Engineering Jobs in Westchester Illinois
81 positions found — Page 2
Working within assigned areas, performs on-going Planned Maintenance (PM)and Corrective Maintenance (CM) of high-level diagnostic and therapeutic imaging equipment used throughout the healthcare facility. Assists in the planning and installation of diagnostic and therapeutic imaging equipment.
ESSENTIAL FUNCTIONS
Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.
Meets target objectives and standards for timeliness and quality of Planned Maintenance (PM) schedules and repairs of general and specialized clinical equipment.
Responsible for maintenance, repair and servicing of specialized equipment in one or more of the following areas: CT, MRI, PAC’s, nuclear medicine, ultrasound, angiography, and radiation therapy as assigned by Clinical Engineering (CE) Manager.
Orders parts and supplies, within established departmental guidelines, that are required for the emergency service and repair of all radiological and general medical equipment. Recommend radiology related test equipment and spare equipment parts to the CE Manager.
Responsible for coordinating repairs with vendors and users when needed, this includes follow up paperwork and verification that issues are resolved.
Attends training session on imaging equipment maintenance and technology in order to keep up-to-date on technological and medical equipment advances. Conducts in-service training sessions to radiology clinical/professional staff on proper use and safety of advanced radiology equipment. Also, provides assistance and training to Biomedical Equipment Techs I, IIand Senior Biomed as assigned.
Provides on-call service coverage after normal business hours on a rotating basis, as assigned.
Maintains high level of customer satisfaction as demonstrated by customer satisfaction surveys.
Participates in teamwork by: Keeping others informed. Initiating group decision-making. Working to accomplish team objectives and projects. Seeking feedback about one’s effectiveness as a team member.
Assumes minor extra duties, including work normally assigned to Biomedical Equipment Technicians.
May be assigned duties as Lead Biomedical Equipment Technician or other duties as assigned or required.
Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.
MINIMUM QUALIFICATIONS:
Minimum of Associates of Applied Sciences Degree in related field of medical electronics, electronic technology, imaging service technology or equivalent related military training and experience. Certified Radiology Equipment Service (CRES) preferred but not required.
Five or more years of equivalent experience performing corrective and planned maintenance on nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment, including but not limited to, R/F, Vascular/Specials, CT SIM, Mammography Units, PACS, Nuclear Cameras, Cath Lab, CT, etc. Related experience operating complex testing equipment, including but not limited to high Voltage Bleeder or Dynalyzer, Densitometer, Non-Invasive KVp meter, etc.
Must possess specialized training by manufacturer or third party equipment repair in such areas as CT, MRI, nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment.
Must possess working knowledge of radiation physics, medical terminology, medical instrumentation, anatomy, physiology, imaging service techniques, 21 CFR (Code of Federal Regulations).
Must possess broad knowledge and understanding of OSHA, NFPA, The Joint Commission, EOC, FDA and other specific regulations and standards pertaining to clinical and radiology equipment service and repair.
Maintain up-to-date understanding of The Joint Commission and NFPA standards as well as state and federal regulations.
Ability to analyze and interpret complex information related to malfunctioning imagining equipment as described by clinical staff, then determines equipment operational condition. Follow complex written instructions, perform tasks and document actions taken to restore service.
Must be comfortable operating in a collaborative, shared leadership environment.
Must possess a personal presence that is characterized by a sense of honesty, integrity, and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals, and values of Trinity Health, Ministry Organization, and Clinical Engineering .
Strong communication and inter-personal skills are required to interact positively with all levels of hospital personnel and vendors to achieve positive outcomes, including but not limited to physicists, physicians, administration, etc.
PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS
Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.
Ability to mentally concentrate while being subject to interruptions and changing work priorities.
Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices
Must be able to hear speech, distinguish sounds, and speak.
Must have near vision, far vision, depth perception, and be able to distinguish colors.
Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.
Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.
Must be able to push or pull over 100 pounds frequently (20% of the time).
Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.
Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities
Compensation:
Pay Range: $47.23-70.84 per hour
Actual compensation will fall within the range but may vary based on factors such as experience, qualifications, education, location, licensure, certification requirements, and comparisons to colleagues in similar roles.
Trinity Health Benefits Summary
Our Commitment
Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.
Working within assigned areas, performs on-going Planned Maintenance (PM)and Corrective Maintenance (CM) of high-level diagnostic and therapeutic imaging equipment used throughout the healthcare facility. Assists in the planning and installation of diagnostic and therapeutic imaging equipment.
ESSENTIAL FUNCTIONS
Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.
Meets target objectives and standards for timeliness and quality of Planned Maintenance (PM) schedules and repairs of general and specialized clinical equipment.
Responsible for maintenance, repair and servicing of specialized equipment in one or more of the following areas: CT, MRI, PAC’s, nuclear medicine, ultrasound, angiography, and radiation therapy as assigned by Clinical Engineering (CE) Manager.
Orders parts and supplies, within established departmental guidelines, that are required for the emergency service and repair of all radiological and general medical equipment. Recommend radiology related test equipment and spare equipment parts to the CE Manager.
Responsible for coordinating repairs with vendors and users when needed, this includes follow up paperwork and verification that issues are resolved.
Attends training session on imaging equipment maintenance and technology in order to keep up-to-date on technological and medical equipment advances. Conducts in-service training sessions to radiology clinical/professional staff on proper use and safety of advanced radiology equipment. Also, provides assistance and training to Biomedical Equipment Techs I, IIand Senior Biomed as assigned.
Provides on-call service coverage after normal business hours on a rotating basis, as assigned.
Maintains high level of customer satisfaction as demonstrated by customer satisfaction surveys.
Participates in teamwork by: Keeping others informed. Initiating group decision-making. Working to accomplish team objectives and projects. Seeking feedback about one’s effectiveness as a team member.
Assumes minor extra duties, including work normally assigned to Biomedical Equipment Technicians.
May be assigned duties as Lead Biomedical Equipment Technician or other duties as assigned or required.
Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.
MINIMUM QUALIFICATIONS:
Minimum of Associates of Applied Sciences Degree in related field of medical electronics, electronic technology, imaging service technology or equivalent related military training and experience. Certified Radiology Equipment Service (CRES) preferred but not required.
Five or more years of equivalent experience performing corrective and planned maintenance on nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment, including but not limited to, R/F, Vascular/Specials, CT SIM, Mammography Units, PACS, Nuclear Cameras, Cath Lab, CT, etc. Related experience operating complex testing equipment, including but not limited to high Voltage Bleeder or Dynalyzer, Densitometer, Non-Invasive KVp meter, etc.
Must possess specialized training by manufacturer or third party equipment repair in such areas as CT, MRI, nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment.
Must possess working knowledge of radiation physics, medical terminology, medical instrumentation, anatomy, physiology, imaging service techniques, 21 CFR (Code of Federal Regulations).
Must possess broad knowledge and understanding of OSHA, NFPA, The Joint Commission, EOC, FDA and other specific regulations and standards pertaining to clinical and radiology equipment service and repair.
Maintain up-to-date understanding of The Joint Commission and NFPA standards as well as state and federal regulations.
Ability to analyze and interpret complex information related to malfunctioning imagining equipment as described by clinical staff, then determines equipment operational condition. Follow complex written instructions, perform tasks and document actions taken to restore service.
Must be comfortable operating in a collaborative, shared leadership environment.
Must possess a personal presence that is characterized by a sense of honesty, integrity, and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals, and values of Trinity Health, Ministry Organization, and Clinical Engineering .
Strong communication and inter-personal skills are required to interact positively with all levels of hospital personnel and vendors to achieve positive outcomes, including but not limited to physicists, physicians, administration, etc.
PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS
Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.
Ability to mentally concentrate while being subject to interruptions and changing work priorities.
Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices
Must be able to hear speech, distinguish sounds, and speak.
Must have near vision, far vision, depth perception, and be able to distinguish colors.
Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.
Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.
Must be able to push or pull over 100 pounds frequently (20% of the time).
Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.
Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities
Compensation:
Pay Range: $47.23-70.84 per hour
Actual compensation will fall within the range but may vary based on factors such as experience, qualifications, education, location, licensure, certification requirements, and comparisons to colleagues in similar roles.
Trinity Health Benefits Summary
Our Commitment
Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.
Working within assigned areas, performs on-going Planned Maintenance (PM)and Corrective Maintenance (CM) of high-level diagnostic and therapeutic imaging equipment used throughout the healthcare facility. Assists in the planning and installation of diagnostic and therapeutic imaging equipment.
ESSENTIAL FUNCTIONS
Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.
Meets target objectives and standards for timeliness and quality of Planned Maintenance (PM) schedules and repairs of general and specialized clinical equipment.
Responsible for maintenance, repair and servicing of specialized equipment in one or more of the following areas: CT, MRI, PAC’s, nuclear medicine, ultrasound, angiography, and radiation therapy as assigned by Clinical Engineering (CE) Manager.
Orders parts and supplies, within established departmental guidelines, that are required for the emergency service and repair of all radiological and general medical equipment. Recommend radiology related test equipment and spare equipment parts to the CE Manager.
Responsible for coordinating repairs with vendors and users when needed, this includes follow up paperwork and verification that issues are resolved.
Attends training session on imaging equipment maintenance and technology in order to keep up-to-date on technological and medical equipment advances. Conducts in-service training sessions to radiology clinical/professional staff on proper use and safety of advanced radiology equipment. Also, provides assistance and training to Biomedical Equipment Techs I, IIand Senior Biomed as assigned.
Provides on-call service coverage after normal business hours on a rotating basis, as assigned.
Maintains high level of customer satisfaction as demonstrated by customer satisfaction surveys.
Participates in teamwork by: Keeping others informed. Initiating group decision-making. Working to accomplish team objectives and projects. Seeking feedback about one’s effectiveness as a team member.
Assumes minor extra duties, including work normally assigned to Biomedical Equipment Technicians.
May be assigned duties as Lead Biomedical Equipment Technician or other duties as assigned or required.
Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.
MINIMUM QUALIFICATIONS:
Minimum of Associates of Applied Sciences Degree in related field of medical electronics, electronic technology, imaging service technology or equivalent related military training and experience. Certified Radiology Equipment Service (CRES) preferred but not required.
Five or more years of equivalent experience performing corrective and planned maintenance on nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment, including but not limited to, R/F, Vascular/Specials, CT SIM, Mammography Units, PACS, Nuclear Cameras, Cath Lab, CT, etc. Related experience operating complex testing equipment, including but not limited to high Voltage Bleeder or Dynalyzer, Densitometer, Non-Invasive KVp meter, etc.
Must possess specialized training by manufacturer or third party equipment repair in such areas as CT, MRI, nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment.
Must possess working knowledge of radiation physics, medical terminology, medical instrumentation, anatomy, physiology, imaging service techniques, 21 CFR (Code of Federal Regulations).
Must possess broad knowledge and understanding of OSHA, NFPA, The Joint Commission, EOC, FDA and other specific regulations and standards pertaining to clinical and radiology equipment service and repair.
Maintain up-to-date understanding of The Joint Commission and NFPA standards as well as state and federal regulations.
Ability to analyze and interpret complex information related to malfunctioning imagining equipment as described by clinical staff, then determines equipment operational condition. Follow complex written instructions, perform tasks and document actions taken to restore service.
Must be comfortable operating in a collaborative, shared leadership environment.
Must possess a personal presence that is characterized by a sense of honesty, integrity, and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals, and values of Trinity Health, Ministry Organization, and Clinical Engineering .
