Engineering Jobs in Westmont Illinois

-Lead regional sourcing activities for new products from concept through launch and ramp-up.

-Engage regional and global suppliers early in the design phase to support DFM, DFC, and supplier-led innovation.

-Support regional sourcing strategy delivery aligned with global category strategies and NPI program requirements.

-Ensure supplier readiness for prototype, pilot, and production ramp within the region.

-In coordination with NA Sourcing Lead, develop and execute regional sourcing strategies aligned with cost, risk, capacity, localization, and sustainability goals.

-Lead regional supply base development to support new technologies, growth, and localization initiatives.

-Drive regional sourcing decisions while ensuring alignment with global sourcing governance.

-Optimize regional footprint through make/buy, nearshore/reshore, and dual-source strategies.

-Monitor regional market trends, labor, logistics, geopolitical risks, and cost drivers.

-Identify, qualify, and onboard regional suppliers to support NPI and long-term business needs.

-Lead RFQs/RFPs, supplier selection, negotiations, and contracting within the region.

-Partner with Quality and Engineering on supplier qualification, PPAP/FAI, audits, and capability assessments.

-Drive supplier performance, capacity planning, and continuous improvement for launch-critical components.

-Own regional piece-price, tooling, and total cost of ownership (TCO) for NPI components.

-Develop should-cost models and regional cost benchmarks.

-Support regional business cases, capital investments, and executive sourcing reviews.

-Deliver cost, margin, and productivity targets while supporting aggressive NPI timelines.

-Serve as the regional sourcing lead on global NPI project teams.

-Align regional sourcing milestones with product development stage-gate processes.

-Coordinate with global category teams to ensure consistency and leverage.

-Lead transition from NPI to sustaining sourcing within the region.

-Identify regional supply risks related to new suppliers, capacity, logistics, and compliance.

-Develop contingency plans, dual sourcing strategies, and launch readiness plans.

-Ensure compliance with regional regulatory, trade, ESG, and ethical sourcing requirements

Qualifications:

-Degree – Engineering, Supply Chain, Business, etc..

-5+ years of professional working experience within a manufacturing/assembly based setting

-Experience working within a new product development, new product introduction, R&D or prototyping based setting

-Experience with strategic sourcing deployment

-Ability to manage a project from concept through to completion for a new supplier/part

Client Overview:

With one of the industry's best reputations and a consistent pipeline of projects across Chicago, this General Contractor is looking for a Senior Project Manager with 7-20 years of experience as they continue to expand in '26.

Key Responsibilities

• Lead the planning, execution, and delivery of construction projects valued up to $10M+.
• Manage projects from preconstruction through project closeout, ensuring schedule, budget, and quality objectives are achieved.
• Oversee project teams including project managers, project engineers, superintendents, and subcontractors.
• Coordinate closely with architectural and engineering teams within the integrated AEC environment.
• Manage project financials including budgets, forecasting, cost control, and change management.
• Maintain strong client relationships and serve as the primary point of contact throughout the project lifecycle.
• Lead project meetings, reporting, and communication with internal and external stakeholders.
• Ensure compliance with safety standards, contractual requirements, and company procedures.

Qualifications

• 10+ years of construction project management experience.
• Proven experience delivering complex projects.
• Strong leadership and team management capabilities.
• Ability to oversee project financials, schedules, and client relationships.
• Excellent communication and stakeholder coordination skills.
• Bachelor's degree in Construction Management, Engineering, Architecture, or related field preferred.

Job Offer:

• $135,000 - $175,000 salary
• Yearly bonus
• Monthly truck allowance or company vehicle
• Gas gard
• BCBS Healthcare package – cost covered 80% for the employee and family
• 401K company match
• Laptop & company cell phone
• PTO, Sick Days & Floating Days
• Projects only in Chicago – circa 40 miles of downtown
• Commuter benefits

Director of Manufacturing Operations

Location: Hybrid / On-site (as required)

Reports to: COO

The Director of Manufacturing Operations is responsible for end-to-end manufacturing execution and scale for DeNova Detect’s life-safety product portfolio. This role ensures that products are built safely, on time, on cost, and in compliance, while building a resilient manufacturing ecosystem capable of supporting rapid growth across retail, commercial, utility, and legislative-driven demand.

