Engineering Jobs in Walls, MS
68 positions found — Page 3
Test Engineer - Specializes in advanced electronics testing solutions (MEMPHIS)
Salary not disclosed
SUMMARY
Under limited supervision designs, develops and maintains test procedures, tester hardware and software for electronic circuit board production.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.
· Review circuit board designs for testability requirements.
· Support manufacturing with failure analysis, tester debugging, reduction of intermittent failures and downtime of test equipment.
· Prepare recommendations for testing and documentation of procedures to be used from the product design phase through to initial production.
· Generate reports and analysis of test data, prepares documentation and recommendations.
· Review test equipment designs, data and RMA issues with customers regularly.
· Design, and direct engineering and technical personnel in fabrication of testing and test control apparatus and equipment.
· Direct and coordinate engineering activities concerned with development, procurement, installation, and calibration of instruments, equipment, and control devices required to test, record, and reduce test data.
· Determine conditions under which tests are to be conducted and sequences and phases of test operations.
· Direct and exercise control over operational, functional, and performance phases of tests.
· Perform moderately complex assignments of the engineering test function for standard and/or custom devices.
· Analyze and interpret test data and prepares technical reports for use by test engineering and management personnel.
· Develop or use computer software and hardware to conduct tests on machinery and equipment.
· Perform semi-routine technique development and maintenance, subject to established Jabil standards, including ISO and QS development standards.
· May provide training in new procedures to production testing staff.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
MINIMUM REQUIREMENTS
Bachelors of Science in Electronics or Electrical Engineering from four-year college or university preferred; or related experience and/or training; or equivalent combination of education and experience.
LANGUAGE SKILLS
Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
MATHEMATICAL SKILLS
Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
REASONING ABILITY
Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is frequently required to walk, and to lift and carry PC’s and test equipment weighing up to 50 lbs. Specific vision abilities required by this job include close vision and use of computer monitor screens a great deal of time.
WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Individual’s primary workstation is located in the office area, with some time spent each day on the manufacturing floor. The noise level in this environment ranges from low to moderate.
Under limited supervision designs, develops and maintains test procedures, tester hardware and software for electronic circuit board production.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.
· Review circuit board designs for testability requirements.
· Support manufacturing with failure analysis, tester debugging, reduction of intermittent failures and downtime of test equipment.
· Prepare recommendations for testing and documentation of procedures to be used from the product design phase through to initial production.
· Generate reports and analysis of test data, prepares documentation and recommendations.
· Review test equipment designs, data and RMA issues with customers regularly.
· Design, and direct engineering and technical personnel in fabrication of testing and test control apparatus and equipment.
· Direct and coordinate engineering activities concerned with development, procurement, installation, and calibration of instruments, equipment, and control devices required to test, record, and reduce test data.
· Determine conditions under which tests are to be conducted and sequences and phases of test operations.
· Direct and exercise control over operational, functional, and performance phases of tests.
· Perform moderately complex assignments of the engineering test function for standard and/or custom devices.
· Analyze and interpret test data and prepares technical reports for use by test engineering and management personnel.
· Develop or use computer software and hardware to conduct tests on machinery and equipment.
· Perform semi-routine technique development and maintenance, subject to established Jabil standards, including ISO and QS development standards.
· May provide training in new procedures to production testing staff.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
MINIMUM REQUIREMENTS
Bachelors of Science in Electronics or Electrical Engineering from four-year college or university preferred; or related experience and/or training; or equivalent combination of education and experience.
LANGUAGE SKILLS
Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
MATHEMATICAL SKILLS
Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
REASONING ABILITY
Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is frequently required to walk, and to lift and carry PC’s and test equipment weighing up to 50 lbs. Specific vision abilities required by this job include close vision and use of computer monitor screens a great deal of time.
WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Individual’s primary workstation is located in the office area, with some time spent each day on the manufacturing floor. The noise level in this environment ranges from low to moderate.
temporary
Production Optimization Specialist (MEMPHIS)
🏢 JABIL CIRCUIT, INC
$55,900 - 89,400
JOB SUMMARY
Industrial Engineer I will support the Industrial Engineering Department in planning, designing, implementing and managing; integrated, production and service delivery systems that assure performance, reliability, maintainability, schedule adherence and cost control within the production site.
Main focus: conducts studies to determine the most efficient sequence of operations and workflow and recommends methods for maximum utilization of production equipment and personnel.
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Monitor and continuously improve daily quality/efficiency performance for assigned areas.
· Design and procure production tooling, processing equipment and workstations.
· Coordinate layout and workstation move activities.
· Prepares time estimates for proposed projects and evaluates time factors.
· Minimize change over time by ensuring programs use common set-ups where possible.
· Verify that machine maintenance is being performed on schedule.
· Reduce machine-generated scrap by monitoring machine management data and taking corrective action to improve or correct the operations.
· Reduce manual assembly scrap by monitoring quality data and taking corrective action to improve or correct the operations.
· Analyzes work force utilization, facility layout, and operational data such as production costs, process flow charts, and production schedules, to determine efficient utilization of workers and equipment.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Key Requirements:
o Understanding and application of broad range of industrial engineering tools (ie. Work measurement, process mapping, facilities and workstation design, etc.)
o Understanding of Jabil’s global strategies and direction
o Understanding of site’s facilities, capabilities and how they tie back to the Jabil strategies and direction
o Strong analytical ability
o Able to implement continuous improvements and cost reduction programs
o Good communication skills
· Proficiency in use of personal computers, Microsoft Office products, Microsoft Visio, Microsoft Project, and AutoCAD skills required.
Industrial Engineer I will support the Industrial Engineering Department in planning, designing, implementing and managing; integrated, production and service delivery systems that assure performance, reliability, maintainability, schedule adherence and cost control within the production site.
Main focus: conducts studies to determine the most efficient sequence of operations and workflow and recommends methods for maximum utilization of production equipment and personnel.
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Monitor and continuously improve daily quality/efficiency performance for assigned areas.
· Design and procure production tooling, processing equipment and workstations.
· Coordinate layout and workstation move activities.
· Prepares time estimates for proposed projects and evaluates time factors.
· Minimize change over time by ensuring programs use common set-ups where possible.
· Verify that machine maintenance is being performed on schedule.
· Reduce machine-generated scrap by monitoring machine management data and taking corrective action to improve or correct the operations.
· Reduce manual assembly scrap by monitoring quality data and taking corrective action to improve or correct the operations.
· Analyzes work force utilization, facility layout, and operational data such as production costs, process flow charts, and production schedules, to determine efficient utilization of workers and equipment.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Key Requirements:
o Understanding and application of broad range of industrial engineering tools (ie. Work measurement, process mapping, facilities and workstation design, etc.)
o Understanding of Jabil’s global strategies and direction
o Understanding of site’s facilities, capabilities and how they tie back to the Jabil strategies and direction
o Strong analytical ability
o Able to implement continuous improvements and cost reduction programs
o Good communication skills
· Proficiency in use of personal computers, Microsoft Office products, Microsoft Visio, Microsoft Project, and AutoCAD skills required.
temporary
Manufacturing Quality Assurance Analyst (MEMPHIS)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
How Will You Make An Impact?
To be a technical focal point to monitor and work supplier quality issues directly with the manufacturer and communicate status on non-conforming parts/suppliers across all programs. Evaluate supplier performance, determine appropriate Inspection processes and provides guidance to Receiving Inspection function at the site level.
Location:
This role will be based on-site at our Memphis, TN facility.
What Will You Do?
- Serve as the focal person for commodity related quality and functional issues that stem from components being purchased for manufacturing.
- Ensure that all production critical supplier issues are resolved in a timely manner, and corrective actions are implemented correctly.
- Serve as the point of contact for Inspection Plans and Inspection Methods, and provide guidance to Receiving Inspection Auditors.
- Ensuring ongoing site supplier evaluation is performed; This would be achieved by using site information collected from Receiving Inspection, MRB, Customer Returns, SCAR database and by liaison efforts with customer work cells.
- Performance will be reported internally, to the supplier, and to the customer where applicable.
- Perform supplier audit interfacing with Corporate SQE if applicable.
- To provide documentation to perform Inspection of components per Inspection Plans in SAP.
- Monitor and drive PPM issues with the supply base in addition to helping them achieve “Dock to Stock” certified with Jabil (in accordance to the vendor performance system).
- Drive supplier selection strategies that will yield a supply base that can be used across all customer programs providing leverage cost savings.
