Engineering Jobs in Windsor Locks, CT

Job Summary:

The 2nd Shift Production Supervisor leads a multi-department team of CNC Operators and Set-Up Operators, in a high mix / low volume aerospace component manufacturing environment. This role is expected to balance expertise in set-up and operation of CNC machining for precision tolerance components, along with strong interpersonal skills to motivate the team to work toward common goals and objectives. Key responsibilities include managing the day-to-day priorities for multiple departments, cross-training staff on best practices to meet set-up and production run-times, optimizing processes through the elimination of waste, and leading lean continuous improvement initiatives. As a working supervisor, this role is expected to run production jobs and provide the necessary supervisory management to a small 2nd shift team.

This role is 100% in office at our plant in East Hartford, CT.

At HORST we offer a variety of benefits including but not limited to:

• Competitive PTO Package
• Paid Company Holidays
• 401K Match Program
• Medical, Dental, Vision Benefits
• Tuition Reimbursement/Assistance Program

Essential Job Duties:

• Conduct security, quality and EH&S audits to ensure the safety of employees on the second shift, and compliance with company and customer policies.
• Coordinate time-off requests, with attention to skills matrix, to ensure adequate staffing level across all disciplines of machine centers to meet production needs.
• Motivate team to meet daily, weekly and monthly goals and objectives. Identify waste and non-value-added tasks that interfere with objectives.
• Routinely measure, monitor, and publish the performance of all individuals on the team. Compare results against department standards. Complete periodic performance evaluations, and correct any issues in real time as needed, up to and including, disciplinary actions if needed.
• Host a daily GEMBA walk and serve as the primary conduit for all communications between operators and cross functional teams. Attend production meetings, and quality clinic/MRB meetings as needed. Collaborate with engineering, purchasing, production and sales teams to drive open issues to rapid closure.
• Partner with production control to stage daily and weekly priorities. Ensure jobs are completed on time, and productivity is sustained. Expedite jobs as necessary.
• Set-up and operate CNC machines according to operation sheet instructions. Provide technical support for team.
• Maintain ERP data integrity ensuring job punches match traveler package. Report any discrepancies that could impact job quantity or delivery.
• Develop and author standard work for the operation of production equipment. Coach and train teammates in best practices, enforcing safety, departmental and QMS polices, with the goal of process improvement, reduction in set up time, faster productivity rates, and improved quality.

Experience & Skills:

• Minimum of 10 years progressive career in the manufacturing of precision machined components in a regulated industry such as aerospace or medical. Previous experience in a high mix, low volume shop with an emphasis on lean manufacturing preferred.
• Working knowledge of ISO/AS quality standards, basic OSHA/EHS safety regulations, and a commitment to adherence of company policies.
• Advanced or expert machining skills in 1 or more disciplines. Swiss lathe, multi-axis turning, turning, milling, or grinding. Must be able to independently set-up and operate CNC equipment and provide the necessary training to others on shift.
• Experience leading and managing a small team toward common goals. An effective communicator that can build rapport with a diverse team. Previous team lead experience preferred.
• A willingness to take accountability for self and team, driving and inheriting the collective results of a department or team.
• High degree of urgency to drive operations at full speed. Keen sense of attention to detail to understand how to work with pace, not haste, avoiding careless mistakes.
• Strong understanding of operational metrics such as first past yield, efficiency, WIP aging, on-time-delivery, job cost, scrap rate, etc.
• Strong computer skills especially related to navigating ERP systems, job clocking systems, CAD/CAM software, and Microsoft products such Outlooks, Excel, PowerPoint, etc. Previous experience with EPICOR a plus.

Physical Demands:

Legend

N (Not applicable)

Activity is not applicable to this position

O (Occasionally)

Position requires this activity up to 33% of the time (0-2.5 hours/day)

F (Frequently)

Position requires this activity up to 66% of the time (2.5-5.5 hours/day)

C (Constantly)

Position requires this activity more than 66% of the time (5.5+ hours/day)

Lift/Carry 10-30lbs

F

Stand

F

Walk

F

Manually manipulate

F

Squat or kneel

O

Bend

O

Reach above shoulder

O

PIcdef49d468

At HORST we offer a variety of benefits including but not limited to:

• Competitive PTO PackagePaid Company Holidays401K Match ProgramMedical, Dental, Vision BenefitsTuition Reimbursement/Assistance Program

Major Areas of Responsibility:

Requirements:

Physical Requirements:

PI12f15f9a85f4-26289-39677162

Title: New Product Introduction Engineer

Job Summary:

The incumbent will be responsible for project management from development through production launch for new products.

Supervisory Responsibilities: None

Duties/Responsibilities:

• Collaborate with customers, marketing, sales, manufacturing, engineering, and quality engineering to shepherd new programs from concept development to commercial launch.
• Position serves in a results-driven environment and requires a team-oriented individual.
• Develop project and manufacturing costs to support sales and marketing in business case development and program justification.
• Ability to understand customer requirements and translate those requirements into a manufacturable product design.
• Establish engineering / scientific objectives for projects.
• Coordinate tooling design, fabrication, start-up, and production ramp-up then turn over to manufacturing for new programs.
• Finalize specifications, designs, and contract reviews for specific market responsibilities.
• Ability to manage multiple projects at one time to agreed timelines and budgets.
• Independently plan and execute projects – i.e., program management
• Evaluated based on execution to the project timeline.
• Evaluated based on customer satisfaction.
• Evaluated on the successful launch of products to production.

