Engineering Structures Impact Factor 2025 Jobs in Mount Prospect

NEW RECRUITMENT AND RETENTION INCENTIVES! Air and Marine Operations (AMO), a component of U.S.

Customs and Border Protection (CBP) offers those with Merchant Mariner Credentials the exceptional opportunity of a career in law enforcement working with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission protecting America.

If you're looking for an exciting and rewarding job that also provides great pay, benefits, and job stability, now is the time to make your move: become a Marine Interdiction Agent .

AMO is actively seeking applicants to fill full-time security-based positions with the nation's largest law enforcement organization charged with maintaining the security of our national borders while facilitating lawful international travel and trade.

DON'T FORGET TO CHECK OUT THE INCENTIVES – SEE SALARY SECTION BELOW! Salary and Benefits Begin your career as a Marine Interdiction Agent (MIA) and make up to $73,939–$96,116 per year based on your qualifications for the GS-11 grade level and possible extra compensation based on your duty location.

Recruitment Incentive: New hires that are eligible may receive a one-time Recruitment Incentive payout of $10,000 after completing Federal Law Enforcement Training Academy (FLETC) (1 year service agreement will need to be completed) (Recruitment Incentive is only available to new Federal employees as described in 5 CFR 575.102.

Eligibility will be determined by Human Resources.) Example annual compensation for the first three years at our CAMB and subordinates new-hire locations (RUS LEAP 25% Retention Incentive).

GS-11 1st year annual pay
- $102,424 GS-12 2nd or 3rd year annual pay
- $132,931 GS-13 3rd year of annual pay
- $158,075 Example annual compensation for the first three years at our Key West, Key Largo, and Marathon, FL new-hire locations (Locality Salary Table LEAP 25% Retention Incentive) GS-11 1st year annual pay
- $108,431 GS-12 2nd or 3rd year annual pay
- $141,575 GS-13 3rd year of annual pay
- $168,352 Example annual compensation for the first three years at our Long Beach, CA new-hire locations (Locality Salary Table LEAP 25% Retention Incentive) GS-11 1st year annual pay
- $107,749 GS-12 2nd or 3rd year annual pay
- $154,974 GS-13 3rd year of annual pay
- $184,285 This career ladder position has a grade level progression of GS-11, GS-12 and GS-13.

You may be eligible for a promotion to the next higher grade level automatically (without re-applying) once you complete 52-weeks at each grade level (with supervisor approval) and any additional training, licensing, and certification requirements.

Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional and ROTH 401(k) offering.

Recruitment Incentive (RI): Upon Entrance on Duty (EOD), you may be eligible to receive a Recruitment Incentive LEAP: Law Enforcement Availability Pay (25% Everyone) RI: Retention Incentive (25% for Caribbean Air and Marine Branch (CAMB) Locations, Key Largo, FL, Key West, FL, Marathon, FL and Long Beach, CA)
*Retention Incentive is contingent on eligibility.

Eligibility will be determined by Human Resources Duty Locations A duty location will be offered after successful completion of the pre-employment process.

The duty location listed in the final offer letter may include any geographic location within the Southwest Region, Southeast Region or Caribbean Air and Marine Branch.

Note: Your opportunity for final selection is increased based on your flexibility to Enter on Duty at priority duty location.

Current possible duty locations include: Southeast Region: Fort Lauderdale, Miami and Marathon, FL and CAMB: Fajardo, Mayaguez, Ponce, and San Juan PR; and Saint Thomas, VI Northern Region: Bellingham, WA Limited Duty Locations as of – 1 2/1/2025 Applying to this JOA does not guarantee any of the locations listed below will still be available once you've completed the pre-employment process.

Locations are offered based on the current needs of the service at that time.

Northern Region: Port Huron, MI Southeast Region: Houma, LA Southwest Region: San Diego, CA Duties and Responsibilities As a Marine Interdiction Agent, you will perform marine-based law enforcement operations for the detection, prevention, interdiction, and apprehension of terrorists, terrorist weapons, and other contraband and persons from illegally entering or attacking the United States.