- Proactively communicate information or issues that may impact the product costs of manufacturability to all affected departments.
- Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
- Comply and follow all procedures within the company security policy.
How Will You Get Here?
Education:
- Bachelor’s degree in Industrial Engineering or related field preferred.
Experience:
- 0-2+ years of experience in Quality or Manufacturing Engineering.
- Or an equivalent combination of education, experience, and/or training.
What Can Jabil Offer You?
Along with growth, stability, and the opportunity to be challenged, Jabil offers a competitive benefits package that includes:
- Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options
- 401K Match
- Employee Stock Purchase Plan
- Paid Time Off
- Tuition Reimbursement
- Life, AD&D, and Disability Insurance
- Commuter Benefits
- Employee Assistance Program
- Pet Insurance
- Adoption Assistance
- Annual Merit Increases
- Community Volunteer Opportunities
To be a technical focal point to monitor and work supplier quality issues directly with the manufacturer and communicate status on non-conforming parts/suppliers across all programs. Evaluate supplier performance, determine appropriate Inspection processes and provides guidance to Receiving Inspection function at the site level.
Location:
This role will be based on-site at our Memphis, TN facility.
What Will You Do?
- Serve as the focal person for commodity related quality and functional issues that stem from components being purchased for manufacturing.
- Ensure that all production critical supplier issues are resolved in a timely manner, and corrective actions are implemented correctly.
- Serve as the point of contact for Inspection Plans and Inspection Methods, and provide guidance to Receiving Inspection Auditors.
- Ensuring ongoing site supplier evaluation is performed; This would be achieved by using site information collected from Receiving Inspection, MRB, Customer Returns, SCAR database and by liaison efforts with customer work cells.
- Performance will be reported internally, to the supplier, and to the customer where applicable.
- Perform supplier audit interfacing with Corporate SQE if applicable.
- To provide documentation to perform Inspection of components per Inspection Plans in SAP.
- Monitor and drive PPM issues with the supply base in addition to helping them achieve “Dock to Stock” certified with Jabil (in accordance to the vendor performance system).
- Drive supplier selection strategies that will yield a supply base that can be used across all customer programs providing leverage cost savings.
- Proactively communicate information or issues that may impact the product costs of manufacturability to all affected departments.
- Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
- Comply and follow all procedures within the company security policy.
How Will You Get Here?
Education:
- Bachelor’s degree in Industrial Engineering or related field preferred.
Experience:
- 0-2+ years of experience in Quality or Manufacturing Engineering.
- Or an equivalent combination of education, experience, and/or training.
What Can Jabil Offer You?
Along with growth, stability, and the opportunity to be challenged, Jabil offers a competitive benefits package that includes:
- Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options
- 401K Match
- Employee Stock Purchase Plan
- Paid Time Off
- Tuition Reimbursement
- Life, AD&D, and Disability Insurance
- Commuter Benefits
- Employee Assistance Program
- Pet Insurance
- Adoption Assistance
- Annual Merit Increases
- Community Volunteer Opportunities
temporary
Supply Chain Quality Specialist (MEMPHIS)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
How Will You Make An Impact?
To be a technical focal point to monitor and work supplier quality issues directly with the manufacturer and communicate status on non-conforming parts/suppliers across all programs. Evaluate supplier performance, determine appropriate Inspection processes and provides guidance to Receiving Inspection function at the site level.
Location:
This role will be based on-site at our Memphis, TN facility.
What Will You Do?
- Serve as the focal person for commodity related quality and functional issues that stem from components being purchased for manufacturing.
- Ensure that all production critical supplier issues are resolved in a timely manner, and corrective actions are implemented correctly.
- Serve as the point of contact for Inspection Plans and Inspection Methods, and provide guidance to Receiving Inspection Auditors.
- Ensuring ongoing site supplier evaluation is performed; This would be achieved by using site information collected from Receiving Inspection, MRB, Customer Returns, SCAR database and by liaison efforts with customer work cells.
- Performance will be reported internally, to the supplier, and to the customer where applicable.
- Perform supplier audit interfacing with Corporate SQE if applicable.
- To provide documentation to perform Inspection of components per Inspection Plans in SAP.
- Monitor and drive PPM issues with the supply base in addition to helping them achieve “Dock to Stock” certified with Jabil (in accordance to the vendor performance system).
- Drive supplier selection strategies that will yield a supply base that can be used across all customer programs providing leverage cost savings.
- Proactively communicate information or issues that may impact the product costs of manufacturability to all affected departments.
- Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
- Comply and follow all procedures within the company security policy.
How Will You Get Here?
Education:
- Bachelor’s degree in Industrial Engineering or related field preferred.
Experience:
- 0-2+ years of experience in Quality or Manufacturing Engineering.
- Or an equivalent combination of education, experience, and/or training.
What Can Jabil Offer You?
Along with growth, stability, and the opportunity to be challenged, Jabil offers a competitive benefits package that includes:
- Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options
- 401K Match
- Employee Stock Purchase Plan
- Paid Time Off
- Tuition Reimbursement
- Life, AD&D, and Disability Insurance
- Commuter Benefits
- Employee Assistance Program
- Pet Insurance
- Adoption Assistance
- Annual Merit Increases
- Community Volunteer Opportunities
To be a technical focal point to monitor and work supplier quality issues directly with the manufacturer and communicate status on non-conforming parts/suppliers across all programs. Evaluate supplier performance, determine appropriate Inspection processes and provides guidance to Receiving Inspection function at the site level.
Location:
This role will be based on-site at our Memphis, TN facility.
What Will You Do?
- Serve as the focal person for commodity related quality and functional issues that stem from components being purchased for manufacturing.
- Ensure that all production critical supplier issues are resolved in a timely manner, and corrective actions are implemented correctly.
- Serve as the point of contact for Inspection Plans and Inspection Methods, and provide guidance to Receiving Inspection Auditors.
- Ensuring ongoing site supplier evaluation is performed; This would be achieved by using site information collected from Receiving Inspection, MRB, Customer Returns, SCAR database and by liaison efforts with customer work cells.
- Performance will be reported internally, to the supplier, and to the customer where applicable.
- Perform supplier audit interfacing with Corporate SQE if applicable.
- To provide documentation to perform Inspection of components per Inspection Plans in SAP.
- Monitor and drive PPM issues with the supply base in addition to helping them achieve “Dock to Stock” certified with Jabil (in accordance to the vendor performance system).
- Drive supplier selection strategies that will yield a supply base that can be used across all customer programs providing leverage cost savings.
- Proactively communicate information or issues that may impact the product costs of manufacturability to all affected departments.
- Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
- Comply and follow all procedures within the company security policy.
How Will You Get Here?
Education:
- Bachelor’s degree in Industrial Engineering or related field preferred.
Experience:
- 0-2+ years of experience in Quality or Manufacturing Engineering.
- Or an equivalent combination of education, experience, and/or training.
What Can Jabil Offer You?
Along with growth, stability, and the opportunity to be challenged, Jabil offers a competitive benefits package that includes:
- Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options
- 401K Match
- Employee Stock Purchase Plan
- Paid Time Off
- Tuition Reimbursement
- Life, AD&D, and Disability Insurance
- Commuter Benefits
- Employee Assistance Program
- Pet Insurance
- Adoption Assistance
- Annual Merit Increases
- Community Volunteer Opportunities
temporary
Supplier Quality Engineer - Hands-on technical leadership at the site level (MEMPHIS)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
How Will You Make An Impact?
To be a technical focal point to monitor and work supplier quality issues directly with the manufacturer and communicate status on non-conforming parts/suppliers across all programs. Evaluate supplier performance, determine appropriate Inspection processes and provides guidance to Receiving Inspection function at the site level.
Location:
This role will be based on-site at our Memphis, TN facility.
What Will You Do?
- Serve as the focal person for commodity related quality and functional issues that stem from components being purchased for manufacturing.
- Ensure that all production critical supplier issues are resolved in a timely manner, and corrective actions are implemented correctly.
- Serve as the point of contact for Inspection Plans and Inspection Methods, and provide guidance to Receiving Inspection Auditors.
- Ensuring ongoing site supplier evaluation is performed; This would be achieved by using site information collected from Receiving Inspection, MRB, Customer Returns, SCAR database and by liaison efforts with customer work cells.
- Performance will be reported internally, to the supplier, and to the customer where applicable.
- Perform supplier audit interfacing with Corporate SQE if applicable.
- To provide documentation to perform Inspection of components per Inspection Plans in SAP.
