Engineering Structures Impact Factor Jobs in Albany Ny Remote
936 positions found — Page 2
POSITION PURPOSE
Assists Clinical Engineering Manager in planning, developing, and implementing the medical equipment management program utilizing an equipment life cycle approach. Coordinates planned and corrective maintenance of diagnostic and therapeutic medical equipment used throughout the hospital. Ensures continuous improvement in quality, operational cost effectiveness, customer satisfaction and resource utilization. Supports and fosters team building within the local and corporate clinical engineering team. As needed, provides Planned Maintenance (PM) safety testing, repairs, calibration, installation, routine and emergency service, to general and various specialized diagnostic, therapeutic, and support medical equipment, such as anesthesia machines, sterilizers, ventilators, ultrasound, laser, laboratory, etc., as assigned by the Clinical Engineering (CE) Manager.
ESSENTIAL FUNCTIONS
1. Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.
2. Maintains a working knowledge of applicable federal, state and local laws, regulations and industry standards. Complies with Trinity Health’s Organizational Integrity Program, Standards of Conduct, as well as other policies and procedures in order to ensure adherence in a manner that reflects ethical and professional integrity.
3. Completes corrective and planned maintenance work order documentation.
4. Analyzes and prepares reports on program effectiveness and operating cost.
5. Assists in implementing the medical equipment management program utilizing an equipment life cycle approach. Meets target objectives and standards for program timeliness and quality.
6. Promotes teamwork by keeping others informed, participating effectively in group decision making, while working to accomplish team objectives and projects, and by soliciting feedback about one's effectiveness as a team member and leader.
7. Performs PM procedures on multiple types of general and specialized clinical equipment.
8. Monitors CE Department PM completion rates during each monthly scheduled cycle and reports results to Clinical Engineering Manager.
9. Performs corrective maintenance procedures including diagnosing problems using, thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and document results of activities performed to comply with all regulatory and standard requirements.
10. Performs PM procedures using manufactures' recommendations, standards or code requirements, as well as industry acceptable processes and guidelines.
11. Notifies equipment users and CE Manager of repair status or delays as necessary.
12. Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to the hospital departments.
13. Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.
14. Participates in various hospital committees as assigned, such as laser safety, risk management, and safety/EOC committees as assigned by CE Manager.
15. Continually improves processes by seeking ways to eliminate and reduce waste.
16. Has authority (based on department guidelines) to order parts and supplies required for emergency service or repair of medical equipment. Recommend test equipment and spare equipment parts to the CE Manager.
17. Provide on-call service coverage after normal business hours on a rotating basis as assigned.
18. Provide assistance and training to all Bio-Medical Equipment Techs as assigned.
19. Functions as Clinical Engineering representative in the absence of the CE Manager.
20. Performs other duties as assigned or requested by CE Manager.
MINIMUM QUALIFICATIONS
1. Minimum of an Associates of Applied Sciences Degree in related field of medical electronics, electronic technology or equivalent military related training required. CBET, CLET, or CRES certification preferred.
2. Five or more years experience or equivalent performing corrective and planned maintenance on medical devices and/or clinical support equipment.
3. Must have a basic understanding of anatomy, physiology, and medical terminology.
4. Working knowledge and ability to use basic hand tools and test equipment specific to the field. Ability to train CE associates on use and application of test equipment.
5. Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repairs.
6. Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and Clinical Engineering.
7. Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.
8. Must have basic understanding of personal computer operation, applications and ability to input data using keyboard. Technician must be able to follow complex written instructions, perform tasks and document actions taken.
9. Strong customer service and communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes.
10. Maintain up to date understanding of The Joint Commission and NFPA standards as well as state and federal regulations.
11. Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.
PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS
1. Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.
2. Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.
3. Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices.
4. Must be able to hear speech, distinguish sounds, and speak.
5. Must have near vision, far vision, depth perception, and be able to distinguish colors.
6. Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.
7. Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.
8. Must be able to push or pull over 100 pounds frequently (20% of the time).
9. Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.
10. Must be able to adapt to frequently changing work priorities.
11. Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.
Compensation:
Pay Range: $36.34-54.51 per hour
Actual compensation will fall within the range but may vary based on factors such as experience, qualifications, education, location, licensure, certification requirements, and comparisons to colleagues in similar roles.
Our Commitment
Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.