The expectations for managing the programs are:

• Manage the phase gate process from purchase order receipt, through development and production release.
• Assemble a multi-disciplinary team (assigned by department managers) to execute project activities.
• Hold a kick-off meeting to launch the project.
• Create and maintain a project Gantt chart for schedule and critical deliverables.
• Hold review meetings as programs progress towards production.
• Participate in technical meetings.
• Manage customer meetings.
• Manage suppliers in the development phase.
• Generate presentations on project status.
• Mange the hand off of a project to production and the production sign-off of a project
• Participate with the team in a “hands on” manner: assist in writing / review of documents, assist with taking product samples, machine operation, manufacturing process review, and physical review of product quality.

Required Skills/Abilities:

• 3+ years of experience in manufacturing, product realization, or an applied industrial environment.
• Experience with automotive, aerospace, or medical manufacturing and quality systems desired. Proficiency in reading engineering prints along with an understanding of geometric dimensioning and tolerancing (GD&T).
• Skilled in utilizing spreadsheets for calculations, task management, and documentation.
• Manage team priorities and open tasks.
• Able to lead team meetings.

Experience & Education Requirements:

Bachelor of Science in Engineering or ten years of experience in manufacturing and program management.

Physical Requirements:

• Prolonged periods of sitting at a desk and working on a computer.
• Must be able to lift 15 pounds at times.
• Must be able to access and navigate each department at the organization’s facilities.

Technical Facilities Manager | $110k - $130k | Healthcare, Connecticut

Your new company

Hays have partnered with a leading energy infrastructure service firm, who are looking to hire an experienced Facilities Management leader to oversee the operation and optimization of a Central Energy Plant (CEP). The role will work with key stakeholders in guiding best-in-class energy strategies for thermal producing assets in a healthcare facility.

Your new role

As the Technical Facilities Manager, you will be responsible for analyzing daily energy usage and identifying opportunities to enhance efficiency and improve operational practices. Working daily with internal teams and 3rd party vendors, you will provide mentorship on energy management and support the development of long‑term strategies to maximize performance. The role will take full responsibility for the operation and maintenance of the CEP, ensuring all systems run safely, reliably, and efficiently. This includes managing maintenance reserve accounts, overseeing operator training, maintaining an up‑to‑date plant operating manual, and coordinating troubleshooting activities with both on‑site staff and remote support teams. You will also collaborate closely with engineering, procurement, and construction teams to align project activities with ongoing operations.

What you'll need to succeed

• PE preferred or FE and working towards obtaining PE.
• 4+ years’ experience in any of the following: management experience in a central plant or facility, mechanical construction with a large mechanical subcontractor or MEP design consultant managing multiple sites with large teams.
• 4 year Mechanical Engineering degree (plus, not required).
• Well versed in building codes and standards.
• Excellent communication and organizational skills.
• Effective verbal and written communication skills.
• Detail-oriented with the ability to multitask projects in a fast-paced environment.

What you'll get in return

You will have the opportunity to work with one of the nation’s largest energy‑as‑a‑service providers, with more than a century of industry expertise. With established accounts and long‑term contracts across some of the country’s largest healthcare and education systems, you will play a key role alongside experienced leaders in a mission‑critical environment.

Removes burrs and sharp edges or excess material from metal components including contouring certain edges and features.

Essential Duties & Responsibilities:

• 
  
• Removes excess metal and surface defects from aerospace hardware or machined surfaces using pneumatic or hand held abrasive wheels or belted grinding equipment.
  
• Uses abrasive belt or wheel according to customer specifications or type of finish specified, product being polished, or amount of metal to be removed, using knowledge of polishing operations and abrasives. Monitors abrasive wheel or belt for wear.
  
• Operates polisher, grinder, or deburring tools and removes metal and surface defects or contours edges of components based on specifications of blue-prints or work instructions.
  
• Inspects work for acceptability of finish. Moves finished components to next work station for further processing.
  
• Performs other work as assigned by the supervisor.
  

• Ability to lift or transfer components or objects of no more than 50 pounds.
• Understand and follow written and oral instructions in English and possess basic mathematical skills.
• Ability to read and interpret blueprints and assist in tooling and process development.
• Considerable ability to use a variety of hand and pneumatic tools.
• Ability to use precision hand held measuring devices, i.e., micrometer, vernier, go/no-go gauges, etc.
• Ability to use fine motor skills to manipulate small tools and perform meticulous work to close tolerances.
• Proficiently interacts with other employees and possess good interpersonal skills.

Education & Experience Required:

• High School diploma or GED
• 5+ years deburring experience or similar work involving fine polishing, grinding or contouring of metal parts in a manufacturing environment, preferably aerospace.

Working Conditions:

Light industrial work setting. Job involves lifting up to 50lbs. in a manufacturing environment that may occasionally require the employee to work in a number of awkward positions.

EOE Statement:

PCX Aerosystems is an equal opportunity employer.

This position is currently accepting applications.

Apply Now

**$2500 SIGN-ON BONUS**

Essential Duties & Responsibilities:

• 
  
• Set-up and operate Horizontal and Vertical CNC Lathes with Fanuc controls according to engineering specifications, instructions, GD&T and operation sheets. Knowledge of manual machines is a plus.
  
