Engineering Structures Jobs No Experience Jobs in Wethersfield, CT

Knows, understands, incorporates, and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users and Clinical Engineering Management of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost-effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines) to order parts and supplies required for emergency service or repair of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

Associates of Applied Sciences degree in medical electronics, electronic technology or related field, including comparable military training or an equivalent combination of education and experience. CBET certification preferred.

Three (3) to five (5) or more years' experience performing corrective and planned maintenance on medical devices and/or clinical equipment.

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and test equipment specific to the field.  Ability to train CE associates on use and application of test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

Must be able to adapt to frequently changing work priorities.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and Clinical Engineering.

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to follow complex written instructions, perform tasks and document actions taken.

Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes.

Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service to general and various specialized diagnostic and therapeutic medical equipment, as assigned by the Clinical Engineering (CE) Manager.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users, CE Managers, and Regional Director of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines)  to order parts and supplies required for emergency service or repair  of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

Associates of Applied Sciences degree in medical electronics, electronic technology or related field, including comparable military training or an equivalent combination of education and experience. CBET certification preferred.

Three (3) to five (5) years' experience  performing corrective and planned maintenance on medical devices and/or clinical support equipment. 

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and  test equipment specific to the field.  Ability to train CE associates  on use and application of select test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and  Clinical Engineering. 

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to follow complex written instructions, perform tasks and document actions taken.

 Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes. .

Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Position:

The Engineering Project Manager will report directly to the PMO Manager and will be responsible for leading and managing assigned NPI Projects from project initiation through production hand-off.

Key Goals:

The EPM goal when managing projects is to meet or exceed internal and external customer expectations while maintaining the scope, quality and any costs associated with the project. The Engineering Project Manager will oversee and manage the activities of multiple projects involving contracted component/assembly processes, equipment/tooling builds, and plant layout tasks that support all three AVNA facilities.

Responsibilities:

• The EPM will facilitate communication between the customer and the internal project team. The EPM will guide contractual conversations, technical conversations, and production conversations.
• The EPM manages activities for cross-functional team members that include Manufacturing Engineers, Quality Engineers, Automation Engineers, Toolmakers/technicians, Maintenance, product supervisors, estimating/quoting/sales, Buyers/Planners, outside vendors, etc.
• Develops and maintains multi-phase project plans and timelines while adhering to scope, quality and project costs. Any milestone dates, risks, or failures must be clearly communicated to the customer in a timely manner.
• Identifies project risks and addresses accordingly during all stages of the project. The EPM must understand the use of technical and financial information from past projects and the experience of subject matter experts.
• The EPM will collaborate with a multi-functional team to resolve technical challenges. The EPM will assist with troubleshooting, data analysis and in-depth evaluation of the process, equipment or tooling when needed.
• Oversees all project operation rate variants as it relates to gross profit margins. The EPM alters/improves processes with the technical lead during the NPI stage as it relates to cost, efficiency or quality.
• Works with outside suppliers to develop or confirm material, component or assembly processes.
• Works with outside vendors for gages, tooling, equipment or services that are required within the project plan or capital expense.
• Technical writing will be owned by the EPM such as IQ/OQ/PQ protocols and reports. The EPM must ensure other technical documents are correctly completed during the specified project phase per any phase gates.
• Convey meeting minutes with specific actions/timing for all internal and external meetings that are led by the EPM.

Requirements:

• 5+ years of project management experience as an engineer or project manager, preferably in the medical device industry.
• Hands-on technical support in the Berlin, CT facility and New Britain, CT facility is required.
• Formal project management training (PMP certified) is preferred.
• Skilled in a project management software product (Smartsheet preferred)
• Engineering skills or technical skills surrounding manufacturing: Tooling design, metal stamping/milling/turning/grinding, injection molding, laser processing, assembly processes.
• Skilled in a 3D CAD software (Solidworks preferred) and 2D CAD software (AutoCAD or Draftsite preferred).
• Experience with PPAP (production part approval process) is preferred.
• Must be able to interpret technical drawings, product requirements and design specifications.
• Understanding of lean manufacturing/six sigma and trained in a statistical software for MSAs and Capability studies (green belt certification and Minitab preferred, respectively)
• Outstanding verbal and written communication skills for different cross-function team members and customer interface.
• Ability to self-educate and learn new processes
• ISO13845 experience is recommended

*This is an on-site role based in East Haven, CT. Candidates must live within commuting distance and be authorized to work in the U.S.*

Summary:

Town Fair Tire is seeking a highly motivated Quality Assurance Tester to join a mid-sized team of

Software Developers, Data Scientists & Network Admins. The Tester’s primary role is to ensure the stability and integrity of in-house proprietary Software. Ideal candidate must have 4+ years of

experience in Manual Testing on web based applications. Testers will also be involved in software

deployment processes. This position also offers an entry level opportunity for learning or improving skills with Automation Testing utilizing Gherkin syntax on a C# codebase.

