Engineering Structures Elsevier Jobs in Fl
891 positions found — Page 5
This is a highly responsible position that supports the health, safety and welfare of Tribal members and the public.
The incumbent in this position is responsible for managing the regulation and inspection of building construction, electrical, mechanical, and plumbing installations and directing compliance and enforcement of all related federal, state and local ordinances of the Seminole Tribe of Florida (STOF).
Work involves technical review of all types of construction drawings, plans, and specifications to ensure compliance with applicable codes and ordinances.
The incumbent provides general oversight, management, and leadership to building inspectors, plans examiners, and permit technicians as required and is responsible for the issuance of all permits and Certificates of Occupancy in accordance with the Florida Building Code and Tribal administrative policy.
The person is also responsible for the administration of the Tribe's elevator and commercial structure annual inspections programs.
The individual works closely with the Director of the Tribal Inspector's Department to support all departmental programs and initiatives, including but not limited to the development of the departmental budget and strategic plans, development of building inspections processes and programs, evaluation and improvement of service delivery systems, and administration of the Tribe's Unsafe Structures Ordinance Program.
The incumbent may attend Tribal Council meetings or other community meetings and works with all necessary stakeholders to resolve complaints, address concerns, or solve problems as needed.
Bachelor's degree in Engineering, Building Construction, Civil Engineering, Architecture or related field is required.
Master's degree is preferred.
A minimum of ten (10) years of experience as an Architect, Engineer, Building Inspector, Build Code Administrator, or Construction Superintendent with at least five (5) years being in a supervisory capacity is required; or, any equivalent combination of education, experience and training will be considered.
Prior experience with EnerGov software system is preferred.
Possession and maintenance of a Building Code Administrator certification by the Florida Building Code Administrators and Inspector's Board is required.
Possession of a valid Florida Driver's License is required.
Must have excellent organizational and interpersonal skills including the ability to clearly communicate complex ideas in English both orally and in writing.
Must be able to respond and commit to full duty operations during Hurricane or other emergency events.
Demonstrate proficiency with Microsoft software programs.
Demonstrate excellent organizational and interpersonal skills including English written and oral communication skills are required.
Ability to travel and work a flexible schedule including evenings, weekends and holidays.
Job Description
The Production Manager, Heavy Steel Fabrication, 2nd Shift is a manufacturing leadership role responsible for driving operational excellence, throughput, and safety across multiple departments in a heavy steel fabrication environment. This Production Manager position focuses on lean manufacturing, continuous improvement, labor planning, and fabrication efficiency while leading cross functional teams to achieve safety, quality, delivery, and cost objectives. The role requires strong engineering acumen, experience in structural steel fabrication or heavy manufacturing, and the ability to manage complex production processes on a 2nd shift schedule.
Responsibilities:
- Lead and manage multiple production departments within a heavy steel fabrication facility, ensuring safe and efficient operations across assigned shifts
- Drive lean manufacturing initiatives, including 5S, waste reduction, Kaizen events, and continuous improvement programs to increase throughput and operational efficiency
- Collaborate with Production Scheduling to execute manufacturing schedules and proactively identify capacity gaps, bottlenecks, and process constraints
- Plan and allocate labor resources to optimize productivity, minimize downtime, and meet fabrication and delivery deadlines
- Monitor and improve key performance indicators such as safety, quality, on time delivery, scrap reduction, and cost control
- Ensure teams operate within established fabrication plans, welding procedures, and quality standards, while implementing process improvements as needed
- Maintain compliance with Environmental Health and Safety regulations, enforce EHS policies, and promote a strong safety culture on the production floor
- Coach, mentor, and develop area leads and production supervisors, conducting performance evaluations and supporting employee development
- Partner with Human Resources on recruiting, onboarding, training, performance management, and employee relations matters
- Maintain accurate production documentation, reporting metrics, and operational records to support manufacturing performance analysis
Qualifications:
- Bachelors degree or Associate degree in Industrial Engineering, Manufacturing Engineering, Supply Chain Management, Operations Management, or a related technical field, or equivalent experience
- Proven experience in heavy steel fabrication, structural steel manufacturing, or industrial manufacturing environments
- Strong background in lean manufacturing, Six Sigma, continuous improvement, and process optimization
- Demonstrated experience developing and implementing operational improvement programs that increase efficiency and throughput
- Knowledge of production planning, capacity planning, labor management, and manufacturing cost control
- Experience leading production teams, supervisors, and hourly employees in a fast paced fabrication setting
- Solid understanding of welding processes, fabrication workflows, and quality control in a heavy manufacturing environment
- Strong analytical, organizational, and problem solving skills with the ability to manage complex operations
- Excellent communication skills and leadership ability, with experience in coaching and performance management
Desired Qualifications:
- Professional certifications in Lean Manufacturing or Six Sigma, such as Green Belt or Black Belt
- Experience in multi shift manufacturing operations with cross shift communication and coordination
- Familiarity with ERP systems, production scheduling software, and manufacturing performance reporting tools
- Knowledge of financial metrics, budgeting, and cost analysis within a manufacturing environment
- Experience leading safety initiatives and behavior based safety programs in an industrial setting
No third-party candidates or solicitation will be accepted at this time.