• Select appropriate cutting tools, fixtures and tool holders for a given job.
  
• Run similar jobs of short cycle times for extended periods of time where manufacturing processes are stable and do not require frequent change.
  
• Read and interpret engineering instructions, travelers, and blueprints and be familiar with geometric tolerances and principles.
  
• Operate more than one machine at a time, one to two machines depending on the nature of the job and its complexity, occasionally operating more than two machines depending on operator skill and familiarity with a given job.
  
• Must perform routine maintenance on assigned production equipment, i.e., maintain cleanliness of work area and machinery, check machinery fluids and alert maintenance personnel and/or supervisor of malfunctions.
  

Operate lifting and handling equipment such as hand truck, pallet jack, or overhead hoist to maneuver in-process or finished components to desired location.

Required Knowledge, Skills, & Abilities:

• 
  
• Knowledgeable of in-process inspection techniques, standards, and requirements. Able to use and interpret precision measuring devices such as micrometers, verniers, and various hand tools, i.e., gauges to verify the accuracy of dimensional characteristics of components.
  
• Knowledge of metal characteristics in a production setting is desirable.
  
• Knowledge of programming code, canned cycles, threading & boring jaws and makes program edits.
  
• Machinists must have good verbal and written communication skills; good math skills and good interpersonal skills. Must work well with colleagues, supervision and management.
  

Education & Experience Required:

• 
  
• 7 - 10 years Vertical or Horizontal CNC Lathe machining experience in a manufacturing environment, preferably aerospace.
  
• Fully capable of reading, understanding, and following written and oral work instructions in English.
  
• Ability to lift or transfer components or objects of no more than 50 pounds.
  
• HS diploma or GED.
  

This position is currently accepting applications.

Apply Now

Patent Litigation Associate - Technology

Our client is a top firm, seeking a Patent Litigation Associate for its New York, Boston, or Connecticut offices. The salary range for this position is between $200k to $260k.

Qualifications

• 1+ years of high tech patent litigation experience.
• Degree in Electrical Engineering, Computer Science, Physics, or related technology.
• Excellent academic credentials.
• Strong writing, verbal and interpersonal skills.
• All candidates must be authorized to work in the U.S.

About Us

Marina Sirras & Associates LLC is a boutique legal recruiting firm committed to connecting exceptional legal talent with top-tier law firms and in-house legal departments nationwide. With decades of experience and a personalized, relationship-driven approach, we take pride in understanding the unique needs of both our clients and candidates.

We are a proud member of the National Association of Legal Search Consultants (NALSC) and strictly adhere to the NALSC Code of Ethics. Marina Sirras, our founder, is a former President and Chairperson of the organization, reflecting our longstanding commitment to integrity and professionalism in legal recruiting.

To learn more about our team and services, please visit us at

Company Description

Adform Interiors is a trusted commercial interiors project partner based in Hartford, CT. Our unique approach has earned us a 100% customer satisfaction rating, and we value realistic project plans and budgets.

Role Description

We are seeking an experienced and driven Construction Project Manager to lead commercial interior, tenant fit-out, and ground-up construction projects from pre-construction through closeout. This role is ideal for a hands-on professional who thrives in a fast-paced environment and is motivated to grow into a Director of Construction position as our company continues to expand.

Typical Responsibilities include:

• Manage multiple projects from planning through completion
• Develop, track, and control project schedules, budgets, and costs
• Coordinate subcontractors, vendors, inspectors, and internal teams
• Lead project meetings and maintain clear communication with clients and stakeholders
• Review and manage contracts, change orders, RFIs, and submittals
• Ensure compliance with safety requirements, quality standards, and applicable building codes
• Identify project risks and implement proactive solutions
• Prepare and present regular project status and financial reports
• Assist with Site Supervision and coordination of daily site activities to ensure smooth project execution as required.
• Build and manage sub-contractor relationships for successful project delivery
• Contribute to process improvements and operational best practices

Growth & Leadership Path

This position is intentionally structured to grow into a Senior Project Manager Role and eventually a Director of Construction role. As Adform Interiors continues to scale, this individual will have the opportunity to:

• Oversee multiple project managers and field teams
• Establish and standardize project controls, reporting, and construction procedures
• Support strategic planning, forecasting, and workload management
• Participate in hiring, training, and mentoring construction staff
• Collaborate with executive leadership on company growth initiatives

Qualifications

• 5+ years of construction project management experience in commercial construction
• PMP (Project Management Professional) certification required
• Demonstrated success in delivering projects on time and within budget
• Strong understanding of construction methods, contracts, and cost controls
• Experience with Construction Online or comparable construction project management systems (e.g., Procore, Buildertrend, Autodesk Construction Cloud)
• Proficiency with scheduling, budgeting, and reporting tools
• Excellent leadership, communication, and organizational skills
• Ability to manage multiple projects and priorities simultaneously
• Bachelor’s degree in Construction Management, Engineering, or related field preferred (or equivalent experience)

Compensation & Benefits

• Salary range: $95,000 – $120,000, commensurate with experience
• Performance-based bonus tied to project and company performance
• Clearly defined advancement path to Senior Project Manager and Director of Construction
• Health benefits, paid time off, and paid holidays
• Small supportive team that cares, growth-oriented company culture
• Flexible Scheduling
• 401(k) Retirement plan
• Paid time off
• Dental Insurance
• Vision insurance
• Health insurance
• Life insurance access
• State-mandated benefits

Geologist Project Manager

We're seeking a Project Manager to lead Geologist projects. This role oversees project delivery, manages technical teams, and coordinates with clients, regulators, and subcontractors of challenging site characterization and remediation projects.