POSITION PURPOSE
Assists Clinical Engineering Manager in planning, developing, and implementing the medical equipment management program utilizing an equipment life cycle approach. Coordinates planned and corrective maintenance of diagnostic and therapeutic medical equipment used throughout the hospital. Ensures continuous improvement in quality, operational cost effectiveness, customer satisfaction and resource utilization. Supports and fosters team building within the local and corporate clinical engineering team. As needed, provides Planned Maintenance (PM) safety testing, repairs, calibration, installation, routine and emergency service, to general and various specialized diagnostic, therapeutic, and support medical equipment, such as anesthesia machines, sterilizers, ventilators, ultrasound, laser, laboratory, etc., as assigned by the Clinical Engineering (CE) Manager.
ESSENTIAL FUNCTIONS
1. Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.
2. Maintains a working knowledge of applicable federal, state and local laws, regulations and industry standards. Complies with Trinity Health’s Organizational Integrity Program, Standards of Conduct, as well as other policies and procedures in order to ensure adherence in a manner that reflects ethical and professional integrity.
3. Completes corrective and planned maintenance work order documentation.
4. Analyzes and prepares reports on program effectiveness and operating cost.
5. Assists in implementing the medical equipment management program utilizing an equipment life cycle approach. Meets target objectives and standards for program timeliness and quality.
6. Promotes teamwork by keeping others informed, participating effectively in group decision making, while working to accomplish team objectives and projects, and by soliciting feedback about one's effectiveness as a team member and leader.
7. Performs PM procedures on multiple types of general and specialized clinical equipment.
8. Monitors CE Department PM completion rates during each monthly scheduled cycle and reports results to Clinical Engineering Manager.
9. Performs corrective maintenance procedures including diagnosing problems using, thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and document results of activities performed to comply with all regulatory and standard requirements.
10. Performs PM procedures using manufactures' recommendations, standards or code requirements, as well as industry acceptable processes and guidelines.
11. Notifies equipment users and CE Manager of repair status or delays as necessary.
12. Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to the hospital departments.
13. Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.
14. Participates in various hospital committees as assigned, such as laser safety, risk management, and safety/EOC committees as assigned by CE Manager.
15. Continually improves processes by seeking ways to eliminate and reduce waste.
16. Has authority (based on department guidelines) to order parts and supplies required for emergency service or repair of medical equipment. Recommend test equipment and spare equipment parts to the CE Manager.
17. Provide on-call service coverage after normal business hours on a rotating basis as assigned.
18. Provide assistance and training to all Bio-Medical Equipment Techs as assigned.
19. Functions as Clinical Engineering representative in the absence of the CE Manager.
20. Performs other duties as assigned or requested by CE Manager.
MINIMUM QUALIFICATIONS
1. Minimum of an Associates of Applied Sciences Degree in related field of medical electronics, electronic technology or equivalent military related training required. CBET, CLET, or CRES certification preferred.
2. Five or more years experience or equivalent performing corrective and planned maintenance on medical devices and/or clinical support equipment.
3. Must have a basic understanding of anatomy, physiology, and medical terminology.
4. Working knowledge and ability to use basic hand tools and test equipment specific to the field. Ability to train CE associates on use and application of test equipment.
5. Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repairs.
6. Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and Clinical Engineering.
7. Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.
8. Must have basic understanding of personal computer operation, applications and ability to input data using keyboard. Technician must be able to follow complex written instructions, perform tasks and document actions taken.
9. Strong customer service and communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes.
10. Maintain up to date understanding of The Joint Commission and NFPA standards as well as state and federal regulations.
11. Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.
PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS
1. Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.
2. Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.
3. Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices.
4. Must be able to hear speech, distinguish sounds, and speak.
5. Must have near vision, far vision, depth perception, and be able to distinguish colors.
6. Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.
7. Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.
8. Must be able to push or pull over 100 pounds frequently (20% of the time).
9. Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.
10. Must be able to adapt to frequently changing work priorities.
11. Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.
Compensation:
Pay Range: $36.34-54.51 per hour
Actual compensation will fall within the range but may vary based on factors such as experience, qualifications, education, location, licensure, certification requirements, and comparisons to colleagues in similar roles.
Our Commitment
Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.
POSITION PURPOSE
Assists Clinical Engineering Manager in planning, developing, and implementing the medical equipment management program utilizing an equipment life cycle approach. Coordinates planned and corrective maintenance of diagnostic and therapeutic medical equipment used throughout the hospital. Ensures continuous improvement in quality, operational cost effectiveness, customer satisfaction and resource utilization. Supports and fosters team building within the local and corporate clinical engineering team. As needed, provides Planned Maintenance (PM) safety testing, repairs, calibration, installation, routine and emergency service, to general and various specialized diagnostic, therapeutic, and support medical equipment, such as anesthesia machines, sterilizers, ventilators, ultrasound, laser, laboratory, etc., as assigned by the Clinical Engineering (CE) Manager.
ESSENTIAL FUNCTIONS
1. Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.
