Engineering Structures Jobs Remote Jobs in Washington Remote

WHO WE ARE

Whether in your home, office or out in your community, the walls that surround you must be safe, structurally sound, and sustainable. It's our job to make that happen.

We were created by act of Congress in 1974 to be the nation's authoritative source of findings and recommendations that impact and improve the built environment for the American people. At the National Institute of Building Sciences (NIBS), we connect research, policy, and practical application to advance innovation in the built environment. Our mission is to create a safer, more resilient, and technologically advanced infrastructure that serves American communities and strengthens our nation's future.

Building American Innovation isn't just our tagline - it's our commitment. We foster collaboration between government, industry, and academia to drive forward-thinking strategies for resilient communities. Because at NIBS, we don't just build structures, we build solutions.

SUMMARY

We are looking for a proactive Senior Associate, Building Science Knowledge Systems, who will support and help manage projects that strengthen the National Institute of Building Sciences (NIBS) ability to assemble, store, and disseminate codes, standards, performance criteria, and best practices in the built environment. Our goal is to make knowledge easier to access and understand so that buildings are safer, more efficient, and more innovative. This role will own defined project workstreams and support multi-stakeholder projects to ensure alignment with client goals, scope, schedule, budget, and quality standards. The Senior Associate will coordinate with internal team members and subcontractors, contribute to clear communication and reporting, and help ensure effective knowledge transfer across the organization.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.

• Support planning, execution, monitoring, and closeout of assigned projects and workstreams with emphasis on building technology and innovation.
• Draft and maintain project workplans and schedules for assigned projects and workstreams.
• Support defining and documenting project scope, deliverables, KPIs, and success criteria; maintain trackers and dashboards for performance reporting.
• Support budget, schedule, and resource management for assigned projects; assist with Estimate to Complete (ETC), forecasting, and status reporting; flag variances and recommend corrective actions.
• Identify, track, and help mitigate tasks, project risks, and client relationship risks; escalate issues as needed.
• Support quality assurance activities to help ensure deliverables meet client expectations and internal standards.
• Coordinate day-to-day activities across cross-functional teams including architects, engineers, researchers, IT specialists, and subcontractors.
• Support client communications by preparing meeting materials, notes, and regular status updates; participate in client calls as needed.
• Support knowledge management practices: maintain project files, ensure accessibility of content, capture lessons learned, and contribute to continuous improvement.
• Support stakeholder engagement activities such as workshops, webinars, and technical meetings, including logistics, agendas, and follow-up.
• Monitor industry trends in digital codes & standards and AEC innovative solutions; share relevant insights and help apply best practices to project delivery.
• Surface resourcing, skill, and process gaps that may affect delivery and share recommendations with the project lead and senior leaders.
• Contribute to continuous improvement efforts by suggesting repeatable approaches, templates, and knowledge management practices; support change management activities as needed.
• Adhere to and support compliance with organizational standards, federal contracting norms, and relevant industry regulations.
• Self-manage workloads and proactively coordinate with supervisor and project lead on priorities, risks, and capacity.
• Support business development by contributing to proposal inputs, capturing client needs, and identifying organic growth opportunities through project-based relationships.
• Contribute to NIBS external presence by supporting presentations, drafting technical content, and participating in industry forums as appropriate.

SECURITY CLEARANCE

A security clearance is not required, however ability to be granted or to obtain at a minimum, an interim Secret security clearance during employment and then obtain and maintain a Secret security clearance throughout the period of employment, is strongly preferred.

SUPERVISORY RESPONSIBILITIES

This position does not have direct report responsibilities. The Senior Associate may provide task-level guidance to internal team members and contracted staff within assigned workstreams.

QUALIFICATIONS

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations will be made to enable individuals with disabilities to perform the essential functions.

EDUCATION AND/OR EXPERIENCE

The ideal candidate will possess a Bachelors degree in a STEM field, project management, or construction management, though a combination of equivalent education and professional experience will be considered. The position requires 1-3+ years of experience leading, supporting, or coordinating projects, with a preference for experience within the built environment. The successful candidate will demonstrate the ability to manage defined workstreams, track scope/schedule/budget inputs, and produce high-quality deliverables with appropriate guidance. Experience supporting federal government contracting and reporting requirements is preferred.

