Engineering Structures Elsevier Impact Factor Jobs in Tyler Texas Flexible
734 positions found — Page 6
Border Patrol Agent (BPA) Entry Level
NEW RECRUITMENT AND RETENTION INCENTIVES!
IMPORTANT NOTICE: Duty assignments available at the time of offer may include the Southwest Border, including prioritized locations.
U.S. Border Patrol determines duty assignments at the time of offer based on operational needs, which may or may not align with candidates' first-choice preferences. Relocation may be required.
DON'T FORGET TO CHECK OUT THE INCENTIVES – SEE SALARY SECTION BELOW
The U.S. Border Patrol (USBP) offers those interested in a career in law enforcement an opportunity to work with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission of protecting America.
If you seek an exciting and rewarding job that provides excellent pay, exceptional federal benefits, and job stability, now is the time to make your move. U.S. Border Patrol (USBP), within the U.S. Customs and Border Protection (CBP), is hiring immediately for these full-time, entry-level, career Law Enforcement Officer (LEO) opportunities.
Salary and Benefits
Annual Base Salary for newly appointed BPAs varies per grade, as follows:
GL-5/GL-7 $49,739 - $89,518 per year
Duty location impacts pay rates; locality pay for federal law enforcement is higher in some locations than others. A fully trained BPA may be eligible for up to an additional 25% of base pay per the BPA Pay Reform Act of 2014. This is a career ladder position with a grade level progression of GL-5, GL-7, GL-9, GS-11, and GS-12. You will be eligible for a promotion to the next higher grade level (without reapplying) once you successfully complete 52 weeks in each grade level.
Border Patrol Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional ROTH 401(k) offering.
*Recruitment Incentive* Newly appointed Border Patrol Agents (as defined in 5 CFR 575.102 ) will be offered up to a $20,000 incentive. The first $10,000 will be paid upon successful completion of the Border Patrol Academy, with the remaining $10,000 awarded for accepting a prioritized location. Prioritized locations include Sierra Blanca, TX; Presidio, TX; Sanderson, TX; Comstock, TX; Lordsburg, NM; Freer, TX; Hebbronville, TX; Ajo, AZ.
*Retention Incentive* Newly appointed Border Patrol Agents may also qualify for up to $40,000 in additional incentives distributed over their first four years.
Duties and Responsibilities
As a BPA, you will be part of our 60,000+ workforce that strives to protect the American people by safeguarding our borders, deterring illicit activity, and enhancing the nation's economic prosperity. Being a BPA makes you a valuable member of the Federal Law Enforcement Officer (LEO) profession.
Typical assignments include:
- Detecting and questioning people suspected of violating immigration and custom laws and inspecting documents and possessions to determine citizenship or violations
- Preventing and apprehending undocumented noncitizens and smugglers of noncitizens at or near the borders by maintaining surveillance from covert positions to include using infrared scopes during night operations
- Interpreting and following tracks, marks, and other physical evidence of illegal entry of persons or contraband
- Performing farm checks, building checks, traffic checks, city patrols, and transportation checks
- Patrolling the international boundary and coastal waterways using a variety of government assets such as vehicles, horses, vessels, watercraft, off-road vehicles, ATVs, snowmobiles, and motorcycles for the accomplishment of the USBP Mission.
Qualifications
You qualify for the GL-5 grade level if you possess one of the following:
Experience: One (1) year of general work experience that demonstrates the ability to take charge, make sound decisions, and maintain composure in stressful situations; to learn regulations, methods, and techniques through classroom training and/or on-the-job instruction; and the ability to gather concise information through questioning, observation, and examination of documents and records; OR
Education Substitution: A bachelor's degree or successful completion of a full four-year course of study in any field leading to a bachelor's degree from an accredited college or university; OR
Combination of Experience and Education: A combination of general work experience AND successfully completed college education. This will be calculated using your resume and official or unofficial transcripts submitted with your application.
You qualify for the GL-7 grade level if you possess one of the following:
Experience: One year of specialized work experience that shows you have the skills necessary to:
- Make sound judgments and decisions in the use of firearms.
- Deal effectively with people in a courteous and tactful manner in connection with law enforcement matters.
- Analyze information rapidly and make prompt decisions where you will be expected to make arrests after the completion of required training and apply these skills in a law enforcement capacity such as criminal code enforcement, determining violations of laws, correctional or rehabilitation work involving criminal offenders, security, military, etc.
The above experience will be applied in connection with the following: Make arrests and exercise sound judgment in the use of firearms; deal effectively with people in a courteous manner in connection with law enforcement matters; analyze information rapidly and make prompt decisions; or develop and maintain contact with a network of informants.
Education Substitution for the GL-7 grade level: A bachelor's degree with superior academic achievement, which is based on (1) class standing, (2) grade-point average (i.e., GPA of 3.0 or higher out of a possible 4.0), or (3) honor society membership. Or will receive a bachelor's degree with Superior Academic Achievement. Or one full year of graduate-level education in a field of study related to law enforcement (e.g., criminal justice, homeland security, justice studies, law enforcement, courts and judicial systems, forensic technology, forensic psychology, or corrections and rehabilitation) from an accredited college or university; OR
A Combination of Experience and Education: This will be calculated using your resume and official or unofficial transcripts submitted with your application.
Note: If you have previous or current law enforcement or military law enforcement experience, you may qualify at the GL-9 and or GS-11 grade level. Please refer to the BPA GL-9 - 11 announcement.
Other Requirements
Citizenship: You must be a U.S. Citizen to apply for this position.
Residency: You must have had primary U.S. residency (includes protectorates as declared under international law) for at least three of the last five years.
Age Restriction: In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions. Candidates must be referred for selection to the Border Patrol Agent position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03. The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d).