Project Manager - Concrete Floors
The Project Manager will be responsible for planning, sequencing, directing, and executing all construction activities associated with large commercial and industrial concrete projects. This includes structural foundations, CIP elements, vertical work, slab systems, and project-wide coordination. The role ensures safe execution, technical compliance, production performance, and schedule integrity.
KEY RESPONSIBILITIES:
- Develop and maintain detailed project schedules, including pour sequencing and multi-scope coordination.
- Oversee field operations and ensure all work meets engineering specifications and quality standards.
- Coordinate mobilizations, site logistics, equipment, and access requirements.
- Review and interpret engineering drawings, slab details, reinforcing plans, and geotechnical information.
- Oversee concrete placement operations, mix design coordination, QC testing, curing methods, and tolerance requirements.
- Manage subcontractors, vendors, and onsite crews while maintaining schedule and budget alignment.
- Ensure compliance with OSHA standards, safety plans, industry standards, and project-specific requirements.
- Review and manage RFIs, submittals, shop drawings, and technical documentation.
- Track production, labor, materials, rentals, and daily job performance.
- Lead coordination efforts with the GC, engineering teams, testing agencies, and suppliers.
- Manage punch lists, closeout documentation, and project turnover.
TECHNICAL REQUIREMENTS:
- Strong knowledge of structural concrete, foundations, CIP columns, vertical work, slab systems, formwork, shoring, reshoring, and bracing.
- Understanding of high-tolerance slab finishing, sequencing, curing, and testing requirements.
- Ability to read and interpret detailed construction documents and technical specifications.
- Proficiency with project scheduling and construction management software.
- Familiarity with safety standards, SWPPP requirements, and large-site logistics.
QUALIFICATIONS:
- Minimum 7 years of experience managing commercial or industrial concrete projects.
- Demonstrated ability to lead multi-scope, multi-phase operations.
- Strong communication, leadership, and organizational skills.
About the Role
We are seeking a Backend Engineer to help build and maintain the backend services and API’s that power our proprietary AI SaaS CRM and LMS platforms.
You will work directly with our CTO, collaborate with the engineering team, and partner closely with our Product Manager to design, implement, and maintain scalable backend systems.
Our backend services are built primarily with:
- NestJS (TypeScript)
- Python
- Deployed across multiple AWS environments
This is a hands-on backend engineering role focused on API development, cloud deployment, distributed systems, and production-grade reliability.The role has meaningful ownership - not just ticket execution.