2. Maintains a working knowledge of applicable federal, state and local laws, regulations and industry standards. Complies with Trinity Health’s Organizational Integrity Program, Standards of Conduct, as well as other policies and procedures in order to ensure adherence in a manner that reflects ethical and professional integrity.
3. Completes corrective and planned maintenance work order documentation.
4. Analyzes and prepares reports on program effectiveness and operating cost.
5. Assists in implementing the medical equipment management program utilizing an equipment life cycle approach. Meets target objectives and standards for program timeliness and quality.
6. Promotes teamwork by keeping others informed, participating effectively in group decision making, while working to accomplish team objectives and projects, and by soliciting feedback about one's effectiveness as a team member and leader.
7. Performs PM procedures on multiple types of general and specialized clinical equipment.
8. Monitors CE Department PM completion rates during each monthly scheduled cycle and reports results to Clinical Engineering Manager.
9. Performs corrective maintenance procedures including diagnosing problems using, thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and document results of activities performed to comply with all regulatory and standard requirements.
10. Performs PM procedures using manufactures' recommendations, standards or code requirements, as well as industry acceptable processes and guidelines.
11. Notifies equipment users and CE Manager of repair status or delays as necessary.
12. Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to the hospital departments.
13. Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.
14. Participates in various hospital committees as assigned, such as laser safety, risk management, and safety/EOC committees as assigned by CE Manager.
15. Continually improves processes by seeking ways to eliminate and reduce waste.
16. Has authority (based on department guidelines) to order parts and supplies required for emergency service or repair of medical equipment. Recommend test equipment and spare equipment parts to the CE Manager.
17. Provide on-call service coverage after normal business hours on a rotating basis as assigned.
18. Provide assistance and training to all Bio-Medical Equipment Techs as assigned.
19. Functions as Clinical Engineering representative in the absence of the CE Manager.
20. Performs other duties as assigned or requested by CE Manager.
MINIMUM QUALIFICATIONS
1. Minimum of an Associates of Applied Sciences Degree in related field of medical electronics, electronic technology or equivalent military related training required. CBET, CLET, or CRES certification preferred.
2. Five or more years experience or equivalent performing corrective and planned maintenance on medical devices and/or clinical support equipment.
3. Must have a basic understanding of anatomy, physiology, and medical terminology.
4. Working knowledge and ability to use basic hand tools and test equipment specific to the field. Ability to train CE associates on use and application of test equipment.
5. Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repairs.
6. Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and Clinical Engineering.
7. Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.
8. Must have basic understanding of personal computer operation, applications and ability to input data using keyboard. Technician must be able to follow complex written instructions, perform tasks and document actions taken.
9. Strong customer service and communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes.
10. Maintain up to date understanding of The Joint Commission and NFPA standards as well as state and federal regulations.
11. Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.
PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS
1. Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.
2. Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.
3. Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices.
4. Must be able to hear speech, distinguish sounds, and speak.
5. Must have near vision, far vision, depth perception, and be able to distinguish colors.
6. Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.
7. Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.
8. Must be able to push or pull over 100 pounds frequently (20% of the time).
9. Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.
10. Must be able to adapt to frequently changing work priorities.
11. Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.
Compensation:
Pay Range: $36.34-54.51 per hour
Actual compensation will fall within the range but may vary based on factors such as experience, qualifications, education, location, licensure, certification requirements, and comparisons to colleagues in similar roles.
Our Commitment
Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.
POSITION PURPOSE
Assists Clinical Engineering Manager in planning, developing, and implementing the medical equipment management program utilizing an equipment life cycle approach. Coordinates planned and corrective maintenance of diagnostic and therapeutic medical equipment used throughout the hospital. Ensures continuous improvement in quality, operational cost effectiveness, customer satisfaction and resource utilization. Supports and fosters team building within the local and corporate clinical engineering team. As needed, provides Planned Maintenance (PM) safety testing, repairs, calibration, installation, routine and emergency service, to general and various specialized diagnostic, therapeutic, and support medical equipment, such as anesthesia machines, sterilizers, ventilators, ultrasound, laser, laboratory, etc., as assigned by the Clinical Engineering (CE) Manager.
ESSENTIAL FUNCTIONS
1. Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.
2. Maintains a working knowledge of applicable federal, state and local laws, regulations and industry standards. Complies with Trinity Health’s Organizational Integrity Program, Standards of Conduct, as well as other policies and procedures in order to ensure adherence in a manner that reflects ethical and professional integrity.
3. Completes corrective and planned maintenance work order documentation.
4. Analyzes and prepares reports on program effectiveness and operating cost.
5. Assists in implementing the medical equipment management program utilizing an equipment life cycle approach. Meets target objectives and standards for program timeliness and quality.