Typical duties may include: Monitoring behavior patterns and activities of suspect persons, vehicles, or vessels believed to be engaged in illegal activities.

Interpreting radar data to calculate appropriate intercept while tracking vessels and people to a successful interdiction.

Searching persons, vessels, baggage, and cargo for contraband or weapons incidental to detention or arrest.

Collecting, refining, and analyzing strategic and tactical intelligence.

Qualifications This GS-11 grade level position has a selective factor: As a minimum qualification requirement all candidates must have a qualifying Merchant Mariner Credential.

See the U.S.

Coast Guard Issued Merchant Mariner Credentials (MMC) section that is listed below for qualifying capacities.

You qualify for the GS-11 grade level if you possess one (1) year of specialized experience equivalent to at least the next lower grade level, performing duties such as: Independently applying advanced skill in controlling/commanding law enforcement scenes to include conducting searches, making arrests, processing arrests and seizure of evidence and property.

Conducting investigative inquiries using various techniques, examining files and records, physical and documentary evidence to identify logical conclusions.

Utilizing cameras and other electronic high-tech surveillance equipment to gather evidence, collect, evaluate, and then preserve that physical and documentary evidence.

Highly skilled in writing comprehensive arrest, criminal and incident reports.

Assisting government or state attorneys in preparation for court cases or grand juries, testifies as a law enforcement officer in court proceedings, and administrative forums.

Considerable experience applying arrest authorities and constitutional law in various alleged criminal situations, or knowledge and experience of CBP laws, regulations, policies, legal precedent.

OR GS-11 Education Substitution for experience: A Ph.D.

or equivalent doctoral degree, three (3) full years of progressively higher-level graduate education leading to such a degree, or LL.M.

OR Combining Experience and Education: A combination of successfully completed post-bachelors' education (above) and experience.

This will be calculated using your resume and unofficial transcripts submitted with your application.

AND U.S.

Coast Guard Issued Merchant Mariner Credentials (MMC): You must submit a valid, legible copy of your Merchant Mariner Credential at time of application.

Your copies must include the expiration and capacity pages of your MMC.

Qualifying Capacities are Operator of Uninspected Passenger Vessel (OUPV), Mate of 200 gross tons or greater (Inland, Great Lakes, Near Coastal or Oceans), Chief Mate, Second Mate, and Third Mate Unlimited Oceans or Master of 25 GRT or greater (Inland, Great Lakes, Near Coastal or Oceans) OR An Accepted MMLD Application: You must submit proof an accepted MMLD application, for a MMC with a qualifying capacity, and a credential status that is in a positive standing.

It cannot be pending additional information for MMLD application process.

You must have your Official MMC Credential in hand at the time of scheduling and at assessment appointment.

NOTE: Your resume must explicitly indicate how you meet this requirement, otherwise you will be found ineligible.

Please see the "Required Documents" section below for additional resume requirements.

Other Requirements Citizenship : You must be a U.S.

Citizen to apply for this position.

Residency : You must have had primary U.S.

residency (includes protectorates as declared under international law) for at least three of the last five years.

Age Requirement: In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions.

Candidates must be referred for selection to the Border Patrol Agent position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03.

The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C.

8336(c) or Title 5 U.S.C.

8412(d).

AGE WAIVER: Creditable law enforcement officer service
- Covered by Title 5 U.S.C.

8336(c) or Title 5 U.S.C.

8412(d), or creditable service covered by Title 5 U.S.C.

8401(36) (as a Customs and Border Protection Officer) on or after July 6, 2008, may be applied toward the maximum age requirement.

This age restriction may not apply if you are currently serving in a federal civilian (not military) law enforcement position covered by Title 5 U.S.C.

8336(c) or Title 5 U.S.C.

8412(d).

