.
Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement: This position is for a variety of shifts.
Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.
Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay: $27.32 /hour, with potential to earn up to $57.88 /hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Aug.
31, 2026 Language Requirements English Preferred Relocation Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship Employer will not sponsor applicants for employment visa status.
Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
*Securian Financial the internal position title is Engineering Sr Analyst or Engineering Consultant. Title and salary will be determined based on applied skills.*
Position Summary:
Join theEnterprise Partner Solutions (EPS)team as aLicensing and Compensation Engineer, where you'll drive innovation in partner experience using cutting-edge SAP technologies. This team envisions a future where every financial producer is empowered from day one through intuitive, reliable, and scalable technology. Our engineering team is committed to transforming the producer experience by delivering back-end systems that simplify onboarding, ensure compliance in licensing, and guarantee timely and accurate compensation. We strive to be the trusted backbone of producer operations, enabling our company to grow with confidence and integrity. If you're passionate about engineering solutions that make a measurable impact, this is your opportunity to shape the future of partner engagement at scale.
Responsibilities include but not limited to:
Support and maintain SAP technologies related to partner compensation and licensing, including APM (ICM), ALM, OK2, and Advanced Workflow.
Perform analysis, design, development, and integration on medium to high level complexity assignments.
Develop and support automation capabilities through webservices and APIs.
Troubleshoot and resolve incidents across the licensing and compensation platform, including integrations with internal and external systems.
Collaborate with product analysts, quality engineers, and business stakeholders to deliver enhancements and ensure platform stability.
Analyze job failures, support tickets, and backlog stories to identify trends and drive continuous improvement.
Participate in Agile ceremonies and contribute to sprint planning, story refinement, and retrospectives.
Document technical processes and contribute to knowledge sharing across the EPS team.
Qualifications:
Bachelor's degree in Computer Science, Information Systems, or related field, or equivalent experience.
3+ years of experience supporting SAP technologies, preferably in compensation or licensing domains.
Familiarity with SAP ICM/APM and ALM modules.
Strong problem-solving skills and ability to manage multiple priorities.
Excellent communication skills and ability to work cross-functionally.
Experience with Agile methodologies and DevOps practices is a plus.
Preferred Qualifications:
SAP Certification in relevant Modules
Development Languages: Java, Groovy, SQL, Git, IntelliJ, webservices
Understanding of compensation payment structures for agents and familiarity with licensing and regulatory compliance frameworks governing producer eligibility to sell products.
Ability to work independently and as part of a collaborative team.
Commitment to continuous learning and process improvement.
#LI-hybrid **This position will be in a hybrid working arrangement.**
Securian Financial believes in hybrid work as an integral part of our culture. Associates get the benefit of working both virtually and in our offices. If you're in a commutable distance (90 minutes) you'll join us 3 days each week in our offices to collaborate and build relationships. Our policy allows flexibility for the reality of business and personal schedules.
The estimated base pay range for this job is:
$72,000.00 - $134,000.00Pay may vary depending on job-related factors and individual experience, skills, knowledge, etc. More information on base pay and incentive pay (if applicable) can be discussed with a member of the Securian Financial Talent Acquisition team.
Be you. With us. At Securian Financial, we understand that attracting top talent means offering more than just a job - it means providing a rewarding and fulfilling career. As a valued member of our high-performing team, we want you to connect with your work, your relationships and your community. Enjoy our comprehensive range of benefits designed to enhance your professional growth, well-being and work-life balance, including the advantages listed here:
Paid time off:
We want you to take time off for what matters most to you. Our PTO program provides flexibility for associates to take meaningful time away from work to relax, recharge and spend time doing what's important to them. And Securian Financial rewards associates for their service by providing additional PTO the longer you stay at Securian.
Leave programs: Securian's flexible leave programs allow time off from work for parental leave, caregiver leave for family members, bereavement and military leave.
Holidays: Securian provides nine company paid holidays.
