Engineering Jobs in Vernon Connecticut
22 positions found — Page 2
P
Final Inspector
Salary not disclosed
Title
Final Inspector
About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.
EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.
Description
Position Requirements
Shift
Days
Full-Time/Part-Time
-unspecified-
Location
Applied Aerospace & Defense, Manchester
Category
Quality Control
Req Number
QUA-25-00032
Position
Final Inspector
Close Date
Post Internal Days
0
Number of Openings
1
Exempt/Non-Exempt
Non-Exempt
Hiring Manager(s)
Final Inspector
About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.
EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.
Description
The Final Inspector position is primarily responsible for inspecting and recording dimensions of aerospace components per process sheets, Inspection reports, Blueprints and applicable specifications utilizing specified gages and methods to ensure the quality requirements are met prior to presenting the final aerospace component to the customers.
Responsibilities:
- Review all raw material and processing certifications IAW Customer and PO requirements.
- Utilize Material Release database to document quality review/activities.
- Visual and dimensional verification (inspection) to requirements utilizing: micrometers, calipers, bore gages, thread gages, and other inspection equipment as required.
- Review and acceptance of Travelers to assure all sign-off complete and revision levels are to Operation Book Requirements.
- Presentation of inspected/received parts to various customer representatives and the resolution to any customer questions or concerns.
- Initiation of Discrepancy Reports, internal and external for products not meeting drawing requirements.
- Perform tasks as assigned by Supervisor and/or Team Leader.
Position Requirements
Physical Requirements:
- Ability to lift 50 lbs.
- Ability to stand or sit for extended period of time.
- Fine motor skills with frequent hand and arm movement.
- Frequent twisting and bending.
Unusual Environmental Conditions:
- Loud machining environment; exposure to aerospace metals, lubricants, and chemicals.
Required Personal Protective Equipment:
- Safety glasses/shields, appropriate manufacturing closed toed footwear, hearing protection may be required or other protective equipment as needed.
Qualifications - Required
- US Citizen
- High School Diploma or equivalent
- Minimum of 1 Year of Aerospace Inspection Experience
- Familiar with ISO / AS9100 requirements and/or Auditing Skills
- Basic math or industrial mathematics desired.
- Good written and verbal skills
- Basic computer skills
- Strong attention to detail and accuracy
- Strong problem-solving skills required
- Strong organizational skills required
Shift
Days
Full-Time/Part-Time
-unspecified-
Location
Applied Aerospace & Defense, Manchester
Category
Quality Control
Req Number
QUA-25-00032
Position
Final Inspector
Close Date
Post Internal Days
0
Number of Openings
1
Exempt/Non-Exempt
Non-Exempt
Hiring Manager(s)
This position is currently accepting applications.
Apply Now
Not Specified
P
NC Programmer
🏢 PCX Aerostructures, LLC
Salary not disclosed
Title
NC Programmer
About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.
EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.
Description
Position Requirements
Shift
Days
Full-Time/Part-Time
Full-Time
Location
Applied Aerospace & Defense, Manchester
Category
Engineering
Req Number
ENG-25-00019
Position
NC Programmer
Close Date
Post Internal Days
0
Number of Openings
3
Exempt/Non-Exempt
Exempt
Hiring Manager(s)
NC Programmer
About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.
EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.
Description
Accountability:
Develop, implement, and troubleshoot CNC program designs. Provide technical expertise in collaboration with functions across the organization to achieve project goals. Work closely with production to solve problems. Use strong analytical design and project management skills along with product expertise to meet customer requirements.
Essential Functions and Duties:
- Prepare computer programs to control CNC machine operations using CAD/CAM terminal (Siemens NX and MasterCam).
- Prepare flow charts, documents and sequence logic and write complete sequence of machine operations necessary to complete cycle.
- Analyze engineering drawings for materials, process fabrication and design elements.
- Specify patterns on programming sheet for way part is to be machined.
- Assure program meets target cycle time and program generates geometry to customer requirements.
- Select appropriate cutting tools, speeds and feeds, tool path application necessary to perform the operation.
- Assist in the concept design of required tools and gages, support changes to existing tools and fixture as improvements are identified.
- Support lean activities both within the Engineering group and across the organization.
Complexity of Tasks:
Requires strong verbal and written communication skills along with advanced interpersonal skills. Strong project management skills are essential. Must be able to collaborate with other departments and functions in achieving project goals. Use available resources to support customer needs and expectations on both a national and international level.
Qualifications:
- Bachelor's Degree in an engineering discipline preferred and/or equivalent experience.
- Ten or more years direct experience in multi-axis programming of Aerospace machining operations and materials.
- Ability to program in appropriate programming language using either a CAD/CAM terminal and/or manually generated.
- 3D modeling sketcher, assemblies, lathe, and drafting capability in Siemens PLM (NX 8.5) or later version
- CAD/CAM software: Siemens NX and MasterCam required
- Full multi-axis (5+) or partial (3+1) and general CNC machining/programming experience with lathes, milling machines, and mill/turns. Grinding experience preferred.
