Engineering Paper Jobs in Franklin, MI

Job Title– Electrical Engineer (DRE)

Location: Novi, Michigan, USA

Job-Type: Full-Time

Job Summary

The Electrical Distribution System (EDS) Components Design Responsible Engineer (DRE) is responsible for the design, development, validation, and release of electrical distribution system components for Scout Motors’ all-electric pickup trucks and SUVs. The role involves managing component design from concept through production launch, collaborating with internal teams and suppliers, and ensuring compliance with safety regulations and engineering standards.

Key Responsibilities

1. Component Design and Development

• Design and develop all EDS components including:
• Shields
• Troughs
• Grommets
• Connectors and terminals
• Power distribution components
• Manage the full product lifecycle from concept design (clean-sheet development) through virtual development, testing, validation, and manufacturing launch.

2. Technical Specification & Sourcing Support

• Collaborate with Purchasing and Finance teams to develop detailed technical specifications.
• Support the quotation and sourcing process for EDS components.
• Work closely with suppliers to ensure components meet cost, timing, and quality targets.

3. Standards and Component Library Development

• Develop and maintain a standardized library of core EDS components aligned with global Volkswagen Group standards.
• Ensure components can be effectively integrated into vehicle wiring harness and power distribution systems.

4. Cross-Functional Collaboration

• Partner with VW Group module owners, internal engineering teams, and external suppliers to define and release EDS components.
• Foster a collaborative, high-performance engineering culture within the team.

5. Verification and Validation

• Conduct virtual simulations and physical testing for component verification.
• Participate in field testing and product validation activities to confirm performance and reliability.

6. Compliance and Safety

• Ensure all designs meet automotive safety standards and U.S. government regulatory requirements.
• Apply Six Sigma methodologies to improve product quality and solve engineering problems.

7. Manufacturing and Production Support

• Contribute to the design and development of production facilities for Scout electric vehicles.
• Support the transition of components from development to mass production launch.

8. Continuous Improvement

• Monitor consumer experience and feedback to identify potential system improvements.
• Proactively recommend enhancements to EDS systems and components.

Required Qualifications

Education

• Bachelor’s or Master’s degree in:
• Electrical Engineering
• Mechanical Engineering
• Systems Engineering
• Or a related engineering field.

Experience

• Minimum 5+ years of experience in:
• Electrical wire harness design
• Power distribution components design and release
• Automotive product development processes including design, testing, and production launch.

Technical Skills

• Strong expertise in:
• Wire harness component design
• Power distribution systems
• Six Sigma problem-solving methodology
• Familiarity with Computer-Aided Engineering (CAE) tools or relevant simulation technologies.

Job Title– Electrical Engineer

Location: Novi, Michigan, USA

Job-Type: Full-Time

Job Summary

The Electrical Distribution System (EDS) Components Design Responsible Engineer (DRE) is responsible for the design, development, validation, and release of electrical distribution system components for Scout Motors’ all-electric pickup trucks and SUVs. The role involves managing component design from concept through production launch, collaborating with internal teams and suppliers, and ensuring compliance with safety regulations and engineering standards.

Key Responsibilities

1. Component Design and Development

• Design and develop all EDS components including:
• Shields
• Troughs
• Grommets
• Connectors and terminals
• Power distribution components
• Manage the full product lifecycle from concept design (clean-sheet development) through virtual development, testing, validation, and manufacturing launch.

2. Technical Specification & Sourcing Support

• Collaborate with Purchasing and Finance teams to develop detailed technical specifications.
• Support the quotation and sourcing process for EDS components.
• Work closely with suppliers to ensure components meet cost, timing, and quality targets.

3. Standards and Component Library Development

• Develop and maintain a standardized library of core EDS components aligned with global Volkswagen Group standards.
• Ensure components can be effectively integrated into vehicle wiring harness and power distribution systems.

4. Cross-Functional Collaboration

• Partner with VW Group module owners, internal engineering teams, and external suppliers to define and release EDS components.
• Foster a collaborative, high-performance engineering culture within the team.

5. Verification and Validation

• Conduct virtual simulations and physical testing for component verification.
• Participate in field testing and product validation activities to confirm performance and reliability.

6. Compliance and Safety

• Ensure all designs meet automotive safety standards and U.S. government regulatory requirements.
• Apply Six Sigma methodologies to improve product quality and solve engineering problems.

