Engineering Structures Jobs Salary Jobs in Nm

Citizen, U.Person, or Immigration Status Requirements:S. government issued security clearance is required. S. citizens are eligible for a security clearance Security Clearance Type:Secret Security Clearance Status:Active and existing security clearance required after day 1

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. The Tactical Radars and Effectors department within Raytheon Hardware Engineering supports the development, production, and deployment of multiple defense products including radars, missiles, command and control systems, and naval electronics. The products support US Government and international customers.

This position will support the Land & Air Defense Systems missile and launcher product lines based in Tucson, AZ, and may require domestic and international travel to suppliers, Raytheon facilities, and customer sites. Support the factory and suppliers with product development, obsolescence, troubleshooting, domestically and internationally.

~ Interface with other engineering disciplines, non-technical disciplines, and suppliers to develop design solutions and resolve technical challenges.

~ Work with limited supervision and meet commitments for assigned schedule, financial, and technical goals.

~ Working knowledge of First Article Inspection process (FAI), work along side Quality engineers in support of that in addition to Raytheon Source Inspection (RSI).

~ Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 5 years of prior relevant experience unless prohibited by local laws/regulations, or An Advanced Degree in a related field and minimum 3 years experience.Experience with design, development, and production of mechanical equipment and/or hardware, preferably for use in Military environments.Experience in the development, creation, release, and updates of mechanical technical data packages.Experience in the review and interpretation of technical documentation in a production environment.Advanced degree in mechanical engineering, manufacturing engineering, or hardware system design.Experience with production environment for military products.Experience working in a factory supporting full-rate production of missile components and assemblies.Working knowledge of Military and Commercial Specifications.Experience with CREO (Pro/E) or similar 3D solid modeling software.Experience with PTC Windchill Product Data Management or equivalent configuration/data management software.Must possess strong technical writing and oral communication skills.Must b e able to work autonomously with minimal supervision.Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. This includes all production and maintenance employees, as they are essential to the development of our products.

Tucson has a friendly, caring, and laid-back atmosphere, combined with the innovation and energy of a metropolitan region, and recognized as one of America's 10 Best Small Cities. Tucson is known for its bright blue skies, and with more than 310 sunny days per year, Tucson's fantastic weather lets residents enjoy the outdoors year-round.

Virtual Fly Over City of Tucson & Community, YouTube Video Links

"As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.

All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act.

Privacy Policy and Terms:Click on this link to read the Policy and Terms

Citizen, U.Person, or Immigration Status Requirements:S. government issued security clearance is required. S. citizens are eligible for a security clearance Security Clearance Type:Secret Security Clearance Status:Active and existing security clearance required after day 1

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. The Tactical Radars and Effectors department within Raytheon Hardware Engineering supports the development, production, and deployment of multiple defense products including radars, missiles, command and control systems, and naval electronics. The products support US Government and international customers.

This position will support the Land & Air Defense Systems missile and launcher product lines based in Tucson, AZ, and may require domestic and international travel to suppliers, Raytheon facilities, and customer sites. Support the factory and suppliers with product development, obsolescence, troubleshooting, domestically and internationally.

~ Interface with other engineering disciplines, non-technical disciplines, and suppliers to develop design solutions and resolve technical challenges.

~ Work with limited supervision and meet commitments for assigned schedule, financial, and technical goals.

~ Working knowledge of First Article Inspection process (FAI), work along side Quality engineers in support of that in addition to Raytheon Source Inspection (RSI).

~ Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 5 years of prior relevant experience unless prohibited by local laws/regulations, or An Advanced Degree in a related field and minimum 3 years experience.Experience with design, development, and production of mechanical equipment and/or hardware, preferably for use in Military environments.Experience in the development, creation, release, and updates of mechanical technical data packages.Experience in the review and interpretation of technical documentation in a production environment.Advanced degree in mechanical engineering, manufacturing engineering, or hardware system design.Experience with production environment for military products.Experience working in a factory supporting full-rate production of missile components and assemblies.Working knowledge of Military and Commercial Specifications.Experience with CREO (Pro/E) or similar 3D solid modeling software.Experience with PTC Windchill Product Data Management or equivalent configuration/data management software.Must possess strong technical writing and oral communication skills.Must b e able to work autonomously with minimal supervision.Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. This includes all production and maintenance employees, as they are essential to the development of our products.