- CG Tech Vericut experience required.
- Capable of debugging programs and working closely with shop floor and inspection personnel.
- Some tool design experience preferred.
- Proper application and knowledge of various cutting tools and holders to efficiently complete program operations.
- Must be a team player and have the ability to work closely in a shop environment.
- Seek ideas for continuous improvement; suggest and encourages innovative ideas to improve current systems and processes.
- Working knowledge of Microsoft office application software to include Word, Excel and PowerPoint required
Position Requirements
Shift
Days
Full-Time/Part-Time
Full-Time
Location
Applied Aerospace & Defense, Manchester
Category
Engineering
Req Number
ENG-25-00019
Position
NC Programmer
Close Date
Post Internal Days
0
Number of Openings
3
Exempt/Non-Exempt
Exempt
Hiring Manager(s)
This position is currently accepting applications.
Apply Now
Not Specified
CNC Machinist - Lathe Operator - Level III - 1st or 2nd Shift
Salary not disclosed
Sets-up and operates CNC Turning, Multi-Axis lathes, and other Turning equipment to produce highly precision component parts that meet all quality standards.
Ability and willingness to train others.
Can work independently and lead a project.
This role is for 1st or 2nd shift.
1st shift is 7am-3:30.
2nd shift is 3:00
- 11:30pm This role is 100% in office at our plant in East Hartford, CT.
At HORST we offer a variety of benefits including but not limited to: Competitive PTO PackagePaid Company Holidays401K Match ProgramMedical, Dental, Vision BenefitsTuition Reimbursement/Assistance Program Major Areas of Responsibility: Set-up and operate CNC Lathes (2-axis and multi-axis) (e.g.
Eurotech, Hardinge, etc.) Will work with blueprints, operation sheets, and other work instructions.
Working from blueprints, operation sheets, travelers or other specifications, set-ups and completes the machining operations to produce a quality part.
Checks to make sure that the material to be used meets all specifications.
Obtains bar stock or material from staging area.
Performs complex set-ups of own work or for others.
Makes all required adjustments to the machinery.
Obtains tooling, gages, inserts and all other equipment needed to complete the set-up and brings up the program.
Edits the program as necessary.
Assists other Operators or Set-up/Operators with set-up or production problems and helps to train other set-up/operators.
Ensures that all manufactured parts are in full compliance to quality standards.
Performs visual inspections (part relationship to operation sheet/blueprint configuration) on all parts produced and performs actual dimensional verification using measuring instruments as per the guidelines established by the department or the Quality Assurance Department.
Replaces all worn or damaged tooling as necessary.
Verifies and records actual part count, both prior to and upon completion of all work Performs all routine maintenance on the equipment and maintains all fluid levels.
Keeps the equipment and work area clean and organized.
Returns excess bar stock or material to the staging area.
Moves the finished work to an assigned area.
Enters all work performed into the database and documents all scrap.
Notifies lead person or supervisor of any parts shortages or machining problems/difficulties.
Packs and washes/preserves parts as needed.
Performs other machining and assembly operations as needed.
Performs other related duties as required.
Interacts with associates from all departments.
Requirements: High School diploma or equivalent.
Technical school training a plus.
3 years of set-up experience minimum required Experience with aerospace products and/or other close tolerance parts is a plus.
Must be familiar with Fanuc and/or Okuma Controls Must be able to set and change tools.
Must be able to use standard gauges and inspection techniques.
Experience with SPC, inspection documentation, and problem solving is a plus.
Strong interpersonal and analytical skills.
Must be able to read and write comments, understand operation sheets/blueprints, specifications, and all applicable company/customer paperwork.
Must be able to read CNC programs.
Five plus years of increasingly diverse experience in a machine shop or CNC machining environment Physical Requirements: Ability to push/pull/carry up to 50 lbs.
Able to stand for up to 8 hours.
PIe4204bd7e1eb-6932
Ability and willingness to train others.
Can work independently and lead a project.
This role is for 1st or 2nd shift.
1st shift is 7am-3:30.
2nd shift is 3:00
- 11:30pm This role is 100% in office at our plant in East Hartford, CT.
At HORST we offer a variety of benefits including but not limited to: Competitive PTO PackagePaid Company Holidays401K Match ProgramMedical, Dental, Vision BenefitsTuition Reimbursement/Assistance Program Major Areas of Responsibility: Set-up and operate CNC Lathes (2-axis and multi-axis) (e.g.
Eurotech, Hardinge, etc.) Will work with blueprints, operation sheets, and other work instructions.
Working from blueprints, operation sheets, travelers or other specifications, set-ups and completes the machining operations to produce a quality part.
Checks to make sure that the material to be used meets all specifications.
Obtains bar stock or material from staging area.
Performs complex set-ups of own work or for others.