Duties and Responsibilities:

 Test in-house proprietary Software for defects

 Use of Visual Studio and proprietary tools for code deployments

 Assist in creation, maintenance, and regular execution of Gherkin based Automation Scripts

coded in C#

 Drive assigned tasks to completion with minimal oversight

 Raise concerns or issues as early in the SDLC as possible

 Contribute insight on user experience concerns or ideas

 Communicate with developers and Project Owners to ensure functional and user requirements

are being met

 Document functional defects thoroughly using bug tracking and task management tools (Wrike)

 Collaborate with end users to collect data on reported defects or concerns

 Assist in all testing processes involving the migration and integration of new and legacy

technologies

 Participate in the identification and implementation of continuous improvement in process and

standards for the entire team

Requirements:

To be considered for this job, candidates may be required to have the following skills and

experience:

 4+ years experience in Manual Software testing

 Knowledge of quality assurance, software testing principles and practices, and understanding of

SDLC

 Experience with testing across a range of application types, including web, mobile and desktop

 Strong ability to identify, analyze, and resolve issues in collaboration with Product Owners and

Developers, including verification of implemented fixes

 The ability to self-manage deliverables and communicate concerns

 Display ownership and autonomy to work on tasks and be pro-active in managing it end to end

 Excellent team building skills, including cross-functional team building

 Participate in requirement analysis to understand specifications and user stories

 Familiarity with Gherkin automation test architecture

 Familiarity with SQL database structures and use

 Familiarity using software Version Control application Git

Personal Attributes:

 Demonstrate a personal passion for delivering Top Quality product results

 Proactive attitude toward improving and optimizing existing and future systems

 Enthusiasm for learning new tools and methodologies

 Strong interpersonal, written, and oral communication skills

 Able to conduct research into software issues and products as required

 Ability to present ideas in user-friendly language

 Highly self-motivated and directed, with keen attention to detail

 Proven analytical and problem-solving abilities

 Able to effectively prioritize tasks in a high-pressure environment

 Strong customer service orientation

 Experience working in a team-oriented, collaborative environment

No CDL needed / No commercial drivers licenseWhy Deliver with Door Dash?Door Dash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.

As a Dasher, you'll stay busy with a variety of earnings opportunities and can work when it works for you.

Whether you're looking for a side hustle or a full-time gig, delivering with Door Dash gives you the opportunity to earn extra cash on your terms.Multiple ways to earn: Whether you're delivering meals, groceries, or retail orders, Door Dash offers diverse earning opportunities so you can maximize your time.

Total flexibility: Dash when it works for you.

Set your own hours and work as much—or as little—as you want.

Know how much you'll make: Clear and concise pay model lets you know the minimum amount you will make before accepting any offer.

Instant cash flow: Get paid the same day you dash with Door Dash Crimson
*.

No deposit fees, no waiting.

Quick and easy start: Sign up in minutes and get on the road fast.
**Simple Process: Just pick up, drop off, and cash out.

Payday is in your back pocket.

Basic RequirementsNo CDL / commercial drivers license needed18+ years old
*** (21+ to deliver alcohol)Any car, scooter, or bicycle (in select cities)Driver's license numberSocial security number (only in the US)Consistent access to a smartphone How to Sign UpClick "Apply Now" and complete the sign up processDownload the Door Dash Dasher app and go
*Subject to eligibility requirements and successful ID verification.

The Door Dash Crimson Deposit Account is established by Starion Bank, Member FDIC.

The Door Dash Crimson Visa Debit Card is issued by Starion Bank.
**Subject to eligibility.

Insurance Sales Specialist

Take Control of Your Career Today

We are looking for motivated, disciplined and goal-driven individuals to join our high-performing insurance sales team! Whether you’re an experienced sales professional or looking for a rewarding career change, we provide everything you need to succeed—leads, training, mentorship, and an unmatched commission structure.

Why Join Us?

No Cold Calling – Leverage our unique platform that targets qualified candidates seeking our diverse life insurance products, allowing you to focus more on client interactions and less on lead hunting.

Flexible Schedule – Work remotely, in person, or a combination of both. You decide!

Unlimited Earning Potential – Competitive compensation with the most attractive commission and bonus structure in the industry and residual income on renewals.

Comprehensive Training – We provide the tools, scripts, and mentorship to help you close deals quickly as well as a supportive team environment with access to seasoned mentors.

