Engineering Structures Journal Jobs in Hartford Remote
461 positions found — Page 5
Provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service to general and various specialized diagnostic and therapeutic medical equipment, as assigned by the Clinical Engineering (CE) Manager.
ESSENTIAL FUNCTIONS
Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.
Performs PM procedures on multiple types of general and specialized clinical equipment.
Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.
Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.
Notifies equipment users, CE Managers, and Regional Director of repair status and delays as necessary.
Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.
Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.
Completes corrective and planned maintenance work order documentation per policy.
Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.
Continually improves processes by seeking ways to eliminate and reduce waste.
Has authority (based on department guidelines) to order parts and supplies required for emergency service or repair of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.
Provides on-call service coverage after normal business hours on a rotating basis, as assigned.
Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.
May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.
Performs other duties as assigned or requested by the CE Manager.
Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.
MINIMUM QUALIFICATIONSAssociates of Applied Sciences degree in medical electronics, electronic technology or related field, including comparable military training or an equivalent combination of education and experience. CBET certification preferred.
Three (3) to five (5) years' experience performing corrective and planned maintenance on medical devices and/or clinical support equipment.
Must have a basic understanding of anatomy, physiology, and medical terminology.
Working knowledge and ability to use basic hand tools and test equipment specific to the field. Ability to train CE associates on use and application of select test equipment.
Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.
Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and Clinical Engineering.
Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.
Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard. Technician must be able to follow complex written instructions, perform tasks and document actions taken.
Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes. .
Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.
PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONSMust be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.
Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.
Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices.
Must be able to hear speech, distinguish sounds, and speak.
Must have near vision, far vision, depth perception, and be able to distinguish colors.
Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.
Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.
Must be able to push or pull over 100 pounds frequently (20% of the time).
Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.
Must be able to adapt to frequently changing work priorities.
Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.
Our Commitment
Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.
This role is 100% in office at our plant in East Hartford, CT.
At HORST we offer a variety of benefits including but not limited to: Competitive PTO Package Paid Company Holidays 401K Match Program Medical, Dental, Vision Benefits Tuition Reimbursement/Assistance Program Major Areas of Responsibility: Set-up and operate CNC Lathes (2-axis and multi-axis) (e.g.
Eurotech, Hardinge, etc.) Will work with blueprints, operation sheets, and other work instructions.
Working from blueprints, operation sheets, travelers or other specifications, set-ups and completes the machining operations to produce a quality part.
Checks to make sure that the material to be used meets all specifications.
Obtains bar stock or material from staging area.
Performs complex set-ups of own work or for others.
Makes all required adjustments to the machinery.
Obtains tooling, gages, inserts and all other equipment needed to complete the set-up and brings up the program.
Edits the program as necessary.
Assists other Operators or Set-up/Operators with set-up or production problems and helps to train other set-up/operators.
Ensures that all manufactured parts are in full compliance to quality standards.
Performs visual inspections (part relationship to operation sheet/blueprint configuration) on all parts produced and performs actual dimensional verification using measuring instruments as per the guidelines established by the department or the Quality Assurance Department.
Replaces all worn or damaged tooling as necessary.
Verifies and records actual part count, both prior to and upon completion of all work Performs all routine maintenance on the equipment and maintains all fluid levels.
Keeps the equipment and work area clean and organized.
Returns excess bar stock or material to the staging area.
Moves the finished work to an assigned area.
Enters all work performed into the database and documents all scrap.
Notifies lead person or supervisor of any parts shortages or machining problems/difficulties.
Packs and washes/preserves parts as needed.
Performs other machining and assembly operations as needed.
Performs other related duties as required.
Interacts with associates from all departments.
Requirements: High School diploma or equivalent.
Technical school training a plus.
3 years of set-up experience minimum required Experience with aerospace products and/or other close tolerance parts is a plus.
Must be familiar with Fanuc and/or Okuma Controls Must be able to set and change tools.
Must be able to use standard gauges and inspection techniques.
Experience with SPC, inspection documentation, and problem solving is a plus.
Strong interpersonal and analytical skills.
Must be able to read and write comments, understand operation sheets/blueprints, specifications, and all applicable company/customer paperwork.
Must be able to read CNC programs.
Five plus years of increasingly diverse experience in a machine shop or CNC machining environment Physical Requirements: Ability to push/pull/carry up to 50 lbs.