This leader serves as the operational bridge between engineering, supply chain, quality, regulatory, and commercial teams, translating product strategy into reliable, scalable production.

Core Responsibilities

Manufacturing & Production Leadership

• Own global manufacturing strategy across internal and contract manufacturing partners
• Establish and manage production plans aligned with sales forecasts and launch timelines
• Ensure consistent achievement of cost, quality, delivery, and yield targets
• Lead capacity planning to support demand surges driven by retail promotions, legislation, or national media exposure
• Drive continuous improvement using Lean, Six Sigma, or similar methodologies

Contract Manufacturer & Supplier Management

• Select, onboard, and manage contract manufacturers (CMs) and key component suppliers
• Negotiate manufacturing agreements, pricing, lead times, and service-level expectations
• Implement performance scorecards for CMs and suppliers (OTIF, quality, cost, responsiveness)
• Conduct regular audits and business reviews to ensure compliance and risk mitigation

Quality, Compliance & Regulatory Readiness

• Ensure manufacturing processes comply with all applicable standards and certifications, including:
• UL /ETL (as applicable)
• State and federal life-safety regulations
• Partner with internal teams to support certifications, audits, and change control
• Ensure all NCE Quality Control metrics are met or exceeded
• Implement continuous improvement process for quality and manufacturing
• Own manufacturing-related corrective actions (CAPAs), root cause analysis, and preventive controls

New Product Introduction (NPI) & Scale-Up

• Lead manufacturing readiness for new product introductions from pilot builds through mass production
• Partner with Engineering on DFM/DFA, tooling decisions, and test strategies
• Establish production validation, ramp-up plans, and early yield stabilization

Cost Management & Margin Expansion

• Drive COGS reduction initiatives without compromising safety or quality
• Optimize labor, materials, tooling, and logistics costs
• Support margin expansion initiatives tied to volume growth and supplier consolidation

Risk Management & Business Continuity

• Identify and mitigate manufacturing risks (single-source suppliers, geopolitical risk, capacity constraints)
• Develop contingency plans for supply disruptions, demand spikes, or quality events
• Support inventory strategy decisions in collaboration with Supply Chain and Finance

Leadership & Cross-Functional Collaboration

• Serve as a key operational voice in executive planning and growth discussions
• Collaborate closely with our Japan Engineering Team, Sales and Marketing

Required Qualifications & Experience

• Bachelor’s degree in Engineering, Operations Management, or related field
• 10+ years of progressive experience in manufacturing operations, preferably in:
• Consumer electronics
• Life-safety, IoT, or regulated hardware products
• Proven experience managing contract manufacturers and global supply partners
• Strong working knowledge of regulated manufacturing environments
• Demonstrated success scaling production in high-growth environments

Preferred

• MBA or advanced degree
• Experience with UL-listed or safety-critical products
• Lean Six Sigma certification
• Experience supporting national retail or utility-driven distribution models

This role is critical to DeNova Detect’s ability to save lives at scale. As demand grows through retail expansion, legislative adoption, and national awareness campaigns, the Director of Manufacturing Operations ensures that every product shipped meets the company’s promise of safety, reliability, and trust.

Job Posting: VDC Technician

Starting Salary Range: $55,000 - $62,000

Reports to: Director of Engineering and Design

Location: Woodridge, IL

AMS Industries, Inc. is a leading mechanical contracting firm serving the commercial, industrial, refrigeration, and nuclear industries (PMT). With over 60 years of experience, AMS has grown from a small refrigeration contractor into a multi-discipline, multi-market MEP contractor with more than 1,000 employees. We are committed to delivering exceptional service to our clients, investing in the development of our people, and strengthening the communities we serve.

Located at our Woodridge, IL facility and reporting to the Director of Engineering and Design, the VDC Technician will support project teams through the development, coordination, and management of Building Information Modeling (BIM) and Virtual Design & Construction (VDC) deliverables. This role plays a critical part in ensuring project accuracy, coordination across trades, and the successful execution of design and construction documentation. The VDC Technician will collaborate closely with engineering, project management, and field teams to produce coordinated models, drawings, and digital project documentation.