Strong communication and inter-personal skills are required to interact positively with all levels of hospital personnel and vendors to achieve positive outcomes, including but not limited to physicists, physicians, administration, etc.
PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS
Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.
Ability to mentally concentrate while being subject to interruptions and changing work priorities.
Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices
Must be able to hear speech, distinguish sounds, and speak.
Must have near vision, far vision, depth perception, and be able to distinguish colors.
Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.
Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.
Must be able to push or pull over 100 pounds frequently (20% of the time).
Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.
Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities
Compensation:
Pay Range: $47.23-70.84 per hour
Actual compensation will fall within the range but may vary based on factors such as experience, qualifications, education, location, licensure, certification requirements, and comparisons to colleagues in similar roles.
Trinity Health Benefits Summary
Our Commitment
Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.
Working within assigned areas, performs on-going Planned Maintenance (PM)and Corrective Maintenance (CM) of high-level diagnostic and therapeutic imaging equipment used throughout the healthcare facility. Assists in the planning and installation of diagnostic and therapeutic imaging equipment.
ESSENTIAL FUNCTIONS
Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.
Meets target objectives and standards for timeliness and quality of Planned Maintenance (PM) schedules and repairs of general and specialized clinical equipment.
Responsible for maintenance, repair and servicing of specialized equipment in one or more of the following areas: CT, MRI, PAC’s, nuclear medicine, ultrasound, angiography, and radiation therapy as assigned by Clinical Engineering (CE) Manager.
Orders parts and supplies, within established departmental guidelines, that are required for the emergency service and repair of all radiological and general medical equipment. Recommend radiology related test equipment and spare equipment parts to the CE Manager.
Responsible for coordinating repairs with vendors and users when needed, this includes follow up paperwork and verification that issues are resolved.
Attends training session on imaging equipment maintenance and technology in order to keep up-to-date on technological and medical equipment advances. Conducts in-service training sessions to radiology clinical/professional staff on proper use and safety of advanced radiology equipment. Also, provides assistance and training to Biomedical Equipment Techs I, IIand Senior Biomed as assigned.
Provides on-call service coverage after normal business hours on a rotating basis, as assigned.
Maintains high level of customer satisfaction as demonstrated by customer satisfaction surveys.
Participates in teamwork by: Keeping others informed. Initiating group decision-making. Working to accomplish team objectives and projects. Seeking feedback about one’s effectiveness as a team member.
Assumes minor extra duties, including work normally assigned to Biomedical Equipment Technicians.
May be assigned duties as Lead Biomedical Equipment Technician or other duties as assigned or required.
Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.
MINIMUM QUALIFICATIONS:
Minimum of Associates of Applied Sciences Degree in related field of medical electronics, electronic technology, imaging service technology or equivalent related military training and experience. Certified Radiology Equipment Service (CRES) preferred but not required.
Five or more years of equivalent experience performing corrective and planned maintenance on nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment, including but not limited to, R/F, Vascular/Specials, CT SIM, Mammography Units, PACS, Nuclear Cameras, Cath Lab, CT, etc. Related experience operating complex testing equipment, including but not limited to high Voltage Bleeder or Dynalyzer, Densitometer, Non-Invasive KVp meter, etc.
Must possess specialized training by manufacturer or third party equipment repair in such areas as CT, MRI, nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment.
Must possess working knowledge of radiation physics, medical terminology, medical instrumentation, anatomy, physiology, imaging service techniques, 21 CFR (Code of Federal Regulations).
Must possess broad knowledge and understanding of OSHA, NFPA, The Joint Commission, EOC, FDA and other specific regulations and standards pertaining to clinical and radiology equipment service and repair.
Maintain up-to-date understanding of The Joint Commission and NFPA standards as well as state and federal regulations.
Ability to analyze and interpret complex information related to malfunctioning imagining equipment as described by clinical staff, then determines equipment operational condition. Follow complex written instructions, perform tasks and document actions taken to restore service.