Veterans' Preference Eligibility
- To ensure compliance with statutes pertaining to the appointment of preference eligible veterans as determined by the Merit Systems Protection Board in its decision Isabella v.

Dept of State, the maximum age for original appointment articulated above shall not apply to the hiring of individuals entitled to veterans' preference eligibility under 5 U.S.C.

3312.

You must submit proof of Veteran's Preference (DD-214 Member 4 Copy) at the time of application.

Training : This position has a training requirement.

You may be required to successfully complete the training requirement as a condition of employment.

Failure to successfully complete the required course(s) of training in accordance with CBP standards and policies will result in placement into either a former or different position, demotion, or separation as determined by management and appropriate procedures.

Travel Required: You may be expected to travel for this position based on operational needs.

How to Apply Click the Apply button on this site.

You will be linked to the CBP Talent Network registration page.

For Position of Interest select Air and Marine Operations (Marine Interdiction Agent (MIA)), then complete the pre-screening questions.

You'll then receive a link(s) to the MIA Job Opening Announcements (JOAs) on USAJOBS, the federal government's official employment site, to complete your application.

Be certain to review ALL details of the job opening announcement and follow all instructions in the application process.

As a subscriber to the CBP Talent Network, you'll receive monthly emails with information about webinars, career expos, and future opportunities with AMO and CBP.

IDR is hiring for a 6 Month Contract to Hire Technical Product Owner

Join a leading organization in the data technology sector, where innovation and agility drive success. This fully remote role offers the opportunity to influence key data engineering initiatives, collaborating across diverse teams to deliver impactful digital products. If you're passionate about data solutions, thrive in fast-paced environments, and possess a strong technical acumen, this is your chance to make a difference and grow your career.

Position Overview for the Technical Product Owner:

• Act as a pivotal link between Data Engineering teams and business stakeholders to facilitate successful technology delivery across digital products

• Manage and prioritize data engineering product backlog, ensuring alignment with organizational objectives

• Author user stories and acceptance criteria, leading refinement sessions and sprint planning

• Lead Agile ceremonies including daily standups, sprint reviews, and retrospectives to ensure smooth delivery

• Utilize data and AI tools to analyze issues, optimize workflows, and maintain high quality in product artifacts

Requirements for the Technical Product Owner:

• Proven experience in stakeholder interaction and managing product backlogs in an Agile environment

• Strong documentation skills and the ability to communicate complex technical requirements effectively

• Proficiency with SQL, data engineering processes, and related technologies such as Azure SQL, Data Factory, SSIS, and Azure Data Lake

• Familiarity with Microsoft tech stack and data delivery tools is highly preferred

• Solid understanding of data engineering concepts and successful delivery of technical products

What's in it for you?

• Opportunity to work remotely with flexible hours, supporting a dynamic team that values innovation and autonomy

• Competitive pay rate of $60-68/hr, leading to an annualized salary of approximately $135,000 + 10% STIP

• Be part of a company with a strong focus on data-driven solutions and cutting-edge technology adoption

• Gain hands-on experience with AI-driven processes and advanced data engineering tools

Why IDR?

• 25+ Years of Proven Industry Experience in 4 major markets

• Employee Stock Ownership Program

• Dedicated Engagement Manager who is committed to you and your success

• Medical, Dental, Vision, and Life Insurance

• ClearlyRated's Best of Staffing® Client and Talent Award winner 12 years in a row.

REMOTE

Who we are:

Atkore is forging a future where our employees, customers, suppliers, shareholders, and communities are building better together - a future focused on serving the customer and powering and protecting the world.

With a global network of manufacturing and distribution facilities worldwide, Atkore is a leading provider of electrical, safety and infrastructure solutions.

Who we are looking for:

We are currently looking for a BIM Technician to be based out of Tampa, FL reporting to the Drafting Manager. This person will be responsible for working with the project team to develop accurate and complete modeling drawing sets. The BIM Technician will ensure the integrity of project drawings while maintaining privileged information per the customer and company requirements.