TECHNICAL AND OTHER SPECIALIZED SKILLS AND ABILITIES:

• Proficiency of project management methodologies (PMI, Agile, or equivalent).
• Proficiency with project management software, MS Office Suite, and project collaboration tools (e.g., SharePoint, Power BI).
• Conceptual understanding or better in processes, tools, and data standards required to deploy Artificial Intelligence for the built environment and blockchain for the built environment.
• Ability to digest client needs into actionable steps, document steps, update schedules, and coordinate and direct team members and subcontractors in completing work.
• Excellent written, verbal, and graphical communication skills.
• Strong collaboration, facilitation, and stakeholder management skills.
• Ability to thrive in a dynamic, collaborative, and fast-paced environment.

PHYSICAL DEMANDS

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is regularly required to sit; use hands to finger, handle, or feel; and reach with hands and arms. The employee is required to walk and talk or hear. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, color vision, and depth perception.

WORK ENVIRONMENT

NIBS is primarily a remote work environment. Position specific business needs will determine when individuals need to work in the office or on-site at a third party. For example, meetings with external and internal stakeholders can necessitate coming to the office. Staff can voluntarily choose to work in the office at any time. The physical demand of NIBS positions is typical of those in an office environment. Positions require frequent use of a computer to communicate both orally and in writing.

Estimated amount of travel, not including periodic trips to the office, is 5-10%.

BENEFITS

• NIBS offers a competitive salary and benefits package including fully paid health care premiums for medical, dental, and vision.
• Opportunity to work at the intersection of industry, government, and academia.
• Work alongside some of the most respected experts in the building sciences and technology fields, gaining insight into best practices across industry and government.
• Professional development and training opportunities.

HOW TO APPLY

If you feel you are a great fit for this role, please send your resume, cover letter, and salary requirement to today!

Technical Designer

Everett, WA/ Seattle, WA/ Auburn, WA/ Renton, WA/ Portland, OR

Onsite

Technical Designer

- Applies fundamental drafting principles and design concept understanding to support solutions to product/process issues as they occur real-time in the fabrication flow. Create drafted parts and product structures to support operational and quality concerns.

- Performs model definition changes within the defined engineering based on engineering input. Translating the engineer's conceptual ideas and feedback into physical part geometry and assembly definition.

- Engages in cross functional, collaborative environments across the life cycle of the products to support design change and improvement.

- Maintains technical excellence in performing work with career intent to progress into technical designer job role.

- Participate and have the ability to learn in the real-time, fast pace, agile environment with a positive attitude. Work may be first, second, or third shift within a standard or alternate work week; as well as some weekend and/or daily overtime

Position Responsibilities:

- Provides materials and process support to and systems design teams throughout the full life cycle of the airplane from design to production to fleet support. Activities include definition of electrical, electronic, and electromechanical components used across products.

- Reviews electrical component materials and process specifications and other engineering documents used to control design, certify and produce systems hardware.

- Identifying impacts of non-conformances associated with electrical components and corrective/preventative actions for future avoidance.

- Conducts engineering lab / failure analysis to help determine cause and corrective action of failed electrical components

- Leads in evaluation of emerging technologies for potential application to future BCA products enabling a competitive advantage.

- Leads or collaborates with multiple engineering teams, Design, Stress, Quality, Manufacturing, and Suppliers to solve a variety of materials and process challenges throughout the full life cycle of the airplane.

- Produces requirements, specifications and other documents to manage the deployment of tools, equipment, materials, parts and processes used to enhance the full life cycle.

Basic Qualifications:

- Associate degree and typical experience in drafting classification (or combination of education and experience), basic understanding and usage of computer aided design, basic understanding of design product structure (details, parts, assemblies, installations), understanding in machining of metallic parts.

- 9+ years of experience working with aerospace design, including experience working with detail and assembly parts

- CATIA or equivalent solid modeling experience

- Integrated Visualization Tool (IVT) use and experience

Preferred Qualifications:

- Problem solving skills

- Investigative skills

- Multi-tasking skills

- Project management experience working with projects at various stages and coordinating with multiple organizations

* Experience working in lab environments

Education / Experience: AA degree in related discipline and typically 9 or more years of related experience or an equivalent combination of education and experience

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Aviation Maintenance Technician to join our Field team in Moses Lake, Washington .