What You’ll Do
- Work directly with the CTO on backend design and implementation decisions
- Partner closely with a Product Manager on sprint planning, backlog grooming, translating product requirements into technical solutions, and prioritizing customer-impacting improvements
- Design, build, and maintain backend API services using NestJS (TypeScript)
- Build and support backend services in Python
- Develop and maintain production-grade RESTful APIs
- Contribute to multi-environment deployments across AWS
- Use Terraform to manage our IAC
- Work with CI/CD workflows and structured deployment procedures
- Follow and contribute to engineering documentation including development guidelines, environment configuration standards, security practices, and versioning and changelog management
- Implement and support asynchronous and event-driven systems
- Write clean, maintainable, well-tested code
- Participate in code reviews and maintain high engineering standards
- Debug and resolve production issues across distributed cloud environments
What We’re Looking For (Required)
- 5+ years of backend engineering experience
- Strong proficiency in TypeScript and experience with NestJS
- Strong proficiency in Python
- Experience designing and implementing RESTful APIs
- Experience deploying and maintaining applications in AWS
- Familiarity with multi-environment deployments (dev, staging,UAT, production)
- Experience working with CI/CD pipelines
- Experience with relational databases (PostgreSQL)
- Familiarity with Docker or containerized workflows
- Experience working in GitHub-based workflows in a collaborative environment (pull requests, code reviews, branching strategies, and issue tracking)
- Comfortable working in an agile environment with JIRA and Monday
- Strong communication and problem-solving skills
- Experience building SaaS or multi-tenant platforms
Nice to Have / Strong Plus
- Familiarity with C# & C++
- Experience with Dentrix, OpenDental, or other dental integration PMS’s
- Experience building a greenfield SaaS or B2B software
- Experience with building on a Healthcare platform
- Familiarity with AI-enabled products or LLM integrations
- Experience with Redis or caching strategies
- Experience integrating third-party APIs
Why This Role Is Different
- Direct collaboration with the CTO on backend system design
- Close partnership with Product Management
- Opportunity to help shape a modern, AI SaaS platform for the healthcare industry
Lead Millwork Estimator
Build the Best Preconstruction Team in Florida
Location: Miami, FL (In-Person)
Department: Preconstruction / Estimating
Reports to: Founder & CEO
AWM Group is a high-end custom architectural millwork company delivering complex interior environments for luxury residential, hospitality, and commercial projects. As we scale, we are building a world-class preconstruction organization—and we are looking for a senior leader to own and elevate it.
This is not a takeoff-only role. This is a leadership position.
Own and professionalize AWM’s estimating and preconstruction function. This role is responsible for building and leading a scalable, best-in-class estimating department—leveraging people, process, and technology to set a new standard for the millwork industry in Florida.
Your mission:
To build and manage a scalable estimating organization that uses talent and technology to become the best preconstruction team in the millwork industry in Florida—accurate, fast, strategic, and deeply aligned with AWM growth plan.Key Responsibilities
Department Leadership
- Lead and structure the estimating function
- Define standards, templates, and workflows
- Build a scalable preconstruction system
- Mentor and grow junior estimators
Project Estimating
- Perform detailed takeoffs and pricing for custom millwork
- Analyze drawings, specs, and design intent
- Identify risks, gaps, and constructability issues early
- Develop clear scopes, assumptions, and alternates
Strategic Preconstruction
- Partner with Sales, PMs, Engineering, and Operations
- Align estimates with real production and installation methods
- Improve hit rate without eroding margin
- Build historical cost data and feedback loops
Client & GC Interface
- Support clarifications, value engineering, and precon conversations
- Help position AWM as a professional, reliable partner
Ideal Candidate
- 8–15+ years in architectural millwork estimating
- Deep understanding of custom casework and specialty interiors
- Strong grasp of materials, fabrication, and installation drivers
- Strategic thinker—not just a counter of parts
- Experience building systems and mentoring others
- Clear communicator with leadership presence
- Spanish a plus
Technology & Systems Proficiency (Required)
- Extremely proficient with document-sharing and collaboration platforms
- Fully fluent in:
- Microsoft Office (Excel, Word, Outlook)
- Google Workspace (Docs, Sheets, Drive)
- Comfortable working inside ERP and CRM systems
- Expert user of digital takeoff and markup tools, including:
- Bluebeam Revu (required)
- Other takeoff platforms a plus
- Able to organize, version, and control large volumes of drawings and data with precision
Location & Work Style
- Full-time, in-person role based in Miami, Florida
- Candidate must live in South Florida or be willing to relocate
- Close collaboration with leadership, engineering, and operations
- Occasional project and factory visits
Compensation
Base Salary: $110,000 – $150,000 per year
(Commensurate with experience and leadership level)
Performance incentives tied to hit rate, margin quality, and preconstruction excellence.
If you are a senior millwork estimator who wants to build something enduring—not just price jobs—AWM is the place to do it.
