Engineering Structures Jobs Full Time Jobs in San Pedro, CA

Engineering Supervisor

Location: Torrance, CA

Overview

This role supports a high-precision aerospace manufacturing organization known for craftsmanship, quality, and continuous improvement. The Engineering Supervisor works cross-functionally with Manufacturing Engineering, NC Programming, Quality, and Operations to improve processes, integrate new programs, and ensure consistent, compliant production. This leader plays a critical role in mentoring engineers, supporting new product introductions, and resolving manufacturing challenges that impact quality, delivery, and profitability.

The ideal candidate is a hands-on technical leader who thrives in a fast-paced manufacturing environment, values process discipline, and brings a problem-solving mindset to complex production challenges.

Position Responsibilities

• Serve as a key manufacturing engineering representative for new statements of work, new product integration, and process transitions.
• Ensure adherence to internal engineering and manufacturing standards; develop and implement new standards where needed.
• Collaborate with NC Programming, Operations, and Manufacturing Engineering on tooling and fixture design.
• Lead and support first-article and first-piece reviews alongside Quality, Engineering, Operations, and NC Programming.
• Mentor, train, and support the development of Manufacturing Engineers and Planners.
• Interface with customers as needed to resolve engineering or producibility issues.
• Investigate and resolve manufacturing issues related to scrap, rework, or low profitability.
• Support estimating and quoting efforts by reviewing designs for manufacturability and risk.
• Provide shop-floor engineering support during first-article builds and process validation.
• Plan, direct, and coordinate technical activities while monitoring performance against budgets, schedules, and organizational goals.
• Play a strong leadership role in New Product Introduction (NPI) initiatives.
• Perform additional duties as assigned.

Core Functional Areas

Process Standardization

• Develop and maintain work instructions, procedures, and manufacturing standards.
• Recommend and implement process improvements to enhance cost, quality, and delivery.
• Maintain configuration control across customer part revisions and specifications.
• Manage Engineering Work Orders (EWO) and Engineering Change Orders (ECO), including:
• New part integration
• Tooling changes
• Part number and revision control
• Value engineering initiatives

Continuous Improvement

• Identify improvement opportunities and drive corrective actions.
• Analyze manufacturing data to evaluate performance and resolve problems.
• Apply Lean Manufacturing tools and principles where applicable.

Project Management

• Develop and manage project schedules using MS Project or similar tools.
• Track progress, communicate expectations, and manage activities to budget and schedule.

Leadership & Communication

• Provide regular updates to leadership on project status and engineering initiatives.
• Deliver clear, organized, and effective presentations when required.
• Communicate complex or sensitive information professionally and tactfully.
• Foster collaboration across engineering, operations, and support functions.
• Motivate teams, manage conflict, and promote effective cross-functional communication.

DMF Lighting is a fast-growing leader in the lighting industry, always hard at work engineering what comes next. We have an exciting opportunity in our engineering department for an Engineering Technician.

This role is onsite in Carson, CA.

Job Description:

• Support the Electrical Engineering team in the design and qualification of compact LED lighting systems incorporating switch mode power supplies and associated control and communication circuits.
• Execute hardware and firmware testing and report results for review.
• Build prototypes from rough sketches or plans.
• Assemble, test, and maintain circuitry or electronic components according to engineering instructions, technical manuals, and knowledge of electronics. Troubleshoot field returns, identifying root cause of problem and potential design improvements.

Requirements:

• Education: Associate's degree or technical school certification in a related field (e.g., electronics, electrical technology) is preferred.
• Experience: 1+ years of experience working with electronics in a lab, production test or quality control environment.
• Familiar with lab tools such as oscilloscopes, multimeters, thermocouples etc.
• Competent with soldering and reworking PCB prototypes.
• Hands on experience with electronics through professional experience, personal projects, or college assignments.
• Able to communicate in an effective and professional manner (written and oral)
• High level of maturity and organization with a health obsession to learn
• Experience with software and microcontrollers is a plus

Title: Trial Attorney – Personal Injury

Location: Fully Remote (California)

About The Firm:

The client is a nationally recognized personal injury law firm dedicated to advocating for individuals who have been seriously injured due to negligence. For over three decades, the firm has built a strong reputation for delivering exceptional results and compassionate representation for clients throughout California.

As the firm continues to grow, they are seeking an experienced Trial Attorney to join its litigation team. This is an exciting opportunity for a driven litigator who thrives in the courtroom and wants to handle significant personal injury cases while working remotely.