Veterans' Preference: You may also be eligible for an excepted service Veterans Recruitment Appointment (VRA). The age restriction does not apply if you are Veterans' Preference eligible.
Formal Training: After you are hired, you will be detailed to the U.S. Border Patrol Academy in Artesia, New Mexico, for approximately six (6) months of intensive instruction in immigration and nationality laws, law enforcement and USBP-specific operations, driver training, physical techniques, firearms, and other courses. Border Patrol work requires the ability to speak and read Spanish, as well as English. Border Patrol Agents will be provided training to become proficient with the Spanish language at the Academy.
How to Apply:
Click the Apply button on this site. You will be linked to the CBP Talent Network registration page. For Position of Interest, select Border Patrol Agent, then complete the pre-screening questions.
You'll then receive a link(s) to the BPA Job Opening Announcements (JOAs) on USAJOBS, the federal government's official employment site, to complete your application. Be certain to review ALL details of the job opportunity announcement and follow all instructions in the application process, including items (resume, transcripts, etc.) to submit. You will be evaluated based on your resume, supporting documents, and the BPA Entrance Exam.
If you have questions about the application process, contact a recruiter through the U.S. Border Patrol page: /s/usbp.
As a subscriber to the CBP Talent Network, you'll receive monthly emails with information about webinars, career expos, and future opportunities with CBP.
Border Patrol Agent (BPA) Entry Level
NEW RECRUITMENT AND RETENTION INCENTIVES!
IMPORTANT NOTICE: Duty assignments available at the time of offer may include the Southwest Border, including prioritized locations.
U.S. Border Patrol determines duty assignments at the time of offer based on operational needs, which may or may not align with candidates' first-choice preferences. Relocation may be required.
DON'T FORGET TO CHECK OUT THE INCENTIVES – SEE SALARY SECTION BELOW
The U.S. Border Patrol (USBP) offers those interested in a career in law enforcement an opportunity to work with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission of protecting America.
If you seek an exciting and rewarding job that provides excellent pay, exceptional federal benefits, and job stability, now is the time to make your move. U.S. Border Patrol (USBP), within the U.S. Customs and Border Protection (CBP), is hiring immediately for these full-time, entry-level, career Law Enforcement Officer (LEO) opportunities.
Salary and Benefits
Annual Base Salary for newly appointed BPAs varies per grade, as follows:
GL-5/GL-7 $49,739 - $89,518 per year
Duty location impacts pay rates; locality pay for federal law enforcement is higher in some locations than others. A fully trained BPA may be eligible for up to an additional 25% of base pay per the BPA Pay Reform Act of 2014. This is a career ladder position with a grade level progression of GL-5, GL-7, GL-9, GS-11, and GS-12. You will be eligible for a promotion to the next higher grade level (without reapplying) once you successfully complete 52 weeks in each grade level.
Border Patrol Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional ROTH 401(k) offering.
*Recruitment Incentive* Newly appointed Border Patrol Agents (as defined in 5 CFR 575.102 ) will be offered up to a $20,000 incentive. The first $10,000 will be paid upon successful completion of the Border Patrol Academy, with the remaining $10,000 awarded for accepting a prioritized location. Prioritized locations include Sierra Blanca, TX; Presidio, TX; Sanderson, TX; Comstock, TX; Lordsburg, NM; Freer, TX; Hebbronville, TX; Ajo, AZ.
*Retention Incentive* Newly appointed Border Patrol Agents may also qualify for up to $40,000 in additional incentives distributed over their first four years.
Duties and Responsibilities
As a BPA, you will be part of our 60,000+ workforce that strives to protect the American people by safeguarding our borders, deterring illicit activity, and enhancing the nation's economic prosperity. Being a BPA makes you a valuable member of the Federal Law Enforcement Officer (LEO) profession.
Typical assignments include:
- Detecting and questioning people suspected of violating immigration and custom laws and inspecting documents and possessions to determine citizenship or violations
- Preventing and apprehending undocumented noncitizens and smugglers of noncitizens at or near the borders by maintaining surveillance from covert positions to include using infrared scopes during night operations
- Interpreting and following tracks, marks, and other physical evidence of illegal entry of persons or contraband
- Performing farm checks, building checks, traffic checks, city patrols, and transportation checks
- Patrolling the international boundary and coastal waterways using a variety of government assets such as vehicles, horses, vessels, watercraft, off-road vehicles, ATVs, snowmobiles, and motorcycles for the accomplishment of the USBP Mission.
Qualifications
You qualify for the GL-5 grade level if you possess one of the following:
Experience: One (1) year of general work experience that demonstrates the ability to take charge, make sound decisions, and maintain composure in stressful situations; to learn regulations, methods, and techniques through classroom training and/or on-the-job instruction; and the ability to gather concise information through questioning, observation, and examination of documents and records; OR
Education Substitution: A bachelor's degree or successful completion of a full four-year course of study in any field leading to a bachelor's degree from an accredited college or university; OR
Combination of Experience and Education: A combination of general work experience AND successfully completed college education. This will be calculated using your resume and official or unofficial transcripts submitted with your application.
You qualify for the GL-7 grade level if you possess one of the following:
Experience: One year of specialized work experience that shows you have the skills necessary to:
- Make sound judgments and decisions in the use of firearms.
- Deal effectively with people in a courteous and tactful manner in connection with law enforcement matters.
- Analyze information rapidly and make prompt decisions where you will be expected to make arrests after the completion of required training and apply these skills in a law enforcement capacity such as criminal code enforcement, determining violations of laws, correctional or rehabilitation work involving criminal offenders, security, military, etc.