- Monitor and drive PPM issues with the supply base in addition to helping them achieve “Dock to Stock” certified with Jabil (in accordance to the vendor performance system).
- Drive supplier selection strategies that will yield a supply base that can be used across all customer programs providing leverage cost savings.
- Proactively communicate information or issues that may impact the product costs of manufacturability to all affected departments.
- Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
- Comply and follow all procedures within the company security policy.
How Will You Get Here?
Education:
- Bachelor’s degree in Industrial Engineering or related field preferred.
Experience:
- 0-2+ years of experience in Quality or Manufacturing Engineering.
- Or an equivalent combination of education, experience, and/or training.
What Can Jabil Offer You?
Along with growth, stability, and the opportunity to be challenged, Jabil offers a competitive benefits package that includes:
- Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options
- 401K Match
- Employee Stock Purchase Plan
- Paid Time Off
- Tuition Reimbursement
- Life, AD&D, and Disability Insurance
- Commuter Benefits
- Employee Assistance Program
- Pet Insurance
- Adoption Assistance
- Annual Merit Increases
- Community Volunteer Opportunities
To be a technical focal point to monitor and work supplier quality issues directly with the manufacturer and communicate status on non-conforming parts/suppliers across all programs. Evaluate supplier performance, determine appropriate Inspection processes and provides guidance to Receiving Inspection function at the site level.
Location:
This role will be based on-site at our Memphis, TN facility.
What Will You Do?
- Serve as the focal person for commodity related quality and functional issues that stem from components being purchased for manufacturing.
- Ensure that all production critical supplier issues are resolved in a timely manner, and corrective actions are implemented correctly.
- Serve as the point of contact for Inspection Plans and Inspection Methods, and provide guidance to Receiving Inspection Auditors.
- Ensuring ongoing site supplier evaluation is performed; This would be achieved by using site information collected from Receiving Inspection, MRB, Customer Returns, SCAR database and by liaison efforts with customer work cells.
- Performance will be reported internally, to the supplier, and to the customer where applicable.
- Perform supplier audit interfacing with Corporate SQE if applicable.
- To provide documentation to perform Inspection of components per Inspection Plans in SAP.
- Monitor and drive PPM issues with the supply base in addition to helping them achieve “Dock to Stock” certified with Jabil (in accordance to the vendor performance system).
- Drive supplier selection strategies that will yield a supply base that can be used across all customer programs providing leverage cost savings.
- Proactively communicate information or issues that may impact the product costs of manufacturability to all affected departments.
- Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
- Comply and follow all procedures within the company security policy.
How Will You Get Here?
Education:
- Bachelor’s degree in Industrial Engineering or related field preferred.
Experience:
- 0-2+ years of experience in Quality or Manufacturing Engineering.
- Or an equivalent combination of education, experience, and/or training.
What Can Jabil Offer You?
Along with growth, stability, and the opportunity to be challenged, Jabil offers a competitive benefits package that includes:
- Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options
- 401K Match
- Employee Stock Purchase Plan
- Paid Time Off
- Tuition Reimbursement
- Life, AD&D, and Disability Insurance
- Commuter Benefits
- Employee Assistance Program
- Pet Insurance
- Adoption Assistance
- Annual Merit Increases
- Community Volunteer Opportunities
temporary
Production Planner - Memphis, TN
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Production Planner
Location: Jabil Memphis
The Production Planner is the starting point for all materials and production planning activities. This role is responsible for managing customer demand, driving requisitions for buyers, and ensuring the production floor has the materials needed to meet schedule requirements. The planner serves as the primary point of contact between Jabil and the customer’s materials leadership, requiring strong communication and collaboration skills.
This position is approximately 60% desk-based planning and 40% floor-based coordination, requiring comfort working directly with materials technicians and production supervisors.
What can you expect to do?
- Serve as the customer-facing liaison for demand planning and shipment coordination.
- Manage demand signals and translate them into actionable requisitions for the purchasing team.
- Use and navigate three planning systems: SAP, PRISM, and Asprova.
- Collaborate with the production floor team to ensure timely material availability, understand shortages, and track material arrival dates.
- Work directly on the production floor with materials technicians and their supervisors to resolve issues and maintain schedule integrity.
- Maintain and analyze Bills of Materials (BOMs) and Engineering Change Notices (ECNs).
- Monitor and present planning metrics to Business Units (BU) and drive continuous improvement.
- Re-evaluate min/max levels for bulk materials to optimize inventory and production flow.
- Collaborate cross-functionally with buyers, production teams, and customer contacts to ensure alignment and responsiveness.
- Comply with all company policies and procedures, including security and operational standards.
- May perform other duties and responsibilities as assigned.
What is the experience needed to be successful in this role?
- Bachelor’s degree preferred but not required in Supply Chain, Business, Engineering, or related field.
- Thorough knowledge of ERP/MRP systems; experience with SAP, PRISM, and Asprova preferred.
- 2+ years of production planning experience in a manufacturing environment.
- Experience working with metal commodities such as copper, steel, and hardware is preferred.
- Advanced PC skills including Microsoft Office; intermediate Excel skills required.
- Strong understanding of BOMs and ECNs in a high-volume, multi-part environment.
- Ability to read and interpret technical documents and procedures.
- Strong verbal and written communication skills, especially in customer-facing scenarios.
- Ability to work with cross-functional teams and solve problems involving multiple variables.
- Strong analytical skills including basic algebra, geometry, and business math.
- Proficient in logistics planning to support business goals and drive strategic execution.
- Comfortable working in both office and production floor environments.
Benefits Package with Jabil
Along with growth, stability, and the opportunity to be challenged, Jabil offers a competitive benefits package that includes:
- Competitive Base Salary
- Site Performance Bonus
- Long Term Incentives
- Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options
- 401K Match
- Employee Stock Purchase Plan
- Paid Time Off
- Tuition Reimbursement
- Life, AD&D, and Disability Insurance
- Commuter Benefits
- Employee Assistance Program
- Pet Insurance
- Adoption Assistance
- Annual Merit Increases
- Community Volunteer Opportunities
Location: Jabil Memphis
The Production Planner is the starting point for all materials and production planning activities. This role is responsible for managing customer demand, driving requisitions for buyers, and ensuring the production floor has the materials needed to meet schedule requirements. The planner serves as the primary point of contact between Jabil and the customer’s materials leadership, requiring strong communication and collaboration skills.
This position is approximately 60% desk-based planning and 40% floor-based coordination, requiring comfort working directly with materials technicians and production supervisors.
What can you expect to do?
- Serve as the customer-facing liaison for demand planning and shipment coordination.
- Manage demand signals and translate them into actionable requisitions for the purchasing team.
- Use and navigate three planning systems: SAP, PRISM, and Asprova.
- Collaborate with the production floor team to ensure timely material availability, understand shortages, and track material arrival dates.
- Work directly on the production floor with materials technicians and their supervisors to resolve issues and maintain schedule integrity.
- Maintain and analyze Bills of Materials (BOMs) and Engineering Change Notices (ECNs).
- Monitor and present planning metrics to Business Units (BU) and drive continuous improvement.
- Re-evaluate min/max levels for bulk materials to optimize inventory and production flow.
- Collaborate cross-functionally with buyers, production teams, and customer contacts to ensure alignment and responsiveness.
- Comply with all company policies and procedures, including security and operational standards.
- May perform other duties and responsibilities as assigned.
What is the experience needed to be successful in this role?
- Bachelor’s degree preferred but not required in Supply Chain, Business, Engineering, or related field.
- Thorough knowledge of ERP/MRP systems; experience with SAP, PRISM, and Asprova preferred.
- 2+ years of production planning experience in a manufacturing environment.
- Experience working with metal commodities such as copper, steel, and hardware is preferred.
- Advanced PC skills including Microsoft Office; intermediate Excel skills required.
- Strong understanding of BOMs and ECNs in a high-volume, multi-part environment.
- Ability to read and interpret technical documents and procedures.
- Strong verbal and written communication skills, especially in customer-facing scenarios.
- Ability to work with cross-functional teams and solve problems involving multiple variables.
- Strong analytical skills including basic algebra, geometry, and business math.
- Proficient in logistics planning to support business goals and drive strategic execution.
- Comfortable working in both office and production floor environments.
