Engineering Specifications Jobs in Usa
10,006 positions found — Page 5
Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth.
L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success.
Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do.
L3Harris is the Trusted Disruptor in defense tech.
With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.
Job Title: Scientist, Integration and Test Engineering (CITE) Job Code: 33805 Job Location: Palm Bay, FL Job Schedule: 9/80 (Every other Friday off) Job Description: The Chief Integration & Test Engineer (CITE) will oversee system verification and test planning for the integration of the spacecraft bus, mission payload, and communication payload, culminating in end-to-end testing.
Responsibilities include leading a team of I&T engineers through the product life cycle, from initial requirement analysis for testability to designing and developing test plans and flows.
Additionally, this role involves defining, planning, and implementing strategies for test, verification, validation, qualification, and acceptance testing.
Essential Functions: Provide mastery-level system integration and test engineering expertise to a team.
Lead space hardware and software integration and verification testing at acceptance, proto-flight, and qualification levels for all relevant environments (vibration, thermal, vacuum) Develop verification plans, test procedures, and test flows, and lead the execution of test procedures.
Document test results in reports to ensure system requirements are met.
Lead requirements verification for components, subsystems, and systems.
managing the Test Bed and Simulators used during integration and test activities.
Identify and resolve technical issues and anomalies during integration and testing, collaborating with cross-functional teams to address discrepancies.
Collaborate with cross-discipline teams (systems, mechanical, structural, thermal, power, optical, RF, electrical) in development, integration, and execution.
Represent Space Integration & Test engineering during major system level design reviews including System Requirements Review (SRR), Preliminary Design Reviews (PDR), Critical Design Reviews (CDR), and Test Readiness Reviews (TRR), and Pre-Shipment Review (PSR) Qualifications: Bachelor’s Degree and a minimum of 12 years of engineering experience.
Graduate Degree and a minimum of 10 years of engineering experience.
In lieu of a degree, a minimum of 16 years of engineering experience Experience with system-level space requirements verification, including allocation, testability, flow down, analysis, testing, and demonstration.
Experience executing all phases of space vehicle programs (SRR, PDR, CDR, IRR, TRR, PSR, etc.) Experience with space hardware/software integration, testing, and troubleshooting Experience with Flat Sats and simulators Secret Clearance Preferred Additional Skills: Technical leadership experience in an SI&T role Experience designing Mechanical Ground Support Equipment (MGSE) and/or Electrical Ground Support Equipment (EGSE) for large space vehicles.
Strong understanding in space vehicle subsystem designs: Power, Thermal, Communications (Optical or RF), Data Management, Structures, Mechanisms, GNC, Propulsion, Configuration/Packaging, Software, Fault Management, Harness Proficiency with Interface Definition Documents (IDDs) and Interface Control Drawings (ICDs) Expertise in requirements management, traceability, and verification using IBM Rational DOORS and MBSE tools (CAMEO) Experience directly interfacing with customers (both prime contractors and end customers) to resolve technical issues during the development and sell-off of space hardware.
Experience in risk management LI-KB1 LI-KB1 L3Harris Technologies is proud to be an Equal Opportunity Employer.
L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination.
All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws.
L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.
Please be aware many of our positions require the ability to obtain a security clearance.
Security clearances may only be granted to U.S.
citizens.
In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.
By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.
L3Harris Technologies is an E-Verify Employer.
Please click here for the E-Verify Poster in English or Spanish.
For information regarding your Right To Work, please click here for English or Spanish.
Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth.
L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success.
Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do.
L3Harris is the Trusted Disruptor in defense tech.
With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.
Job Title: Lead, Integration & Test Engineer Job Code: 33682 Job Location: Palm Bay, FL Job Schedule: 9/80 Job Description: The PLM Integration and Test Lead designs, develops the overall integration and testing scheme/approach for the new PLM development and then manages the overall integration and testing activates of the PLM team to ensure PLM capabilities function as an element and within the integrated L3Harris system with high quality and reliability for sustained business success.
Essential Functions: Leads the design and development of the Integration and test plan with the PLM Leads Develops and manages overall Test and Integration Plan and leads implementation and tracking of the plan for the PLM DT Drives a Design for Test and Integration mindset in the overall PLM Team Ensures each capability is functionally validated and performance achieved in the integrated system for successful business execution Leads team in the development of efficient and robust test methodologies Organizes use cases and scenarios to test Grades and ranks test and integration activities to enable prioritization based on risk, criticality, etc Leads teams in conducting independent Failure Modes Effects Analysis of IT Vendor designs to identify high risk, high probability modes of failure, prioritize importance and mitigation activities Leads interface between L3Harris functional I&T team execution and IT/contractor developing and setting reporting workflow and expectations for individual capability working groups Manages the troubleshooting interface with IT and vendors Track and monitors and reports functional progress of test and integration Manages, tracks and reports functional integration and test activities status Organizes program and business specific I&T activities Qualifications: Bachelor’s Degree (in Engineering, Computer Science, or related technical field) and minimum 9 years of prior relevant experience.
Graduate Degree and a minimum of 7 years of prior related experience.
In lieu of a degree, minimum of 13 years of prior related experience Experience in large-scale PLM implementation, development, test or migration projects.
Experience with mechanical and electrical engineering design processes, configuration management principles, and product data management.
Experience with a major PLM platform and its integration with major MCAD and ECAD tools.
Preferred Additional Skills: Familiarity with the specific challenges and requirements of the Aerospace & Defense (A&D) industry TS/SCI Clearance LI-KB1 L3Harris Technologies is proud to be an Equal Opportunity Employer.
L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination.
All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws.
L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.
Please be aware many of our positions require the ability to obtain a security clearance.
Security clearances may only be granted to U.S.
citizens.
In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.
By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.
L3Harris Technologies is an E-Verify Employer.
Please click here for the E-Verify Poster in English or Spanish.
For information regarding your Right To Work, please click here for English or Spanish.
Jabil is seeking a Senior Manager, Manufacturing Test Development for our Austin, TX location who will directly contribute to the transformative growth within our Intelligent Infrastructure division by applying unique and innovative approaches to developing end customer product solutions.
