Engineering Jobs in Whitney Nevada Remote
191 positions found — Page 5
J
Electronics Technician III - Creech
🏢 JT4 LLC
Salary not disclosed
JT4, LLC provides engineering and technical support to multiple western test ranges for the U.S.
Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.
JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.
JOB SUMMARY
- ESSENTIAL FUNCTIONS/DUTIES Working under general technical guidance, an Electronic Technician III specializes in ground-based electronic systems, communications infrastructure, and works on various types of electronic and network equipment and related devices through a combination of installing, maintaining, repairing, overhauling, troubleshooting, modifying, construction, and testing Employee will be responsible for the following functions/duties: Certifies assigned systems and sub-systems to ensure compliance with USAF and Federal Aviation Administration (FAA) established standards and safety requirements.
Determines when equipment malfunctions warrant shutdown of various systems.
Acts as expert technical consultant to determine whether systems are operationally acceptable and safe within the prescribed standards and tolerances for air traffic control and air navigation.
Operate and maintain electronic transmitting and receiving equipment, digital and analog computers, industrial measuring and controlling equipment, microwave amplifiers and transmission lines, high-voltage power supplies and keying circuits, indicators and displays, and antenna positioning systems Utilizes technical knowledge of electronic principles to troubleshoot and solve problems using diagrams, schematics, engineering data, and test equipment Diagnose equipment malfunctions and effect repairs to restore equipment to required operating condition Configure equipment utilizing manufacturer software interfaces; troubleshoot to the component level and make needed repairs Lead other junior personnel in the planning and installation activities of new and modified systems Research new products, support integration, develop operator instructions and configuration drawings Perform other job-related duties, as required REQUIREMENTS
- EDUCATION, TECHNICAL, AND WORK EXPERIENCE An associate's degree or higher from an accredited college; or technical schooling with courses in math, basic electronics, and microwave theory; or a military equivalent and a minimum of seven years of hands-on experience are required for this position.
In addition, an Electronic Technician III must possess the following qualifications: Minimum of five years proficiency in maintaining electronic equipment Minimum of five years' experience using multi-meters, oscilloscopes, copper, fiber, and coax testers Minimum of five years maintaining Digital Airport Surveillance Radar (DASR-AN/GPN-30); FMQ-19 or 23 Weather System; GRC, GRT, GRR, CM-300, URC-200 Radio Systems; FCS-127 ETVS; GSH-74 DALR, Instrument Landing System (ILS), TACAN, associated support equipment Interpret drawings, training manuals, and instructions in order to perform duties Good understanding of electronic, electro-mechanical, and computer systems Experience maintaining ground to air VHF/UHF radios Demonstrated ability to troubleshoot to the component level and competency in soldering.
SALARY This non-exempt position offers an AWD Rate of $36.59 per hour.
Note: The salary offered for this position is a good faith description of the expected salary range this role will pay.
JT4, LLC considers factors such as (but not limited to) responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and business considerations when extending an offer.
BENEFITS Medical, Dental, Vision Insurance Benefits Active on Day 1 Life Insurance Health Savings Accounts/FSA's Disability Insurance Paid Time Off 401(k) Plan Options with Employer matching JT4 will match 50%, up to an 8% contribution 100% Immediate Vesting Tuition Reimbursement OTHER RESPONSIBILITIES Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job.
WORKING CONDITIONS Employee will be required to work some shift work, at remote locations, off site mission support and occasional over-night assignments.
Work is performed both indoors and outdoors.
Outdoor duties may be performed on even or uneven surfaces, which may be dry or wet.
Grease or oil may be found on working surfaces.
Outdoor duties may be performed on gravel or shingled roof.
Climbing stairs, ladders, towers, and scaffolds, and the ability to lift up to 50 lbs, (anything heavier requires two or more people or mechanical assistance) are required.
A government vehicle is used on an as-needed basis.
DISCLAIMER The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.
Tasking is in support of a Federal Government Contract that requires U.S.
citizenship.
Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment.
SCC: JELT4, JOM68; A2NTTR
Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.
JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.
JOB SUMMARY
- ESSENTIAL FUNCTIONS/DUTIES Working under general technical guidance, an Electronic Technician III specializes in ground-based electronic systems, communications infrastructure, and works on various types of electronic and network equipment and related devices through a combination of installing, maintaining, repairing, overhauling, troubleshooting, modifying, construction, and testing Employee will be responsible for the following functions/duties: Certifies assigned systems and sub-systems to ensure compliance with USAF and Federal Aviation Administration (FAA) established standards and safety requirements.
Determines when equipment malfunctions warrant shutdown of various systems.
Acts as expert technical consultant to determine whether systems are operationally acceptable and safe within the prescribed standards and tolerances for air traffic control and air navigation.
Operate and maintain electronic transmitting and receiving equipment, digital and analog computers, industrial measuring and controlling equipment, microwave amplifiers and transmission lines, high-voltage power supplies and keying circuits, indicators and displays, and antenna positioning systems Utilizes technical knowledge of electronic principles to troubleshoot and solve problems using diagrams, schematics, engineering data, and test equipment Diagnose equipment malfunctions and effect repairs to restore equipment to required operating condition Configure equipment utilizing manufacturer software interfaces; troubleshoot to the component level and make needed repairs Lead other junior personnel in the planning and installation activities of new and modified systems Research new products, support integration, develop operator instructions and configuration drawings Perform other job-related duties, as required REQUIREMENTS
- EDUCATION, TECHNICAL, AND WORK EXPERIENCE An associate's degree or higher from an accredited college; or technical schooling with courses in math, basic electronics, and microwave theory; or a military equivalent and a minimum of seven years of hands-on experience are required for this position.
In addition, an Electronic Technician III must possess the following qualifications: Minimum of five years proficiency in maintaining electronic equipment Minimum of five years' experience using multi-meters, oscilloscopes, copper, fiber, and coax testers Minimum of five years maintaining Digital Airport Surveillance Radar (DASR-AN/GPN-30); FMQ-19 or 23 Weather System; GRC, GRT, GRR, CM-300, URC-200 Radio Systems; FCS-127 ETVS; GSH-74 DALR, Instrument Landing System (ILS), TACAN, associated support equipment Interpret drawings, training manuals, and instructions in order to perform duties Good understanding of electronic, electro-mechanical, and computer systems Experience maintaining ground to air VHF/UHF radios Demonstrated ability to troubleshoot to the component level and competency in soldering.
SALARY This non-exempt position offers an AWD Rate of $36.59 per hour.
Note: The salary offered for this position is a good faith description of the expected salary range this role will pay.
JT4, LLC considers factors such as (but not limited to) responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and business considerations when extending an offer.
BENEFITS Medical, Dental, Vision Insurance Benefits Active on Day 1 Life Insurance Health Savings Accounts/FSA's Disability Insurance Paid Time Off 401(k) Plan Options with Employer matching JT4 will match 50%, up to an 8% contribution 100% Immediate Vesting Tuition Reimbursement OTHER RESPONSIBILITIES Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job.
WORKING CONDITIONS Employee will be required to work some shift work, at remote locations, off site mission support and occasional over-night assignments.
Work is performed both indoors and outdoors.
Outdoor duties may be performed on even or uneven surfaces, which may be dry or wet.
Grease or oil may be found on working surfaces.
Outdoor duties may be performed on gravel or shingled roof.
Climbing stairs, ladders, towers, and scaffolds, and the ability to lift up to 50 lbs, (anything heavier requires two or more people or mechanical assistance) are required.
A government vehicle is used on an as-needed basis.
DISCLAIMER The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.
Tasking is in support of a Federal Government Contract that requires U.S.
citizenship.
Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment.