6. Promotes teamwork by keeping others informed, participating effectively in group decision making, while working to accomplish team objectives and projects, and by soliciting feedback about one's effectiveness as a team member and leader.
7. Performs PM procedures on multiple types of general and specialized clinical equipment.
8. Monitors CE Department PM completion rates during each monthly scheduled cycle and reports results to Clinical Engineering Manager.
9. Performs corrective maintenance procedures including diagnosing problems using, thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and document results of activities performed to comply with all regulatory and standard requirements.
10. Performs PM procedures using manufactures' recommendations, standards or code requirements, as well as industry acceptable processes and guidelines.
11. Notifies equipment users and CE Manager of repair status or delays as necessary.
12. Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to the hospital departments.
13. Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.
14. Participates in various hospital committees as assigned, such as laser safety, risk management, and safety/EOC committees as assigned by CE Manager.
15. Continually improves processes by seeking ways to eliminate and reduce waste.
16. Has authority (based on department guidelines) to order parts and supplies required for emergency service or repair of medical equipment. Recommend test equipment and spare equipment parts to the CE Manager.
17. Provide on-call service coverage after normal business hours on a rotating basis as assigned.
18. Provide assistance and training to all Bio-Medical Equipment Techs as assigned.
19. Functions as Clinical Engineering representative in the absence of the CE Manager.
20. Performs other duties as assigned or requested by CE Manager.
MINIMUM QUALIFICATIONS
1. Minimum of an Associates of Applied Sciences Degree in related field of medical electronics, electronic technology or equivalent military related training required. CBET, CLET, or CRES certification preferred.
2. Five or more years experience or equivalent performing corrective and planned maintenance on medical devices and/or clinical support equipment.
3. Must have a basic understanding of anatomy, physiology, and medical terminology.
4. Working knowledge and ability to use basic hand tools and test equipment specific to the field. Ability to train CE associates on use and application of test equipment.
5. Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repairs.
6. Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and Clinical Engineering.
7. Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.
8. Must have basic understanding of personal computer operation, applications and ability to input data using keyboard. Technician must be able to follow complex written instructions, perform tasks and document actions taken.
9. Strong customer service and communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes.
10. Maintain up to date understanding of The Joint Commission and NFPA standards as well as state and federal regulations.
11. Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.
PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS
1. Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.
2. Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.
3. Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices.
4. Must be able to hear speech, distinguish sounds, and speak.
5. Must have near vision, far vision, depth perception, and be able to distinguish colors.
6. Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.
7. Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.
8. Must be able to push or pull over 100 pounds frequently (20% of the time).
9. Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.
10. Must be able to adapt to frequently changing work priorities.
11. Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.
Compensation:
Pay Range: $36.34-54.51 per hour
Actual compensation will fall within the range but may vary based on factors such as experience, qualifications, education, location, licensure, certification requirements, and comparisons to colleagues in similar roles.
Our Commitment
Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.
Own the project control activity globally and drive consistent functional specifications and processes.
Impact quality, efficiency, and effectiveness of the team with significant input into priorities.
Role requires some travel within the US, Latin America, and globally.
Responsibilities: Develop a scope of work and plan, schedule, and monitor engineering activities for customer projects.
Provide technical leadership and interface with Proposal Management, Cost Estimating, Partners, Customers, Product Engineering, Sourcing, and Engineering sub-contractors.
Contribute towards strategy and policy development, ensuring delivery within the area of responsibility.
Manage a cross-functional Engineering team to master the risks and opportunities of the Contract.
Provide technical guidance and assistance to Project Management and internal engineering teams.
Review Customer specifications and communicate contract and project requirements to all design functions.
Evaluate financial/schedule impact of Customer requested scope changes.
Provide technical support to Engineering, Sourcing, Vendors, and Installation teams to ensure equipment meets all Customer requirements and business objectives.
Enforce quality procedures and participate in their improvement.
Capture issues for feedback (Lessons Learned).
Serve as Senior Project Engineering Manager to lead and facilitate a total project solution across all product lines.
Drive functional resolution to technical project issues from a system level across product lines.
Manage technical risks and drive project profitability according to assigned budgets.
Requirements: Bachelor's or higher degree in Engineering or any other related STEM program from an accredited university or college.
Minimum of 6 years of related industry experience with increasing responsibilities.
Required Skills: Strong interpersonal and leadership skills.
Demonstrated ability to lead programs/projects.
Ability to document, plan, market, and execute programs.
Creativity and problem-solving capability.
Ability to manage multiple priorities simultaneously.