You will be responsible for managing the technical direction of Rack scale test software and integration development programs through the lens of the customer, factory, and services. You will also be responsible for partnering and collaborating with Hyperscale & AI customers, strategic suppliers, internal engineering, product management, program management, manufacturing, test and quality teams to ensure your products meet the rigorous standards and performance expectations of Jabil’s world-class manufacturing environments and our customers.
What can you expect to do?
LEADERSHIP RESPONSIBILITIES
- Responsible for ensuring the delivery of all manufacturing test solutions for new and sustaining programs for rack-scale AI/ML and GPGPU and hardware accelerator-based server and storage platforms.
- Accountable for all onsite customer delivery commissioning tests as an extension of the manufacturing test capability.
- Strong ability to organize teams and drive the solution for multiple, complex problems cross-functionally and within various areas of technical expertise (hardware, software, firmware, performance, interoperability, etc.)
- Charged with ensuring the right level of execution discipline and engineering rigor is applied to all technical program deliverables – must lead by example.
- Empowered to make key decisions with respect to quality and features that may impact customer experience.
- Capable of influencing individuals, teams and executives to the level necessary to support delivery of programs within schedule, scope and budget boundaries.
- Able to understand how technical decisions impact the broader business, factories and customers and use these insights to lead the broader organization to optimized outcomes.
- Must be extremely detailed oriented while at the same time able to communicate complex issues in simple, actionable terms at all levels within the organization.
- Must possess a strong balance of technical skills, experience-based judgment and business acumen in all execution and decision-making activities.
- Strong ability to develop, grow and maintain healthy interpersonal relationships with peers, team members, executive leadership, customers and external partners at all times.
- Provide thought leadership and direct engineering support to multiple manufacturing sites in the areas of product, component and supplier expertise.
- Exchange knowledge and information with other Jabil facilities to ensure best practices are both shared and implemented throughout the Jabil organization.
- Guide technical and operational teams towards the successful resolution of complex and/or systemic product, process and material issues through the application of rigorous analytical methods.
- Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines).
FUNCTIONAL RESPONSIBILITIES
- Primary technical interface for manufacturing rack test development efforts from concept through delivery.
- Own driving resolution of all issues regarding test solutions aligned with critical path.
- Reviewer and approver of technical risks, and contingency/mitigation plans.
- Can review and provide input to material plans, test plans, test reports, lessons learned.
- Owns preventative actions so gaps in E2E process or capability are addressed long-term.
- Accountable for managing manufacturing technical and quality excursions through indirect coordination and hands-on engineering analysis as it pertains to your test deliverables.
- Provide technical and product subject matter expertise to the factories and customers.
- Lead highly technical and innovative RFI/RFQ responses supporting new strategic and recurring business opportunities.
KNOWLEDGE REQUIREMENTS
- Strong technical program management skills. Able to lead and direct a broad cross-functional global team.
- Exceptional knowledge and experience regarding product development processes and tools.
- Experience and deep level of understanding of server, storage, networking and GPGPU and PCIe-based accelerator architectures.
- Working knowledge of OS, driver, firmware and hardware architecture, device interactions and ability to leverage expertise to determine root cause that lead to optimized solutions.
- Deep experience in process development and process improvement. Able to lead the development of complex processes spanning multiple functions and areas of expertise.
What is the experience needed to be successful in this role?
- BS degree in Electrical/Computer Engineering, Computer Science or related field is required; MS is preferred.
- 8+ years' experience in a software or hardware product development environment with enterprise server, storage or networking products is required.
- Excellent verbal and written communication skills.
- Prior experience directly or indirectly managing engineering and/or development teams.
- Experience managing remote, multi-national and geographically dispersed development teams.
- Domestic and/or international travel, up to 30%, may be required.
Benefits Package with Jabil
Along with growth, stability, and the opportunity to be challenged, Jabil offers a competitive benefits package that includes:
- Competitive Base Salary
- Annual Bonus
- Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options
- 401K Match
- Employee Stock Purchase Plan
- Paid Time Off
- Tuition Reimbursement
- Life, AD&D, and Disability Insurance
- Commuter Benefits
- Employee Assistance Program
- Pet Insurance
- Adoption Assistance
- Annual Merit Increases
- Community Volunteer Opportunities
The Sr Manufacturing Engineer at Jabil, Inc. will play a pivotal role in optimizing manufacturing processes, driving continuous improvement, and leading technical projects to ensure efficient production and high-quality output.
This position requires a strong technical background and leadership skills to guide and mentor a team of engineers.
What will you do?
Process Optimization & Development:
~ Design, develop, and implement robust manufacturing processes for new and existing products, focusing on lean manufacturing principles, automation, and cost reduction.
Technical Leadership & Mentorship:
~ Provide technical guidance and leadership to a team of manufacturing engineers, fostering their professional development, and ensuring project execution aligns with company objectives.
Project Management:
~ Lead complex manufacturing engineering projects from conception through completion, including planning, resource allocation, budget management, and risk mitigation.
Continuous Improvement:
~ Identify and implement opportunities for process improvement, yield enhancement, defect reduction, and waste elimination using methodologies such as Six Sigma and Kaizen.
Tooling & Equipment:
~ Evaluate, select, and procure new manufacturing equipment and tooling, ensuring compatibility with production needs and adherence to safety standards.
Documentation & Standardization:
~ Develop and maintain comprehensive manufacturing documentation, including work instructions, process flow diagrams, and control plans, to ensure process consistency and repeatability.
Problem Solving:
~ Conduct root cause analysis for manufacturing issues, implement corrective and preventive actions, and drive problem resolution across various production lines.
Collaboration:
~ Work cross-functionally with R&D, Quality, Supply Chain, and Production teams to ensure seamless product introduction and efficient manufacturing operations.
Safety & Compliance:
~ Ensure all manufacturing processes and equipment adhere to internal safety regulations and external industry standards.
How will you get here?
Proficiency in process development, optimization, and validation (e.g., FMEA, SPC, MSA).
Strong understanding of Lean Manufacturing and Six Sigma principles (certification preferred).
