Engineering Structures Impact Factor Jobs No Experience Jobs in Rosemount

• 
  
• Be responsible for quality product standards with no defects.
  
• Meet customer deadlines and expectations.
  
• Be responsible to comply with applicable elements of quality systems.
  
• Participate in cost reduction plans and continuous improvement plans/events, as required.
  
• Participate in audits.
  
• Acquire applicable skill/knowledge/certifications as required.
  
• Perform inspection of parts, does coating, labeling/boxing, and general preparation for shipment.
  
• Check parts for cracks, loose connections, faulty bonds, and faulty assembly.
  
• Record test results in testing log. Route products for rework or salvage of usable parts.
  
• Route reworked assemblies for testing. Clean completed assemblies. Assemble parts according to blueprint specifications.
  
• Test parts by connecting to test equipment setting controls, observing readings and actions of instrument checking for malfunctions.
  
• Set up and use equipment such as: Ragen Assembly, Component Lead Former, Drill Press, Denison Hydraulic Press, Component Lead tinning, and S.M.T. Re-flow.
  
• May fabricate instrument parts through crimping, staking, and cutting.
  
• Acquire applicable skill/knowledge/certifications as required.
  
• Once properly trained and/or certified- perform specific tasks including, but not limited to, welding, soldering, item test and inspection, filler, immersion testing.
  
• Maintain materials, equipment, and work area in a clean and orderly condition.
  
• Comply with all rules and regulations of Raytheon Technologies, including, but not limited to: Environmental Health and Safety,
  
• Complete assigned tasks, not specifically listed, within the scope and skill level of this job description in support of department objectives and to develop individual skills.
  
• Check work methods and results for conformance to standards and re-instruct as required.
  
• Report to lead or supervisor on work progress and updates including conditions surrounding failures to meet quality standards.
  
• Other duties as assigned.
  

• 
  
• Typically requires a HS Diploma or GED.
  
• U.S. Person (U.S. citizen, permanent resident, or granted refugee or asylee status) as defined here: We Prefer:
  
  • 
    
  • Manufacturing experience is strongly preferred
    
  • Career Readiness Certification (CRC) strongly preferred.
    
  • The ability to interpret schematics and/or technical drawings.
    
  • The ability to successfully complete training modules associated with job grade.
    
  • The ability to follow assembly instruction.
    
  • The ability to effectively work in an environment requiring repetitive job responsibilities.
    
  • The ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.
    
  • The ability to understand end uses of products being built.
    
  • Strong written and verbal communication skills.
    
  • Attention to detail to ensure safety and quality.
    
  • Strong organizational skills and ability to multi-task.
    
  • The ability to work in a team to support work capacity in a fast-paced environment.
    
  • Intermediate computer skills in terms of typing, navigating screens and learning new software programs.
    
  • Demonstrated analytical skills and problem-solving abilities.
    
  • The ability to take direction from more experienced coworkers, leads and supervisors.
    
  
  What We Offer:
  1st shift schedule: Monday - Friday; 6:30am - 3:00pm
  Some of our competitive benefits package includes:
  
  • 
    
  • Medical, dental, and vision insurance
    
  • Three weeks of vacation for newly hired employees
    
  • Generous 401(k) plan that includes employer matching funds and separate employer retirement contribution, including a Lifetime Income Strategy option
    
  • Employee Scholar Program, tuition reimbursement program
    
  • Life insurance and disability coverage
    
  • Optional coverages you can buy: Pet Insurance, Home and Auto, additional life insurance, accident insurance, critical illness insurance, group legal
    
  • Ovia Health, fertility and family planning
    
  • Employee Assistance Plan, including up to 5 free counseling sessions
    
  • Incentives for a Healthy You
    
  • Bright Horizons, back-up child / elder care and college coach resources
    
  • Autism Benefit
    
  • Doctor on Demand, virtual doctor visits
    
  • Adoption Assistance
    
  • Teladoc Medical Experts, second opinion program
    
  • And more!
    
  
  Learn More and Apply Now!
  Collins Aerospace, a RTX company, is a leader in technologically advanced and intelligent solutions for the global aerospace and defense industry. Collins Aerospace has the capabilities, comprehensive portfolio and expertise to solve customers' toughest challenges and to meet the demands of a rapidly evolving global market.
  Avionics delivers advanced cockpit displays, vision systems, and comprehensive digital solutions for global government, commercial and business aviation customers. We provide connectivity and managed data services to ensure safety and seamless communication for passengers, crews, and militaries, from aircraft and airports to air traffic management. Join us in creating solutions that connect the world, one flight at a time. Start your application today.
  *Please ensure the role type (defined below) is appropriate for your needs before applying to this role.
  Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.
  Regardless of your role type, collaboration and innovation are critical to our business and all employees will have access to digital tools so they can work with colleagues around the world - and access to Collins sites when their work requires in-person meetings.
  At Collins, the paths we pave together lead to limitless possibility. And the bonds we form - with our customers and with each other -- propel us all higher, again and again.
  Apply now and be part of the team that's redefining aerospace, every day.
  The starting rate of pay for this role is $20.00/hour; however RTX considers several factors when extending an offer, including but not limited to, the role and associated responsibilities, a candidate's work experience, location, education/training, and key skills.
  As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
  Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.
  Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.
  This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.
  RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.
  RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act.
  Privacy Policy and Terms:
  Click on this link to read the Policy and Terms

• 
  
• Production Machining
  
• Capable of set-ups, inspections, blueprint reading, and production processes.
  