Makes all required adjustments to the machinery.
Obtains tooling, gages, inserts and all other equipment needed to complete the set-up and brings up the program.
Edits the program as necessary.
Assists other Operators or Set-up/Operators with set-up or production problems and helps to train other set-up/operators.
Ensures that all manufactured parts are in full compliance to quality standards.
Performs visual inspections (part relationship to operation sheet/blueprint configuration) on all parts produced and performs actual dimensional verification using measuring instruments as per the guidelines established by the department or the Quality Assurance Department.
Replaces all worn or damaged tooling as necessary.
Verifies and records actual part count, both prior to and upon completion of all work Performs all routine maintenance on the equipment and maintains all fluid levels.
Keeps the equipment and work area clean and organized.
Returns excess bar stock or material to the staging area.
Moves the finished work to an assigned area.
Enters all work performed into the database and documents all scrap.
Notifies lead person or supervisor of any parts shortages or machining problems/difficulties.
Packs and washes/preserves parts as needed.
Performs other machining and assembly operations as needed.
Performs other related duties as required.
Interacts with associates from all departments.
Requirements: High School diploma or equivalent.
Technical school training a plus.
3 years of set-up experience minimum required Experience with aerospace products and/or other close tolerance parts is a plus.
Must be familiar with Fanuc and/or Okuma Controls Must be able to set and change tools.
Must be able to use standard gauges and inspection techniques.
Experience with SPC, inspection documentation, and problem solving is a plus.
Strong interpersonal and analytical skills.
Must be able to read and write comments, understand operation sheets/blueprints, specifications, and all applicable company/customer paperwork.
Must be able to read CNC programs.
Five plus years of increasingly diverse experience in a machine shop or CNC machining environment Physical Requirements: Ability to push/pull/carry up to 50 lbs.
Able to stand for up to 8 hours.
PIe4204bd7e1eb-6932
Not Specified
J
Mastercam Programmer and Set-Up Machinist (Milling)
🏢 Jobot
Salary not disclosed
Senior CNC Programmer | 4 & 5-Axis | Automation & Pallet Systems This Jobot Job is hosted by: Jamie Beene Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.
Salary: $38
- $50 per hour A bit about us: Founded nearly a century ago and based in South Windsor, Connecticut, we design and manufacture highly engineered components for aerospace and mission-critical applications, with additional operations across multiple U.S.
locations.
We are a precision-driven manufacturing organization where advanced machining, automation, and continuous improvement are core to how we operate.
Our teams work closely across engineering, operations, and production to deliver high-quality parts in a safety-focused, collaborative environment.
Why join us? Competitive Compensation: Hourly rate based on experience, with annual discretionary bonus eligibility Comprehensive Benefits: Medical, Dental, Vision, HSA/FSA, Life Insurance Retirement: 401(k) with company contribution Work-Life Balance: Monday–Thursday schedule with every other Friday off early High-Impact Role: Own programming strategy across advanced CNC equipment Modern Manufacturing: Automation, pallet changers, horizontal machining centers Stable, Growing Organization: Long-standing manufacturer with strong market demand Onsite Collaboration: Direct interaction with machinists, operators, and leadership Job Details Key Responsibilities and Duties: Program CNC turning and milling centers based on engineering drawings and specifications Create 3D models from drawings using Mastercam Develop efficient sequences of operations and optimal fixturing strategies Select and optimize tooling, cutters, and holders for quality and cycle time improvement Manage CNC program configuration control and revision accuracy Improve existing programs to enhance efficiency, quality, and throughput Communicate directly with machinists and operators on setup and program effectiveness Deploy CNC programs through the Visual ERP work order system Support cost estimating with setup and machining time estimates Generate work instructions and process sheets for operators Assist operators during setup and troubleshooting as needed Maintain accurate job records and documentation Follow all safety rules, PPE requirements, and housekeeping standards Collaborate cross-functionally to meet department and company goals Qualifications Needed: High School Diploma or equivalent Minimum 5 years of CNC programming experience Strong experience programming CNC lathes and milling machines Required: 4-Axis programming experience Preferred: 5-Axis programming experience Experience with machine automation and pallet changing systems Background with horizontal machining centers Proven fixture design and implementation experience Strong tooling knowledge and optimization skills Ability to program and support multiple machines simultaneously Ability to work independently with minimal supervision Strong communication, teamwork, and problem-solving skills U.S.
Person status required per export control regulations Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Salary: $38
- $50 per hour A bit about us: Founded nearly a century ago and based in South Windsor, Connecticut, we design and manufacture highly engineered components for aerospace and mission-critical applications, with additional operations across multiple U.S.
locations.
We are a precision-driven manufacturing organization where advanced machining, automation, and continuous improvement are core to how we operate.
Our teams work closely across engineering, operations, and production to deliver high-quality parts in a safety-focused, collaborative environment.