Must be comfortable operating in a collaborative, shared leadership environment.
Must possess a personal presence that is characterized by a sense of honesty, integrity, and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals, and values of Trinity Health, Ministry Organization, and Clinical Engineering .
Strong communication and inter-personal skills are required to interact positively with all levels of hospital personnel and vendors to achieve positive outcomes, including but not limited to physicists, physicians, administration, etc.
PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS
Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.
Ability to mentally concentrate while being subject to interruptions and changing work priorities.
Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices
Must be able to hear speech, distinguish sounds, and speak.
Must have near vision, far vision, depth perception, and be able to distinguish colors.
Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.
Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.
Must be able to push or pull over 100 pounds frequently (20% of the time).
Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.
Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities
Compensation:
Pay Range: $47.23-70.84 per hour
Actual compensation will fall within the range but may vary based on factors such as experience, qualifications, education, location, licensure, certification requirements, and comparisons to colleagues in similar roles.
Trinity Health Benefits Summary
Our Commitment
Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.
Mackie Consultants, LLC, a leading consultant in Civil Engineering and Land Surveying located in Rosemont, IL, has an opening for a Civil Design Engineer with 4+ years of experience. Selected candidate should possess entry level knowledge of site grading, stormwater management, sanitary sewer design, water supply systems and basic roadway design for private and public sector projects. Candidate should be able to handle a multitude of projects for clients in both the public and private sector.
Essential Duties and Responsibilities:
- Perform design and analysis for civil engineering projects using approved computer programs and manual computations in accordance with the accepted design practice.
- Work independently on design and production of construction plans, specification and cost estimates.
- Prepare design calculations quantity take-offs and cost estimates.
- Work closely with other disciplines on multi-discipline projects.
- Perform their own CAD work.
- Attend project meetings both internally and with clients.
- Assist Project Manager with project administrative activities, document controls and project scheduling.
- Other assignments as needed.
Key Qualifications:
- B.S. or M.S. in Civil Engineering.
- 4+ Years of experience.
- PE license preferred.
- Working knowledge and experience with state and regional regulations.
- Excellent written and oral communication skills.
- Knowledge of MicroStation preferred.
- Valid driver's license required.
Mackie Consultants is part of The Burke Group (TBG). We are a fast-growing family of 9 companies offering civil engineering and land surveying services throughout the Midwest. We offer a professional work environment as well as exceptional learning opportunities to those engineers committed to personal service and professional growth. We seek out experienced and responsive professionals who are committed to personal service. Mackie Consultants offers high growth potential and a comprehensive benefits package including medical, dental, life, disability, PTO days as well as an employer matching 401(k) program.
Mackie Consultants, LLC is an Equal Opportunity Employer It is the policy of Mackie Consultants, LLC to provide equal employment opportunity without regard to race, color, age, religion, sex, sexual orientation, national origin, marital status, changes in marital status, pregnancy, childbirth, or medical or common conditions related to pregnancy or childbirth, parenthood, creed, veteran's status, veteran's disability and physical or mental disability, citizenship status or unfavorable discharge from the military. Mackie Consultants, LLC intends that all matters related to recruiting, hiring, training, compensation, benefits, promotions, transfers, terminations and layoffs and recalls, as well as all Mackie Consultants, LLC sponsored social and recreational programs, and all treatment on the job, be free of unlawful discriminatory practices.
Tool & Die Technician
Location: Franklin Park, Illinois
Overview
A manufacturing company in the Franklin Park area is seeking a Tool & Die Technician to support tooling and die maintenance within a production environment. This role is responsible for building, repairing, and maintaining tooling used in metal forming and fabrication processes.
The ideal candidate has experience working with stamping dies, tooling components, and precision machining equipment, and is comfortable troubleshooting tooling issues that impact production efficiency.
Key Responsibilities
• Build, repair, and maintain tooling, dies, and fixtures used in metal fabrication or stamping operations.