Company-funded pension plan and a 401(k) retirement plan: Share in the success of our company. Securian's 401(k) company contribution is tied to our performance up to 10 percent of eligible earnings, with a target of 5 percent. The amount is based on company results compared to goals related to earnings, sales and service.
Health insurance: From the first day of employment, associates and their eligible family members - including spouses, domestic partners and children - are eligible for medical, dental and vision coverage.
Volunteer time: We know the importance of community. Through company-sponsored events, volunteer paid time off, a dollar-for-dollar matching gift program and more, we encourage you to support organizations important to you.
Associate Resource Groups: Build connections, be yourself and develop meaningful relationships at work through associate-led ARGs. Dedicated groups focus on a variety of interests and affinities, including:
Mental Wellness and Disability
Pride at Securian Financial
Securian Young Professionals Network
Securian Multicultural Network
Securian Women and Allies Network
Servicemember Associate Resource Group
For more information regarding Securian's benefits, please review our Benefits page.
This information is not intended to explain all the provisions of coverage available under these plans. In all cases, the plan document dictates coverage and provisions.
Securian Financial Group, Inc. does not discriminate based on race, color, religion, national origin, sex, gender, gender identity, sexual orientation, age, marital or familial status, pregnancy, disability, genetic information, political affiliation, veteran status, status in regard to public assistance or any other protected status. If you are a job seeker with a disability and require an accommodation to apply for one of our jobs, please contact us by email at , by telephone (voice), or 711 (Relay/TTY).
To view our privacy statement click here
To view our legal statement click here
Remote working/work at home options are available for this role.
Intern - Manuscript Editing
Chicago (Hybrid)
The Journal of the American Medical Association (JAMA), published continuously since 1883, is an international peer-reviewed general medical journal. JAMA is a member of the JAMA Network family of journals, which includes 11 specialty journals and JAMA Network Open. The JAMA Network provides access to the research, reviews, and opinions shaping the future of medicine.
At AMA, our mission to improve the health of the nation starts with our people. We foster an inclusive, people-first culture where every employee is empowered to perform at their best. Together, we advance meaningful change in health care and the communities we serve.
We encourage and support professional development for our employees, and we are dedicated to social responsibility. We invite you to learn more about us and we look forward to getting to know you.
Join the JAMA team as an Intern. This is a hybrid position reporting into our Chicago, IL office, requiring 1 day a week in the office.
RESPONSIBILITIES:
- Preference is for an individual who is underrepresented in the medical writing/editing community (see American Medical Writers Association 2022 DEI survey).
- This person would train with senior manuscript editors, working with the AMA Manual of Style, reading sections and completing quizzes on style topics.
- They would observe and participate in the daily activities of JNO and specialty journal manuscript editors to get a sense of what the job is like.
- They would meet with Graphics, Production, Proofreading, and other teams with whom manuscript editors collaborate.
- Under the supervision of the Managing Editor and Assistant Deputy Managing Editor, they would edit commentaries with the eventual goal of editing a Research Letter.
May include other responsibilities as assigned
REQUIREMENTS:
- The intern should be a 3rd or 4th year student at 4-year college, majoring in English, journalism, or life sciences who is interested in pursuing a career in medical editing.
This role is a non-exempt position and the hourly rate for this position is $20. This is the highest rate we believe we would pay for this role at the time of this posting. An employee's pay within the salary range will be determined by a variety of factors including but not limited to business consideration, geographical location, as well as candidate qualifications, such as skills, education, and experience. Employees are also eligible to participate in an incentive plan. To learn more about the American Medical Association's benefits offerings, please click here.
The American Medical Association is located at 330 N. Wabash Avenue, Chicago, IL 60611 and is convenient to all public transportation in Chicago.
We are an equal opportunity employer, committed to diversity in our workforce. All qualified applicants will receive consideration for employment. As an EOE/AA employer, the American Medical Association will not discriminate in its employment practices due to an applicant's race, color, religion, sex, age, national origin, sexual orientation, gender identity and veteran or disability status.
THE AMA IS COMMITTED TO IMPROVING THE HEALTH OF THE NATION
Apply NowShare Save JobRemote working/work at home options are available for this role.