Why join us? Competitive Compensation: Hourly rate based on experience, with annual discretionary bonus eligibility Comprehensive Benefits: Medical, Dental, Vision, HSA/FSA, Life Insurance Retirement: 401(k) with company contribution Work-Life Balance: Monday–Thursday schedule with every other Friday off early High-Impact Role: Own programming strategy across advanced CNC equipment Modern Manufacturing: Automation, pallet changers, horizontal machining centers Stable, Growing Organization: Long-standing manufacturer with strong market demand Onsite Collaboration: Direct interaction with machinists, operators, and leadership Job Details Key Responsibilities and Duties: Program CNC turning and milling centers based on engineering drawings and specifications Create 3D models from drawings using Mastercam Develop efficient sequences of operations and optimal fixturing strategies Select and optimize tooling, cutters, and holders for quality and cycle time improvement Manage CNC program configuration control and revision accuracy Improve existing programs to enhance efficiency, quality, and throughput Communicate directly with machinists and operators on setup and program effectiveness Deploy CNC programs through the Visual ERP work order system Support cost estimating with setup and machining time estimates Generate work instructions and process sheets for operators Assist operators during setup and troubleshooting as needed Maintain accurate job records and documentation Follow all safety rules, PPE requirements, and housekeeping standards Collaborate cross-functionally to meet department and company goals Qualifications Needed: High School Diploma or equivalent Minimum 5 years of CNC programming experience Strong experience programming CNC lathes and milling machines Required: 4-Axis programming experience Preferred: 5-Axis programming experience Experience with machine automation and pallet changing systems Background with horizontal machining centers Proven fixture design and implementation experience Strong tooling knowledge and optimization skills Ability to program and support multiple machines simultaneously Ability to work independently with minimal supervision Strong communication, teamwork, and problem-solving skills U.S.
Person status required per export control regulations Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Not Specified
J
CNC Lead Lathe Machinist - 2nd Shift
🏢 Jobot
Salary not disclosed
Lead a precision aerospace team on 2nd shift — growth, stability, and hands-on leadership in East Hartford! This Jobot Job is hosted by: Jamie Beene Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.
Salary: $65,000
- $90,000 per year A bit about us: We are a family-owned manufacturer with over 75 years of excellence in producing precision aerospace components.
Our culture values teamwork, accountability, and continuous improvement, with a strong commitment to quality and customer satisfaction.
Why join us? Be part of a trusted aerospace manufacturer with long-standing industry partnerships Opportunity to lead and mentor a skilled 2nd shift production team Stability of a family-owned company with a reputation for excellence Growth potential in a culture that promotes from within Competitive compensation and benefits package Job Details Job Details Supervise, lead, and motivate the 2nd shift production team to meet goals in quality, safety, and delivery Assign workloads, monitor performance, and provide feedback and coaching to team members Ensure compliance with company policies, work instructions, and safety procedures Collaborate with quality and engineering to resolve production issues and maintain process improvements Maintain accurate records of production activity, labor, and attendance Requirements 3+ years of leadership or supervisory experience in a manufacturing environment (aerospace preferred) Strong knowledge of machining, production processes, and lean principles Excellent communication, problem-solving, and organizational skills Ability to work 2nd shift full-time on-site in East Hartford, CT Proficiency with Microsoft Office and ERP systems a plus Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Salary: $65,000
- $90,000 per year A bit about us: We are a family-owned manufacturer with over 75 years of excellence in producing precision aerospace components.
Our culture values teamwork, accountability, and continuous improvement, with a strong commitment to quality and customer satisfaction.
Why join us? Be part of a trusted aerospace manufacturer with long-standing industry partnerships Opportunity to lead and mentor a skilled 2nd shift production team Stability of a family-owned company with a reputation for excellence Growth potential in a culture that promotes from within Competitive compensation and benefits package Job Details Job Details Supervise, lead, and motivate the 2nd shift production team to meet goals in quality, safety, and delivery Assign workloads, monitor performance, and provide feedback and coaching to team members Ensure compliance with company policies, work instructions, and safety procedures Collaborate with quality and engineering to resolve production issues and maintain process improvements Maintain accurate records of production activity, labor, and attendance Requirements 3+ years of leadership or supervisory experience in a manufacturing environment (aerospace preferred) Strong knowledge of machining, production processes, and lean principles Excellent communication, problem-solving, and organizational skills Ability to work 2nd shift full-time on-site in East Hartford, CT Proficiency with Microsoft Office and ERP systems a plus Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Not Specified
J
Senior Cost Engineer
🏢 Jobot
Salary not disclosed
Cost Estimator | Aerospace & Defense Manufacturing | RFQs, Pricing & Margin Analysis This Jobot Job is hosted by: Jamie Beene Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.
Salary: $105,000
- $130,000 per year A bit about us: Founded nearly a century ago and based in South Windsor, Connecticut, we design and manufacture highly engineered products for demanding aerospace and defense applications, with a strong reputation for precision, reliability, and technical excellence.