The above experience will be applied in connection with the following: Make arrests and exercise sound judgment in the use of firearms; deal effectively with people in a courteous manner in connection with law enforcement matters; analyze information rapidly and make prompt decisions; or develop and maintain contact with a network of informants.
Education Substitution for the GL-7 grade level: A bachelor's degree with superior academic achievement, which is based on (1) class standing, (2) grade-point average (i.e., GPA of 3.0 or higher out of a possible 4.0), or (3) honor society membership. Or will receive a bachelor's degree with Superior Academic Achievement. Or one full year of graduate-level education in a field of study related to law enforcement (e.g., criminal justice, homeland security, justice studies, law enforcement, courts and judicial systems, forensic technology, forensic psychology, or corrections and rehabilitation) from an accredited college or university; OR
A Combination of Experience and Education: This will be calculated using your resume and official or unofficial transcripts submitted with your application.
Note: If you have previous or current law enforcement or military law enforcement experience, you may qualify at the GL-9 and or GS-11 grade level. Please refer to the BPA GL-9 - 11 announcement.
Other Requirements
Citizenship: You must be a U.S. Citizen to apply for this position.
Residency: You must have had primary U.S. residency (includes protectorates as declared under international law) for at least three of the last five years.
Age Restriction: In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions. Candidates must be referred for selection to the Border Patrol Agent position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03. The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d).
Veterans' Preference: You may also be eligible for an excepted service Veterans Recruitment Appointment (VRA). The age restriction does not apply if you are Veterans' Preference eligible.
Formal Training: After you are hired, you will be detailed to the U.S. Border Patrol Academy in Artesia, New Mexico, for approximately six (6) months of intensive instruction in immigration and nationality laws, law enforcement and USBP-specific operations, driver training, physical techniques, firearms, and other courses. Border Patrol work requires the ability to speak and read Spanish, as well as English. Border Patrol Agents will be provided training to become proficient with the Spanish language at the Academy.
How to Apply:
Click the Apply button on this site. You will be linked to the CBP Talent Network registration page. For Position of Interest, select Border Patrol Agent, then complete the pre-screening questions.
You'll then receive a link(s) to the BPA Job Opening Announcements (JOAs) on USAJOBS, the federal government's official employment site, to complete your application. Be certain to review ALL details of the job opportunity announcement and follow all instructions in the application process, including items (resume, transcripts, etc.) to submit. You will be evaluated based on your resume, supporting documents, and the BPA Entrance Exam.
If you have questions about the application process, contact a recruiter through the U.S. Border Patrol page: /s/usbp.
As a subscriber to the CBP Talent Network, you'll receive monthly emails with information about webinars, career expos, and future opportunities with CBP.
Work for a company that is truly making the world a happier place, one smile at a time! At Benevis, we create over a million smiles a year in the communities we serve and believe that every person deserves access to quality, affordable dental care. This mission drives everything we do! With over 3000 employees in offices across the country from clinical to support staff - we are united in our mission to create happy, healthy smiles through providing high quality dental care to underserved families in a fun, compassionate environment. Are you ready to join us in creating our next million smiles? We have JUST the opportunity for you.
We are actively seeking an Associate Dentist to join our growing team. Support our mission to provide excellent dental care in the community and help us create more smiles and memorable experiences for children and adults. Join a team that believes in teamwork and truly cares about their patients. Find your opportunity to make an impact:
- Take care of your community while participating in activities to promote a positive image of the company!
- Join in morning huddles (hey, you can even run one!), plan your day and let your team know how much you appreciate them, highlight great examples of customer focus, collaboration, meeting goals, etc.
- Love working with kids (they make up 70% or more of our patient base)
Associate Dentists are responsible for providing dental services to patients with the support of their team. Our practice has:
- DentaPro software
- Digital x-ray and Panorex units
- Fiber-optic handpieces
- Yearly OSHA and HIPPA and Emergency Management training
- Ratio of 1 hygienist, 1 hygiene assistant, 2 dental assistants per provider
- Patient Base: primarily ages 3-21 and up to 30% adult population (depending upon location)
- Office flow: average 10-12 operative patients and 20-25 hygiene patients
- State insurance plans, PPO and out-of-network payor mix
***This opportunity provides growth and development through mentoring and collaboration***
What we offer:
- Guaranteed base pay in excess of 200k with uncapped earning potential
- Student loan repayment program
- Sign on bonus
- No lab fees
- FT providers are eligible to participate in Medical/Dental/Vision insurance plans, HSA/FSA
- Short Term Disability/Long Term Disability and Basic Life Insurance plans are paid for by company
- 401(k) Retirement Plan
- Company paid malpractice insurance coverage
- Paid holidays and time off
- Continuing Education reimbursements
- CE offered through ADA Accredited Continued Education Recognition Program (C.E.R.P)
We expect you to have:
- DDS/DMD from a dental education program accredited by the Commission on Dental Accreditation
- Current, valid license to practice dentistry in states where providing care or eligible for licensure
- Other certifications as required - CPR, DEA, etc.
- Nitrous Oxide certification (only LA, MS, DC, TX, MA)
- Compassion and a strong desire to provide dental care to both children and adults
- Reimbursements for associated licenses, certifications, and professional dues such as ADA and/or AAPD memberships
- Multiple schedule options to help maintain a healthy work/life balance
- VISA and Green Card sponsorship available
We value teamwork, mutual respect, and cooperation. We do not practice unlawful discrimination, including harassment or tolerate it in our workplace. What do we mean by discrimination? We mean that we do not discriminate on the basis of race, color, creed, religion, sex, national origin, age, citizenship, disability, sexual orientation or any other characteristic protected by federal, state, or local law.
Border Patrol Agent (BPA) Entry Level
NEW RECRUITMENT AND RETENTION INCENTIVES!