Able to stand for up to 8 hours.
PIbcbf0a93e51a-7192
Ability and willingness to train others.
Can work independently and lead a project.
This role is for 1st or 2nd shift.
1st shift is 7am-3:30.
2nd shift is 3:00
- 11:30pm This role is 100% in office at our plant in East Hartford, CT.
At HORST we offer a variety of benefits including but not limited to: Competitive PTO PackagePaid Company Holidays401K Match ProgramMedical, Dental, Vision BenefitsTuition Reimbursement/Assistance Program Major Areas of Responsibility: Set-up and operate CNC Lathes (2-axis and multi-axis) (e.g.
Eurotech, Hardinge, etc.) Will work with blueprints, operation sheets, and other work instructions.
Working from blueprints, operation sheets, travelers or other specifications, set-ups and completes the machining operations to produce a quality part.
Checks to make sure that the material to be used meets all specifications.
Obtains bar stock or material from staging area.
Performs complex set-ups of own work or for others.
Makes all required adjustments to the machinery.
Obtains tooling, gages, inserts and all other equipment needed to complete the set-up and brings up the program.
Edits the program as necessary.
Assists other Operators or Set-up/Operators with set-up or production problems and helps to train other set-up/operators.
Ensures that all manufactured parts are in full compliance to quality standards.
Performs visual inspections (part relationship to operation sheet/blueprint configuration) on all parts produced and performs actual dimensional verification using measuring instruments as per the guidelines established by the department or the Quality Assurance Department.
Replaces all worn or damaged tooling as necessary.
Verifies and records actual part count, both prior to and upon completion of all work Performs all routine maintenance on the equipment and maintains all fluid levels.
Keeps the equipment and work area clean and organized.
Returns excess bar stock or material to the staging area.
Moves the finished work to an assigned area.
Enters all work performed into the database and documents all scrap.
Notifies lead person or supervisor of any parts shortages or machining problems/difficulties.
Packs and washes/preserves parts as needed.
Performs other machining and assembly operations as needed.
Performs other related duties as required.
Interacts with associates from all departments.
Requirements: High School diploma or equivalent.
Technical school training a plus.
3 years of set-up experience minimum required Experience with aerospace products and/or other close tolerance parts is a plus.
Must be familiar with Fanuc and/or Okuma Controls Must be able to set and change tools.
Must be able to use standard gauges and inspection techniques.
Experience with SPC, inspection documentation, and problem solving is a plus.
Strong interpersonal and analytical skills.
Must be able to read and write comments, understand operation sheets/blueprints, specifications, and all applicable company/customer paperwork.
Must be able to read CNC programs.
Five plus years of increasingly diverse experience in a machine shop or CNC machining environment Physical Requirements: Ability to push/pull/carry up to 50 lbs.
Able to stand for up to 8 hours.
PIe4204bd7e1eb-6932
Company Description:
Hanwha Aerospace USA has long been recognized as a leader in the development and supply of flight critical Aerospace/Defense components and assemblies. Operating out of four state-of-the-art facilities located in Connecticut, Hanwha Aerospace USA offers growth and career development opportunities to enrich your talents.
Summary:
We are seeking a skilled and detail oriented Production Supervisor in our Glastonbury location to plan, direct, and coordinate all assigned operations following manufacturing objectives. As a Production Supervisor, you will manage and provide direction to departmental personnel in implementing modern, cost-effective practices to achieve the goals of the department according to all safety, quality, housekeeping, and production standards. This position will supervise all personnel and operations in the department by employing leadership, hands-on technical support, scheduling, and project management.
Essential Functions:
- Monitor manufacturing activities and ensure manufacturing processes are being followed and that all quality requirements are being met or exceeded.
- Review and dispose of all scrap produced in the department which includes effective root cause and corrective action analysis.
- Direct departmental activities providing assurance of safety, health, and compliance with environmental rules and regulations.
- Directly supervises the employees in their department. Carries out supervisory responsibilities in accordance with the organization’s policies and applicable laws.
- Engage in efforts to continuously improve the processes on the shop floor.
- Ensure that HR policies, procedures, and regulations are followed and documented.
- Maintain a thorough knowledge of all processes and equipment.
- Meet departmental metrics.
- Perform other related duties or responsibilities as required.