Benefits Package with Jabil
Along with growth, stability, and the opportunity to be challenged, Jabil offers a competitive benefits package that includes:
- Competitive Base Salary
- Site Performance Bonus
- Long Term Incentives
- Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options
- 401K Match
- Employee Stock Purchase Plan
- Paid Time Off
- Tuition Reimbursement
- Life, AD&D, and Disability Insurance
- Commuter Benefits
- Employee Assistance Program
- Pet Insurance
- Adoption Assistance
- Annual Merit Increases
- Community Volunteer Opportunities
permanent
Supplier Quality Engineer
🏢 JABIL CIRCUIT, INC
Salary not disclosed
How Will You Make An Impact?
To be a technical focal point to monitor and work supplier quality issues directly with the manufacturer and communicate status on non-conforming parts/suppliers across all programs. Evaluate supplier performance, determine appropriate Inspection processes and provides guidance to Receiving Inspection function at the site level.
Location:
This role will be based on-site at our Memphis, TN facility.
What Will You Do?
- Serve as the focal person for commodity related quality and functional issues that stem from components being purchased for manufacturing.
- Ensure that all production critical supplier issues are resolved in a timely manner, and corrective actions are implemented correctly.
- Serve as the point of contact for Inspection Plans and Inspection Methods, and provide guidance to Receiving Inspection Auditors.
- Ensuring ongoing site supplier evaluation is performed; This would be achieved by using site information collected from Receiving Inspection, MRB, Customer Returns, SCAR database and by liaison efforts with customer work cells.
- Performance will be reported internally, to the supplier, and to the customer where applicable.
- Perform supplier audit interfacing with Corporate SQE if applicable.
- To provide documentation to perform Inspection of components per Inspection Plans in SAP.
- Monitor and drive PPM issues with the supply base in addition to helping them achieve “Dock to Stock” certified with Jabil (in accordance to the vendor performance system).
- Drive supplier selection strategies that will yield a supply base that can be used across all customer programs providing leverage cost savings.
- Proactively communicate information or issues that may impact the product costs of manufacturability to all affected departments.
- Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
- Comply and follow all procedures within the company security policy.
How Will You Get Here?
Education:
- Bachelor’s degree in Industrial Engineering or related field preferred.
Experience:
- 0-2+ years of experience in Quality or Manufacturing Engineering.
- Or an equivalent combination of education, experience, and/or training.
What Can Jabil Offer You?
Along with growth, stability, and the opportunity to be challenged, Jabil offers a competitive benefits package that includes:
- Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options
- 401K Match
- Employee Stock Purchase Plan
- Paid Time Off
- Tuition Reimbursement
- Life, AD&D, and Disability Insurance
- Commuter Benefits
- Employee Assistance Program
- Pet Insurance
- Adoption Assistance
- Annual Merit Increases
- Community Volunteer Opportunities
To be a technical focal point to monitor and work supplier quality issues directly with the manufacturer and communicate status on non-conforming parts/suppliers across all programs. Evaluate supplier performance, determine appropriate Inspection processes and provides guidance to Receiving Inspection function at the site level.
Location:
This role will be based on-site at our Memphis, TN facility.
What Will You Do?
- Serve as the focal person for commodity related quality and functional issues that stem from components being purchased for manufacturing.
- Ensure that all production critical supplier issues are resolved in a timely manner, and corrective actions are implemented correctly.
- Serve as the point of contact for Inspection Plans and Inspection Methods, and provide guidance to Receiving Inspection Auditors.
- Ensuring ongoing site supplier evaluation is performed; This would be achieved by using site information collected from Receiving Inspection, MRB, Customer Returns, SCAR database and by liaison efforts with customer work cells.
- Performance will be reported internally, to the supplier, and to the customer where applicable.
- Perform supplier audit interfacing with Corporate SQE if applicable.
- To provide documentation to perform Inspection of components per Inspection Plans in SAP.
- Monitor and drive PPM issues with the supply base in addition to helping them achieve “Dock to Stock” certified with Jabil (in accordance to the vendor performance system).
- Drive supplier selection strategies that will yield a supply base that can be used across all customer programs providing leverage cost savings.
- Proactively communicate information or issues that may impact the product costs of manufacturability to all affected departments.
- Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
- Comply and follow all procedures within the company security policy.
How Will You Get Here?
Education:
- Bachelor’s degree in Industrial Engineering or related field preferred.
Experience:
- 0-2+ years of experience in Quality or Manufacturing Engineering.
- Or an equivalent combination of education, experience, and/or training.
What Can Jabil Offer You?
Along with growth, stability, and the opportunity to be challenged, Jabil offers a competitive benefits package that includes:
- Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options
- 401K Match
- Employee Stock Purchase Plan
- Paid Time Off
- Tuition Reimbursement
- Life, AD&D, and Disability Insurance
- Commuter Benefits
- Employee Assistance Program
- Pet Insurance
- Adoption Assistance
- Annual Merit Increases
- Community Volunteer Opportunities
permanent
Maintenance Engineering
🏢 JABIL CIRCUIT, INC
$55,900 - 89,400
JOB SUMMARY
Industrial Engineer I will support the Industrial Engineering Department in planning, designing, implementing and managing; integrated, production and service delivery systems that assure performance, reliability, maintainability, schedule adherence and cost control within the production site.
Main focus: conducts studies to determine the most efficient sequence of operations and workflow and recommends methods for maximum utilization of production equipment and personnel.
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Monitor and continuously improve daily quality/efficiency performance for assigned areas.
· Design and procure production tooling, processing equipment and workstations.
· Coordinate layout and workstation move activities.
· Prepares time estimates for proposed projects and evaluates time factors.
· Minimize change over time by ensuring programs use common set-ups where possible.
· Verify that machine maintenance is being performed on schedule.
· Reduce machine-generated scrap by monitoring machine management data and taking corrective action to improve or correct the operations.
· Reduce manual assembly scrap by monitoring quality data and taking corrective action to improve or correct the operations.
· Analyzes work force utilization, facility layout, and operational data such as production costs, process flow charts, and production schedules, to determine efficient utilization of workers and equipment.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Key Requirements:
o Understanding and application of broad range of industrial engineering tools (ie. Work measurement, process mapping, facilities and workstation design, etc.)
o Understanding of Jabil’s global strategies and direction
o Understanding of site’s facilities, capabilities and how they tie back to the Jabil strategies and direction
o Strong analytical ability
o Able to implement continuous improvements and cost reduction programs
o Good communication skills
· Proficiency in use of personal computers, Microsoft Office products, Microsoft Visio, Microsoft Project, and AutoCAD skills required.
Industrial Engineer I will support the Industrial Engineering Department in planning, designing, implementing and managing; integrated, production and service delivery systems that assure performance, reliability, maintainability, schedule adherence and cost control within the production site.
Main focus: conducts studies to determine the most efficient sequence of operations and workflow and recommends methods for maximum utilization of production equipment and personnel.
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Monitor and continuously improve daily quality/efficiency performance for assigned areas.
· Design and procure production tooling, processing equipment and workstations.
· Coordinate layout and workstation move activities.
· Prepares time estimates for proposed projects and evaluates time factors.
· Minimize change over time by ensuring programs use common set-ups where possible.
· Verify that machine maintenance is being performed on schedule.
· Reduce machine-generated scrap by monitoring machine management data and taking corrective action to improve or correct the operations.
· Reduce manual assembly scrap by monitoring quality data and taking corrective action to improve or correct the operations.
· Analyzes work force utilization, facility layout, and operational data such as production costs, process flow charts, and production schedules, to determine efficient utilization of workers and equipment.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Key Requirements:
o Understanding and application of broad range of industrial engineering tools (ie. Work measurement, process mapping, facilities and workstation design, etc.)
o Understanding of Jabil’s global strategies and direction
o Understanding of site’s facilities, capabilities and how they tie back to the Jabil strategies and direction
o Strong analytical ability
o Able to implement continuous improvements and cost reduction programs
o Good communication skills
· Proficiency in use of personal computers, Microsoft Office products, Microsoft Visio, Microsoft Project, and AutoCAD skills required.
temporary
Maintenance & Engineering Manage
🏢 JABIL CIRCUIT, INC
$55,900 - 89,400
JOB SUMMARY
Industrial Engineer I will support the Industrial Engineering Department in planning, designing, implementing and managing; integrated, production and service delivery systems that assure performance, reliability, maintainability, schedule adherence and cost control within the production site.
Main focus: conducts studies to determine the most efficient sequence of operations and workflow and recommends methods for maximum utilization of production equipment and personnel.
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Monitor and continuously improve daily quality/efficiency performance for assigned areas.
· Design and procure production tooling, processing equipment and workstations.
