Engineering Structures Impact Factor Jobs in New York

POSITION PURPOSE

Assists Clinical Engineering Manager in planning, developing, and implementing the medical equipment management program utilizing an equipment life cycle approach.  Coordinates planned and corrective maintenance of diagnostic and therapeutic medical equipment used throughout the hospital.  Ensures continuous improvement in quality, operational cost effectiveness, customer satisfaction and resource utilization.  Supports and fosters team building within the local and corporate clinical engineering team.  As needed, provides Planned Maintenance (PM) safety testing, repairs, calibration, installation, routine and emergency service, to general and various specialized diagnostic, therapeutic, and support medical equipment, such as anesthesia machines, sterilizers, ventilators, ultrasound, laser, laboratory, etc., as assigned by the Clinical Engineering (CE) Manager. 
 

ESSENTIAL FUNCTIONS

1.    Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions. 

2.    Maintains a working knowledge of applicable federal, state and local laws, regulations and industry standards.  Complies with Trinity Health’s Organizational Integrity Program, Standards of Conduct, as well as other policies and procedures in order to ensure adherence in a manner that reflects ethical and professional integrity. 

3.    Completes corrective and planned maintenance work order documentation.

4.    Analyzes and prepares reports on program effectiveness and operating cost.

5.    Assists in implementing the medical equipment management program utilizing an equipment life cycle approach.  Meets target objectives and standards for program timeliness and quality.

6.    Promotes teamwork by keeping others informed, participating effectively in group decision making, while working to accomplish team objectives and projects, and by soliciting feedback about one's effectiveness as a team member and leader.

7.    Performs PM procedures on multiple types of general and specialized clinical equipment. 

8.    Monitors CE Department PM completion rates during each monthly scheduled cycle and reports results to Clinical Engineering Manager.

9.    Performs corrective maintenance procedures including diagnosing problems using, thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and document results of activities performed to comply with all regulatory and standard requirements. 

10.    Performs PM procedures using manufactures' recommendations, standards or code requirements, as well as industry acceptable processes and guidelines.

11.    Notifies equipment users and CE Manager of repair status or delays as necessary. 

12.    Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to the hospital departments.   

13.    Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines. 

14.    Participates in various hospital committees as assigned, such as laser safety, risk management, and safety/EOC committees as assigned by CE Manager.

15.    Continually improves processes by seeking ways to eliminate and reduce waste.

16.    Has authority (based on department guidelines)  to order parts and supplies required for emergency service or repair  of medical equipment. Recommend test equipment and spare equipment parts to the CE Manager.

17.    Provide on-call service coverage after normal business hours on a rotating basis as assigned.

18.     Provide assistance and training to all Bio-Medical Equipment Techs as assigned.

19.     Functions as Clinical Engineering representative in the absence of the CE Manager.

20.    Performs other duties as assigned or requested by CE Manager.

MINIMUM QUALIFICATIONS

1.    Minimum of an Associates of Applied Sciences Degree in related field of medical electronics, electronic technology or equivalent military related training required.  CBET, CLET, or CRES certification preferred.

2.    Five or more years experience or equivalent performing corrective and planned  maintenance on medical  devices and/or clinical support equipment. 

3.    Must have a basic understanding of anatomy, physiology, and medical terminology.

4.    Working knowledge and ability to use basic hand tools and test equipment specific to the field.  Ability to train CE  associates on  use and application of test equipment.

5.    Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repairs.

6.    Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and Clinical Engineering.

7.    Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

8.    Must have basic understanding of personal computer operation, applications and ability to input data using keyboard.  Technician must be able to  follow complex written instructions, perform tasks and document actions taken.

9.    Strong customer service and communications skills are required to interact with hospital  personnel and vendors to achieve positive outcomes. 

10.    Maintain up to date understanding of The Joint Commission and NFPA standards as well as state and federal regulations.

11.    Ability to provide or coordinate in-service training to clinical/professional staff on medical device  operations and safety functions.

PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS

1.    Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

2.    Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

3.    Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices.  

4.    Must be able to hear speech, distinguish sounds, and speak.

5.    Must have near vision, far vision, depth perception, and be able to distinguish colors.

6.    Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

7.    Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds. 