Experience with various manufacturing processes relevant to Jabil's product lines (assembly, tooling, and automation)
Proficient in CAD software (e.g., SolidWorks, AutoCAD) and simulation tools.
Experience with ERP/MES systems.
Leadership & Soft Skills:
Proven leadership and mentorship abilities, with experience guiding and developing engineering teams.
Excellent problem-solving and analytical skills.
Effective communication (written and verbal) and interpersonal skills, with the ability to effectively collaborate with diverse teams.
Demonstrated project management experience, including planning, execution, and monitoring.
Ability to work independently and manage multiple priorities in a challenging environment.
Education:
Bachelor’s degree in manufacturing engineering, Mechanical Engineering, Industrial Engineering, or a related technical field
Master's degree preferred.
Experience:
~7+ years of progressive experience in manufacturing engineering roles, with at least 2 years in a leadership or senior technical capacity.
What Can Jabil Offer You?
Along with growth, stability, and the opportunity to be challenged, Jabil offers a competitive benefits package that includes:
~ Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options
~401K Match
~ Employee Stock Purchase Plan
~ Paid Time Off
~ Tuition Reimbursement
~ Life, AD&D, and Disability Insurance
~ Commuter Benefits
~ Employee Assistance Program
~ Pet Insurance
~ Adoption Assistance
~ Annual Merit Increases
~ Community Volunteer Opportunities
How will you make an impact?
This onsite opportunity is a CNC Programmer role, where the individual will be responsible for developing and maintaining CNC machining processes.
Location/Division Specific Information: Elmira, NY – Engineering Technician II – CNC Programmer. Jabil Elmira is a manufacturing and assembly facility where employees build, test, inspect, and support the production of various products. It includes engineering, quality, materials, and production operations typical of a Jabil manufacturing site.
What will you do?
Provides technical support for existing processes, including hands-on troubleshooting and failure analysis for milling machines, lathes, EDMs and other CNC equipment.
Performs programing, qualification, implementation and debugging of CNC programming and functional framework for new and updated machining processes.
Performs measurement of parts using manual gaging and automated methods.
Uses data driven decision making for CNC program corrections and improvements.
Participates in creation of machine requirements for modifications and new builds.
Participates in machine selection, vendor functional acceptance, site acceptance activities, installation and qualification activities.
Participates in cutting tool selection, custom cutting tool design, sourcing and testing.
Participates in tool holder selection, fixture selection, fixture design, sourcing and testing.
Performs installation, alignment and qualification of machine components including 4th and 5th axis rotary tables, integrated tool setters, touch probes and live tool spindles.
Participates in training of Machine Operators on equipment maintenance, tool change, tool setting, tool offsets, data transfers and other routine operational requirements.
Provides input on creative ways to reduce costs by streamlining processes and systems.
Acts as a role model for Machine Operators in terms of attitude, machine asset care, troubleshooting, adherence to processes and decision making.
May perform other duties and responsibilities as assigned.
How will you get here?
Education and Experience
Associate’s degree preferred; or minimum of two years related experience and/or training
High School Diploma or GED preferred not required or equivalent experience
Minimum of 2 years of CNC programming experience.
Knowledge, Skills, Abilities
- Experience with troubleshooting machine mechanical systems required.
- Experience with technical drawings, geometric dimensioning and tolerancing required.
- Understanding of calculations related to metal cutting (speeds, feeds, rpm, etc.).
- Experience with CNC equipment and related programming software is required. General CNC-ISO programming required (G codes/M codes) – Fanuc and/or Siemens desired
- Working knowledge CAD/CAM software required. Experience with Mastercam and CAD/CAM post processing desire
- Strong computer skills including Microsoft Office, specifically Word and Excel.
- Ability to prioritize work-schedules and coordinate multiple tasks.
Additional Job Requirements
Supports and operates in a proactive, safe, climate-controlled environment
Mix of sitting and standing with up to 7 hours per day standing.
Requires lifting and maneuvering fixtures, material and other equipment up to 50 pounds.
Willing to adjust schedule to support 2nd, 3rd and weekend operations on occasion as needed.
Standard working hours apply with potential for overtime as needed.
Readiness to work in conditions that may be warm, cool and/or noisy along with exposure to oil, coolants and other manufacturing related chemicals.
How will you make an impact?
This onsite opportunity is a CNC Programmer role, where the individual will be responsible for developing and maintaining CNC machining processes.
Location/Division Specific Information: Elmira, NY – Engineering Technician II – CNC Programmer. Jabil Elmira is a manufacturing and assembly facility where employees build, test, inspect, and support the production of various products. It includes engineering, quality, materials, and production operations typical of a Jabil manufacturing site.
What will you do?
Provides technical support for existing processes, including hands-on troubleshooting and failure analysis for milling machines, lathes, EDMs and other CNC equipment.
Performs programing, qualification, implementation and debugging of CNC programming and functional framework for new and updated machining processes.
Performs measurement of parts using manual gaging and automated methods.
Uses data driven decision making for CNC program corrections and improvements.
Participates in creation of machine requirements for modifications and new builds.
Participates in machine selection, vendor functional acceptance, site acceptance activities, installation and qualification activities.
Participates in cutting tool selection, custom cutting tool design, sourcing and testing.
Participates in tool holder selection, fixture selection, fixture design, sourcing and testing.
Performs installation, alignment and qualification of machine components including 4th and 5th axis rotary tables, integrated tool setters, touch probes and live tool spindles.
Participates in training of Machine Operators on equipment maintenance, tool change, tool setting, tool offsets, data transfers and other routine operational requirements.
Provides input on creative ways to reduce costs by streamlining processes and systems.
Acts as a role model for Machine Operators in terms of attitude, machine asset care, troubleshooting, adherence to processes and decision making.
May perform other duties and responsibilities as assigned.
How will you get here?
Education and Experience
Associate’s degree preferred; or minimum of two years related experience and/or training
High School Diploma or GED preferred not required or equivalent experience
Minimum of 2 years of CNC programming experience.
Knowledge, Skills, Abilities
- Experience with troubleshooting machine mechanical systems required.
- Experience with technical drawings, geometric dimensioning and tolerancing required.
- Understanding of calculations related to metal cutting (speeds, feeds, rpm, etc.).