IMPORTANT NOTICE: Duty assignments available at the time of offer may include the Southwest Border, including prioritized locations.
U.S. Border Patrol determines duty assignments at the time of offer based on operational needs, which may or may not align with candidates' first-choice preferences. Relocation may be required.
DON'T FORGET TO CHECK OUT THE INCENTIVES – SEE SALARY SECTION BELOW
The U.S. Border Patrol (USBP) offers those interested in a career in law enforcement an opportunity to work with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission of protecting America.
If you seek an exciting and rewarding job that provides excellent pay, exceptional federal benefits, and job stability, now is the time to make your move. U.S. Border Patrol (USBP), within the U.S. Customs and Border Protection (CBP), is hiring immediately for these full-time, entry-level, career Law Enforcement Officer (LEO) opportunities.
Salary and Benefits
Annual Base Salary for newly appointed BPAs varies per grade, as follows:
GL-5/GL-7 $49,739 - $89,518 per year
Duty location impacts pay rates; locality pay for federal law enforcement is higher in some locations than others. A fully trained BPA may be eligible for up to an additional 25% of base pay per the BPA Pay Reform Act of 2014. This is a career ladder position with a grade level progression of GL-5, GL-7, GL-9, GS-11, and GS-12. You will be eligible for a promotion to the next higher grade level (without reapplying) once you successfully complete 52 weeks in each grade level.
Border Patrol Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional ROTH 401(k) offering.
*Recruitment Incentive* Newly appointed Border Patrol Agents (as defined in 5 CFR 575.102 ) will be offered up to a $20,000 incentive. The first $10,000 will be paid upon successful completion of the Border Patrol Academy, with the remaining $10,000 awarded for accepting a prioritized location. Prioritized locations include Sierra Blanca, TX; Presidio, TX; Sanderson, TX; Comstock, TX; Lordsburg, NM; Freer, TX; Hebbronville, TX; Ajo, AZ.
*Retention Incentive* Newly appointed Border Patrol Agents may also qualify for up to $40,000 in additional incentives distributed over their first four years.
Duties and Responsibilities
As a BPA, you will be part of our 60,000+ workforce that strives to protect the American people by safeguarding our borders, deterring illicit activity, and enhancing the nation's economic prosperity. Being a BPA makes you a valuable member of the Federal Law Enforcement Officer (LEO) profession.
Typical assignments include:
- Detecting and questioning people suspected of violating immigration and custom laws and inspecting documents and possessions to determine citizenship or violations
- Preventing and apprehending undocumented noncitizens and smugglers of noncitizens at or near the borders by maintaining surveillance from covert positions to include using infrared scopes during night operations
- Interpreting and following tracks, marks, and other physical evidence of illegal entry of persons or contraband
- Performing farm checks, building checks, traffic checks, city patrols, and transportation checks
- Patrolling the international boundary and coastal waterways using a variety of government assets such as vehicles, horses, vessels, watercraft, off-road vehicles, ATVs, snowmobiles, and motorcycles for the accomplishment of the USBP Mission.
Qualifications
You qualify for the GL-5 grade level if you possess one of the following:
Experience: One (1) year of general work experience that demonstrates the ability to take charge, make sound decisions, and maintain composure in stressful situations; to learn regulations, methods, and techniques through classroom training and/or on-the-job instruction; and the ability to gather concise information through questioning, observation, and examination of documents and records; OR
Education Substitution: A bachelor's degree or successful completion of a full four-year course of study in any field leading to a bachelor's degree from an accredited college or university; OR
Combination of Experience and Education: A combination of general work experience AND successfully completed college education. This will be calculated using your resume and official or unofficial transcripts submitted with your application.
You qualify for the GL-7 grade level if you possess one of the following:
Experience: One year of specialized work experience that shows you have the skills necessary to:
- Make sound judgments and decisions in the use of firearms.
- Deal effectively with people in a courteous and tactful manner in connection with law enforcement matters.
- Analyze information rapidly and make prompt decisions where you will be expected to make arrests after the completion of required training and apply these skills in a law enforcement capacity such as criminal code enforcement, determining violations of laws, correctional or rehabilitation work involving criminal offenders, security, military, etc.
The above experience will be applied in connection with the following: Make arrests and exercise sound judgment in the use of firearms; deal effectively with people in a courteous manner in connection with law enforcement matters; analyze information rapidly and make prompt decisions; or develop and maintain contact with a network of informants.
Education Substitution for the GL-7 grade level: A bachelor's degree with superior academic achievement, which is based on (1) class standing, (2) grade-point average (i.e., GPA of 3.0 or higher out of a possible 4.0), or (3) honor society membership. Or will receive a bachelor's degree with Superior Academic Achievement. Or one full year of graduate-level education in a field of study related to law enforcement (e.g., criminal justice, homeland security, justice studies, law enforcement, courts and judicial systems, forensic technology, forensic psychology, or corrections and rehabilitation) from an accredited college or university; OR
A Combination of Experience and Education: This will be calculated using your resume and official or unofficial transcripts submitted with your application.
Note: If you have previous or current law enforcement or military law enforcement experience, you may qualify at the GL-9 and or GS-11 grade level. Please refer to the BPA GL-9 - 11 announcement.
Other Requirements
Citizenship: You must be a U.S. Citizen to apply for this position.
Residency: You must have had primary U.S. residency (includes protectorates as declared under international law) for at least three of the last five years.
Age Restriction: In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions. Candidates must be referred for selection to the Border Patrol Agent position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03. The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d).
Veterans' Preference: You may also be eligible for an excepted service Veterans Recruitment Appointment (VRA). The age restriction does not apply if you are Veterans' Preference eligible.