For Top Performers Ready to Step Out of the Machine — and Help Build One
If you're currently managing or estimating drywall and acoustical ceiling projects at a large subcontractor, you already know the structure:
Layers of management. Limited influence over company direction. Minimal visibility into executive decision-making. Advancement tied more to tenure than impact.
This opportunity is different.
HDZ Builders, Inc. is a certified General Contractor in South Florida actively scaling its Division 9 operations. We are seeking a proven Drywall & ACT Project Manager / Estimator who wants more than just managing assigned projects—they want to help build and lead a growing operation.
This role is ideal for top performers from firms such as KHS&S, Lotspeich, Precision Walls, Acousti Engineering, FL Crane, West Star Interiors, Ford Drywall, and similar contractors who are ready for the next level of responsibility, influence, and career growth.
What Makes This Role Different
This is not a maintenance role. This is a growth role.
You will work directly with company leadership and play a key role in expanding Division 9 operations within a certified General Contractor positioned for rapid growth through public and private sector opportunities.
Your performance, decision-making, and leadership will have direct and visible impact on the company’s trajectory.
High performers in this role can grow into senior leadership positions as the company scales.
About HDZ Builders, Inc.
HDZ Builders is a fully insured and bondable certified General Contractor specializing in:
- Division 9: Metal framing, drywall, and acoustical ceiling systems
- Division 10: Wall protection and specialty accessories
The company holds multiple certifications that provide access to exclusive project opportunities, including:
- Florida DBE (Disadvantaged Business Enterprise)
- Minority Business Enterprise (Hispanic)
- Miami-Dade SBE (Construction and Goods & Services)
- Local Disadvantaged Business (LDB)
- SDVOB Certification (in progress)
These certifications position HDZ Builders for sustained growth in municipal, aviation, healthcare, education, and commercial sectors.
Your Impact
You will operate in a hybrid estimating and project management capacity with significant autonomy and ownership.
Key responsibilities include:
- Preparing detailed Division 9 estimates and proposals
- Managing awarded projects from preconstruction through closeout
- Controlling project budgets, schedules, and profitability
- Coordinating subcontractors, vendors, and field execution
- Identifying cost savings, efficiencies, and operational improvements
- Working directly with ownership to help scale Division 9 operations
This role offers the opportunity to influence both project outcomes and operational structure.
Ideal Background
This opportunity is specifically targeted toward experienced professionals currently working at established drywall subcontractors who have strong technical ability and leadership potential but are seeking greater career growth and influence.
Typical candidate profile includes:
- 5+ years managing and/or estimating commercial drywall and ACT projects
- Experience handling projects ranging from $500K to $5M+
- Strong understanding of Division 9 systems, sequencing, and execution
- Proven ability to manage project financial performance
- Strong technical knowledge of estimating and construction operations
Candidates with backgrounds at KHS&S, Lotspeich, Precision Walls, Acousti, FL Crane, West Star, Ford Drywall, or similar firms are highly encouraged to apply.
Career Trajectory
This role offers a clear path toward senior leadership as the company grows, including potential advancement into roles such as:
- Senior Project Manager
- Division Manager
- Director of Operations
Advancement will be based on performance, leadership, and contribution—not tenure.
Compensation & Growth
- Highly competitive compensation based on experience and performance
- Performance-based bonus opportunities
- Leadership growth trajectory aligned with company expansion
- Long-term career advancement opportunity within a growing certified contractor
Who This Role Is Best For
This role is ideal for individuals who:
- Are among the top performers at their current company
- Want greater autonomy and decision-making authority
- Are ready to take on larger responsibility and leadership
- Want to help build and scale a growing construction firm
- Are motivated by long-term career growth—not just maintaining status quo
Confidential Inquiries Welcome
All inquiries will be handled confidentially.
- If you are ready to step into a role with greater ownership, leadership opportunity, and long-term growth potential, we encourage you to apply.