• Interpret engineering drawings, blueprints, and technical instructions to support toolroom activities.
• Diagnose tooling issues and perform repairs to maintain proper die function and reduce production downtime.
• Set up and operate toolroom equipment such as mills, lathes, grinders, drills, and related machining equipment.
• Inspect dies and tooling components for wear or damage and perform necessary maintenance or adjustments.
• Use precision measuring tools including micrometers, calipers, and gauges to verify tolerances and specifications.
• Disassemble, clean, and reassemble tooling components using appropriate hand tools and maintenance procedures.
• Support troubleshooting efforts related to tooling issues affecting production equipment.
• Perform routine maintenance on toolroom machinery and equipment.
• Maintain documentation related to tooling maintenance, repairs, and inspection activities.
• Assist with training or supporting junior technicians or apprentices when needed.
• Maintain a clean, organized, and safe work environment while following company safety policies.
Qualifications
• High school diploma or equivalent required; technical training or apprenticeship in tool and die or machining preferred.
• Approximately 1–3 years of experience working in tool and die, machining, or toolroom environments.
• Ability to read and interpret blueprints and engineering drawings.
• Mechanical aptitude and familiarity with machining and tooling equipment.
• Experience operating forklifts, hoists, or cranes in an industrial setting is helpful.
• Strong communication skills and the ability to work collaboratively within a manufacturing team.
Physical Requirements
• Ability to work scheduled shifts in a manufacturing environment.
• Frequent standing and movement throughout the workday.
• Ability to lift or move materials and tooling components up to approximately 70 pounds.
• Work performed in an industrial environment with exposure to machinery, noise, and shop conditions typical of metal fabrication operations.
John Burns Construction is seeking an experienced Senior Estimator to assist the Estimating Department in evaluating and pricing current bid opportunities. This person will report to the Director of Estimating and will have the potential to manage a staff of Estimators and Estimate Coordinators in the future.
We’re looking for your to do the following:
- Perform detailed evaluation of drawings and specifications to determine the scope of work for subcontractors, vendors, and self-perform activities
- Manage bid invitations by soliciting subcontractor bids and vendor quotes
- Prepare subcontractor scopes and complete scope comparisons
- Generate estimates by quantity takeoff and pricing of work
- Write contracts and purchase orders
- Maintain professional working relationships with subcontractors and vendors
- Generate new bidding opportunities.
You have:
- Bachelor’s Degree in Engineering, Construction Management or related field of study
- 7+ years of estimating or construction management experience
- Background in takeoff and pricing of self-performed work including General Contracting: earthwork, excavation, site utilities, site, and structural concrete, and carpentry. Outside Electrical: street lighting, traffic signals, intelligent transportation systems, underground conduit systems, fiber optics
- Experience in both Unit Price and Lump Sum bidding
- HCSS HeavyBid Estimating Software
- Computer skills including Microsoft Office
- Strong communication skills, both verbal and written
- Ability to manage multiple concurrent bids and meet deadlines
- Ability to assess risk
- Teamwork orientated
- Strong organizational skills
We Have:
- A team-based culture that rewards collaboration, problem solving and process improvement
- A commitment to your professional development
- Varied career path opportunities across the different disciplines in the company
- A new, robust enterprise resource planning software solution
- Great benefits, including medical, dental, vision, 401K with company contribution, profit sharing, long-term disability
- Team outings, and an opportunity to get involved and make a difference with various charities in the community
Mindlance is here to help you to find the perfect fit with just the right company.
Currently, we are seeking a .
Net Developer for an exciting career growth opportunity.
Make your next big career move with the kind of position that will allow you to be genuinely passionate about the work you do! Our recruiters will work closely with you to help you get the edge over the competition.