Required Qualifications & Experience:
- Must be a “U.S. Person” as defined by the U.S. Government and able to work without restrictions with ITAR related data.
- High School Diploma or GED required.
- 5+ years experience in a manufacturing environment; aerospace preferred.
- 3+ years of supervision experience.
Desired Knowledge, Skills, and Abilities:
- Bachelor’s or Associate’s degree in Engineering or other related field preferred.
- Must be able to read, write, understand, and speak English at a functional level.
- Ability to interpret and edit FANUC G-code programming.
- Proficient in FANUC, Okuma controls.
- Ability to communicate professionally and effectively with all levels of the organization.
- Ability to interpret policies, procedures, and standard business practices.
- Ability to read and interpret blueprints and engineering work instructions.
- Ability to initiate, record, recommend, verify, and implement corrective actions or solutions to problems relating to product, process or quality system.
- Fluent in Microsoft Office applications.
- Must have strong attention to detail.
- Ability to travel domestically. – 5%
Reasonable accommodation may be made to enable individuals with disabilities to perform.
Technical Facilities Manager | $110k - $130k | Healthcare, Connecticut
Your new company
Hays have partnered with a leading energy infrastructure service firm, who are looking to hire an experienced Facilities Management leader to oversee the operation and optimization of a Central Energy Plant (CEP). The role will work with key stakeholders in guiding best-in-class energy strategies for thermal producing assets in a healthcare facility.
Your new role
As the Technical Facilities Manager, you will be responsible for analyzing daily energy usage and identifying opportunities to enhance efficiency and improve operational practices. Working daily with internal teams and 3rd party vendors, you will provide mentorship on energy management and support the development of long‑term strategies to maximize performance. The role will take full responsibility for the operation and maintenance of the CEP, ensuring all systems run safely, reliably, and efficiently. This includes managing maintenance reserve accounts, overseeing operator training, maintaining an up‑to‑date plant operating manual, and coordinating troubleshooting activities with both on‑site staff and remote support teams. You will also collaborate closely with engineering, procurement, and construction teams to align project activities with ongoing operations.
What you'll need to succeed
- PE preferred or FE and working towards obtaining PE.
- 4+ years’ experience in any of the following: management experience in a central plant or facility, mechanical construction with a large mechanical subcontractor or MEP design consultant managing multiple sites with large teams.
- 4 year Mechanical Engineering degree (plus, not required).
- Well versed in building codes and standards.
- Excellent communication and organizational skills.
- Effective verbal and written communication skills.
- Detail-oriented with the ability to multitask projects in a fast-paced environment.
What you'll get in return
You will have the opportunity to work with one of the nation’s largest energy‑as‑a‑service providers, with more than a century of industry expertise. With established accounts and long‑term contracts across some of the country’s largest healthcare and education systems, you will play a key role alongside experienced leaders in a mission‑critical environment.
*At Securian Financial the internal position title is Engineering Sr Analyst, Engineering Analyst, or Engineering Consultant. The title and salary will be determined based on experience and applied skills.*
Summary:
The Digital Standards Guide (DSG) team is responsible for the development, maintenance, and evolution of Securian's enterprise design system - delivering reusable, accessible, and brandaligned UI components used across digital experiences. Our work enables consistency, efficiency, and highquality user experiences by partnering closely with UX, design, accessibility, and product teams. We support the full lifecycle of components, from discovery and design through development, testing, accessibility validation, and documentation.
We are seeking a FrontEnd Development Engineer who is passionate about building accessible, scalable, and usercentered interfaces. In this role, you will develop and support DSG components and patterns that empower product teams across the organization. You will work closely with design, accessibility consultants, and product partners to ensure solutions meet brand standards, usability best practices, and technical excellence.
Responsibilities include but not limited to:
Develop, test, review, and maintain frontend components and patterns using HTML, CSS/Sass, JavaScript, and ARIA to meet accessibility standards.
Build reusable, flexible, and scalable UI components and patterns aligned to DSG guidelines and Securian's brand.
Support the component lifecycle, including intake, development, QA, accessibility audit, iteration, and release.
Collaboration & Partnership
Work closely with UX designers, accessibility specialists, analytics partners, and product teams to build solutions that meet user needs.
Participate in design reviews, provide engineering perspective, and advise teams adopting DSG components.
Partner with product teams to identify improvements and ensure successful implementation across applications.