Formal Training: After you are hired, you will be detailed to the U.S. Border Patrol Academy in Artesia, New Mexico, for approximately six (6) months of intensive instruction in immigration and nationality laws, law enforcement and USBP-specific operations, driver training, physical techniques, firearms, and other courses. Border Patrol work requires the ability to speak and read Spanish, as well as English. Border Patrol Agents will be provided training to become proficient with the Spanish language at the Academy.
How to Apply:
Click the Apply button on this site. You will be linked to the CBP Talent Network registration page. For Position of Interest, select Border Patrol Agent, then complete the pre-screening questions.
You'll then receive a link(s) to the BPA Job Opening Announcements (JOAs) on USAJOBS, the federal government's official employment site, to complete your application. Be certain to review ALL details of the job opportunity announcement and follow all instructions in the application process, including items (resume, transcripts, etc.) to submit. You will be evaluated based on your resume, supporting documents, and the BPA Entrance Exam.
If you have questions about the application process, contact a recruiter through the U.S. Border Patrol page: /s/usbp.
As a subscriber to the CBP Talent Network, you'll receive monthly emails with information about webinars, career expos, and future opportunities with CBP.
Head Cashiers are to greet and thank every customer who enters and leaves the store. Head Cashiers must be proficient in all aspects of the Cavender's Boot City cashiering system and knowledgeable of all paperwork associated with each cashiering entry. Head Cashiers are also responsible for keeping the store neat and clean and must always answer the phone with an enthusiastic response and professional manner. Head Cashiers will support our management staff with miscellaneous tasks like stocking, visual displays, special orders, and all basic house-keeping needs.
Duties and Responsibilities
- Support the \"Cavender's Culture\" and drive our Mission, Vision, and Values
- Perform cashiering tasks accurately and efficiently
- Keep work area neat, clean, and organized
- Be knowledgeable about CBC policies and procedures
- Be knowledgeable of all CBC cashiering transactions:
- Cash Sales
- Check Sales
- Non-taxable sales
- Credit Cards
- Voids
- Exchanges
- Enter all sales and monies in register at time of sale
- Help stock merchandise and straighten store as needed
- Suggest possible add-on purchases to the customer and promote store specials
- Report to work promptly, neatly groomed, and appropriately attired
- Be security conscious at all times
- Provide knowledgeable responses to phone inquiries (e.g. sales, promotions, store location, price, and inventory)
- Keep updated on sale promotions (items/prices/etc.)
- Practice inventory control on boots
- Check for boot mis-mates
- Follow the company policy on all commission sales; validate all sales tickets
- Perform all other miscellaneous duties as assigned
- Work with supervisors to understand all actions needed to impact the desired goals set by the company (i.e. ADS / UPT's / Company or Vendor PM's)
Qualifications and Requirements
- Job requires associate to raise or lower objects from one level to another regularly during shift
- Ability to comprehend basic instructions
- Ability to interpret documents
- Ability to apply abstract principles to a wide range of complex tasks
- Ability to understand the meanings of words and effectively respond
- Ability to analyze information and write reports
- Associate must be able to read English.
- Associate must be able to understand English
- Associate must be able to stay alert during work hours assigned
Cavender's is an Equal Opportunity Employer. We do not discriminate based on race, religion, color, military status, national origin, sex, ancestry, age, sexual orientation, pregnancy, disability, genetic information, or any other personal characteristic protected under federal, state, or local law. Cavender's will provide reasonable accommodations for persons with a disability upon request. If you have a disability and need assistance completing the application, please call Customer Service at (888) 361 2555 or visit your nearest Cavender's store.
Power Distribution and Make Ready Designer
Overhead Utility Pole Design • Joint-Use Engineering • NESC-Compliant Make-Ready Work
Location: Kalamazoo, MI / Remote (U.S.)
Are you an experienced Power Distribution Designer or Make-Ready Designer looking to support meaningful utility engineering projects? Join a team that values accuracy, collaboration, and long-term professional growth.
ABOUT THIS OPPORTUNITY
We are seeking skilled Make-Ready Designers (primary focus) and Power Distribution Designers to support engineering programs for major electric and telecom utilities. Ideal candidates bring demonstrated experience in overhead utility pole design, NESC application, clearance assessment, pole loading analysis, and construction package development. Useful design platforms include DDS, Katapult, O-Calc, GIS, MicroStation, AutoCAD, or client-specific drafting systems.
In this role, you will review field/walkout data, evaluate existing attachment conditions, model pole loading, determine make-ready requirements, and prepare accurate construction-ready deliverables. Applicants without utility pole design or distribution engineering experience will not be considered.
Note: This position is remote, but new hires must attend a 2-week paid, in-person orientation at our Perrysburg, OH headquarters.