What you'll do:

• 
  
• Accurately identify product specifications and understand of detail assemblies and their application for installation.
  
• Create or revise/update construction drawings, maintaining a tracking log of drawings.
  
• Review drawings for accuracy and scope of work, ensuring quality of final drawings.
  
• Collaborate with team and customers to ensure that projects are successfully completed, and best practices/technical issues are addressed.
  
• Run the multi trade coordination for clashes to assist project team with the design process.
  
• Conduct clash detection and visual walkthroughs using Navisworks Manage.
  
• Research ways to continuously improve our process including providing insight into new time saving methodologies and best practices.
  
• Manage, maintain, and update BIM Project documents.
  

What you'll bring:

• 
  
• Bachelor's (preferred) or Associates Degree in Architecture, Engineering, and Construction (AEC) related field with 1 to 3 years of industry experience.
  
• 1+ years' experience in 3D Revit or 3D AutoCAD.
  
• Technical certificates in Drafting and ED BIM Modeling training (preferred).
  
• Experience with Autodesk Revit, CAD, and BIM procedures (Preferred).
  
• Familiarity with Overhead coordination process including 3D Modeling utilizing Revit in project environment, Project As-builts and turnover for Facility management.
  
• Experience with Microsoft Office Suite, CAD and BIM systems including Autodesk AutoCAD, Revit Suite, BIM 360, Veo, Bluebeam, Word, Excel, and PowerPoint.
  

Within 3 months, you'll:

• 
  
• Complete the onboarding material and training on companies' products and drafting processes.
  
• Collecting information from multiple plans and incorporating them into a model which can be used to build structural support.
  
• Produce 2D shop drawings and 3D models projects with assistance of PM and BIM Designer.
  
• Complete Atkore Immersion process.
  

Within 6 months, you'll:

• 
  
• Communicate effectively with PM's and other team members in order to gather the information needed for each project.
  
• Develop strong knowledge of the companies' products and produce accurate designs based on each project needs.
  
• Assist with BIM Designer to coordination meeting and be part of BIM project development at different phases: modeling, cleaning clashes and producing shop drawings.
  

Within 12 months, you'll:

• 
  
• Produce structural models and drawings using Revit and manage coordination projects.
  
• Manipulate and develop CAD library components for AutoCAD and Revit or other related software.
  
• Independently handle BIM project from start to finish by assisting to BIM Coordination, performing clash detection, and resolving coordination issues.
  

Atkore is a recipient of a Great Place to Work certification and a Top Workplaces USA award! We're committed to creating an engaged and aligned workforce that drives collaborative culture. Our team strives for breakthrough results, stays focused on being standout leaders, and fully supports decisions of the Company. We consistently live the Atkore mission, strategic priorities, and behaviors, all in a way that's consistent with our core values. Together, we build strong leaders that continually endeavor to move us forward.

With a global network of manufacturing and distribution facilities worldwide, Atkore is a leading provider of electrical, safety and infrastructure solutions.

Join our team and align yourself with an industry leader!

Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities

The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c)

SUMMARY DESCRIPTION:

The R&D Testing Technician will execute daily engineering test assigned by Engineering Manager. The candidate will perform various acoustical, mechanical, and electrical tests. The candidate will support the engineers in their ongoing R&D testing to achieve their task on time. The candidate should be well organized, has strong attention to details and able to work in fast paced environment

SPECIFIC DUTIES AND RESPONSIBILITIES:

• Perform engineering tests including and not limited to: Acoustical testing, mechanical testing and electrical testing
• Documenting and archiving test results and test procedures
• Work with various mechanical tools and fixtures to conduct tests
• Work with electronic test equipment
• Manage the engineering lab, make sure tools and equipment are arranged in the right spot and perform 5S to the labs
• Manage engineering samples with proper labels and arrange them in cabinet
• Support engineers in new developed test procedures by documenting the test procedures
• Support engineers in shipping samples out to customers, purchase experimental parts from website