7. Manufacturing and Production Support

• Contribute to the design and development of production facilities for Scout electric vehicles.
• Support the transition of components from development to mass production launch.

8. Continuous Improvement

• Monitor consumer experience and feedback to identify potential system improvements.
• Proactively recommend enhancements to EDS systems and components.

Required Qualifications

Education

• Bachelor’s or Master’s degree in:
• Electrical Engineering
• Mechanical Engineering
• Systems Engineering
• Or a related engineering field.

Experience

• Minimum 5+ years of experience in:
• Electrical wire harness design
• Power distribution components design and release
• Automotive product development processes including design, testing, and production launch.

Technical Skills

• Strong expertise in:
• Wire harness component design
• Power distribution systems
• Six Sigma problem-solving methodology
• Familiarity with Computer-Aided Engineering (CAE) tools or relevant simulation technologies.

• Bachelor’s degree in mechanical engineering
• Thorough knowledge of engineering design & development concepts of automotive BIW system .
• Experience in side body panel, Roof, Floor panel and other BIW components
• Very good proficiency in CATIA V5/V6
• Bachelor’s degree in Mechanical, Engineering.
• 3+ years of proven experience designing high-volume designs of BIW parts
• Development of outer skin panels (A-Surface) in collaboration with OEM Design Studio, Design Engineering, CAE, etc.
• Development of inner panels, reinforcements, brackets and other structural panel
• Ability to create and completion of Sheet metal parts e.g. brackets, Panels, etc
• Design of automotive component parts in CATIA V5. Experience in creating 3D designs and 2D drawings (e.g. CATIA V5 only)
• Strong communication skills, both verbal and written, and capability to drive 10 people offshore team
• Actively engage with Automotive OEM design engineers to collaborate on design projects for trading off cost, mass, joining methods, formability, and performance.
• Interpret CAE simulation results and integrate recommendations into product design
• Strong working knowledge of Design for Manufacturing, including formability with GD&T and dimensional engineering.

Responsibilities

• Bachelor of Science in Mechanical Engineering with a minimum of 3 years of experience in automotive seating system and subsystem design and development
• Thorough knowledge of engineering design & development concepts of automotive Seating system
• Very good proficiency in CATIA V5/V6. Prepare and execute design release in the 3DExperience PLM system. Experience in creating 3D designs and 2D drawings (e.g. CATIA V5 only)
• Experience in design of Seat and seat components e.g. Cushion Frame, Back frame, Headrest, seat plastic and recliners and track
• Relevant experience in Master Sections, Vehicle Integration, Vehicle packaging, Concept creation, assembly processes of various Seat parts.
• Knowledge and understanding of Tooling and manufacturing processes
• Prepare and maintain engineering release and change documentation Lead design FMEA studies and GD&T
• Ability to perform Complete Seat packaging study of seating components
• Working knowledge of regulatory and certification requirements for seating system
• Maintain and develop Design Validation Plans (DVP), and Design Failure Mode Analysis (DFMEA)
• Good knowledge of seating system and component manufacturing processes
• Ability to define seating comfort and define comfort target
• Actively engage with Automotive OEM / Tier-I design engineers to collaborate on design projects for trading off cost, mass, joining methods, molding and testing performance.
• Propose and promote design improvement approaches including cost reduction and design optimization
• Complete and release Seating system, sub-system and detail designs
• Interpret CAE simulation results and integrate recommendations into product design

• Collaborate with seating suppliers and support overall vehicle development milestones and prototype/production build events

• Must have ability to perform feasibility studies, Check A-class surface and define craftsman ship target.

• Meet project deliverables commitments and timelines

• Design of automotive component parts in CATIA V5/V6

• Strong communication skills, both verbal and written, and capability to drive offshore team.

Job Title: EDS Component Design Engineer

Location: Novi, MI

Role Overview

We are seeking an experienced EDS Component Design Engineer to lead the design and development of electrical distribution system (EDS) components for next-generation electric pickup trucks and rugged SUVs. The role will involve full lifecycle responsibility from concept design through validation, testing, and manufacturing launch.

The ideal candidate will have strong expertise in wire harness components and power distribution systems, working closely with cross-functional teams including engineering, purchasing, finance, and suppliers to deliver high-quality automotive components.