Career Growth – Advancement opportunities based on performance, not tenure.

What You’ll Do:

Get Licensed!- Must have or be willing to obtain a life insurance license (we provide guidance and support to help you get licensed).

Meet with Clients – Perform comprehensive needs assessments to understand clients' financial goals and insurance needs, presenting and explaining life insurance options to help clients make informed decisions.

Present Tailored Solutions – Deliver captivating sales presentations to individuals and groups, showcasing the benefits and features of our life insurance products.

Close Sales & Earn Big – Guide clients through the application process and celebrate each win!

Build Long-Term Relationships – Cultivate and maintain long-term relationships with clients, offering continuous support and service. Conduct regular follow-ups to ensure customer satisfaction and policy retention.

Stay Informed – Stay up to date on industry trends, competitive products, and market conditions. Utilize this knowledge to position our life insurance products effectively and provide clients with pertinent information.

What You Need to Succeed:

Strong communication and persuasive sales skills

Self-motivated and goal-oriented mindset

Ability to work independently and manage your own schedule

No experience required – we’ll help you get licensed if you’re not already!

Valid driver’s license & reliable transportation (for in-person meetings)

Compensation & Perks:

High commission structure with monthly bonuses

Residual income paid annually on policy renewals

Comprehensive training and continuous professional development.

Fast-track promotion opportunities

We are currently have a limited number of training positions available to support our Capital Region Education Council (CREC) contract in Connecticut. We have CREC trainee openings at our Plainville, New Britain, South Windsor, Portland and Cheshire locations. Location availability is limited and so we encourage you to apply early to secure a route at your preferred location.
 

As a CREC School Bus Driver, you will have a vital role within your local community by helping get our kids to school safely. This is a perfect role for retirees, parents, grandparents, career changers, experienced drivers and anyone that cares about children.

Hear what it's like from a DATTCO school bus driver:

DATTCO is a third-generation, family-owned passenger transportation company that serves 30 school districts throughout Connecticut and Rhode Island. Our 2,500 employees safely transport over 140,000 students to and from school every year. Learn more about us at  

What We Offer:

• No experience? No worries! We provide personalized training.
• Part-time work schedule of 20-30 hours per week. Additional hours may be available.
• Bring Your Child to Work Program. Save on child care.
• No long distance trips. Be home every night.
• Weekend and holiday breaks.
• 401k with company match.
• Career growth opportunities. We promote from within.
• Paid holidays.
• Annual pay raises.
• Employee referral bonuses.
• 20-hour guarantee per week.
• Paid safety meetings.
• Compensation of $25.00-31.50/hour.

Responsibilities:

• Safely transport children to and from school.
• Perform pre-trip and post-trip vehicle inspections.

Requirements:

• 21+ years old.
• Valid CT driver's license.
• 3 years driving experience.
• Pass a background check. Pass a drug test.

Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status and any other protected classes.

Required qualifications:

• Legally authorized to work in the United States
• 21+ years or older
• Valid driver's license
• Background check
• Motor Vehicle Report (MVR) Review
• Drug screening

Want to make extra money on YOUR schedule? Join our exclusive list of research study participants and start earning extra income today! Perfect for anyone seeking remote, part-time, or temporary work, these opportunities require no previous experience and offer unmatched flexibility. Choose the studies that suit you best—whether online, in-person, or over the phone—and get paid for sharing your opinions. Don't miss out on this chance to turn your free time into valuable earnings! Sign up now and take control of your work-life balance.

• Health Issues (Research for cures and new medications to treat ailments)
• Consumer Products (Your experience with consumer products)
• Shopping (Shopping experiences)
• Internet Usage (How you use the internet)
• Vehicles (recreational vehicles and automobiles)
• Employment (Various types of jobs or career fields)
• Food & Beverages (the consumption of various foods and bevera ges)
• Entertainment (About TV, movies or video games)
• Social Media (the use of different social media platforms)
• Financial (Banking and investing)
• Retirement (Planning what, when and how)
• Gender (studies based on your gender)
• Housing (Renters or Homeowners)

• Earn up to $250+ in Just ONE Hour! (Focus Group Session)
• Earn up to $3,000+ (Multi-Session Studies)

• Flexibility to take part in discussions online or in-person.
• No commute needed if you choose to work from home.
• No minimum hours. You can do this part-time or full-time
• Enjoy free samples from our sponsors and partners in exchange for your honest feedback of their products.
• You get to review and use new products or services before they are launched to the public.

• Speak and/or read English
• Must be 18yrs old or older
• Must have either a phone, computer or tablet with internet connection

• Start Immediately - No Experience Needed! Anyone Can Participate!

• Open to all education levels - Your opinion matters!