Engineering Standards Document Jobs Remote Jobs in Usa

The Broward County Board of County Commissioners is seeking qualified candidates for Engineering Unit Supervisor (Highway Construction and Engineering Division).

THIS JOB ANNOUNCEMENT WILL REMAIN OPEN UNTIL SUFFICIENT NUMBER OF APPLICATIONS ARE RECEIVED AND MAY CLOSE AT ANY TIME.



This position supports professionals responsible for managing capital and mobility advancement projects for Broward County's Highway Construction and Engineering Division. The ideal candidate will have experience coordinating with multiple entities, including municipalities, state agencies, and local authorities. Work involves the review, planning, and coordination of the design and construction of County capital and mobility advancement projects, including schedules, budgets, and staff assignments.

General Description
Performs advanced professional and supervisory engineering work in the design and review of a wide variety of engineering and environmental projects.
Works under administrative supervision, developing and implementing programs within organizational policies and reports major activities to executive level administrators through conferences and reports.
Minimum Education and Experience RequirementsRequires a Bachelor's degree from an accredited college or university with major coursework in civil engineering.

Requires six (6) years progressively responsible experience in professional engineering work related to roadway design and construction or closely related field, including two (2) years of supervisory experience.
Special Certifications and LicensesPossess and maintain Professional Engineer License in State of Florida for duration of assignment.

Preferences* Master's Degree in Civil Engineering, Public Administration or closely related field* Certified in the use of one (1) or more of the following engineering programs (i.e. ICPR, ASAD, HY-8, HEC-RAS, HEC-HMS, Synchro, HCS, IMSA), or similar
* Construction Training Qualification Program (CTQP) Certifications (Asphalt, Concrete, Earthwork, QC Manager, etc.)
* Professional Traffic Operations Engineer, Professional Surveyor & Mapper, General Contractor License, or similar
* Project Management Professional and/or Certified Public Manager
* Advanced Work Zone Traffic Control Training Certification
* At least ten (10) years of experience in design and construction of roadway/traffic projects
* At least five (5) years of experience in one (1) of the following specialized fields of engineering: Traffic Operations, Structures, Drainage, Geotechnical, Construction Management
* At least three (3) years of experience with MicroStation OpenRoads Designer (ORD)
* At least two (2) years of experience in governmental contract and procurement
* At least two (2) years of experience in the preparation of agenda items and/or resolutions

SCOPE OF WORK

The functions listed below are those that represent the majority of the time spent working in this class. Management may assign additional functions related to the type of work of the job as necessary.

Schedules, assigns, and supervises engineering design projects; directs and coordinates field surveys, plan design, preparation and review, cost estimate development, and specifications preparation; participates in the development and design and review of major and complex projects.

Supervises and participates in the analysis and review of engineering studies and designs prepared by professional consultants; prepares recommendations for the consideration of professional and administrative superiors and committees.

Supervises the preparation of right-of-way and construction plans for major thoroughfares; conducts studies and prepares reports on proposed locations for future major thoroughfares; maintains liaison with appropriate outside agencies concerning projects under consideration for construction.

Supervises and participates in the activities of construction engineers, inspectors, and materials technicians in the investigation and construction of water and sewer mains, roadways, structures, and related public work projects; prepares general and special specifications for contract construction; supervises the maintenance and analysis of payment estimates and records.

Oversees and performs the technical review of remedial action plans; oversees and administers environmental licensing programs.

Conducts special engineering studies and projects relating to technical and administrative aspects of the public works function; coordinates the utilization of computer technology as related to the engineering function.

Conducts long-range studies involving other departments, agencies, and organizations; prepares reports and recommendations; seals and signs engineering plans, drawings, and documents.

Performs related work as assigned.

Physical Demands

Physical demands refer to the requirements for physical exertion and coordination of limb and body movement.

Performs sedentary work that involves walking or standing some of the time and involves exerting up to 10 pounds of force on a regular and recurring basis or sustained keyboard operations.

Unavoidable hazards refer to the job conditions that may lead to injury or health hazards even though precautions have been taken.

Involves routine and frequent exposure to traffic; moving machinery.

Competencies

• Manages Complexity

• Decision Quality

• Balances Stakeholders

• Directs Work

• Plans and Aligns

• Optimizes Work Processes

• Ensures Accountability

• Builds Effective Teams

• Communicates Effectively

• Situational Adaptability

• Collaborates: Building partnerships and working collaboratively with others to meet shared objectives.
• Customer focus: Building strong customer relationships and delivering customer-centric solutions.
• Instills trust: Gaining the confidence and trust of others through honesty, integrity, and authenticity.
• Values differences: Recognizing the value that different perspectives and cultures bring to an organization.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Maintains a working knowledge of applicable federal, state and local laws, regulations and industry standards.  Complies with Trinity Health’s Organizational Integrity Program, Standards of Conduct, as well as other policies and procedures in order to ensure adherence in a manner that reflects ethical and professional integrity.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs services on specialized equipment in one or more of the following categories:  anesthesia machines, sterilizers, ventilators, ultrasound, laser, laboratory analyzers, etc.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users and Clinical Engineering Management of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, while working to accomplish team objectives and projects, and by soliciting feedback about one's effectiveness as a team member. 