As an Aviation Maintenance Technician, you will be essential in maintaining the highest standards of quality and safety in aircraft operations. Your role will involve performing a wide range of maintenance tasks on aircraft structures and systems, where your attention to detail and adherence to safety protocols are critical. A Color Vision Certification may be necessary for portions of this job. You will troubleshoot and inspect aircraft to ensure they are flight-ready, diligently documenting all maintenance activities to comply with industry regulations. Your technical expertise will enable you to execute repairs and modifications effectively, ensuring that all work meets stringent specifications.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meets regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities :

• Perform production installations, maintenance, preventative maintenance, and alterations on aircraft structures, systems, and sub-systems, including electrical and avionics, for both standard and experimental certificated aircraft.

• Troubleshoot, inspect, test, repair, and service aircraft and engine systems to ensure they are flight-ready, documenting any nonconforming materials or components according to established specifications and procedures.

• Conduct audits and surveillance of manufacturing and quality assurance processes, including customer/FAA coordination, configuration change verification, conformity inspections, and airworthiness inspections.

• Utilize technical specifications, sketches, manuals, and FAA publications to effectively complete work assignments.

• Maintain company and FAA-required records and inspection forms while ensuring a safe, clean, and organized work environment.

• Plan and organize work packages to promote safe and efficient operations, meeting predetermined schedules.

• Operate various information systems, including company web-based systems and Microsoft Office products, to perform assigned tasks.

• Interpret and adhere to airworthiness directives, service bulletins, and other approved data.

• Apply mathematical calculations to set up and use precision measuring tools for accurate measurements.

• Create production aids as needed to facilitate work assignments.

• Maintain necessary certifications, licenses, and permits for assigned work.

• Exchange information with suppliers, customers, or company representatives to explain or demonstrate operations and tests.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.62 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Resumes of current Puget Sound and Moses Lake Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).

Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process. Failure to complete the assessment will remove you from consideration.

Basic Qualifications:

• 3+ years of experience with aircraft maintenance on powered aircraft with military, airline or certificated repair station background (an A&P certificate and/or completion of A&P training at an accredited institution will count for 2 years of experience) OR with troubleshooting electrical systems or complex mechanical systems (e.g. hydraulics, pneumatics, heavy machinery, diesel, construction).

• 3+ years of experience removing, reworking and installing skin panels, bulkheads, frames, stringers, ribs, floor beams, and other structural members.

• Ability to complete Fall Protection Training.

• Ability to work in Confined Spaces (work within or pass through). Entry diameter 9.5”X17.7”

• Must be willing to work any shift, including days, evenings, nights, and weekends.

Preferred Qualifications:

• FAA Airframe and Powerplant Certificate. Please note your certificate number on your resume if you are certified.

• 5+ of aircraft maintenance experience on powered aircraft with military, airline or certificated repair station background (an A&P certificate and/or completion of A&P training at an accredited institution will count for 2 years of experience).

• 3+ years of experience working with precision measuring tools.

• 3+ years of experience operating forklifts, scissor lifts, boom lifts and related equipment.

• 3+ years of experience with flight control rigging.

• 3+ years of aircraft maintenance experience; experience with fuel cell systems preferred.

• Familiarity with structural engineering liaison processes and the ability to work from engineering dispositions, stress analysis instructions, and SRM limitations.

Conflict of Interest:

Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• This position offers relocation based on candidate eligibility.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement :

• This position is for a variety of shifts.

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $35.32/hour, with potential to earn up to $62.45/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Mar. 23, 2026

Language Requirements

English Preferred

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for a Composite Fabricator to join our Fabrication team in Everett and Renton, Washington.