We work cross-functionally across finance, engineering, sales, and production to deliver accurate pricing, protect margins, and support long-term growth in a regulated manufacturing environment.
Why join us? Competitive Compensation: Market-aligned base salary (DOE) Stable Aerospace & Defense Business: Long-term programs and repeat customers Cross-Functional Exposure: Work closely with finance, engineering, sales, and operations Impactful Role: Direct influence on pricing strategy, margins, and new business wins Structured Schedule: Monday–Thursday 7:30am–5:00pm; every other Friday 7:30am–4:00pm Onsite Collaboration: High visibility within a tight-knit manufacturing team Job Details Key Responsibilities and Duties Develop accurate cost estimates for RFQs, proposals, price lists, strategic opportunities, and business cases Create and execute estimating plans, identifying methodologies, required data, and associated risks Perform detailed cost analyses across material, labor, overhead, and indirect costs Build and maintain standardized product costing templates Analyze material costs including inventory availability, escalation, CPI/PPI, exchange rates, and freight Understand and model direct labor and overhead rates by department and location Support pricing strategies to maximize gross margin and profitability Review monthly cost variances and recommend pricing or standard cost updates Investigate job order variances and update item masters as needed Review blueprints and specifications to determine material and process requirements Support BOM setup and cost control within the MRP/ERP system Solicit and review subcontractor and vendor quotes, including government solicitations Collaborate cross-functionally to meet departmental and company goals Maintain compliance with safety requirements when accessing the shop floor Qualifications – Needed Bachelor’s degree preferred Minimum 5+ years of cost estimating or pricing experience Minimum 5+ years in a manufacturing environment, preferably a job shop Experience with government or defense-related contracts and solicitations Strong mechanical aptitude and understanding of manufacturing processes and tooling risks Ability to read and interpret blueprints and job specifications Proficiency in math, cost analysis, and financial modeling Experience with ERP systems (Visual, Epicor, SAP); strong Excel skills required Exceptional attention to detail and ability to manage multiple priorities Confident communicator with the ability to push back when jobs are not cost-effective U.S.
Person status required under export control regulations Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Salary: $105,000
- $130,000 per year A bit about us: Founded nearly a century ago and based in South Windsor, Connecticut, we design and manufacture highly engineered products for demanding aerospace and defense applications, with a strong reputation for precision, reliability, and technical excellence.
We work cross-functionally across finance, engineering, sales, and production to deliver accurate pricing, protect margins, and support long-term growth in a regulated manufacturing environment.
Why join us? Competitive Compensation: Market-aligned base salary (DOE) Stable Aerospace & Defense Business: Long-term programs and repeat customers Cross-Functional Exposure: Work closely with finance, engineering, sales, and operations Impactful Role: Direct influence on pricing strategy, margins, and new business wins Structured Schedule: Monday–Thursday 7:30am–5:00pm; every other Friday 7:30am–4:00pm Onsite Collaboration: High visibility within a tight-knit manufacturing team Job Details Key Responsibilities and Duties Develop accurate cost estimates for RFQs, proposals, price lists, strategic opportunities, and business cases Create and execute estimating plans, identifying methodologies, required data, and associated risks Perform detailed cost analyses across material, labor, overhead, and indirect costs Build and maintain standardized product costing templates Analyze material costs including inventory availability, escalation, CPI/PPI, exchange rates, and freight Understand and model direct labor and overhead rates by department and location Support pricing strategies to maximize gross margin and profitability Review monthly cost variances and recommend pricing or standard cost updates Investigate job order variances and update item masters as needed Review blueprints and specifications to determine material and process requirements Support BOM setup and cost control within the MRP/ERP system Solicit and review subcontractor and vendor quotes, including government solicitations Collaborate cross-functionally to meet departmental and company goals Maintain compliance with safety requirements when accessing the shop floor Qualifications – Needed Bachelor’s degree preferred Minimum 5+ years of cost estimating or pricing experience Minimum 5+ years in a manufacturing environment, preferably a job shop Experience with government or defense-related contracts and solicitations Strong mechanical aptitude and understanding of manufacturing processes and tooling risks Ability to read and interpret blueprints and job specifications Proficiency in math, cost analysis, and financial modeling Experience with ERP systems (Visual, Epicor, SAP); strong Excel skills required Exceptional attention to detail and ability to manage multiple priorities Confident communicator with the ability to push back when jobs are not cost-effective U.S.
Person status required under export control regulations Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Not Specified
J
Quality Manager
🏢 Jobot
Salary not disclosed
Quality Manager – Aerospace Manufacturing (AS9100) This Jobot Job is hosted by: Jamie Beene Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.
Salary: $100,000
- $140,000 per year A bit about us: Founded nearly 80 years ago and based in East Hartford, with other offices across Connecticut, we are a precision aerospace manufacturing partner supporting some of the most demanding OEMs and Tier 1 suppliers in the industry.
