Engineering Structures Jobs Salary Jobs in Pinecraft Florida

Location: Sarasota, FL (on-site)

Type: Full-time | New manufacturing site launch

The mission: Stand up a sterile medical-device manufacturing operation from the ground up. You’ll lead process design and validation for an initial portfolio of 3 products, build and qualify cleanroom production, and partner closely with Quality/Regulatory, Documentation, and Manufacturing Technicians to reach commercial readiness. Deep technical expertise in precision manufacturing is required.

What you’ll do

• Greenfield setup: Specify, source, and commission production equipment; design cell layout, material flow, and environmental controls for ISO-class cleanrooms.
• Process development & validation: Author and execute IQ/OQ/PQ; develop robust, statistically controlled processes (DOE, SPC, MSA, GR&R).
• Sterile manufacturing readiness: Establish validated sterilization pathways (e.g., EtO, gamma, or e-beam) and packaging validations per ISO 11607.
• Documentation: Create/own DMR/DMRIs, pFMEAs, control plans, work instructions, and change control with full revision discipline.
• Quality systems partnership: Work hand-in-hand with QA/RA to meet FDA 21 CFR 820 / ISO 13485; support internal/external audits and CAPA/RCA.
• Scale & throughput: Build line balance, takt, and capacity models; drive scrap/downtime reduction; implement error-proofing (poka-yoke), visual controls, and standard work.
• Training & leadership: Mentor techs; transfer processes to production; build operator certification plans.
• HSE & compliance: Enforce cleanroom behaviors (gowning, environmental monitoring, bio-burden/particulates), EHS, and OSHA requirements.
• Launch metrics: Hit PPAP/first-article targets (where applicable), release lots to spec, and meet cost/quality/delivery objectives.
• Manufacturing Operations & Facility Management
• Manage day-to-day manufacturing facility operations; oversee precision welding, annealing, material processing, fabrication, and assembly.
• Lead vertical integration initiatives including technology transfer, equipment selection, installation, qualification, and process development.
• Develop and validate process parameters; ensure capacity planning meets production demands while maintaining quality standards.
• Monitor equipment utilization, uptime, and overall equipment effectiveness (OEE).

What you’ll bring

• BS in Engineering (Mechanical, Manufacturing, Biomedical, or related).
• 5–10 years in medical-device manufacturing, including cleanroom assembly/packaging and sterile product lines.
• Hands-on with IQ/OQ/PQ, PFMEA/Control Plan, DOE, and statistical tools.
• Familiarity with ISO 13485, 21 CFR 820, ISO 14971 (risk), ISO 11607 (packaging).
• Proven start-up or tech-transfer experience (new line/site/equipment).
• Strong CAD (SolidWorks/AutoCAD), MRP/ERP user skills, and excellent technical writing.

Nice-to-haves

• Sterilization validation (EtO/gamma/e-beam) ownership; packaging seal integrity and transit testing.
• Six Sigma/Lean cert (Green/Black Belt).
• Automation/vision systems, fixture design, and validation.
• Supplier/process PPAP; IQC controls.

Success indicators (first 6–12 months)

• Cleanroom qualified; processes validated (IQ/OQ/PQ) for 3 products.
• FPY ≥ 95% on released lots; scrap ≤ 2–3% by month 6.
• On-time delivery ≥ 98% after ramp; no major audit findings.
• Complete, audit-ready DMR and training matrices for each line.

Job Title: Production Control Coordinator – Precision Manufacturing

Location: Sarasota, FL (On-site)

Full-Time

About the Role

We are seeking a Production Control Coordinator to support a fast-paced precision manufacturing environment. This is a hands-on role responsible for managing work orders, production flow, and material coordination to ensure jobs move efficiently through the shop floor.

You will work closely with manufacturing, engineering, and operations teams to maintain accurate production scheduling, documentation, and workflow control.