Key Responsibilities

• We are looking for creative, results driven individuals with strong backgrounds in team management, geology, hydrogeology, geochemistry, environmental science, or related fields
• Connecticut Licensed Environmental Professional (LEP) or someone on an LEP track
• BS/MS in Geology, Environmental Engineering, or similar major
• Minimum 8 years’ experience completing environmental investigation and remediation

The Quality Inspector is responsible for the inspection, documentation, and certification of critical components throughout the production process, including parts subject to flight safety requirements. This role ensures compliance with AS9100, customer specifications, and regulatory requirements through precise measurement and rigorous recordkeeping.

Essential Duties & Responsibilities:

Performs various inspection activities utilizing precision inspection equipment at all phases of product manufacturing. Uses GD&T concepts, customer supplied specifications, and internal standards, to ensure compliance with AS9100, NADCAP, and other regulatory requirements.

• 
  
• Read and understand complex engineering drawings to determine dimensions and tolerance specifications.
  
• Compare recorded measurements to blueprint dimensions and tolerances and notify specified persons of discrepancies using NCF and MRB process
  
• Familiarity with the use of various inspection and measurement equipment, i.e. CMM, FARO Arm, Borescope, Optical Comparator, etc. preferred
  
• Strong understanding of units of measure and applicability to GD&T principles
  
• Must be self-motivated and able to adjust to a dynamic work environment and tempo while maintaining a high level of attention to detail.
  
• Strong professional ethics combined with the ability to function well on teams.
  

• 
  
• Experience in aerospace manufacturing or similarly regulated industry preferred.
  
• Familiarity with performing various inspection activities to include, i.e., 1st piece, in-process, final inspections
  
• High School Diploma or GED
  
• Knowledgeable of MS Word, and Excel
  
• Minimum of 3 to 5 years' experience in the operation of CMM's preferred (Mitutoyo/Metris/Zeiss)
  
• Familiarity with operation/programming of FARO arm preferred
  

This position is currently accepting applications.

Apply Now

Job Title: Product Owner

Location: Hartford, CT

Duration: Long term contract

Company Profile: VLink, founded in 2006, is a leading global provider of software engineering services with next-gen technologies and best-in-class talent. Our Headquarters are in the U.S, and we have offices in 7+ countries from North America-Europe to APAC, with expansion plans in the Middle East. With over 1,000 employees working globally, VLink has helped SMBs, and large enterprises achieve their business goals, and gained the trust of Fortune-250 companies. VLink is ‘Great Place to Work? Certified™' and has been a consistent winner as- Best Places to Work in CT. Trust, collaboration, and accountability are the three elements that are at the core of VLink’s work culture. We value our professionals, providing comprehensive benefits and the opportunity for growth.

Required:

• Education: Bachelor’s degree in computer science, Information Technology, or a related field, or equivalent work experience
• 5+ years’ experience in product management function
• 5+ years required experience in software product management, with demonstrated success shipping software through multiple releases managing the entire lifecycle from discovery to launch in an agile environment
• 3+ years of experience working with agent/sales enablement platforms or similar internal-facing tools that support sales or customer service teams. (AA: things like sales & enrollment tools, CRMs
• Ability to work east cost hours
• 3+ years of experience working with an agile team in Scrum

Preferred:

• Experience with health insurance, Medicare
• Proficiency in Agile methodologies (Scrum, Kanban, SAFe, etc.) and product/project management tools (e.g., JIRA, Confluence, Lucid Charts, Miro, etc.).
• Communication and Organizational Skills: Excellent verbal and written communication skills, with a strong ability to organize and manage tasks effectively.
• Strong Software Development Knowledge – Understand coding, software architecture, and development processes and ability to adapt to current technologies
• Leadership: Proven ability to lead cross-functional teams, manage multiple stakeholders, and influence decision-making processes.

Employment Practices:

EEO, ADA, FMLA Compliant

VLink is an equal opportunity employer committed to fostering an inclusive environment where diversity is celebrated. All qualified applicants will be considered for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Employment is contingent upon successful completion of a background check. Applicant information will be handled in accordance with VLink's privacy policy.

Warm Regards,

Satpreet Singh

TruGreen accepts applications on an ongoing basis.

TruGreen is committed to providing personalized attention for our associates. We focus on developing our people by building proud, dynamic teams while helping associates reach their personal and professional goals. We continuously strive to make TruGreen an employer of choice and "a great place to work!"

Position Overview

Performs scheduled and preventative maintenance to production equipment, fleet vehicles and specialized equipment. Repairs equipment and orders parts as necessary. Maintains service/repair records.

Responsibilities

• Diagnoses and repairs fleet vehicle chassis and specialized vehicle back-end tank, pump and spray systems.

• Diagnoses and repairs tractors, forklifts, small engines and specialized equipment (aerators, seeders, spreaders, etc.).