REQUIREMENTS AND PREFERENCES
The Broward County Board of County Commissioners is seeking qualified candidates for Treatment Plant Operator - Water & Wastewater Operations Division
The Treatment Plant Operator for Wastewater, is responsible for the following, including but not limited to: operating equipment related to wastewater treatment plant processes, including aeration tanks, clarifiers, belt filter press, sludge flotation units and digesters under close supervision, and checking equipment to see that it is operating properly; performing minor repairs and adjustments to equipment as needed, and assisting Plant Maintenance Crew on maintenance projects; performing a variety of cleaning tasks in areas or structures, such as chemical rooms, chemical feed equipment, various wastewater treatment units, pumping stations, electrical rooms, secondary containment areas, head house bar screens, and general grounds keeping; having knowledge of the general operating principles and practices and the maintenance requirements of mechanical and electrical equipment similar to the types utilized in waste treatment plants; understanding and following specified operating and recording procedures; analyzing and troubleshooting various issues; performing basic mathematical calculations involving addition, subtraction, multiplication and/or division; learning/performing a variety of work activities associated with the operation and maintenance of a variety of pumps, valves, filters, and related equipment associated with wastewater treatment system
General Description
Performs skilled operational and regulatory work in the testing and treatment of City water in compliance with all applicable regulations and guidelines.
Works under general supervision, independently developing work methods and sequences.
Minimum Education and Experience Requirements
Requires six (6) months experience in operation or maintenance of mechanical, hydraulic, or electrical equipment similar to that utilized in treatment plant operations or completion of the Pre-Apprenticeship program in either Water Operations or Wastewater Operations through Junior Achievement of South Florida.
Special Certifications and Licenses
Must obtain the Class C Water or Wastewater Plant Operator License within two (2) years of hire.
Preferences
- Vocational/Technical School Certification OR Associates Degree in Biology, Chemistry, Engineering, Environmental Science, Water or Wastewater Treatment, Public Admin, or a closely related field.
- Bachelor's Degree in Biology, Chemistry, Engineering, Environmental Science, Water or Wastewater Treatment, Public Admin, or a closely related field.
- Master's Degree in Biology, Chemistry, Engineering, Environmental Science, Water or Wastewater Treatment, Public Admin, or a closely related field.
- Possession of "C" Florida State Operator license in Wastewater
- Possession of "C", "B" or "A" Florida State Operator license in Water
- Possession of "C", "B" or "A" Collection certification in Wastewater
SCOPE OF WORK
Duties and Responsibilities
The functions listed below are those that represent the majority of the time spent working in this class. Management may assign additional functions related to the type of work of the job as necessary.
Understands, implements, maintains and assists the processing of millions of gallons of wastewater entering the plant and following various biological, mechanical and chemical processes to return treated waters meeting state and federal safety standards back into the environment.
Performs routine to complex maintenance and repair duties of water equipment and facilities; collects water samples for testing; performs and records chemical adjustments and laboratory sampling and testing; ascertains treatment performance and quality; monitors and sets chlorine machinery to obtain proper chemical usage readings; operates and maintains pump stations; records daily pump readings, records flows, time of flows, pressures, and chemical usage.
Performs clerical duties, data entry, process control, calculations and runs quantitative and qualitative analysis and interprets data for performance evaluation.
Runs vacuum building system; collects samples from off sight station; receives chemical deliveries on and off sight; maintains and monitors backwash filter.
Checks plant equipment and troubleshoots plant problems; diagnoses, troubleshoots and writes work orders when a malfunction has been discovered; performs frequent rounds checking the status of water and wastewater treatment units, tanks and machines; performs a variety of routine cleaning activities in order to ensure the safety and cleanliness of facility/treatment plant; proper start up and shut down of different tanks and pumps according to conditions and supervisor directives; resets plant to proper operating conditions caused by storms and power outages.
Computes a variety of work orders to document treatment plant activity, request maintenance, repairs, and compile statistics for periodic reports.
Monitors treatment plant operations to ensure compliance with State and County regulations standards and verifies process is operating efficiently and effectively; checks on storage and inventory of chemicals.
Performs related work as assigned.
Competencies- Manages Complexity: Makes sense of complex, high quantity, and sometimes contradictory information to effectively solve problems. Quickly determines the most critical data and focuses analysis there; recognizes even subtle symptoms that indicate problems; probes deeply for root causes; uses systematic problem-solving methods. Well.
- Decision Quality: Makes good and timely decisions that keep the organization moving forward. Swiftly internalizes coaching on routine issues; handles issues confidently after instruction. Leverages rules and procedures to speed up decision making. Confidently and quickly draws on others' expertise.