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on deprartment guidelines)  to order parts and supplies required for  emergency service or repair of  radiological and general medical equipment. Recommends  test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provide on-call service coverage after normal business hours on a rotating basis.

Provides assistance and training to Bio-Medical Equipment Techs I and II as assigned by Clinical Engineering Manager.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Minimum of an Associates of Applied Sciences Degree in related field of medical electronics, electronic technology or equivalent military related training required.  CBET or CLET certification preferred.

Five or more years experience or equivalent performing corrective and planned  maintenance on medical devices and/or clinical equipment.

Specialized training by manufacturer or third party equipment repair in such areas as

      anesthesia machines, sterilizers, ultrasound, ventilators, laser, laboratory analyzers, etc.

Ability to demonstrate a high level of proficiency in specialty area.

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge  and ability to use basic hand tools and  test equipment specific to the field.  Ability to train CE associates on  use and application of test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, EOC, and other specific regulations and standards pertaining to clinical equipment service and repair.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with  ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and Clinical Engineering. 

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and the ability to input data using keyboard.  Technician must be able to  follow complex written instructions, perform tasks and document actions taken.

 Strong customer service and communications skills are required to interact with hospital  personnel and vendors to achieve positive outcomes.

Maintain up to date understanding of The Joint Commission and NFPA standards as well as state and federal regulations.

Ability to provide or coordinate in-service training to clinical/professional staff on medical device  operations and safety functions.

          .

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time). Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to  job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Project Management Organization / Corporate Services

This position is not eligible for recruiting or sourcing by outside parties.

Disclaimer: Be cautious and only respond to emails from our \" \" domain. We will never ask for sensitive information, such as bank account details, SSN, etc., via email. If you receive any communication asking for such information, it is not from Mesa. For any concerns, or to verify the authenticity of a message, please contact us through our official channels.

We've got the power to energize Your career and spark YOUR Work/Life Balance through professional development and exceptional benefits. Don't delay, plug in today for an inclusive meaningful career in power, distribution, transmission, engineering, design, technology, or innovation at Mesa Associates, Inc.

The primary functions of the Project Manager is to plan, manage, and implement engineering improvement projects with the objective of delivering improved engineering quality for the client by ensuring engineering processes, systems, and resources are integrated and optimized to achieve performance goals. The position requires a working knowledge of power industry design and construction practices, standards, and processes as well as the use of independent judgment, enhanced verbal and written communication skills, and ability to work with minimal supervision with the support of a team consisting of local and remote resources. The ideal candidate would have a Bachelor's or Associates degree in Engineering or Technology, Business, Construction Management, or related field from an accredited curriculum, and a minimum of eight years of relevant experience with at least two years' experience independently managing design or construction projects.

Desired PM Functions:

• Successfully deliver on rapid-response special projects, including but not limited to, gathering data, meeting with stakeholders and documenting findings, development of special reports, etc.
• Perform detailed project audits at various design stage gates
• Evaluate new engineering project scope documents, identify risks, develop response plans for implementation by the larger project team
• Identify, document, assign, track, and facilitate completion of improvement projects
• Manage continuous improvement opportunity information system, including intake of new opportunities, tracking and communicating of status, progress, and coordination with larger team to communicate barriers and get them resolved.
• Investigate high impact project issues and perform root cause analyses (RCA) to assist in driving continuous quality improvement efforts
• Work with information management and other resources to generate relevant reports and/or bulletins to communicate performance metrics, status of activities, etc.
• Identify target areas for improvement opportunities based on reports and results of audits, analyses, etc.
• Utilize outstanding interpersonal skills to provide guidance and mentorship to client resources according to needs identified in various reports.
• Initiate projects: Complete project planning documents, which include detailed scope/schedule outline for completion while looking for and finding ways to improve operations; process efficiency
• Project Definition: Assist Project Team in defining/clarifying project scope and level of detail required, satisfying customer expectations and projecting requirements.
• Maintain Project Status: Keep the project status reporting system current with the actions and changes that take place on assigned projects
• Manage Project Implementation: Leads assigned project team, ensuring that project goals/objectives are achieved, and all business processes and applicable procedures are followed
• Communicate effectively with project team, client, and 3rd parties as required to facilitate coordination of activities
• Coordinate/Communicate with peers: Work with project team to identify, document and resolve changes that may impact performance of projects

Knowledge, Skills, and Abilities:

• Capable of handling broad scope projects that have medium to long-term focus and applying knowledge to handle complex problems independently under the direction of a Program Manager and/or client management personnel.
• Possess solid verbal and written communications skills. Ability to coordinate with and interface with contractors, vendors, engineers, colleagues, and other electric utilities personnel at a high professional level
• Display strong interpersonal skills to build relationships and work effectively with clients, peers, and affiliates
• Strong capability in Microsoft Word and Excel
• Willingness to develop, promote and comply with Mesa and client safety requirements
• Ability to travel regionally to Northern Indiana for project requirements
• A background in substation design/engineering or transmission/distribution line design/engineering is preferred
• Ability to review project designs for potential problems and provide solutions that are consistent with industry, client, and internal standards
• Prioritize and schedule multiple tasks to meet project timelines

Notice to External Search Firms: Mesa Associates, Inc. and its subsidiaries do not accept unsolicited resumes and will not be obligated to pay a placement fee for unsolicited resumes. Mesa Associates, Inc. Talent Acquisition engages with approved search firms directly for specific hiring needs.