Position Overview:

The Trial Attorney will manage a caseload of complex personal injury matters and take cases through all phases of litigation, including trial. The ideal candidate is comfortable handling depositions, arguing motions, and presenting cases in front of juries.

This role offers the opportunity to work on high-value cases while collaborating with an experienced litigation team and support staff.

Responsibilities:

• Manage personal injury cases from litigation through trial
• Conduct depositions of parties, witnesses, and experts
• Draft and argue motions, including dispositive motions
• Develop case strategy and trial preparation plans
• Prepare witnesses and clients for testimony
• Represent clients in court hearings, mediations, and trials
• Collaborate with paralegals, case managers, and support staff
• Maintain strong client communication and case updates

Qualifications:

• Active license and good standing with the California State Bar
• 5+ years of personal injury litigation experience
• Trial experience strongly preferred (first or second chair)

Salary and Other Compensation:

The annual salary for this position is between [$250,000 – $300,000 annually]. Factors which may affect pay within this range may include geography/market, skills, education, experience and other qualifications of the successful candidate.

Benefits: The Company offers the following benefits for this position, subject to applicable eligibility requirements: [medical insurance] [dental insurance] [vision insurance] [401(k) retirement plan] [life insurance] [long-term disability insurance] [short-term disability insurance] [2 to 3 weeks of paid time off]

Employment Attorney – Plaintiff Side

Location: Full Remote across California

Job Description:

Our client, a fast-growing plaintiffs' employment law firm based in Los Angeles, CA, is seeking a dedicated Employment Attorney to join their dynamic team.

As part of their litigation team, you'll represent employees in individual and class action claims, including wage and hour disputes, wrongful termination, discrimination, harassment, and retaliation cases.

What You'll Do

• Handle all aspects of litigation from intake through trial or settlement
• Draft and respond to discovery
• Take and defend depositions
• Draft and argue motions, including MSJs
• Appear for hearings, mediations, and trials
• Manage client relationships with empathy and strategic guidance
• Collaborate with senior attorneys on complex class and PAGA cases

Qualifications:

• 2+ years of employment litigation experience
• Experience with wage and hour, wrongful termination, and discrimination cases
• Licensed and in good standing with the California Bar

Salary and Other Compensation:

The annual salary for this position is between [$200,000 – $300,000 annually]. Factors which may affect pay within this range may include geography/market, skills, education, experience and other qualifications of the successful candidate.

Benefits: The Company offers the following benefits for this position, subject to applicable eligibility requirements: [medical insurance] [dental insurance] [vision insurance] [401(k) retirement plan] [life insurance] [long-term disability insurance] [short-term disability insurance] [2 to 3 weeks of paid time off]

Title: Senior Employment Attorney

Location: Irvine, CA

Work Schedule: FULL REMOTE

About the client:

They are seeking an Employment Attorney to join its growing team in Irvine, CA. This role offers a remote work schedule, providing flexibility while maintaining meaningful in-office collaboration. The ideal candidate will have strong employment law experience and thrive in a fast-paced, client-focused practice.

Key Responsibilities

• Represent employees in employment law matters, including:
• Wrongful termination
• Discrimination, harassment, and retaliation claims
• Wage & hour disputes
• Leave of absence and accommodation issues
• Handle cases from inception through resolution, including:
• Drafting pleadings, motions, and discovery
• Taking and defending depositions
• Court appearances, mediations, and settlement negotiations

Qualifications:

• Active and good-standing member of the California State Bar
• 3+ years of experience practicing employment law plaintiff's (open to defense experience)
• Strong litigation and legal writing skills.

Salary and Other Compensation:

The annual salary for this position is between [$200,000 – $250,000 annually]. Factors which may affect pay within this range may include geography/market, skills, education, experience and other qualifications of the successful candidate.

Benefits: The Company offers the following benefits for this position, subject to applicable eligibility requirements: [medical insurance] [dental insurance] [vision insurance] [401(k) retirement plan] [life insurance] [long-term disability insurance] [short-term disability insurance] [2 to 3 weeks of paid time off]

For more than 30 years, QTC has been the largest provider of government-outsourced occupational health and disability examination services in the nation.

Our goal is to build strong partnerships with our network of providers that support and enhance QTCs commitment to quality, timeliness, and customer service.