· Coordinate layout and workstation move activities.
· Prepares time estimates for proposed projects and evaluates time factors.
· Minimize change over time by ensuring programs use common set-ups where possible.
· Verify that machine maintenance is being performed on schedule.
· Reduce machine-generated scrap by monitoring machine management data and taking corrective action to improve or correct the operations.
· Reduce manual assembly scrap by monitoring quality data and taking corrective action to improve or correct the operations.
· Analyzes work force utilization, facility layout, and operational data such as production costs, process flow charts, and production schedules, to determine efficient utilization of workers and equipment.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Key Requirements:
o Understanding and application of broad range of industrial engineering tools (ie. Work measurement, process mapping, facilities and workstation design, etc.)
o Understanding of Jabil’s global strategies and direction
o Understanding of site’s facilities, capabilities and how they tie back to the Jabil strategies and direction
o Strong analytical ability
o Able to implement continuous improvements and cost reduction programs
o Good communication skills
· Proficiency in use of personal computers, Microsoft Office products, Microsoft Visio, Microsoft Project, and AutoCAD skills required.
Industrial Engineer I will support the Industrial Engineering Department in planning, designing, implementing and managing; integrated, production and service delivery systems that assure performance, reliability, maintainability, schedule adherence and cost control within the production site.
Main focus: conducts studies to determine the most efficient sequence of operations and workflow and recommends methods for maximum utilization of production equipment and personnel.
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Monitor and continuously improve daily quality/efficiency performance for assigned areas.
· Design and procure production tooling, processing equipment and workstations.
· Coordinate layout and workstation move activities.
· Prepares time estimates for proposed projects and evaluates time factors.
· Minimize change over time by ensuring programs use common set-ups where possible.
· Verify that machine maintenance is being performed on schedule.
· Reduce machine-generated scrap by monitoring machine management data and taking corrective action to improve or correct the operations.
· Reduce manual assembly scrap by monitoring quality data and taking corrective action to improve or correct the operations.
· Analyzes work force utilization, facility layout, and operational data such as production costs, process flow charts, and production schedules, to determine efficient utilization of workers and equipment.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Key Requirements:
o Understanding and application of broad range of industrial engineering tools (ie. Work measurement, process mapping, facilities and workstation design, etc.)
o Understanding of Jabil’s global strategies and direction
o Understanding of site’s facilities, capabilities and how they tie back to the Jabil strategies and direction
o Strong analytical ability
o Able to implement continuous improvements and cost reduction programs
o Good communication skills
· Proficiency in use of personal computers, Microsoft Office products, Microsoft Visio, Microsoft Project, and AutoCAD skills required.
temporary
Electrical Engineer
🏢 JABIL CIRCUIT, INC
Salary not disclosed
How will you make an impact?
Familiar with technologies specific to area of competence. Can convey technical solutions for areas of competence both to other engineers and to business personnel. Work with engineering team to develop final product solution for chosen architecture within time and cost constraints.
What will you do?
- Assist Senior or Lead Design Engineer in the Development and utilization of processes for Electrical Hardware requirement analysis and documentation, Design documentation and requirements management.
- Assist Senior or Lead Design Engineer in providing Document Control with a complete design package consisting of requirements and design documentation, schematics, BOM’s, vendor lists, and conceptual packaging and assembly drawings prior to production launch.
- Participate in elements of design engineering including design reviews and design verification.
- Follow engineering department design flow processes and procedures.
- Provide input to identification and mitigation of technical project risks, technical and integration dependencies affecting overall project plans and schedules.
- Support production discrepancies by incorporating fixes into subsequent revisions in a timely manner.
- · Assigned to projects of diverse scope, where analysis of situations or data requires an evaluation of identifiable factors.
- Comply and follow all procedures within the company security and safety policies
- May perform other duties and responsibilities as assigned.
How will you get here?
Education:
Bachelor's degree in electrical engineering or related degree or an equivalent combination of educa
Experience:
- 2-5 years of electrical engineering in manufacturing.
- Ability to read, interpret, and execute schematics
- Must be able to lead techs and manufacturing personal
- Strong communication and training skills
- Must have experience electrical concepts such as wiring layouts, electrical design
- AutoCAD or SolidWorks
Knowledge, Skills, Abilities:
- Solid understanding or experience of electronics and circuit design.
- Solid understanding or experience of microprocessors and general digital design.
- Ability to learn high speed circuit board design, design for manufacturability, and performing timing analysis for logic design.
- Familiar or experience with FPGA and CPLDs using VHDL.
- Familiar or experience in schematic entry ECAD tools.
- Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.
- Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
- Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
- Ability to define problems, collect data, establish facts, and draw valid conclusions.
- Ability to operate a personal computer including using a Windows based operating system and related software.
- Advanced PC skills, including training and knowledge of Jabil’s software packages.
- Ability to write simple correspondence. Read and understand visual aid.
- Ability to apply common sense understanding to carry out simple one- or two-step instructions.
- Ability to deal with standardized situations with only occasional or no variables.
- Ability to read and comprehend simple instructions, short correspondence, and memos.
- Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
- Ability to compute rate, ratio, and percent and to draw and interpret graphs
What can Jabil offer you?
Along with growth, stability, and the opportunity to be challenged, Jabil offers a competitive benefits package that includes:
- Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options
- 401K Match
- Employee Stock Purchase Plan
- Paid Time Off
- Tuition Reimbursement
- Life, AD&D, and Disability Insurance
- Commuter Benefits
- Employee Assistance Program
- Pet Insurance
- Adoption Assistance
- Annual Merit Increases
- Community Volunteer Opportunities
Apply Today!
permanent
Quality Engineer
🏢 JABIL CIRCUIT, INC
Salary not disclosed
SUMMARY
To assist the Quality Assurance function as technical support in issues affecting manufacturing. To support and drive corrective action efforts.
· Perform first article inspection and review visual aids.
· Perform defect analysis reporting.
· Perform MRB on sustained products.
· Participate in CAC meetings – support continuous improvement.
· Perform line and product audits.
· Assist Quality Engineering in APQP.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy. MINIMUM REQUIREMENTS
Bachelor's degree preferred; or equivalent combination of education and experience.
permanent
Quality Engineering and Assurance
🏢 JABIL CIRCUIT, INC
$55,900 - 89,400
SUMMARY
To assist the Quality Assurance function as technical support in issues affecting manufacturing. To support and drive corrective action efforts.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.
· Ensure capability studies are performed on critical processes.
· Perform first article inspection and review visual aids.
· Perform defect analysis reporting.
· Perform MRB on sustained products.
· Participate in CAC meetings – support continuous improvement.
· Perform line and product audits.
· Assist Quality Engineering in APQP.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
MINIMUM REQUIREMENTS
Bachelor's degree preferred; or equivalent combination of education and experience.
To assist the Quality Assurance function as technical support in issues affecting manufacturing. To support and drive corrective action efforts.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.
· Ensure capability studies are performed on critical processes.
· Perform first article inspection and review visual aids.
· Perform defect analysis reporting.
· Perform MRB on sustained products.
· Participate in CAC meetings – support continuous improvement.
· Perform line and product audits.
· Assist Quality Engineering in APQP.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
MINIMUM REQUIREMENTS
Bachelor's degree preferred; or equivalent combination of education and experience.
temporary
Quality Engineering & Assurance
🏢 JABIL CIRCUIT, INC
$55,900 - 89,400
SUMMARY
To assist the Quality Assurance function as technical support in issues affecting manufacturing. To support and drive corrective action efforts.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.
· Ensure capability studies are performed on critical processes.
· Perform first article inspection and review visual aids.
· Perform defect analysis reporting.
· Perform MRB on sustained products.
· Participate in CAC meetings – support continuous improvement.
· Perform line and product audits.
· Assist Quality Engineering in APQP.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
MINIMUM REQUIREMENTS
Bachelor's degree preferred; or equivalent combination of education and experience.
To assist the Quality Assurance function as technical support in issues affecting manufacturing. To support and drive corrective action efforts.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.
· Ensure capability studies are performed on critical processes.
· Perform first article inspection and review visual aids.
· Perform defect analysis reporting.
· Perform MRB on sustained products.
· Participate in CAC meetings – support continuous improvement.
· Perform line and product audits.
· Assist Quality Engineering in APQP.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
MINIMUM REQUIREMENTS
Bachelor's degree preferred; or equivalent combination of education and experience.
temporary
M
Maintenance Tech II
Salary not disclosed
Job Summary Under minimal supervision, set up, adjust, perform preventative maintenance, troubleshoot, repair, and maintain assigned equipment with responsibility for production and quality.