- Experience with CNC equipment and related programming software is required. General CNC-ISO programming required (G codes/M codes) – Fanuc and/or Siemens desired
- Working knowledge CAD/CAM software required. Experience with Mastercam and CAD/CAM post processing desire
- Strong computer skills including Microsoft Office, specifically Word and Excel.
- Ability to prioritize work-schedules and coordinate multiple tasks.
Additional Job Requirements
Supports and operates in a proactive, safe, climate-controlled environment
Mix of sitting and standing with up to 7 hours per day standing.
Requires lifting and maneuvering fixtures, material and other equipment up to 50 pounds.
Willing to adjust schedule to support 2nd, 3rd and weekend operations on occasion as needed.
Standard working hours apply with potential for overtime as needed.
Readiness to work in conditions that may be warm, cool and/or noisy along with exposure to oil, coolants and other manufacturing related chemicals.
Lead development and documentation of complex electronic and electrical system requirements.
Translate requirements into system architecture, hardware/software designs, and interface specifications.
Lead testing and validation efforts to ensure system designs meet operational and functional requirements.
Oversee supplier performance monitoring to ensure system integration and compliance.
Lead troubleshooting during Installation and Check-Out and Production Acceptance Testing.
Review supplier drawing changes impacting production and update obsolete parts or design improvements.
Manage critical supplier performance and maintain Source Control Drawing requirements.
Collaborate with Supply Chain to formulate Requests for Information (RFI) for new equipment or long-lead items.
Support project management activities including work statements, budgets, schedules, and reviews.
Define and conduct critical tests to validate sensor design performance.
This position requires an Active US Security Clearance for which the US Government requires US Citizenship. An interim and/or final U.Secret clearance is required.
For Expert Engineer: Minimum 9 years of experience in design, integration, and test of electrical systems.
For Consultant Engineer: Minimum 14 years of experience in design, integration, and test of electrical systems.
Bachelor’s, Master’s, or Doctorate degree in engineering, computer science, mathematics, physics, or chemistry from an accredited institution.
An interim and/or final U.Secret clearance is required.
Proficiency with electronics lab instrumentation such as multiscope, TDR, signal/network analyzers, oscilloscopes, MIL-STD-1553B test tools, Agilent Fieldfox RF Test Set, fiber optics, and Ethernet.
Experience with product configuration management.
Knowledge of high frequency RF, digital, power, and analog test systems.
Experience managing and leading engineering projects.
Physical ability to lift test/cable equipment up to 35 lbs and navigate stairs.
Flexibility to work varied hours or overtime to meet production and integration schedules.
Familiarity with UNIX/Linux command line.
Experience leading teams of Factory/Flightline/Lab Technicians in fault isolation and troubleshooting of electrical wire assemblies and military electronic LRUs.
Ability to read and interpret wiring diagrams for aircraft connectors and wire bundles.
Relocation:
Relocation assistance is available for this position.
Boeing is a Drug Free Workplace where post-offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria are met as outlined in our policies.
Shift:
This position is for 1st shift.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
Applications for this position will be accepted until Mar. Citizen, U.National, lawful permanent resident, refugee, or asylee.
Bachelor's Degree or Equivalent Required
Relocation
Relocation assistance is not a negotiable benefit for this position.
Security Clearance
Secret Security Clearance (U.Security Clearance that has been active in the past 24 months is considered active)
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for 1st shift
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Lead development and documentation of complex electronic and electrical system requirements.
Translate requirements into system architecture, hardware/software designs, and interface specifications.
Lead testing and validation efforts to ensure system designs meet operational and functional requirements.
Oversee supplier performance monitoring to ensure system integration and compliance.
Lead troubleshooting during Installation and Check-Out and Production Acceptance Testing.
Review supplier drawing changes impacting production and update obsolete parts or design improvements.
Manage critical supplier performance and maintain Source Control Drawing requirements.
Collaborate with Supply Chain to formulate Requests for Information (RFI) for new equipment or long-lead items.
Support project management activities including work statements, budgets, schedules, and reviews.
Define and conduct critical tests to validate sensor design performance.
This position requires an Active US Security Clearance for which the US Government requires US Citizenship. An interim and/or final U.Secret clearance is required.
For Expert Engineer: Minimum 9 years of experience in design, integration, and test of electrical systems.
For Consultant Engineer: Minimum 14 years of experience in design, integration, and test of electrical systems.
Bachelor’s, Master’s, or Doctorate degree in engineering, computer science, mathematics, physics, or chemistry from an accredited institution.
An interim and/or final U.Secret clearance is required.
Proficiency with electronics lab instrumentation such as multiscope, TDR, signal/network analyzers, oscilloscopes, MIL-STD-1553B test tools, Agilent Fieldfox RF Test Set, fiber optics, and Ethernet.
Experience with product configuration management.
Knowledge of high frequency RF, digital, power, and analog test systems.
Experience managing and leading engineering projects.
Physical ability to lift test/cable equipment up to 35 lbs and navigate stairs.
Flexibility to work varied hours or overtime to meet production and integration schedules.
Familiarity with UNIX/Linux command line.
Experience leading teams of Factory/Flightline/Lab Technicians in fault isolation and troubleshooting of electrical wire assemblies and military electronic LRUs.
Ability to read and interpret wiring diagrams for aircraft connectors and wire bundles.
Relocation:
Relocation assistance is available for this position.
Boeing is a Drug Free Workplace where post-offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria are met as outlined in our policies.
Shift:
This position is for 1st shift.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
Applications for this position will be accepted until Mar. Citizen, U.National, lawful permanent resident, refugee, or asylee.
Bachelor's Degree or Equivalent Required
Relocation
Relocation assistance is not a negotiable benefit for this position.
Security Clearance
Secret Security Clearance (U.Security Clearance that has been active in the past 24 months is considered active)
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for 1st shift
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
The Industrial Engineer Intern continually improves processes, tools and layouts to ensure efficient production The primary focus of this internship will focus on the re-layout and organization of the production facility.
Essential Duties and Responsibilities: Engineering Initiates, champions, leads and implements process improvement projects Prepares layouts of plant facilities to optimize utilization and product flow.