POSITION REQUIREMENTS:

• Associate’s degree in engineering, Electronics, or equivalent work experience
• Ability to set up and utilize electronic test equipment such as multimeters, oscilloscopes, and run LabVIEW code
• Ability to work with various fixtures and tools to conduct various testing
• Able to multi-task and work fast paced environment to meet deadlines
• Attention to detail and organized
• Excellent communication skills
• Self-motivated and eager to learn
• Ability to follow instructions
• Basic knowledge of computers, spreadsheets, and power point

REPORTING RELATIONSHIPS:

Reports to: Sr. Manager Application Engineering – MedTech & Specialty Audio

• This is a standalone position with no direct reports and no embedded EHS team
• Reports directly to Mike, Global Director of Quality
• Acts as the primary EHS point of contact for the site
• Leads daily morning safety meetings with Production Managers, Supervisors, and the Director of Operations
• Works cross-functionally with Operations, HR, and Leadership but operates with a high degree of autonomy
  
  

• Independent and self-directed role
• Minimal day-to-day oversight; success depends on ownership and initiative
• Expected to take the lead on investigations and decision-making
• Collaborative environment when proposing or implementing improvements
  
  

• Lead and manage incident and accident investigations independently
• Partner with HR on workers’ compensation claims and related documentation
• Facilitate and lead daily safety meetings
• Maintain and manage internal safety tracking tools and spreadsheets
• Ensure existing EHS processes and procedures are followed and sustained
• Serve as the on-call safety contact as needed (rare weekend involvement)
  
  

• Champion and promote a strong safety-first culture across the site
• Identify hazards and implement preventative measures
• Develop, update, or write new safety practices and procedures as needed
• Drive safety awareness through training, communication, and leadership presence
• Collaborate with operations and leadership on safety improvements and initiatives
  
  

• Combination of proactive and reactive work
• Fast-paced manufacturing/production environment
• Mix of plant floor presence and administrative work
• High visibility role with frequent interaction across departments
• Workload requires strong prioritization and comfort managing multiple processes
  
  

• Bachelor’s degree in Environmental Health & Safety, Industrial Safety, or related field preferred
• 5+ years of progressive EHS experience in a manufacturing or industrial environment
• Proven experience leading investigations independently
• Strong working knowledge of OSHA and applicable safety regulations
• Ability to influence without authority and work effectively in a standalone role
• Strong communication, organization, and leadership skills
  
  

• Comfortable working independently with minimal oversight
• Confident decision-maker who takes ownership of safety outcomes
• Able to balance immediate reactive needs with long-term proactive improvements
• Respected presence on the production floor
• Passionate about building and sustaining a strong safety culture in a food manufacturing setting
  
  

LaSalle Network is an Equal Opportunity Employer m/f/d/v.

All assignments are at-will and their duration is subject to change.

Job Title: Electrical Engineer II

Location: Schaumburg, IL (100% Onsite)

Duration: 12 Months

Schedule: Full-Time | 9:00 AM - 5:00 PM

• 
  
• 
  

  Design, build, debug, and test RF circuits for wireless communication products.

  
  
  
• 
  

  Operate and analyze results using RF test equipment such as Network/Spectrum Analyzers, Signal Generators, and Power Meters.

  
  
  
• 
  

  Support RF product redesign efforts through performance validation and troubleshooting.

  
  
  
• 
  

  Collaborate with cross-functional engineering teams to improve product performance and reliability.

  
  
  
• 
  

  Document test results, validate compliance with engineering standards, and maintain technical records.

  
  
  

• 
  
• 
  

  2+ years of RF engineering experience with hands-on circuit design and wireless communication theory.

  
  
  
• 
  

  Proven experience using RF test equipment (Network Analyzer, Spectrum Analyzer, Signal Generator, Power Meter).

  
  
  
• 
  

  Knowledge of RF amplifier design, PLL, VCO, receivers, and RF communication systems.