Excellent oral and written communication skills.
Motivated and able to motivate others.
Continuous improvement mindset.
Customer interface experience.
Preferred Skills: Technical superior training with experience in project/team management, preferably in the field of energy or in the management of transverse teams.
Knowledge of Mechanical & electrical codes and compliance.
Knowledge of Turbo machinery, generator, electrical, controls, and/or Power Plant Accessory systems and equipment.
Expertise in one of the disciplines (Mechanical/ Electrical / Process).
Why USAA?
At USAA, our mission is to empower our members to achieve financial security through highly competitive products, exceptional service and trusted advice. We seek to be the #1 choice for the military community and their families.
Embrace a fulfilling career at USAA, where our core values – honesty, integrity, loyalty and service – define how we treat each other and our members. Be part of what truly makes us special and impactful.
The Opportunity
We are looking for a SIU Investigator (mid-level). This is a Desk position. Within defined guidelines and framework, protects USAA and our members from potential fraudulent claims by investigating questionable, suspect claims activity in compliance with state insurance fraud-related laws and regulations and policies and procedures. The selected candidate will have a strong multi-line SIU investigation background.
This position is remote eligible. However, you must currently live in California.
What you'll do:
Applies knowledge and understanding of fraud schemes and investigation strategies on any questionable or suspect first or third part claims.
Participates in the development of fraud prevention strategies.
Applies knowledge of P&C insurance industry products, services, and processes in investigating claims to include P&C insurance policy contracts, coverages and internal claims handling process and procedures.
Applies knowledge of state laws and regulations pertaining to insurance fraud in investigating claims.
Collects evidence of potential fraud through field or remote interviews and thorough searches of investigative databases, internal resources, Internet resources, public records, and forensic tools.
Makes recommendations within defined authority guidelines.
Prepares and presents detailed and comprehensive verbal and written investigative reports summarizing the results of the investigation and recommended outcome.
Develops and maintains external relationships with industry, law enforcement and other contacts involved in fraud investigation, detection, and prevention.
May serve as a resource team member on specific matters through demonstrated skill or training.
Assists with the delivery of fraud awareness training initiatives in a defined environment.
Handles CAT duty responsibilities as business requires.
Ensures risks associated with business activities are effectively identified, measured, monitored, and controlled in accordance with risk and compliance policies and procedures.
Minimum High School Diploma or General Equivalency Diploma (GED).
2+ years claims adjusting experience, or P&C SIU/Fraud Investigation experience OR 4+ years prior investigative law enforcement (to include military) or relevant fraud industry investigation experience.
Proven investigatory skills.
Experience obtaining statements from various parties to incidents, witnesses, and suspects.
Ability to gather broad range of evidence and draw conclusions based on the objective details related to the applicability of fraud.
Demonstrated ability to organize and prioritize workload, performing multiple tasks and devising solutions to problems.
Familiarity with using computers and various software packages to enter and extract data for analysis from relevant data sources and systems.
Knowledge of city, state and local regulations, legal concepts, understanding of contracts, case law, medical treatment, and medical terminology.
SIU experience conducting low to complex P&C fraud investigations OR a combination of Claims and Law Enforcement Investigations OR Military Investigative experience.
Strong multi-line SIU experience
Designations such as CFE, CIFI, SCLA, ACLS, FCLS, LPCS, AIC, CPCU, CCLS, or other.
US military experience through military service or a military spouse/domestic partner
Compensation range: The annualized range for this position is: $77,120 - $147,390. However, this is an hourly position.
Compensation: USAA has an effective process for assessing market data and establishing ranges to ensure we remain competitive. You are paid within the salary range based on your experience and market data of the position. The actual salary for this role may vary by location.
Employees may be eligible for pay incentives based on overall corporate and individual performance and at the discretion of the USAA Board of Directors.
The above description reflects the details considered necessary to describe the principal functions of the job and should not be construed as a detailed description of all the work requirements that may be performed in the job.
Benefits: At USAA our employees enjoy best-in-class benefits to support their physical, financial, and emotional wellness. These benefits include comprehensive medical, dental and vision plans, 401(k), pension, life insurance, parental benefits, adoption assistance, paid time off program with paid holidays plus 16 paid volunteer hours, and various wellness programs. Additionally, our career path planning and continuing education assists employees with their professional goals.
For more details on our outstanding benefits, visit our benefits page on
Applications for this position are accepted on an ongoing basis, this posting will remain open until the position is filled. Thus, interested candidates are encouraged to apply the same day they view this posting.
USAA is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.
Remote working/work at home options are available for this role.
Why USAA?
