Engineering Structures Elsevier Jobs in Yarrow Point, WA

City of Kirkland

$46.92 - $55.20 Hourly

Kirkland, WA

Seasonal

202100717

Planning & Building - Inspection

01/22/2026

Continuous

Non-Exempt

N/A

Note: This is an On-Call position that is not eligible for benefits.

Being an on-call employee means that your work schedule is not guaranteed, hours worked could range from 0 - 40 hours a week, depending on office needs. All hours worked are subject to Department of Retirement Services and Affordable Care Act reporting requirements. More information will be shared during the interview, and we encourage questions about the program.

• Inspect buildings and structures to ensure compliance with laws, codes, and regulations relating to building construction, mechanical systems, plumbing systems, state energy code requirements, local zoning requirements, and job site erosion control.
• Investigate compliance complaints and, if necessary, mediate a resolution.

• Conducts site inspections of new and old commercial and residential buildings and structures to ensure compliance with approved plans and codes, notes violations. Approved plans will be reviewed, are posted on the construction site, and are reviewed by the inspector to see that they are properly implemented. Reinspects to ensure all noted violations have been corrected. The incumbent has the authority to stop work on a construction site if code violations are not corrected and makes the final approval of a structure prior to occupancy.
• Plans and schedules routes in order to ensure the most efficient use of time.
• Answers questions and provides technical advice related to building and structure code compliance.
• Investigates and responds to complaints regarding code compliance; informs individual making the complaint if a violation occurred and, if so, what corrective action has been taken.
• Logs daily inspections and prepares inspection reports.
• Reads special inspection reports for compliance and files reports.
• Inspects sites for grading and soil excavation or other land modifications. Makes a visual survey of the construction site to determine if a licensed survey is to be required for setback verification.
• Responds to public and contractor inquiries concerning interpretation of the National Electrical and related codes, construction problems, and City administrative procedures. This requires clear, concise, oral and written communication skills.
• Monitors construction to see that it is completed before occupancy of the building, the permit expires, or sees that the permit is renewed in a timely fashion.
• Maintains adequate records to assure proper documentation of inspections.
• Inspects nonstructural problems with building sites, such as surface water problems and inadequate access, and assures that they are corrected or referred to the appropriate City department.
• Position requires daily use of computer. Incumbent must have, or be able to learn, basic keyboard and computer skills.
• Performs daily inspections of vehicles to include checking tires and lights and determining if service is necessary.
• Fosters a positive and supportive work environment; promotes diversity, equity, inclusion, and belonging in the workplace, contributing to an environment of respectful living and working in a multicultural society.

• Attends staff meetings to discuss Building Department and City issues and to discuss changes in policy and codes.
• The incumbent is expected to perform as an emergency worker in the event of a disaster.
• Performs functions as assigned in the City's emergency response plan in the event of an emergency.

• Knowledge of local, state, and regional/international building codes.
• Considerable knowledge of the standards and practices of building construction, mechanical systems, plumbing systems.
• Maintains knowledge of the various changes in local, state, and regional/international building codes which are of technological changes in building materials and changing architectural philosophies. This will require attendance at college-level courses and/or trade seminars as they become available, provided they are necessary to achieve objectives.
• Knowledge of construction techniques and material.
• Must have or be able to learn basic keyboard and computer skills.
• Skill in reading and understanding blueprints and drawings.
• Skill in interpreting codes.
• Skill in organizing and prioritizing tasks.
• Must be able to communicate orally and in writing in a clear, concise, and diplomatic manner.
• Communication and interpersonal skills as applied to interaction with engineers, architects, coworkers, supervisor, the general public etc. sufficient to exchange or convey information and to receive work direction.
• Must be able to navigate typical construction sites which involve walking, climbing ladders/scaffolding, crawling, and being exposed to inclement weather conditions.

Minimum Qualifications:

• Education: High school diploma or GED.
• Experience: 3 years of construction or inspection experience.
• Or: In place of the above requirements, the incumbent may possess any combination of relevant education and experience which would demonstrate the individual's knowledge, skill, and ability to proficiently perform the essential duties and responsibilities listed above.

• Must have a valid Washington State Driver's license and ability to remain insurable under the City's insurance to operate motor vehicles.
• Possess and maintain ICC Residential Building Inspector (B1) certification within 1 year.
• Must have good oral and written communication skills.