Intermediate

Intermediate

Intermediate

Intermediate

Intermediate

Intermediate

Intermediate

Intermediate

Devoted to a task or purpose with loyalty or integrity

Works well as a member of a group

Capable of carrying out a given task with all details necessary to get the task done well

Consistently introduces new ideas and demonstrates original thinking

Inspired to perform without outside help

Inspired to perform well by the ability to contribute to the success of a project or the organization

Inspired to perform well by an ability to drive new ventures within the business

Associates or better in Engineering or related field.

Bachelors or better in Business Administration or related field.

Bachelors or better in Engineering or related field.

Electric utility design / engineering

design / engineering, technology, process, quality, or similar industries

Project Mgmt Prof (PMP)

Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do.

Our employees are unified in a shared dedication to our customers' mission and quest for professional growth.

L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success.

Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do.

L3Harris is the Trusted Disruptor in defense tech.

With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.

Job Title: Sr.

Specialist, Integration & Test Engineering (Space Optical Systems) Job Code: 33755 Job Location: Wilmington, MA Job Schedule: 9/80 (Every other Friday off!) Relocation: Relocation assistance is available to qualified applicants Job Description: On the L3Harris team, your job is to secure the world.

We don't work here just for the advanced technology and equipment: we work here because we know what
- and who
- we're protecting! From families to the intelligence community, and from our climate to our men and women in uniform
- we're making the world a safer place! L3Harris Space Superiority group has an opening for a Integration & Test Engineer to join our team of qualified, diverse individuals.

This position will be in Wilmington, MA.

The individual will work in a fast-paced environment with significantly diverse assignments and a collaborative team setting.

AgileEO specializes in space-based, small aperture visible and IR telescopes with integrated electromechanical devices used for motion and focus control.

The successful candidate will support the program technical leads (Lead or Chief Systems Engineer, IPT Lead) by performing technical analysis, managing specifications, and generating design review and technical documents.

Additional responsibilities include supporting the test and design verification, requirements sell off, end item data package (EIDP) generation efforts.

Essential Functions:
* System Design and Integration: Develop and integrate advanced electro-optical systems for space-based applications, ensuring compliance with all relevant specifications and mission requirements.
* Technical Leadership: Provide technical leadership and guidance in systems engineering, including test development, requirements verification and validation (V&V).
* Testing and Validation: Design, plan, and execute test procedures for electro-optical components and systems.

Analyze test data to validate system performance against requirements.

Identify and troubleshoot issues, propose corrective actions, and implement solutions.
* Requirements Management: Define, manage, and maintain system and sub-system level requirements, ensuring traceability and compliance throughout the project lifecycle.
* Project Execution: Lead and coordinate multidisciplinary engineering teams throughout the project lifecycle, from conceptual design to final system delivery and operation.
* Documentation and Reporting: Generate and maintain detailed technical documentation, including test plans, procedures, work instructions, test reports, and anomaly reports.
* Trade Studies: Develop and evaluate trade studies to support decision-making processes, ensuring accuracy and completeness.
* Stakeholder Communication: Communicate effectively with internal and external stakeholders, including subcontractors and U.S.

Government customers, to ensure alignment and project success.
* Standards Compliance: Ensure all engineering activities adhere to industry standards, regulatory requirements, and best practices.
* Collaboration: Work closely with cross-functional teams, including engineering, production, and quality assurance, to ensure successful system integration and test.
* Written and Oral Communication: Demonstrate excellent written, oral, and presentation communication skills.

Prepare effective presentations to communicate technical information to non-technical professionals.
* Continuous Improvement: Participate in process improvement initiatives to enhance test methodologies and system integration practices.
* Candidate must be eligible to obtain a DoD security clearance.

Qualifications:
* Bachelor's degree in Engineering, Physics, or other related scientific discipline and 6 years of relevant EO/IR systems engineering work experience.

Alternatively, a graduate degree with a minimum of 4 years of prior related experience, or in lieu of a degree, a minimum of 10 years of prior related experience.
* 3+ years experience working with systems integration and test
* Prior or current experience working with eletro-optical/imaging systems
* Prior or current experience working with space environment considerations and testing protocols
* 3+ years experience with engineering and simulation software tools, such as MATLAB Preferred Additional Skills:
* Active Secret or Top Secret/SCI clearance is highly preferred
* Demonstrated experience with space systems engineering, including knowledge of space environments, satellite systems, and space mission design.