Responsibilities:

• Prepare Permit and Design Documents.
• Prepare Shop Drawings through careful project coordination.
• Prepare As-built Documents.
• Visit jobsites for Coordination.
• Attend project coordination meetings.
• Collaborate with the project management team and field staff on project requirements and ensure high-quality deliverables.
• Support design team on project work through modeling and adherence with project standards.
• Lead project coordination meetings, as required by contract.
• Manage and distribute coordinated digital documents to the project team.
• Link BIM to project Construction Administration Phase for submittals, construction models, shop drawings and schedules.
• Create Revit assemblies in response to project needs.
• Provide support for electronic file submissions.

Qualifications:

• High School diploma or GED required; college degree preferred.
• 5 years of VDC experience.
• Proficiency in the Autodesk suite of construction platforms including AutoCAD, Revit and Navisworks.
• Experience in construction or trade experience a plus.
• Experience in reality capture and point cloud processing a plus.
• Ability to communicate effectively.
• Ability to work independently, a self-starter who is both goal-oriented and customer-oriented.

What we offer:

• Health Insurance and ESOP (Employee owned) package.
• Health Reimbursement Arrangement (HRA) with Medical PPO
• FSA and Dependent Care
• 401K Matching
• Paid Maternity & Paternity Leave
• Generous PTO roll-over policy
• Social events and outings throughout the year

John Burns Construction is seeking an experienced Senior Estimator to assist the Estimating Department in evaluating and pricing current bid opportunities. This person will report to the Director of Estimating and will have the potential to manage a staff of Estimators and Estimate Coordinators in the future.

We’re looking for your to do the following:

1. Perform detailed evaluation of drawings and specifications to determine the scope of work for subcontractors, vendors, and self-perform activities
2. Manage bid invitations by soliciting subcontractor bids and vendor quotes
3. Prepare subcontractor scopes and complete scope comparisons
4. Generate estimates by quantity takeoff and pricing of work
5. Write contracts and purchase orders
6. Maintain professional working relationships with subcontractors and vendors
7. Generate new bidding opportunities.

You have:

1. Bachelor’s Degree in Engineering, Construction Management or related field of study
2. 7+ years of estimating or construction management experience
3. Background in takeoff and pricing of self-performed work including General Contracting: earthwork, excavation, site utilities, site, and structural concrete, and carpentry. Outside Electrical: street lighting, traffic signals, intelligent transportation systems, underground conduit systems, fiber optics
4. Experience in both Unit Price and Lump Sum bidding
5. HCSS HeavyBid Estimating Software
6. Computer skills including Microsoft Office
7. Strong communication skills, both verbal and written
8. Ability to manage multiple concurrent bids and meet deadlines
9. Ability to assess risk
10. Teamwork orientated
11. Strong organizational skills

We Have:

1. A team-based culture that rewards collaboration, problem solving and process improvement
2. A commitment to your professional development
3. Varied career path opportunities across the different disciplines in the company
4. A new, robust enterprise resource planning software solution
5. Great benefits, including medical, dental, vision, 401K with company contribution, profit sharing, long-term disability
6. Team outings, and an opportunity to get involved and make a difference with various charities in the community

Join us and celebrate the beauty of human experience. Create for happier, healthier lives, with love for nature. Together, with our customers, we deliver food innovations, craft inspired fragrances and develop beauty and wellbeing solutions. There's much to learn and many to learn from, with more than 16,000 employees around the world to explore ideas and ambitions with.

In the USA, we develop, market and produce a wide array of solutions from our 25 most innovative sites, based across the country. Stretch your skills, create and get inspiration from passionate colleagues. Every day, your energy, your thirst for knowledge, and your creativity will shape our future, making a positive difference on billions of people. Every essence of you enriches our world. We are Givaudan. Human by nature.

Join us as our next Production Supervisor reporting to our Production Manager. You will provide support by controling and coordinating the production operations within specific area or section of a plant to ensure that intermediate or finished flavor products are delivered according to established production specifications, schedules and quality standards.