Implements lean principles and methods in production, including 5S.
Recommends workspace layout changes and improvements to maximize efficient production.
Organizes/prioritizes resources and leads cross-functional teams to execute equipment, facility development and production line improvement projects Communicates project scopes, progress and closeouts to key stakeholders to create awareness and generate support Collaborates with engineering and operations to support potential improvement opportunities focused on improving product quality, efficient production and safe work environment Acts as a catalyst for continuously improving the Grand Rapids facility into world class conditions Job Requirements Currently enrolled in a Bachelor's degree program with a focus on Industrial Engineering Proficiency w/ tools such as 5S and Value Stream Mapping Strong mechanical aptitude and problem solving skills Experience with Lean Manufacturing and/or Six Sigma, strongly preferred Excellent MS Office skills, particularly Excel.
AutoCAD or similar CAD software experience Strong project management skills Excellent written and verbal communication skills About our Company Amphenol Borisch Technologies (ABT), a division of Amphenol Corporation, is an industry leader in providing high-reliability electronic systems for Aerospace and Defense companies across the globe.
ABT is focused on expanding the company’s industry presence by providing customers with superior quality and service combined with advanced manufacturing capabilities.
ABT is headquartered in Grand Rapids, MI and has locations in Nogales, Mexico, Mesa, AZ and London, Ontario.
Benefits We Offer: At Amphenol Borisch Technologies, we provide a wide range of benefits for our permanent full-time employees.
Highlights include: UNITED STATES Unique full-time work schedule that includes every other Friday off Full Medical, Dental and Prescription Drug Insurance Flexible Spending Accounts Generous 401(k) match Company-paid and Voluntary Life Insurance plans Paid Holidays and Paid Time Off Days Reimbursement Programs (Gym, Tuition, etc.) Paid time off to volunteer Company-Paid Short Term Disability CANADA Full benefits package Company-paid and Voluntary Life Insurance plans Paid Holidays and Paid Time Off Days Reimbursement Programs (Gym, Tuition, etc.) Pension plan Paid parental leave Amphenol Borisch Technologies is proud to be an Affirmative Action/Equal Employment Opportunity employer.
We consider applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, status as a protected veteran, or status as a qualified individual with disability.
At STRATA, we’re more than just a civil engineering and construction materials testing company—we’re a team that values growth, collaboration, and making a real impact through exciting and complex design projects across the Intermountain West.
We’re looking for an experienced Engineering Project Manager to join our team. We have a position open in the Coeur d'Alene, Idaho area and also in the Boise, Idaho area.
Provide project management of civil engineering projects that may include roadway materials, structure foundations, earthwork, site development, mining/mine sites, power transmission facilities, drainage, and other civil engineering projects.
As a Project Manager at STRATA, you’ll play a key role in winning and delivering projects. You'll have the opportunity to lead by example, mentoring and guiding team members throughout the project lifecycle.
Key responsibilities include:
- Building client relationships and identifying new project opportunities.
- Developing scopes, budgets, and schedules.
- Preparing contracts and project execution plans.
- Managing project performance, from kickoff to closeout.
- Collaborating with engineers, geologists, technicians, and accounting staff.
- Ensuring financial tracking and reporting are accurate and timely.
- Helping shape and improve internal processes and best practices.
- Supporting engineering proposals and business development efforts.
About Pinterest:
Millions of people around the world come to our platform to find creative ideas, dream about new possibilities and plan for memories that will last a lifetime. At Pinterest, we're on a mission to bring everyone the inspiration to create a life they love, and that starts with the people behind the product.
Discover a career where you ignite innovation for millions, transform passion into growth opportunities, celebrate each other's unique experiences and embrace theflexibility to do your best work. Creating a career you love? It's Possible.
At Pinterest, AI isn't just a feature, it's a powerful partner that augments our creativity and amplifies our impact, and we're looking for candidates who are excited to be a part of that. To get a complete picture of your experience and abilities, we'll explore your foundational skills and how you collaborate with AI.
Through our interview process, what matters most is that you can always explain your approach, showing us not just what you know, but how you think. You can read more about our AI interview philosophy and how we use AI in our recruiting process here.
Pinterest helps Pinners discover and do what they love. Core Engineering touches every surface the Pinner sees across the app and forms the front-and-center of the Pinterest experience for 500M+ Pinners every month. The Core team's mission is to recommend inspiring & engaging pins for all our Pinners. We are looking for a Machine Learning Engineer Engineering Manager II who can drive the team's technical direction, strategic planning and execution. You'll have the opportunity to lead a team that works cross-team on various innovative projects of new product experiences, builds large-scale low-latency systems and state-of-the-art machine learning models, and delivers great impact to our pinners and business metrics.
What you'll do:
- Be responsible for major areas of search, recommendations, notifications, etc for more than 500 million monthly active Pinterest users. Potential areas of impact include ML based retrieval, multi domain ranking, L1 modeling, candidate generators, sequence modeling, relevance modeling, and infrastructure efficiency and scalability.
- Deeply understand the Pinterest product and drive the vision for the team, ensuring the team's work directly contributes to the company's goals.
- Manage and mentor a team of Machine Learning engineers (L13 - L16), providing technical guidance and support to help them grow their careers. Identify team needs and hire strong candidates.
- Collaborate closely with other engineering teams at Pinterest to enhance the experience for users, including Advanced Technology Group, Infrastructure, Content Understanding and User Understanding.
- Provide visibility to senior leadership regarding the team's global impact.
- Partner with stakeholders across the company, including product management, data scientists, and design, to shape the future of the content ecosystem and personalization at Pinterest.
- Build a culture of excellence and expertise within the team.
What we're looking for:
- MS/PhD in Computer Science, ML, NLP, Statistics, Information Sciences, related field, or equivalent experience.
- Experience leading and working on a large-scale production recommendation, e-commerce, search or ads systems that are based on state-of-the-art machine learning and big data technology.
- Strong experience in related fields such as recommendation systems and applied machine learning experience is required. Natural language processing and computer vision is a bonus.
- Demonstrated ability to define and drive the strategic roadmap for scalable, production-quality systems from concept to execution.