Job Description Responsibilities: Perform preventive maintenance, routine inspections, and ad-hoc repairs on assigned conveyors, automation, robotics and ancillary equipment as needed Perform routine troubleshooting of assigned out of service equipment and correct issues, act as an escalation point for lower level technicians, and escalate to leadership and/or more senior technicians as needed.
Record all maintenance issues in maintenance log for each line.
Document all work in the computerized maintenance management system (CMMS) and ticketing systems as appropriate and maintain accurate records of all operating logs for fire pumps, generators, HVAC equipment, and other facility systems that are tested on a routine basis.
Mentor all maintenance personnel in developing appropriate skillsets and knowledge of equipment.
Assist maintenance mechanics in work that requires two people or when operational needs demand.
Perform facility/building project work as assigned.
Tasks include, but are not limited to, light bulb/ballast replacement, door repairs, furniture installation, ceiling tile replacement, carpentry duties, plumbing repairs and maintaining operation logs.
Assemble and test equipment to verify correct operation and production.
Analyze and record cause of production delays on daily production reports and initiate procedures to solve equipment malfunctions.
Examine defects and analyze spoilage causes and, where possible, take corrective action and verify the corrective action has eliminated the problems.
Ability to certify on all industrial lift equipment.
Pickers, Reaches, Skates, Booms, Scissor lifts, etc.
Oversee projects as assigned.
Projects will include minor space renovations, inventory management, contractor oversight, and building efficiency improvements.
Oversee, inspect, and monitor the routine maintenance provided by junior engineers.
Will also provide guidance and training as needed.
Required Experience: Education High school diploma or equivalent Work Experience 5 years of experience with conveyor, automation, or robotics equipment repair and maintenance Preferred Qualifications: Associates Degree in Mechatronics, Electrical Engineering Technology, Mechanical Engineering Technology, HVAC, or equivalent.
Graduate of an apprenticeship program or hold current trade certification.
Fundamental understanding of machinery/equipment Basic skill level in multiple computer software packages including Microsoft Excel Experience working with inputs, outputs, and PLC logic systems and ability to troubleshoot these systems
- Willing to travel at least/up to 10% of the time for business purposes (within state and out of state).
Must be willing to learn new equipment as it is brought on-line.
Physical activities necessary to perform one or more essential functions of the position.
Ability to bend, twist, reach, push, lift for extended periods daily Frequently move, lift, carry supplies/equipment up to 50 lbs and may have to occasionally lift up to 75 lbs Must be able to stand for minimum of 8 hours and up to 12 hours for up to 6 days a week Ability to continuously ascend and descend from ladders and stairs, work at heights and/or from a ladder, work from a lying down position, work with your hands above your head Willing to operate material handling equipment (i.e.
fork truck).
- Write documents and reports using writing instruments and computers Read information, often in small print (drawings)
- Follow appropriate safety procedures such as Lock Out/Tag Out, Arc Flash, etc.
and use Personal Protective Equipment (PPE) while maintaining equipment, and ensure a safe work environment by eliminating potential equipment safety hazards Ability to work overtime and must be available for on-call requests as needed Medline Industries, LP, and its subsidiaries, offer a competitive total rewards package, continuing education & training, and tremendous potential with a growing worldwide organization.
The anticipated salary range for this position: $30.00
- $43.50 Hourly The actual salary will vary based on applicant’s location, education, experience, skills, and abilities.
Medline will not pay less than the applicable minimum wage or salary threshold.
Our benefit package includes health insurance, life and disability, 401(k) contributions, paid time off, etc., for employees working 30 or more hours per week on average.
For a more comprehensive list of our benefits please click here .
For roles where employees work less than 30 hours per week, benefits include 401(k) contributions as well as access to the Employee Assistance Program, Employee Resource Groups and the Employee Service Corp.
We’re dedicated to creating a Medline where everyone feels they belong and can grow their career.
We strive to do this by seeking diversity in all forms, acting inclusively, and ensuring that people have tools and resources to perform at their best.
Explore our Belonging page here .
Medline Industries, LP is an equal opportunity employer.
Medline evaluates qualified individuals without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, age, disability, neurodivergence, protected veteran status, marital or family status, caregiver responsibilities, genetic information, or any other characteristic protected by applicable federal, state, or local laws.
Job Description Responsibilities: Perform preventive maintenance, routine inspections, and ad-hoc repairs on assigned conveyors, automation, robotics and ancillary equipment as needed Perform routine troubleshooting of assigned out of service equipment and correct issues, act as an escalation point for lower level technicians, and escalate to leadership and/or more senior technicians as needed.
Record all maintenance issues in maintenance log for each line.
Document all work in the computerized maintenance management system (CMMS) and ticketing systems as appropriate and maintain accurate records of all operating logs for fire pumps, generators, HVAC equipment, and other facility systems that are tested on a routine basis.
Mentor all maintenance personnel in developing appropriate skillsets and knowledge of equipment.
Assist maintenance mechanics in work that requires two people or when operational needs demand.
Perform facility/building project work as assigned.
Tasks include, but are not limited to, light bulb/ballast replacement, door repairs, furniture installation, ceiling tile replacement, carpentry duties, plumbing repairs and maintaining operation logs.
Assemble and test equipment to verify correct operation and production.
Analyze and record cause of production delays on daily production reports and initiate procedures to solve equipment malfunctions.
Examine defects and analyze spoilage causes and, where possible, take corrective action and verify the corrective action has eliminated the problems.
Ability to certify on all industrial lift equipment.
Pickers, Reaches, Skates, Booms, Scissor lifts, etc.
Oversee projects as assigned.
Projects will include minor space renovations, inventory management, contractor oversight, and building efficiency improvements.
Oversee, inspect, and monitor the routine maintenance provided by junior engineers.
Will also provide guidance and training as needed.
Required Experience: Education High school diploma or equivalent Work Experience 5 years of experience with conveyor, automation, or robotics equipment repair and maintenance Preferred Qualifications: Associates Degree in Mechatronics, Electrical Engineering Technology, Mechanical Engineering Technology, HVAC, or equivalent.
Graduate of an apprenticeship program or hold current trade certification.
Fundamental understanding of machinery/equipment Basic skill level in multiple computer software packages including Microsoft Excel Experience working with inputs, outputs, and PLC logic systems and ability to troubleshoot these systems
- Willing to travel at least/up to 10% of the time for business purposes (within state and out of state).
Must be willing to learn new equipment as it is brought on-line.
Physical activities necessary to perform one or more essential functions of the position.
Ability to bend, twist, reach, push, lift for extended periods daily Frequently move, lift, carry supplies/equipment up to 50 lbs and may have to occasionally lift up to 75 lbs Must be able to stand for minimum of 8 hours and up to 12 hours for up to 6 days a week Ability to continuously ascend and descend from ladders and stairs, work at heights and/or from a ladder, work from a lying down position, work with your hands above your head Willing to operate material handling equipment (i.e.
fork truck).
- Write documents and reports using writing instruments and computers Read information, often in small print (drawings)
- Follow appropriate safety procedures such as Lock Out/Tag Out, Arc Flash, etc.
and use Personal Protective Equipment (PPE) while maintaining equipment, and ensure a safe work environment by eliminating potential equipment safety hazards Ability to work overtime and must be available for on-call requests as needed Medline Industries, LP, and its subsidiaries, offer a competitive total rewards package, continuing education & training, and tremendous potential with a growing worldwide organization.
The anticipated salary range for this position: $30.00
- $43.50 Hourly The actual salary will vary based on applicant’s location, education, experience, skills, and abilities.
Medline will not pay less than the applicable minimum wage or salary threshold.
Our benefit package includes health insurance, life and disability, 401(k) contributions, paid time off, etc., for employees working 30 or more hours per week on average.
For a more comprehensive list of our benefits please click here .
For roles where employees work less than 30 hours per week, benefits include 401(k) contributions as well as access to the Employee Assistance Program, Employee Resource Groups and the Employee Service Corp.
We’re dedicated to creating a Medline where everyone feels they belong and can grow their career.
We strive to do this by seeking diversity in all forms, acting inclusively, and ensuring that people have tools and resources to perform at their best.
Explore our Belonging page here .
Medline Industries, LP is an equal opportunity employer.