• Responsible for accurately documenting all repairs in an electronic maintenance management system.

• Maintain parts inventory and work area in clean and orderly fashion.

• Arranges, follows up and documents outsourced maintenance performed by vendors and local service providers.

• Develops and executes preventative maintenance programs.

• Prepares and manages maintenance budget.

• Responds to vehicle and equipment breakdowns in field as needed/required.

Education and Experience Requirements

• High school diploma or general education degree (GED) and 1-4 years automotive mechanic experience required or equivalent combination of education and experience

Knowledge, Skills, and Abilities

• Ability to operate independently and collaboratively within a team.

• Computer skills with Microsoft Office applications (Word, Excel, Outlook, Internet Explorer, etc.).

• Ability to read and interpret documents such as safety rules, operating and maintenance instruction, and procedure manuals. Ability to write routine reports and correspondence.

• Mathematical skills to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume.

• Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.

• Attention to detail.

• Verbal and written communication skills.

• Time management and organizational skills, including punctuality for on-time attendance.

Physical Demands & Working Conditions

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Regularly required to:

• Sit, stand and walk

• Use hands and arms to handle, feel or reach

• Speak and hear

• Use close vision abilities

• Operate a vehicle with a valid drivers license

Occasionally required to:

• Lift or move up to 50 lbs

• Stoop, kneel, crouch or crawl

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.

 

Noise level

• Low to moderate
  
   

Adverse Conditions

• Minimal

Ability to speak, read and write fluently in English is required.

You MUST BE physically located in the United States while performing this job.

TruGreen is proud to affirm our commitment to hiring veterans. We recognize and appreciate the exceptional skills, dedication, and leadership that veterans bring to the workforce. By fostering an inclusive and diverse environment, we aim to leverage the unique experiences of veterans, creating a richer, more dynamic workplace.

This range is based on the qualifications necessary for the position, including experience, training, and other considerations permitted by law. Factors that may be used when making an offer may include a candidate’s skills, experience, and geographic location, the expected quality and quantity of work, and internal pay alignment, as needed. Most candidates will start in the bottom half of the pay range. The upper end of the range will generally be reserved for candidates with extensive experience. An employee’s pay history will not be a contributing factor where prohibited by local law. In addition to monetary compensation, we offer benefits, including Medical/Dental/Vision insurance and Company-matching 401(k) in addition to other programs and perks.

TruGreen is committed to Diversity and Inclusion. We encourage diverse candidates to apply to this position.
 
We are an Equal Opportunity/Affirmative Action Employer - Minorities/Females/Protected Veterans/Individuals with Disabilities. To learn more, please visit   EEOC/EEO | TruGreen ( ).

 

 
California Residents: When you express interest in or apply for a job with TruGreen Limited Partnership, we collect personal information about you, potentially including personal identifiers, contact information, protected classifications, pre-hire information, professional or employment-related information, education history, and/or medical information, for the following business purposes: to comply with state and federal law and regulations requiring employers to maintain certain records; to evaluate your job application and candidacy for employment; and to obtain and verify background checks (including criminal and motor vehicle records), pre-employment drug testing, and references.

Massachusetts Residents: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

TruGreen accepts applications on an ongoing basis.

Job Description

TruGreen is committed to providing personalized attention for our associates. We focus on developing our people by building proud, dynamic teams while helping associates reach their personal and professional goals. We continuously strive to make TruGreen an employer of choice and "a great place to work!"

Position Overview

Performs scheduled and preventative maintenance to production equipment, fleet vehicles and specialized equipment. Repairs equipment and orders parts as necessary. Maintains service/repair records.

Responsibilities

• Diagnoses and repairs fleet vehicle chassis and specialized vehicle back-end tank, pump and spray systems.
• Diagnoses and repairs tractors, forklifts, small engines and specialized equipment (aerators, seeders, spreaders, etc.).
• Responsible for accurately documenting all repairs in an electronic maintenance management system.
• Maintain parts inventory and work area in clean and orderly fashion.
• Arranges, follows up and documents outsourced maintenance performed by vendors and local service providers.
• Develops and executes preventative maintenance programs.
• Prepares and manages maintenance budget.
• Responds to vehicle and equipment breakdowns in field as needed/required.

Education and Experience Requirements

• High school diploma or general education degree (GED) and 1-4 years automotive mechanic experience required or equivalent combination of education and experience

Knowledge, Skills, and Abilities

• Ability to operate independently and collaboratively within a team.
• Computer skills with Microsoft Office applications (Word, Excel, Outlook, Internet Explorer, etc.).
• Ability to read and interpret documents such as safety rules, operating and maintenance instruction, and procedure manuals. Ability to write routine reports and correspondence.
• Mathematical skills to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume.
• Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.
• Attention to detail.
• Verbal and written communication skills.
• Time management and organizational skills, including punctuality for on-time attendance.

Physical Demands & Working Conditions

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Regularly required to:

• Sit, stand and walk
• Use hands and arms to handle, feel or reach
• Speak and hear
• Use close vision abilities
• Operate a vehicle with a valid drivers license

Occasionally required to:

• Lift or move up to 50 lbs
• Stoop, kneel, crouch or crawl

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.
 