Key Responsibilities

• Design and develop EDS components including shields, troughs, grommets, connectors, terminals, and power distribution components.
• Support development from concept (clean sheet design) through virtual validation, testing, sign-off, and manufacturing launch.
• Collaborate with purchasing and finance teams to create technical specifications for sourcing and supplier quoting.
• Develop and maintain a standard library of core EDS components aligned with global automotive standards.
• Work closely with VW Group module owners and suppliers to define and release wiring and power distribution components.
• Perform virtual and physical verification testing, including field testing.
• Ensure compliance with safety standards and U.S. regulatory requirements.
• Contribute to production facility design for electric trucks and SUVs.
• Manage supplier deliverables to meet cost, quality, and program timing targets.
• Identify opportunities to improve system performance and consumer experience.

Required Qualifications

• Bachelor’s or Master’s degree in Electrical Engineering, Mechanical Engineering, Systems Engineering, or related field.
• 5+ years of experience in automotive wire harness or power distribution component design.
• Strong expertise in EDS component design and release processes.
• Experience working across complete product development lifecycle (design, testing, launch).
• Knowledge of Six Sigma engineering methods for design and problem solving.
• Familiarity with CAE tools or computer-aided engineering environments.
• Strong collaboration skills with cross-functional teams and suppliers.

Preferred Skills

• Experience working in electric vehicle platforms or advanced automotive programs.
• Knowledge of automotive electrical architecture and power distribution systems.
• Ability to work in fast-paced product development environments.

Job Title: Hardware Technician

Location: Novi, MI

Job Type: Long-Term

Job Summary:

We are seeking a detail-oriented and hands-on Hardware Technician to support hardware test bench setup, maintenance, and integration activities. The ideal candidate will have strong experience in electronics hardware environments, with the ability to install, troubleshoot, and maintain test systems while collaborating closely with engineering teams.

Key Responsibilities

• Install, wire, and configure hardware test benches according to engineering specifications and safety standards
• Perform routine maintenance, troubleshooting, and repair of test bench components and equipment
• Assist engineering teams with hardware integration, diagnostics, and validation testing
• Support calibration and functional verification of electronic test systems
• Maintain inventory of tools, components, and lab equipment
• Document test configurations, procedures, maintenance activities, and issue resolutions
• Ensure compliance with lab safety protocols and maintain a clean, organized workspace
• Work independently and collaboratively within cross-functional teams

Required Qualifications

• Associate’s degree or technical certification in Electronics, Electrical Engineering Technology, or a related field
• Minimum 2 years of experience in hardware setup, lab support, or electronics test environment
• Hands-on experience with wiring, soldering, crimping, and cable assembly
• Proficiency in using diagnostic tools such as multimeters and oscilloscopes
• Strong troubleshooting and problem-solving skills
• High attention to detail and documentation accuracy
• Ability to work in a fast-paced engineering environment

About the Role

We are looking for a Power Electrical Engineer to join our engineering team. This individual will help design, size and specify power distribution from MV though LV. This person will be involved in concept investigation, system verification, design through successful installation.

Basic Qualifications & Responsibilities

• Proven expertise in the design, testing, troubleshooting, and maintenance of low- and medium-voltage AC distribution systems, including power distribution, control systems, and wiring.
• Collaborate with sales, engineering, and other technical teams to ensure cohesive project execution.
• Experience in the development of electrical construction packages comprised of:
• Single Line Diagrams
• Three Line Diagrams
• Schematics/Elementary Diagrams
• Interconnection Diagrams
• Written narratives
• Proficient in interpreting and applying electrical schematics, mechanical drawings, and technical diagrams to support system design and troubleshooting.
• Understanding of 3 Phase Power Systems, Power Factor correction, Harmonics mitigation.
• Interpret/Draft AC Distribution schematic drawings.
• Ability to load balance and perform load calculations.
• Knowledgeable of the requirements detailed in the National Electrical Code (NEC) and National Electrical Safety Code (NESC).
• Experience with power system modeling tools - ETAP preferred.
• Adept at the use of Microsoft Office Suite and AutoCAD. Knowing Revit is a plus.
• Communicate effectively with both the business and technical teams.
• Strong analytical and problem-solving skills to tackle complex engineering challenges.
• Familiar with Automotive standards and specification.
• Technical Support: Provide technical support and troubleshooting for Power Platform solutions, identifying, and resolving issues promptly.
• Documentation: Create and maintain detailed technical documentation for solutions, workflows, and processes, ensuring knowledge transfer and continuity.
• Familiarity with various cable types (e.g., multi-conductor, fiber optic, coaxial, twisted pair, power) and their specifications for system integration and performance.