As a Composite Fabricator, you will play a vital role in ensuring the highest standards of quality and safety in the production of non-metallic components for our Airplanes. Your expertise will be essential in fabricating and assembling parts with precision, utilizing various methods and equipment while adhering to established safety protocols. You will be responsible for maintaining a safe working environment, ensuring that all processes meet rigorous quality specifications. Your attention to detail and commitment to excellence will directly impact the integrity of our products.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Fabricate, assemble, rework, repair, and finish a variety of non-metallic parts, tools, and assemblies to specifications using methods such as layup, foaming, bonding, molding, and drap forming.
• Operate mixers, impregnating equipment, heat treaters, curing equipment, formers, presses, and ovens according to established procedures, as well as various cutting equipment for flat pattern cuts of composite materials.
• Collaborate with Manufacturing and Engineering to provide input on design optimization for developmental and emergent projects.
• Utilize prints, charts, change notices, sketches, work orders, and engineering drawings to complete work assignments effectively.
• Impregnate materials and cut fabrics to size using appropriate tools such as knives and shears.
• Hand and machine finish parts to required tolerances, ensuring proper fit within completed assemblies.
• Sand and polish molds to achieve smooth surfaces and wrap mandrels with impregnated materials to meet specifications.
• Place vacuum bags over wrapped parts, test for leaks, and seal any identified leaks in pressure and vacuum bags.
• Prepare and apply protective materials, lacquers, and parting agents to molds, forms, and dies.
• Load, unload, and operate ovens, presses, and pressure bags during the curing process of parts and assemblies.
• Drill, trim, seal, part-mark, sand, and edge break parts to meet production requirements.
• Select and secure appropriate tools, fixtures, and equipment to accomplish assigned work.
• Use shop mathematics and precision measuring instruments to ensure accuracy in work assignments.
• Perform Total Preventive Maintenance (TPM) on equipment, including cleaning, oiling, greasing, and changing filters to maintain optimal operation.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
• Work in environments that may involve contact with metals, solvents, and coolants.
• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
• Adapt to varying noise levels and atmospheric conditions.
• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.F.R. § 120.62 is required. "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• 3 months or more reading and interpreting engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design).
• 3 months or more with structure materials and processes including metals, composites, bonded and bolted joints.
• 3 months or more experience accessing a database for details work instructions.
• 3 months or more experience using precision measuring tools (i.e. micrometers, calipers, depth gauges, etc.).
• 3 months or more experience in composite fabrication.
• Must be able to lift, push, pull up to 35 pounds frequently within an 8 hour shift.
• Must be able to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.

Preferred Qualifications:

• Comfortable working from high/exposed places, tight spaces and working from ladders.
• Ability to work in noisy environments while completing tasks.

Conflict of Interest:Successful candidates for this position must successfully complete the Company's Conflict of Interest (COI) assessment process.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

This position is for a variety of shifts.

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $24.32/hour, with potential to earn up to $48.90/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Mar. 31, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Power Plant B to become part of our Join and Installation team in Everett and Kent, Washington.

Join our dynamic team as an Assembler Power Plant B, where your skills will be pivotal in constructing and assembling critical aircraft components. In this essential role, you will utilize production drawings and specifications to accurately install, fit, and align parts for power packs and strut assemblies. Your attention to detail will ensure that each component is meticulously drilled, reamed, and riveted, while your expertise in pre-assembly will streamline the process for wiring harnesses and tubing assemblies. You will operate advanced material handling equipment to efficiently load and unload engines and struts. Your ability to verify dimensions and check for defects will be crucial in maintaining our commitment to excellence. If you are passionate about aviation and thrive in a collaborative environment, we invite you to contribute to our mission of delivering high-quality aircraft systems.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Install, fit, fasten, align, adjust, and connect parts and assemblies to build aircraft power packs and strut assemblies.

• Use production drawings, specifications, and assembly pages to derive measurements and locate points for part marking and layout preparation.

• Perform drilling, reaming, riveting, and soldering necessary for assembly tasks.

• Review work orders and installation plans to determine job priorities and obtain appropriate drawings and production illustrations.

• Obtain and verify kitted detail parts and assemblies, ensuring they are correct and free of defects.

• Pre-assemble components such as wiring harnesses and tubing assemblies using power and hand tools.

• Operate material handling equipment, including overhead cranes and scissor lifts, to load and unload engines and struts.

• Align parts and assemblies to mating surfaces, temporarily securing them in place and checking for proper alignment.

• Attach, seal, and connect parts, assemblies, and wires using the correct fasteners and tools, tightening per specifications.

• Torque fasteners and install safety devices such as lock wires and cotter pins as required by drawings or specifications.

• Seal hydraulic fittings and access doors, applying necessary fluids, primers, and adhesives according to specifications.

• Operate various tools, including pull rivet guns and countersinks, to fasten and torque parts and assemblies.

• Verify close tolerance dimensions using precision measuring tools and check work for defects before inspection.

• Maintain personal and tool certifications, ensuring compliance with safety and operational standards.

• Communicate with team leaders and supervisors regarding job progress, issues, and assistance needed, while consulting with engineering and planning as required.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Do you meet this requirement?