• Set up machines to perform operations within its capability by positioning, aligning, securing work, utilizing, and adapting appropriate tools.
  
• Demonstrate the analytical skills that are necessary for machine adjustments and performing the machining process.
  
• Demonstrate proper use of inspection equipment including indicators, micrometers, calipers, and surface plates.
  
• Inspect and certify own work.
  
• Work independent with minimal support for problem solving.
  
• Upkeep of production equipment.
  
• Perform daily, quarterly, annual PM on equipment.
  

• 
  
• Typically a HS diploma with a minimum of 2 years of relevant experience.
  
• The ability to obtain and maintain a U.S. government issued security clearance is required.
  
• U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance
  

• 
  
• Machinist Technical School Certificate/Diploma.
  
• 2+ years of CNC Mill/Lathe experience.
  
• Mazak Mazatrol experience.
  
• Production manufacturing experience.
  
• Current holder of U.S. government issued security clearance
  
• Experience using analytical and problem-solving skills to effectively identify and resolve issues and mitigate risks.
  
• Proficiency in reading and understanding blueprint and technical documentation.
  
• Effective communication and interpersonal skills, with the ability to collaborate with cross-functional teams to achieve operational goals.
  
• Collins Enterprise Values including Safety | Trust | Accountability | Respect | Collaboration | Innovation.
  

• 
  
• Medical, dental, and vision insurance
  
• Three weeks of vacation for newly hired employees
  
• Generous 401(k) plan that includes employer matching funds and separate employer retirement contribution, including a Lifetime Income Strategy option
  
• Employee Scholar Program, tuition reimbursement program
  
• Life insurance and disability coverage
  
• Optional coverages you can buy: Pet Insurance, Home and Auto, additional life insurance, accident insurance, critical illness insurance, group legal
  
• Ovia Health, fertility and family planning
  
• Employee Assistance Plan, including up to 5 free counseling sessions
  
• Incentives for a Healthy You
  
• Bright Horizons, back-up child / elder care and college coach resources
  
• Autism Benefit
  
• Doctor on Demand, virtual doctor visits
  
• Adoption Assistance
  
• Teladoc Medical Experts, second opinion program
  
• And more!
  

Job Title: MDM Architect

Client: Fortune 500 Consumer Products Company

Duration: 6 Months (possible extension or conversion)

Location: Lakeville, MN (Onsite Tuesday–Thursday)

Employment: W2 Only (No C2C / No Sponsorship)

Reporting To: Associate Director of Data Strategy and Integration

Role Overview

The client is currently in the middle of a large M&A integration, bringing together data from 8th Avenue and existing PCB systems across multiple ERPs. The data environment is still early in maturity, and the focus is on standing up a practical MDM foundation using Stibo STEP rather than a full enterprise rollout. This role will lead the design and implementation of master data consolidation across Customer and Finished Goods domains, working closely with Data Quality, Governance, and Data Engineering teams. The position is a mix of architecture and hands-on configuration, focused on building scalable, reusable MDM processes and establishing core governance and data integrity standards.

Key Responsibilities

• Lead design and implementation of master data consolidation for 8th Ave to PCB integration
• Develop conceptual and logical data models for Customer and Item domains
• Design and implement match/merge and survivorship rules, including search-before-create logic
• Build and manage cross-reference mappings between legacy and target systems
• Define MDM architecture, including data flows, integration patterns, and system interactions
• Establish governance framework including CRUD ownership, data stewardship, and integrity controls
• Align closely with Data Quality Technical Lead on data quality rules and processes
• Assess and harmonize Customer and Product hierarchies across systems
• Integrate MDM with enterprise data catalog (metadata, lineage, business glossary)
• Identify gaps in current MDM setup and contribute to future roadmap
• Collaborate with business, ERP, and data teams to gather and refine requirements
• Support UAT, deployment, and post-production issue resolution
• Provide documentation, knowledge transfer, and mentoring to internal teams

Required Skills and Experience

• Strong experience in end-to-end MDM implementations, preferably using Stibo STEP
• Hands-on experience with data modeling, match/merge, survivorship rules, and hierarchies
• Experience working as both architect and hands-on configurator (design + build)
• Strong understanding of data integrity, cross-referencing, and multi-system data consistency
• Experience defining and implementing MDM governance (CRUD ownership, stewardship workflows)
• Ability to work in low data maturity environments and drive structure
• Experience leading cross-functional design discussions with business and ERP teams
• Strong understanding of data governance frameworks and data management practices
• Hands-on experience with JavaScript and REST APIs
• Experience working with search technologies (Elastic Search or similar)
• Strong communication and stakeholder management skills

Nice to Have

• Experience with Stibo STEP SaaS implementations in Customer or Product domains
• Experience in M&A data integration or system consolidation
• Exposure to Oracle JDE environment
• Experience with Snowflake or cloud data platforms
• Experience with Boomi MDH or other integration tools
• Familiarity with data enrichment services (Dun & Bradstreet, Loqate)
• Understanding of data cataloging concepts

Success Criteria

• Master data successfully consolidated across systems with accurate cross-references
• Match/merge and survivorship rules functioning effectively with minimal duplicates
• Post-go-live master data issues remain below 1%
• MDM governance processes established and adopted
• Integration and data flows are stable and scalable