Required Qualifications

• Bachelor’s degree in Electrical Engineering from an accredited institution and minimum of 7 years in power distribution applications.
• Legally authorized to work in the United States without company sponsorship now or in the future.
• Must possess and maintain a valid and unrestricted driver’s license and US Passport with no travel restrictions.

Required Skills

• Proven expertise in the design, testing, troubleshooting, and maintenance of low- and medium-voltage AC distribution systems.
• Collaborate with sales, engineering, and other technical teams.
• Proficient in interpreting and applying electrical schematics.
• Understanding of 3 Phase Power Systems.
• Ability to load balance and perform load calculations.
• Knowledge of NEC and NESC requirements.
• Experience with ETAP.
• Adept at Microsoft Office Suite and AutoCAD.
• Strong analytical and problem-solving skills.

Preferred Skills

• State of Michigan PE License.
• Master’s degree in EEGM automotive standards.

Start with a job, stay for a career.

For over 100 years, Edward Rose & Sons has been committed to career development for our team members. We offer you the opportunity to grow in an environment where you will feel valued, have room for advancement, and be rewarded for your good work.

We are currently looking for a professional and motivated individual to join our team as a HR Administrator in Bloomfield Hills, MI. The HR Administrator provides administrative, operational, and project coordination support to the People Team.

What are the responsibilities of a HR Administrator?

• Oversee unemployment claims for assigned portfolio. Reply to requests, attend hearings, submit protests, and track data and coordinate through the Portfolio HR Manager.
• Administrative partnership with CHRO to include recording meeting notes, coordinating People Leadership Team and All Team meetings, complete expense reports, schedule and track community visits, manage paper and electronic file administration, calendar management, and other responsibilities assigned.
• Oversee the organization and maintenance of both electronic and hard-copied team member files, in accordance with retention policies. Coordinate electronic file organization for share point documents.
• Support the HR Manager as a volunteer for annual Dream Cruise, Summer Company Hosted Food Truck, Annual Holiday event and Bloomfield Hills participation in the annual Toys for Tots campaign.
• Attend Health and Safety committee meetings for minutes as the Secretary.
• Any additional projects or assignments as directed by the CHRO.

What are the role requirements?

• Bachelor’s degree in Human Resources, Business Administration, or another related field is preferred.
• Ability to maintain confidential information.
• Previous experience in a human resources role is desired.
• Ability to be organized, detail-oriented, and to work effectively in a fast-paced environment.
• Ability to work cooperatively and respectfully with others.
• Must be proficient with Microsoft Office programs.
• Experience with using UKG or another HR information system is desired.
• Must possess exceptional organizational and time-management skills, including the ability to balance and prioritize simultaneous projects and tasks.
• Strong written and verbal communication skills are required.
• Must present the ability to execute job duties under stressful circumstances such as last-minute deadlines or other difficult situations.
• Must be willing to travel to various locations.
• Must have a valid driver’s license and reliable transportation.
• Regular attendance, work ethic and strong interpersonal skills are required for success in this position.
• Must consistently demonstrate behaviors that aligns with the company’s Mission, Vision, and Values, and perform in accordance with the standards outlined in our Performance Pillars.

What's in it for you?

• Comprehensive benefits package, including 401(k) with company match
• Generous paid time off programs
• Competitive compensation plan
• Great work environment
• Opportunities for advancement
• Apartment home discount

Grow a Career with Edward Rose & Sons!

Edward Rose & Sons is committed to career development for our team. We offer training and development through on the job, technical, sales, and leadership tracks and provide solid growth potential in all areas of our business.

Our Mission, Vision, and Values:

Our Mission: To consistently deliver quality homes, communities, and services provided by caring, empowered, and committed team members

Our Vision: To be the innovative industry leader in creating and developing value-oriented communities in the country

Our Values: Entrepreneurship, Integrity, Quality, and Respect

We are an Equal Opportunity Employer, and we affirmatively seek diversity in our workplace. We recruit qualified candidates and advance our employees without regard to race, color, religion, gender, age, disability, genetic information, ethnic or national origin, marital status, veteran status, or any other status or characteristic protected by federal, state or local laws

Who we are:

LER TechForce is an industry leader in embedded controls, software, functional safety, and engineering IT talent. For over 20 years LER has been working with customers across North America to meet their engineering resource challenges.