- Plans and Aligns: Plans and prioritizes work to meet commitments aligned with organizational goals. Outlines clear plans that put actions in a logical sequence; conveys some time frames. Aligns own work with relevant workgroups. Takes some steps to reduce bottlenecks and speed up the work.
- Optimizes Work Processes: Knows the most effective and efficient processes to get things done, with a focus on continuous improvement. Pursues, explores, and develops ways to ensure own work is as effective as possible within all relevant processes. Shares an analysis of process problems with stakeholders; discusses how to resolve the issue.
- Ensures Accountability: Holds self and others accountable to meet commitments. Accepts responsibility for own work, both successes and failures. Handles fair share and does not make excuses for problems. Usually meets commitments to others.
- Communicates Effectively: Develops and delivers multi-mode communications that convey a clear understanding of the unique needs of different audiences. Listens attentively and takes an interest. Keeps others well informed; conveys information clearly, concisely, and professionally when speaking or writing.
- Situational Adaptability: Adapts approach and demeanor in real time to match the shifting demands of different situations. Finds out which situations call for flexibility and responds accordingly; seeks and listens to others' input and feedback on how to adapt approach to changing situations.
WORK ENVIRONMENT
Physical Demands
Physical demands refer to the requirements for physical exertion and coordination of limb and body movement.
Performs light work that involves walking or standing most of the time and involves exerting up to 20 pounds of force on a regular and recurring basis, or skill, adeptness and speed in the use of fingers, hands or limbs on repetitive operation of mechanical or electronic office equipment or tools within moderate tolerances or limits of accuracy.
Unavoidable Hazards (Work Environment)Unavoidable hazards refer to the job conditions that may lead to injury or health hazards even though precautions have been taken.
Involves routine and frequent exposure to toxic/caustic chemicals.
SPECIAL INFORMATION
County Core Values
All Broward County employees strive to demonstrate the County's four core behavioral competencies.
- Collaborates: Building partnerships and working collaboratively with others to meet shared objectives.
- Customer focus: Building strong customer relationships and delivering customer-centric solutions.
- Instills trust: Gaining the confidence and trust of others through honesty, integrity, and authenticity.
- Values differences: Recognizing the value that different perspectives and cultures bring to an organization.
Copyright 2025 Korn Ferry. ALL RIGHTS RESERVED
Americans with Disabilities Act (ADA) ComplianceBroward County is an Equal Opportunity Employer committed to inclusion. Broward County is committed to providing equal opportunity and reasonable accommodations to qualified persons with disabilities. We support the hiring of people with disabilities; therefore, if you require assistance due to a disability, please contact the Professional Standards Section in advance at or email to make an accommodation request.
County-wide Emergency ResponsibilitiesNote: During emergency conditions, all County employees are automatically considered emergency service workers. County employees are subject to being called to work in the event of a disaster, such as a hurricane, or other emergency situation and are expected to perform emergency service duties, as assigned.
County-wide Employee ResponsibilitiesAll Broward County employees must serve the public and fellow employees with honesty and integrity in full accord with the letter and spirit of Broward County's Employee Code of Ethics, gift, and conflict of interest policies.
All Broward County employees must establish and maintain effective working relationships with the general public, co-workers, elected and appointed officials and members of diverse cultural and linguistic backgrounds, regardless of race, color, religion, sex, national origin, age, disability, marital status, political affiliation, familial status, sexual orientation, pregnancy, or gender identity and expression.
Estimator – High-End Commercial Interiors / Hospitality
Miami, FL
$100,000 – $165,000 + Bonus + Great Benefits
Are you a detail-driven estimator who thrives on complex projects and competitive bids?
Join a leading high-end commercial ESOP General Contractor delivering exceptional Class-A office buildouts and luxury hospitality spaces for major clients across South Florida.
I’m looking for multiple Estimator’s who can take ownership of the pre-construction process, from analyzing drawings and scoping projects to building strong relationships with clients and subcontractors. If you enjoy turning complex plans into accurate, competitive bids and influencing projects before they even break ground, this role is for you.