Noise level

• Low to moderate
    Adverse Conditions
  • Minimal
  Ability to speak, read and write fluently in English is required. You MUST BE physically located in the United States while performing this job. TruGreen is proud to affirm our commitment to hiring veterans. We recognize and appreciate the exceptional skills, dedication, and leadership that veterans bring to the workforce. By fostering an inclusive and diverse environment, we aim to leverage the unique experiences of veterans, creating a richer, more dynamic workplace.

Pay Ranges

 
California Residents: When you express interest in or apply for a job with TruGreen Limited Partnership, we collect personal information about you, potentially including personal identifiers, contact information, protected classifications, pre-hire information, professional or employment-related information, education history, and/or medical information, for the following business purposes: to comply with state and federal law and regulations requiring employers to maintain certain records; to evaluate your job application and candidacy for employment; and to obtain and verify background checks (including criminal and motor vehicle records), pre-employment drug testing, and references.

Massachusetts Residents: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

TruGreen accepts applications on an ongoing basis.

Job Description

TruGreen is committed to providing personalized attention for our associates. We focus on developing our people by building proud, dynamic teams while helping associates reach their personal and professional goals. We continuously strive to make TruGreen an employer of choice and "a great place to work!"

Position Overview

Performs scheduled and preventative maintenance to production equipment, fleet vehicles and specialized equipment. Repairs equipment and orders parts as necessary. Maintains service/repair records.

Responsibilities

• Diagnoses and repairs fleet vehicle chassis and specialized vehicle back-end tank, pump and spray systems.
• Diagnoses and repairs tractors, forklifts, small engines and specialized equipment (aerators, seeders, spreaders, etc.).
• Responsible for accurately documenting all repairs in an electronic maintenance management system.
• Maintain parts inventory and work area in clean and orderly fashion.
• Arranges, follows up and documents outsourced maintenance performed by vendors and local service providers.
• Develops and executes preventative maintenance programs.
• Prepares and manages maintenance budget.
• Responds to vehicle and equipment breakdowns in field as needed/required.

Education and Experience Requirements

• High school diploma or general education degree (GED) and 1-4 years automotive mechanic experience required or equivalent combination of education and experience

Knowledge, Skills, and Abilities

• Ability to operate independently and collaboratively within a team.
• Computer skills with Microsoft Office applications (Word, Excel, Outlook, Internet Explorer, etc.).
• Ability to read and interpret documents such as safety rules, operating and maintenance instruction, and procedure manuals. Ability to write routine reports and correspondence.
• Mathematical skills to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume.
• Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.
• Attention to detail.
• Verbal and written communication skills.
• Time management and organizational skills, including punctuality for on-time attendance.

Physical Demands & Working Conditions

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Regularly required to:

• Sit, stand and walk
• Use hands and arms to handle, feel or reach
• Speak and hear
• Use close vision abilities
• Operate a vehicle with a valid drivers license

Occasionally required to:

• Lift or move up to 50 lbs
• Stoop, kneel, crouch or crawl

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.
 

Noise level

• Low to moderate
    Adverse Conditions
  • Minimal
  Ability to speak, read and write fluently in English is required. You MUST BE physically located in the United States while performing this job. TruGreen is proud to affirm our commitment to hiring veterans. We recognize and appreciate the exceptional skills, dedication, and leadership that veterans bring to the workforce. By fostering an inclusive and diverse environment, we aim to leverage the unique experiences of veterans, creating a richer, more dynamic workplace.

Pay Ranges

 
California Residents: When you express interest in or apply for a job with TruGreen Limited Partnership, we collect personal information about you, potentially including personal identifiers, contact information, protected classifications, pre-hire information, professional or employment-related information, education history, and/or medical information, for the following business purposes: to comply with state and federal law and regulations requiring employers to maintain certain records; to evaluate your job application and candidacy for employment; and to obtain and verify background checks (including criminal and motor vehicle records), pre-employment drug testing, and references.

Massachusetts Residents: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

This is a very exciting time for Thryv as we are making waves in becoming an international leading SaaS and platforms business provider for Small to Medium-Sized Businesses (SMB’s). We’ve been around in one form or another for more than 125 years, always with one goal in mind – helping small businesses compete and win. We provide the technology, software and local business automation tools that small businesses need to better manage their time, communicate with clients, and get paid so they can take control of their business and be more successful. Thryv is a seven-time winner of Selling Power Magazine’s Top 60 companies to Sell For, as well as Newsweek’s list of America’s 100 most loved global workplaces for 2024 and 2025!

Thryv, Inc. - Thryv Makes Selling Power’s Annual 60 Best Companies to Sell for List for Seventh Consecutive Year

Global Most Loved Workplaces 2025 - Newsweek

About the role:

Based in the Hartford, Connecticut area, this role is responsible for increasing Thryv’s penetration to the existing client base, increasing client engagement with existing software clients, and growing the SaaS client base through new sales. This role calls on existing clients to nurture and grow relationships while identifying and pursuing new client opportunities to meet a predetermined sales quota. The Software Account Executive conducts greater than 50% of their work outside their home office (to visit local businesses).

• Identifies and secures new SaaS clients by leveraging self-generated prospecting (i.e. networks, referrals, etc.) and company-initiated prospecting programs (90%)
• Contacts assigned clients and presents opportunities for additional sales and/or extended usage based on client needs (10%).
• Executes all defined operational processes and requirements with excellence (i.e., designed cadences for client and prospect engagement, ongoing product and demo certifications, order entry requirements, centralized intake forms, etc.).
• Participates in sales meetings, call calibrations, and training as needed.