We specialize in complex, high-reliability components where quality systems, disciplined processes, and technical rigor are non-negotiable.
Our teams work closely with customers to ensure compliance, traceability, and continuous improvement across every stage of manufacturing.
Why join us? Competitive Compensation: Up to ~$145,000 base salary (DOE) 401(k) with Generous Match Comprehensive Benefits: Medical, Dental, Vision, Life Insurance Generous PTO & Paid Holidays Leadership Impact: Own and shape the quality function for complex aerospace programs Collaborative Work Environment: Partner closely with engineering, operations, and customers Stability + Growth: Long-standing aerospace manufacturer with modernized systems and continuous investment Job Details Key Responsibilities and Duties Lead and develop Quality Engineers supporting internal non-conformances, supplier issues, and customer escapes Manage daily inspection priorities across first-piece, in-process, final, receiving, FAI, and DQR over-inspection Schedule and coordinate third-party source inspections as required Interpret customer drawings, specifications, and contractual quality requirements Ensure compliance throughout contract review, manufacturing travelers, inspection plans, FAIs, PPAPs, and related documentation Develop, implement, and train quality policies, procedures, and standard work aligned with AS9100/ISO9001 Build and maintain standard workflows for CAPA, RCCA, NCMR/DMR, and RMA activity within ERP/eQMS systems (Epicor) Lead internal, customer, supplier, and third-party audits; maintain metrics, scorecards, and corrective action tracking Own onboarding, training, cross-training, and performance management for the quality team Act as the technical authority for quality decisions, approvals, and judgment calls Maintain compliance with export controls including ITAR and DFARS Qualifications — Needed B.S.
in Engineering or similar technical discipline Minimum 7–10 years of experience applying quality systems in an AS9100 aerospace manufacturing environment Prior supervisory or indirect team leadership experience strongly preferred Experience supporting Raytheon Technologies (Collins Aerospace / Pratt & Whitney), GE Aviation, or similar aerospace OEMs Strong background in PPAP, APQP, and First Article Inspection (FAI) Familiarity with critical component and flight safety processes (ESA, VSE, SPS) Deep knowledge of inspection methods, metrology, gage selection, calibration, MSA, and SPC Proven experience leading internal and external audits and management reviews Experience building or enhancing ERP and/or eQMS systems to manage CAPA, NCMR, RMA, audits, training records, and scorecards Epicor ERP experience is a plus Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Salary: $100,000
- $140,000 per year A bit about us: Founded nearly 80 years ago and based in East Hartford, with other offices across Connecticut, we are a precision aerospace manufacturing partner supporting some of the most demanding OEMs and Tier 1 suppliers in the industry.
We specialize in complex, high-reliability components where quality systems, disciplined processes, and technical rigor are non-negotiable.
Our teams work closely with customers to ensure compliance, traceability, and continuous improvement across every stage of manufacturing.
Why join us? Competitive Compensation: Up to ~$145,000 base salary (DOE) 401(k) with Generous Match Comprehensive Benefits: Medical, Dental, Vision, Life Insurance Generous PTO & Paid Holidays Leadership Impact: Own and shape the quality function for complex aerospace programs Collaborative Work Environment: Partner closely with engineering, operations, and customers Stability + Growth: Long-standing aerospace manufacturer with modernized systems and continuous investment Job Details Key Responsibilities and Duties Lead and develop Quality Engineers supporting internal non-conformances, supplier issues, and customer escapes Manage daily inspection priorities across first-piece, in-process, final, receiving, FAI, and DQR over-inspection Schedule and coordinate third-party source inspections as required Interpret customer drawings, specifications, and contractual quality requirements Ensure compliance throughout contract review, manufacturing travelers, inspection plans, FAIs, PPAPs, and related documentation Develop, implement, and train quality policies, procedures, and standard work aligned with AS9100/ISO9001 Build and maintain standard workflows for CAPA, RCCA, NCMR/DMR, and RMA activity within ERP/eQMS systems (Epicor) Lead internal, customer, supplier, and third-party audits; maintain metrics, scorecards, and corrective action tracking Own onboarding, training, cross-training, and performance management for the quality team Act as the technical authority for quality decisions, approvals, and judgment calls Maintain compliance with export controls including ITAR and DFARS Qualifications — Needed B.S.
in Engineering or similar technical discipline Minimum 7–10 years of experience applying quality systems in an AS9100 aerospace manufacturing environment Prior supervisory or indirect team leadership experience strongly preferred Experience supporting Raytheon Technologies (Collins Aerospace / Pratt & Whitney), GE Aviation, or similar aerospace OEMs Strong background in PPAP, APQP, and First Article Inspection (FAI) Familiarity with critical component and flight safety processes (ESA, VSE, SPS) Deep knowledge of inspection methods, metrology, gage selection, calibration, MSA, and SPC Proven experience leading internal and external audits and management reviews Experience building or enhancing ERP and/or eQMS systems to manage CAPA, NCMR, RMA, audits, training records, and scorecards Epicor ERP experience is a plus Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Not Specified
J
Senior CNC/CAM Programmer
🏢 Jobot
Salary not disclosed
Senior CNC/CAM Programmer – Multi-Axis Aerospace Machining This Jobot Job is hosted by: Jamie Beene Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.