As an Estimator, you will:
- Review architectural, structural, and MEP drawings to scope projects and complete detailed take-offs
- Prepare and manage RFIs, review addenda, and update proposals accordingly
- Collaborate with project teams and clients in weekly coordination meetings
- Provide pre-construction cost analysis using historical data and comparable projects
- Conduct site visits and document existing conditions through photographic reports
- Develop Value Engineering (VE) options and track savings against overall budgets
- Produce clear, comprehensive bid narratives across all trades
- Solicit and evaluate subcontractor bids, ensuring full scope coverage
- Manage the bid timeline from RFP through award
We are ideally looking for:
- Background in Construction Management or Engineering preferred
- Proven estimating experience in interior tenant improvements
- Strong ability to interpret preliminary plans and anticipate scope gaps or conflicts
- Experience building and analyzing project schedules and long-lead items
- Deep understanding of subcontractor scopes and landlord rules/regulations
You’ll work with a range of industry-standard tools to support accurate and efficient estimating, including Procore, PlanSwift, On-Screen Takeoff, Bluebeam, and Excel, using them to analyse drawings, complete take-offs, manage documentation, and build detailed, competitive project estimates.
You will join a team working on high-profile commercial and hospitality interior projects, be part of an employee-owned company (ESOP) where your contributions directly impact the company’s success and collaborate with a highly experienced team in a fast-paced, quality-driven environment.
Interested?
For a confidential conversation, call or text Scott at .
You can also send your updated resume to to learn more.
Job ID: 520372
Leviat, a CRH company, is a global leader in lifting, insulating and connecting technology for the construction industry. The company employs nearly 3,000 diverse, talented employees at 60 locations globally. Leviat's engineered products and innovative construction solutions are used in a variety of market segments from residential, non-residential and infrastructure, enabling users to build better, stronger, safer, and faster. We stand together to REINVENT THE WAY OUR WORLD IS BUILT.
Job Summary
We are seeking a dynamic, passionate, and driven individual to join the team as a Product Manager. Innovative products and services are at the foundation of our company; this position reports to the Head of Product Management and is responsible for supporting the development of a multi-year product strategy across Leviat NA lines of business. A key part of the role is the cross-functional partnership and alignment across Operations, R&D, Sales and Finance. As Product Manager, you will be a change agent, working to define category specific product roadmaps and launch strategies.
Job Location
This role is based out of our office in Riverview, FL - hybrid work schedule after 6 months onsite.
Job Responsibilities
- Develop and manage Tiltup Lifting & Insulating product line roadmap, establishing the value proposition for products and solutions across all markets.
- Lead new product development using Stage-Gate process
- Manage product line life-cycle management including SKU rationalization, complexity reduction, make vs buy analysis, inventory and pricing management supports
- Analyze and benchmark the product offering of key competitors for gaps or opportunities
- Work closely with the Commercial teams to collect and analyze key data about the marketplace including market size, competitive landscape, pricing and product gaps
- Identifying customer needs and represent the voice of the customer
- Lead annual product portfolio review
- Partner with key customers to develop customized solutions to drive innovative
- Support product training
- Support marketing content creation
Job Requirements
This role requires full attention of the candidate & constant communication with our team. We are looking for a passionate, motivated and highly organized individual with self-starting tendencies and a bias towards action. The ideal candidate will feel confident representing the voice and general tone of the company, along with comfortable handling and digesting a large amount of real-time data.
- Bachelor’s degree or advanced degree in business, marketing or engineering
- Minimum 3 years of product management, product marketing or product development experience
- Proven record of launching new successful products
- Proven leadership and strategic capabilities with ability to engage with different stakeholders within a large organization
- Excellent communication skills, with the flexibility and adaptability to liaise with and manage at all levels in organization
- Highly organized and proven project management skills
- High level of analytical and financial acumen, possess the ability to use information and data to develop an informed business case
- Self-motivated, visionary, future-oriented and results driven
- Must be adaptable with ability and willingness to efficiently manage multiple priorities and demands that continuously shift in a dynamic and fast paced environment
- Travel up to 15%
What CRH Offers You
- Highly competitive base pay
- Comprehensive medical, dental and disability benefits programs
- Group retirement savings program
- Health and wellness programs
- A diverse and inclusive culture that values opportunity for growth, development, and internal promotion
About CRH
CRH has a long and proud heritage. We are a collection of hundreds of family businesses, regional companies and large enterprises that together form the CRH family. CRH operates in a decentralized, diversified structure that allows you to work in a small company environment while having the career opportunities of a large international organization.
If you’re up for a rewarding challenge, we invite you to take the first step and apply today! Once you click apply now, you will be brought to our official employment application. Please complete your online profile and it will be sent to the hiring manager. Our system allows you to view and track your status 24 hours a day. Thank you for your interest!
Leviat, a CRH Company, is an Affirmative Action and Equal Opportunity Employer.
EOE/Vet/Disability
- CRH is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, status as a protected veteran or any other characteristic protected under applicable federal, state, or local law.
Tired of playing it safe? Or maybe you’re ready to stop just "running numbers" and start steering the ship of a $100M+ portfolio.
It’s time to move beyond the calculator—and finally own the strategy that wins the work.
This is your opportunity to serve as the architect of our client's preconstruction engine. As Chief Estimator, you aren't just a department head; you are the primary gatekeeper of risk, the master of pricing strategy, and the right hand to the President. We are looking for a heavyweight leader who can navigate the complexities of South Florida’s municipal and private markets, transforming raw data into winning GMP and Design-Build recommendations.
It doesn’t stop at Chief Estimator: We aren’t just looking for a technician; we are looking for a pivotal leader. Our client is a multi-generational, family-owned powerhouse that has grown from 10 employees to over 200 by betting on the right people. We want a master of execution who can mentor the next generation of estimators while presenting final budgets directly to Ownership with total authority.
Why You'll Love This Role
- Command the Precon Lifecycle – Total oversight from early conceptual budgeting through the final handshake. You own the standards, the templates, and the "Go/No-Go" strategy.
- Lead a Specialized Force – Manage and mentor a high-performing Estimating Department, setting the bar for excellence across Hard Bid, CMAR, and Design-Build pursuits.
- High-Stakes Influence – Present your vision directly to the President and Ownership. Your risk assessments and contingency logic will be the foundation of our client's future growth.
- Deep Market Roots – Leverage a legacy of over 30 years and 1,000+ completed projects in South Florida. This isn't just a job; it’s an opportunity to build upon a massive local legacy.
What You'll Do
- Own the Bid Strategy – Define fee structures, contingencies, and escalation plans. You aren't just filling out forms; you're engineering a path to victory.
- Master Complex Execution – Lead progressive and conceptual estimating for massive projects, ensuring cost-to-budget tracking and aggressive Value Engineering.
- Direct Subcontractor Outreach – Utilize your South Florida network to drive market intelligence, ensuring 100% competitive coverage and elite-level bid leveling.
- Mitigate Risk with Precision – Maintain the risk register. Identify the scope gaps and "hidden" costs that others miss, ensuring every GMP is bulletproof.
- Foster Collaborative Design – Partner with design teams for Target Value Design and logistics planning, bridging the gap between a blueprint and a profitable reality.
What You Bring
- Industry Tenure – 10+ years of progressive estimating experience, with at least 3–5 years in a leadership/management seat.
- Regional Expertise – A robust South Florida subcontractor network and an intimate understanding of municipal bid requirements (bonds, forms, and addenda control).
- Technical Prowess – High-level proficiency in ProEst, BuildingConnected, and P6/MS Project. You should be a master of OST/Bluebeam and advanced Excel cost modeling.
- Strategic Acumen – Proven success in Hard Bid and GMP settings, with the ability to integrate logistics, phasing, and long-lead items into a master schedule.
What You'll Get
- Elite Compensation – Top-tier base salary plus bonuses tied to the success of your department and projects.
- Stability & Legacy – Join a family-owned organization with over 30 years of stability and a dedicated workforce of 200+ professionals.
- Executive Access – A seat at the table with the President and Ownership, influencing the company’s direction.
- The South Florida Lifestyle – Work for a specialized leader in one of the world's most dynamic construction markets.
- Comprehensive Benefits – Full coverage for you and your family, reflecting our client's commitment to their "qualified personnel" who make their success possible.
Ready to Command the Strategy Behind the Build? If you are a lead estimator ready to step into a Chief role with authority, distinction, and a clear path to executive influence, we want to talk.
Apply today to start the conversation.