Key Responsibilities

• Create, release, and manage work orders and manufacturing travelers
• Coordinate production scheduling and job routing
• Track WIP (work-in-process) and monitor job progress
• Manage raw material planning, blank sizing, and material utilization
• Prepare cut plans / core plans for production
• Ensure tooling, fixtures, and machine readiness before job release
• Maintain production documentation, traceability, and records
• Collaborate with CNC programmers, technicians, and inspection teams
• Support quality checks and manufacturing workflow efficiency

Qualifications

• Experience in production control, manufacturing planning, or scheduling
• Strong knowledge of work order management and job shop environments
• Experience with ERP / MRP systems
• Ability to track and manage WIP and production flow
• Strong attention to detail and organizational skills

Preferred (Nice to Have)

• Experience in precision manufacturing or optical fabrication
• Knowledge of raw material planning and yield calculations
• Familiarity with manufacturing documentation and traceability processes

Why Apply

• Work in a high-precision manufacturing environment
• Be part of a hands-on operations team
• Opportunity to grow within a technical production setting

Commercial Construction Superintendent

Location: Sarasota, FL

Employment Type: Full Time

Experience: 8+ years as a Superintendent

Industry: Commercial Construction

Confidential Search Led by Hays

About the Opportunity

Hays is partnering with two highly respected general contractors in the Sarasota market who are looking to bring on an experienced Commercial Superintendent. These teams have strong local reputations, steady pipelines, and long‑term growth opportunities. This is a great fit for a Superintendent who wants to stay local and lead midsize commercial projects with support from well‑structured field leadership.

What You Will Do

• Lead day‑to‑day field operations on midsize commercial ground up and renovation projects

• Manage subcontractors, site coordination, safety, scheduling, and quality control

• Work closely with project managers and field leadership to ensure timely, high‑quality delivery

• Oversee daily reporting, inspections, and communication with ownership teams

• Represent the builder professionally with clients, inspectors, and trade partners

• Maintain clean and organized job sites and uphold all safety standards

What We’re Looking For

• Eight or more years of experience as a Commercial Superintendent

• Experience with ground up and interior renovation projects in the $1M to $20M range

• Strong communication skills and the ability to lead subs effectively

• Proven track record of delivering projects on time and with high quality

• Experience coordinating schedules, inspections, and daily field reporting

• Local to Sarasota or able to commute comfortably

Why These Opportunities Stand Out

• Stable and well‑respected Sarasota GCs with long‑term local pipelines

• Supportive leadership teams with strong communication and planning

• Projects are local to Sarasota with minimal travel required

• Opportunity to grow within established field teams

• Competitive compensation structure and comprehensive benefits

Interested in Learning More?

If you’d like to explore these Superintendent opportunities confidentially, please apply directly or reach out to:

Emily Grant,

The Project Manager is responsible for overseeing all aspects of the architectural projects. The Project Manager oversees the Project Architect to ultimately ensure the highest quality construction documents. The Project Manager will oversee all phases of the project schedule, including Pre-Design, Schematic Design, Design Development, Construction Documents, Bidding and Construction Administration. This position reports to the Client Executive/Principal Architect and is charged with ensuring the project is completed on time and within budget constraints in accordance PBK's quality and client service standards.

• Supervise and manage Project Architect and the project team to ensure high quality construction documents.
• Ensure that the project is completed on time and within budget.
• Organize and direct the architectural and/or engineering teams to execute the work in an orderly, timely, and coordinated manner.
• Direct, organize and mentor junior staff with responsibility oversight of their assignments.
• Responsible for maintaining positive client relationships throughout project. Keep client apprised of project progress on regular basis.
• Provide technical advice to the project team.
• Support Client Executive and/or Principal Architect in supervision and delegation of work.
• Lead Construction administration jobsite meetings with contractors and owners.

• Bachelor's Degree in Architecture or related field is required.
• Must be a Licensed Architect.
• 7+ years of professional experience preferred.
• Ability to professionally communicate both verbally and in writing to give assignments to office support staff, consultants, and vendors.
• Willingness to make decisions; exhibit sound and accurate judgment; support and explain reasoning for decisions; include appropriate people in decision-making process; make timely decisions.
• Must demonstrate proficiency in using Revit.
• Strong customer service, organizational, and communication skills required.
• Knowledge of building codes required.

ABOUT OUR CLIENT

Multifamily Owner/Builder actively seeking a Lead Superintendent to lead Multifamily projects through to completion. Lead Superintendent will have the opportunity to work on site for projects throughout the Sarasota area.

Client is a Florida based Developer turned Owner/Builder. They are kicking off a massive pipeline with a project in Sarasota.