8.    Must be able to push or pull over 100 pounds frequently (20% of the time).

9.      Maintains  safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to  job duties.

10.    Must be able to adapt to frequently changing work priorities.

11.    Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Compensation:

Pay Range: $36.34-54.51 per hour

Actual compensation will fall within the range but may vary based on factors such as experience, qualifications, education, location, licensure, certification requirements, and comparisons to colleagues in similar roles.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

POSITION PURPOSE

Assists Clinical Engineering Manager in planning, developing, and implementing the medical equipment management program utilizing an equipment life cycle approach.  Coordinates planned and corrective maintenance of diagnostic and therapeutic medical equipment used throughout the hospital.  Ensures continuous improvement in quality, operational cost effectiveness, customer satisfaction and resource utilization.  Supports and fosters team building within the local and corporate clinical engineering team.  As needed, provides Planned Maintenance (PM) safety testing, repairs, calibration, installation, routine and emergency service, to general and various specialized diagnostic, therapeutic, and support medical equipment, such as anesthesia machines, sterilizers, ventilators, ultrasound, laser, laboratory, etc., as assigned by the Clinical Engineering (CE) Manager. 
 

ESSENTIAL FUNCTIONS

1.    Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions. 

2.    Maintains a working knowledge of applicable federal, state and local laws, regulations and industry standards.  Complies with Trinity Health’s Organizational Integrity Program, Standards of Conduct, as well as other policies and procedures in order to ensure adherence in a manner that reflects ethical and professional integrity. 

3.    Completes corrective and planned maintenance work order documentation.

4.    Analyzes and prepares reports on program effectiveness and operating cost.

5.    Assists in implementing the medical equipment management program utilizing an equipment life cycle approach.  Meets target objectives and standards for program timeliness and quality.

6.    Promotes teamwork by keeping others informed, participating effectively in group decision making, while working to accomplish team objectives and projects, and by soliciting feedback about one's effectiveness as a team member and leader.

7.    Performs PM procedures on multiple types of general and specialized clinical equipment. 

8.    Monitors CE Department PM completion rates during each monthly scheduled cycle and reports results to Clinical Engineering Manager.

9.    Performs corrective maintenance procedures including diagnosing problems using, thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and document results of activities performed to comply with all regulatory and standard requirements. 

10.    Performs PM procedures using manufactures' recommendations, standards or code requirements, as well as industry acceptable processes and guidelines.

11.    Notifies equipment users and CE Manager of repair status or delays as necessary. 

12.    Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to the hospital departments.   

13.    Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines. 

14.    Participates in various hospital committees as assigned, such as laser safety, risk management, and safety/EOC committees as assigned by CE Manager.

15.    Continually improves processes by seeking ways to eliminate and reduce waste.

16.    Has authority (based on department guidelines)  to order parts and supplies required for emergency service or repair  of medical equipment. Recommend test equipment and spare equipment parts to the CE Manager.

17.    Provide on-call service coverage after normal business hours on a rotating basis as assigned.

18.     Provide assistance and training to all Bio-Medical Equipment Techs as assigned.

19.     Functions as Clinical Engineering representative in the absence of the CE Manager.

20.    Performs other duties as assigned or requested by CE Manager.

MINIMUM QUALIFICATIONS

1.    Minimum of an Associates of Applied Sciences Degree in related field of medical electronics, electronic technology or equivalent military related training required.  CBET, CLET, or CRES certification preferred.

2.    Five or more years experience or equivalent performing corrective and planned  maintenance on medical  devices and/or clinical support equipment. 

3.    Must have a basic understanding of anatomy, physiology, and medical terminology.

4.    Working knowledge and ability to use basic hand tools and test equipment specific to the field.  Ability to train CE  associates on  use and application of test equipment.

5.    Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repairs.

6.    Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and Clinical Engineering.

7.    Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

8.    Must have basic understanding of personal computer operation, applications and ability to input data using keyboard.  Technician must be able to  follow complex written instructions, perform tasks and document actions taken.

9.    Strong customer service and communications skills are required to interact with hospital  personnel and vendors to achieve positive outcomes. 