Familiarity with NASA-STD-1540 and/or NASA-STD-7002.
* Experience in leading technical teams, managing projects, and coordinating cross-functional engineering activities.
* Proficient in Model-Based Systems Engineering (MBSE) tools such as DOORs, CAMEO, CREO, JIRA, and SysML.
* Excellent verbal and written communication skills, with the ability to clearly convey complex technical information to diverse audiences.
* Strong analytical and problem-solving abilities, with a proven track record of tackling complex engineering challenges.
* Ability to work effectively in a team environment and collaborate with multidisciplinary teams to achieve project goals.
* Working knowledge of Microsoft Word, Excel, Visio, PowerPoint, and other relevant In compliance with pay transparency requirements, the salary range for this role in Massachusetts is $1119,500
- $222,500 .

This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location.

L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays.

The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements.

L3Harris Technologies is proud to be an Equal Opportunity Employer.

L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination.

All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws.

L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.

Please be aware many of our positions require the ability to obtain a security clearance.

Security clearances may only be granted to U.S.

citizens.

In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.

By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.

L3Harris Technologies is an E-Verify Employer.

Please click here for the E-Verify Poster in English ( ) or Spanish ( ) .

For information regarding your Right To Work, please click here for English ( ) or Spanish ( ) .

Director to VP of Process/Manufacturing & Engineering

Location: Seattle, WA / Reports to: Chief Executive Officer (CEO)

The core of this position is someone who has directly taken a chemical or process manufacturing technology from early stage development through pilot and into commercial production. Specifically someone who has scaled a process based manufacturing system, liquids, heat, pressure, continuous or batch processing, from benchtop or pilot scale to revenue generating commercial scale.

Must have

• Direct experience scaling a process-based manufacturing system from pilot or bench scale to commercial production, ideally with clear quantifiable outcomes.

Strong preference

• Experience doing this scale-up within a startup or resource-constrained environment.
• Background in chemical or process engineering rather than mechanical or discrete manufacturing.
• Experience building operational, quality, and production infrastructure during the early commercialization phase.
• Quantifiable impact metrics around scaling chemical processes. This can take a few different forms, " X size pilot to first $Y M/yr commercial production\" or "Increased production Z%" etc.

Further, someone who has operated across engineering, supply chain, and operations, a true "operations-oriented engineer." High level of independence and drive, ideally someone who proactively flags risks, pushes timelines, and takes ownership of execution.

This is a senior, execution-focused leader, responsible for translating our technology into safe, reliable, on-spec, and cost-disciplined production at scale via our external partner network. You will own the production and engineering strategy, including leading technology transfer, managing contract manufacturer (CM) performance, and driving EPC execution for facility expansion while working with executive leadership to set the strategy for continuous improvement and a large-scale manufacturing network. You will serve as the primary commercial and technical bridge between internal innovation team and the manufacturing environment. This role requires a leader who is equally comfortable turning a wrench, reviewing P& IDs, negotiating multi-million-dollar MSAs, and acting as the owner's representative & quote, on major capital projects.

What You'll Do

1. Strategic Technology Transfer and Scale-up

○ Lead the 'Bench-to-Plant' Interface: Manage the technical hand-off from internal development to external partners, ensuring processes are robust, documented, and ready for commercial-scale production.

○ Scale-Up Oversight: Steward production, quality, and throughput during the critical transition from pilot to commercial runs, troubleshooting as necessary

○ Process Integrity: Ensure high standards for quality and yield is maintained when processes leave our internal control and enter our partner network.

○ Manage all aspects of technology transfer from R&D to contract manufacturing partners, driving tonnage-scale, on-spec production.

○ Planning for Velocity: properly scope and strategically plan timelines to maintain a venture backed pace for scale-up

2. Contract Manufacturing Ownership and Commercial Strategy

○ Commercial Negotiation: Lead the negotiation of Master Service Agreements (MSAs), tolling fees, and other manufacturing contracts. You are responsible for structuring deals that align incentives and protect our interests.

○ Partner Management: Serve as the single point of accountability for CM relationships. Set, track, and enforce KPIs for quality, OTIF delivery, and yield.

○ COGs Ownership: Own the external production cost model and rigorously define cost drivers and partner with the finance team to forecast scenarios and define and refine unit economics.

3. EPC Leadership and Scale Up

○ Project Delivery Strategy: Select and manage the appropriate project delivery model (e.g. Design-Bid-Build vs EPCM) and lead the selection of EPC vendors

○ Front-End Definition: Provide rigorous oversight of FEL/FEED stages to lock in scope before capital commitment.

○ Owner's Representative: Act as primary "Owner's Rep" for all capital projects, holding external firms accountable for schedule, cost, quality, and safety performance, serving as decision maker of change orders.

○ Own the Build: Oversee the physical execution of facility upgrades or new builds, ensuring a seamless handover to operations.

○ Provide technical input into the strategy of where and how to manufacture product to support business growth

4. Quality, Safety, and Risk Management

○ EHS Compliance: Audit and enforce safety standards at CM and any external sites where we are operating.

○ Supply Chain Risk: Identify point of failure in our external network and develop contingency plans for capacity and logistics

○ Quality: Own and maintain Ravel's quality management framework, including oversight of SOPs, documentation, and continuous improvement across internal operations and external partner.