WHAT YOU WILL DO
• Execute overhead distribution and make-ready design work orders while meeting quality, time, and budget expectations
• Apply established engineering design standards, NESC requirements, and internal processes
• Perform end-to-end make-ready, joint-use, and/or general distribution design
• Conduct permitting and easement research (pole ownership, ROW, property rights, approvals)
• Collaborate with team members to resolve design challenges and ensure accurate deliverables
• Use design software such as AutoCAD, MicroStation, DDS, PoleForeman, O-Calc, Katapult, or client systems
• Perform quality control reviews when required
• Support additional duties as assigned
TOP COMPETENCIES & SKILLS
Make-Ready Engineering, Joint-Use Design, Pole Loading Analysis, Utility Pole Design, Overhead Distribution Design, NESC Compliance, Utility Engineering, Pole Attachments, Make-Ready Construction, Aerial Design, Utility Coordination, Right-of-Way Permitting, Pole Replacement Design, Make-Ready Estimates, Field Survey Interpretation, CAD for Utility Design, GIS for Utility Design, Electrical Distribution Design, Utility Construction Standards, Telecommunications Make-Ready
Requirements:
WHAT WE’RE LOOKING FOR
• High school diploma or equivalent required; an associate degree or higher in engineering, drafting, or a related field is preferred
• Minimum 2 years of experience in make-ready engineering, joint-use design, or electric power distribution design (3+ years strongly preferred)
• Proven experience in utility pole design, including NESC application, clearance analysis, pole loading concepts, and preparation of construction-ready design packages
• Proficiency with CAD or MicroStation; experience with DDS, Katapult, O-Calc, or similar utility design platforms is strongly preferred
• Solid understanding of power distribution construction practices, with the ability to learn utility-specific proprietary systems efficiently
• Must hold a valid driver’s license, maintain active auto insurance, and pass all required background, drug, and MVR screenings
• Authorization to work in the United States is required
• Willingness to travel occasionally, including minimal overnight travel when project needs require
• Ability to work a standard Monday–Friday schedule aligned to Eastern Time, with Central/Mountain/Pacific adjustments as appropriate
PHYSICAL REQUIREMENTS
• Ability to work for extended periods using a computer keyboard, monitor, and telephone
• Ability to prepare and analyze data, review detailed information, and work with design tools requiring close vision, distance vision, color vision, peripheral vision, depth perception, and focus adjustment
• Ability to communicate effectively through oral and written channels
ABOUT SIGMA TECHNOLOGIES
Sigma Technologies is a growing engineering and design firm with 500+ team members across 30+ states. For over 25 years, we’ve supported major power and telecommunications utilities with work that directly impacts communities nationwide. Our core values — Safety, Honesty, Truth, and Decency — shape how we work and who we hire. We are TeamSigma™.
*To learn more about working at Sigma, view our video and career page.
* If you do not have Power Design experience, please refer to our other open positions: *While Designer openings are listed in multiple locations, you only need to apply to one, as they are remote roles.
WHAT WE OFFER
We want our Associates to stay healthy, happy, and secure. We offer a positive work environment with supportive coworkers, managers, and leaders, plus:
• No-cost monthly healthcare plan option for employees
• Competitive pay
• Medical, dental, and vision plans with up to 80% of the premium sponsored by Sigma
• 401(k) plan with matching contributions up to 5% of salary
• Paid holidays, vacation, and sick time
• Education and professional licensing assistance programs
This job advertisement is intended to outline the primary responsibilities and requirements of the role. It is not all-inclusive. Additional duties may be assigned as needed. This ad does not constitute an employment agreement, and job requirements may change based on organizational needs.
Pay is commensurate with experience and education. Sigma is an equal opportunity employer and does not discriminate based on race, color, gender, sexual preference, gender identity, age, religion, national origin, disability, genetic information, veteran/military status, or any classification protected by law.
PM22
#Remote
PI7087748e2d7e-3631
Remote working/work at home options are available for this role.
Power Distribution and Make Ready Designer
Overhead Utility Pole Design • Joint-Use Engineering • NESC-Compliant Make-Ready Work
Location: Akron, OH / Remote (U.S.)
Are you an experienced Power Distribution Designer or Make-Ready Designer looking to support meaningful utility engineering projects? Join a team that values accuracy, collaboration, and long-term professional growth.
ABOUT THIS OPPORTUNITY
We are seeking skilled Make-Ready Designers (primary focus) and Power Distribution Designers to support engineering programs for major electric and telecom utilities. Ideal candidates bring demonstrated experience in overhead utility pole design, NESC application, clearance assessment, pole loading analysis, and construction package development. Useful design platforms include DDS, Katapult, O-Calc, GIS, MicroStation, AutoCAD, or client-specific drafting systems.
In this role, you will review field/walkout data, evaluate existing attachment conditions, model pole loading, determine make-ready requirements, and prepare accurate construction-ready deliverables. Applicants without utility pole design or distribution engineering experience will not be considered.
Note: This position is remote, but new hires must attend a 2-week paid, in-person orientation at our Perrysburg, OH headquarters.
WHAT YOU WILL DO
• Execute overhead distribution and make-ready design work orders while meeting quality, time, and budget expectations
• Apply established engineering design standards, NESC requirements, and internal processes
• Perform end-to-end make-ready, joint-use, and/or general distribution design
• Conduct permitting and easement research (pole ownership, ROW, property rights, approvals)
• Collaborate with team members to resolve design challenges and ensure accurate deliverables
• Use design software such as AutoCAD, MicroStation, DDS, PoleForeman, O-Calc, Katapult, or client systems
• Perform quality control reviews when required
• Support additional duties as assigned
TOP COMPETENCIES & SKILLS
Make-Ready Engineering, Joint-Use Design, Pole Loading Analysis, Utility Pole Design, Overhead Distribution Design, NESC Compliance, Utility Engineering, Pole Attachments, Make-Ready Construction, Aerial Design, Utility Coordination, Right-of-Way Permitting, Pole Replacement Design, Make-Ready Estimates, Field Survey Interpretation, CAD for Utility Design, GIS for Utility Design, Electrical Distribution Design, Utility Construction Standards, Telecommunications Make-Ready
Requirements:
WHAT WE’RE LOOKING FOR
• High school diploma or equivalent required; an associate degree or higher in engineering, drafting, or a related field is preferred
• Minimum 2 years of experience in make-ready engineering, joint-use design, or electric power distribution design (3+ years strongly preferred)
• Proven experience in utility pole design, including NESC application, clearance analysis, pole loading concepts, and preparation of construction-ready design packages
• Proficiency with CAD or MicroStation; experience with DDS, Katapult, O-Calc, or similar utility design platforms is strongly preferred
• Solid understanding of power distribution construction practices, with the ability to learn utility-specific proprietary systems efficiently
• Must hold a valid driver’s license, maintain active auto insurance, and pass all required background, drug, and MVR screenings
• Authorization to work in the United States is required
• Willingness to travel occasionally, including minimal overnight travel when project needs require
• Ability to work a standard Monday–Friday schedule aligned to Eastern Time, with Central/Mountain/Pacific adjustments as appropriate
PHYSICAL REQUIREMENTS
• Ability to work for extended periods using a computer keyboard, monitor, and telephone
• Ability to prepare and analyze data, review detailed information, and work with design tools requiring close vision, distance vision, color vision, peripheral vision, depth perception, and focus adjustment
• Ability to communicate effectively through oral and written channels
ABOUT SIGMA TECHNOLOGIES
Sigma Technologies is a growing engineering and design firm with 500+ team members across 30+ states. For over 25 years, we’ve supported major power and telecommunications utilities with work that directly impacts communities nationwide. Our core values — Safety, Honesty, Truth, and Decency — shape how we work and who we hire. We are TeamSigma™.