This is a full-time direct position.

Our client in Troy, MI is seeking an Account Manager to manage strategic relationships with automotive OEM customers and drive business growth for our portfolio of automotive audio systems, antennas, and cable solutions.

The role is responsible for RFQ management, commercial negotiations, and customer coordination throughout the program lifecycle, acting as the main interface between the customer and internal teams.

Key Responsibilities

• Manage and develop relationships with assigned automotive customers worldwide.
• Act as the primary commercial contact for all customer-related matters.
• Lead the RFQ (Request for Quotation) and offer preparation process in coordination with engineering and program teams.
• Negotiate pricing, development costs, tooling investments, and commercial terms within internal guidelines.
• Coordinate customer meetings, kick-off meetings, and program reviews.
• Monitor program milestones including SOP (Start of Production) and EOP (End of Production).
• Support business development activities and identify opportunities for new programs.
• Prepare sales forecasts, budgets, and customer portfolio analysis.

Requirements

• Bachelor’s degree in Business, Engineering, or Automotive-related field.
• 5-10+ years of experience in automotive sales or key account management with experience selling automotive electronics, connectivity, or audio systems.
• Experience working with automotive OEMs or Tier-1 suppliers.
• Strong negotiation, communication, and customer management skills.
• Ability to work in a cross-functional and international environment.
• Proficiency in CRM/ERP systems and Microsoft Office.

We are seeking a highly skilled and detail-oriented P&ID Designer or Process Engineer to join our engineering team. The ideal candidate will have hands-on experience in creating and revising Piping and Instrumentation Diagrams (P&IDs) using AutoCAD, Revit, and Plant 3D, with a strong understanding of ISO and industry standards. This role is critical to ensuring accurate documentation of process systems for industrial, manufacturing, or energy projects.

Key Responsibilities:

• Design and revise P&IDs for process systems in compliance with ISO and project-specific standards.
• Collaborate with mechanical, electrical, and process engineers to ensure accurate system representation.
• Use AutoCAD Plant 3D and Revit to model piping layouts, instrumentation, and equipment.
• Maintain and update engineering documentation, including BOMs, datasheets, and control narratives.
• Conduct quality checks and ensure drawings meet regulatory and safety requirements.
• Support project teams during design reviews, construction, and commissioning phases.
• Integrate P&IDs with 3D models and databases for intelligent documentation and asset tracking.

Qualifications:

• Bachelor’s degree in mechanical, Chemical, or Industrial Engineering (or equivalent experience).
• 3+ years of experience in P&ID design or process engineering.
• Proficiency in AutoCAD, Revit, and Plant 3D.
• Strong knowledge of ISO standards and ANSI/ISA instrumentation symbols.
• Familiarity with process control systems and industrial equipment.
• Excellent attention to detail and organizational skills.
• Strong communication and collaboration abilities.

Preferred Skills:

• Experience with SmartPlant P&ID or AVEVA Diagrams.
• Knowledge of BIM workflows and integration.
• Understanding of process safety and HAZOP documentation.
• Ability to automate tasks using scripts or macros in CAD environments.

Responsibilities:

• Test and troubleshoot automation equipment and electronic control systems
• Debug machine controls and adjust machine parameters as needed
• Run software and system tests to verify functionality and performance
• Analyze test data and help identify system or programming issues
• Work with engineering teams to resolve hardware and software problems
• Assist with PLC ladder logic debugging and basic CNC programming
• Support machine tryouts, final testing, and equipment runoffs
• Help with equipment startup and installations at customer sites when needed

Qualifications:

• Experience troubleshooting industrial automation or machine controls
• Familiarity with PLC ladder logic and automation systems
• Exposure to CNC machines, metal cutting machines, or assembly equipment
• Ability to read technical documentation and work with engineering teams
• Comfortable traveling occasionally for machine installations or startups

Nice to Have:

• Experience supporting machine builds, tryouts, or commissioning
• Background in controls engineering, automation, or electrical troubleshooting