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• 1+ years of experience working with mechanical or structures related statements of work; such as construction, aerospace, automotive, maritime or similar industry; this can include education and military.

• 1+ year experience utilizing and following detailed work instructions, reading and interpreting blueprints, drawings, and specifications.

• Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.

• Ability to lift up to 35 pounds.

• This position requires you to wear eye, hearing, foot, hand, respirator and other personal protective equipment/safety gear at all times.

• Proficiency in reading, writing, and speaking English

Preferred Qualifications:

• 1+ years of experience performing aircraft structural work or equivalate.

• 1+ years of experience using high impact vibratory tools; such as bucking/riveting.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program

Conflict of Interest: 

• Successful candidates for this position must successfully complete the Company’s Conflict of Interest (COI) assessment process.

Typical Education & Experience:

• High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace

• Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

• This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Safety Sensitive Statement:

• This is a safety-sensitive position and is subject to Department of Transportation (DOT) random drug and alcohol testing.

Shift Work Statement:

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $25.00/hour, with potential to earn up to $55.30/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Sept. 04, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

This is a Program direct-support position and requires a technical understanding of piece part electronic components and their assembly level applications.  This candidate will transition into a key leadership position in the supporting program Obsolescence Integrated Product Team and will drive issue resolution for situations involving obsolescence.  

The selected candidate will perform and/or assist in the performance of Parts Engineering, Components Engineering or Applications Engineering tasks supporting programs in the Proposal, System Design Description, Low Rate Initial Production, Production and Support phases. Position will require day to day interface with Designers, Contracts, Estimating, Supply Chain, Program Management, and other disciplines. 

 
This position is an onsite role, located in Tucson, AZ.

What You Will Do: 

• Understand and/or generate a program statement of work (SOW) and other defined customer component application requirements. 

• Develop and/or sustain a proactive Obsolescence Management process to deliver cost saving obsolescence mitigation strategies and solutions. 

• Drive resolution through support or execution of lifetime buys, selections of alternate parts, redesign efforts or other mitigation strategies and will facilitate and support contract negotiations, basis of estimates, and supplier statements of work for proposal efforts. 

• Interact with Program and customer leadership on a regular basis to communicate status of mitigation strategies. 

• Conduct trade study analysis help identify cost effective obsolescence driven cut in points for proposed unit redesigns.

Qualifications You Must Have:  

• Typically requires a Bachelor’s in Science, Technology, Engineering, or Mathematics (STEM) and a minimum of 5 years of prior relevant experience with any combination of the following:

• Experience with proactive and reactive component obsolescence management methodologies. 

• Experience with data collection, analysis, and presentation skills to adequately discuss system impact of component obsolescence issues. 

• Experience with project management working with schedules, costs, and integration of stakeholder needs throughout the obsolescence process. 

• Financial and Contract Management experience with proposals, BOE, EVMs, SOWs, CLINs and CDRLs. 

• Experience with BOM (Bill of Material) development and management for developmental and production programs. 

• Risk and Opportunity business case analysis experience supporting sustainment vs redesign cut in decisions. 

Qualifications We Prefer:  

• Master’s Degree in Electrical Engineering or other related science or engineering discipline 

• Ability to navigate multiple complex processes and tools. 

• Understanding of the application of technical theories and concepts as they apply to electronic components and the parts management field. 

• Ability to read and interpret engineering drawings and hierarchy definition. 

• Knowledge of component failure modes by commodity 

• Knowledge of Component MIL drawings, standards, test specifications, and associated QPLs and QMLs 

• Knowledge of component selection, screening, qualification, and derating for use in military, and aerospace flight applications 

• Knowledge of analog design and analysis, general knowledge of digital circuitry and interfaces 

• Excellent communication skills to interface with other Integrated Product Team members, including Electrical Engineering, Mechanical Engineering, Supply Chain Management, Quality, Operations, and Supplier Engineering.  

• Capable of supporting regular customer interactions including but not limited to leadership engagements, responding to proposal requests and contract negotiations. 

• Outstanding organizational, presentation and technical skills. 

• Ability to multi-task and appropriately prioritize responsibilities. 

• Willingness to support occasional travel.  

What We Offer  

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation. 

This position offers relocation based on candidate eligibility.

Learn More & Apply Now!  