What You'll Bring

● B.S. or M.S. in Chemical Engineering, Process Engineering, Materials Science, Mechanical Engineering, Industrial Engineering, Chemistry or a closely related discipline, or equivalent experience gained through progressive responsibility in manufacturing operations. A PhD or MBA is a strong plus.

● 10+ years' experience in chemical/process manufacturing, technology transfer, and/or contract manufacturing at pilot or commercial scale.

● Capital Projects Fluency: Demonstrated experience acting as the "Owner" on a capital project ($20M+). You understand the difference between FEL 1/2/3 and know how to control TIC.

● Commercial Acumen: Strong experience negotiating tolling agreements, joint development agreements, and construction contracts. You know how to structure a deal to protect IP and cash risk.

● Technical Authority: Ability to read PFDs/P&IDs and challenge engineering partners on design.

● Willingness to Travel: This role requires being present where the work is, at CMs and construction sites (approx 30-50% travel)

This is an opportunity to own manufacturing strategy and execution at a company scaling breakthrough technology into the real world. You will shape how we manufacture globally, with executive-level accountability for cost, quality, delivery, and facilities, and play a central role in the company's next phase of growth.

Join a passionate, visionary team as we build a future where textile production and consumption are part of a sustainable, closed-loop system.

Traits and Characteristics:

● Hustle

● Team player (our team)

● Positive attitude

● 100% integrity

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do.

L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.

Job Title: Senior Specialist, Mechanical Engineering
Job Code: 33186
Job Location: Waco, TX (Onsite)
Job Schedule: 9/80

Mechanical engineers at L3Harris have the opportunity to engage in a wide variety of design activities over a broad range of aircraft (both fixed-wing and rotary-wing). Mechanical engineers are responsible for developing designs ranging from the integration of state-of-the-art airborne systems into special mission aircraft to developing specialized aircraft modifications. Engineers utilize 3D parametric CAD, rapid prototyping and other tools in the development of designs and validation of those designs. Engineers will produce technical drawings, procedures and other documents to thoroughly define the design. As an L3Harris engineer you will be involved in all phases of the product design, including concept development, detail design, manufacturing, installation on the aircraft and follow up with the customer.

• Design and liaison of aircraft primary and secondary structure utilizing military and commercial design standards, customer specifications and system requirements documents utilizing 3-dimensional CAD.
• Provide liaison to production and manufacturing for interpretation of engineering design/drawings.
• Conducting engineering drawing preparation and release within allocated schedule and budget constraints.
• Generating bids for customer requested change orders and new pursuits.
• Documenting and reviewing designs with peers, management, and customers.
• Strong knowledge of mechanical design principles for aircraft structure and components.
• Strong analytic and communication skills.
• Ability to work in aircraft and in an aircraft hangar environment. Ability to climb/board and work inside aircraft. Ability to bend, stoop, balance, kneel, crouch, reach, push, pull, grasp. Ability to work in narrow aisles or passageways.
• Ability to obtain and maintain a security clearance.
• Willingness and ability to work any shift, weekends, and overtime as required.
• Willingness and ability to travel as required (
  • Bachelor's Degree in Mechanical Engineering or Aeronautical Engineering (or equivalent field) and minimum 6 years prior related experience. Graduate Degree with a minimum of 4 years of prior related experience. In lieu of a degree, minimum of 10 years of prior related experience.
  • Minimum 4 years experience with the use of 3D CAD programs to create solid models and 2D detail, assembly, and installation drawings.
  • Minimum 4 years experience with basic Microsoft Office software applications including Word and Excel.
  • Must be a U.S. citizen
  
  Preferred Additional Skills:
  • Active DoD Secret security clearance
  • Mid-level knowledge of 3D CAD tools:
    • Creo Parametric, Siemens NX or equivalent
  • Familiarity with aircraft and military design standards such as:
    • SAE AS50881, MIL-STD-704, MIL-E-7016, SAE ARP4754, MIL-STD-461, MIL-STD-810, MIL-STD-882, MIL-HDBK-516
  • Ability to manage budgets and schedules, serve as a task leader within the team, and mentor junior team members for integration design and liaison.
  
  #LI-AS1

  L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.

  Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.

  By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.

  L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.

Rite-Hite is the global leader in the manufacture and distribution of industrial loading dock and door equipment. Our innovative products and world class sales organization ensure solid, consistent growth, both for our company and our staff. We are always looking ahead to develop innovative new products and services to improve our customers' safety, security, and productivity.

Rite-Hite provides competitive compensation and a comprehensive benefits package with medical, dental, and vision coverage along with life and paid medical leave. We also provide a retirement savings plan that combines 401(K) with company match and profit sharing. Paid holidays, vacation, and up to five paid personal/sick days per year round out the package.

Rite-Hite is an Equal Opportunity/Affirmative Action employer offering a drug free workplace for our customers and employees.

We are seeking a motivated and detail-oriented Electrical Engineering Intern to join our team at our manufacturing facility in Dubuque, IA. In this role, you will support electrical engineering staff in the design, testing, analysis, and improvement of electrical systems, components, and products. This internship provides hands-on experience with real-world electrical engineering applications and the opportunity to apply academic knowledge in a professional environment.