LHH is seeking a Senior Databricks AI/ML Engineer to join our client's team in a fully remote role based in Seattle, WA. Candidates must live in one of the following states, and be prepared to pass a background check/identity verification process: WA, OR, ID, OH, SC, NC, TX, or FL
LHH has a dynamic and challenging opportunity for a Senior Databricks AI/ML Engineer to join our client's engineering team. This role focuses on building and deploying scalable AI/ML solutions across key areas of the insurance functions, including underwriting, claims, pricing, customer engagement, and fraud detection, with a strong emphasis on Databricks architecture and ecosystem integration. The engineer will collaborate closely with data scientists, actuaries, product owners, and engineers to operationalize models, transforming them into robust, production-grade systems seamlessly integrated into business workflows and enterprise platforms.
Salary & Benefits:
- $150k to $185k annually (depending on location & experience)
- Medical, dental, and vision insurance
- 401(k) plan with employer match
- Vacation time accrues at a rate of 10 days annually, with increases based on a tenure schedule, up to a maximum of 25 days per year.
- PTO included Four (4) personal days are granted immediately upon hire.
- Paid holidays are provided for the eight (8) holidays observed in this role throughout the calendar year.
- Up to ten (10) days of sick leave are granted immediately upon hire (pro-rated based on hire date and full-time/part-time status).
- Additional paid time off is available for bereavement, jury duty, and employee volunteer activities in the community.
- Life and disability insurance
Minimum Qualifications:
- Bachelor's degree in Computer Science, AI/ML, Data Science/Engineering, or related field (or equivalent experience).
- 6+ years experience in ETL pipelines, SQL Server, and production data workflows.
- 3+ years enterprise experience with Azure & Databricks AI/ML, including data analysis and visual analytics.
- 3+ years applying ML algorithms and transforming data science prototypes into production.
- 5+ years experience with CI/CD workflows for ML models and related code.
- Strong SQL, real-time and batch data pipeline development, and unsupervised learning techniques.
- Familiarity with agile methodologies (e.g., Scrum).
Responsibilities:
- Conduct customer workshops to gather requirements and design analytics architectures using Azure and Databricks AI/ML.
- Serve as Databricks Architect, managing workspace design, deployment, and governance across environments.
- Define and implement Databricks Lakehouse architecture and governance best practices.
- Integrate Databricks with Azure services and lead implementation of Databricks SQL, Delta Live Tables, and MLflow.
- Develop and maintain automated MLOps workflows for model deployment, monitoring, and lifecycle management.
- Set up and configure Azure and Databricks infrastructure for AI/ML workloads.
- Review ML model code and analytics scripts for quality and performance.
- Design and build data pipelines and cloud services for monitoring, analysis, and reporting.
- Develop robust ETL workflows using Databricks, Spark, and SQL Server for structured and unstructured data.
- Provide production support and performance tuning for data engineering workflows.
- Optimize complex SQL queries and stored procedures for data processing and business logic.
- Collaborate with cross-functional teams to ensure data quality and support business decision-making.
- Scale and deploy machine learning models to handle large-scale data.
- Feed raw data into models and build deployment pipelines for new models.
- Implement logging, observability, and performance monitoring for AI/ML systems.
- Conduct architecture reviews and performance testing.
- Perform other duties as assigned.
Preferred Qualifications:
- Master's degree in a related field.
- Experience in the insurance industry (Auto, Home, Umbrella) and related AI/ML applications.
- Proficiency with tools/platforms: Azure ML, Databricks, Microsoft Fabric, Synapse, Power BI, Snowflake, and APIs like Azure OpenAI and Cognitive Services.
- Knowledge of streaming frameworks: Apache Kafka, Azure Event Hubs, Delta Live Tables.
- Strong math, problem-solving, and rapid learning skills.
- Excellent communication, organization, and independent work capabilities.
- Service-oriented mindset with ability to handle ambiguity and build strong relationships.