10.    Maintain up to date understanding of The Joint Commission and NFPA standards as well as state and federal regulations.

11.    Ability to provide or coordinate in-service training to clinical/professional staff on medical device  operations and safety functions.

PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS

1.    Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

2.    Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

3.    Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices.  

4.    Must be able to hear speech, distinguish sounds, and speak.

5.    Must have near vision, far vision, depth perception, and be able to distinguish colors.

6.    Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

7.    Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds. 

8.    Must be able to push or pull over 100 pounds frequently (20% of the time).

9.      Maintains  safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to  job duties.

10.    Must be able to adapt to frequently changing work priorities.

11.    Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Compensation:

Pay Range: $36.34-54.51 per hour

Actual compensation will fall within the range but may vary based on factors such as experience, qualifications, education, location, licensure, certification requirements, and comparisons to colleagues in similar roles.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

POSITION PURPOSE

Assists Clinical Engineering Manager in planning, developing, and implementing the medical equipment management program utilizing an equipment life cycle approach.  Coordinates planned and corrective maintenance of diagnostic and therapeutic medical equipment used throughout the hospital.  Ensures continuous improvement in quality, operational cost effectiveness, customer satisfaction and resource utilization.  Supports and fosters team building within the local and corporate clinical engineering team.  As needed, provides Planned Maintenance (PM) safety testing, repairs, calibration, installation, routine and emergency service, to general and various specialized diagnostic, therapeutic, and support medical equipment, such as anesthesia machines, sterilizers, ventilators, ultrasound, laser, laboratory, etc., as assigned by the Clinical Engineering (CE) Manager. 
 

ESSENTIAL FUNCTIONS

1.    Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions. 

2.    Maintains a working knowledge of applicable federal, state and local laws, regulations and industry standards.  Complies with Trinity Health’s Organizational Integrity Program, Standards of Conduct, as well as other policies and procedures in order to ensure adherence in a manner that reflects ethical and professional integrity. 

3.    Completes corrective and planned maintenance work order documentation.

4.    Analyzes and prepares reports on program effectiveness and operating cost.

5.    Assists in implementing the medical equipment management program utilizing an equipment life cycle approach.  Meets target objectives and standards for program timeliness and quality.

6.    Promotes teamwork by keeping others informed, participating effectively in group decision making, while working to accomplish team objectives and projects, and by soliciting feedback about one's effectiveness as a team member and leader.

7.    Performs PM procedures on multiple types of general and specialized clinical equipment. 

8.    Monitors CE Department PM completion rates during each monthly scheduled cycle and reports results to Clinical Engineering Manager.

9.    Performs corrective maintenance procedures including diagnosing problems using, thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and document results of activities performed to comply with all regulatory and standard requirements. 

10.    Performs PM procedures using manufactures' recommendations, standards or code requirements, as well as industry acceptable processes and guidelines.

11.    Notifies equipment users and CE Manager of repair status or delays as necessary. 

12.    Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to the hospital departments.   

13.    Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines. 

14.    Participates in various hospital committees as assigned, such as laser safety, risk management, and safety/EOC committees as assigned by CE Manager.

15.    Continually improves processes by seeking ways to eliminate and reduce waste.

16.    Has authority (based on department guidelines)  to order parts and supplies required for emergency service or repair  of medical equipment. Recommend test equipment and spare equipment parts to the CE Manager.

17.    Provide on-call service coverage after normal business hours on a rotating basis as assigned.

18.     Provide assistance and training to all Bio-Medical Equipment Techs as assigned.

19.     Functions as Clinical Engineering representative in the absence of the CE Manager.

20.    Performs other duties as assigned or requested by CE Manager.

MINIMUM QUALIFICATIONS

1.    Minimum of an Associates of Applied Sciences Degree in related field of medical electronics, electronic technology or equivalent military related training required.  CBET, CLET, or CRES certification preferred.

2.    Five or more years experience or equivalent performing corrective and planned  maintenance on medical  devices and/or clinical support equipment. 

3.    Must have a basic understanding of anatomy, physiology, and medical terminology.

4.    Working knowledge and ability to use basic hand tools and test equipment specific to the field.  Ability to train CE  associates on  use and application of test equipment.