About Thryv- End-to-end client experience platform:

Thryv provides a secure, easy-to-use platform that automates tasks and allows clients to put their customers at the center of their business. Our software offers Customer Relationship Management (CRM), Search Engine Optimization, Marketing, online invoices & receipts, text messaging, email marketing, print and social media management. This automation provides the edge local businesses need to better succeed in their market.

We do it all with a convenient client experience management app that allows small business owners to get the job, manage the job and get credit all from the palm of their hand.

In This Role, You’ll Get To:

• Help market, sell and grow local business market share
• Defend small business America and the American Dream
• Hunt for new business (90%), as well as take care of existing clients (10%)
• Become a SaaS (Software as a Service) expert
• Receive world-class training (8 weeks virtual)
• Have the support of a four-time winner of The Top 60 Companies to Sell For company with a 125+ year legacy
• Educate and guide prospects through the buyer’s journey to help them learn how Thryv can grow their business
• Partner with marketing and technology departments to execute sales strategy as the company introduces enhancements to existing solutions and/or releases new products
• Bring your thinking, strategies and ideas to advance our company’s values, unique culture and vision for the future

We Are Looking for People Who:

• We are seeking driven and hungry individuals to strategize and offer our unique software solutions to local business owners
• Who are engagement gurus while properly managing expectations
• Have the desire and commitment to do what it takes to be successful in sales
• Have a positive outlook and a strong ability to take responsibility for their successes and failures
• Goal oriented…you’re known for destroying your sales goals
• Persuasive…you can explain software solutions in simple terms
• Exceed sales quotas and expectations
• Build and nurture a pipeline of prospects and close deals
• Develop great solutions to help customers WIN!
• Comfortable working in a remote capacity: Hi-Speed internet, acceptable office setting and proper business attire is a must.

Basic Qualifications

• 4+ years of related sales experience (7+ years is preferred)
• 3+ years of experience in an (outbound) full sales cycle role is required
• Experience in a SaaS role or company is preferred, but not required
• The ideal candidate will have experience in Enterprise-level sales (not a requirement)
• Strong industry knowledge with the ability to gain a thorough understanding of the Thryv product suite
• Exceptional interpersonal and communication skills, both written and verbal, with strong emotional intelligence, adaptability, and the ability to build relationships.
• Time and organization skills with the ability to effectively manage multiple priorities with competing schedules or conflicting demands
• Ability to work independently in a remote-first environment, effectively conducting sales presentations while following company established processes and procedures
• Strong technical skills with proficiency in MS office and the ability to learn new programs and systems
• Associate degree (or international equivalent) or equivalent experience required

Who We Are

At Thryv, we’re a team fiercely devoted to the success of local businesses. We’ve been around for over 100 years, always with one goal in mind — helping small businesses compete, win and succeed. We provide the technology, software and local business automation tools small business owners need to better manage their time, communicate with clients, and get paid, so they can take control of their business and be more successful. We support businesses across the U.S., and we have team members all around the country (even internationally). In fact, we’re a work-from-anywhere company, because that’s how we get the work done. Culture is vital at Thryv because it shapes our identity and, therefore, our measurements for growth. We have an identified set of values that hold all of us accountable, paving the way for our company success and our legacy. All of this helps us deliver results for our clients and creates success for our employees. Here at Thryv, making a positive impact within our team and in our local community is the reason we get out of bed every morning.

Find out more at /careers/

Belonging at Thryv

We believe in a work environment where all individuals are treated fairly and respectfully, have equal access to opportunities and resources, and can contribute fully to the organization’s success. We want our employees to feel a part of something big, and we encourage the sharing of ideas and collaboration across the organization. We strive to ensure our work environment reflects diversity, fairness and meritocracy. We believe all employees should have the opportunity to perform effectively in their position. We value every employee and the authenticity they bring to their role and to the organization. As a result, our employee policies and internal practices focus on ability and merit as the standards for success.

Requisition Detail and Process

This information indicates the general nature and level of work performed by employees in this job. It is not designed to contain a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job. The duties and responsibilities in this job description may be subject to change at any time due to reasonable accommodation or other reasons. The final job level offered may vary based on the applicant’s competencies and qualifications such as experience and education, and other job-related reasons.

Our Commitment to Equal Opportunity

Thryv is proud to provide equal employment opportunities to all employees and applicants, without regard to gender, color, race, religion, sexual orientation, national origin, citizenship, age, disability, veteran status, pregnancy, genetic information, or any characteristic protected by law. Thryv is committed to provide equal employment opportunities throughout the employment relationship including recruitment, hiring, discharge, compensation, benefits, discipline, development, and advancement or other aspects of employment.

The estimated on-target earnings (OTE) for this role, which includes base salary and incentives, is $148,600 per year, with the potential to earn more in most U.S. locations. Final offer amounts are determined based on the candidate’s location and may vary from the figure listed above.

Technical Sales Representative

Our client is a World Leading Corporation in industrial automation products with an excellent training program, providing opportunities for promotion and compensation growth.

***Hiring for a July start date!

Responsibilities:

• Work directly with customers to understand their business operations and provide face-to-face consultations to add value to their organization through implementation of multiple innovative products.