*To learn more about working at Sigma, view our video and career page.
* If you do not have Power Design experience, please refer to our other open positions: *While Designer openings are listed in multiple locations, you only need to apply to one, as they are remote roles.
WHAT WE OFFER
We want our Associates to stay healthy, happy, and secure. We offer a positive work environment with supportive coworkers, managers, and leaders, plus:
• No-cost monthly healthcare plan option for employees
• Competitive pay
• Medical, dental, and vision plans with up to 80% of the premium sponsored by Sigma
• 401(k) plan with matching contributions up to 5% of salary
• Paid holidays, vacation, and sick time
• Education and professional licensing assistance programs
This job advertisement is intended to outline the primary responsibilities and requirements of the role. It is not all-inclusive. Additional duties may be assigned as needed. This ad does not constitute an employment agreement, and job requirements may change based on organizational needs.
Pay is commensurate with experience and education. Sigma is an equal opportunity employer and does not discriminate based on race, color, gender, sexual preference, gender identity, age, religion, national origin, disability, genetic information, veteran/military status, or any classification protected by law.
PM22
#Remote
PI103b1a8bddaa-38
Remote working/work at home options are available for this role.
Power Distribution and Make Ready Designer
Overhead Utility Pole Design • Joint-Use Engineering • NESC-Compliant Make-Ready Work
Location: Roanoke, VA (Remote)
Are you an experienced Power Distribution Designer or Make-Ready Designer looking to support meaningful utility engineering projects? Join a team that values accuracy, collaboration, and long-term professional growth.
ABOUT THIS OPPORTUNITY
We are seeking skilled Make-Ready Designers (primary focus) and Power Distribution Designers to support engineering programs for major electric and telecom utilities. Ideal candidates bring demonstrated experience in overhead utility pole design, NESC application, clearance assessment, pole loading analysis, and construction package development. Useful design platforms include DDS, Katapult, O-Calc, GIS, MicroStation, AutoCAD, or client-specific drafting systems.
In this role, you will review field/walkout data, evaluate existing attachment conditions, model pole loading, determine make-ready requirements, and prepare accurate construction-ready deliverables. Applicants without utility pole design or distribution engineering experience will not be considered.
Note: This position is remote, but new hires must attend a 2-week paid, in-person orientation at our Perrysburg, OH headquarters.
WHAT YOU WILL DO
• Execute overhead distribution and make-ready design work orders while meeting quality, time, and budget expectations
• Apply established engineering design standards, NESC requirements, and internal processes
• Perform end-to-end make-ready, joint-use, and/or general distribution design
• Conduct permitting and easement research (pole ownership, ROW, property rights, approvals)
• Collaborate with team members to resolve design challenges and ensure accurate deliverables
• Use design software such as AutoCAD, MicroStation, DDS, PoleForeman, O-Calc, Katapult, or client systems
• Perform quality control reviews when required
• Support additional duties as assigned
TOP COMPETENCIES & SKILLS
Make-Ready Engineering, Joint-Use Design, Pole Loading Analysis, Utility Pole Design, Overhead Distribution Design, NESC Compliance, Utility Engineering, Pole Attachments, Make-Ready Construction, Aerial Design, Utility Coordination, Right-of-Way Permitting, Pole Replacement Design, Make-Ready Estimates, Field Survey Interpretation, CAD for Utility Design, GIS for Utility Design, Electrical Distribution Design, Utility Construction Standards, Telecommunications Make-Ready
Requirements:
WHAT WE’RE LOOKING FOR
• High school diploma or equivalent required; an associate degree or higher in engineering, drafting, or a related field is preferred
• Minimum 2 years of experience in make-ready engineering, joint-use design, or electric power distribution design (3+ years strongly preferred)
• Proven experience in utility pole design, including NESC application, clearance analysis, pole loading concepts, and preparation of construction-ready design packages
• Proficiency with CAD or MicroStation; experience with DDS, Katapult, O-Calc, or similar utility design platforms is strongly preferred
• Solid understanding of power distribution construction practices, with the ability to learn utility-specific proprietary systems efficiently
• Must hold a valid driver’s license, maintain active auto insurance, and pass all required background, drug, and MVR screenings
• Authorization to work in the United States is required
• Willingness to travel occasionally, including minimal overnight travel when project needs require
• Ability to work a standard Monday–Friday schedule aligned to Eastern Time, with Central/Mountain/Pacific adjustments as appropriate
PHYSICAL REQUIREMENTS
• Ability to work for extended periods using a computer keyboard, monitor, and telephone
• Ability to prepare and analyze data, review detailed information, and work with design tools requiring close vision, distance vision, color vision, peripheral vision, depth perception, and focus adjustment
• Ability to communicate effectively through oral and written channels
ABOUT SIGMA TECHNOLOGIES
Sigma Technologies is a growing engineering and design firm with 500+ team members across 30+ states. For over 25 years, we’ve supported major power and telecommunications utilities with work that directly impacts communities nationwide. Our core values — Safety, Honesty, Truth, and Decency — shape how we work and who we hire. We are TeamSigma™.