- Strong focus on product impact and user experience within a consumer-focused environment.
- Minimum of 1 year of experience managing a high-performing machine learning engineering team of 10+ members.
- 8+ years of experience in software development, with a proven track record of delivering impactful solutions.
Relocation Statement:
- This position is not eligible for relocation assistance. Visit our PinFlex page to learn more about our working model.
In-Office Requirement Statement:
- We let the type of work you do guide the collaboration style. That means we're not always working in an office, but we continue to gather for key moments of collaboration and connection.
- This role will need to be in the office for in-person collaboration 1-2 times/quarter and therefore can be situated anywhere in the country.
#LI-REMOTE
#LI-DM57
At Pinterest we believe the workplace should be equitable, inclusive, and inspiring for every employee. In an effort to provide greater transparency, we are sharing the base salary range for this position. The position is also eligible for equity. Final salary is based on a number of factors including location, travel, relevant prior experience, or particular skills and expertise.
Information regarding the culture at Pinterest and benefits available for this position can be found here.
US based applicants only$189,308—$389,753 USDOur Commitment to Inclusion:
Pinterest is an equal opportunity employer and makes employment decisions on the basis of merit. We want to have the best qualified people in every job. All qualified applicants will receive consideration for employment without regard to race, color, ancestry, national origin, religion or religious creed, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender, gender identity, gender expression, age, marital status, status as a protected veteran, physical or mental disability, medical condition, genetic information or characteristics (or those of a family member) or any other consideration made unlawful by applicable federal, state or local laws. We also consider qualified applicants regardless of criminal histories, consistent with legal requirements. If you require a medical or religious accommodation during the job application process, please completethis formfor support.
Build a Career That Matters with One of the World's Most Respected Employers!
- - - - - - - - - - - -
Michelin Louisville is seeking Engineering Co-Op students majoring in Chemical, Mechanical, Industrial, Computer, and Electrical Engineering to join the team at our plant in Louisville, KY.
In our petrochemical facility we produce synthetic rubber from monomer feedstocks and catalysts, through a polymerization reaction.
The product, after other operations, is carefully weighed and pressed into uniform bales before shipping to the next Michelin factory for tire production.
Our facility supplies various rubber products that go into tires in the USA, Canada, and in Michelin factories around the world. Our site is one of the three Michelin petrochemical sites producing synthetic rubber for cars, vans, trucks, two-wheelers, aircraft, agricultural tractors, and mining equipment.
WHAT WILL YOU DO
- Work on a project team to analyze data to improve performance and/or production
- Ensure products meet the defined quality and performance standards
- Assist with productivity, cost-reduction, and continuous-improvement projects
- Study processes and propose improvements
WHAT WILL YOU BRING
The ability to interact in a professional manner with external partners, suppliers, customers, and colleagues. Success in working with other people or team to meet a common objective. Proficient in the use of Microsoft Office Suite (Word, Excel, PowerPoint) and ability to learn other software systems. Minimum cumulative GPA of 3.0 Currently enrolled in a Mechanical, Chemical, Industrial, Computer, or Electrical Engineering or equivalent program at an accredited four-year college or university.
Ready to Shape the Future of Innovation?
Michelin is building a world-leading manufacturer of life-changing composites and experiences. Pioneering engineered materials for more than 130 years, Michelin is uniquely positioned to make decisive contributions to human progress and a more sustainable world. Drawing on its deep know-how in polymer composite materials, Michelin is constantly innovating to manufacture high-quality tires and components for critical applications in demanding fields as varied as mobility, construction, aeronautics, low-carbon energies and healthcare.
The care placed in its products and deep customer knowledge inspire Michelin to offer the finest experiences. This spans from providing data- and AI-based connected solutions for professional fleets to recommending outstanding restaurants and hotels curated by the MICHELIN Guide.
Why Michelin?
- Career Growth: Personalized development plans, mentorship, and cross-functional opportunities. Unique career paths and opportunities for advancement.
- Inclusive Culture: Thrive in a diverse, supportive environment where your competencies, contributions and behaviors are recognized. Option to join one of our Business Resource Groups and Inclusion Councils.
- Innovation-Driven: Work on projects that matter-from sustainable materials to digital transformation.
- Community Impact: Be part of a company that does what's right. We use sustainable business practices while balancing the needs of our customers and communities.
Michelin provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or other non-merit-based factors. Consistent with these obligations, Michelin also provides reasonable accommodations to employees and applicants with disabilities and for sincerely held religious beliefs. If you need accommodation for any part of the employment process because of a disability, please contact us at .
This position is not available for immigration sponsorship.
We build the future with people like you. Begin your career with Michelin today!
Job Summary
The SMT Engineering Tech will be responsible for supporting the surface mount technology (SMT) production lines, ensuring efficient operation, high-quality output, and continuous improvement through troubleshooting, maintenance, and process optimization.
Job Responsibilities
- Perform set-up, operation, and troubleshooting of SMT equipment including pick-and-place machines, reflow ovens, screen printers, and automated optical inspection (AOI) systems.
- Monitor SMT production processes to identify and resolve issues related to component placement, solder paste application, and reflow profiles.
- Conduct preventative maintenance and calibration on SMT machinery to ensure optimal performance and minimize downtime.
- Assist engineers in the development and implementation of new SMT processes, equipment, and materials.
- Interpret and analyze SMT process data to identify trends, root causes of defects, and areas for improvement.
- Provide technical support to production operators, offering guidance on best practices and troubleshooting techniques.
- Participate in continuous improvement initiatives, including lean manufacturing and Six Sigma methodologies, to enhance SMT line efficiency and product quality.
- Maintain accurate records of equipment maintenance, process parameters, and production issues.
- Adhere to all safety protocols and quality standards within the SMT department.
Job Qualifications
- Associate's degree in Electrical Engineering Technology, Electronics, or a related field; or equivalent practical experience.
- Minimum of 2-4 years of experience working with SMT production lines and equipment.
- Strong understanding of SMT processes, including solder paste deposition, component placement, reflow soldering, and AOI.
- Proficiency in operating and troubleshooting various SMT equipment (e.g., Fuji, MyData, Universal, MPM, DEK, Koh Young, Mirtec).