  
  
  
• 
  

  Strong troubleshooting and analytical problem-solving skills.

  
  
  
• 
  

  Bachelor's Degree in Electrical Engineering or related field.

  
  
  

• 
  
• 
  

  Experience with LabVIEW or RF testing software tools.

  
  
  
• 
  

  Background working in RF hardware R&D or telecom equipment manufacturing.

  
  
  
• 
  
  

Reporting to the VP, Brand Integrity, Ethics and Investigations, the Senior Counsel, International Trade Compliance is an experienced compliance lawyer responsible for advancing and managing the Company’s economic sanctions, customs, and export controls compliance programs and enabling compliance with ever-changing and complex global requirements. Such individual is responsible for continually assessing the Company’s sanctions and export compliance risk and in conjunction with other key stakeholders updating, designing and implementing appropriate controls to mitigate such risks.

The individual will have extensive interaction with other members of the Legal Team, the Senior Leadership Team, business teams, as well as with numerous other internal organizations.

Responsibilities

The Senior Counsel, International Trade Compliance is responsible for serving as the internal subject matter expert on applicable global laws and regulations pertaining to economic sanctions, customs and export controls and their impact on the Company’s business (e.g., OFAC, ITAR, and EAR). Such individual is also responsible for developing, enhancing, and implementing the Company’s international trade and export compliance programs and associated procedures to enable compliance with applicable laws and regulations. Such duties will include the following:

• Identify and manage sanctions, customs, and export control compliance issues, escalate and remediate as appropriate;
• Advise the business on sanctions, customs, and export controls compliance, risks, and risk mitigation.
• Conduct sanctions, customs, and export compliance risk assessments and recommend changes to applicable policies and procedures;
• Lead trade and export compliance investigations and manage submissions and disclosures to governmental entities as required;
• Provide oversight to business units highly dependent upon trade, customs or export compliance programs (e.g., ITAR);
• Develop appropriate sanctions, trade and export compliance training for relevant stakeholders.
• Monitor proposed sanctions and export compliance laws and regulations and provide advice to business stakeholders regarding implications and requirements; and,
• Implement robust compliance tools (including policies, procedures, manuals and as appropriate IT solutions), to enhance the Company’s trade and export compliance controls, and otherwise support the Company’s Ethics and Compliance program and initiatives.

Qualifications

• JD from an accredited law school.
• Member in good standing of the bar of at least one U.S. state.
• A minimum of 5 years focusing on trade, customs and export compliance, sanctions, or related matters.
• A minimum of 7 to 10 years of professional experience assessing/investigating alleged or actual regulatory/legal or ethical concerns.
• Strong negotiation and presentation skills, as well as excellent analytical ability.
• Excellent verbal and written communication skills, including the ability to explain complex legal and regulatory concerns to non-legal stakeholders.
• Demonstrated ability to lead programs/projects.
• Ability to effectively lead cross-functional teams, effectively collaborate, and work independently on projects, from conception to completion, and must be able to work under pressure at times to manage a wide variety of activities and confidential matters with discretion.

OTHER VALUED EXPERIENCE

• In-house experience.
• Significant experience with the Arms Export Control Act and its implementing regulations, the International Traffic in Arms Regulation and 22 CFR parts 120-130.
• Significant experience and ability serve as the internal subject matter expert regarding the Federal Acquisition Regulation
• Flexibility and willingness to adapt and grow in an expanding organization.
• Commitment to compliance and integrity.
• Experience implementing and administering standard trade compliance software solutions.
• Ability to collaborate among all levels of the organization and business.
• Self-starter who can develop effective networks with internal customers and external stakeholders.
• Strong time management, prioritization, analytical, and organizational skills, with ability to meet deadlines and achieve desired results.
• Excellent customer relationship, communication, and people skills.
• Adaptable and capable of managing multiple initiatives, both collaboratively and independently.
• Experience in the application of non-U.S. export control and sanctions regulations.