Equal Opportunity Employer/Veterans/Disabled
To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable:
• The California Fair Chance Act
• Los Angeles City Fair Chance Ordinance
• Los Angeles County Fair Chance Ordinance for Employers
• San Francisco Fair Chance Ordinance
Remote working/work at home options are available for this role.
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries about this opportunity, please contact one of our Talent Specialists, Hema, at (63 or Sri Balan at (63 Title: Senior Engineer, Global Services
- Hybrid Location: Medina, NY Duration: 12 Months Hours: 9 AM
- 5 PM Flexible on availability to be on-site, with someone who can work 1-2 days per week, Open to relocation and considering senior candidates.
must have the ability to travel Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered.
Description: Summary: Applies a solid understanding of engineering and problem-solving theories/practices toward the development of new or enhanced products or processes.
Creates service deliverables and infrastructure required to support initial product launch and lifecycle management.
Capable of designing machine tooling, jigs, fixtures, gauges and equipment used in the servicing process.
Capable of checking designs and drawings against general standards, design requirements, geometric tolerances, drafting practices and the manufacturing process involved.
The work of the individual should be highly creative, of high quality and offer wide latitude for independent judgment and perception with a minimal amount of supervision.
Need not have any tools/ software experience, CAD would be a plus.
Medical background will be a plus any regulatory background will be good.
Someone who was worked with Engineers, multitasking will be a great fit.
Ambiguity, adapt, multi-task and works with lead engineer in projects.
Support the team of Product core and represent service operations and supply chain.
Will be in charge of Service change implementation.
Focuses on design changes, process changes.
Collaborates with Service Process, Engineers, Technicians, impact of changes.
Oversees Document Revision, Handle Change control, mentored and directed by team to tackle multiple product and project Essential Duties and Responsibilities: 1.
Creates new product development and lifecycle management service deliverables throughout the product lifecycle for medical device products involving hardware.
2.
Supports new product platform releases.
Develops and implements service training, test equipment, tools, spare parts, and service manuals / instructions.
3.
Evaluates / makes recommendations on product releases related to design for serviceability.
Creates (or modifies existing) servicing processes and manuals to support repair or refurbishment of fielded product at multiple global sites or in the field.
4.
Works closely with design team to select, develop, and implement technologies across all medical device development programs.
5.
Analyzes key servicing metrics to identify and implement opportunities for improvement in service process quality, cost, or product reliability.
6.
Coordinates information flow between corporate and local/regional teams.
7.
Owns Corrective and Preventive Actions related to the product(s) core team(s) supported, using sound root cause analysis.
8.
May represent Technical Services on new product development and/or lifecycle management core teams.
9.
May independently plan, schedule and lead cross-functional teams in detailed phases of the engineering work in a project.
10.
May approve the work of lower level engineers; may supervise other engineers or technicians Minimum Qualifications: 1.
Must be well versed in core engineering disciplines (e.g.
mechanical, electrical, software, systems engineering).
2.
Highly motivated self-starter who is able to work with minimal supervision.
3.
Must have good interpersonal and oral/written communication skills, good time management, and be capable of analyzing and solving technical problems through innovative thought and application of sound engineering principles and root cause analysis.
4.
Experience with change control methodologies and configuration management principles is a plus.
5.
Experience with test engineering and/or reliability engineering principles is a plus.
6.
Ability to exercise independent judgment and draw conclusions based on available information.
7.
Good understanding of GMP and quality system requirements.
Education and/or Experience: Bachelor's degree in a core engineering discipline (mechanical, electrical, software, systems, or mfg/process engineering) plus 3-5 years of experience.
Medical device experience or other regulated industry experience preferred.
Experience in the use of Lean Six Sigma tools highly desirable.
About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
GMP, Medical Device, Lean Six Sigma
Remote working/work at home options are available for this role.
Digital Content Specialist II (Hybrid)
Chicago, IL
The American Medical Association (AMA) is the nation's largest professional Association of physicians and a non-profit organization. We are a unifying voice and powerful ally for America's physicians, the patients they care for, and the promise of a healthier nation. To be part of the AMA is to be part of our Mission to promote the art and science of medicine and the betterment of public health.