• Demonstrate a high degree of flexibility in adapting to Company expectations and the challenges customers present you.

• Travel to customer locations within the Hartford area and work successfully in a wide variety of manufacturing and laboratory environments.

• Prospect new business through warm leads/some cold calls and collaboration with sales office team to exceed monthly, quarterly, and yearly sales quotas.

Qualifications:

• Bachelor’s degree. Any major is fine -- Business, Engineering, etc.

• Goal-oriented and extremely hard working with a desire to make a measurable contribution to company success.

• Desire for self-improvement through intensive training, mentorship, engaged management and pro-active, process-oriented sales approach. Considered one of the best training programs in the US!

• Willingness to travel 3 days each week locally, including 5 to 6 nights/ month of overnight travel.

Compensation:

Greater Hartford, CT - $65,460 Salary + $24K Bonus + Car Expense + Expense Account +Cell phone +lap top + Full Benefits

$90,000 first year

$110,000-$115,000 in year 2

Up to $120,000 to $130,000 year 3 - Lots of opportunities for advancement

***Hiring for a July start date.

Please attach resume!

Company Description

For more than a decade, Island Exterior Fabricators (IEF) has operated as a privately owned practice specializing in the delivery of bespoke, high-performing prefabricated facade systems. Our 50-acre manufacturing campus is headquartered in Calverton, New York, and supported by design and engineering offices in Manhattan, Boston, and Hartford.

Our organization is fully self-sustained, supported by state-of-the-art equipment and facilities that enable us to deliver a high-quality product. Our production capabilities, installation network, and bonding capacity allow Island to complete large-scale, complex projects in a timely, efficient manner.

Job Summary: As a Payroll Specialist at IEF, you will be accountable for the accurate, timely, and compliant processing of multi-state payroll for salaried and hourly employees. This role ensures adherence to federal, state, and local wage and tax laws, maintains payroll records, and serves as a trusted point of contact for payroll-related questions. The position partners closely with the People Operations team, Finance, and external vendors to support payroll operations across multiple jurisdictions.

Accountabilities:

• Process weekly payroll accurately and on schedule for multi-state employees
• Ensure compliance with federal, state, and local payroll tax laws, unemployment, and local tax requirements.
• Administer payroll changes including new hires, terminations, promotions, salary adjustments, bonuses, commissions, and retroactive pay.
• Maintain accurate payroll records, earnings, deductions, garnishments, and benefit contributions.
• Reconcile payroll reports, tax filings, and general ledger entries, partner with Finance on variance resolution.
• Coordinate payroll tax filings, W-2s, and year-end reporting with internal teams and third-party providers.
• Manage payroll audits and respond to tax notices, wage verifications, and agency inquiries.
• Ensure compliance with wage and hour laws, including overtime, paid leave programs, and statutory deductions.
• Support benefits deductions, 401(k) contributions, and coordination with benefits administrators.
• Maintain confidentiality and data integrity of all payroll and employee information.
• Identify opportunities to improve payroll processes, controls, and documentation.

Authorities:

• Process payroll transactions and adjustments within approved policies and established controls.
• Communicate directly with payroll vendors, tax agencies, and benefits providers regarding routine matters.
• May resolve routine payroll discrepancies independently; escalates complex compliance or legal issues appropriately.
• Provides guidance to managers and employees on payroll procedures, timelines, and standard policies.
• Participates in payroll system updates, testing, and process improvements.

Minimum Qualifications:

• Bachelor’s degree in accounting, finance, or a related field or combination of education and experience.
• 3 + years’ experience in payroll.
• Demonstrated experience processing multi-state payroll, with strong working knowledge of NY and CT requirements.
• Solid understanding of federal, state, and local payroll tax laws and wage and hour regulations.
• Experience with registering with state agency portals and employer registration in various states

Salary Range: $75,000 – $80,000

Location: East Hartford, CT

Schedule: Monday – Friday 8:00am – 5:00pm - Hybrid

Benefits: 401(k) matching, AD&D insurance, Dental insurance, Family leave, Flexible schedule, Flexible spending account Gym membership, Health insurance, Health savings account, Life insurance, Paid time off, Parental leave, Professional development assistance, Vision insurance.

ADA Requirements: The position requires the ability to sit or stand for extended periods while using a computer, along with sufficient manual dexterity to operate computers, mobile devices, and related IT equipment. The role may occasionally involve lifting or moving equipment weighing up to 25 pounds, as well as bending, crawling, or climbing—such as accessing under desks or server racks. Candidates must possess the ability to concentrate, troubleshoot, and solve problems in a fast-paced environment, demonstrating strong verbal and written communication skills. The role also demands effective task prioritization, management of multiple simultaneous support requests, and a capacity to quickly learn and adapt to evolving technologies and tools.

Island Exterior Fabricators is an equal-opportunity employer. We offer a welcoming and inclusive environment. All applicants are considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.

Notice to Staffing Agencies

Island Exterior Fabricators and its subsidiaries will not accept unsolicited resumes from any source other than directly from a candidate. Any unsolicited resumes sent to Island, including unsolicited resumes sent to an Island mailing address, fax machine or email address, directly to Island employees, or to Island's resume database will be considered Island property. Island will NOT pay a fee for any placement resulting from the receipt of an unsolicited resume.