Physical Demands and Working Environment:
The position is driving to or being at construction sites a majority of the time. Potential hazards at construction sites might include falling objects, loose footing, and construction equipment. The position may be required to climb ladders, occasionally walk on scaffolding, crawl in crawl spaces, and be exposed to inclement weather and adverse conditions. The incumbent is expected to perform as an emergency worker in the event of a disaster.
Positions in this class typically involve indoor and outdoor work in extreme variable temperature and atmospheric conditions. Duties may require extended periods of talking or listening, climbing, balancing, stooping, kneeling, crawling, reaching, standing, walking, fingering, feeling, and seeing. Incumbents may be subjected to being around moving mechanical parts, vibration, fumes, odors, gasses, poor ventilation, inadequate lighting, work space restrictions, intense noises, and travel.
Work typically includes exerting up to 50 pounds of force occasionally and/or up to 35 pounds of force more frequently, and/or negligible amount of force constantly to move objects.
This position encounters foot hazards as defined by the WAC, which may include any of the following: falling objects, rolling objects, piercing/cutting injuries, or electrical hazards.

Position requires a resume and cover letter for consideration of application. Please note how you meet minimum qualifications within the cover letter. Applicants who are selected for next steps in the hiring process will be invited by phone or e-mail. Candidates are encouraged to apply at the earliest possible date as screening, interviewing, and hiring decisions will be made through the recruitment period, until such time as the vacancy is filled. First review of applicants will be 15 days after original posting date.

The City of Kirkland is a welcoming community where every person can thrive and grow. We value diversity, inclusion, belonging, and work together to support our community. We do this by solving problems, focusing on the customer, and respecting all people who come into the City whether to visit, live, or work. As an Equal Opportunity Employer, we are committed to creating a workforce that does not discriminate on the basis of race, sex, age, color, sexual orientation, religion, national origin, marital status, genetic information, veteran status, disability, or any other basis prohibited by federal, state or local law. We encourage qualified applicants of all backgrounds and identities to apply to our job postings. Persons with a disability who need reasonable accommodations in the application or testing process, or those needing this announcement in an alternative format, may call or Telecommunications Device for the Deaf at 711.

About the Company

Trelleborg is a world leader in engineered polymer solutions for almost every industry on the planet. And we are where we are because our talents brought us here. By specializing in the polymer engineering that makes innovation and application possible, Trelleborg works closely with leading industry brands to accelerate their performance, drive their business forward—and along the way, shape the industry and progress that will benefit humankind in the exciting years ahead. Our people are Shaping Industry from the Inside. Why don´t you join us?

About the Role

A production supervisor is responsible for overseeing and managing the daily operations of a manufacturing department that specializes in thermoforming, using specialized equipment, paint and finishing aerospace goods. They ensure production targets are met efficiently, products meet quality standards and safety protocols are followed. Additionally, they often lead and motivate a team of workers, allocate resources and communicate with higher level management to optimize production processes.

Responsibilities

• Supervision: Oversee and manage the day-to-day operations of a production team, ensuring they meet production targets and quality standards.
• Resource Allocation: Assign tasks and resources to workers, ensuring that equipment, materials and personnel are used effectively.
• Quality Control: Monitor and enforce quality control processes to maintain product quality and compliance.
• Safety Compliance: Ensure that all safety protocols and regulations are followed.
• Training and Development: Train new employees, provide guidance and facilitate employee development.
• Production Scheduling: Create and manage production schedules to meet demand.
• Problem-Solving: Address production issues, equipment malfunctions and process inefficiencies in a timely and effective manner.
• Reporting: Maintain production records, track key performance indicators (KPI's) and generate reports.
• Cost Control: Monitor and control production costs to stay within budget and improve efficiency.
• Communication: Collaborate with other departments to ensure a smooth flow of materials and information.
• Conflict Resolution: Address conflicts or challenges within the production team and work toward positive resolutions.
• Adherence to Regulations: Ensure compliance with industry regulations, company policies and environmental standards.
• Team Leadership: Provide leadership to the production team and motivate employees.
• Documentation: Maintain accurate records of production activities, safety measures, maintenance and employee performance.
• Lean Manufacturing: Implement lean manufacturing techniques and promote a culture of continuous improvement.