5.    Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repairs.

6.    Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and Clinical Engineering.

7.    Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

8.    Must have basic understanding of personal computer operation, applications and ability to input data using keyboard.  Technician must be able to  follow complex written instructions, perform tasks and document actions taken.

9.    Strong customer service and communications skills are required to interact with hospital  personnel and vendors to achieve positive outcomes. 

10.    Maintain up to date understanding of The Joint Commission and NFPA standards as well as state and federal regulations.

11.    Ability to provide or coordinate in-service training to clinical/professional staff on medical device  operations and safety functions.

PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS

1.    Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

2.    Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

3.    Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices.  

4.    Must be able to hear speech, distinguish sounds, and speak.

5.    Must have near vision, far vision, depth perception, and be able to distinguish colors.

6.    Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

7.    Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds. 

8.    Must be able to push or pull over 100 pounds frequently (20% of the time).

9.      Maintains  safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to  job duties.

10.    Must be able to adapt to frequently changing work priorities.

11.    Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Compensation:

Pay Range: $36.34-54.51 per hour

Actual compensation will fall within the range but may vary based on factors such as experience, qualifications, education, location, licensure, certification requirements, and comparisons to colleagues in similar roles.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

POSITION PURPOSE

Assists Clinical Engineering Manager in planning, developing, and implementing the medical equipment management program utilizing an equipment life cycle approach.  Coordinates planned and corrective maintenance of diagnostic and therapeutic medical equipment used throughout the hospital.  Ensures continuous improvement in quality, operational cost effectiveness, customer satisfaction and resource utilization.  Supports and fosters team building within the local and corporate clinical engineering team.  As needed, provides Planned Maintenance (PM) safety testing, repairs, calibration, installation, routine and emergency service, to general and various specialized diagnostic, therapeutic, and support medical equipment, such as anesthesia machines, sterilizers, ventilators, ultrasound, laser, laboratory, etc., as assigned by the Clinical Engineering (CE) Manager. 
 

ESSENTIAL FUNCTIONS

1.    Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions. 

2.    Maintains a working knowledge of applicable federal, state and local laws, regulations and industry standards.  Complies with Trinity Health’s Organizational Integrity Program, Standards of Conduct, as well as other policies and procedures in order to ensure adherence in a manner that reflects ethical and professional integrity. 

3.    Completes corrective and planned maintenance work order documentation.

4.    Analyzes and prepares reports on program effectiveness and operating cost.

5.    Assists in implementing the medical equipment management program utilizing an equipment life cycle approach.  Meets target objectives and standards for program timeliness and quality.

6.    Promotes teamwork by keeping others informed, participating effectively in group decision making, while working to accomplish team objectives and projects, and by soliciting feedback about one's effectiveness as a team member and leader.

7.    Performs PM procedures on multiple types of general and specialized clinical equipment. 

8.    Monitors CE Department PM completion rates during each monthly scheduled cycle and reports results to Clinical Engineering Manager.

9.    Performs corrective maintenance procedures including diagnosing problems using, thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and document results of activities performed to comply with all regulatory and standard requirements. 

10.    Performs PM procedures using manufactures' recommendations, standards or code requirements, as well as industry acceptable processes and guidelines.

11.    Notifies equipment users and CE Manager of repair status or delays as necessary. 

12.    Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to the hospital departments.   

13.    Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines. 

14.    Participates in various hospital committees as assigned, such as laser safety, risk management, and safety/EOC committees as assigned by CE Manager.

15.    Continually improves processes by seeking ways to eliminate and reduce waste.

16.    Has authority (based on department guidelines)  to order parts and supplies required for emergency service or repair  of medical equipment. Recommend test equipment and spare equipment parts to the CE Manager.

17.    Provide on-call service coverage after normal business hours on a rotating basis as assigned.

18.     Provide assistance and training to all Bio-Medical Equipment Techs as assigned.

19.     Functions as Clinical Engineering representative in the absence of the CE Manager.

20.    Performs other duties as assigned or requested by CE Manager.

MINIMUM QUALIFICATIONS

1.    Minimum of an Associates of Applied Sciences Degree in related field of medical electronics, electronic technology or equivalent military related training required.  CBET, CLET, or CRES certification preferred.