What you’ll experience working for ULS

UL Solutions has been pioneering change since 1894 and we’re still leading the way. From day one, we’ve blazed a trail protecting the planet and everyone on it. Our teams have influenced billions of products, plus services, software offerings and more. We break things, burn things and blow things up. All in the name of safety science.

That’s where you come in — because none of it could happen without you. It takes passion to protect people, problem-solving to safeguard personal data and conviction to make the world a more sustainable place. It takes bold ideas and brilliant minds to build a better world for future generations across the globe.

This is more than a job. It’s a calling. A passion to use our expertise and play our part in creating a more secure, sustainable world today — and tomorrow. As a member of our safety science community, you’ll use your ideas, your energy and your ambition to innovate, challenge and ultimately, help create a safer world.

Everyone here is unique. But we’re also a global community, working together to help create a safer world. Join UL Solutions and you can connect with the brightest minds in the business, all bringing their distinct perspectives and diverse backgrounds together to deliver real change.

Empowering our customers to keep the world safe means thinking ahead. It means investing in training and empowering our people to learn and innovate. At UL Solutions, we help build a better future — one where everyone benefits.

Join UL Solutions to be at the center of safety. To learn more about us and the work we do, visit

Total Rewards: We understand compensation is an important factor as you consider the next step in your career. The estimated salary range for this position is $180,000 to $230,000 and is based on multiple factors, including job-related knowledge/skills, experience, geographical location, as well as other factors. This position is eligible for annual bonus compensation with a target payout of 20% of the base salary. This position also provides health benefits such as medical, dental and vision; wellness benefits such as mental and financial health; and retirement savings (401K) commensurate with the standard rewards offered in each individual location or country. We also provide full-time employees with paid time off including vacation (15 days), holiday including floating holidays (12 days) and sick time off (72 hours).

Title: Quality Supervisor

Location: Chicago Metro Area

Industry: Metal Manufacturing / Industrial Components

Compensation: $75K – $85K

Position Overview

A growing manufacturing organization in the Chicago metro area is seeking a Quality Supervisor to lead daily quality operations within a production environment. This role will oversee inspection processes, support quality assurance initiatives, and partner with manufacturing and engineering teams to ensure products consistently meet customer and regulatory standards.

This position is ideal for a hands-on quality professional with experience in metal manufacturing or stamping who enjoys working closely with production teams and driving continuous improvement.

Key Responsibilities

• Supervise daily activities of the quality department and inspection personnel
• Provide coaching, guidance, and training to quality team members
• Ensure products meet internal specifications and customer requirements
• Support root cause analysis and corrective action initiatives
• Analyze quality and production data to determine product acceptability
• Collaborate with manufacturing and engineering teams to resolve quality issues
• Prepare reports and data summaries for management review
• Support internal and external quality audits
• Maintain quality documentation and inspection records
• Utilize precision measuring tools and inspection equipment to verify product conformance

Qualifications

• 3+ years of experience in a manufacturing quality role
• Prior experience leading or mentoring quality personnel preferred
• Experience in metal stamping, machining, or metal component manufacturing strongly preferred
• Knowledge of quality core tools (PPAP, FMEA, SPC, MSA, APQP)
• Ability to read blueprints, GD&T, and piece prints
• Experience using measuring equipment such as calipers, micrometers, and optical comparators
• Strong communication and problem-solving skills
• Ability to work cross-functionally with engineering and production teams

Work Environment

This role operates in both an office and manufacturing environment and requires regular interaction with production teams. Occasional travel to customer or supplier locations may be required.

TekPro is partnered with a precision machining manufacturer in the Chicago area that is looking to add a Process Engineer to their team. Our client offers modern CNC equipment, a clean and organized facility, and the opportunity to work on complex precision machined components.

This role is ideal for someone with experience in a precision machining environment who enjoys developing manufacturing processes, working with engineering and production teams, and supporting the launch of new parts into production.