This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:  

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

This is a Program direct-support position and requires a technical understanding of piece part electronic components and their assembly level applications.  This candidate will transition into a key leadership position in the supporting program Obsolescence Integrated Product Team and will drive issue resolution for situations involving obsolescence.  

The selected candidate will perform and/or assist in the performance of Parts Engineering, Components Engineering or Applications Engineering tasks supporting programs in the Proposal, System Design Description, Low Rate Initial Production, Production and Support phases. Position will require day to day interface with Designers, Contracts, Estimating, Supply Chain, Program Management, and other disciplines. 

 
This position is an onsite role, located in Tucson, AZ.

What You Will Do: 

• Understand and/or generate a program statement of work (SOW) and other defined customer component application requirements. 

• Develop and/or sustain a proactive Obsolescence Management process to deliver cost saving obsolescence mitigation strategies and solutions. 

• Drive resolution through support or execution of lifetime buys, selections of alternate parts, redesign efforts or other mitigation strategies and will facilitate and support contract negotiations, basis of estimates, and supplier statements of work for proposal efforts. 

• Interact with Program and customer leadership on a regular basis to communicate status of mitigation strategies. 

• Conduct trade study analysis help identify cost effective obsolescence driven cut in points for proposed unit redesigns.

Qualifications You Must Have:  

• Typically requires a Bachelor’s in Science, Technology, Engineering, or Mathematics (STEM) and a minimum of 5 years of prior relevant experience with any combination of the following:

• Experience with proactive and reactive component obsolescence management methodologies. 

• Experience with data collection, analysis, and presentation skills to adequately discuss system impact of component obsolescence issues. 

• Experience with project management working with schedules, costs, and integration of stakeholder needs throughout the obsolescence process. 

• Financial and Contract Management experience with proposals, BOE, EVMs, SOWs, CLINs and CDRLs. 

• Experience with BOM (Bill of Material) development and management for developmental and production programs. 

• Risk and Opportunity business case analysis experience supporting sustainment vs redesign cut in decisions. 

Qualifications We Prefer:  

• Master’s Degree in Electrical Engineering or other related science or engineering discipline 

• Ability to navigate multiple complex processes and tools. 

• Understanding of the application of technical theories and concepts as they apply to electronic components and the parts management field. 

• Ability to read and interpret engineering drawings and hierarchy definition. 

• Knowledge of component failure modes by commodity 

• Knowledge of Component MIL drawings, standards, test specifications, and associated QPLs and QMLs 

• Knowledge of component selection, screening, qualification, and derating for use in military, and aerospace flight applications 

• Knowledge of analog design and analysis, general knowledge of digital circuitry and interfaces 

• Excellent communication skills to interface with other Integrated Product Team members, including Electrical Engineering, Mechanical Engineering, Supply Chain Management, Quality, Operations, and Supplier Engineering.  

• Capable of supporting regular customer interactions including but not limited to leadership engagements, responding to proposal requests and contract negotiations. 

• Outstanding organizational, presentation and technical skills. 

• Ability to multi-task and appropriately prioritize responsibilities. 

• Willingness to support occasional travel.  

What We Offer  

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation. 

This position offers relocation based on candidate eligibility.

Learn More & Apply Now!  

This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:  

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

The Clinical Affairs Manager will provide clinical expertise, insight, and support to clinical end-users, clinical sales specialists, sales team, Regulatory, Engineering, marketing, and other corporate departments on safe and effective use of the Teleflex Medical product portfolio with primary emphasis on the Coronary/Structural Heart franchise. This position will support the appropriate clinical application of the Coronary/Structural Heart franchise via didactic, web-based, and teleconference education, and understanding of these products and best practices. Clinical support will be provided to physicians, nurses, techs, etc., to include support for live cases/proctorships in the therapeutic areas related to focus products. The Clinical Affairs Manager will drive innovation by identifying product attributes necessary to expand into new markets, or capitalize on new clinical applications; identify new, clinically driven product and market opportunities; and perform other related duties as required. Provide support during society engagements, facilitating the exchange of scientific information in close collaboration with CMA leadership and the broader clinical affairs interventional team.