- Ability to read and interpret technical drawings, schematics, and process specifications.
- Excellent problem-solving skills and a methodical approach to troubleshooting.
- Strong communication and interpersonal skills to effectively collaborate with engineers and production teams.
- Ability to work independently and as part of a team in a fast-paced manufacturing environment.
- Familiarity with IPC standards (e.g., IPC-A-610) is a plus.
Location: Florence, KY (CVG 100)
Shift: Wednesday/Thursday- Saturday, 6am-6pm. Person will be trained on First shift; Monday to Friday 6:00 am to 3:00 pm and later will need to work Wednesday/Thursday- Saturday, 6am-6pm (403/C)
JOB SUMMARY
Industrial Eng Technician I will support the Industrial Engineering Department in planning, designing, implementing, and managing; integrated, production and service delivery systems that assure performance, reliability, maintainability, schedule adherence and cost control within the production site.Main focus will be assisting the IE in layout and process changes in production and entering data in IE related systems. ESSENTIAL DUTIES AND RESPONSIBILITIES
· Assist in the preparation of an area for a line move or process change
· Update the Product-Process-Time database (IEDB), as directed by the Industrial Engineer
· Update/Create production Visuals, as directed by the Industrial Engineer
· Order, receive and validate tooling, as directed by the Industrial Engineer
· Insure the standardization of Jabil processes throughout the site in accordance with the global, regional and site direction
· Support the Lean organization by maintaining a solid process foundation and data integrity in order to support process improvement through the organization
· Comply and follow all procedures within the company security policy.
· May perform other duties and responsibilities as assigned
JOB QUALIFICATIONS/KNOWLEDGE REQUIREMENTS
· Understanding and application of broad range of industrial engineering tools (ie. Work measurement, process mapping, facilities and workstation design, etc.)
· A minimum of 1-2 years of manufacturing engineering/Industrial Engineering or equivalent technical roles experience
· Eye for detail when updating systems
· Basic analytical ability
· Basic communication skills
· Proficiency in use of personal computers, Microsoft Office products, Microsoft Visio, Microsoft Project, and AutoCAD skills required.
Location: Florence, KY (CVG 100)
Shift: Wed./Thurs.- Sat.- 6pm - 6am (404/D). Need to get trained on Monday to Friday 3:00 pm to 12:00 midnight shift and later work in 404 shift from Wednesday/Thursday- Saturday 6:00 pm to 6:00 am
JOB SUMMARYIndustrial Eng Technician I will support the Industrial Engineering Department in planning, designing, implementing, and managing; integrated, production and service delivery systems that assure performance, reliability, maintainability, schedule adherence and cost control within the production site.Main focus will be assisting the IE in layout and process changes in production and entering data in IE related systems.ESSENTIAL DUTIES AND RESPONSIBILITIES
· Assist in the preparation of an area for a line move or process change· Update the Product-Process-Time database (IEDB), as directed by the Industrial Engineer· Update/Create production Visuals, as directed by the Industrial Engineer· Order, receive and validate tooling, as directed by the Industrial Engineer· Insure the standardization of Jabil processes throughout the site in accordance with the global, regional and site direction· Support the Lean organization by maintaining a solid process foundation and data integrity in order to support process improvement through the organization· Comply and follow all procedures within the company security policy.· May perform other duties and responsibilities as assigned
JOB QUALIFICATIONS/KNOWLEDGE REQUIREMENTSKey Requirements:
· Understanding and application of broad range of industrial engineering tools (ie. Work measurement, process mapping, facilities and workstation design, etc.)
· A minimum of 1-2 years of manufacturing engineering/Industrial Engineering or equivalent technical roles experience· Eye for detail when updating systems· Basic analytical ability· Basic communication skills· Proficiency in use of personal computers, Microsoft Office products, Microsoft Visio, Microsoft Project, and AutoCAD skills required.
Shift: Wednesday/Thursday- Saturday, 6am-6pm. Person will be trained on First shift; Monday to Friday 6:00 am to 3:00 pm and later will need to work Wednesday/Thursday- Saturday, 6am-6pm (403/C)
JOB SUMMARY
Industrial Eng Technician I will support the Industrial Engineering Department in planning, designing, implementing, and managing; integrated, production and service delivery systems that assure performance, reliability, maintainability, schedule adherence and cost control within the production site.
Main focus will be assisting the IE in layout and process changes in production and entering data in IE related systems.
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Assist in the preparation of an area for a line move or process change
· Update the Product-Process-Time database (IEDB), as directed by the Industrial Engineer
· Update/Create production Visuals, as directed by the Industrial Engineer
· Order, receive and validate tooling, as directed by the Industrial Engineer
· Insure the standardization of Jabil processes throughout the site in accordance with the global, regional and site direction
· Support the Lean organization by maintaining a solid process foundation and data integrity in order to support process improvement through the organization
· Comply and follow all procedures within the company security policy.
· May perform other duties and responsibilities as assigned
JOB QUALIFICATIONS/KNOWLEDGE REQUIREMENTS
Key Requirements:
· Understanding and application of broad range of industrial engineering tools (ie. Work measurement, process mapping, facilities and workstation design, etc.)
· A minimum of 1-2 years of manufacturing engineering/Industrial Engineering or equivalent technical roles experience
· Eye for detail when updating systems
· Basic analytical ability
· Basic communication skills
· Proficiency in use of personal computers, Microsoft Office products, Microsoft Visio, Microsoft Project, and AutoCAD skills required.
Shift: Wed./Thurs.- Sat.- 6pm - 6am (404/D). Need to get trained on Monday to Friday 3:00 pm to 12:00 midnight shift and later work in 404 shift from Wednesday/Thursday- Saturday 6:00 pm to 6:00 am
JOB SUMMARY
Industrial Eng Technician I will support the Industrial Engineering Department in planning, designing, implementing, and managing; integrated, production and service delivery systems that assure performance, reliability, maintainability, schedule adherence and cost control within the production site.
Main focus will be assisting the IE in layout and process changes in production and entering data in IE related systems.