Essential Duties and Responsibilities

• Assist electrical engineers with the design, development, and testing of circuits, control systems, and electronic components.
• Perform data collection, signal analysis, and documentation to support ongoing electrical engineering projects.
• Create, update, and review electrical schematics, wiring diagrams, PCB layouts, and technical reports.
• Conduct research on electrical components, emerging technologies, and engineering methods as assigned.
• Support troubleshooting, root-cause analysis, and quality checks on electrical systems or prototypes.
• Participate in design reviews, project meetings, and technical presentations.
• Follow company safety procedures, electrical standards (e.g., NEC, IEC), and engineering best practices.

Education and/or Experience

• Currently pursuing a bachelor's degree in Electrical Engineering or a closely related field.
• Strong analytical, mathematical, and problem-solving skills.
• Familiarity with electrical engineering tools, laboratory equipment, and simulation software.
• Effective communication and teamwork abilities.
• Willingness to learn and adapt in a fast-paced engineering environment.

Preferred Qualifications

• Experience with tools such as MATLAB, LTspice, PSpice, Simulink, LabVIEW, Python, or CAD for electrical design (e.g., Altium, KiCad, AutoCAD Electrical).
• Hands-on project, lab, or internship experience in circuits, electronics, power systems, or embedded systems.
• Knowledge of electrical safety standards, PCB design principles, or relevant technical concepts (e.g., signal processing, control systems, microcontrollers)

Additional Job Information:

Georgia Tech prides itself on its technological resources, collaborations, high-quality student body, and its commitment to building an outstanding and diverse community of learning, discovery, and creation. We strongly encourage applicants whose values align with our institutional values, as outlined in our Strategic Plan. These values include academic excellence, diversity of thought and experience, inquiry and innovation, collaboration and community, and ethical behavior and stewardship. Georgia Tech has policies to promote a healthy work-life balance and is aware that attracting faculty may require meeting the needs of two careers.

About Georgia Tech
Georgia Tech is a top-ranked public research university situated in the heart of Atlanta, a diverse and vibrant city with numerous economic and cultural strengths. The Institute serves more than 45,000 students through top-ranked undergraduate, graduate, and executive programs in engineering, computing, science, business, design, and liberal arts. Georgia Tech's faculty attracted more than $1.4 billion in research awards this past year in fields ranging from biomedical technology to artificial intelligence, energy, sustainability, semiconductors, neuroscience, and national security. Georgia Tech ranks among the nation's top 20 universities for research and development spending and No. 1 among institutions without a medical school.

Georgia Tech's Mission and Values
Georgia Tech's mission is to develop leaders who advance technology and improve the human condition. The Institute has nine key values that are foundational to everything we do:
1. Students are our top priority.
2. We strive for excellence.
3. We thrive on diversity.
4. We celebrate collaboration.
5. We champion innovation.
6. We safeguard freedom of inquiry and expression.
7. We nurture the wellbeing of our community.
8. We act ethically.
9. We are responsible stewards.

Over the next decade, Georgia Tech will become an example of inclusive innovation, a leading technological research university of unmatched scale, relentlessly committed to serving the public good; breaking new ground in addressing the biggest local, national, and global challenges and opportunities of our time; making technology broadly accessible; and developing exceptional, principled leaders from all backgrounds ready to produce novel ideas and create solutions with real human impact.

Provide engineering services in support of systems and equipment associated with research efforts within an academic or research unit or laboratory. Specific duties will be determined based on assignment and unit needs. This position will interact on a consistent basis with: unit management and staffThis position typically will advise and counsel: unit management and staffThis position will supervise: NA

• Assist engineers and technicians with mechanical/electrical testing
• Assist engineers and technicians with data analysis and reporting
• Operate testing and machine equipment
• Perform basic laboratory maintenance

Job Duty 1 -
Participate in the design, installation and testing of systems and components.

Job Duty 2 -
Develop engineering project schedules, plans, and specifications for systems and components.

Job Duty 3 -
Conduct analyses of system performance; prescribe corrective action where required.

Job Duty 4 -
Troubleshoot systems; may involve calibration and repair work.

Job Duty 5 -
Prepare drawings, schematic diagrams and other documentation associated with components and systems.

Job Duty 6 -
Provide input to and administer project engineering budgets.

Job Duty 7 -
Interact with vendors regarding procurement and delivery issues.

Job Duty 8 -
Participate in project reviews for conformance to quality standards and compliance with applicable codes and regulations.

Job Duty 9 -
Perform other duties as assigned

Educational Requirements
Bachelor's Degree in Engineering field, or equivalent combination of education and experience

Other Required Qualifications
Valid Driver's license This is a temporary position, limited to 1300 hours or 12 consecutive months, and subject to ACA and GT guidelines for temporary employment.

Required Experience
Up to two years of job related experience

Additional Preferred Qualifications
Professional Engineer (PE)

Demonstrated hands-on experience through internships or similar experiences

SKILLS
This job requires application of engineering principles, processes and practices; application of regulations, codes and safety practices; utilization of basic and advanced computer applications including those specific to areas of responsibility; communication skills.