Our demand is high for qualified independent physicians who can assist with delivering technology-driven examinations solutions to our customers including the Department of Veterans Affairs and California state disability board.

As an in-network physician, you will receive: A fully staffed clinic (no overhead) There's no treatment or follow-up required Flexible hours (full or part-time)

Job Title: Senior Software Engineer Slicer Manufacturing Platform Development
Department: RD
Reports to: Chief Operating Officer
Employment Type: Full-Time
FLSA Status: Exempt

The Company:
3DEO is a leader and innovator in sinter-based additive manufacturing (AM), delivering proprietary and differentiated AM solutions that drive breakthrough product performance. With some of the industrys highest-volume capabilities in metal 3D printing, 3DEO combines cutting-edge manufacturing with multi-disciplinary engineering and product development expertise.

Our patented and award-winning technology has revolutionized how customers approach design, enabling high-volume production with unmatched quality, precision, and cost efficiency. Holding roughly 20 patents, 3DEO is more than a manufacturer we are a trusted partner in solving complex challenges and unlocking the full potential of AM.

At 3DEO, we collaborate closely with customers in industries such as medical, industrial, aerospace, and semiconductors, delivering end-to-end solutions that include RD, design, engineering, prototyping, production, and beyond.

Since our founding in 2016, our greatest strength has been our team. At 3DEO, innovation is approached as a team. Together, we tackle the toughest product development challenges, helping our customers bring visionary ideas to life. Join our passionate and collaborative team at 3DEO, where were transforming whats possible in metal additive manufacturing and making what hasnt been made before.

Job Summary:
The Senior Software Engineer will contribute to the development of 3DEOs proprietary slicing engine and the end-to-end software platform that powers our metal 3D printing process. This role focuses on geometry processing, toolpath generation, and digital workflows used across our vertically integrated production system. Ideal candidates have experience building slicers, simulation tools, or manufacturing automation software and enjoy working at the intersection of software and hardware in a fast-moving RD environment.

Essential Functions:
? Develop and maintain core slicing algorithms including path planning, infill generation, and motion logic
? Implement and optimize geometry processing tools (mesh repair, offsetting, tessellation, Boolean ops)
? Contribute to the architecture of the internal production platform, including job tracking and printer interfacing
? Integrate slicing logic with upstream and downstream systems including UI, hardware control, and analytics
? Collaborate closely with mechanical, controls, and process engineers to translate physical constraints into software rules
? Write clean, well-documented, and testable code to support scalable manufacturing
? Participate in code reviews and technical design discussions

Required Qualifications:
? Strong programming skills in C++, Rust, or Python
? Experience with computational geometry, 3D data structures, or mesh processing
? Familiarity with additive manufacturing toolchains or CNC-style toolpath generation
? Ability to work in a cross-functional RD environment with hardware and process teams
? Comfortable building production-grade software in a fast-paced, iterative setting
? Experience with continuous integration (CI) pipelines, static code analysis, and unit testing

Preferred Qualifications:
? Experience with industry standard or related geometry engines/libraries
? Familiarity with motion control systems, G-code generation, or machine integration protocols
? Background in data pipelines or job tracking for manufacturing operations
? Prior work on metal additive manufacturing or CNC-based systems

Education and Experience:
? Bachelors degree in Computer Science, Software Engineering, or related technical field required
? 5+ years of experience in software development, with at least 12 years in a manufacturing, robotics, or 3D graphics setting
? Open-source contributions to slicing software or experience building AM/CAM toolchains is a plus

Physical Requirements and Work Environment:
? Primarily office/lab-based with some machine interaction
? Must be able to occasionally inspect physical parts or collaborate with operators near equipment

#SPCareers

Job Title: Senior Mechanical Engineer Industrial Machine Design Integration
Department: RD
Reports to: Director of Engineering
Employment Type: Full-Time
FLSA Status: Exempt

The Company:
3DEO is a leader and innovator in sinter-based additive manufacturing (AM), delivering proprietary and differentiated AM solutions that drive breakthrough product performance. With some of the industrys highest-volume capabilities in metal 3D printing, 3DEO combines cutting-edge manufacturing with multi-disciplinary engineering and product development expertise.

Our patented and award-winning technology has revolutionized how customers approach design, enabling high-volume production with unmatched quality, precision, and cost efficiency. Holding roughly 20 patents, 3DEO is more than a manufacturer we are a trusted partner in solving complex challenges and unlocking the full potential of AM.