At USAA, our mission is to empower our members to achieve financial security through highly competitive products, exceptional service and trusted advice. We seek to be the #1 choice for the military community and their families.
Embrace a fulfilling career at USAA, where our core values – honesty, integrity, loyalty and service – define how we treat each other and our members. Be part of what truly makes us special and impactful.
The Opportunity
The Associate Life Solutions Specialist helps to ensure the financial security of our membership by assessing member life insurance needs, providing advice and / or referrals for advice, and making the appropriate recommendations based on members’ individual needs and goals. May provide support to Health Solutions acquisition and retention based on member demand.
We offer a flexible work environment that requires an individual to be in the office 5 days per week, with the opportunity to move to a hybrid schedule after 6 months. This position will be based at the following locations: San Antonio, TX, Colorado Springs, CO Campus. Relocation assistance is not available for this position.
What you'll do:
Receives request for advice from current and prospective members through various channels, including inbound and outbound phone calls, emails, faxes and video telephony. Special Acquisitions Team employees will primarily place outbound calls triggered from underwriting work items. Life Regulatory team employees respond to specific regulatory/business needs as directed by policies and procedures.
Asks questions to discover key information, including life events, and to understand member needs. Documents relevant information. Life Regulatory team employees ask specific questions, often scripted, as needed to complete regulatory requirements and document relevant information.
Assesses member financial situation and goals. Life Regulatory will refer members to Life Sales representative for advice and recommendations.
Develops and communicates appropriate life insurance strategies based on individual member needs. Provides basic protection advice and strategies. Life Regulatory will refer members to Life Sales representative for advice and recommendations.
Recommends relevant life insurance product and solutions and refers members who may need financial advice to the respective department. Life Regulatory will refer members to Life Sales representative for advice and recommendations.
Motivates member to take action on recommendation(s) and resolves objections using basic sales techniques and developing persuasion skills. Implements recommendation(s).
Monitors legislative initiatives that may impact economy, society, and personal financial situation.
Educates membership on implications of economic, industry trends, and tax law changes, as well as USAA's products and services.
May conduct outbound follow-up calls to complete member acquisition of products and services previously discussed.
Work Hours:
Monday – Friday / 7:30am – 8:00pm (Central)
An 8 hour shift will fall within these hours
This role is required to be in office, with potential hybrid opportunity after 6 months.
What you have:
High School diploma or GED
Required maintenance of Life/Health license and/or acquisition within 90 days
Required annual completion of AHIP and Broker/Carrier appointments when applicable.
Up to 1 year of financial industry and/or life sales experience
Experience delivering frequent written and oral communication
Experience acquiring and applying new concepts and information
Experience processing and analyzing information
Experience fulfilling requests and meeting deadlines
Experience resolving conflict and negotiating
Experience multi-tasking in an operating systems environment
Experience participating in a team environment
Successful completion of a job-related assessment may be required
What sets you apart:
Active Group 1 Life and Health license
1+ yrs experience working in Sales with life insurance or financial services products
1+ yrs experience working in a call center environment
CLU® - Chartered Life Underwriter or comparable designation
US military experience through military service or a military spouse/domestic partner
Compensation range: The salary range for this position is: $45,470.00 - $79,110.00.
Compensation: USAA has an effective process for assessing market data and establishing ranges to ensure we remain competitive. You are paid within the salary range based on your experience and market data of the position. The actual salary for this role may vary by location.
Employees may be eligible for pay incentives based on overall corporate and individual performance and at the discretion of the USAA Board of Directors.
The above description reflects the details considered necessary to describe the principal functions of the job and should not be construed as a detailed description of all the work requirements that may be performed in the job.
Benefits: At USAA our employees enjoy best-in-class benefits to support their physical, financial, and emotional wellness. These benefits include comprehensive medical, dental and vision plans, 401(k), pension, life insurance, parental benefits, adoption assistance, paid time off program with paid holidays plus 16 paid volunteer hours, and various wellness programs. Additionally, our career path planning and continuing education assists employees with their professional goals.
For more details on our outstanding benefits, visit our benefits page on
Applications for this position are accepted on an ongoing basis, this posting will remain open until the position is filled. Thus, interested candidates are encouraged to apply the same day they view this posting.
USAA is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.
Remote working/work at home options are available for this role.
Provides nursing care that is efficient, appropriate, and therapeutic for patients while ensuring that established security requirements are maintained (as defined by the Bexar County Adult Detention Center and Central Magistrate’s Office). Continuously monitors the condition and status of patients and delivers care that meets or exceeds established standards. Supports and adheres to University Health System (UH) and Detention Health Care Services (DHCS) policies and procedures. Demonstrates behaviors consistent with UH mission, vision and values. Promotes excellent internal and external customer relations.