Tucson has a friendly, caring, and laid-back atmosphere, combined with the innovation and energy of a metropolitan region, and recognized as one of America's 10 Best Small Cities. Tucson is known for its bright blue skies, and with more than 310 sunny days per year, Tucson's fantastic weather lets residents enjoy the outdoors year-round.

Virtual Fly Over City of Tucson & Community, YouTube Video Links

"As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.

All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act.

Privacy Policy and Terms:Click on this link to read the Policy and Terms

• 
  
• Analyze malfunctions and repair all two and four stroke engine driven equipment as required to ensure proper working condition for the customer
  
• Conduct preventive maintenance to avoid unnecessary repairs and down time
  
• Perform safety inspections on equipment
  
• Create work order and assess time and cost of repairs
  
• Maintains a clean and safe shop work environment
  
• Adhere to all governmental, company and equipment related safety requirements
  

• 
  
• A minimum of 2-5 years experience in diagnosing and repairing 2 and 4 stroke engines
  
• Rental experience preferred
  
• Good reading and comprehension skills
  
• Good customer service and communication skill
  
• The ability to consistently lift up to 50 pounds
  
• Must have your own tools
  
• Have a valid driver's license
  

Project Controls Engineer 4

Compa Industries is searching for qualified candidates for a Senior Project Controls Engineer position at the Los Alamos National Laboratory in Los Alamos, NM.

Salary: $85/hr - $90/hr

Location: Los Alamos, NM (Onsite)

Citizenship: US citizenship Required

Work Schedule: 9/80 schedule

The Project Controls Engineer will play a critical role in supporting the Earned Value Management System (EVMS) and the broader Project Controls System at Los Alamos National Laboratory (LANL). This position significantly influences the success of high-impact projects through expert cost engineering, scheduling, and project management support. The specialist will contribute to developing advanced techniques and standards, guiding project teams, and ensuring projects remain on schedule and within budget.

Responsibilities and Duties

• Perform cost estimating, cost analysis, and control activities for highly complex projects.
• Supervise and provide technical direction for planning/scheduling and cost engineering activities.
• Develop and maintain project schedules and monitor progress against milestones.
• Prepare, review, and present detailed cost engineering and scheduling reports.
• Analyze cost trends and schedule performance for management attention.
• Provide innovative solutions to project control challenges and guide technical teams.
• Act as a subject matter expert in EVMS tools and processes.
• Utilize independent judgment to determine the best course of action for achieving project objectives.
• Work under consultative direction and with minimal supervision to meet long-range project goals.
• Support project administrative and organizational tasks, including financial reporting and status updates.

Minimum Qualifications

Demonstrated experience in project controls functions, including:

• Planning and scheduling (development, control, analysis)
• Cost engineering (estimating, control, financial reporting, and analysis)
• Proficiency in multiple software applications used for project controls and cost analysis.
• Experience with supervision, personnel administration, and technical training.
• Understanding of financial reporting systems and cost control procedures.
• Ability to work independently with wide latitude in methods and evaluation criteria.

Desired Skills

• Subject matter expertise in project management and EVMS.
• Proven ability to implement corrective actions and monitor project progress.
• Familiarity with engineering principles related to technical project implementation.
• Knowledge of control account management (CAM) duties and responsibilities.
• Strong analytical skills with the ability to develop innovative solutions to complex issues.
• Viewed as an expert in the field with the ability to guide the development of future concepts and project methodologies.

Education and Experience Requirements

• Bachelor's degree in a relevant field.
• Minimum of twelve (12) years of related experience.
• An equivalent combination of education and experience may be considered.
• Post-graduate coursework or certifications in project controls or engineering disciplines is preferred.

Next Steps

If you are a driven and highly experienced project controls professional seeking a pivotal role in national security and scientific innovation, we encourage you to apply. Please submit your resume to be considered for this opportunity at Los Alamos National Laboratory. A recruiter from Compa Industries will contact qualified candidates to discuss next steps.

Why Work at COMPA Industries?

We strive to provide careers, not just jobs, for our employees. We invest in and serve the communities where we work and live. We provide best-in-class administrative, professional, and technical services to solve complex problems to meet customer mission-critical objectives.