Documentation & Guidance
Contribute to technical documentation, usage guidance, best practices, and migration/support materials for developers and designers.
Assist in maintaining and improving internal DSG resources, including documentation sites and onboarding materials.
Continuous Improvement
Stay up to date on modern frontend standards, accessibility guidelines, and design system best practices.
Identify opportunities to enhance component quality, performance, scalability, and accessibility.
Qualifications:
2+ years of experience with frontend development using HTML, CSS/Sass, and JavaScript.
Strong understanding of semantic markup, accessibility fundamentals, and ARIA.
Experience building reusable, maintainable frontend components or UI patterns.
Proficiency with version control systems (preferably Git, GitHub).
Ability to selfmanage workload, prioritize tasks, and meet deadlines with minimal supervision.
Clear verbal and written communication skills; strong collaboration mindset.
Creative problemsolver with a resultsoriented approach.
Preferred Qualifications:
Experience with design systems or component library development.
Knowledge of WCAG 2.x guidelines and experience writing Level AAcompliant code.
Experience with modern build tools such as npm,Webpack, Rollup, or Vite.
Familiarity with Adobe Experience Manager (AEM).
Experience writing automated tests (unit, visual regression, accessibility).
Experience with CSS preprocessors or frameworks (LESS, Sass).
Familiarity with Web Components and componentdriven architectures.
#LI-hybrid **This position will be in a hybrid working arrangement.**
Securian Financial believes in hybrid work as an integral part of our culture. Associates get the benefit of working both virtually and in our offices. If you're in a commutable distance (90 minutes), you'll join us 3 days each week in our offices to collaborate and build relationships. Our policy allows flexibility for the reality of business and personal schedules.
The estimated base pay range for this job is:
$72,000.00 - $134,000.00Pay may vary depending on job-related factors and individual experience, skills, knowledge, etc. More information on base pay and incentive pay (if applicable) can be discussed with a member of the Securian Financial Talent Acquisition team.
Be you. With us. At Securian Financial, we understand that attracting top talent means offering more than just a job - it means providing a rewarding and fulfilling career. As a valued member of our high-performing team, we want you to connect with your work, your relationships and your community. Enjoy our comprehensive range of benefits designed to enhance your professional growth, well-being and work-life balance, including the advantages listed here:
Paid time off:
We want you to take time off for what matters most to you. Our PTO program provides flexibility for associates to take meaningful time away from work to relax, recharge and spend time doing what's important to them. And Securian Financial rewards associates for their service by providing additional PTO the longer you stay at Securian.
Leave programs: Securian's flexible leave programs allow time off from work for parental leave, caregiver leave for family members, bereavement and military leave.
Holidays: Securian provides nine company paid holidays.
Company-funded pension plan and a 401(k) retirement plan: Share in the success of our company. Securian's 401(k) company contribution is tied to our performance up to 10 percent of eligible earnings, with a target of 5 percent. The amount is based on company results compared to goals related to earnings, sales and service.
Health insurance: From the first day of employment, associates and their eligible family members - including spouses, domestic partners and children - are eligible for medical, dental and vision coverage.
Volunteer time: We know the importance of community. Through company-sponsored events, volunteer paid time off, a dollar-for-dollar matching gift program and more, we encourage you to support organizations important to you.
Associate Resource Groups: Build connections, be yourself and develop meaningful relationships at work through associate-led ARGs. Dedicated groups focus on a variety of interests and affinities, including:
Mental Wellness and Disability
Pride at Securian Financial
Securian Young Professionals Network
Securian Multicultural Network
Securian Women and Allies Network
Servicemember Associate Resource Group
For more information regarding Securian's benefits, please review our Benefits page.
This information is not intended to explain all the provisions of coverage available under these plans. In all cases, the plan document dictates coverage and provisions.
Securian Financial Group, Inc. does not discriminate based on race, color, religion, national origin, sex, gender, gender identity, sexual orientation, age, marital or familial status, pregnancy, disability, genetic information, political affiliation, veteran status, status in regard to public assistance or any other protected status. If you are a job seeker with a disability and require an accommodation to apply for one of our jobs, please contact us by email at , by telephone (voice), or 711 (Relay/TTY).
To view our privacy statement click here
To view our legal statement click here
Remote working/work at home options are available for this role.