At 3DEO, we collaborate closely with customers in industries such as medical, industrial, aerospace, and semiconductors, delivering end-to-end solutions that include RD, design, engineering, prototyping, production, and beyond.

Since our founding in 2016, our greatest strength has been our team. At 3DEO, innovation is approached as a team. Together, we tackle the toughest product development challenges, helping our customers bring visionary ideas to life. Join our passionate and collaborative team at 3DEO, where were transforming whats possible in metal additive manufacturing and making what hasnt been made before.

Job Summary:
The Senior Mechanical Engineer is responsible for designing and integrating custom industrial machines from concept through deployment. This hands-on role supports the development of next-generation powder-metal 3D printers built on a CNC platform, requiring deep experience with motion systems, electromechanical assemblies, and machine-level integration. The ideal candidate has built machinesnot just modeled componentsand is fluent in sourcing, assembly, and system-level mechanical design.

Essential Functions:
? Redesign and upgrade existing 3D printing systems, replacing prototype components with production-grade machined parts to support long-term scalability and manufacturing readiness.
? Specify, select, and integrate motion control systems including stepper motors, extended motion axes, recoating mechanisms, spindles, and linear guides.
? Modify and expand build chamber designs, including sealing and controlled access systems to enable inert gas environments.
? Incorporate cosmetic design elements as provided by external industrial design partners.
? Develop and implement new mechanical processes, technical solutions, and machine features to support ongoing hardware development initiatives.
? Collaborate closely with electrical, software, and controls engineers to ensure complete system integration.
? Lead prototype builds, mechanical testing, debugging, and iterative design improvements.
? Support design transfer to manufacturing and provide production support for deployed systems.
? Maintain complete design documentation including BOMs, mechanical drawings, and revision histories.

Required Qualifications:
? Proficiency with SolidWorks or similar CAD software, including assemblies, tolerancing, and CNC-ready design
? Strong understanding of motion components, linear guides, actuation, and mechanical fasteners
? Proven ability to build and integrate electromechanical systems in a lab or production environment
? Hands-on experience sourcing components
? Effective collaboration with cross-functional teams in a fast-paced RD setting

Preferred Qualifications:
? Experience designing sealed systems, gas enclosures, or powder-handling equipment
? Field installation, debug, or customer training experience

Education and Experience:
? Bachelors degree in Mechanical Engineering or a related field required
? Minimum of 6 years of experience in mechanical design, machine development, or automation
? Masters degree preferred but not required

Physical Requirements and Work Environment:
? Regularly works in an engineering lab and machine build environment
? Must be able to sit, stand, and perform hands-on work at machines and workbenches
? Occasionally required to lift and move up to 50 pounds

#SPCareers

We are seeking a motivated and experienced, Tungsten Inert Gas (TIG) Welder to join our aerospace manufacturing team. This position is ideal for individuals who have experience and are eager to grow within a structured and supportive environment. You will assist in the welding, fabrication, and assembly of propellant space tank systems and sub-assemblies.

Pay Range: $40 to $60 per hour.

• Weld, assemble, and fabricate various propellant space tank systems and sub-assembly components using GTAW (TIG) welding methods
• Use precision-calibrated tools such as torque wrenches, micrometers, and calipers to ensure quality and accuracy
• Perform work in accordance with detailed procedures, specifications, and test instructions
• Read and interpret technical drawings and manufacturing work instructions
• Utilize various mechanical tools and equipment with minimal supervision
• Operate forklifts, overhead cranes, and other heavy equipment safely
• Perform surface preparation processes such as blending, filing, and abrading of flight hardware
• Maintain a clean and organized workspace, ensuring compliance with safety standards
• Support team members with additional duties as required to ensure efficient operations

Qualifications:

• Minimum 5 years of aerospace welding experience
• High school diploma or GED required
• Technical training or certification in TIG welding
• Understanding of GTAW techniques and material weldability
• Ability to read blueprints or technical drawings
• Willingness to learn and follow precise instructions and procedures
• Strong attention to detail and pride in workmanship
• Ability to work well in a team and communicate effectively
• Comfortable working with hand tools and shop equipment
• Forklift or crane certification is a plus

Work Environment:

• Aerospace clean room and shop environment
• Exposure to high-precision components and tight tolerances
• Regular lifting of up to 50 lbs and standing for extended periods

This position is currently accepting applications.

Apply Now