At AMA, our mission to improve the health of the nation starts with our people. We foster an inclusive, people-first culture where every employee is empowered to perform at their best. Together, we advance meaningful change in health care and the communities we serve.
We encourage and support professional development for our employees, and we are dedicated to social responsibility. We invite you to learn more about us and we look forward to getting to know you.
We have an opportunity at our corporate offices in Chicago for a Digital Content Specialist II on our Digital Marketing team. This is a hybrid position reporting into our Chicago, IL office, requiring 3 days a week in the office.
As a Digital Content Specialist II, you will support UX copywriting and content
across AMA's digital platforms, with a primary focus on FREIDA, a platform that
helps medical students search for and evaluate residency programs. The role contributes
to the creation of specialty-specific informational content, user-facing copy,
and messaging that helps guide medical students, residents, and physicians
through critical career decisions. Working under established UX and content
standards, this role applies UX writing best practices to improve clarity,
engagement, and usability. The position works closely with product, UX, and
marketing teams to ensure content is consistent, effective, and aligned with
the overall member experience.
RESPONSIBILITIES:
Writing and Content Development
- Write comprehensive Q&A content for individual medical specialties within the FREIDA Specialty Guide
- Develop and maintain informational content across FREIDA resources, including the Residency Guide and student-facing guidance materials
- Develop copy for the Program Director Portal, including guidance, instructions, and resource content
- Create push notifications, alert banners, and promotional messaging to support engagement and highlight key deadlines and seasonal activities
- Collaborate with medical education stakeholders to ensure content accuracy and clinical appropriateness
FREIDA Content
- Create clear, concise, and user-centered copy for FREIDA and AMA digital properties that support the FREIDA experience, including AMAone and related join/renew and sign-in flows
- Write and optimize UX copy for onboarding sequences, navigation, error states, and transactional touchpoints
- Work on landing page and member-facing content that supports usability and conversion goals
- Collaborate with UX designers to integrate copy early in the design process and support effective content-design collaboration
- Conduct content audits and contribute recommendations to improve clarity and usability
User Insight and Industry Awareness
- Develop an understanding of medical student, resident, and physician behaviors to inform content strategy and UX copy decisions
- Apply user insight and evolving UX and healthcare education trends to support product, design, and marketing initiatives
- Refine content based on user feedback, observed behavior, and performance data
May include other responsibilities as assigned
REQUIREMENTS:
- Bachelor's degree in English, Communications, Journalism, Marketing, or a related field required
- Ability to translate complex or regulated information into clear, user-centered language
- Experience collaborating with product, design, and marketing teams through content contributions
- Experience supporting content standards, including voice, tone, and style guidelines
- Comfort presenting recommendations and incorporating stakeholder feedback
- Hands-on experience with enterprise CMS platforms, preferably Drupal, and collaboration tools including JIRA, Confluence, Asana and Figma
- Working knowledge of Google Analytics and Power BI to inform content improvements
The American Medical Association is located at 330 N. Wabash Avenue, Chicago, IL 60611 and is convenient to all public transportation in Chicago.
This role is an exempt position, and the salary range for this position is $74,160-$98,318. This is the lowest to highest salary we believe we would pay for this role at the time of this posting. An employee's pay within the salary range will be determined by a variety of factors including but not limited to business consideration and geographical location, as well as candidate qualifications, such as skills, education, and experience. Employees are also eligible to participate in an incentive plan. To learn more about the American Medical Association's benefits offerings, please click here.
We are an equal opportunity employer, committed to diversity in our workforce. All qualified applicants will receive consideration for employment. As an EOE/AA employer, the American Medical Association will not discriminate in its employment practices due to an applicant's race, color, religion, sex, age, national origin, sexual orientation, gender identity and veteran or disability status.
THE AMA IS COMMITTED TO IMPROVING THE HEALTH OF THE NATION
Apply NowShare Save JobRemote working/work at home options are available for this role.