The company is a recognized leader in the commercial faade industry, specializing in innovative glazing and curtain wall systems across North America. Known for executing complex, high-value projects with precision and professionalism, they are expanding their national project management team to keep pace with growing demand. Their approach blends craftsmanship with cutting-edge technologyand they're seeking forward-thinking professionals who can lead from anywhere.
The company is seeking a Remote Project Manager with deep experience in commercial glazing or curtain wall systems. This role is ideal for someone who thrives on ownership, excels at remote coordination, and can lead multimillion-dollar faade projects from preconstruction through closeout.
You'll manage every phase of the project lifecycleleveraging digital tools, strong communication, and a process-driven mindset to deliver on time, on budget, and on spec. While you won't be on site every day, your presence will be felt through structured collaboration, proactive planning, and a firm grasp of what it takes to keep complex installations moving forward.
Minimum three years of experience managing glazing or curtain wall projects.
Demonstrated success managing commercial construction projects remotely.
Expertise in architectural, structural, and fabrication drawings.
Strong knowledge of curtain wall, storefront, ACM, or unitized faade systems.
Comfortable leading project updates, vendor negotiations, and client coordination remotely.
Proven ability to manage contracts, track costs, and mitigate risk.
Degree in Construction Management, Engineering, or a related field (or equivalent experience).
Familiarity with Bluebeam, Procore, AutoCAD, or PM platforms.
Existing network of glazing vendors and subcontractors.
Fully remote work with flexible hours.
Collaborative, experienced, and high-performing team.
Opportunities for professional growth and leadership.
Impactful, high-visibility projects across the U.S.
Competitive compensation and benefits package.
Culture that values clarity, accountability, and trust.
Remote working/work at home options are available for this role.
Power Distribution and Make Ready Designer
Overhead Utility Pole Design • Joint-Use Engineering • NESC-Compliant Make-Ready Work
Location: Kalamazoo, MI / Remote (U.S.)
Are you an experienced Power Distribution Designer or Make-Ready Designer looking to support meaningful utility engineering projects? Join a team that values accuracy, collaboration, and long-term professional growth.
ABOUT THIS OPPORTUNITY
We are seeking skilled Make-Ready Designers (primary focus) and Power Distribution Designers to support engineering programs for major electric and telecom utilities. Ideal candidates bring demonstrated experience in overhead utility pole design, NESC application, clearance assessment, pole loading analysis, and construction package development. Useful design platforms include DDS, Katapult, O-Calc, GIS, MicroStation, AutoCAD, or client-specific drafting systems.
In this role, you will review field/walkout data, evaluate existing attachment conditions, model pole loading, determine make-ready requirements, and prepare accurate construction-ready deliverables. Applicants without utility pole design or distribution engineering experience will not be considered.
Note: This position is remote, but new hires must attend a 2-week paid, in-person orientation at our Perrysburg, OH headquarters.
WHAT YOU WILL DO
• Execute overhead distribution and make-ready design work orders while meeting quality, time, and budget expectations
• Apply established engineering design standards, NESC requirements, and internal processes
• Perform end-to-end make-ready, joint-use, and/or general distribution design
• Conduct permitting and easement research (pole ownership, ROW, property rights, approvals)
• Collaborate with team members to resolve design challenges and ensure accurate deliverables
• Use design software such as AutoCAD, MicroStation, DDS, PoleForeman, O-Calc, Katapult, or client systems
• Perform quality control reviews when required
• Support additional duties as assigned
TOP COMPETENCIES & SKILLS
Make-Ready Engineering, Joint-Use Design, Pole Loading Analysis, Utility Pole Design, Overhead Distribution Design, NESC Compliance, Utility Engineering, Pole Attachments, Make-Ready Construction, Aerial Design, Utility Coordination, Right-of-Way Permitting, Pole Replacement Design, Make-Ready Estimates, Field Survey Interpretation, CAD for Utility Design, GIS for Utility Design, Electrical Distribution Design, Utility Construction Standards, Telecommunications Make-Ready
Requirements:
WHAT WE’RE LOOKING FOR
• High school diploma or equivalent required; an associate degree or higher in engineering, drafting, or a related field is preferred
• Minimum 2 years of experience in make-ready engineering, joint-use design, or electric power distribution design (3+ years strongly preferred)
• Proven experience in utility pole design, including NESC application, clearance analysis, pole loading concepts, and preparation of construction-ready design packages