For over 30 years, Compa has been a trusted partner in progress. We combine decades of technical expertise with a forward-thinking spirit, tackling intricate challenges in nuclear facilities alongside the brightest minds in science and engineering. Join us, and don't just build your career, build the future, with competitive compensation, a collaborative culture, and the chance to make a real difference for national security and beyond.

COMPA is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, national origin, sexual orientation, disability, or protected Veteran status.

COMPA's policy could disqualify an applicant who has certain criminal history from employment in particular positions.

Project Controls Engineer 4

Location: Los Alamos, NM (Onsite)

Schedule: 9/80 Work Schedule

Pay Rate: $85/hr – $91/hr

Assignment Duration: 1 Year

Positions Available: 2

Position Overview

We are seeking an experienced Project Controls 4 to support project execution activities at Los Alamos National Laboratory (LANL). This role provides senior-level expertise in project planning, scheduling, cost engineering, and Earned Value Management (EVMS) to ensure successful delivery of complex technical projects.

The ideal candidate will have extensive experience in project controls systems, cost estimating, schedule development, and financial analysis, with the ability to identify cost and schedule trends and provide actionable recommendations to project leadership.

This position works under consultative direction and may provide technical oversight and leadership for project controls teams, ensuring compliance with project objectives, schedules, and financial targets.

Key Responsibilities

• Support and maintain the Earned Value Management System (EVMS) and project controls processes.
• Perform cost estimating, cost analysis, cost control, and financial reporting activities for complex projects.
• Develop, maintain, and monitor project schedules, ensuring alignment with project milestones and deliverables.
• Identify cost and schedule trends and provide analysis and recommendations to project leadership.
• Supervise or provide technical direction for planning, scheduling, and cost engineering activities.
• Prepare and review cost reports, schedule analysis, and project performance metrics.
• Support project organizational and administrative activities including budget tracking and performance monitoring.
• Provide innovative solutions to cost and schedule challenges on complex technical projects.
• Develop advanced concepts, techniques, and standards to improve project control performance.
• Collaborate with cross-functional teams to ensure project objectives are achieved on time and within budget.

Required Qualifications

• Bachelor's degree in Engineering, Construction Management, Project Controls, or related field.
• 12+ years of related project controls experience or equivalent combination of education and experience.
• Strong experience with cost estimating, cost control, and financial analysis for large projects.
• Demonstrated experience with schedule development, monitoring, and analysis.
• Experience supporting EVMS-based project environments.
• Strong analytical, organizational, and communication skills.
• Proficiency with Microsoft Office (Excel, Word, and related tools).
• Ability to work independently and provide leadership on complex project assignments.

Preferred Qualifications

• Experience working in DOE, NNSA, or federal project environments.
• Prior experience supporting engineering, construction, or technical programs.
• Experience working as a Control Account Manager (CAM) or supporting project budgets and financial reporting systems.
• Knowledge of project financial status reporting and earned revenue tracking.

Work Environment

• Onsite position located in Los Alamos, NM.
• 9/80 work schedule.
• Work performed in a non-secure area with no clearance required for start.
• Position supports project activities within the PC organization at LANL.

Equal Opportunity Employer

COMPA Industries is an Equal Opportunity Employer. We consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or other protected characteristics.

Notice to Recruiting Agencies

COMPA Industries does not accept unsolicited resumes from third-party recruiting agencies.

No C2C or agency submissions will be accepted.

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

Raytheon Sensor Test Solutions (STS) is actively seeking an onsite Electrical Prototyping Fabrication Technician to join the Test Equipment Engineering Directorate in Tucson, Arizona.

The Test Equipment Engineering Directorate (TEE) includes all engineering disciplines responsible for systems design & test on every Raytheon product. Our engineers are responsible for each element of the development lifecycle for test including test requirements, test system design, flight simulations, hardware-in-the-loop, computer-in-the-loop, advanced engineering prototyping technology, flight operations for manned and unmanned vehicles, environmental testing, environmental characterization and engineering laboratory management. 

We are hands-on, designing with the latest technology and tools, and integrate state of the art test solutions with the most advanced engineering systems in the world.