2.    Five or more years experience or equivalent performing corrective and planned  maintenance on medical  devices and/or clinical support equipment. 

3.    Must have a basic understanding of anatomy, physiology, and medical terminology.

4.    Working knowledge and ability to use basic hand tools and test equipment specific to the field.  Ability to train CE  associates on  use and application of test equipment.

5.    Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repairs.

6.    Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and Clinical Engineering.

7.    Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

8.    Must have basic understanding of personal computer operation, applications and ability to input data using keyboard.  Technician must be able to  follow complex written instructions, perform tasks and document actions taken.

9.    Strong customer service and communications skills are required to interact with hospital  personnel and vendors to achieve positive outcomes. 

10.    Maintain up to date understanding of The Joint Commission and NFPA standards as well as state and federal regulations.

11.    Ability to provide or coordinate in-service training to clinical/professional staff on medical device  operations and safety functions.

PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS

1.    Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

2.    Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

3.    Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices.  

4.    Must be able to hear speech, distinguish sounds, and speak.

5.    Must have near vision, far vision, depth perception, and be able to distinguish colors.

6.    Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

7.    Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds. 

8.    Must be able to push or pull over 100 pounds frequently (20% of the time).

9.      Maintains  safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to  job duties.

10.    Must be able to adapt to frequently changing work priorities.

11.    Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Compensation:

Pay Range: $36.34-54.51 per hour

Actual compensation will fall within the range but may vary based on factors such as experience, qualifications, education, location, licensure, certification requirements, and comparisons to colleagues in similar roles.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

About Us:

At Biz2Credit, we are looking for individuals who are ready to join a dynamic and innovative fintech company on a mission to change the lending landscape for small businesses. Our values of Collaboration, Responsibility, Empowerment, Disruption, Innovation, and Trust guide everything we do, and our purpose of helping small businesses succeed drives us forward.

As a company, we believe that with the right tools and support, small business owners can achieve their dreams, and we're here to make that happen. That's why we're dedicated to developing cutting-edge solutions, like our Biz2X platform, a fully configurable SaaS solution that leverages artificial intelligence and machine learning to make lending more efficient, effective, and accessible.

But we're more than just another FinTech company. We're a team of individuals who bring their unique personalities, backgrounds, and experiences to work every day. We believe that diversity makes us stronger, and that's why we value a culture that is inclusive and supportive. We're looking for people who are excited about the opportunity to make a difference, who want to work in an environment that is both challenging and fun, and who are eager to bring their whole selves to work.

So, if you're someone who is eager to join a company that is making a real impact, who values a positive and inclusive workplace culture, and who is ready to be a part of a team that is changing the lending landscape, we want to hear from you. Come join us and be a part of something truly special at Biz2Credit.

About the Role

Biz2Credit is launching a new small-business credit card, and we are hiring a Director Fraud Risk to build and scale the risk engine that powers the product. This role sits within the Risk organization and focuses on designing and executing the fraud and credit strategies required to safely grow a new card portfolio.

You will own fraud and credit risk strategy across the full lifecycle, partner with Data Science on model development, work with product and engineering to implement rules and logic, and collaborate with vendors who support fraud detection, identity verification, and credit decisioning. This is a hands-on, analytics-driven role for someone who has built or scaled card risk systems before.

Key Responsibilities

Fraud Risk Strategy & Analytics

• Develop and manage fraud strategies across the full credit card lifecycle: KYC, KYB, onboarding, transaction monitoring, disputes, and chargebacks
• Build and optimize fraud rules, signals, and decisioning logic
• Partner with Data Science to develop or enhance fraud models
• Monitor fraud KPIs, emerging patterns, and loss trends to adjust strategy
• Work with fraud vendors and platforms to implement rules, workflows, and detection capabilities

Credit Risk Strategy & Analytics

• Own credit line assignment, credit line increases (CLI), credit line decreases (CLD), and ongoing credit monitoring
• Develop and refine credit risk segmentation, cutoffs, and exposure strategies
• Partner with Data Science online assignment models and credit risk models
• Build dashboards and analytics to track credit performance, delinquencies, and portfolio trends
• Continuously optimize credit policies to balance growth and risk