EDUCATION/EXPERIENCE
Experience in correctional health care, psychiatric nursing, or nursing in an emergency environment is preferred. Prior knowledge or experience within the University Health nursing services and/or certification as a Certified Correctional Health Care Provider (CCHP) is also preferred.
LICENSURE
Must possess a current license to practice Vocational Nursing in the State of Texas. Must also maintain current CPR certification.
Remote working/work at home options are available for this role.
*Securian Financial the internal position title is Engineering Sr Analyst or Engineering Consultant. Title and salary will be determined based on applied skills.*
Position Summary:
Join theEnterprise Partner Solutions (EPS)team as aLicensing and Compensation Engineer, where you'll drive innovation in partner experience using cutting-edge SAP technologies. This team envisions a future where every financial producer is empowered from day one through intuitive, reliable, and scalable technology. Our engineering team is committed to transforming the producer experience by delivering back-end systems that simplify onboarding, ensure compliance in licensing, and guarantee timely and accurate compensation. We strive to be the trusted backbone of producer operations, enabling our company to grow with confidence and integrity. If you're passionate about engineering solutions that make a measurable impact, this is your opportunity to shape the future of partner engagement at scale.
Responsibilities include but not limited to:
Support and maintain SAP technologies related to partner compensation and licensing, including APM (ICM), ALM, OK2, and Advanced Workflow.
Perform analysis, design, development, and integration on medium to high level complexity assignments.
Develop and support automation capabilities through webservices and APIs.
Troubleshoot and resolve incidents across the licensing and compensation platform, including integrations with internal and external systems.
Collaborate with product analysts, quality engineers, and business stakeholders to deliver enhancements and ensure platform stability.
Analyze job failures, support tickets, and backlog stories to identify trends and drive continuous improvement.
Participate in Agile ceremonies and contribute to sprint planning, story refinement, and retrospectives.
Document technical processes and contribute to knowledge sharing across the EPS team.
Qualifications:
Bachelor's degree in Computer Science, Information Systems, or related field, or equivalent experience.
3+ years of experience supporting SAP technologies, preferably in compensation or licensing domains.
Familiarity with SAP ICM/APM and ALM modules.
Strong problem-solving skills and ability to manage multiple priorities.
Excellent communication skills and ability to work cross-functionally.
Experience with Agile methodologies and DevOps practices is a plus.
Preferred Qualifications:
SAP Certification in relevant Modules
Development Languages: Java, Groovy, SQL, Git, IntelliJ, webservices
Understanding of compensation payment structures for agents and familiarity with licensing and regulatory compliance frameworks governing producer eligibility to sell products.
Ability to work independently and as part of a collaborative team.
Commitment to continuous learning and process improvement.
#LI-hybrid **This position will be in a hybrid working arrangement.**
Securian Financial believes in hybrid work as an integral part of our culture. Associates get the benefit of working both virtually and in our offices. If you're in a commutable distance (90 minutes) you'll join us 3 days each week in our offices to collaborate and build relationships. Our policy allows flexibility for the reality of business and personal schedules.
The estimated base pay range for this job is:
$72,000.00 - $134,000.00Pay may vary depending on job-related factors and individual experience, skills, knowledge, etc. More information on base pay and incentive pay (if applicable) can be discussed with a member of the Securian Financial Talent Acquisition team.
Be you. With us. At Securian Financial, we understand that attracting top talent means offering more than just a job - it means providing a rewarding and fulfilling career. As a valued member of our high-performing team, we want you to connect with your work, your relationships and your community. Enjoy our comprehensive range of benefits designed to enhance your professional growth, well-being and work-life balance, including the advantages listed here:
Paid time off:
We want you to take time off for what matters most to you. Our PTO program provides flexibility for associates to take meaningful time away from work to relax, recharge and spend time doing what's important to them. And Securian Financial rewards associates for their service by providing additional PTO the longer you stay at Securian.
Leave programs: Securian's flexible leave programs allow time off from work for parental leave, caregiver leave for family members, bereavement and military leave.
Holidays: Securian provides nine company paid holidays.
Company-funded pension plan and a 401(k) retirement plan: Share in the success of our company. Securian's 401(k) company contribution is tied to our performance up to 10 percent of eligible earnings, with a target of 5 percent. The amount is based on company results compared to goals related to earnings, sales and service.
Health insurance: From the first day of employment, associates and their eligible family members - including spouses, domestic partners and children - are eligible for medical, dental and vision coverage.