Electrical Prototyping Fabrication Technicians work in an engineering environment to co-develop engineering hardware in accordance with customer and internal requirements, as well as industry standards. Candidates will collaborate with multi-disciplined design teams across multiple projects to bring design concepts to fruition, providing rapid engineering, fabrication and prototyping solutions throughout the entire product lifecycle.  

This position is 100% ONSITE in Tucson, Arizona.

What You Will Do

• Fabricate, maintain, modify, and repair complex prototype electrical assemblies

• Rely on extensive experience to interpret drawings, schematics, 3D models, written notes, and specifications

• Lead other technicians in the layout and fitment of electrical, electro-optical, electro-mechanical, and mechanical assemblies

• Adapt methods and procedures to test, analyze, and troubleshoot new hardware

• Apply advanced skills to test, inspect, and prove-in complex prototype electrical assemblies

• Lead in electrical/mechanical engineering drawing peer reviews to validate engineering design specifications in development of producible prototypes

• Assess complex designs to ensure producibility, maintainability, safety, and reliability

• Communicate build concerns to customers and collaborate on design improvements

• Work in closed/proprietary/classified areas without access to personal communication devices such as phones/tablets, etc

Qualifications You Must Have

• Typically requires an AA/AS degree (or other 2-year post high school training) with a minimum of 8 years relevant experience

• Experience in an engineering environment, testing and fabricating electrical assemblies in four or more of the following areas:

  • cables or wire harnesses

  • breakout boxes

  • chassis, circuit card modifications

  • racked electronic equipment

  • troubleshooting of systems in an integration environment

• Experience reading and interpreting electrical and mechanical drawings and schematics

• The ability to obtain and maintain a U.S. government issued Secret security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance.​

Qualifications We Prefer

• Experience analyzing and interpreting schematics and drawings to identify producibility issues

• Military electronics or avionics training

• Familiarity with 3D drawings and CAD tools

• J-STD-001 Solder certification

• IPC 610 & 620 Acceptability certifications and inspection experience

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

Learn More & Apply Now!

Please consider the following role type definition as you apply for this role:

Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: Information

This position is in beautiful Tucson, AZ. Tucson has a friendly, caring and laid-back atmosphere, combined with the innovation and energy of a metropolitan region and recognized as one of America’s 10 Best Small Cities. Surrounded by beautiful mountains, colorful Sonoran Desert landscape and majestic saguaro cacti, Tucson is blessed with some of nature’s best work. Tucson is known for its bright blue skies, and with more than 310 sunny days per year, Tucson’s fantastic weather lets residents enjoy the outdoors year-round.

Tucson, AZ: ,-az-location

Raytheon Information - part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

About the Role

As Quality Manager, you will set, own, and elevate the standards that guide product and process quality. You will develop and communicate site quality policies, lead and coach a quality team, and maintain a compliant and effective quality management system aligned to ISO 9001 and AS9100. You will partner across operations, engineering, and supply chain to drive continuous improvement, reduce the cost of quality, and strengthen customer satisfaction using structured, data‐driven methods.

Responsibilities

• You will establish and socialize quality standards and procedures so products and processes meet defined benchmarks.
• You will administer and improve the quality management system, monitor progress against quality goals, and facilitate formal reviews.
• You will lead problem solving and corrective actions using approaches such as root cause analysis, 8D, SPC, and CAPA to address customer, internal, and supplier issues with both immediate containment and durable solutions.
• You will guide activities that include inspection and visual standards, control of nonconforming material, and Material Review Board decisions.
• You will evaluate incoming material, in‐process quality, and finished goods, and work with operations to strengthen capability and stability.
• You will plan and execute continuous improvement initiatives that include value stream mapping, cost reduction, and waste elimination while capturing and standardizing best practices.
• You will manage required documentation under ISO 9001 and AS9100 and internal procedures, including PPAPs, control plans, process flow diagrams, FMEAs, measurement system and gage studies, and SPC charts.
• You will prepare and present clear, actionable reporting on quality metrics, trends, and risks to site and corporate stakeholders.
• You will engage customers and suppliers on quality concerns, audit readiness, systemic improvements, and joint action plans, representing the organization with credibility and a solutions mindset.
• You will lead, develop, and empower the quality team through coaching, training, and clear objectives.