• Proficiency with CAD or MicroStation; experience with DDS, Katapult, O-Calc, or similar utility design platforms is strongly preferred
• Solid understanding of power distribution construction practices, with the ability to learn utility-specific proprietary systems efficiently
• Must hold a valid driver’s license, maintain active auto insurance, and pass all required background, drug, and MVR screenings
• Authorization to work in the United States is required
• Willingness to travel occasionally, including minimal overnight travel when project needs require
• Ability to work a standard Monday–Friday schedule aligned to Eastern Time, with Central/Mountain/Pacific adjustments as appropriate
PHYSICAL REQUIREMENTS
• Ability to work for extended periods using a computer keyboard, monitor, and telephone
• Ability to prepare and analyze data, review detailed information, and work with design tools requiring close vision, distance vision, color vision, peripheral vision, depth perception, and focus adjustment
• Ability to communicate effectively through oral and written channels
ABOUT SIGMA TECHNOLOGIES
Sigma Technologies is a growing engineering and design firm with 500+ team members across 30+ states. For over 25 years, we’ve supported major power and telecommunications utilities with work that directly impacts communities nationwide. Our core values — Safety, Honesty, Truth, and Decency — shape how we work and who we hire. We are TeamSigma™.
*To learn more about working at Sigma, view our video and career page.
* If you do not have Power Design experience, please refer to our other open positions: *While Designer openings are listed in multiple locations, you only need to apply to one, as they are remote roles.
WHAT WE OFFER
We want our Associates to stay healthy, happy, and secure. We offer a positive work environment with supportive coworkers, managers, and leaders, plus:
• No-cost monthly healthcare plan option for employees
• Competitive pay
• Medical, dental, and vision plans with up to 80% of the premium sponsored by Sigma
• 401(k) plan with matching contributions up to 5% of salary
• Paid holidays, vacation, and sick time
• Education and professional licensing assistance programs
This job advertisement is intended to outline the primary responsibilities and requirements of the role. It is not all-inclusive. Additional duties may be assigned as needed. This ad does not constitute an employment agreement, and job requirements may change based on organizational needs.
Pay is commensurate with experience and education. Sigma is an equal opportunity employer and does not discriminate based on race, color, gender, sexual preference, gender identity, age, religion, national origin, disability, genetic information, veteran/military status, or any classification protected by law.
PM22
#Remote
PI7087748e2d7e-3631
Remote working/work at home options are available for this role.
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries regarding the following opportunity, please contact our Talent Specialist, Abdul at (224) 507-1295 Title: Training Coordinator
- Hybrid Duration: 12 Months Location: Charlotte, NC, Schedule: 3 days in office, 2 days remote Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered.
Description: Reports to: Manager, Customer Education Purpose of Position: The Global Marketing Customer Education and Programs Team is responsible for delivering best in class, industry-leading Marketing Programs and Customer Education.
These programs and trainings deliver product awareness, solutions, and services through both hands-on and virtual educational offerings extending Client's Customers and Program Members product preference and brand loyalty.
The Training Coordinator, Customer Education will be responsible for supporting Customer Education initiatives such as supporting program members, training/alliance partners, and other applicable customers in the In-Building, Data Center, and Carrier Markets.
This person will take direction from the Manager, Customer Education to develop the annual education plan for USCAN.
They will project lead the development of class content, marketing materials, and class scheduling to ensure that the education plan is aligned with business strategy and is successfully executed.
The Customer Education team has a global footprint, and this role will be expected to have a cross-regional approach to ensure trainings and content within is supported uniformly within each region.
We support each other collectively to assist in team development, cross training and execution of events is vital! Additionally, is the expectation for cross-functional team support for paid classes, hands-on seminars, and field-level events.
Experience in marketing, customer service, and event management is recommended.
Fiber optic knowledge and training experience is helpful.
Major Roles and Responsibilities Growth and maintenance for customer training program that promotes and supports global marketing initiatives across markets and solutions.
Collaborate with Channel Marketing, Regional Marketing, Sales Engineers, Product Line Managers, and Engineering Services to identify Customer Education needs and future opportunities with a specific market audience.