Let Mindlance advocate for you – apply today! “Mindlance is an Equal Opportunity Employer and does not discriminate in employment on the basis of – Minority/Gender/Disability/Religion/LGBTQI/Age/Veterans.” Job Title: Jr Engineer Job Category: Engineering Industry: Industrial, Utilities
- Gas
- Electric Job Location: Oakbrook Terrace, IL Zip Code: 60181 Top 3/5 Skills: Civil CAD, AutoCAD OR MicroStation Bachelor’s degree in Engineering Min & Max Pay Rate (Ex: $35.00 /hr.
– $45.00/hr.): Job Requirements · Experience in roadway design · Internship or 1-3 years of experience.
· Adobe experience · Auto-cad, micro station Bachelor’s degree in Engineering – Civil or electrical, maybe mechanical but Civil is most preferred.
What You’ll Do: A Junior Engineer is an entry-level position in the field of engineering.
Responsibilities may vary depending on the specific engineering discipline, but generally include: Assisting senior engineers in designing, developing, and testing products, systems, or structures.
Conducting research and analysis to solve engineering problems.
Preparing and maintaining engineering documentation, such as drawings, specifications, and reports.
Assisting in the evaluation and selection of materials and equipment for projects.
Participating in project planning and management activities.
Performing calculations and simulations to support engineering designs.
Collaborating with other engineers and professionals on project teams.
Ensuring compliance with engineering standards and regulations.
Assisting in the troubleshooting and resolution of technical issues.
Keeping abreast of advancements in engineering technology and practices.
Reviewing roadway plans from roadway agencies and municipalities.
Roadway improvements and how do their plans affect our facilities.
Send over plans to PM team who will run with it.
Review road plans associate where facilities are and determine if conflict exists and how to proceed
Join us and celebrate the beauty of human experience. Create for happier, healthier lives, with love for nature. Together, with our customers, we deliver food innovations, craft inspired fragrances and develop beauty and wellbeing solutions. There's much to learn and many to learn from, with more than 16,000 employees around the world to explore ideas and ambitions with.
In the USA, we develop, market and produce a wide array of solutions from our 25 most innovative sites, based across the country. Stretch your skills, create and get inspiration from passionate colleagues. Every day, your energy, your thirst for knowledge, and your creativity will shape our future, making a positive difference on billions of people. Every essence of you enriches our world. We are Givaudan. Human by nature.
Join us as our next Production Supervisor reporting to our Production Manager. You will provide support by controling and coordinating the production operations within specific area or section of a plant to ensure that intermediate or finished flavor products are delivered according to established production specifications, schedules and quality standards.
Location:Bedford Park, IL
This is a second shift position
Salary expectation based on technical experience: 95,287.00 - 106,463.00 usd
In this exciting role you will do:
Production Management
Prepare the assigned production area to meet the production schedules and targets.
Control inventory to ensure the availability of materials required for the operation.
Monitor the volume and quality of output and adjust tasks, timing, equipment set-up, so that productionspecifications are met and resources are used efficiently.
Protect plant assets and the implementation of internal control regulations.
Prepare production reports so that performance problems can be identified and resolved.
Production Processes
Define manufacturing processes for a specific area following safety, EHS standards andefficiency/productivity requirements.
Propose ideas for the continuous improvement program in the area.
Take care on necessary capacity improvements to fulfill the demand evolution and prevent new assetinvestments.
Owner of Lean program roll out and team meetings.
People Management
Manage staff to ensure that all production tasks are performed, and all machines and equipment operated,safely.
Document performance and provide ongoing feedback (eg, conducting mid-year and end-year reviews),addressing behavior and job performance issues, recommending hiring and annual salary increases.
Train new workers in our operating procedures and standards.
Required Qualifications:
Vocational diploma in Technical Engineering, Supply Chain or related discipline.
8+ years of experience in food manufacturing with exposure to quality or materials process management.
2+ years of progressive experience in people management.
Production Software background Nat_base/SAP.
Knowledge of project management principles.