Qualifications

• You hold a bachelor's degree and at least six years of relevant experience in manufacturing quality with demonstrated ownership of site or business unit results.

Required Skills

• You have comprehensive knowledge of quality concepts and principles and apply them with sound judgment and independence.
• You are fluent in ISO 9001 and ideally AS9100 and comfortable producing and maintaining core quality documentation such as PPAP, control plans, process flows, FMEAs, MSA and gage studies, and SPC.
• You are a strong people leader who sets direction, coaches for performance, and builds collaborative relationships across operations, engineering, supply chain, and with customers and suppliers.
• You think analytically, communicate clearly in writing and in person, and use a structured approach to problem solving and continuous improvement.
• You are comfortable with data and reporting and with standard quality and business systems.
• Experience influencing budgets, strategic planning, and procedural change is beneficial.
• You have the ability to review and work with ITAR‐controlled technical data and documents.

Preferred Skills

• Experience influencing budgets, strategic planning, and procedural change is beneficial.

Pay range and compensation package

We offer a competitive compensation package with performance‐based incentives, comprehensive benefits, retirement programs, and professional development.

Equal Opportunity Statement

We are an equal opportunity employer. All qualified applicants will receive consideration without regard to any protected characteristic.

Work Authorization

This role involves access to ITAR‐controlled technical data. Eligibility to work with such data is required.

We're building safety-enhancing technology for aviation that will save lives. Automated aviation systems will enable a future where air transportation is safer, more convenient and fundamentally transformative to the way goods - and eventually people - move around the planet. We are a team of mission-driven engineers with experience across aerospace, robotics and self-driving cars working to make this future a reality.

As a Sr. Manufacturing Engineer (Aircraft Integration) at Reliable Robotics, you'll play a critical role in developing and continuously improving our manufacturing, installation, and maintenance processes to meet design, regulatory, and business requirements (including safety, quality, cost, and on-time delivery). This is a growing team of highly motivated people who are passionate about delivering quality products and services on time, with unquestionable value. You will be responsible for our automation system's installation and maintenance, including hands-on installations, procedure development, documentation, conducting design for excellence (DFx) reviews, and developing the processes and infrastructure to help the business scale. The projects you work on will set the foundation for how the business operates for years to come. This is a fantastic opportunity to work in a safety-critical environment that takes our products from prototype to production, in a hands-on environment.

Responsibilities

• Responsible for installation, inspection, maintenance, repair, modification, testing, and fabrication of the Reliable-designed mechanical, electromechanical, and electrical/avionics assemblies, harnessing, interconnects, and other commercial-off-the-shelf (COTS) products

• Conduct design for excellence (DFx) reviews to evaluate designs for cost, producibility, inspectability, consistency, adequacy, accuracy, and conformance to requirements

• Collaborate with design, quality, and certification teams to embed manufacturability, compliance, and risk mitigation in all phases of product development (e.g., prototype, R&D, certification, and production)

• Develop and ensure compliance with all policies, procedures, quality management systems, technical bulletins, engineering orders, service bulletins, and airworthiness directives

• Develop processes to ensure accurate, current, and complete documentation (installation and inspection records, logbook entries, etc.) is utilized and maintained

• Lead root-cause analysis and implement timely corrective actions to maintain schedule, quality, and reliability

• Ensure an adequate supply of tools, serviceable parts, components, and consumables necessary for aircraft servicing and maintenance is maintained

Basic Success Criteria

• Bachelor's Degree in Mechanical, Electrical, Aerospace, Systems Engineering, or 7+ years of relevant experience leading aircraft maintenance/modification operations

• 7+ years of aircraft design, manufacturing, inspection, and/or testing experience

• 2+ years of experience leading complex projects or programs in aerospace, autonomy, or robotics

• 2+ years of experience with computer-aided design (CAD) and Product Lifecycle Management (PLM) software, such as Altium, NX, and Teamcenter

Preferred Success Criteria

• Holder of an FAA-accredited Airframe & Powerplant (A&P) Certificate

• Prototype/R&D development or New Product Introduction (NPI) experience

• Experience with industry or regulatory requirements such as AS9100, CFR 14 CFR 21.137, and/or 14 CFR Part 145

• Knowledge of highly complex medium to heavy turbine-powered aircraft, their powerplants, flight and stabilization controls, pneumatic, fuel systems, electronic engine, hydraulic, and navigation systems

• Maintenance and rigging experience on P&W PT6A Engines/Airframes

• Previous leadership or management experience

Our team is passionate about delivering on our commitments, solving hard problems, continuously improving, and helping the business succeed. We are constantly reevaluating our technologies, products, and capabilities. If you are a lifelong learner, you will love this environment. Get in on the ground floor and help us build the company.