Card Program Buildout & Scaling

• Contribute to building the fraud and credit risk foundation for a new credit card program
• Support scaling of the portfolio through iterative strategy, analytics, and model improvements
• Ensure risk systems, rules, and logic are implemented correctly across product, engineering, and vendor platforms

Cross‑Functional Collaboration

• Work closely with product, engineering, operations, and external vendors to launch and scale long duration programs
• Translate risk strategy into technical requirements for implementation
• Partner with compliance teams as needed; deep expertise not required, but familiarity with Reg Z, Reg B, FCRA, and UDAAP is helpful

Qualifications

• 5–10+ years of experience in credit card fraud risk, credit risk, risk analytics, or risk modeling
• Hands‑on experience with fraud lifecycle management: KYC, KYB, onboarding, transaction monitoring, disputes, chargebacks
• Experience with credit line strategy: limit assignment, CLI, CLD, and credit monitoring
• Strong analytics background; proficiency in SQL required, Python preferred
• Experience working with fraud and/or credit risk vendors and platforms (e.g., decision engines, fraud tools, KYC/KYB providers)
• Experience building or scaling risk strategies for a credit card program
• Ability to work cross functionally with product, engineering, data science, and vendors
• Familiarity with compliance requirements for credit cards; ability to partner with compliance teams

Who Thrives in This Role

• Someone who has built or scaled a credit card risk engine
• A fraud + credit strategist who is equally comfortable with rules, analytics, and models
• A hands-on operator who can design strategy and also dig into SQL
• Someone who enjoys cross-functional execution and long-term program building
• A risk expert who wants to shape the foundation of a new card product

DIN TAI FUNG RESTAURANTS

JOB PURPOSE:

As General Manager, you’re the co-captain of the restaurant, partnering with the Executive Kitchen Manager to keep everything running at the top of its game. You own the front-of-house, champion service excellence, manage inventory and costs, and plan labor. With a sharp eye on team development, financial performance, and smooth operations, you help shape the culture and drive success every single shift.

WHY DIN TAI FUNG?

Din Tai Fung (DTF) is a globally celebrated, family-owned restaurant brand founded in 1972 and internationally renowned for its iconic Xiao Long Bao. What started as a small family business has grown into one of the most recognized restaurant brands in the world, with more than 165 locations across 13 countries and a reputation for extraordinary quality, precision, and hospitality.

Our Manhattan location represents an exciting chapter in our growth in New York, bringing the DTF experience to one of the most dynamic and competitive restaurant markets in the world. This restaurant operates at a high level of volume and precision, where strong leadership, operational excellence, and teamwork are essential to delivering the exceptional guest experience we’re known for globally. Read our Wall Street Journal article - America’s Most Successful Restaurant Chain Feeds a Dumpling Frenzy

As a General Manager in Manhattan, you’ll lead a fast-paced, high-performing restaurant while developing a team that takes pride in delivering an outstanding dining experience every day.

LOCATION: 1633 Broadway, New York, NY 10022

SALARY RANGE FOR GENERAL MANAGER: $185,000 - $220,000 annual base salary, plus eligibility for the annual incentive plan based on individual and company performance.

The base salary or hourly wage range for this role will vary based on multiple factors, including but not limited to prior experience, relevant expertise, current business needs, and market factors. Range is not inclusive of potential bonus or benefits. Your Talent Acquisition Partner can share more information about the salary range and other factors during the hiring process.

BENEFITS AND PERKS:

• Competitive Pay & Benefits
• Employer Contribution for individuals and eligible dependents' medical insurance
• Dental, Vision, and Life Insurance
• Health Savings Account (HSA)
• Commuter Spending Accounts
• 401(k) Plan with company match
• Employee Assistance Program
• Discounts through BenefitHub
• Employee Meal Discounts
• Paid Time Off (PTO) to support work-life balance (accrued based on length of service)
• Paid Sick Leave (PSL) to care for your health or loved ones
• Quarterly Wellness Days - extra time off to recharge every season
• Car Allowance
• Bonus Eligible
• Opportunities for growth; we love promoting within!