Salary: $33
- $38 per hour A bit about us: Founded nearly 80 years ago and based in East Hartford, Connecticut, we are a precision aerospace manufacturer supporting some of the most demanding OEM customers in the world.
With deep roots in advanced machining, quality excellence, and continuous improvement, we partner closely with leading aerospace and defense organizations to deliver mission-critical components that meet the highest performance and certification standards.
Why join us? Competitive Compensation: DOE, aligned to senior-level CNC/CAM expertise 401(k) with Company Match Comprehensive Benefits: Medical, Dental, Vision Paid Company Holidays & PTO Tuition Reimbursement & Ongoing Training (including ESPRIT) Highly Technical Work: Precision & ultra-precision aerospace machining Direct Impact: Bridge engineering and manufacturing in a high-visibility role 100% Onsite: East Hartford, CT manufacturing facility Job Details Key Responsibilities & Duties Develop advanced CNC programs using ESPRIT CAM to optimize precision aerospace manufacturing Generate and optimize G-code for multi-axis lathes and vertical machining centers Collaborate with Engineering and Operations to define tooling, workholding, metrology, and deburring processes Document approved manufacturing methods within ESPRIT tooling and datasheet libraries Leverage parametric programming, macros, and CAM automation across part families Perform hands-on machine setup and support first-run production during process development Optimize toolpaths, material removal rates, surface finishes, and production yields Train production personnel to ensure repeatability and smooth production transitions Manage CNC programs and setup data within PDM and DNC systems Act as a technical SME supporting lean initiatives, cycle time reduction, and quality improvements Research emerging manufacturing technologies and recommend productivity investments Qualifications — Needed Bachelor’s degree in Engineering preferred (or equivalent progressive hands-on experience) Minimum 5+ years of advanced manufacturing experience in precision or ultra-precision environments Expert-level knowledge of Fanuc controls Proven CNC programming experience with CAM software ESPRIT CAM experience preferred (Mastercam, PartMaker, SolidCAM acceptable; training provided) Strong background in tooling systems, workholding, and CNC machine setup Experience with advanced techniques such as on-machine probing and tool setters Familiarity with manufacturing enterprise systems; Epicor ERP experience a plus Ability to bridge engineering intent and shop-floor execution Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Salary: $33
- $38 per hour A bit about us: Founded nearly 80 years ago and based in East Hartford, Connecticut, we are a precision aerospace manufacturer supporting some of the most demanding OEM customers in the world.
With deep roots in advanced machining, quality excellence, and continuous improvement, we partner closely with leading aerospace and defense organizations to deliver mission-critical components that meet the highest performance and certification standards.
Why join us? Competitive Compensation: DOE, aligned to senior-level CNC/CAM expertise 401(k) with Company Match Comprehensive Benefits: Medical, Dental, Vision Paid Company Holidays & PTO Tuition Reimbursement & Ongoing Training (including ESPRIT) Highly Technical Work: Precision & ultra-precision aerospace machining Direct Impact: Bridge engineering and manufacturing in a high-visibility role 100% Onsite: East Hartford, CT manufacturing facility Job Details Key Responsibilities & Duties Develop advanced CNC programs using ESPRIT CAM to optimize precision aerospace manufacturing Generate and optimize G-code for multi-axis lathes and vertical machining centers Collaborate with Engineering and Operations to define tooling, workholding, metrology, and deburring processes Document approved manufacturing methods within ESPRIT tooling and datasheet libraries Leverage parametric programming, macros, and CAM automation across part families Perform hands-on machine setup and support first-run production during process development Optimize toolpaths, material removal rates, surface finishes, and production yields Train production personnel to ensure repeatability and smooth production transitions Manage CNC programs and setup data within PDM and DNC systems Act as a technical SME supporting lean initiatives, cycle time reduction, and quality improvements Research emerging manufacturing technologies and recommend productivity investments Qualifications — Needed Bachelor’s degree in Engineering preferred (or equivalent progressive hands-on experience) Minimum 5+ years of advanced manufacturing experience in precision or ultra-precision environments Expert-level knowledge of Fanuc controls Proven CNC programming experience with CAM software ESPRIT CAM experience preferred (Mastercam, PartMaker, SolidCAM acceptable; training provided) Strong background in tooling systems, workholding, and CNC machine setup Experience with advanced techniques such as on-machine probing and tool setters Familiarity with manufacturing enterprise systems; Epicor ERP experience a plus Ability to bridge engineering intent and shop-floor execution Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Not Specified
J
Quality Inspector
🏢 Jobot
Salary not disclosed
Join a precision-driven aerospace team! Hands-on Quality Inspector role with top-tier benefits and growth in East Hartford, CT.