SCC: JELT4, JOM68; A2NTTR
Not Specified
J
DLO - Data Link Operator
🏢 JT4 LLC
Salary not disclosed
JT4, LLC provides engineering and technical support to multiple western test ranges for the U.S.
Air Force and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.
JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.
JOB SUMMARY
- ESSENTIAL FUNCTIONS/DUTIES Perform operations on assigned Joint Data Network (JDN) / Link-16 equipment.
Perform a variety of assignments involving technology applications involved in the installation, operation, testing, and maintenance of complex electronic/mechanical equipment and systems.
Supports functions as a network manager for locally operated networks and modify and operate equipment associated with Link-16 as required.
Provides the correct information required to operate in the network (as extracted from the appropriate Operational Tasking Data Links (OPTASK LINK) message) directly to own-unit platforms and to other participants.
Extracts data from an OPTASK LINK message, as defined in Mil-STD 6040, U.S.
Message Text Formatting Program and to provide platforms with data essential to operate Tactical Data Links (TDL).
Align track number blocks with procedures as indicated in the appropriate TDL section of the OPTASK LINK.
Acts as a Multi-TDL expert and interfaces between wing TDL participants and other elements of the TDL operational infrastructure.
Interfaces between own unit platforms and the exercise/host manager when wing assets are either participating in an exercise or deploying to participate in TDL operations managed by another unit.
Coordinates unit TDL equipment requirements and the networks to meet local unit requirements, to include interfacing between the wing and higher level agencies.
Knowledge of and follow procedures mandated in CJCSM 6120.01, Joint Multi-Tactical Data Link Operating Procedures when operating TDL's.
Maintain a TDL reference library.
The employee shall obtain network descriptions for all networks, to include joint and allied networks, and maintain them in a local TDL network library for use by operations personnel.
Determines requirements for networks and identifies them to the appropriate agency tasked with providing network support.
Manages training requirements applicable to local and subordinate unit link operators.
Perform other related duties and assignments as directed.
REQUIREMENTS
- EDUCATION, TECHNICAL AND WORK EXPERIENCE Associates Degree in a technical discipline or formal academic/vocational/military training with a minimum of 7 years of experience in the specialty field are required for this position.
Minimum of two years of experience with Link-16 equipment.
Completion of JT-101, Introduction to Joint Multi-TDL Network Operations, is required or must be completed upon hire.
Completion of JT-102, Multi-TDL Advanced Joint Interoperability Course, is preferred.
Must be able to obtain and maintain a Network+/Security+ Certification as required.
The incumbent must possess broad knowledge of Link-16 operations.
This position requires knowledge on the Joint Range Extension (JRE) Client Software, Battlefield Command and Control Center
- Theater (BC3-T), Air Defense Systems Integrator, Amalgamated Remote Management System (ARMS), and various other types of associated Link-16 equipment and software.
Excellent communications and analytical skills; working knowledge of computer systems and integrated software application programs.
The position may require the ability to investigate, troubleshoot, and design solutions to problems in operational hardware and software.
BENEFITS Medical, Dental, Vision Insurance Benefits Active on Day 1 Life Insurance Health Savings Accounts/FSA's Disability Insurance Paid Time Off 401(k) Plan Options with Employer Match JT4 will match 50%, up to an 8% contribution 100% Immediate Vesting Tuition Reimbursement OTHER RESPONSIBILITIES Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job.
WORKING CONDITIONS This position involves work typical of an office environment with no unusual hazards.
There is occasional lifting (up to 20 pounds), constant sitting and use of a computer terminal, constant use of sight abilities while writing, reviewing, and editing documents, constant use of speech/hearing abilities for communication, and constant mental alertness.
Routine travel to remote Company work locations may be required.
Disclaimer The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.
Tasking is in support of a Federal Government Contract that requires U.S.
citizenship.
Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment.
SCC: JENG17; A2NTTR
Air Force and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.
JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.
JOB SUMMARY
- ESSENTIAL FUNCTIONS/DUTIES Perform operations on assigned Joint Data Network (JDN) / Link-16 equipment.
Perform a variety of assignments involving technology applications involved in the installation, operation, testing, and maintenance of complex electronic/mechanical equipment and systems.
Supports functions as a network manager for locally operated networks and modify and operate equipment associated with Link-16 as required.
Provides the correct information required to operate in the network (as extracted from the appropriate Operational Tasking Data Links (OPTASK LINK) message) directly to own-unit platforms and to other participants.
Extracts data from an OPTASK LINK message, as defined in Mil-STD 6040, U.S.
Message Text Formatting Program and to provide platforms with data essential to operate Tactical Data Links (TDL).
Align track number blocks with procedures as indicated in the appropriate TDL section of the OPTASK LINK.
Acts as a Multi-TDL expert and interfaces between wing TDL participants and other elements of the TDL operational infrastructure.
Interfaces between own unit platforms and the exercise/host manager when wing assets are either participating in an exercise or deploying to participate in TDL operations managed by another unit.
Coordinates unit TDL equipment requirements and the networks to meet local unit requirements, to include interfacing between the wing and higher level agencies.
Knowledge of and follow procedures mandated in CJCSM 6120.01, Joint Multi-Tactical Data Link Operating Procedures when operating TDL's.
Maintain a TDL reference library.
The employee shall obtain network descriptions for all networks, to include joint and allied networks, and maintain them in a local TDL network library for use by operations personnel.
Determines requirements for networks and identifies them to the appropriate agency tasked with providing network support.
Manages training requirements applicable to local and subordinate unit link operators.
Perform other related duties and assignments as directed.
REQUIREMENTS
- EDUCATION, TECHNICAL AND WORK EXPERIENCE Associates Degree in a technical discipline or formal academic/vocational/military training with a minimum of 7 years of experience in the specialty field are required for this position.
Minimum of two years of experience with Link-16 equipment.
Completion of JT-101, Introduction to Joint Multi-TDL Network Operations, is required or must be completed upon hire.
Completion of JT-102, Multi-TDL Advanced Joint Interoperability Course, is preferred.
Must be able to obtain and maintain a Network+/Security+ Certification as required.
The incumbent must possess broad knowledge of Link-16 operations.
This position requires knowledge on the Joint Range Extension (JRE) Client Software, Battlefield Command and Control Center
- Theater (BC3-T), Air Defense Systems Integrator, Amalgamated Remote Management System (ARMS), and various other types of associated Link-16 equipment and software.
Excellent communications and analytical skills; working knowledge of computer systems and integrated software application programs.
The position may require the ability to investigate, troubleshoot, and design solutions to problems in operational hardware and software.
BENEFITS Medical, Dental, Vision Insurance Benefits Active on Day 1 Life Insurance Health Savings Accounts/FSA's Disability Insurance Paid Time Off 401(k) Plan Options with Employer Match JT4 will match 50%, up to an 8% contribution 100% Immediate Vesting Tuition Reimbursement OTHER RESPONSIBILITIES Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job.
WORKING CONDITIONS This position involves work typical of an office environment with no unusual hazards.
There is occasional lifting (up to 20 pounds), constant sitting and use of a computer terminal, constant use of sight abilities while writing, reviewing, and editing documents, constant use of speech/hearing abilities for communication, and constant mental alertness.
Routine travel to remote Company work locations may be required.
Disclaimer The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.
Tasking is in support of a Federal Government Contract that requires U.S.
citizenship.
Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment.
SCC: JENG17; A2NTTR
Not Specified
C
Chrysler Certified Master Technician
Salary not disclosed
Chrysler Certified Master Technician
**Sign On Bonus for Qualified Candidates
** Jim Marsh Chrysler Jeep is looking for Chrysler Certified Master Technicians to join their industry leading Service Team! Enjoy excellent pay and performance incentives at a dealership where your skills will be recognized and rewarded! Dealership Benefits: Competitive wages Training Health, Dental, Vision, Life, Short and Long Term Disability Insurance 401k Paid time off Professional working environment Job Responsibilities: Perform work outlined on maintenance and repair orders to ensure customer satisfaction Diagnose the cause of any malfunction and repair in a timely manner Provide labor and time estimates for additional automotive repairs Able to explain mechanical problems and needed repairs to Service Advisors and vehicle owners in a non-technical manner Continuously learn new technical information and techniques in formal training sessions in order to stay in line with rapidly changing technology Job Requirements: 5+ years automotive technician experience Chrysler certification required Ability to diagnose and repair engine, transmission, electrical, steering, suspension, brakes, and AC systems Hold a valid driver’s license Apply Now!
**Sign On Bonus for Qualified Candidates
** Jim Marsh Chrysler Jeep is looking for Chrysler Certified Master Technicians to join their industry leading Service Team! Enjoy excellent pay and performance incentives at a dealership where your skills will be recognized and rewarded! Dealership Benefits: Competitive wages Training Health, Dental, Vision, Life, Short and Long Term Disability Insurance 401k Paid time off Professional working environment Job Responsibilities: Perform work outlined on maintenance and repair orders to ensure customer satisfaction Diagnose the cause of any malfunction and repair in a timely manner Provide labor and time estimates for additional automotive repairs Able to explain mechanical problems and needed repairs to Service Advisors and vehicle owners in a non-technical manner Continuously learn new technical information and techniques in formal training sessions in order to stay in line with rapidly changing technology Job Requirements: 5+ years automotive technician experience Chrysler certification required Ability to diagnose and repair engine, transmission, electrical, steering, suspension, brakes, and AC systems Hold a valid driver’s license Apply Now!
Not Specified
J
Software Engineer
🏢 JT4 LLC
Salary not disclosed
JT4, LLC provides engineering and technical support to multiple western test ranges for the U.S.
Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.
JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.
JOB SUMMARY -- ESSENTIAL FUNCTIONS/DUTIES A Software Engineer III performs a variety of engineering assignments in planning and overseeing research, design, development, manufacturing, testing, installation, integration, sustainment, operation, and maintenance of diverse software, electronic, and/or mechanical equipment and systems.
Plans, conducts, and technically implements software engineering projects or major phases of software engineering projects, coordinating the efforts of supporting staff in the performance of work.
This may include Project Management duties.
Leads software development, testing, deployment, integration, documentation, and maintenance in the support of customer requirements.
Employee will be responsible for the following functions/duties: Based on broad objectives from management and customers, independently analyzes, evaluates and integrates solutions to complex technical problems.
Encourages optimum design within customer specifications, quality standards, schedule, and funding limitations.
Assists in formulating engineering project requirements to meet the customer's needs and deadlines.
Develops detailed implementation plans to execute and meet project requirements.
Works closely with project management, hardware engineering, communications engineering, configuration management, quality assurance and operations support to ensure proper integration of software engineering with the other disciplines involved in the project.
Designs, implements, tests, and deploys software projects.
Provides technical guidance, mentoring, direction, and assistance to other engineering team members.
Reviews modifications to system software to ensure compatibility with existing hardware and software.
Ability to solicit and document detailed product requirements; writes technical data packages in support of software development or modifications.
Attends and facilitates meetings as required.
Perform other job-related duties, as required DESIRED QUALIFICATIONS Minimum of ten years work experience.
At least seven years of experience with computer programming using C, C++, and C#.
Ada, FORTRAN, and Assembly Language a plus.
Ability to program in C, C++, and C#.
Experience designing Windows and Linux applications and graphical user interfaces.
Experience with Web Applications and Services toolsets (Vue, React, Java, Java Script, XML, ASP).
Experience with database development (SQL Server, Oracle, Access).
Experience with Open Source software and systems, experience with Jenkins.
Experience with containerization, orchestration, and micro-services architecture, including Docker, Rancher, and Kubernetes.
Experience working with air-gapped networks.
Experience with Hyper-V and/or VMWare.
Knowledge and understanding of formal software development standards and software development processes to include the Software Capability Maturity Model.
Ability to deploy and troubleshoot network applications and systems.
Ability to assist/design in the architecture of new networks, submit requests for hardware/software, and employ it.
Ability to perform system administration activities in Windows and Linux operating system environments.
Sound understanding of network switches and routers.
Ability to effectively interact with system users.
Ability to analyze data, resolve problems, and make decisions independently.
Ability to communicate effectively in both oral and written form.
Ability to write and prepare a variety of technical and user-oriented reports, manual, and other types of written communications.
Ability to cross-collaborate with multiple stakeholders and groups to meet differing requirements.
Ability to establish and maintain effective work relationships with those contacted in the performance of this position.
Ability to travels as required by the company.
REQUIREMENTS -- EDUCATION, TECHNICAL, AND WORK EXPERIENCE A Bachelor's degree in Software Engineering, Computer Science, Electrical Engineering or an equivalent scientific or technical discipline from an ABET
- accredited academic institution and four-years of related engineering experience, or an accredited Masters of Science in engineering and a minimum of two years of related engineering experience, or an accredited doctorate degree in engineering are required for this position.
LICENSES OR CERTIFICATIONS Must obtain and maintain CompTIA Security + Certification.
Must possess a valid Nevada Driver's License.
Ability to obtain and maintain a Government Security Clearance.
SALARY The expected salary range for this position is $91,000 to $130,000 annually.
Note: The salary range offered for this position is a good faith description of the expected salary range this role will pay.
JT4, LLC considers factors such as (but not limited to) responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and business considerations when extending an offer.
BENEFITS Medical, Dental, Vision Insurance Benefits Active on Day 1 Life Insurance Health Savings Accounts/FSA's Disability Insurance Paid Time Off 401(k) Plan Options with Employer Match JT4 will match 50%, up to an 8% contribution 100% Immediate Vesting Tuition Reimbursement OTHER RESPONSIBILITIES Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job.
WORKING CONDITIONS Work is performed in a typical office environment with no unusual hazards.
Occasional lifting (up to 30 pounds), constant sitting while using the computer terminal, constant use of sight abilities while reviewing documents, constant use of speech/hearing abilities for communication, and constant mental alertness are required.
Travel to remote company work locations may be required.
DISCLAIMER The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.
Tasking is in support of a Federal Government Contract that requires U.S.
citizenship.
Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment.
SCC: JENG17; A2NTTR
Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.
JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.
JOB SUMMARY -- ESSENTIAL FUNCTIONS/DUTIES A Software Engineer III performs a variety of engineering assignments in planning and overseeing research, design, development, manufacturing, testing, installation, integration, sustainment, operation, and maintenance of diverse software, electronic, and/or mechanical equipment and systems.
Plans, conducts, and technically implements software engineering projects or major phases of software engineering projects, coordinating the efforts of supporting staff in the performance of work.
This may include Project Management duties.
Leads software development, testing, deployment, integration, documentation, and maintenance in the support of customer requirements.
Employee will be responsible for the following functions/duties: Based on broad objectives from management and customers, independently analyzes, evaluates and integrates solutions to complex technical problems.
Encourages optimum design within customer specifications, quality standards, schedule, and funding limitations.
Assists in formulating engineering project requirements to meet the customer's needs and deadlines.
Develops detailed implementation plans to execute and meet project requirements.
Works closely with project management, hardware engineering, communications engineering, configuration management, quality assurance and operations support to ensure proper integration of software engineering with the other disciplines involved in the project.
Designs, implements, tests, and deploys software projects.
Provides technical guidance, mentoring, direction, and assistance to other engineering team members.
Reviews modifications to system software to ensure compatibility with existing hardware and software.
Ability to solicit and document detailed product requirements; writes technical data packages in support of software development or modifications.
Attends and facilitates meetings as required.
Perform other job-related duties, as required DESIRED QUALIFICATIONS Minimum of ten years work experience.
At least seven years of experience with computer programming using C, C++, and C#.
Ada, FORTRAN, and Assembly Language a plus.
Ability to program in C, C++, and C#.
Experience designing Windows and Linux applications and graphical user interfaces.
Experience with Web Applications and Services toolsets (Vue, React, Java, Java Script, XML, ASP).
Experience with database development (SQL Server, Oracle, Access).
Experience with Open Source software and systems, experience with Jenkins.
Experience with containerization, orchestration, and micro-services architecture, including Docker, Rancher, and Kubernetes.
Experience working with air-gapped networks.
Experience with Hyper-V and/or VMWare.
Knowledge and understanding of formal software development standards and software development processes to include the Software Capability Maturity Model.
Ability to deploy and troubleshoot network applications and systems.
Ability to assist/design in the architecture of new networks, submit requests for hardware/software, and employ it.
Ability to perform system administration activities in Windows and Linux operating system environments.
Sound understanding of network switches and routers.
Ability to effectively interact with system users.
Ability to analyze data, resolve problems, and make decisions independently.
Ability to communicate effectively in both oral and written form.
Ability to write and prepare a variety of technical and user-oriented reports, manual, and other types of written communications.
Ability to cross-collaborate with multiple stakeholders and groups to meet differing requirements.
Ability to establish and maintain effective work relationships with those contacted in the performance of this position.
Ability to travels as required by the company.
REQUIREMENTS -- EDUCATION, TECHNICAL, AND WORK EXPERIENCE A Bachelor's degree in Software Engineering, Computer Science, Electrical Engineering or an equivalent scientific or technical discipline from an ABET
- accredited academic institution and four-years of related engineering experience, or an accredited Masters of Science in engineering and a minimum of two years of related engineering experience, or an accredited doctorate degree in engineering are required for this position.
LICENSES OR CERTIFICATIONS Must obtain and maintain CompTIA Security + Certification.
Must possess a valid Nevada Driver's License.
Ability to obtain and maintain a Government Security Clearance.
SALARY The expected salary range for this position is $91,000 to $130,000 annually.
Note: The salary range offered for this position is a good faith description of the expected salary range this role will pay.
JT4, LLC considers factors such as (but not limited to) responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and business considerations when extending an offer.
BENEFITS Medical, Dental, Vision Insurance Benefits Active on Day 1 Life Insurance Health Savings Accounts/FSA's Disability Insurance Paid Time Off 401(k) Plan Options with Employer Match JT4 will match 50%, up to an 8% contribution 100% Immediate Vesting Tuition Reimbursement OTHER RESPONSIBILITIES Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job.
WORKING CONDITIONS Work is performed in a typical office environment with no unusual hazards.
Occasional lifting (up to 30 pounds), constant sitting while using the computer terminal, constant use of sight abilities while reviewing documents, constant use of speech/hearing abilities for communication, and constant mental alertness are required.
Travel to remote company work locations may be required.
DISCLAIMER The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.
Tasking is in support of a Federal Government Contract that requires U.S.
citizenship.
Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment.
SCC: JENG17; A2NTTR
Not Specified
J
Engineer III - JSE Nellis AFB, NV
🏢 JT4 LLC
Salary not disclosed
JT4, LLC provides engineering and technical support to multiple western test ranges for the U.S.
Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.
JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.
JOB DUTIES
- ESSENTIAL FUNCTIONS An Engineer III performs a variety of engineering assignments in planning and overseeing research, design, development, manufacturing, testing, installation, integration, sustainment, operation, and maintenance of diverse software, electronic, and/or mechanical equipment and systems.
Employee will be responsible for the following functions/duties: Perform as a lead of a development, sustainment, or operations and maintenance team on more complex engineering assignments Independently perform a range of design, development, analysis, or review tasks under generally established project deadlines Complete design specifications, analyses, or design reviews for complex projects Generate complete design specifications for more complex projects Coordinate and work closely with other engineering, logistics, financial, and program management disciplines to define system specifications and requirements Verify and comply with engineering documentation standards and test procedures Prepare, deliver, and submit technical papers and perform engineering studies Support development of technical proposals and provide comments on the technical content and level of effort of the proposed scope of work Develop, maintain, and produce technical documentation and system/subsystem specifications Direct interface with customers at all levels from quotation to final design and test activities Acts as liaison for design reviews and technical working group meetings to comply with requirements and specifications Conduct site visits and experimental investigations and analyze engineering problems, propose solutions and alternatives, and provide recommendation Perform other job-related duties, as required RANGE POSITION DESCRIPTION Key Responsibilities: Provide simulation support for the Joint Simulation Environment project at Nellis AFB, building simulations to support USAF operational test and training missions.
Perform control room functions, including role-playing for constructive air assets, to support test and training exercises.
Assist in developing test planning, test conduct, test processes, test reports, operational procedures, data deliverables, and safety packages.
Simulation Support: Configure the battle space, perform post-test reconfigurations, and prepare the virtual environment with customer-defined threat laydowns.
Develop and implement threat configurations, System Under Test (SUT) configurations, and weapons configurations.
Operate and act as a flyer/operator within the simulation environment to support verification and validation.
Training and Mentorship: Instruct, mentor, and demonstrate to fellow flyers and engineers the threat system, operations, sensor systems, communication and navigation systems, and Pilot Vehicle Interface (PVI).
Modeling and Simulation: Provide modeling and simulation support for the development, upgrade, operations, and integration of constructive, real-time, and virtual piloted simulators.
Support the flying quality, airframe, propulsion, avionics, sensors, weapon, and electronic warfare mission areas.
Engineering Support: Provide operations engineering support for test planning working groups, design reviews, and other related testing activities. REQUIREMENTS
- EDUCATION, TECHNICAL, AND WORK EXPERIENCE A Bachelor of Science in Engineering from an ABET-accredited academic institution and four years of related engineering experience, or an accredited Master of Science in Engineering and a minimum of two years of related engineering experience, or an accredited doctorate degree in engineering are required for this position.
In addition, an Engineer III must possess the following qualifications: Mastery of concepts, principles, and practices of engineering that enable the employee to serve as a technical authority on projects relating to the specific programs Knowledge and skill sufficient to apply the latest developments in engineering to solve problems in the specialty area Working knowledge of computer systems and computer-based engineering tools Ability to investigate, troubleshoot, and design solutions to problems in operational hardware and software Excellent communication and analytical skills Planning/organizational skills and the ability to work under deadlines The incumbent must possess a valid, state issued driver's license.
The Operations/Test Analyst must be able to obtain and maintain a DoD security clearance up to top secret with special access.
Must be a U.S.
citizen.
BENEFITS Medical, Dental, Vision Insurance
**Benefits Active on Day 1 Life Insurance Health Savings Accounts/FSA's Disability Insurance Paid Time Off 401(k) Plan Options with Employer Match JT4 will match 50%, up to an 8% contribution 100% Immediate Vesting Tuition Reimbursement OTHER RESPONSIBILITIES Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job.
WORKING CONDITIONS Work is performed in a typical office environment with no unusual hazards.
There is occasional lifting up to 20 pounds, constant sitting while using the computer terminal, constant use of sight abilities while reviewing documents, constant use of speech/hearing abilities for communication, and constant mental alertness.
The incumbent must possess planning/organizing skills and must be able to work under deadlines.
DISCLAIMER The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.
Tasking is in support of a Federal Government Contract that requires U.S.
citizenship.
Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license or other licenses/certifications, and the inability to obtain and maintain the required clearance, license or certification may affect an employee's ability to maintain employment.
SCC: JENG17; A1412TW
Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.
JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.
JOB DUTIES
- ESSENTIAL FUNCTIONS An Engineer III performs a variety of engineering assignments in planning and overseeing research, design, development, manufacturing, testing, installation, integration, sustainment, operation, and maintenance of diverse software, electronic, and/or mechanical equipment and systems.
Employee will be responsible for the following functions/duties: Perform as a lead of a development, sustainment, or operations and maintenance team on more complex engineering assignments Independently perform a range of design, development, analysis, or review tasks under generally established project deadlines Complete design specifications, analyses, or design reviews for complex projects Generate complete design specifications for more complex projects Coordinate and work closely with other engineering, logistics, financial, and program management disciplines to define system specifications and requirements Verify and comply with engineering documentation standards and test procedures Prepare, deliver, and submit technical papers and perform engineering studies Support development of technical proposals and provide comments on the technical content and level of effort of the proposed scope of work Develop, maintain, and produce technical documentation and system/subsystem specifications Direct interface with customers at all levels from quotation to final design and test activities Acts as liaison for design reviews and technical working group meetings to comply with requirements and specifications Conduct site visits and experimental investigations and analyze engineering problems, propose solutions and alternatives, and provide recommendation Perform other job-related duties, as required RANGE POSITION DESCRIPTION Key Responsibilities: Provide simulation support for the Joint Simulation Environment project at Nellis AFB, building simulations to support USAF operational test and training missions.
Perform control room functions, including role-playing for constructive air assets, to support test and training exercises.
Assist in developing test planning, test conduct, test processes, test reports, operational procedures, data deliverables, and safety packages.
Simulation Support: Configure the battle space, perform post-test reconfigurations, and prepare the virtual environment with customer-defined threat laydowns.
Develop and implement threat configurations, System Under Test (SUT) configurations, and weapons configurations.
Operate and act as a flyer/operator within the simulation environment to support verification and validation.
Training and Mentorship: Instruct, mentor, and demonstrate to fellow flyers and engineers the threat system, operations, sensor systems, communication and navigation systems, and Pilot Vehicle Interface (PVI).
Modeling and Simulation: Provide modeling and simulation support for the development, upgrade, operations, and integration of constructive, real-time, and virtual piloted simulators.
Support the flying quality, airframe, propulsion, avionics, sensors, weapon, and electronic warfare mission areas.
Engineering Support: Provide operations engineering support for test planning working groups, design reviews, and other related testing activities. REQUIREMENTS
- EDUCATION, TECHNICAL, AND WORK EXPERIENCE A Bachelor of Science in Engineering from an ABET-accredited academic institution and four years of related engineering experience, or an accredited Master of Science in Engineering and a minimum of two years of related engineering experience, or an accredited doctorate degree in engineering are required for this position.
In addition, an Engineer III must possess the following qualifications: Mastery of concepts, principles, and practices of engineering that enable the employee to serve as a technical authority on projects relating to the specific programs Knowledge and skill sufficient to apply the latest developments in engineering to solve problems in the specialty area Working knowledge of computer systems and computer-based engineering tools Ability to investigate, troubleshoot, and design solutions to problems in operational hardware and software Excellent communication and analytical skills Planning/organizational skills and the ability to work under deadlines The incumbent must possess a valid, state issued driver's license.
The Operations/Test Analyst must be able to obtain and maintain a DoD security clearance up to top secret with special access.
Must be a U.S.
citizen.
BENEFITS Medical, Dental, Vision Insurance
**Benefits Active on Day 1 Life Insurance Health Savings Accounts/FSA's Disability Insurance Paid Time Off 401(k) Plan Options with Employer Match JT4 will match 50%, up to an 8% contribution 100% Immediate Vesting Tuition Reimbursement OTHER RESPONSIBILITIES Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job.
WORKING CONDITIONS Work is performed in a typical office environment with no unusual hazards.
There is occasional lifting up to 20 pounds, constant sitting while using the computer terminal, constant use of sight abilities while reviewing documents, constant use of speech/hearing abilities for communication, and constant mental alertness.
The incumbent must possess planning/organizing skills and must be able to work under deadlines.
DISCLAIMER The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.
Tasking is in support of a Federal Government Contract that requires U.S.
citizenship.
Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license or other licenses/certifications, and the inability to obtain and maintain the required clearance, license or certification may affect an employee's ability to maintain employment.
SCC: JENG17; A1412TW
Not Specified
U
Instructor Pool - Online Data Analytics, Data Science, Software Development, andCybersecurity Programs - UC Berkeley Extension
✦ New
Salary not disclosed
Position overview
Position title:
Instructor (Non-Senate, Non-Tenure Track)
Salary range:
The compensation model varies depending upon the course delivery format. For a synchronous Live Online course, a reasonable estimate for this position is $3,000 -$4,000 total per course. For an asynchronous Start Anytime Online course, this position is paid $165 per final student course grade submitted each month; a reasonable estimate ranges from $660 - $21,285 total per course; and monthly payments typically begin within 6 months after the course start date. Instructor compensation is determined by course length, number of units, enrollment, budgetary considerations, and other factors.
Percent time:
Part-time by agreement on a course-by-course basis.
Anticipated start:
Some appointments may begin as early as the spring semester.
Review timeline:
Applicants are considered for positions as needs arise; the existence of this applicant pool does not guarantee that a position is available. The applicant pool will remain in place for 9-12 months; those interested in remaining in the applicant pool beyond the advertised final closing date must reapply.
Position duration:
Length of courses differs depending on the subject, level, format/schedule, and credits taught. For the fall, spring, and summer semesters, course length typically ranges from approximately 10 to 12 weeks. For asynchronous online start anytime courses, agreement length typically ranges from 9 to 18 months. Further course agreements may be assigned based upon program needs, meritorious performance, and funding availability.
Application Window
Position description
Course Subjects
General Duties
U.S.A. Residency and U.S.A. Work Authorization
Qualifications
Basic qualifications (required at time of application)
Additional qualifications (required at time of start)
Preferred qualifications
Application Requirements
Document requirements
Reference requirements
Apply link:
JPF05017
About UC Berkeley
Job location
San Francisco Bay Area, California, U.S.A.
Remote working/work at home options are available for this role.
Position title:
Instructor (Non-Senate, Non-Tenure Track)
Salary range:
The compensation model varies depending upon the course delivery format. For a synchronous Live Online course, a reasonable estimate for this position is $3,000 -$4,000 total per course. For an asynchronous Start Anytime Online course, this position is paid $165 per final student course grade submitted each month; a reasonable estimate ranges from $660 - $21,285 total per course; and monthly payments typically begin within 6 months after the course start date. Instructor compensation is determined by course length, number of units, enrollment, budgetary considerations, and other factors.
Percent time:
Part-time by agreement on a course-by-course basis.
Anticipated start:
Some appointments may begin as early as the spring semester.
Review timeline:
Applicants are considered for positions as needs arise; the existence of this applicant pool does not guarantee that a position is available. The applicant pool will remain in place for 9-12 months; those interested in remaining in the applicant pool beyond the advertised final closing date must reapply.
Position duration:
Length of courses differs depending on the subject, level, format/schedule, and credits taught. For the fall, spring, and summer semesters, course length typically ranges from approximately 10 to 12 weeks. For asynchronous online start anytime courses, agreement length typically ranges from 9 to 18 months. Further course agreements may be assigned based upon program needs, meritorious performance, and funding availability.
Application Window
Open date: November 21, 2025
Next review date: Monday, Mar 16, 2026 at 11:59pm (Pacific Time)
Apply by this date to ensure full consideration by the committee.
Final date: Friday, Nov 20, 2026 at 11:59pm (Pacific Time)
Applications will continue to be accepted until this date, but those received after the review date will only be considered if the position has not yet been filled.
Position description
UC Berkeley Extension (UNEX), the continuing education branch of the University of California, Berkeley, has been building bridges between UC Berkeley and the public since 1891. UNEX serves the professional and continuing education goals of thousands of people each year and plays an essential part of the University mission to: extend the research and scholarship of UC Berkeley to a global community; increase access to higher education for non-traditional, online, and international students; and improve the workforce. UC Berkeley Extension is a part of the division under the leadership of the Dean of Extended Education that also includes Berkeley Summer Sessions, Berkeley Study Abroad, and Osher Lifelong Learning Institute.
UC Berkeley Extension invites applications for a pool of qualified, dynamic instructors with a commitment to professional and continuing education in Data Analytics, Data Science, Software Development, and Cybersecurity to teach one or more online courses each year for our Engineering, Technology, and Environmental Management department.
Courses are offered online:
- Online instruction is delivered asynchronously through our learning management system (Canvas) or through synchronous live lectures (Zoom).
- Most synchronous live online lecture courses are offered in the evening and on the weekend (U.S.A. Pacific Time).
Course Subjects
We are seeking qualified applicants who possess current subject matter expertise and/or teaching knowledge in (but not limited to) the following course subjects. For program and course descriptions, please refer to the departmental link below.
Data Analytics and Data Science
- Introduction to SQL
- Introduction to Databases
- Data Warehousing and Business Intelligence
- Data Visualization
- Introduction to Data Analytics
- Python for Data Analysis
- R for Data Analysis
- Data Analytics Capstone
- Introduction to Big Data
- Introduction to Data Science
- Introduction to Machine Learning Using Python
- Machine Learning and Deep Learning
- Artificial Intelligence Foundations
- Data Science Capstone
Software Development and Advanced Software Development
- Introduction to C Language Programming
- C++ Programming
- First Course in Java
- Programming Python
- Data Structures and Algorithms
- Front-End Web Development
- JavaScript Frameworks
- Modern Web Applications and Cloud Computing
- Software Design Patterns
- Software Quality Assurance
- Software Development Capstone
- Java: Discovering Its Power
- Mastering Python
- Back-End Development with Java/Python
- Web Software Security Frameworks
- Advanced Databases
- Advanced Software Development Capstone
Cybersecurity
- Advanced Network Cybersecurity and AI Monitoring
- Cybersecurity AI Risk Management and Governance
- Automated Cybersecurity Incident Response and Digital Forensics
- Advanced Topics in AI Cybersecurity and Capstone
Other Data, Programming, Software Development, or Cybersecurity Courses or Subjects
(please specify in your cover letter)
General Duties
The department seeks candidates who can support the success of all students through inclusive curriculum, classroom environment, and pedagogy. Specific duties and expectations will vary depending on the method of instruction including: Synchronous Live Online (Zoom); or Asynchronous Online (Start Anytime).
- For synchronous instruction (live online courses), duties include but are not limited to: syllabus development; assignment development; lesson planning for class meetings; preparing and submitting required texts and course materials; reviewing and updating Canvas course site; and delivering lectures, presentations, and learning activities for all required hours of instruction.
- For asynchronous instruction (start anytime online courses), duties include but are not limited to: reviewing the syllabus and pre-populated online course content; learning and utilizing Canvas classroom management tools; and requesting any training needs from the Program Director or Department Director.
- For all instruction (regardless of course format) duties include but are not limited to: completing required trainings as mandated by the UC Presidential policies; responding to student questions and learning needs in a timely manner; grading student assignments and posting final student grades to the instructor portal in a timely manner; utilizing University-approved course support platforms including the Canvas Learning Management System, Zoom, Instructor Portal, Google Workspace, etc.; reviewing and following University and departmental policies, logistics, and other guidelines as published on the departmental Instructional Resource Site; and responding to other requests from the Program Director or Department Director in a timely manner.
U.S.A. Residency and U.S.A. Work Authorization
- All work must be performed in the United States, whether in person or online. Applicants must be authorized to work in the United States at the time of hire. Visa sponsorship is not available for this position.
Data Analytics, Data Science, Software Development, and Cybersecurity Programs: academic-areas/technology-and-information-management/#!?tab=programs&availability=all
Data Analytics, Data Science, Software Development, and Cybersecurity Programs: academic-areas/technology-and-information-management/#!?tab=courses
Qualifications
Basic qualifications (required at time of application)
- Bachelor's degree or equivalent international degree required.
Additional qualifications (required at time of start)
- 5 or more years of professional industry work experience since degree.
Preferred qualifications
- 6 or more years of professional industry work experience in the course subject.
- Advanced degree in course subject preferred.
- Teaching, training or coaching experience in the course subject, within a U.S. corporate environment, or at a U.S. college/university institution.
- Experience in creating syllabi, learning objectives, lectures/presentations, learning activities, assignments, assessments, exams, and quizzes.
- Experience teaching online and/or developing academic content for online courses.
- Ability to convey conceptual and complex ideas and information.
- Ability to support the success of all students through inclusive curriculum, classroom environment, and pedagogy.
- Effective verbal/written communication and presentation skills (English).
- Effective organizational skills with attention to detail.
- Ability to collaborate with colleagues and work within a team environment.
- Proficiency in (or willingness to learn) instructional and other technology, such as: Learning Management Systems (Canvas); lecture/presentation capture applications (Panopto); online video conferencing (Zoom); Microsoft Office (Word and PowerPoint); file sharing (Google drive or Dropbox); and Google Workspace tools (email, calendar, docs, sheets, slides, etc).
Application Requirements
Document requirements
Curriculum Vitae or Resume - Your most recently updated C.V. or resume.
Cover Letter - Please discuss prior teaching experience, teaching approach, and other/future teaching interests. This can include, for example, specific efforts, accomplishments, and future plans to support the success of all students through inclusive curriculum, classroom environment, and pedagogy.
(Optional)Sample Syllabi and/or Teaching Evaluations (Optional)
Reference requirements
- References are requested from candidates at the interviewing stage, and references are only contacted for finalists.
Apply link:
JPF05017
Help contact:
About UC Berkeley
UC Berkeley is committed to diversity, equity, inclusion, and belonging in our public mission of research, teaching, and service, consistent with UC Regents Policy 4400 and University of California Academic Personnel policy (APM 210 1-d). These values are embedded in our Principles of Community, which reflect our passion for critical inquiry, debate, discovery and innovation, and our deep commitment to contributing to a better world. Every member of the UC Berkeley community has a role in sustaining a safe, caring and humane environment in which these values can thrive.
The University of California, Berkeley is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or protected veteran status.
For more information, please refer to the University of California's Affirmative Action and Nondiscrimination in Employment Policy and the University of California's Anti-Discrimination Policy.
In searches when letters of reference are required all letters will be treated as confidential per University of California policy and California state law. Please refer potential referees, including when letters are provided via a third party (i.e., dossier service or career center), to the UC Berkeley statement of confidentiality prior to submitting their letter.
As a University employee, you will be required to comply with all applicable University policies and/or collective bargaining agreements, as may be amended from time to time. Federal, state, or local government directives may impose additional requirements.
Unless stated otherwise, unambiguously, in the position description, this position does not include sponsorship of a new consular H-1B visa petition that would require payment of the $100,000 supplemental fee.
As a condition of employment, the finalist will be required to disclose if they are subject to any final administrative or judicial decisions within the last seven years determining that they committed any misconduct.
- "Misconduct" means any violation of the policies or laws governing conduct at the applicant's previous place of employment, including, but not limited to, violations of policies or laws prohibiting sexual harassment, sexual assault, or other forms of harassment or discrimination, as defined by the employer.
- UC Sexual Violence and Sexual Harassment Policy
- UC Anti-Discrimination Policy
- APM - 035: Affirmative Action and Nondiscrimination in Employment
Job location
San Francisco Bay Area, California, U.S.A.
Remote working/work at home options are available for this role.
Not Specified
D
Structural Engineer
✦ New
Salary not disclosed
WHO WE ARE
Delta Engineers, Architects, & Surveyors (Delta) is a multidisciplinary AEC firm founded in upstate New York in 1976. Along with our corporate headquarters located near the intersection of Interstates 81, 86 and 88, Delta has additional offices across Central New York and Chevy Chase, MD, together with remote team members located across the US. We deliver engineering and architectural design services for multiple market sectors along with providing environmental, survey, landscape architecture, and ecological services to public and private clients located throughout the continental US. Delta team members take advantage of terrific opportunities to advance professionally in a supportive team-oriented culture while enjoying generous compensation and benefits package.
WHO WE NEED
We are seeking a versatile and team-oriented Structural Project Engineer in our Structural Team, ideally located in the Syracuse or Albany, NY area, or at our Endwell, NY office. Candidates located outside the designated office locations may qualify for full remote work, subject to company policy. The ideal candidate should have a Bachelor's Degree in Civil / Structural Engineering, with a minimum of 6 years of relevant experience. A PE is also required. Experience should include structural analysis, design, and detailing for concrete, steel, and aluminum structures. Experience with cable design is preferred.
The primary duties associated with this position include:
- The candidate should be proficient with the International Building Code (IBC); ASCE-7; ACI 318; ADM-2020; and AISC.
- Performing challenging 3-dimensional structural analyses and designs for a wide variety of clients using various state-of-the-art design software, including RISA 3D, SAP, RAM, and RISA Foundation.
- Responsible for serving as lead project engineer, i.e., taking responsibility for developing design, preparing detailed structural drawings using AutoCAD and REVIT, and specifications. This includes coordinating the work of junior team members and amongst other trades.
- Solving engineering problems using experience, judgment, and education and knowing when to ask for assistance when required.
- Write and review related reports for the services provided.
- Scoping projects and assisting project managers with proposal creation.
- Serving as a Quality Control reviewer for the designs of team members.
- Assisting the Team Leader in initiating, developing, and implementing continuous team improvement initiatives.
- Supporting structural work in our building projects within the Structural Facilities Group as workload warrants.
- Attending client meetings/presentations in the daytime or evenings.
- Communicating with client representatives, contractors, and suppliers.
- Participating in site visits/inspections/documentation during construction.
- Work on a variety of projects including schools, industrial facilities, commercial buildings, and governmental projects.
- This position requires an individual that has strong technical abilities with good organizational and communication skills, and the ability to work in a fast-paced market.
Additional duties will include preparing structural designs; prepare structural design summaries and detailed drawings using AutoCAD and REVIT; consider alternate designs and value engineering; and meeting scheduled project deadlines.
Delta is driven to exceed our clients' expectations on every project. Accordingly, the successful applicant for this position must be willing to occasionally work adjusted hours/overtime.
WHAT WE OFFER
Hiring Salary Range: $80,000-$110,000 (Salary to be determined by the applicant's education, experience, knowledge, skills, and abilities along with an internal equity and alignment with market area data.)
The following are a few of the benefits that we offer:
- Paid Holidays, Vacation, Sick time
- Health and Dental Insurance
- Optional Vision, LTD and Term Life Insurance
- Enhanced Short Term Disability
- 401K Retirement Plan
- Tuition Assistance Program
- Professional Licensing Reimbursement
- Recruitment Bonus Program
We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.
Remote working/work at home options are available for this role.
Not Specified
C
Senior Java/Kotlin engineer - Remote
✦ New
Salary not disclosed
Senior Java/Kotlin engineer
Remote
6+ Month Contract: $70-$80 per hour
Our client is in search of a Senior Java Engineer for a 6+ month contract. You will lead the development and testing of our systems and services Participate in shaping the technical architecture of the product Help translate product requirements into user stories and technical solutions Deliver highly available and scalable services in a production environment Mentor other engineers, support the technical culture, and help grow the team Generate ideas for new initiatives and technologies Communicate with project leads, product managers and other software developers
- Systems Development: Lead and participate in the development and testing of our systems and services.
- Requirement Translation: Help translate product requirements into user stories and actionable technical solutions.
- Production Delivery: Deliver highly available and scalable services in a production environment.
- Cross-Functional Collaboration: Communicate effectively with project leads, product managers, and other software developers.
- Education: Bachelor's Degree in Computer Science or a related field.
- Experience: 4+ years of programming experience, ideally using a modern stack.
- Backend Expertise: 2+ years of experience with Java or Kotlin.
- Core Stack Knowledge: Familiarity with our environment ( Java/Kotlin, Spring, PostgreSQL, React) running on Kubernetes within a service-oriented architecture (100+ services).
- Database Proficiency: A solid understanding of relational databases and ORMs.
- Architecture: Experience working on SOA or microservice-based applications.
- Quality Standards: View Unit and Integration tests as first-class citizens in the software development lifecycle.
- Collaborative Workflow: Experience refining designs, performing code reviews, and managing pull requests in a team environment.
- Ownership & Mindset: * A solid sense of responsibility and the ability to drive projects from inception to completion
- Full-Stack Experience: Additional expertise in any of the following areas:
- Systems: Kafka, Temporal, Docker, POSIX.
- Databases: Deep PostgreSQL knowledge.
- Front-End: JavaScript/TypeScript, React.
Bonus Skills
Banking or finance experience Experience scaling highly available, mission critical systems Full-stack experience, either toward systems (kafka, temporal, docker), databases (DynamoDB), or front-end (javascript/typescript, react).
Welcome to ConsultNet, a premier national provider of technology talent and solutions. Our expertise spans across project services, contract-to-hire, direct search, and managed services onshore, nearshore, and hybrid. For over 25 years, we have connected thousands of consultants with meaningful roles through a personal, communication-driven approach, partnering with a diverse client base to build high-performing teams and create lasting impact. Our comprehensive service offerings cover a wide range of technology and engineering positions across key markets nationwide. Learn more at .
We champion equality and inclusivity, proudly supporting an Equal Opportunity Employer policy. We welcome applicants regardless of Race, Color, Religion, Sex, Sexual Orientation, Gender Identity, National Origin, Age, Genetic Information, Disability, Protected Veteran Status, or any other status protected by law.
Remote working/work at home options are available for this role.
Not Specified
Senior Databricks AI/ML Engineer
✦ New 🏢 LHH
Salary not disclosed
LHH is seeking a Senior Databricks AI/ML Engineer to join our client's team in a fully remote role based in Seattle, WA. Candidates must live in one of the following states, and be prepared to pass a background check/identity verification process: WA, OR, ID, OH, SC, NC, TX, or FL
LHH has a dynamic and challenging opportunity for a Senior Databricks AI/ML Engineer to join our client's engineering team. This role focuses on building and deploying scalable AI/ML solutions across key areas of the insurance functions, including underwriting, claims, pricing, customer engagement, and fraud detection, with a strong emphasis on Databricks architecture and ecosystem integration. The engineer will collaborate closely with data scientists, actuaries, product owners, and engineers to operationalize models, transforming them into robust, production-grade systems seamlessly integrated into business workflows and enterprise platforms.
Salary & Benefits:
- $150k to $185k annually (depending on location & experience)
- Medical, dental, and vision insurance
- 401(k) plan with employer match
- Vacation time accrues at a rate of 10 days annually, with increases based on a tenure schedule, up to a maximum of 25 days per year.
- PTO included Four (4) personal days are granted immediately upon hire.
- Paid holidays are provided for the eight (8) holidays observed in this role throughout the calendar year.
- Up to ten (10) days of sick leave are granted immediately upon hire (pro-rated based on hire date and full-time/part-time status).
- Additional paid time off is available for bereavement, jury duty, and employee volunteer activities in the community.
- Life and disability insurance
Minimum Qualifications:
- Bachelor's degree in Computer Science, AI/ML, Data Science/Engineering, or related field (or equivalent experience).
- 6+ years experience in ETL pipelines, SQL Server, and production data workflows.
- 3+ years enterprise experience with Azure & Databricks AI/ML, including data analysis and visual analytics.
- 3+ years applying ML algorithms and transforming data science prototypes into production.
- 5+ years experience with CI/CD workflows for ML models and related code.
- Strong SQL, real-time and batch data pipeline development, and unsupervised learning techniques.
- Familiarity with agile methodologies (e.g., Scrum).
Responsibilities:
- Conduct customer workshops to gather requirements and design analytics architectures using Azure and Databricks AI/ML.
- Serve as Databricks Architect, managing workspace design, deployment, and governance across environments.
- Define and implement Databricks Lakehouse architecture and governance best practices.
- Integrate Databricks with Azure services and lead implementation of Databricks SQL, Delta Live Tables, and MLflow.
- Develop and maintain automated MLOps workflows for model deployment, monitoring, and lifecycle management.
- Set up and configure Azure and Databricks infrastructure for AI/ML workloads.
- Review ML model code and analytics scripts for quality and performance.
- Design and build data pipelines and cloud services for monitoring, analysis, and reporting.
- Develop robust ETL workflows using Databricks, Spark, and SQL Server for structured and unstructured data.
- Provide production support and performance tuning for data engineering workflows.
- Optimize complex SQL queries and stored procedures for data processing and business logic.
- Collaborate with cross-functional teams to ensure data quality and support business decision-making.
- Scale and deploy machine learning models to handle large-scale data.
- Feed raw data into models and build deployment pipelines for new models.
- Implement logging, observability, and performance monitoring for AI/ML systems.
- Conduct architecture reviews and performance testing.
- Perform other duties as assigned.
Preferred Qualifications:
- Master's degree in a related field.
- Experience in the insurance industry (Auto, Home, Umbrella) and related AI/ML applications.
- Proficiency with tools/platforms: Azure ML, Databricks, Microsoft Fabric, Synapse, Power BI, Snowflake, and APIs like Azure OpenAI and Cognitive Services.
- Knowledge of streaming frameworks: Apache Kafka, Azure Event Hubs, Delta Live Tables.
- Strong math, problem-solving, and rapid learning skills.
- Excellent communication, organization, and independent work capabilities.
- Service-oriented mindset with ability to handle ambiguity and build strong relationships.
Equal Opportunity Employer/Veterans/Disabled
To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable:
• The California Fair Chance Act
• Los Angeles City Fair Chance Ordinance
• Los Angeles County Fair Chance Ordinance for Employers
• San Francisco Fair Chance Ordinance
Remote working/work at home options are available for this role.
Not Specified
Communications Project Manager
✦ New
Salary not disclosed
Our biotech client is seeking a Communications Project Manager to support Corporate Communications and R&D Communications in a part-time freelance capacity.
This is an ongoing 20 hours/week role with an expected duration of 6 months, with potential to extend. This position is fully remote and you will be reporting directly to the VP, Enterprise Communications.
The Communications Project Manager will serve as an operational and organizational engine for two fast-moving communications teams. This role ensures projects progress on schedule, leadership receives accurate and timely reporting, and executive-ready materials are consistently delivered. The ideal candidate is proactive, highly organized, experienced in cross-functional communications, and comfortable working directly with senior leaders.
Responsibilities
- Compile weekly project updates for the VP to support executive staff meeting discussions.
- Prepare and maintain monthly team reports for Corporate Communications and R&D Communications.
- Build quarterly business reviews (QBRs), consolidating inputs from multiple workstreams into executive-ready presentations.
- Create and update executive briefing books (1-2 per week), synthesizing complex information into clear, strategic narratives.
- Attend weekly team meetings (Wednesdays at 10 AM PST and Thursdays at 11 AM PST), maintaining agendas, tracking follow-ups, and ensuring all commitments are completed.
- Coordinate project inputs across cross-functional partners; track progress, identify risks, and flag blockers.
- Gather updates from stakeholders and ensure completeness, clarity, and alignment to team priorities.
- Synthesize themes across projects to identify patterns, insights, and strategic throughlines for reporting.
- Prepare materials in polished, executive-ready formats.
- Maintain project trackers, shared documents, and operational workflows across Airtable, OneNote, and Teams.
- Support the operational organization of both communications teams as they undergo structural changes, helping maintain consistency, accountability, and predictable information flow.
Requirements
- Minimum of 3 years of experience in project management, communications, executive support, or similar roles
- Experience supporting executive communications or communications teams.
- Strong organizational skills with demonstrated success managing multiple deadlines and stakeholder inputs.
- Proactive, self-starting working style with a Type A attention to detail.
- Exceptional written communication skills and comfort preparing executive-level materials.
- Ability to confidently engage senior leaders to request updates, clarify details, and push for high quality inputs.
- Comfortable synthesizing information and identifying key themes, insights, and priorities.
- Strong collaboration skills and a personable, professional presence.
Software Required:
- Airtable
- Workfront
- PowerPoint
- OneNote
In this position, you may have access to client or customer systems, confidential and/or proprietary information or data, including medical data.
Benefits
Creative Circle's Freelance Employee benefits package includes eligibility for Minimum Essential Coverage (MEC) medical plan, dental/vision/term life package, discount prescription program, critical illness, accident, tele-behavioral health, and 401(k) plan. Sick leave is provided to Candidates whose assignment work location is in a state or city subject to sick leave laws. A Minimum Value (MV) PPO medical plan, Employee Stock Purchase Plan, and paid holiday eligibility are based on length and dates of service.Email Your Resume In Word To
Looking forward to receiving your resume through our website and going over the position with you. Clicking apply is the best way to apply.
Please do NOT change the email subject line in any way. You must keep the JobID: linkedin : AG24-1980766 -- in the email subject line for your application to be considered.
Allie Gribble - Senior Solutions Delivery Recruiter
For Creative Circle to represent you for this opportunity, you must be currently authorized to work in the United States without the need of employer sponsorship for a non-immigrant visa such as a H-1B, TN, or O visa. We do not support or provide training for STEM/OPT programs. Additionally, you must be physically located in and perform the work for our client in the United is a new role.
This job was first posted by Creative Circle on 03/16/2026 and applications will be accepted on an ongoing basis until the position is filled or closed.
This job was posted on 03/16/2026 and is open for 60 days
Creative Circle is an Equal Opportunity Employer
All qualified applicants will receive consideration for employment without regard to race, color, creed, religion, sex (including pregnancy, childbirth, breastfeeding, or related medical conditions), age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, disability, status as a crime victim, protected veteran status, or any other characteristic protected by law. Our hiring process includes AI screening for keywords and minimum qualifications. Recruiters review all results. Creative Circle will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. If you need a reasonable accommodation in the application process, please contact your Recruiter (the person you'll be interviewing with) or a member of our Human Resources team to make arrangements. United Healthcare creates and publishes the Transparency in Coverage Machine-Readable Files on behalf of Creative Circle.
Copyright 1999 - 2026. CreativeCircle , Inc. All rights reserved.
Remote working/work at home options are available for this role.
Not Specified
jobs by
✓ All jobs loaded