JOB RESPONSIBILITIES:

• Oversees all front-of-house operations to ensure service excellence, brand standards, and consistent daily execution.
• Leads by example, fostering a positive, professional culture through hiring, training, coaching, and motivating staff to meet company goals.
• Sets and communicates performance expectations, holds team members accountable, aligns staff with business strategies, and maintains transparent communication with leadership.
• Manages budgets and financial reports, monitors profitability, ensures accounting compliance, and drives sales and profit-improvement initiatives.
• Creates effective schedules that meet business and labor needs, ensures proper staffing levels, and builds a strong leadership pipeline.
• Manages inventory, ordering, and vendor relationships to ensure efficiency, quality, and operational support.

JOB REQUIREMENTS FOR GENERAL MANAGER:

• 3+ years of management experience in a high-volume, full-service restaurant.
• Strong knowledge of brand standards, steps of service, and front of house operations.
• Proven leadership skills with experience hiring, training, and developing service-driven teams.
• Ability to manage budgets and interpret financial statements (e.g., labor cost, P&L).
• Effective communication and organizational skills, with the ability to collaborate cross-functionally.
• Ability to stand for long periods of time.
• Ability to lift 20+ lbs.
• Comfortable with being exposed to hot and cold temperatures.

PREFERRED QUALIFICATIONS:

• Bachelor's degree or equivalent in Business, Hospitality, or related field.

NOTE: This job description in no way states or implies that these are the only duties to be performed by the employee occupying the position. Employees will be required to perform any other job-related duties assigned by their supervisor.

Applicant must be 18 years of age or older and able to provide documentation to work in the United States legally

Equal Opportunity Employer:

Din Tai Fung North America is an Equal Employment Opportunity Employer. We are committed to creating an inclusive environment and welcome all qualified applicants, regardless of race, color, religion, sex, gender identity, sexual orientation, national origin, age, disability, or any other protected status, in accordance with applicable federal, state/provincial, and local laws.

U.S. Employment Eligibility:

In the United States, Din Tai Fung North America participates in E-Verify to confirm work authorization for all new hires. To learn more, please visit:

• Inspect electrical construction work associated with aeronautical lighting systems, 5kV systems, electrical substations/regulators, high-tension systems, Fiber Optic communication infrastructure, fire alarm systems, and other electrical-based work.
• Review plans and specifications for constructability and compliance with codes and contract requirements.
• Prepare detailed inspection reports, daily narratives, controlled inspection reports, and time/material documentation.
• Identify potential extra work issues and provide estimates, sketches, and supporting documentation.
• Review contractor payment requests and recommend reasonableness to the Resident Engineer.
• Ensure contractor compliance with MWBE participation, certified payrolls, and other regulatory reporting.
• Maintain accurate project records, databases, and filing systems.
• Coordinate inspections, meetings, and follow-ups with contractors and internal staff.
• Enforce safety compliance including LOTO, fall protection, trench excavation, confined space, and permit-required confined space OSHA regulations.

• Bachelor's degree in electrical engineering.
• Minimum of 10 years' experience inspecting electrical construction work, with projects ranging from $500K to $5M+ in size and varying complexity.
• Valid Driver's License required.
• Ability to obtain high-level security clearance such as SWAC, SIDA at Airports, or TWIC at Ports.
• Night and weekend shifts required.
• Completion of 30-hour OSHA Construction Safety Training.
• Relevant Electrical Licenses/Certifications: NJ DCA Electrical Inspector License, NICET Certifications - Electrical Power Tests and Fire Alarm Systems Level III or higher.

• Strong knowledge of electrical construction methods, safety standards, and inspection procedures.
• Excellent oral and written communication skills.
• Ability to read plans, specifications, and contract documents.
• Strong attention to detail with excellent organizational skills.
• Ability to work independently and exercise professional judgment in task execution.
• Experience with large-scale, complex construction projects preferred.

• 401(k) with employer matching
• Health, dental, and life insurance
• Long-term disability (LTD) and accidental death & dismemberment (AD&D)
• Paid time off and holidays
• Professional development assistance

CookUnity is growing at an extraordinary pace, with more than one million square feet of new facilities coming online in the next few years. Every 1% optimization in how we design and run our operations translates into millions of dollars saved and happier customers.