This Jobot Job is hosted by: Jamie Beene Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.
Salary: $30
- $37 per hour A bit about us: We are a trusted aerospace precision manufacturer proudly serving industry leaders like GE Aviation, Pratt & Whitney, and Collins Aerospace.
Our East Hartford, CT plant is home to cutting-edge technology, a strong team culture, and a commitment to quality that has defined our success for decades.
Why join us? 100% on-site role at our East Hartford, CT (06108) facility Competitive PTO, paid holidays, and 401(k) match Medical, dental, and vision benefits starting day one Tuition reimbursement and career development support Stable, growing company with long-standing aerospace partnerships Job Details Job Details Perform full inspections including first-piece, in-process, and final inspections Measure and record dimensions using micrometers, calipers, gages, and digital equipment Review process certifications and ensure conformance to blueprints and specs Collaborate with internal teams to troubleshoot and resolve technical issues Support customer quality requirements and ensure documentation accuracy Requirements A.S.
degree in engineering/technical discipline or equivalent experience 5+ years of aerospace inspection experience Hands-on experience with GE Aviation and Raytheon (Collins/Pratt) customers Knowledge of FAI, PPAP, ECAV, and supplier portal submissions Familiar with DFAR, ITAR, and Flight Safety critical processes (ESA, VSE, SPS) Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
This Jobot Job is hosted by: Jamie Beene Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.
Salary: $30
- $37 per hour A bit about us: We are a trusted aerospace precision manufacturer proudly serving industry leaders like GE Aviation, Pratt & Whitney, and Collins Aerospace.
Our East Hartford, CT plant is home to cutting-edge technology, a strong team culture, and a commitment to quality that has defined our success for decades.
Why join us? 100% on-site role at our East Hartford, CT (06108) facility Competitive PTO, paid holidays, and 401(k) match Medical, dental, and vision benefits starting day one Tuition reimbursement and career development support Stable, growing company with long-standing aerospace partnerships Job Details Job Details Perform full inspections including first-piece, in-process, and final inspections Measure and record dimensions using micrometers, calipers, gages, and digital equipment Review process certifications and ensure conformance to blueprints and specs Collaborate with internal teams to troubleshoot and resolve technical issues Support customer quality requirements and ensure documentation accuracy Requirements A.S.
degree in engineering/technical discipline or equivalent experience 5+ years of aerospace inspection experience Hands-on experience with GE Aviation and Raytheon (Collins/Pratt) customers Knowledge of FAI, PPAP, ECAV, and supplier portal submissions Familiar with DFAR, ITAR, and Flight Safety critical processes (ESA, VSE, SPS) Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Not Specified
J
HVAC S2 Mechanic
🏢 Jobot
Salary not disclosed
HVAC Services company seeking an S2 Mechanic onsite in South Windsor, CT This Jobot Job is hosted by: Alicia Blake Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.
Salary: $40
- $50 per hour A bit about us: World’s Leading provider of mechanical and electrical construction and facilities services, including planning, consulting, and operations and maintenance.
We offer a complete package of facilities services, including including HVAC, mechanical and electrical construction services, engineering, design, installation, repair and maintenance.
Openings in South Windsor, CT and Trumbull, CT! Why join us? We offer our employees a competitive salary and comprehensive benefits package and are always looking for individuals with the talent and skills required to contribute to our continued growth and success.
Equal Opportunity Employer/Veterans/Disabled Job Details Job Title: -- HVAC S2 Mechanic or OE2 or D2 Job Summary: --Currently seeking an experienced HVAC S2 Mechanic who will maintain, trouble shoot, repair and operate commercial HVAC systems for a R&D office building outside of Hartford.
M-F 7:30am-4:30pm.
This position comes with a vehicle.
Qualifications: -- CT S2 .
Commercial HVAC systems experience.
Valid driver's license.
Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Salary: $40
- $50 per hour A bit about us: World’s Leading provider of mechanical and electrical construction and facilities services, including planning, consulting, and operations and maintenance.
We offer a complete package of facilities services, including including HVAC, mechanical and electrical construction services, engineering, design, installation, repair and maintenance.
Openings in South Windsor, CT and Trumbull, CT! Why join us? We offer our employees a competitive salary and comprehensive benefits package and are always looking for individuals with the talent and skills required to contribute to our continued growth and success.
Equal Opportunity Employer/Veterans/Disabled Job Details Job Title: -- HVAC S2 Mechanic or OE2 or D2 Job Summary: --Currently seeking an experienced HVAC S2 Mechanic who will maintain, trouble shoot, repair and operate commercial HVAC systems for a R&D office building outside of Hartford.
M-F 7:30am-4:30pm.
This position comes with a vehicle.
Qualifications: -- CT S2 .
Commercial HVAC systems experience.
Valid driver's license.
Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Not Specified
jobs by
✓ All jobs loaded