Medline evaluates qualified individuals without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, age, disability, neurodivergence, protected veteran status, marital or family status, caregiver responsibilities, genetic information, or any other characteristic protected by applicable federal, state, or local laws.
Not Specified
W
HSE Manager, Global Compounds
🏢 Westlake
Salary not disclosed
Summary
Acts independently under only consultative direction from Sr. Management. Works with latitude to plan, direct, and manage the health, safety and environmental programs and policies for a Westlake Business Segment(s). This position will provide oversight on the development of HSE strategies and be responsible for facilitating successful implementation of all HSE programs and policies. One of the main focuses for this position to aid in the reduction of each sites risk profile and raise employee’s awareness regarding HSE matters. This position will lead the applicable HSE management steering team(s) and have direct reports located in NA. This position will provide technical expert support for smaller manufacturing sites and other areas within Westlake Chemical.
Duties and Responsibilities
May include, but are not limited to, the following:
- Uses expert knowledge of scientific principles and concepts to drive the development of the Business Segments HSE policies, standards, and operating guidelines.
- Leads / Managers / Directs a team of HSE Managers ensuring all focused activities are aligned to meet at a minimum all Federal, State, regional and countries laws and regulations specific to site locations in which Westlake operates.
- Acts as an internal authority on all existing and proposed changes in applicable Federal, State, and international laws and regulations related to the field(s) of HSE. .
- Stays abreast of all potential emerging issues related to HSE providing technical analysis and reporting to Sr. Management.
- Responsible for authoring of HSE procedures and policies.
- Responsible for the supporting and facilitating HSE budget for Corporate and site activities. Reviews / facilitates development of strategies and ensures all activities are being completed per recognized regulations to include job specific job tasks.
- Completes data analysis on incidents to include near misses and makes recommendations based on data trends.
- Provides technical expertise and guidance in interpreting and monitoring compliance with regulatory and industry requirements regarding preventive and remedial programs.
- Provides expert health risk assessment advice to operations/maintenance and projects groups to anticipate/identify health hazards and recommend engineering design for effective control of these hazards in modifications, expansions, new projects and plants.
- May be called upon to serve as an expert witness in any potential Health and Safety issue.
- Reviews, evaluates, and prepares replies to technical and management audits.
- Supplies technical inspiration and leadership consultation to professional co-workers.
Education, Experience and Qualifications
- BS Degree in Occupational Safety and Health, Environmental Science, Chemistry with 10 years of experience
- Knowledge Level of regulatory compliance laws (OSHA 1910 – General Industry, OSHA 1926 – Construction, Industrial Hygiene Regulations) and or applicable Environmental Regulations.
- Experience with change management – implementation of new policies/procedures valuable
- Strong facilitation, interpersonal and computer skills, with a good working knowledge of related databases and applications, and excellent verbal and written communication abilities
- Capable of developing and managing multiple projects
- Exhibits positivity, passion, integrity and accountability
- Able to work in a team-oriented environment and lead team projects and collaboration
Physical Demands
While performing the duties of this job, the employee is frequently required to sit, stand, walk and climb; use hands to touch, handle, or feel; reach with hands and arms; and talk or hear. The employee is occasionally required to stoop, kneel, or crouch. The employee must occasionally lift and/or move up to 10 pounds, and infrequently lift and/or move up to 50 lbs. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. The employee must frequently make minor decisions requiring limited judgement, general decisions in the absence of specific directions, and perform activities requiring sustained concentration.
Work Environment
The noise level in the work environment is sometimes moderate when working in an office, however, some of the work may be required in the operating units which mandates usage of required PPE including safety glasses, hearing protection, etc. May also result in exposure to outside elements and may require usage of stairs. Travel may be required occasionally.
Not Specified
A
Environmental Project Manager
Salary not disclosed
Position Summary
A leading infrastructure and environmental services contractor is seeking an experienced Environmental Project Manager to oversee environmental remediation, compliance, and industrial service projects throughout the Southeast.
This role is responsible for managing environmental field operations, client relationships, regulatory compliance, budgets, and project execution. The ideal candidate has a strong background in environmental remediation, industrial services, rail-related environmental work, or heavy civil projects and thrives in a fast-paced, field-driven environment.
Key Responsibilities
- Manage full lifecycle of environmental and remediation projects
- Oversee site assessments, remediation activities, and environmental compliance efforts
- Coordinate field crews, subcontractors, equipment, and materials
- Ensure compliance with federal, state, and local environmental regulations (EPA, OSHA, etc.)
- Prepare and review project scopes, proposals, cost estimates, and schedules
- Monitor budgets and control project costs
- Conduct site visits to ensure safety, quality, and regulatory compliance
- Serve as primary client contact and maintain strong working relationships
- Prepare reports, documentation, and regulatory submissions as required
- Identify risks and develop mitigation strategies to keep projects on track
Qualifications
- 5+ years of experience in environmental project management
- Background in environmental remediation, industrial services, rail environmental support, or related field
- Working knowledge of EPA, OSHA, and environmental compliance standards
- Experience managing multiple field crews and subcontractors
- Strong budgeting and cost-control experience
- Ability to travel regionally to job sites
- Excellent leadership, communication, and problem-solving skills
- Proficiency in Microsoft Office and project management software
Preferred Qualifications
- Experience with rail corridor remediation or industrial site cleanup
- Experience with stormwater, SPCC, soil/groundwater remediation, or hazardous material projects
- PMP certification (preferred but not required)
- Environmental science, engineering, or related degree
Compensation & Benefits
- Competitive salary (based on experience)
- Performance-based bonus opportunities
- Company vehicle or vehicle allowance
- Health, dental, and vision insurance
- 401(k) with company match
- Paid time off
Not Specified
A
Senior Operations Manager
Salary not disclosed
Abacus Solutions Group is currently seeking a Senior Operations Manager for a brand-new warehouse opening in the Southaven, MS area. This role is for a large, growing apparel brand.
Job Summary: The Senior Operations Manager is responsible for leading day-to-day operations within a high-volume, fast-paced fulfillment center. This role ensures safe, efficient, and customer-focused execution across inbound, outbound, and returns operations while driving productivity, quality, and continuous improvement. The Senior Operations Manager plays a critical role in peak execution, people leadership, and operational scalability.
Responsibilities:
- Lead daily operations across inbound receiving, put-away, picking, packing, shipping, and returns.
- Ensure consistent achievement of service level agreements (SLAs) for same-day and next-day order fulfillment.
- Monitor real-time performance and adjust labor and workflows to meet changing demands.
- Lead and Develop Operations Managers, Area Managers, Supervisors, and frontline leaders.
- Drive strong safety performance and ensure compliance with all workplace safety standards.
- Coach leaders on performance management, engagement, and talent development.
- Execute peak-season and promotional event plans, including staffing, training, and shift coverage.
- Manage labor productivity, attendance, and overtime to meet volume requirements.
- Support flex staffing, temporary labor, and cross-training strategies.
- Own operational KPIs such as units per hour, order accuracy, on-time ship rate, and cycle time.
- Conduct root-cause analysis for misses and lead corrective action plans.
- Drive Lean, Six Sigma, and Kaizen initiatives to improve speed, quality, and cost.
- Ensure effective use of WMS, OMS, labor management, and fulfillment technologies.
- Partner with IT and engineering teams to resolve system issues and improve throughput.
- Support rollout and stabilization of automation and process changes.
- Manage departmental labor and operating costs within budget.
- Identify productivity improvements and cost-saving opportunities.
- Support capital and process improvement business cases.
- Partner closely with Transportation, Customer Experience, HR, Maintenance, Engineering, and IT teams.
- Communicate operational status, risks, and performance updates to site leadership.
Qualifications:
- Bachelor’s degree in supply chain, Operations, Business, Engineering, or related field preferred.
- 5–8+ years of progressive operations leaedership experience in e-commerce, fulfillment, or high-volume distribution.
- Experience leading large teams in a multi-shift environment.
- Strong execution in fast-paced, high-change environments.
- Data-driven mindset with strong analytical and problem-solving skills.
- Hands-on leadership style with the ability to coach and develop teams.
- Working knowledge of WMS, labor management systems, and fulfillment KPIs.
- Fulfillment center environment with extended hours and peak-season demands.
- Ability to work nights, weekends, and holidays as required.
- Minimal travel expected.