The University System of Georgia is comprised of our 26 institutions of higher education and learning as well as the System Office. Our USG Statement of Core Values are Integrity, Excellence, Accountability, and Respect. These values serve as the foundation for all that we do as an organization, and each USG community member is responsible for demonstrating and upholding these standards. More details on the USG Statement of Core Values and Code of Conduct are available in USG Board Policy 8.2.18.1.2 and can be found on-line at policymanual/section8/C224/#p8.2.18_personnel_conduct.

Additionally, USG supports Freedom of Expression as stated in Board Policy 6.5 Freedom of Expression and Academic Freedom found on-line at policymanual/section6/C2653.

The Georgia Institute of Technology (Georgia Tech) is an Equal Employment Opportunity Employer. The Institute is committed to maintaining a fair and respectful environment for all. To that end, and in accordance with federal and state law, Board of Regents policy, and Institute policy, Georgia Tech provides equal opportunity to all faculty, staff, students, and all other members of the Georgia Tech community, including applicants for admission and/or employment, contractors, volunteers, and participants in institutional programs, activities, or services. Georgia Tech complies with all applicable laws and regulations governing equal opportunity in the workplace and in educational activities.

Equal opportunity and decisions based on merit are fundamental values of the University System of Georgia (USG) and Georgia Tech. Georgia Tech prohibits discrimination, including discriminatory harassment, on the basis of an individuals race, ethnicity, ancestry, color, religion, sex (including pregnancy), national origin, age, disability, genetics, or veteran status in its programs, activities, employment, and admissions. Further, Georgia Tech prohibits citizenship status, immigration status, and national origin discrimination in hiring, firing, and recruitment, except where such restrictions are required in order to comply with law, regulation, executive order, or Attorney General directive, or where they are required by Federal, State, or local government contract.

This is not a supervisory position.
This position does not have any financial responsibilities.
This position will be required to drive.
This role is not considered a position of trust.
This position does not require a purchasing card (P-Card).
This position will not travel
This position does not require security clearance.

*At Securian Financial the internal position title is Infrastructure Dir."

Mission

"To lead the engineering discipline that ensures Securian's technology platforms and cloud services are built and operated with uncompromising resilience, performance, and quality. This role drives the design and automation of fault-tolerant, high-availability architectures across AWS, Azure, and GCP-ensuring the enterprise meets resiliency, scalability, and efficiency expectations at every layer of technology."

Positioning

The Director of Resilience Engineering and Quality Leader is both a strategic peer and technical counterpart to the Infrastructure & Reliability Engineering Leader.

This role provides bench depth and succession coverage for REO's most technically complex domains while driving innovation in reliability, resilience, and performance practices.

• Strategic influence: Shapes cloud reliability, quality engineering, and resilience strategy across REO and Architecture domains.

• Operational authority: Leads Sr. Managers and Managers who own the execution of quality, resilience, and performance engineering capabilities.

• Enterprise collaboration: Works hand-in-hand with Technology, Solution, Business, Data, and Enterprise Architects to embed reliability and resilience as core architecture principles.

Scope of Accountability

Resilience Engineering & Cloud Reliability

• Architect and validate fault-tolerant, regionally resilient architectures across AWS, Azure, and GCP.

• Own resilience automation, chaos testing, and IaC-based recovery validation.

• Lead cross-cloud reliability design reviews and failure-mode analyses for critical systems.

Quality Engineering & Continuous Testing

• Define enterprise-wide quality engineering strategy integrated into CI/CD pipelines.

• Drive automation-first testing (functional, non-functional, performance, resilience).

• Embed observability-driven quality validation and contract testing across services.

Performance, Capacity & Efficiency Engineering

• Oversee predictive capacity planning, scaling automation, and cost/efficiency optimization (FinOps/GreenOps).

• Partner with Platform & Infrastructure teams to tune performance across application and platform layers.

• Measure and report on performance SLIs/SLAs aligned to REO's Reliability Metrics framework.

Cross-Domain Architecture Collaboration

• Partner with Enterprise Architects to codify resilience and reliability standards in technology blueprints.

• Collaborate with Technology & Solution Architects to design service reliability into delivery architectures.

• Engage Data Architects for data resilience, replication, and pipeline reliability.

• Work with Business Architects to align technical reliability goals with critical business outcomes.

Leadership & Talent Development

• Lead a team of Sr. Managers and Managers, fostering a high-performance, hands-on engineering culture.

• Build and mentor top-tier technical talent in cloud reliability, resilience, and quality automation.

• Partner with HR and REO Enablement to develop succession plans and technical competency frameworks.

Core Technical Competencies

• AWS (primary) - Multi-account design, HA architecture, region failover, resilience automation, Terraform/CDK/CloudFormation.

• Azure & GCP (secondary) - Compute, networking, and reliability constructs; hybrid cloud design and failover integration.

• Infrastructure as Code (IaC) - Deep proficiency in Terraform, policy-as-code (OPA/Conftest), drift detection, pipeline integration.

• Reliability & Chaos Engineering - AWS Fault Injection Simulator, Gremlin, steady-state hypothesis design.