Customer Experience Representing Teleflex in a customer-facing position is a tremendous responsibility and opportunity. All CMA colleagues are expected to perform with the highest levels of professionalism, service, and ethics to strengthen the Teleflex brand and relationship with our customers. Continuous Improvement - Demonstrates initiative and critical thinking to identify, prioritize process and performance gaps. Develops solutions to deliver improved results. Exemplifies continuous improvement thought processes and focus. Culture and Values Exemplifies Teleflex values and ensures a fair, open, and productive climate that is engaging, ethical, and legally compliant. Strives to work effectively across boundaries in a complex matrix environment. Identify and support BU field efforts for the Coronary/Structural Heart franchise through clinical and educational customer needs assessment, product and procedural training, live case coverage, and assist with customer follow-up for ongoing clinical support as needed. Maintain and develop expertise on the Coronary/Structural Heart Interventional product portfolio related to the specific clinical specialty area and expertise. Identify and expand the customer base through professional networking, consultation related to best practices and the appropriate clinical use of Teleflex products, and timely professional follow-up. Support Coronary/Structural Heart educational programs with aligned educational goals and needs of the Interventional Business Unit. Support scientific exchanges of information with medical societies. Pre-conference & in-booth educational programs, meetings with scientific committees, education grant support, and research submissions (in collaboration with the Global Research & Scientific Services team). Off-label support for Teleflex products in accordance with Teleflex policy & local legal regulations

Manage utilization of HCPs in accordance with Teleflex IPPs. Coordinate efforts between cross-functional partners, including Medical Affairs, Global Research & Scientific Services, marketing, and R&D. Coordinate, participate, and manage educational, scientific activities at identified local, regional, and national trade shows/exhibitions. Serve as part of the CMA clinical expert team on product applications and troubleshooting when interfacing with SBU Leadership, Clinical Sales Specialists, and Teleflex team members. Participate as a clinical expert on project teams, committees, and in meetings with various corporate departments to provide guidance as to the clinical perspectives for the Coronary/Structural franchise. Build and support infrastructure for speaker programs supporting Teleflex Academy, webinars, training content, and programs. Coordinate and participate in content development and review of education material as needed by IA BU or CMA. Manage all business-associated administrative tasks and responsibilities to support job-related activities, to include strict adherence to the Teleflex Medical T&E policies and procedures, timely filing of required and/or requested reports, and documentation of activities via approved documents and forms. Adhere to applicable Teleflex IPPs, Teleflex Code of Ethics, and all Company policies, rules, procedures, and housekeeping standards.

Bachelor's degree is required, preferably in clinical, biology, health sciences, or engineering. Procedural experience within Interventional Cardiology and/or Structural Heart Possess a minimum of five years' clinical exposure in the medical field in the Cardiology environment. Medical Device industry supporting Clinical and Medical Affairs, strongly preferred. Proficient in Microsoft Word, Excel, and PowerPoint required; SalesForce experience preferred.

*Securian Financial Groups internal position title isEngineering Senior Analyst. It is eligible to be hired at the Senior Analyst or Consultant levels depending on the skills, experience, and qualifications of the candidate.

Position Summary:

Securian Financial is seeking a motivated Financial Systems Engineer to join our Financial Product Ecosystem (FPE) team, where you'll help shape the future of the enterprise-wide SAP financial system. In this hybrid role, you'll collaborate with cross-functional teams to define requirements, enhance systems, and drive innovation in an agile environment. Ideal for someone with a background in software development and a passion for continuous learning, this position offers the opportunity to grow expertise in SAP technologies while making a tangible impact on financial operations and decision-making.

Responsibilities include but not limited to:

Product & Stakeholder Collaboration

• Partner with Product Owners, System Architects, and business stakeholders to define user stories and deliver effective solutions in an agile environment.
• Own and manage incoming projects, ensuring alignment with business goals and timelines.

System Enhancement & Support

• Lead enhancements and troubleshoot issues across the SAP ecosystem.
• Support batch process resolution, including job setup, updates, and root cause analysis. This includes participation in an overnight on-call rotation quarterly for a total of approximately 2-3 weeks a quarter, supported by a collaborative team structure.

Quality & Documentation

• Ensure deliverables are testable, well-documented, and meet the needs of both technical and non-technical audiences.
• Assist with audit and security activities to maintain data integrity and compliance.

Technology Leadership & Learning

• Serve as a technical thought leader for current and future solutions, driving adoption and innovation as well as bridging the gap between technical work and business functional knowledge.
• Build expertise in SAP technologies including:
• Core SAP Tools: ABAP and FPSL (Financial Product Sub-Ledger)
• Programming & Integration: Java, Python, REST, SOAP, ABAP, HANA SDI
• Scheduling & Reporting: Control-M, SAP Fiori Tiles

Continuous Improvement

• Stay ahead of evolving technologies and proactively identify opportunities to improve system performance and user experience.