Volunteer time: We know the importance of community. Through company-sponsored events, volunteer paid time off, a dollar-for-dollar matching gift program and more, we encourage you to support organizations important to you.
Associate Resource Groups: Build connections, be yourself and develop meaningful relationships at work through associate-led ARGs. Dedicated groups focus on a variety of interests and affinities, including:
Mental Wellness and Disability
Pride at Securian Financial
Securian Young Professionals Network
Securian Multicultural Network
Securian Women and Allies Network
Servicemember Associate Resource Group
For more information regarding Securian's benefits, please review our Benefits page.
This information is not intended to explain all the provisions of coverage available under these plans. In all cases, the plan document dictates coverage and provisions.
Securian Financial Group, Inc. does not discriminate based on race, color, religion, national origin, sex, gender, gender identity, sexual orientation, age, marital or familial status, pregnancy, disability, genetic information, political affiliation, veteran status, status in regard to public assistance or any other protected status. If you are a job seeker with a disability and require an accommodation to apply for one of our jobs, please contact us by email at , by telephone (voice), or 711 (Relay/TTY).
To view our privacy statement click here
To view our legal statement click here
Remote working/work at home options are available for this role.
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries about this opportunity, please contact one of our Talent Specialists, Hema, at (63 or Sri Balan at (63 Title: Senior Engineer, Global Services
- Hybrid Location: Medina, NY Duration: 12 Months Hours: 9 AM
- 5 PM Flexible on availability to be on-site, with someone who can work 1-2 days per week, Open to relocation and considering senior candidates.
must have the ability to travel Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered.
Description: Summary: Applies a solid understanding of engineering and problem-solving theories/practices toward the development of new or enhanced products or processes.
Creates service deliverables and infrastructure required to support initial product launch and lifecycle management.
Capable of designing machine tooling, jigs, fixtures, gauges and equipment used in the servicing process.
Capable of checking designs and drawings against general standards, design requirements, geometric tolerances, drafting practices and the manufacturing process involved.
The work of the individual should be highly creative, of high quality and offer wide latitude for independent judgment and perception with a minimal amount of supervision.
Need not have any tools/ software experience, CAD would be a plus.
Medical background will be a plus any regulatory background will be good.
Someone who was worked with Engineers, multitasking will be a great fit.
Ambiguity, adapt, multi-task and works with lead engineer in projects.
Support the team of Product core and represent service operations and supply chain.
Will be in charge of Service change implementation.
Focuses on design changes, process changes.
Collaborates with Service Process, Engineers, Technicians, impact of changes.
Oversees Document Revision, Handle Change control, mentored and directed by team to tackle multiple product and project Essential Duties and Responsibilities: 1.
Creates new product development and lifecycle management service deliverables throughout the product lifecycle for medical device products involving hardware.
2.
Supports new product platform releases.
Develops and implements service training, test equipment, tools, spare parts, and service manuals / instructions.
3.
Evaluates / makes recommendations on product releases related to design for serviceability.
Creates (or modifies existing) servicing processes and manuals to support repair or refurbishment of fielded product at multiple global sites or in the field.
4.
Works closely with design team to select, develop, and implement technologies across all medical device development programs.
5.
Analyzes key servicing metrics to identify and implement opportunities for improvement in service process quality, cost, or product reliability.
6.
Coordinates information flow between corporate and local/regional teams.
7.
Owns Corrective and Preventive Actions related to the product(s) core team(s) supported, using sound root cause analysis.
8.
May represent Technical Services on new product development and/or lifecycle management core teams.
9.
May independently plan, schedule and lead cross-functional teams in detailed phases of the engineering work in a project.
10.
May approve the work of lower level engineers; may supervise other engineers or technicians Minimum Qualifications: 1.
Must be well versed in core engineering disciplines (e.g.
mechanical, electrical, software, systems engineering).
2.
Highly motivated self-starter who is able to work with minimal supervision.
3.
Must have good interpersonal and oral/written communication skills, good time management, and be capable of analyzing and solving technical problems through innovative thought and application of sound engineering principles and root cause analysis.
4.
Experience with change control methodologies and configuration management principles is a plus.
5.
Experience with test engineering and/or reliability engineering principles is a plus.
6.
Ability to exercise independent judgment and draw conclusions based on available information.
7.
Good understanding of GMP and quality system requirements.
Education and/or Experience: Bachelor's degree in a core engineering discipline (mechanical, electrical, software, systems, or mfg/process engineering) plus 3-5 years of experience.
Medical device experience or other regulated industry experience preferred.
Experience in the use of Lean Six Sigma tools highly desirable.
About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
GMP, Medical Device, Lean Six Sigma
Remote working/work at home options are available for this role.