• Observability & Quality Automation - OpenTelemetry, Prometheus, CloudWatch, K6, Gatling; CI/CD quality gates and dashboards.

• Performance Engineering - Load, stress, and soak testing automation; performance profiling and SLO alignment.

• Disaster Recovery Automation - Cross-region orchestration, IaC-driven DR runs, replication validation.

• FinOps/GreenOps - Cloud cost and efficiency automation, carbon-aware scaling policies.

Leadership Competencies

• Strategic Technical Leadership: Operates at the intersection of deep engineering and executive strategy.

• Multi-Domain Collaborator: Integrates reliability and resilience across architecture, operations, and business domains.

• Talent Multiplier: Develops and empowers senior managers, fostering engineering mastery and innovation.

• Credible Technical Authority: Trusted peer to Infrastructure & Reliability Engineering; capable of leading architecture reviews and executive briefings.

• Change Champion: Drives transformation of reliability practices across platforms, pipelines, and teams.

Qualifications & Experience

• 12+ years in cloud engineering, reliability, or platform leadership roles.

• 5+ years leading Sr. Managers/Managers in technical domains.

• Proven expertise across AWS, with working knowledge of Azure and GCP.

• Experience with multi-cloud governance, DR design, IaC at scale, and reliability automation.

• Strong understanding of observability, SRE principles, and REO/ITIL-aligned reliability frameworks.

• Certifications:

  • Required: AWS Certified Solutions Architect - Professional

  • Preferred: AWS DevOps Engineer, Azure Solutions Architect Expert, Google Professional Cloud Architect

Success Metrics

• 99.9% availability maintained for Tier-1 workloads.

• 100% coverage of DR automation for Tier-1 services.

• 25% annual increase in automated quality/test coverage.

• 15% annual improvement in resource efficiency and cost performance.

• Documented resilience participation across all enterprise architecture blueprints.

• Positive "technical peer readiness" and succession rating from Head of REO.

Summary Value Proposition

This Director role blends deep AWS reliability engineering expertise, multi-cloud technical breadth, and leadership scale.

It ensures REO maintains both technical depth and leadership redundancy, and it strengthens the bridge between engineering execution and enterprise architecture alignment.

#LI-hybrid **This position will be in a hybrid working arrangement.**

Securian Financial believes in hybrid work as an integral part of our culture. Associates get the benefit of working both virtually and in our offices. If you're in a commutable distance (90 minutes), you'll join us 3 days each week in our offices to collaborate and build relationships. Our policy allows flexibility for the reality of business and personal schedules.

The estimated base pay range for this job is:

Pay may vary depending on job-related factors and individual experience, skills, knowledge, etc. More information on base pay and incentive pay (if applicable) can be discussed with a member of the Securian Financial Talent Acquisition team.

Be you. With us. At Securian Financial, we understand that attracting top talent means offering more than just a job - it means providing a rewarding and fulfilling career. As a valued member of our high-performing team, we want you to connect with your work, your relationships and your community. Enjoy our comprehensive range of benefits designed to enhance your professional growth, well-being and work-life balance, including the advantages listed here:

Paid time off:

• We want you to take time off for what matters most to you. Our PTO program provides flexibility for associates to take meaningful time away from work to relax, recharge and spend time doing what's important to them. And Securian Financial rewards associates for their service by providing additional PTO the longer you stay at Securian.

• Leave programs: Securian's flexible leave programs allow time off from work for parental leave, caregiver leave for family members, bereavement and military leave.

• Holidays: Securian provides nine company paid holidays.

Company-funded pension plan and a 401(k) retirement plan: Share in the success of our company. Securian's 401(k) company contribution is tied to our performance up to 10 percent of eligible earnings, with a target of 5 percent. The amount is based on company results compared to goals related to earnings, sales and service.

Health insurance: From the first day of employment, associates and their eligible family members - including spouses, domestic partners and children - are eligible for medical, dental and vision coverage.

Volunteer time: We know the importance of community. Through company-sponsored events, volunteer paid time off, a dollar-for-dollar matching gift program and more, we encourage you to support organizations important to you.

Associate Resource Groups: Build connections, be yourself and develop meaningful relationships at work through associate-led ARGs. Dedicated groups focus on a variety of interests and affinities, including:

• Mental Wellness and Disability

• Pride at Securian Financial

• Securian Young Professionals Network

• Securian Multicultural Network

• Securian Women and Allies Network

• Servicemember Associate Resource Group

For more information regarding Securian's benefits, please review our Benefits page.

This information is not intended to explain all the provisions of coverage available under these plans. In all cases, the plan document dictates coverage and provisions.

Securian Financial Group, Inc. does not discriminate based on race, color, religion, national origin, sex, gender, gender identity, sexual orientation, age, marital or familial status, pregnancy, disability, genetic information, political affiliation, veteran status, status in regard to public assistance or any other protected status. If you are a job seeker with a disability and require an accommodation to apply for one of our jobs, please contact us by email at , by telephone (voice), or 711 (Relay/TTY).

To view our privacy statement click here

To view our legal statement click here