The position will be located at our facility in Albuquerque, NM, but will require frequent travel to San Martin, California.

Must be willing to travel 30% of the time (primarily training in San Martin, CA).

The estimated salary range for this position is $135,000 to $190,000. At Reliable Robotics, we strive to provide competitive and rewarding compensation based on experience and expertise, as well as market conditions, location, and pay equity.

In addition to base compensation, Reliable Robotics offers stock options, employee medical, 401k contribution, great co-workers, and a casual work environment.

This position requires access to information that is subject to U.S. export controls. An offer of employment will be contingent upon the applicant's capacity to perform in compliance with U.S. export control laws.

All applicants are asked to provide documentation that legally establishes status as a U.S. person or non-U.S. person (and nationalities in the case of a non-U.S. person). Where the applicant is not a U.S. person, meaning not a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident, (iii) refugee under 8 U.S.C. * 1157, or (iv) asylee under 8 U.S.C. * 1158, or not otherwise permitted to access the export-controlled technology without U.S. government authorization, the Company reserves the right not to apply for an export license for such applicants whose access to export-controlled technology or software source code requires authorization and may decline to proceed with the application process and any offer of employment on that basis.

At Reliable Robotics, our goal is to be a diverse and inclusive workforce. As an Equal Opportunity Employer, we do not discriminate on the basis of race, religion, color, creed, ancestry, sex, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, age, non-disqualifying physical or mental disability or medical conditions, national origin, military or veteran status, genetic information, marital status, or any other basis covered by applicable law. All employment and promotion is decided on the basis of qualifications, merit, and business need.

If you require reasonable accommodation in completing an application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to

Compensation Range: $135K - $190K

• Identify opportunities to improve current changeover practices.
• Determine longest-lead tasks and develop process standards.
• Partner with team leads to optimize resource allocation.
• Design pre-changeover preparation strategies.
• Coach teams in treating changeovers with the same rigor as production, including scheduling, resource planning, and issue escalation.
• Create best-practice methods for clearing longest-lead items.

• Collaborate with FSQ partners to determine risk rankings and cleaning requirements.
• Build understanding across teams about why each cleaning task is performed.
• Identify and eliminate over-cleaning where appropriate.
• Create or update standard task flows to accelerate changeovers while maintaining safety and effectiveness.

• Identify pain points and investigate the underlying reasons for cleaning tasks.
• Explore equipment, process, or tooling changes that simplify cleaning.
• Evaluate potential capital investments and present recommendations to engineering.
• Implement viable non-capital improvements.
• Conduct responsible, data-backed experiments to validate new ideas.

• Benchmark cleaning and changeover practices from other sites or industries.
• Incorporate best practices from non-traditional sources (e.g., dental cleaning tools, vehicle detailing processes, automated wash systems).
• Adapt external insights to develop safer, faster, more effective internal cleaning methods.

• Bachelor's degree (Engineering or Technical field preferred) and at least 5 years of related manufacturing experience

• High school diploma and at least 10 years of related manufacturing experience
• Working knowledge of manufacturing data systems (e.g., asset management, storeroom systems, quality tracking, ERP, safety/environmental systems)
• Demonstrated ability to apply foundational manufacturing systems and utilize operational standards
• Effective verbal and written communication skills
• Proven ability to coach teams, utilize standards, and apply continuous improvement principles

• Formal Lean or Continuous Improvement training

• Continuous Improvement Methodologies
• Effective Communication Skills

About Castelion

Castelion is bringing a new approach to defense development and production: one that focuses on short, iterative design cycles, rapid testing in development, and modern commercial manufacturing strategies for production at scale. We're designing, building, and testing next generation long range strike weapon systems to give America and its Allies a definitive edge and deter future conflicts.