We are looking for our first senior technical individual contributor in manufacturinga proven process excellence leader who can bring a unifying, systems-level approach to food production. Today, our specialist teams (culinary, FSQA, procurement, operations, logistics, etc.) each contribute valuable solutions. This role will knit those perspectives together, ensuring that layouts, processes, and tools work as one integrated system built for scale.

This leader will act as both a strategic architect and a hands-on change agent, driving continuous improvement and operational excellence across all manufacturing sites. They will also hold ownership of integral recommendations to the CEO and COO on all operations and manufacturing design decisions.

• 
  
• Own high-impact, cross-functional projects that improve throughput, reduce costs, and optimize workflows across Culinary, Marketplace, Supply Chain, Fulfillment, and Logistics.
  
• Champion continuous improvement by deploying Lean and Six Sigma methodologies to eliminate waste, reduce variability, and drive productivity gains.
  
• Build and scale food manufacturing processes to support rapid company growth while maintaining uncompromising food safety and regulatory compliance.
  
• Apply plant-level expertise layouts, material flows, drainage/flooring design, utilities, regulatory standards to ensure world-class facility design and operations.
  
• Leverage data-driven insights and Six Sigma methodologies to prioritize and measure improvement initiatives.
  
• Partner with executive leadership to define and execute the long-term manufacturing strategy, including facilities design, automation, process design, and technology enablement.
  
• Develop, coach, and mentor high-performing manufacturing leaders, fostering a culture of safety, quality, ownership, and innovation.
  
• Act as a change leader, influencing cross-departmental alignment and ensuring seamless execution of projects across the broader organization.
  

• 
  
• Proven experience leading cross-functional initiatives with measurable impact on cost, throughput, and quality.
  
• Bachelors degree in Engineering, Operations, Supply Chain, or related field; advanced degree preferred.
  
• Experience in large-scale, structured environments (Fortune 500, CPG, high-volume manufacturing); startup/high-growth adaptability is a plus.
  
• 58 years of direct plant ownership experience, running production lines, full departments, or entire plants (depending on size).
  
• Demonstrated ownership of P&L for a plant, department, or business unit at some point in their career.
  
• Clear track record of driving efficiency, throughput, and operational improvements with measurable impact on cost, quality, and productivity.
  
• Strong leadership presence with the ability to balance hands-on operational problem-solving and strategic process design.
  
• Black Belt or Master Black Belt in Six Sigma (or equivalent process improvement certification) strongly preferred.
  
• Expertise in Lean Manufacturing, Kaizen, or related continuous improvement methodologies.
  
• Deep expertise in food manufacturing, CPG operations, or highly optimized process industries.
  
• Strong plant management exposure: materials, layouts, utilities, and regulatory compliance.
  

• 
  
• Reduction of manufacturing cost per meal while maintaining uncompromising quality and safety.
  
• Scalable systems and processes that enable CookUnity to double or triple output seamlessly.
  
• Integral recommendations to CEO and COO that drive company-wide decisions on manufacturing strategy.
  
• Cross-functional projects delivered on time, within scope, and with clear, measurable business results.
  
• A manufacturing team that is empowered, aligned, and operating at world-class standards.
  

We believe great leadership starts with alignment on vision, values, and ways of working. To give you deeper insight into who we are and what were looking for, we invite you to explore:CookUnity's Leadership Principles The values and behaviors that guide how we operate, collaborate, and scale.

We hope this provides valuable insight into our culture and product vision. If this excites you, wed love to connect!

Health Insurance coverage

401k Plan

We grow, you grow: Stock Options Plan granted on Day 1

Eligible for a bi-annual performance bonus

Unlimited PTO

5- year Sabbatical: After 5 years with CookUnity, you get a 4-week paid sabbatical

Paid Family leave

Compassionate Leave: 3-5 days each time the need arises

A generous amount of CookUnity credits to enjoy our amazing meals, added to your account, monthly

Wellness perks: access to fitness subsidies to build a healthy lifestyle

Personalized Spanish coach

Awesome opportunity to join a company that is looking to change how we eat and how chefs work!