With the direction and strategy from the Manager, Customer Education, develop and project manage Training Events both live and virtual to support the overall In-Building Network (IBN), Data Center and Carrier (CN) Sales strategy.
Collaborate with subject matter expects in Systems Engineering, Field Engineering, Application Engineers, and Regional/Applications Marketing regarding content and instructional design and develop or source training content and curriculum.
Work with Engineering Services and Field Engineering to build and maintain product samples and equipment to support class curriculum.
Collaborate with Distribution Branch Managers and Sales Engineers nationwide to coordinate logistics for live education classes.
Build promotional campaigns through marketing tools such as social media, marketing automation software and traditional inbound and outbound campaigns to support promotion of customer education events.
Maintain certifications and customer/program education records and report on results from Customer Education program.
Work with event planning software (Cvent) to set up accurate event registration/promotion, registration and after event reporting.
Establish and build relationships with external suppliers as needed.
Operate within a specified customer education budget.
Be available to provide basic customer support for program members.
Help maintain and develop program databases and processes to continually improve the training program.
As a representative of Client Optical Communications, ensure that you convey the highest level of integrity in behavior and appearance and help to fulfill all customer expectations as a premier supplier.
Skill and Knowledge Requirements: Education Requirement: BS/BA Marketing, Communications, or equivalent degree Required Experience: 2 years in marketing, communications, event planning or related experience Experience with instruction or training coordination and/or delivery preferred Desire to work with and learn software and cloud applications Required Skills: Planning and organizing Strong interpersonal skills Data gathering and analysis Problem analysis and problem solving Attention to detail Resourcefulness Basic knowledge and understanding of fiber optic networks What type of software will be used? Presentation Software (PowerPoint/Presenter) Microsoft Office SharePoint Marketing Automation Software (Marketo) Webinar Delivery Systems (AdobeConnect and WebEx Event Center) Social Media Platforms (LinkedIn) Event Planning Software (Cvent) This position does not support immigration sponsorship.
About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
Planning and Organizing, Problem Analysis and Problem Solving, Data Gathering and Analysis
Remote working/work at home options are available for this role.
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries about this opportunity, please contact one of our Talent Specialists, Hari at (224) 507-1278 Title: Mechanical Drafting Technician II
- Hybrid Location: Concord, NC Duration: 12 Months Base Schedule:Monday
- Friday, 8 AM
- 5 PM OT Required: 45 hours per week target Work Environment: Employment will be through a third party on a contract basis.
Contracts will be 1 year in length and are often extended with satisfactory performance and additional project workload.
Hybrid work schedule available (work from home 3-4 days per week) Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered.
Description: Summary: As a member of a global drafting department you will assist in the creation, revision, and storage of electronic drawing files (Autodesk Inventor and AutoCAD) for custom designed process equipment located in numerous worldwide Client Optical Fiber and Cable manufacturing locations.
Primary responsibilities include assisting the area drafting lead with completing all required work to an engineering/development drawing set prior to release into the system (Autodesk Vault).
Typical tasks include creating 3D models and associated drawings or editing existing models/drawings all while ensuring they follow company drafting standards: detail, sheet metal, weldment, and assembly drawings are typical.
No new design activity will be within scope of this position.
Key Responsibilities: Correct redlined models/drawings issued by drafting lead or engineering/development teams Convert legacy hand drawn and AutoCAD drawings into 3D models and associative drawings Create 2D drawings from existing 3D models from other users Collect data from engineering teams and incorporate information into appropriate drawing Collect measurements/information from production floor to incorporate into drawings Required Education: Candidates should possess one of the following, but other technical degrees with demonstrated skills in drafting will be considered: o A.A.S.
Mechanical Engineering Technology degree o A.O.S.
Drafting/CAD degree o Drafting Certificate/Certification Candidates without degrees must demonstrate proficiency in 2D and 3D drafting Required Experience and Skills: Minimum of 2 years professional experience in the mechanical drafting field Working knowledge of ASME/ANSI drafting standards General Windows-based computer skills Proficient in the use of Autodesk Inventor and Autodesk Vault software Able to adapt to company standards and guidelines Strong work ethic Strong attention to detail Interview Process: 1 Phone screen or Teams call 2 In Person Interview About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
AutoCad, Autodesk Inventor, ASME/ANSI, Autodesk Vault
Remote working/work at home options are available for this role.