EHS Manager (Rio Rancho)

The EHS Manager will lead Environmental, Health, and Safety efforts for Castelion's Rio Rancho, New Mexico facility, supporting solid rocket motor manufacturing, integration, and test operations. This role is responsible for building and managing site EHS programs to ensure safe operations and regulatory compliance within a fast-paced, high-hazard manufacturing environment.

The EHS Manager will play a key role in facility startup, commissioning, and ramp to production, partnering closely with operations, engineering, and leadership to embed safety and environmental stewardship across development and manufacturing. The ideal candidate brings experience in process safety, hazard analysis, and regulatory compliance in aerospace, manufacturing, energetics, or other high-consequence environments, and will also provide periodic EHS support to Castelion's Midland, Texas test facility.

Responsibilities

• Serve as the EHS leader for the Rio Rancho facility, responsible for developing and managing site EHS programs, systems, and policies to ensure safe operations and regulatory compliance.
• Lead EHS planning and execution during facility startup, commissioning, and ramp to production, partnering with operations and engineering to integrate safety and environmental requirements into processes, equipment, and daily operations.
• Develop and maintain process safety and risk management programs, including hazard analyses (HAZOP, LOPA, FMEA) and risk assessments to identify and mitigate operational hazards.
• Ensure compliance with OSHA, EPA, ATF, NFPA, and applicable state and local regulations, including oversight of environmental programs such as hazardous waste, air emissions, stormwater management, and regulatory reporting.
• Implement and continuously improve safety programs through audits, inspections, training, and safety initiatives that strengthen operational discipline and safety culture.
• Lead incident investigations and root cause analysis for safety or environmental events, implementing corrective and preventive actions and maintaining site emergency response plans and preparedness.
• Provide periodic EHS support to Castelion's Midland, Texas facility, including audits, incident support, and program development as needed.

Basic Qualifications

• Bachelor's degree in Environmental Health & Safety, Environmental Engineering, Chemical Engineering, Industrial Engineering, Safety Engineering, or a related technical field.
• 5+ years of experience supporting EHS and process safety programs in manufacturing, test, or other high-hazard operational environments.
• Experience implementing process safety management and hazard analysis techniques (HAZOP, LOPA, FMEA).
• Strong working knowledge of OSHA, EPA, ATF, NFPA, and applicable state and local regulations.
• Experience leading incident investigations and corrective action programs.
• Hands-on experience developing and implementing EHS programs in manufacturing or test environments.
• Strong communication and leadership skills with the ability to influence cross-functional teams.
• Willingness and ability to travel periodically to support Midland, Texas operations.

Preferred Skills and Experience

• Professional certification such as CSP, CIH, or similar.
• Experience supporting solid rocket motor manufacturing, propulsion systems, energetics, or explosive/high-energy material operations.
• Experience supporting facility startup, commissioning, or greenfield manufacturing site development.
• Familiarity with EHS management systems such as ISO 14001 and ISO 45001.
• Experience applying continuous improvement and risk-based safety methodologies.

All employees are granted long-term stock incentives as part of their employment as Castelion. All employees receive access to comprehensive medical, vision, and dental insurance, and the company offers three weeks of paid time off per year.

Leadership Qualities

Bias to Action and Creative Problem Solving. Desire and experience questioning assumptions in ways that lead to break through ideas that are ultimately implemented. Successfully bring in applicable processes/concepts/materials from other industries to achieve efficiency gains. Ability to personally resolve minor issues in development without requiring significant support.

High Commitment, High Initiative. A successful candidate will have a genuine passion for Castelion's mission and consistently look for ways to contribute to the company's technical goals and prevent hardware blockers. Ability to work in a fast paced, autonomously driven, and demanding atmosphere. Strong sense of accountability and integrity.

Clear Communicator. Proactively communicates blockers. Trusted in previous roles to be voice of company with regulators, suppliers, gate keepers and customers. Capable of tactfully managing relationships with stakeholders to achieve company-desired outcomes without compromising relationships. Emails, IMs and verbal interactions are logical, drive clarity, and detailed enough to eliminate ambiguity.

ITAR Requirements:

• To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.

Employment with Castelion is governed on the basis of competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.