JOB DESCRIPTION

The Superintendent will have a strong track record of completing Ground Up Multifamily Construction, ensuring their successful delivery within schedule and budget along with the ability to manage vendors, subcontractors, field staff throughout project.

Select Responsibilities:

• Provide field oversight for all phases of assigned construction projects
• Experience with Ground up multifamily projects (garden and podium style)
• Develop and manage project schedules.
• Manage subcontractor performance relationships.
• Be responsible for both the timeliness and total quality of assigned projects.
• Prepare project documentation for coordination and effective site management.
• Implement and execute Quality Control/Quality Assurance program.
• Promote an Injury-free job site through safety initiatives and award winning Company safety program.

CANDIDATE QUALIFICATIONS

• 8-20 years of construction management and/or craft supervisor experience
• Engineering, Construction Management or Architectural degree, or equivalent experience
• Exceptional knowledge of construction processes and procedures; ability to successfully manage complex projects through to completion
• Excellent verbal and written communication skills, including ability to effectively communicate with internal and external customers
• Ability to work under pressure and meet deadlines, while maintaining a positive attitude and providing exemplary customer service
• Displays willingness to make decisions and includes the appropriate people within the decision making process
• Ability to use time productively, maximize efficiency and meet challenging work goals
• Ability to maintain compliance with all company policies and procedures
• Observes safety and security procedures and reports potentially unsafe conditions
• Looks for ways to continuously improve both personally and professionally
• Must be willing to travel on site to locations nationally
• Knowledge of all phases of multifamily construction.

WHAT'S ON OFFER

• Competitive base salary ($120,000 - $170,000) plus compensation package to include medical/dental/vision options, 401k, bonus (project/annual), PTO, vehicle allowance or company vehicle, per diem (if traveling), and growth potential
• Opportunity to join a reputable firm with strong pipeline of projects

A respected and growing heavy civil contractor based in Sarasota, Florida is seeking a knowledgeable Safety Director to oversee and enhance the company’s safety program. The organization focuses on underground utilities, site development, roadway construction, and earthwork projects throughout the Southwest Florida region. This role is ideal for a safety professional who is passionate about creating a strong safety culture, supporting field operations, and ensuring compliance across multiple active jobsites.

Key Responsibilities

• Direct and manage the company’s safety initiatives across all active projects, including underground utilities, sitework, roadway construction, and infrastructure development.
• Develop, implement, and update safety policies, procedures, and training programs to maintain compliance with OSHA and applicable state and local regulations.
• Perform routine jobsite visits, safety inspections, and audits to identify potential hazards and reinforce safe work practices.
• Partner with project managers, superintendents, and field personnel to incorporate safety planning into daily operations and project workflows.
• Lead investigations of incidents, injuries, and near-misses to determine root causes and establish preventative measures.
• Maintain safety records, documentation, and reporting required for regulatory compliance and internal tracking.
• Organize and conduct safety meetings, orientations, and toolbox talks for employees and subcontractors.
• Monitor safety performance metrics and provide regular reports and recommendations to executive leadership.
• Assist with workers’ compensation management and return-to-work coordination when necessary.
• Participate in preconstruction planning to evaluate safety risks and develop mitigation strategies.
• Promote a company-wide culture that prioritizes safety, accountability, and continuous improvement.

Qualifications

• 6+ years of experience in construction safety, preferably within heavy civil.
• Strong understanding of OSHA standards and construction safety best practices.
• Experience performing jobsite safety audits, conducting training, and leading incident investigations.
• Ability to work collaboratively with field teams while enforcing safety policies and procedures.
• Excellent communication, leadership, and organizational skills.
• Experience using safety management or reporting software is a plus.
• OSHA 30 certification required; OSHA 500, CHST, CSP, or related certifications are highly valued.
• A degree in Safety Management, Construction Management, Engineering, or a related discipline is preferred but not mandatory.

What This Opportunity Offers

• Competitive salary and benefits package based on experience.
• Long-term stability with a well-established and growing contractor.
• The opportunity to lead safety efforts across a variety of impactful civil infrastructure projects throughout Southwest Florida.
• A supportive leadership team and collaborative company culture.
• Strong potential for professional growth as the company continues to expand.