Qualifications:

• Previous experience working with financial systems such as SAP.
• Hands-on software development experience, including configuring and debugging enterprise applications using technologies such as Java, Python, REST, and SOAP.
• Familiarity with platforms such as AWS, ABAP, and HANA SDI, with a demonstrated ability to quickly ramp up in new tools.
• Strategic and analytical thinker with strong creative problem-solving skills and attention to detail.
• Experienced in agile methodologies with the ability to adapt to shifting priorities and manage multiple tasks under pressure.
• Advanced communication, facilitation, and interpersonal skills to engage diverse stakeholders and lead discussions effectively.
  

Preferred Qualifications:

• 3-6 years of experience as an engineering or product analyst, with a proven track record of delivering measurable business outcomes.
• Hands-on experience with SAP modules such as ABAP and FPSL.
• Bachelor's degree in Computer Science, Finance, Business, or a related field.
• Proficient in Control-M for batch scheduling and SAP Fiori Tiles for operational reporting.
• Strong understanding of batch processing, auditing practices, and financial/operational reporting workflows.
• Proven ability to communicate effectively with customers and stakeholders to ensure alignment with business goals.
  

#LI-Hybrid**This position willhave a hybrid working arrangement, workingin-officefor a minimum of3days aweek.**

Securian Financial believes in hybrid work as an integral part of our culture. Associates get the benefit of working both virtually and in our offices. Ifyou'reina commutable distance (90 minutes)you'lljoin us 3 days each week in our offices to collaborate and build relationships. Our policy allows flexibility for the reality of business and personal schedules.

The estimated base pay range for this job is:

Pay may vary depending on job-related factors and individual experience, skills, knowledge, etc. More information on base pay and incentive pay (if applicable) can be discussed with a member of the Securian Financial Talent Acquisition team.

Be you. With us. At Securian Financial, we understand that attracting top talent means offering more than just a job - it means providing a rewarding and fulfilling career. As a valued member of our high-performing team, we want you to connect with your work, your relationships and your community. Enjoy our comprehensive range of benefits designed to enhance your professional growth, well-being and work-life balance, including the advantages listed here:

Paid time off:

• We want you to take time off for what matters most to you. Our PTO program provides flexibility for associates to take meaningful time away from work to relax, recharge and spend time doing what's important to them. And Securian Financial rewards associates for their service by providing additional PTO the longer you stay at Securian.

• Leave programs: Securian's flexible leave programs allow time off from work for parental leave, caregiver leave for family members, bereavement and military leave.

• Holidays: Securian provides nine company paid holidays.

Company-funded pension plan and a 401(k) retirement plan: Share in the success of our company. Securian's 401(k) company contribution is tied to our performance up to 10 percent of eligible earnings, with a target of 5 percent. The amount is based on company results compared to goals related to earnings, sales and service.

Health insurance: From the first day of employment, associates and their eligible family members - including spouses, domestic partners and children - are eligible for medical, dental and vision coverage.

Volunteer time: We know the importance of community. Through company-sponsored events, volunteer paid time off, a dollar-for-dollar matching gift program and more, we encourage you to support organizations important to you.

Associate Resource Groups: Build connections, be yourself and develop meaningful relationships at work through associate-led ARGs. Dedicated groups focus on a variety of interests and affinities, including:

• Mental Wellness and Disability

• Pride at Securian Financial

• Securian Young Professionals Network

• Securian Multicultural Network

• Securian Women and Allies Network

• Servicemember Associate Resource Group

For more information regarding Securian's benefits, please review our Benefits page.

This information is not intended to explain all the provisions of coverage available under these plans. In all cases, the plan document dictates coverage and provisions.

Securian Financial Group, Inc. does not discriminate based on race, color, religion, national origin, sex, gender, gender identity, sexual orientation, age, marital or familial status, pregnancy, disability, genetic information, political affiliation, veteran status, status in regard to public assistance or any other protected status. If you are a job seeker with a disability and require an accommodation to apply for one of our jobs, please contact us by email at , by telephone (voice), or 711 (Relay/TTY).

To view our privacy statement click here

To view our legal statement click here