Key responsibilities include:

• Developing detailed manufacturing process plans for new parts using SolidWorks for modeling and drafting and Visual Manufacturing (ERP) for documentation
• Reviewing customer purchase orders, drawings, and specifications to ensure all requirements are incorporated into the manufacturing process plan
• Ensuring manufacturing process plans comply with all drawing, purchase order, and specification requirements
• Reviewing existing tooling and gage inventory for use in the manufacturing process
• Designing and ordering new tooling when necessary
• Working closely with manufacturing teams to troubleshoot and resolve production issues as they arise
• Supporting continuous improvement of manufacturing processes and production efficiency

If you have experience in manufacturing engineering or process engineering within a CNC machining environment and are interested, apply now to learn more!

ABSOLUTELY NO SPONSORSHIP OF ANY KIND -- PLEASE DO NOT APPLY -- NO VISAS OR ANY TYPE OF SPONSORSHIP

Quality Manager

Must have strong experience in automotive manufacturing quality leadership (IATF 16949 OR TS 16949)

Position Overview

The Quality Manager leads the site’s quality function and ensures that products consistently meet internal standards and customer requirements. This role is responsible for managing quality personnel, driving continuous improvement initiatives, supporting production teams, and maintaining compliance with applicable quality systems and industry standards. The position works cross-functionally with operations, engineering, and leadership to maintain product integrity and address quality-related concerns throughout the manufacturing process.

Key Responsibilities

• Lead and develop the plant’s quality team by providing guidance, training, and ongoing performance feedback to ensure departmental goals are achieved.
• Direct daily quality activities including product inspections, issue resolution, and verification that manufactured products meet required specifications.
• Review and coordinate responses to customer and internal corrective actions, ensuring appropriate investigation, documentation, and follow-through.
• Analyze quality and production data to identify trends, investigate root causes, and support improvements to manufacturing processes.
• Partner with manufacturing and engineering teams to resolve product quality issues and improve overall process capability.
• Evaluate finished products and production processes to determine compliance with specifications, standards, and customer expectations.
• Investigate testing or measurement concerns by verifying calibration and functionality of inspection equipment and coordinating necessary corrective actions.
• Organize and interpret inspection results, historical quality data, and production records to support problem solving and decision-making.
• Communicate quality performance metrics through reports, charts, presentations, or other analytical tools for leadership review.
• Maintain and support the organization’s quality management system by ensuring policies, procedures, and documentation remain current and effective.
• Facilitate meetings or discussions focused on quality improvement initiatives, corrective actions, and process performance.
• Participate in internal and external quality audits and assist with follow-up actions to address findings or recommendations.
• Utilize a variety of inspection and measurement tools including micrometers, calipers, optical comparators, and related quality equipment.
• Maintain accurate documentation and records associated with quality activities and compliance requirements.
• Promote a clean, organized, and safe working environment while following company policies and operational procedures.
• Perform additional responsibilities as needed to support operational and business objectives.

Qualifications

• High school diploma or equivalent required; additional technical training or education related to quality, manufacturing, or engineering preferred.
• Previous experience in a quality leadership or supervisory role within a automotive manufacturing environment.
• Background in metal stamping, precision manufacturing, or similar industrial production processes is strongly preferred.
• Working knowledge of industry quality methodologies and core tools such as PPAP, FMEA, MSA, SPC, and APQP.
• Ability to interpret blueprints, technical drawings, GD&T, and product specifications.
• Proficiency using inspection and measurement equipment including calipers, micrometers, optical comparators, and vision systems.
• Strong analytical skills with the ability to evaluate data, identify trends, and drive corrective actions.
• Effective communication skills with the ability to collaborate across departments and clearly convey quality expectations.

Work Environment & Physical Requirements

• Position operates in both office and manufacturing environments.
• Requires the ability to stand, walk, bend, and move throughout a production facility.
• Use of hands and visual inspection tools required during portions of the workday.
• Occasional exposure to moving machinery or industrial equipment.
• Ability to travel periodically to customer or supplier locations when required.