What We Can Offer You:
Healthcare Plan:
Medical
Dental
Vision
High matching 401k plan
Vacation days
#LI-Onsite
At Givaudan, you contribute to delightful taste and scent experiences that touch people's lives.You work within an inspiring teamwork culture - where you can thrive, collaborate and learn from other talented and passionate people across disciplines, regions and divisions.
Every essence of you enriches our world.Diversity of perspectives fuels innovation and fosters deeper connections with our employees, customers, and partners. At Givaudan, we are dedicated to cultivating an inclusive environment where every individual's voice is valued and has the power to shape our world. Join us in making a difference together.
Who we are:
Atkore is forging a future where our employees, customers, suppliers, shareholders, and communities are building better together - a future focused on serving the customer and powering and protecting the world.
With a global network of manufacturing and distribution facilities worldwide, Atkore is a leading provider of electrical, safety and infrastructure solutions.
Who we are looking for:
We are currently looking for a BIM Technician to be based out of Tampa, FL reporting to the Drafting Manager. This person will be responsible for working with the project team to develop accurate and complete modeling drawing sets. The BIM Technician will ensure the integrity of project drawings while maintaining privileged information per the customer and company requirements.
What you'll do:
- Accurately identify product specifications and understand of detail assemblies and their application for installation.
- Create or revise/update construction drawings, maintaining a tracking log of drawings.
- Review drawings for accuracy and scope of work, ensuring quality of final drawings.
- Collaborate with team and customers to ensure that projects are successfully completed, and best practices/technical issues are addressed.
- Run the multi trade coordination for clashes to assist project team with the design process.
- Conduct clash detection and visual walkthroughs using Navisworks Manage.
- Research ways to continuously improve our process including providing insight into new time saving methodologies and best practices.
- Manage, maintain, and update BIM Project documents.
What you'll bring:
- Bachelor's (preferred) or Associates Degree in Architecture, Engineering, and Construction (AEC) related field with 1 to 3 years of industry experience.
- 1+ years' experience in 3D Revit or 3D AutoCAD.
- Technical certificates in Drafting and ED BIM Modeling training (preferred).
- Experience with Autodesk Revit, CAD, and BIM procedures (Preferred).
- Familiarity with Overhead coordination process including 3D Modeling utilizing Revit in project environment, Project As-builts and turnover for Facility management.
- Experience with Microsoft Office Suite, CAD and BIM systems including Autodesk AutoCAD, Revit Suite, BIM 360, Veo, Bluebeam, Word, Excel, and PowerPoint.
Within 3 months, you'll:
- Complete the onboarding material and training on companies' products and drafting processes.
- Collecting information from multiple plans and incorporating them into a model which can be used to build structural support.
- Produce 2D shop drawings and 3D models projects with assistance of PM and BIM Designer.
- Complete Atkore Immersion process.
Within 6 months, you'll:
- Communicate effectively with PM's and other team members in order to gather the information needed for each project.
- Develop strong knowledge of the companies' products and produce accurate designs based on each project needs.
- Assist with BIM Designer to coordination meeting and be part of BIM project development at different phases: modeling, cleaning clashes and producing shop drawings.
Within 12 months, you'll:
- Produce structural models and drawings using Revit and manage coordination projects.
- Manipulate and develop CAD library components for AutoCAD and Revit or other related software.
- Independently handle BIM project from start to finish by assisting to BIM Coordination, performing clash detection, and resolving coordination issues.
Atkore is a recipient of a Great Place to Work certification and a Top Workplaces USA award! We're committed to creating an engaged and aligned workforce that drives collaborative culture. Our team strives for breakthrough results, stays focused on being standout leaders, and fully supports decisions of the Company. We consistently live the Atkore mission, strategic priorities, and behaviors, all in a way that's consistent with our core values. Together, we build strong leaders that continually endeavor to move us forward.
With a global network of manufacturing and distribution facilities worldwide, Atkore is a leading provider of electrical, safety and infrastructure solutions.
Join our team and align yourself with an industry leader!
Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities
The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c)