*To learn more about working at Sigma, view our video and career page.
* If you do not have Power Design experience, please refer to our other open positions: *While Designer openings are listed in multiple locations, you only need to apply to one, as they are remote roles.
WHAT WE OFFER
We want our Associates to stay healthy, happy, and secure. We offer a positive work environment with supportive coworkers, managers, and leaders, plus:
• No-cost monthly healthcare plan option for employees
• Competitive pay
• Medical, dental, and vision plans with up to 80% of the premium sponsored by Sigma
• 401(k) plan with matching contributions up to 5% of salary
• Paid holidays, vacation, and sick time
• Education and professional licensing assistance programs
This job advertisement is intended to outline the primary responsibilities and requirements of the role. It is not all-inclusive. Additional duties may be assigned as needed. This ad does not constitute an employment agreement, and job requirements may change based on organizational needs.
Pay is commensurate with experience and education. Sigma is an equal opportunity employer and does not discriminate based on race, color, gender, sexual preference, gender identity, age, religion, national origin, disability, genetic information, veteran/military status, or any classification protected by law.
PM22
PI80414dffc879-38
Remote working/work at home options are available for this role.
IDR is hiring for a 6 Month Contract to Hire Technical Product Owner
Join a leading organization in the data technology sector, where innovation and agility drive success. This fully remote role offers the opportunity to influence key data engineering initiatives, collaborating across diverse teams to deliver impactful digital products. If you're passionate about data solutions, thrive in fast-paced environments, and possess a strong technical acumen, this is your chance to make a difference and grow your career.
Position Overview for the Technical Product Owner:
• Act as a pivotal link between Data Engineering teams and business stakeholders to facilitate successful technology delivery across digital products
• Manage and prioritize data engineering product backlog, ensuring alignment with organizational objectives
• Author user stories and acceptance criteria, leading refinement sessions and sprint planning
• Lead Agile ceremonies including daily standups, sprint reviews, and retrospectives to ensure smooth delivery
• Utilize data and AI tools to analyze issues, optimize workflows, and maintain high quality in product artifacts
Requirements for the Technical Product Owner:
• Proven experience in stakeholder interaction and managing product backlogs in an Agile environment
• Strong documentation skills and the ability to communicate complex technical requirements effectively
• Proficiency with SQL, data engineering processes, and related technologies such as Azure SQL, Data Factory, SSIS, and Azure Data Lake
• Familiarity with Microsoft tech stack and data delivery tools is highly preferred
• Solid understanding of data engineering concepts and successful delivery of technical products
What's in it for you?
• Opportunity to work remotely with flexible hours, supporting a dynamic team that values innovation and autonomy
• Competitive pay rate of $60-68/hr, leading to an annualized salary of approximately $135,000 + 10% STIP
• Be part of a company with a strong focus on data-driven solutions and cutting-edge technology adoption
• Gain hands-on experience with AI-driven processes and advanced data engineering tools
Why IDR?
• 25+ Years of Proven Industry Experience in 4 major markets
• Employee Stock Ownership Program
• Dedicated Engagement Manager who is committed to you and your success
• Medical, Dental, Vision, and Life Insurance
• ClearlyRated's Best of Staffing Client and Talent Award winner 12 years in a row.
REMOTE
Remote working/work at home options are available for this role.
Job Title: Litigation & Transactional Attorney (Phoenix or 100% Remote)
About the Opportunity:
We are representing a premier, multi-decade established law firm with a Tier 1 Regional ranking. Known for their legal excellence in Banking, Bankruptcy, and Real Estate, this firm has built a reputation for providing high-quality representation through the aggressive use of technology and efficient team structures. We are seeking a motivated Attorney who wants to handle sophisticated matters while enjoying the flexibility of a modern work environment.
Why Join Us?
- Proven Legacy: Join a firm founded in 1987 with a 35+ year track record of success in Arizona and beyond.
- Flexible Work Model: This position is available for 100% remote work or a hybrid schedule in Phoenix, AZ.
- Peer-Recognized Excellence: Work alongside attorneys who are consistently selected to Super Lawyers and Best Law Firms lists.
- High-Stakes Exposure: Tackle complex trials, appeals, and multi-million dollar real estate transactions.
What You Will Do
- Represent clients in complex civil litigation, bankruptcy, and creditor rights matters.
- Handle various stages of commercial real estate transactions and finance law.
- Draft sophisticated legal documents, including trial briefs, appeals, and coverage opinions.
- Collaborate with a veteran team of partners on high-impact regional cases.
Qualifications
- Active member of the Arizona State Bar (or eligible for admission).
- Experience in Civil Litigation, Bankruptcy, or Real Estate Law.
- Strong research, writing, and analytical skills.
- Self-starter mentality with the ability to work effectively in a remote or hybrid capacity.
Salary and Other Compensation
The annual salary for this position is between $150,000 – $180,000. Factors which may affect pay within this range may include geography/market, skills, education, experience and other qualifications of the successful candidate.
Benefits
The Company offers the following benefits for this position, subject to applicable eligibility requirements:
Medical Insurance
Dental Insurance
Vision Insurance
401(k) Retirement Plan
Generous Paid Holidays Annually
Remote Work Technology Stipend
Professional Development and CLE Support
Remote working/work at home options are available for this role.