Location:Bedford Park, IL

This is a second shift position

Salary expectation based on technical experience: 95,287.00 - 106,463.00 usd

In this exciting role you will do:

Production Management

• 
  
• 
  

  Prepare the assigned production area to meet the production schedules and targets.

  
  
  
• 
  

  Control inventory to ensure the availability of materials required for the operation.

  
  
  
• 
  

  Monitor the volume and quality of output and adjust tasks, timing, equipment set-up, so that productionspecifications are met and resources are used efficiently.

  
  
  
• 
  

  Protect plant assets and the implementation of internal control regulations.

  
  
  
• 
  

  Prepare production reports so that performance problems can be identified and resolved.

  
  
  

Production Processes

• 
  
• 
  

  Define manufacturing processes for a specific area following safety, EHS standards andefficiency/productivity requirements.

  
  
  
• 
  

  Propose ideas for the continuous improvement program in the area.

  
  
  
• 
  

  Take care on necessary capacity improvements to fulfill the demand evolution and prevent new assetinvestments.

  
  
  
• 
  

  Owner of Lean program roll out and team meetings.

  
  
  

People Management

• 
  
• 
  

  Manage staff to ensure that all production tasks are performed, and all machines and equipment operated,safely.

  
  
  
• 
  

  Document performance and provide ongoing feedback (eg, conducting mid-year and end-year reviews),addressing behavior and job performance issues, recommending hiring and annual salary increases.

  
  
  
• 
  

  Train new workers in our operating procedures and standards.

  
  
  

Required Qualifications:

• 
  
• 
  

  Vocational diploma in Technical Engineering, Supply Chain or related discipline.

  
  
  
• 
  

  8+ years of experience in food manufacturing with exposure to quality or materials process management.

  
  
  
• 
  

  2+ years of progressive experience in people management.

  
  
  
• 
  

  Production Software background Nat_base/SAP.

  
  
  
• 
  

  Knowledge of project management principles.

  
  
  

What We Can Offer You:

• 
  
• 
  

  Healthcare Plan:

  
  
  
• 
  

  Medical

  
  
  
• 
  

  Dental

  
  
  
• 
  

  Vision

  
  
  
• 
  

  High matching 401k plan

  
  
  
• 
  

  Vacation days

  
  
  

#LI-Onsite

At Givaudan, you contribute to delightful taste and scent experiences that touch people's lives.You work within an inspiring teamwork culture - where you can thrive, collaborate and learn from other talented and passionate people across disciplines, regions and divisions.

Every essence of you enriches our world.Diversity of perspectives fuels innovation and fosters deeper connections with our employees, customers, and partners. At Givaudan, we are dedicated to cultivating an inclusive environment where every individual's voice is valued and has the power to shape our world. Join us in making a difference together.

Who we are:

Atkore is forging a future where our employees, customers, suppliers, shareholders, and communities are building better together - a future focused on serving the customer and powering and protecting the world.

With a global network of manufacturing and distribution facilities worldwide, Atkore is a leading provider of electrical, safety and infrastructure solutions.

Who we are looking for:

We are currently looking for a BIM Technician to be based out of Tampa, FL reporting to the Drafting Manager. This person will be responsible for working with the project team to develop accurate and complete modeling drawing sets. The BIM Technician will ensure the integrity of project drawings while maintaining privileged information per the customer and company requirements.

What you'll do:

• 
  
• Accurately identify product specifications and understand of detail assemblies and their application for installation.
  
• Create or revise/update construction drawings, maintaining a tracking log of drawings.
  
• Review drawings for accuracy and scope of work, ensuring quality of final drawings.
  
• Collaborate with team and customers to ensure that projects are successfully completed, and best practices/technical issues are addressed.
  
• Run the multi trade coordination for clashes to assist project team with the design process.
  
• Conduct clash detection and visual walkthroughs using Navisworks Manage.
  
• Research ways to continuously improve our process including providing insight into new time saving methodologies and best practices.
  
• Manage, maintain, and update BIM Project documents.
  