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Assist in the preparation of an area for a line move or process change
· Update the Product-Process-Time database (IEDB), as directed by the Industrial Engineer
· Update/Create production Visuals, as directed by the Industrial Engineer
· Order, receive and validate tooling, as directed by the Industrial Engineer
· Insure the standardization of Jabil processes throughout the site in accordance with the global, regional and site direction
· Support the Lean organization by maintaining a solid process foundation and data integrity in order to support process improvement through the organization
· Comply and follow all procedures within the company security policy.
· May perform other duties and responsibilities as assigned
JOB QUALIFICATIONS/KNOWLEDGE REQUIREMENTS
Key Requirements:
· Understanding and application of broad range of industrial engineering tools (ie. Work measurement, process mapping, facilities and workstation design, etc.)
· A minimum of 1-2 years of manufacturing engineering/Industrial Engineering or equivalent technical roles experience
· Eye for detail when updating systems
· Basic analytical ability
· Basic communication skills
· Proficiency in use of personal computers, Microsoft Office products, Microsoft Visio, Microsoft Project, and AutoCAD skills required.
Shift: Wed./Thurs.- Sat.- 6pm - 6am (404/D). Need to get trained on Monday to Friday 3:00 pm to 12:00 midnight shift and later work in 404 shift from Wednesday/Thursday- Saturday 6:00 pm to 6:00 am
JOB SUMMARY
Industrial Eng Technician I will support the Industrial Engineering Department in planning, designing, implementing, and managing; integrated, production and service delivery systems that assure performance, reliability, maintainability, schedule adherence and cost control within the production site.
Main focus will be assisting the IE in layout and process changes in production and entering data in IE related systems.
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Assist in the preparation of an area for a line move or process change
· Update the Product-Process-Time database (IEDB), as directed by the Industrial Engineer
· Update/Create production Visuals, as directed by the Industrial Engineer
· Order, receive and validate tooling, as directed by the Industrial Engineer
· Insure the standardization of Jabil processes throughout the site in accordance with the global, regional and site direction
· Support the Lean organization by maintaining a solid process foundation and data integrity in order to support process improvement through the organization
· Comply and follow all procedures within the company security policy.
· May perform other duties and responsibilities as assigned
JOB QUALIFICATIONS/KNOWLEDGE REQUIREMENTS
Key Requirements:
· Understanding and application of broad range of industrial engineering tools (ie. Work measurement, process mapping, facilities and workstation design, etc.)
· A minimum of 1-2 years of manufacturing engineering/Industrial Engineering or equivalent technical roles experience
· Eye for detail when updating systems
· Basic analytical ability
· Basic communication skills
· Proficiency in use of personal computers, Microsoft Office products, Microsoft Visio, Microsoft Project, and AutoCAD skills required.
Job Summary
- Perform set-up, operation, and troubleshooting of SMT equipment including pick-and-place machines, reflow ovens, screen printers, and automated optical inspection (AOI) systems.
- Monitor SMT production processes to identify and resolve issues related to component placement, solder paste application, and reflow profiles.
- Conduct preventative maintenance and calibration on SMT machinery to ensure optimal performance and minimize downtime.
- Assist engineers in the development and implementation of new SMT processes, equipment, and materials.
- Interpret and analyze SMT process data to identify trends, root causes of defects, and areas for improvement.
- Provide technical support to production operators, offering guidance on best practices and troubleshooting techniques.
- Participate in continuous improvement initiatives, including lean manufacturing and Six Sigma methodologies, to enhance SMT line efficiency and product quality.
- Maintain accurate records of equipment maintenance, process parameters, and production issues.
- Adhere to all safety protocols and quality standards within the SMT department.
Job Qualifications
- Associate's degree in Electrical Engineering Technology, Electronics, or a related field; or equivalent practical experience.
- Minimum of 2-4 years of experience working with SMT production lines and equipment.
- Strong understanding of SMT processes, including solder paste deposition, component placement, reflow soldering, and AOI.
- Proficiency in operating and troubleshooting various SMT equipment (e.g., Fuji, MyData, Universal, MPM, DEK, Koh Young, Mirtec).
- Ability to read and interpret technical drawings, schematics, and process specifications.
- Excellent problem-solving skills and a methodical approach to troubleshooting.
- Strong communication and interpersonal skills to effectively collaborate with engineers and production teams.
- Ability to work independently and as part of a team in a fast-paced manufacturing environment.
- Familiarity with IPC standards (e.g., IPC-A-610) is a plus.
Job Summary
- Perform set-up, operation, and troubleshooting of SMT equipment including pick-and-place machines, reflow ovens, screen printers, and automated optical inspection (AOI) systems.
- Monitor SMT production processes to identify and resolve issues related to component placement, solder paste application, and reflow profiles.
- Conduct preventative maintenance and calibration on SMT machinery to ensure optimal performance and minimize downtime.
- Assist engineers in the development and implementation of new SMT processes, equipment, and materials.
- Interpret and analyze SMT process data to identify trends, root causes of defects, and areas for improvement.
- Provide technical support to production operators, offering guidance on best practices and troubleshooting techniques.
- Participate in continuous improvement initiatives, including lean manufacturing and Six Sigma methodologies, to enhance SMT line efficiency and product quality.
- Maintain accurate records of equipment maintenance, process parameters, and production issues.
- Adhere to all safety protocols and quality standards within the SMT department.
Job Qualifications
- Associate's degree in Electrical Engineering Technology, Electronics, or a related field; or equivalent practical experience.
- Minimum of 2-4 years of experience working with SMT production lines and equipment.
- Strong understanding of SMT processes, including solder paste deposition, component placement, reflow soldering, and AOI.
- Proficiency in operating and troubleshooting various SMT equipment (e.g., Fuji, MyData, Universal, MPM, DEK, Koh Young, Mirtec).
- Ability to read and interpret technical drawings, schematics, and process specifications.
- Excellent problem-solving skills and a methodical approach to troubleshooting.
- Strong communication and interpersonal skills to effectively collaborate with engineers and production teams.
- Ability to work independently and as part of a team in a fast-paced manufacturing environment.
- Familiarity with IPC standards (e.g., IPC-A-610) is a plus.