Compensation: $100K - $125K
Not Specified
M
Supply Chain Operations Manager
Salary not disclosed
Martinrea is a diversified global automotive supplier engaged in the design, development and manufacturing of metal parts, assemblies and modules, complex fluid management systems and aluminum products. We employ approximately 15,000 skilled and motivated people at manufacturing, engineering and technical centers in Canada, the United States, Mexico, Brazil, Germany, Slovakia, Spain and China. Our business strategy leverages world-class technologies, motivated and talented people, and high-quality products.
Our Mission is to make people's lives better by:
- Delivering outstanding quality products and services to our customers.
- Providing meaningful opportunity, job satisfaction, and job security for our people.
- Being positive contributors to our communities; and,
- Providing superior long-term investment returns to our stakeholders.
Our strength is our people
We invite you to follow your dreams and explore a challenging and rewarding career at Martinrea Automotive Structures, Inc., in Tupelo, MS
Job Summary:
- Responsible for plant Procurement and Supply Chain Operations including Production Scheduling, Material Planning, Procurement, Inventory Management, Capacity Management, Shipping & Receiving, Tool Crib (MRO + Spares), Delivery Performance and Customer Service, and overall Material Flow.
Essential Functions:
- Follow all work and safety instructions for all assigned operations
- Develop and Execute Strategies for meeting Supply Chain Operations KPIs including but not limited to; Cost Reductions, On Time Delivery, Inventory Reduction & Freight in accordance with Business Unit Targets
- Meet Corporate Targets and Initiatives related to Inventory Optimization (both Production and MRO)
- Ensure Compliance with Customer Systems and Portals
- Support and Lead MMOG/IATF Requirements
- Develop and Execute Strategies for Purchasing KPIs including but not limited to Cost Savings, Payment Terms, and Supplier Inventory on Consignment Programs in accordance with Business Unit Targets
- Implement and Lead Corporate Purchasing Initiatives (Xeeva, KSA Adoption, OPEX, CRMS, Roadmaps, etc.)
- Negotiate favorable supply contracts with key suppliers
- Responsible for sourcing & resourcing activity within the plant and presenting to Division level for approval
- Lead Materials/Purchasing Related Launch Activities to support new business awards as required
- Ability to Provide Input to and Execute Commodity and Supplier Strategies
- Maintain supplier rating system continuously evaluating supplier's delivery and quality performance
- Work with under-performing suppliers to improve, or locate alternate supplier
- Develop Actions to Achieve & Maintain Absolute Accuracy targets and achieve Net Accuracy on Inventory Cycle Counts and Physical Inventory Activities
- Mentor other personnel in the department and assist in their development
- Communicate with all areas of the plant to ensure the needs of the company are being fulfilled through purchasing
- Ensure New Business Supplier Product Launches on time, on cost, on specification
- Ability to Manage a Team of People and Delegate Tasks based on roles, responsibilities and workload
- Abide by all Company policies including, but not limited to the following: Health and Safety, Quality and Environmental Systems, Human Resources policies, and the Martinrea Employee Handbook
Required Education and Experience:
- Bachelor's Degree or Post-Secondary Diploma preferred in the following:
- Supply Chain Management
- Business Administration
- 5+ Years Experience in a related manufacturing or logistics management role
- Experience with ERP/MRP Systems (Epicor CMS an asset)
- Experience in a fast-paced manufacturing environment preferred
- Experience negotiating complex contracts with suppliers
- Fluent in Microsoft Office (Excel, Word, Outlook etc.)
- Travel required
Benefits:
- Work in a great team environment
- Medical, Dental and Vision Insurance
- 401K
- Safety Shoes and Prescription Glasses Reimbursement
- Supplier discounts
- Training opportunities
Job Type: Full time
Not Specified
H
Vision Systems Engineer
Salary not disclosed
Company Overview:
Howard Industries, Inc. is the nation's leading manufacturer of distribution transformers, with over 10 million overhead, single-phase and three-phase pad mounted, and network transformers in service throughout the United States and abroad. As Mississippi's largest privately held employer headquartered within the state, the company employs over 5,000 team members, generates over $1 billion in revenue, and consists of three main corporate divisions: Howard Power Solutions, Howard Transportation, and Howard Technology Solutions.
Vision Systems Engineer (AI Specialist)
We are seeking a highly skilled Vision Systems Engineer to lead the integration and optimization of advanced automated inspection systems within our high-volume, high-mix heavy manufacturing facility.
In this role, you will be the subject matter expert for AI vision platforms, leveraging both 2D and 3D imaging to solve complex inspection challenges. You will work in a fast-paced environment where precision is critical, ensuring every component—from massive structural parts to small identification decals—meets our rigorous quality standards.
Key Responsibilities
- System Design & Integration: Architect, program, and deploy vision solutions utilizing AI-driven toolsets for complex defect detection.
- 2D & 3D Implementation: Configure 2D cameras for AI based analysis and 3D lasers for volumetric analysis and defect detection.
- Automated Inspection Tasks:
- Part Location: Develop robust \"Search\" and \"Shape Trailing\" logic to locate heavy components on high-volume lines.
- Decal & Placement Verification: Utilize AI learning to verify the presence, orientation, and correct application of decals and labels.
- Cosmetic Defect Detection: Train AI models to distinguish between acceptable surface variations and true cosmetic flaws (scratches, dents, or coating irregularities) on diverse materials.
- OCR/OCV: Implement high-reliability reading of metal-stamped or printed nameplates and VIN plates in challenging industrial lighting.
- Hardware Specification: Select appropriate lighting (backlights, ring lights, coaxial), lenses, and mounting bracketry to withstand heavy manufacturing environments.
- Continuous Improvement: Analyze inspection data to reduce \"false rejects\" and improve \"overkill\" rates using statistical analysis tools.
Required Qualifications
- Bachelors Degree: Mechanical Engineering, Electrical Engineering, Industrial Engineering, Computer Engineering, or Software Engineering
- Technical Expertise: Minimum 3–5 years of hands-on experience with Vision Systems
- 3D Vision: Proven experience with 3D laser profilers or area sensors for Z-axis measurement and inspection.
- 2D Vision: Proven experience utilizing 2D cameras to train AI learning models to detect defects.
- Manufacturing Background: Experience in a heavy manufacturing or automotive environment; comfortable working around large-scale automation and robotics.
- Problem Solving: Deep understanding of industrial optics, including the physics of light and how to filter out ambient interference in a factory setting.
- Communication: Ability to collaborate with PLC Engineers (Allen-Bradley) to integrate vision data into the broader automation cell.
Preferred Skills
- Experience with Zebra, Keyence, Cognex, or Sick Vision System technology for quality inspection.
- Knowledge of robotic guidance (linking vision systems to Fanuc, ABB, Yaskawa or Kuka arms).
Not Specified
Program Launch Manager-Plant Liaison
🏢 Akkodis
Salary not disclosed
Akkodis is recruiting for a Program Launch Manager - Plant Liaison for a defense manufacturer in the West Coast, MS area. This is a contract to hire position with a pay range of $53 an hour to $60 an hour depending on the experience, education and location. The Program Launch Manager – Plant Liaison will be responsible for overseeing the successful introduction of new products and processes within the manufacturing plant ensuring that all operational and technical requirements are met. This includes leading, coordinating and integrating all cross-functional activities to ensure the successful execution and outcome of military and commercial contracts in the manufacturing plant including potential capital improvements.
- Lead the planning and execution of launches ensuring alignment with business goals and timelines. Develop and manage detailed program timelines and build schedules aligned with internal and customer requirements and ensuring adherence to milestones and deliverables including cost, schedule and quality assurance.
- Serves as the primary interface between the Company and the Customer during the execution of assigned programs to keep both informed.
- Coordinate with supply chain, engineering, and operations to ensure material availability and readiness.
- Oversee the PO's/invoices, schedules, floor set up, timelines and other on site tasks for all plant contracts
- Must possess a BS degree in a related field (Engineering, Business, Project Management, etc).
- 3-5 years program management experience in manufacturing launches
- PMP or similar certification preferred
- Aerospace, Automotive or Defense experience preferred
- Strong understanding of production processes and manufacturing.
- Excellent communication and interpersonal skills to effectively lead, collaborate and participate in cross-functional Integrated Project Teams (IPTs).
If interested, please forward resume to
Equal Opportunity Employer/Veterans/Disabled
Military connected talent encouraged to apply
Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable.
To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable:
• The California Fair Chance Act
• Los Angeles City Fair Chance Ordinance
• Los Angeles County Fair Chance Ordinance for Employers
• San Francisco Fair Chance Ordinance
Not Specified
jobs by