What you'll bring:

• 
  
• Bachelor's (preferred) or Associates Degree in Architecture, Engineering, and Construction (AEC) related field with 1 to 3 years of industry experience.
  
• 1+ years' experience in 3D Revit or 3D AutoCAD.
  
• Technical certificates in Drafting and ED BIM Modeling training (preferred).
  
• Experience with Autodesk Revit, CAD, and BIM procedures (Preferred).
  
• Familiarity with Overhead coordination process including 3D Modeling utilizing Revit in project environment, Project As-builts and turnover for Facility management.
  
• Experience with Microsoft Office Suite, CAD and BIM systems including Autodesk AutoCAD, Revit Suite, BIM 360, Veo, Bluebeam, Word, Excel, and PowerPoint.
  

Within 3 months, you'll:

• 
  
• Complete the onboarding material and training on companies' products and drafting processes.
  
• Collecting information from multiple plans and incorporating them into a model which can be used to build structural support.
  
• Produce 2D shop drawings and 3D models projects with assistance of PM and BIM Designer.
  
• Complete Atkore Immersion process.
  

Within 6 months, you'll:

• 
  
• Communicate effectively with PM's and other team members in order to gather the information needed for each project.
  
• Develop strong knowledge of the companies' products and produce accurate designs based on each project needs.
  
• Assist with BIM Designer to coordination meeting and be part of BIM project development at different phases: modeling, cleaning clashes and producing shop drawings.
  

Within 12 months, you'll:

• 
  
• Produce structural models and drawings using Revit and manage coordination projects.
  
• Manipulate and develop CAD library components for AutoCAD and Revit or other related software.
  
• Independently handle BIM project from start to finish by assisting to BIM Coordination, performing clash detection, and resolving coordination issues.
  

Atkore is a recipient of a Great Place to Work certification and a Top Workplaces USA award! We're committed to creating an engaged and aligned workforce that drives collaborative culture. Our team strives for breakthrough results, stays focused on being standout leaders, and fully supports decisions of the Company. We consistently live the Atkore mission, strategic priorities, and behaviors, all in a way that's consistent with our core values. Together, we build strong leaders that continually endeavor to move us forward.

With a global network of manufacturing and distribution facilities worldwide, Atkore is a leading provider of electrical, safety and infrastructure solutions.

Join our team and align yourself with an industry leader!

Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities

The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c)

Project Manager

Location: Burr Ridge, IL

Shift: 1st Shift

Hire Type: Contract to Hire

Pay Rate: $32-38 per hour

Benefits: Full medical coverage, 401(k) with match, PTO, paid holidays, and strong job stability

Sterling Engineering is hiring a versatile Project Manager for a highly stable, growth‑focused manufacturer known for empowering employees, encouraging ownership, and offering meaningful career development. This role is ideal for someone who enjoys wearing many hats, thrives in fast‑moving environments, and wants direct visibility into operations, supply chain, customer relations, and organizational decision‑making.

You’ll join a company where your ideas matter, your problem‑solving skills are valued, and your ability to influence quality, customer satisfaction, and operational success has a direct impact every day.

Key Responsibilities:

• Lead projects from initiation through completion while ensuring deadlines, quality standards, and deliverables are met.
• Maintain a high level of attention to detail for all project stages.
• Think quickly, pivot when priorities shift, and resolve issues proactively.
• Manage material levels, ensuring accuracy, quality, and readiness for production.
• Source raw materials and maintain strong vendor relationships to ensure on‑time and high‑quality delivery.
• Serve as a primary technical and service contact for customer inquiries regarding product specs, order status, and pricing

Qualifications:

• 5+ years of relevant experience.
• Associate or Bachelor's degree preferred.
• Manufacturing or metal industry experience is a plus.
• High‑energy, proactive problem solver who can adapt quickly and make sound decisions.
• Experience with SAGE 50 Accounting, Excel, Sortly, and project management tools.
• Proven experience in project management, purchasing, customer service, or material quoting.

Qualified applicants will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or genetic information.

At Noratel Group, we design and manufacture customised transformers and wound magnetic components that power critical technologies across renewable energy, healthcare, transportation, and industrial automation. For more than a century, Noratel has been trusted for engineering excellence, reliability, and customer-focused solutions that perform where it matters most.