Qualifications

• Bachelor's degree or qualifications in a related field is preferred.
• A minimum of 1 year of experience in a supervisory or leadership role within a manufacturing environment is required.

Pay range and compensation package

The final compensation offered to the candidate may be based on geographical location, work experience and/or skill level.

Compensation range: $80,000-$95,000 annually

Additions to the compensation packing, including but not limited to paid time off, insurance benefits and 401(k) eligibility, will be outlined at the time of the job offer.

• 401(k) matching
• Dental Insurance
• Employee assistance program
• Flexible spending account
• Health Insurance
• Health savings account
• Life insurance
• Paid time off
• Tuition reimbursement
• Vision insurance

Equal Opportunity Statement

As an EEO/Affirmative Action Employer all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran or disability status. This position requires the use of the information which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be US persons within the meaning of ITAR. ITAR defines a US person as a US citizen, US Permanent Resident (i.e. Green Card Holder), Political Asylee or Refugee.

Company Overview

Founded in 1976 and headquartered in Redmond, Washington, MicroSurgical Technology's passion is creating exceptional surgical devices and instruments used to restore or improve sight for patients all over the world. MST is part of UK based Halma PLC, a global company whose healthcare division helps provide technologies and solutions that enhance the quality of patients’ lives.

Our products are surgeon-designed and meticulously crafted to instill confidence and assurance in Cataract and Glaucoma procedures and include a wide range of surgical instruments such as forceps, scissors, hooks, spatulas, and knives, all designed for the delicate and intricate procedures required in microsurgery.

Together, we create a place where we are successful, motivated by our mission and inspire each other. This is where you can do your best work!

Senior Manufacturing Engineer

Responsibilities:

• Design new and revise existing tools and fixtures for assembly, test, and inspection
• Create test protocols for qualifying new products and assemblies
• Develop and document IQ, OQ, PQ and maintenance protocols for new equipment and fixtures
• Develop and implement automation/semi-automation equipment and fixtures
• Participate in Material Review Board, evaluate and disposition discrepant material, conduct failure root cause analysis, develop rework and repair methods, identify and document corrective and preventative action
• Create engineering design and process change orders with required documentation, technical justification/change effects analysis, and impact to operations
• Create, document, and conduct training and certifications for fixture/equipment operation, and critical methods
• Revise existing product designs for improvement or new line extensions
• Develop test equipment and methods for mechanical, electrical, hydraulic, and pneumatic devices and systems
• Develop and maintain production assembly, test, and inspection procedures through product life cycle
• Develop verification and validation protocols for equipment and processes, including validation of cleaning, packaging, and sterilization
• Develop automated data collection and reporting methods
• Lead production process quality improvement
• Determine training and certification requirements for assemblers and technicians for production processes and equipment
• Provide product failure analysis support for customer complaints and returns
• Workflow design, yield improvement, waste reduction, time and motion efficiency studies
• Create and maintain Product and Process FMECA through product life

Requirements:

• Bachelor’s degree in Engineering (Manufacturing, Mechanical, or equivalent) with 5-7 years of experience in medical device manufacturing or related manufacturing environment
• Direct experience in medical device or highly regulated environment
• Certified SolidWorks Associate or 3+ years of equivalent experience
• Microsoft Office applications, Excel power user
• Proficiency with inspection tools and methods
• Solid understanding of design change requirements and processes in FDA regulated manufacturing environment
• Ability to perform Gage R & R Analysis for equipment qualifications
• Ability to use Design of Experiments methods to support process improvement

Desirable Skills and Experience:

• Experience with metal machining and fabrication and finishing methods and equipment
• Swiss watch or jewelry manufacturing industry with insights into small tools, equipment, techniques
• Experience with color anodizing, electropolishing, chemical etching, laser etching
• Clean room, aqueous cleaning, and sterilization qualification and monitoring
• Lean manufacturing process implementation or support
• Mechanical specification using GD&T
• Quality analysis using MiniTab

Salary range for this position is $120k-$145k per year which is the general base range for a successful candidate in the State of Washington. The successful candidate’s actual pay will be based on various factors such as skills, qualifications and experience.

This role is also eligible for a competitive benefits package that includes medical, dental, vision, life, and disability insurance; 401K retirement plan; flexible spending and health savings account; paid holidays; paid time off; parental leave; employee assistance program and other company benefits.

MicroSurgical Technology Inc. is an equal opportunity employer and does not discriminate based on gender, sex, age, race and color, religion, marital status, national origin, disability, sexual orientation, gender identity or expressions, veteran status, or any other category that is protected by applicable law.

Please note that only qualified candidates will be contacted for further consideration.

No Recruiters or Agencies Please

Trident Consulting is seeking a " Manufacturing Technician " for one of our clients in " Bellevue, WA". A global leader in business and technology services.

Please find additional details about the role below:

Job Title: Manufacturing Technician

Location: Bellevue, WA (Onsite)

Pay rate: $35/hr on W2 (All Inclusive)

Type of Hire: Contract

Contract Duration: 6+ Months

Hours: 6:00am - 2:30pm PST

Description:

Performs a variety of equipment operating and kitting duties such as assembling, filling, cleaning, inspecting, labeling, packaging, etc. to make and process products to meet high quality specifications following prescribed procedures. Working from verbal and written instructions. May use a variety of equipment including, scales, bottle filler, Peristaltic/Digistaltic pumps, sealers, torquer and other related supplies. May use measuring instruments to ensure conformance to specified tolerance. Makes supervisor aware of quality issues and taking corrective action where possible. Works under general supervision, with instruction given for routine work and detailed instructions for new types of work or special projects. Requires basic knowledge of how the team is organized and how own tasks relate to the others in the team/ unit. Impacts team performance through reliability and accuracy of own work.

Qualification Requirements:

- High School diploma or GED equivalent

- 3-5 years of relevant work experience

- Ability to read, follow and understand operating procedures

- Ability to read, speak and understand English

- Capable of doing basic math and counting to large numbers without error

- Willingness to learn multiple production operations and adjust quickly to new tasks

- Needs to be able to communicate effectively both in writing and verbally to report production information

- Capable of working a full shift at a designated operation within the assigned manufacturing area

- Sufficient computer related skills to perform data entry and print reports

- Works under close supervision at first and demonstrates the potential to work with less supervision over time.

Essential Job Requirements: Standing/reaching/bending/twisting/being able to lift 35 lbs

About Trident:

Trident Consulting is an award-winning IT/engineering staffing company founded in 2005 and headquartered in San Ramon, CA. We specialize in placing high-quality vetted technology and engineering professionals in contract and full-time roles. Trident's commitment is to deliver the best and brightest individuals in the industry for our clients' toughest requirements.

Some of our recent awards include

• 2022, 2021, 2020 Inc. 5000 fastest-growing private companies in America
• 2022, 2021 SF Business Times 100 fastest-growing private companies in Bay Area

Job Title: Estimator

Sunset Grill Construction: Company Overview & Culture

At Sunset Grill Construction, we are not building projects—we’re building excellence. We attract elite performers who demand more from themselves than anyone else ever could. We’re a team of high achievers. We’re excited to welcome likeminded people to our team.

We are a company where:

·       Growth is our mission.

·       Details are everything.

We are looking for solution-focused, self-motivated, forward thinkers who obsess over the details and make everything they touch better than they found it. This is where you come to grow, to stretch, to be challenged, and to become the best version of yourself—1% better every single day.

Experience isn’t required.

We don't care what you’ve done before; we care about what you're willing to do now. If you can succeed here, you will be financially and professionally rewarded beyond your expectations.

To succeed at SGC, you must be:

·       An executor with a zero-excuse mindset

·       Obsessed with outcomes

·       Unflinchingly organized, with extreme ownership of every task

·       A master communicator who sees every angle, every risk, and every opportunity

·       Educated— Heavy Equipment Operating

Education: Bachelor’s degree in Construction Management, Engineering, Architecture, or a related field (preferred but not required). Recent graduates are welcomed to apply.

Requirements:

·       Proven experience as a construction estimator or similar role.

·       Strong knowledge of construction materials, processes, and costs.

·       Proficiency in estimation software such as Procore, or equivalent.

·       Solid understanding of bid process and estimating

·       Strong math, analytical, and problem-solving skills.

·       Excellent attention to detail and organizational skills.

·       Ability to work independently and meet deadlines under pressure.

·       Strong written and verbal communication skills.

Job Type: Full-Time

Pay: Depends on Experience + Commission

Benefits:

• Paid time off (PTO)
• Health Insurance
• Ongoing training and professional development

Role and Responsibilities

We are seeking a detail-oriented and experienced Construction Estimator to join our team. The Estimator will be responsible for preparing accurate cost estimates for construction projects by analyzing blueprints, specifications, proposals, and other documentation. This role is essential to ensure competitive, profitable, and precise project bids that align with company standards and client expectations.

1.       Analyze drawings, specifications, and other documentation to prepare time, cost, materials, and labor estimates.

2.       Conduct quantity take-offs and develop detailed cost breakdowns.

3.       Solicit pricing from subcontractors and suppliers.

4.       Evaluate and compare subcontractor bids to ensure completeness and competitiveness.

5.       Collaborate with CFO.

6.       Develop and maintain cost databases and historical data for benchmarking and budgeting.

7.       Assist in the preparation of bid proposals and presentations.

8.       Identify potential cost risks and suggest value engineering alternatives.

9.       Stay up to date with market trends, labor rates, and material pricing.

10.  Attend pre-bid meetings and site visits as necessary.

ABOUT US

Lake Washington Partners is driven by a mission to build one of the US’s great real estate portfolios. Co-founded by brothers Jordan and Jeremy Lott in 2006, our portfolio spans 11.6M square feet and 49 buildings across 10 states including urban and suburban office buildings, diverse industrial properties, and multi-family apartments under our Refound Residential brand. Each of our properties is a testament to our commitment to quality, efficiency, and long-term success.

We are a private, family-owned company guided by respect, honesty, integrity, collaboration, and longevity. These core values guide every decision we make and relationship we build. We believe greatness comes from the right blend of financial success, operational excellence, and social responsibility because our actions impact not just our investors and employees, but the broader community around us. That’s why we drive to be not only good at what we do, but good for those we serve.

POSITION SUMMARY

The Associate Project Manager is responsible for supporting and advancing construction projects throughout all phases of planning, design, bidding, construction and closeout. This position exercises independent judgment, analytical thinking and proactive problem solving to ensure projects remain aligned with scope, schedule and budget objectives.

The Associate Project Manager partners closely with Project Managers and Project Administrator while taking ownership of assigned responsibilities, demonstrating initiative, strong organizational capacity, and the ability to manage multiple priorities in a dynamic environment.

PRIMARY DUTIES & RESPONSIBILITIES

Project Planning & Design Support

·        Coordinate preparation of internal project documentation in support of Construction Management and Project Management teams.

·        Assist in defining scope, budget, and schedule for assigned projects.

·        Support the design and permitting process, including drawing review, permit application preparation, and value engineering.

·        Apply construction divisions and category codes to budgets and bid packages as applicable.

Bidding, Documentation & Project Controls

·        Prepare bid comparisons, accurately summarizing project scope and comparative costs to past projects.

·        Oversee organization and tracking of project components, including submittals, RFIs, bid packages, project schedules, and change orders.

·        Partner with the Project Administrator to review and process required paperwork and documentation from contractors, subcontractors, and vendors, including contracts, certificates of insurance, proposals, and lien releases.

Financial Administration, Closeout & Compliance

·        Partner with the Project Administrator to process invoices and payment applications for review and approval.

·        Monitor billing accuracy, contract reconciliation, and compliance with lien waiver requirements.

·        Support and help facilitate the project closeout process, ensuring projects are closed out in a timely and comprehensive manner.

·        Support the needs and requirements of the Company and adhere to established project management methods, procedures, and quality objectives.

Perform other duties as assigned.

JOB SKILLS & ABILITIES

·        Strong analytical, organizational, and problem-solving skills with the ability to manage multiple concurrent projects.

·        Ability to exercise sound judgment and make informed recommendations.

·        Computer knowledge and proficiency, including MS Office. 

·        Knowledge of Microsoft Project preferred.

·        Knowledge of Yardi Construction Module and Yardi PayScan preferred.

·        Demonstrate the flexibility to handle frequent schedule, priority &/or process changes.

·        Offers exceptional customer service to internal and external customers and vendors.

·        Ability to exemplify company values in all aspects of job performance.

·        Strong written and verbal communication skills with the ability to articulate questions and requirements clearly; directing the project remotely as needed.

·        Detail oriented; demonstrating the ability to multi-task and appropriately manage time and workload.

·        Asks pertinent questions, solves problems and is able to find the best solution.

·        Must maintain an excellent attendance and punctuality record. Must be available to back up team members and work a flexible schedule as needed.

·        Ability to keep a positive, supportive attitude towards the Company, job, customers, and co-workers.

·        Demonstrates the ability to take initiative and work both independently as well as with a team.

·        Ability to travel to LKWP properties and job sites locally and/or domestically on occasion.

EDUCATION &/OR EXPERIENCE

·        Associate’s Degree in Construction Management, Engineering, Project Management or equivalent combination of education and construction industry experience. 

·        Bachelor’s Degree preferred.

·        2-3 years of experience supporting construction projects in engineer or other support role. 

·        Knowledge of construction details and drawings as well as building operations and systems.

·        Proficient computer software skills, including typing and data entry skills.

Position: Associate Project Manager

Reports to: PMO Manager

Department: Construction Project Management

Position Location: Bellevue, WA

Salary Range: $80,170 - $100,000, depending on experience.

Bonus: Eligible for an annual discretionary bonus.

Benefits:

·        Comprehensive medical, dental, and vision benefits

·        Financial protection through short/long-term disability, life, AD&D insurance

·        401(k) plan with company match of $1 for $1 up to 4% of earnings, matched & vested at every pay cycle

·        A paid time off program and paid holidays

·        Paid parental leave

• Applicants must successfully pass a drug test and background check, which will be conducted in accordance with applicable state and local laws. 

Airgas is Hiring for a Welding Repair Technician, Woodville or Seattle WA!

At Airgas, we are committed to building a diverse and inclusive workplace that embraces the diversity of our employees, our customers, patients, community stakeholders and cultures across the world.

We are looking for you!

$27-$34

Recruiter: Tina Kratochwill

Job Description

Welder Repair to service and maintain engine-driven and electric welders and related equipment while ensuring a safe work environment. This role involves repairing, testing, and maintaining equipment, ordering parts, and performing preventative maintenance, etc.

Essential Duties and Responsibilities:

• Responsible for adherence to company policies including safety and the use of personal protective equipment.
• Repairs and refurbishes all Electric and Engine Drives.
• Assembles electric, diesel, gas, and propane equipment for rental.
• Tests and calibrates machines to see if they are functional for rent or sale.
• Repaints parts, touches up paint, and puts decals on welders to maintain general appearance.
• Replaces defective parts and completes preventative maintenance required.
• Orders parts as required in order to complete repairs.
• Inspects returned equipment for proper operation and/or damage by the customer.
• Operates a forklift, pallet jack or other necessary equipment to stock required parts in the shop.
• Ensures a clean and organized work environment at all times.
• Prepares and completes paperwork for all machine repairs.
• Occasionally required to service equipment and customers off-site.
• Maintains communication with all branch personnel.
• Occasionally advises customers regarding best equipment for their projects.
• Airgas associates are expected to act with care, adapt to our environment and engage to trust and
• grow - core tenets within the Be, Act, Engage framework of employee performance.
• All employees are expected to perform any reasonable work request that falls within the qualifications but not specifically described.

REQUIRED KNOWLEDGE, SKILLS AND ABILITIES (KSA's)

• Maintains a valid drivers’ license and a good driving record to comply with Airgas driver qualification policy for operating an Airgas vehicle in the field as necessary.

Required Education:

• Post-secondary education equivalent to a one year Technical College or equivalent is an asset.

Required Length and Type of Experience:

• At least 3 years of Mechanical Knowledge preferred
• Working knowledge of positioning equipment, welding application and equipment is preferred.
• SAP or similar software system experience.
• Intermediate skills operating a computer in Google Workspace is recommended.

WORK ENVIORNMENT

• Because we are committed to our drivers and their safety, Airgas has a video driver safety program that is used to help reduce the risk of collisions and injuries to you and the community. Our program also helps us protect associates and the company from fraudulent claims.

Cosmetic Compliance Consultant- Dental Whitening Products

Key Responsibilities:

1. Develop and lead global regulatory strategies for cosmetic and borderline products, ensuring alignment with FDA, EU MDR, and other international requirements.

2. Conduct comprehensive gap assessments against cosmetic, OTC, and product safety regulations; determine required technical documentation and assess existing files for deficiencies.

3. Prepare, review, and submit regulatory documentation, including PIFs, CPSRs, 510(k) submissions, PMAs, Technical Files, and Design Dossiers.

4. Create and manage remediation plans to close gaps in product documentation, regulatory submissions, and internal processes.

5. Evaluate regulatory impact of product, supplier, or process changes, conduct gap analyses, and coordinate necessary notifications or filings.

6. Lead audit readiness efforts, representing the organization during FDA inspections, Notified Body audits, and responding to CAPAs with robust documentation.

7. Review and approve labeling, IFUs, promotional materials, and packaging in accordance with 21 CFR Part 801, EU MDR Annex I, and cosmetic regulations.

8. Manage UDI compliance, EUDAMED submissions, PMS, vigilance reporting, and adverse event investigations per ISO 13485 and ISO 14971.

9. Act as primary liaison with FDA, Notified Bodies, and regulatory authorities; provide mentorship on regulatory intelligence and best practices.

Competency:

1. Proficient in MS Office, Excel Macros/VBA, PLM tools (e.g., Windchill), QMS platforms, and RegTech systems (MasterControl, RIMS); strong skills in Excel/SQL for data analysis and tracking.

2. Deep expertise in FDA, EU MDR/IVDR, ISO 13485, ISO 14971, regulatory intelligence, and risk management

3. Strong analytical aptitude, exceptional attention to detail, excellent stakeholder management, and advanced technical writing skills

Education/Experience:

1. Bachelor’s degree in Engineering, Regulatory Affairs, Biomedical Engineering, Life Sciences, Pharmacy, or related discipline (RAC certification preferred).

2. 8+ years of experience in cosmetic compliance with hands-on experience in dental/whitening products, borderline classifications, OTC/GPSR, safety reports, PIFs, safety assessments, and international regulatory requirements.

3. Proven ability to collaborate as a regulatory SME, delivering practical, customized compliance solutions.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Integral Fuel Cell Assembly (In- Tank Mechanic) to join our Join and Installation team in Everett and Renton, Washington.

As an Integral Fuel Cell Assembly (In-Tank Mechanic), you will play a vital role in ensuring the highest standards of quality and safety while working within the confined spaces of aircraft fuel tanks. This position requires assembling and installing structural components, systems, and sub-assemblies to meet stringent quality requirements. You will be responsible for verifying kitted parts, performing drilling, riveting, and bonding, as well as assembling plumbing and electrical systems within the tank. Your attention to detail will be crucial as you conduct continuity checks, perform necessary rework, and ensure that all installations comply with specifications. Please note that this role involves working in tight spaces, including entering the wing through a approximately 9.5" x 17.7" opening; therefore, comfort with confined spaces is essential for success in this position.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Assemble and install parts, structural components, systems, and sub-assemblies to meet quality requirements for wing and horizontal stabilizer assemblies.
• Review bar charts or automated timelines to determine job assignments and obtain necessary drawings.
• Locate work areas using drawings, installation plans, or other paperwork that specifies airplane and section numbers.
• Obtain and verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects.
• Retrieve parts from the Parts Control Area or other designated locations if they are not pre-picked, ensuring they meet specifications.
• Obtain a two-way radio and confined space flag before working in confined spaces, adhering to Communications System for Confined Hazardous Areas (CSCHA) rules and regulations.
• Perform drilling, reaming, riveting, cold working, bonding, grounding, and sealing as necessary to complete work assignments.
• Assemble and install aircraft plumbing and electrical systems within closed areas of the wing and horizontal stabilizer, ensuring compliance with specifications.
• Perform pickup and rework, incorporating changes and conducting functional checks on work typically installed by lower classifications.
• Perform continuity checks for electrical systems and hand form electrical wiring and soldering as necessary for work assignments.
• Perform final cleaning and closing of fuel cells, including vacuuming and installing fuel cell doors.
• Locate and pre-install routing and clamping hardware for in-wing fuel tank electrical and plumbing systems as required.
• Use precision measuring instruments to verify that quality standards are achieved.
• Report job handicaps, such as errors in sequencing, parts, materials, and assembly procedures, following shop procedures.
• Check work after completion of each operation to ensure assembly is complete and free of defects and remove and replace installations and related components as necessary.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
• Work in environments that may involve contact with metals, solvents, and coolants.
• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
• Adapt to varying noise levels and atmospheric conditions.
• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.F.R. § 120.15 is required. "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process. Failure to complete the assessment will remove you from consideration.

Basic Qualifications (Required Skills/Experience):

• 1+ years of structural experience in aerospace, automotive, maritime, construction or similar industry; this can include education and military.
• 1+ years experience following oral and written instructions in the form of blueprints, drawings, work instructions.
• 1+ years of experience using high impact vibratory tools; such as bucking/riveting.
• Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel; wear hearing protection (ear inserts, canal caps, earmuffs); eye protection, and use hazardous chemicals.
• Ability to lift up to 35lbs.
• Ability to work in Confined Spaces (work within or pass through). Entry diameter 9.5"X17.7".
• Proficiency in reading, writing, and speaking English.

Preferred Qualifications:

• 1+ years of experience performing aircraft structural work or equivalate.
• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

This position offers relocation based on candidate eligibility.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift:

This position is for a variety of shifts.

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Apr. 10, 2026

Language Requirements

English Preferred

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes (BCA) is seeking Senior Assembly Advisement Workplace Coaches (Level 4) to join 737 Skill Enhancement Center team located in Renton, Washington.

Position Responsibilities:

• Uses manufacturing and assembly experience in one or more of these areas: mechanical, fluids/pneumatics, electrical integration, quality inspection, machine operations for coaching, performance improvement and problem solving in support of the Boeing Production System
• Analyze and interpret performance and quality data to identify and mitigate the impact of changes on the production system. (e.g. CMES, CORRS, PAS, EPES, TMC, Velocity, Webart)
• Conduct assessments of processes and practices, analyzes and interprets data for improvement opportunities
• Provide feedback on assessment results and find opportunities for improvement and potential areas of risk
• Analyze processes and support Boeing Production System problem solving, develop and document innovative solutions in support of area Q.C.D.S.M. goals
• Assist M&Q managers and team leads with Structured On the Job Training (SOJT) plans
• Support training and coaching solutions to improve employee performance
• Provide Subject Matter Experts for specific M&Q Skills/Disciplines
• Provide instruction, positive modeling, and opportunities for observation in order to help team members and employees. Encourage questions to ensure understanding. Gives timely, appropriate feedback on performance when coaching. Reinforces efforts and progress
• Clarify expected behavior, knowledge, and level of proficiency by seeking, giving information, and checking for understanding
• Establish good interpersonal relationships by helping team members and making internal employees feel valued, appreciated, and included in discussions
• Work at the appropriate level in the organization to implement strategies and plans
• Self-sufficiency, working under minimal direction

Basic Qualifications (Required Skills/Experience):

• 5+ years of experience with Structures Assembly, Mechanical Assembly, Electrical Assembly, and/or Final Assembly
• 10+ years of experience working in a manufacturing environment
• Ability to work 2nd shift

Preferred Qualifications (Desired Skills/Experience):

• 10+ years of experience with aircraft assembly processes, performing hands-on installation and/or assembly is desired (or an equivalent combination of education and experience as outlined above)
• Demonstrated knowledge and expertise in aircraft assembly and inspection processes is critical
• Experience and proficiency reading and interpreting blueprints, drawings, specifications, and templates
• Proficiency with MS Office applications
• Excellent analytical, communication, and problem-solving skills
• Possess manufacturing experience in one or more of the following areas:
  • Mechanical
  • Fluids/Pneumatics
  • Electrical Integration
  • Structures

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Shift:

This position is for 2nd shift.

Total Rewards:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range: $112,000 to $135,000

Applications for this position will be accepted until Mar. 20, 2026

Export Control Requirements:

This is not an Export Control position.

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 2nd shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.