With more than 2,200 employees worldwide, Noratel operates production facilities across Europe, Asia, and North America. One of these is Shape LLC, located in Addison, Illinois, and part of Noratel’s Magnetics Cluster. Shape specialises in mission-critical, custom electrical transformers for demanding equipment manufacturers - combining the strength of a global group with the agility and collaboration of a local team.

Driven by: Passion, Accountability, Customer Focus, Teamwork, and Excellence (PACTE), we foster a workplace where people support one another and consistently strive for high standards.

These values shape how we work every day and they guide the way we build our teams. To support continued operational excellence at our Shape LLC site in Addison, IL, we are now looking for a Procurement Manager who combines structure, ownership, and a hands-on mindset with a collaborative approach.

This is a hands-on, operational role focused on ensuring reliable material availability, strong supplier partnerships, and cost-effective procurement practices that support production continuity.

The successful candidate will be a structured and proactive professional, comfortable managing purchasing workflows, negotiating with suppliers, monitoring inventory, and collaborating closely with Production, Engineering, Quality, and Finance.

Key Responsibilities

Purchasing & Material Management

• Manage daily purchasing activities, including PO creation, confirmations, follow-up, and delivery tracking
• Ensure timely availability of raw materials, components, and indirect supplies
• Maintain accurate ERP data (pricing, lead times, MOQ, supplier details)
• Monitor inventory levels and coordinate with Production Planning to avoid shortages or excess stock

Supplier Management

• Act as the primary point of contact for suppliers
• Maintain strong relationships with existing suppliers and identify new sourcing opportunities as needed
• Monitor supplier performance (on-time delivery, quality, responsiveness)
• Support resolution of supply disruptions and quality issues

Cost Control & Negotiation

• Identify and support cost-reduction initiatives through negotiation and improved purchasing terms
• Monitor price developments, market trends, and BOM cost impacts
• Track and report Purchase Price Variance (PPV)

Process, Compliance & Documentation

• Maintain purchasing records, contracts, certifications, quotations, and supplier files
• Ensure compliance with internal procedures and purchasing guidelines
• Support implementation of Kanban or vendor-managed inventory solutions where applicable

Cross-Functional Collaboration

• Support Engineering during NPI activities and RFQ/RFP processes
• Work closely with Operations to manage demand variability and supply continuity
• Partner with Finance on invoice discrepancies and supplier payment alignment
• Coordinate with Quality on supplier evaluations and corrective actions

Performance & Reporting

• Track and report key procurement KPIs (OTD, inventory levels, MOQ adherence, PPV)
• Contribute to continuous improvement initiatives focused on lead time reduction and supply stability
• Provide regular updates to the Director of Operations on risks, shortages, and supplier performance

Qualifications & Skills

• Degree in Supply Chain, Business Administration, Procurement, or a related field
• 3–5+ years of experience in purchasing or supply chain roles within a manufacturing environment
• Solid understanding of procurement processes and inventory management
• Proven negotiation skills and working knowledge of contracts and commercial terms
• Strong communication skills, both written and verbal
• ERP experience required (Sage 500 is a plus)
• Analytical mindset with strong attention to detail and data accuracy
• Highly organised, dependable, and disciplined in follow-up
• Professional, ethical, and results-oriented

What we offer

• A hands-on procurement role with real ownership and visible impact on daily manufacturing operations
• Employment in a stable, well-established manufacturing company within a global industrial group
• A collaborative site environment, supported by the resources and expertise of the Noratel Group
• Close cross-functional cooperation with Production, Engineering, Quality, and Finance
• A culture driven by clear values (PACTE), accountability, and continuous improvement
• Compensation range of $100,000–$120,000, aligned with role scope and experience
• Healthcare coverage and a Paid Time Off (PTO) plan

At Shape, you’ll find the closeness of a local team with the strength of an international group.

Here, your work will matter - for our people, for our company, and for the industries we serve.

Ready to take ownership of procurement in a hands-on manufacturing environment? Apply today and help shape the future of Shape LLC within the Noratel Group.

Find out more at: