Engineering Jobs in Tucson Remote
351 positions found — Page 16
*** Description: As part of the Project Management Chapter, the Global Project Manager (GPM) plays a key role in optimized product delivery and is accountable for all project management aspects of various projects from simple to complex in nature.
Drives the project/product from the original concept through completion by developing and directing detailed work plans, schedules, project estimates, spending, resource plans, and status reports.
As a trusted advisor, the Global Project Manager translates and drives projects into products and enables the organization to use energy and time effectively and efficiently while quickly responding to changing business needs across the portfolio.
The Opportunity: You will own project/program/product structures for Companion Diagnostics (CDx) product development & product care activities including communication management, timelines, resource and budget plans, progress and cost control, and risk management.
You will create, coordinate, and maintain integrated project plans including dependencies, resources and budgets, allowing the teams to work efficiently and effectively.
You are accountable for quality implementation in projects in the following areas: Project risk management; Critical path analysis; Scenario creation and analysis; Budget; Robust planning.
You will proactively own and drive integrated project plans including dependencies, resources and budgets allowing the teams to work efficiently and effectively.
You will execute project management processes including guiding and managing preparation for milestone reviews, capacity reviews (cQCR, SCR & fQCR), etc., as applicable & may lead improvement initiatives.
You will follow best practices in project/product teams and foster continuous improvement by sharing best practices and knowledge among peers.
You will select project methodology and apply agile methods as appropriate, including coaching and guiding teams in project methodology, including agile practices (with Project/Program Leads or PMC management if appropriate).
You have expertise in working in a hybrid Agile role, combining Agile methods (usually within the project/product team) with non-Agile techniques (usually needed with partners and some functions).
You will establish, measure, and report the Key Performance Indicators (KPIs), standard metrics, Objectives and Key Results (OKRs) or Outcome Based Planning (OBPs) key results for projects enabling teams and functions to measure and improve quality, efficiency and effectiveness.
You will act as a trusted advisor with a 360 view on all levels to advise and support the project/product teams as well as the broader organization in the holistic planning; project risk management; scenario creation as well as critical path analysis with the aim to ensure an optimized value delivery.
You will serve as a single point of contact & control for project and program data collected from the functions.
You will lead project team meetings and foster knowledge sharing between project/product teams and sub-chapters to enhance project effectiveness and optimized delivery.
You will identify project risks and describe potential implications for budget, timeline and scope.
You will identify gaps, potential bottlenecks or delays, challenge assumptions and propose options to close gaps and get projects back on track while communicating issues proactively to stakeholders.
You will manage project/product team information to support the teams themselves, the Life Cycle Teams (LCTs) and/or other governing body decision making.
Frequently provides high level/pre-defined and recent planning data for scenario analysis and decision making on a portfolio level.
You will serve as an Agile Program Manager as defined by Scaled Agile Framework (SAFe) where applicable.
Other duties as assigned by leadership.
Who You Are: You hold a Bachelor's degree, preferably in a Life Sciences field.
You have 4 years of experience in project management / engineering/ business in the diagnostic, medical device, pharmaceutical or biotech industry leading product development and product care projects.
You have at least one year of experience in the following areas: clinical biomarker or In Vitro Diagnostic development, companion diagnostic development, analytical and clinical validations, regulatory submissions, instrument/systems development, or program management) You have one year of experience in a regulated industry (e.g.
FDA 21 CFR part 820, ISO 13485, ISO 9001).
Preferred Qualifications: You hold a Master's degree, preferably in a Life Sciences field, and 6 years project management / engineering/ business experience in the diagnostic, medical device, pharmaceutical or biotech industry leading product development and product care projects.
Alternatively, you hold a Ph.D with 3 years project management experience in those areas.
Prior 3 years in clinical biomarker or In Vitro Diagnostic development experience in companion diagnostic development, analytical and clinical validations and regulatory submissions or instrument development and program management.
Relocation assistance is not available for this job posting.
This is a hybrid position with an expectation of on-site presence in the Oro Valley, AZ campus ~2 days/week.
Nesco Resource offers a comprehensive benefits package for our associates, which includes a MEC (Minimum Essential Coverage) plan that encompasses Medical, Vision, Dental, 401K, and EAP (Employee Assistance Program) services.
Nesco Resource provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.
Universal Avionics has been a pioneer in avionics technology for over 40 years. We are a leading manufacturer of innovative solutions that enhance aviation safety, reliability, and operational efficiency. Our portfolio includes Head-Down Displays (HDD), Head-Up Displays (HUD), Head Wearable Displays (HWD), and Combined Vision Systems (CVS), featuring Enhanced Vision System (EVS) and Synthetic Vision System (SVS) technologies. We deliver both retrofit and forward-fit solutions across a wide range of aircraft types, serving commercial airlines, cargo operators, business aviation, and special missions worldwide.
Summary
Plan, coordinate, and direct the Universal Avionics Repair Station Quality for Service and Reliability activities designed to ensure Quality and Service of products consistent with established standards. This role will also be responsible for and has authority over all Repair station operations that are conducted under Part 145, including ensuring that Repair station personnel follow the regulations and serving as the primary contact with the FAA.
Essential Duties and Responsibilities include the following. Other duties may be assigned:
1. Regulatory Compliance & Avionics Quality Oversight:
- FAA Accountable Manager for the Universal Avionics Repair Station.
- Maintain compliance with the FAA Drug & Alcohol Program by completing all required program activities.
- Oversee and sustain certification approvals issued by global aviation agencies, including the European Aviation Safety Agency (EASA) and the United Kingdom Civil Aviation Authority (UK‑CAA).
- Maintain certification approvals from Coordinating Agency for Supplier Evaluation (CASE) and aviation operational customers.
- Manage the ongoing update and compliance activities for Repair Station Quality Control Manual (RSQCM) and Safety Management Systems manuals.
- Prepare and deliver comprehensive evaluation reports (findings, statistical analysis, root‑cause analysis, and Service Bulletin reviews) to the Certification team for FAA‑reportable events.
- Manage updates, validation, and maintenance of the UA product line Capability List.
2. Quality Management:
- Develop and uphold departmental objectives that align with corporate policies and regulatory requirements.
- Develop, update, and maintain procedural documents within the BMS, including Standard Operating Procedures (SOPs), Work Instructions (WIs), and Forms.
- Manage Repair Station inspectors engaged in quality assurance activities.
- Actively contributes to quality management teams and provides clear, well‑structured technical and program updates to leadership.
- Keeps management informed of significant quality issues, trends, and developments, along with the corrective actions underway to address them.
3. Training:
Design and implement quality assurance training programs approved by the FAA.
4. Internal, Regulatory and External audits:
- Serve as the company representative during FAA, EASA, UK‑CAA, and customer audits and provides support for AS9100 external audit activities.
- Manage internal processes to prepare for and support internal and external audits.
- Responsible for supporting, managing, or implementing internal and external corrective actions.
- Maintains approval certifications from AS9100 international Quality Management System (QMS) standard for the aviation, space, and defense (AS&D) industry.
5. Engineering, Customer & OEM Coordination:
- Supports sustaining engineering efforts by partnering with Engineering to incorporate in‑service feedback into product design.
- Investigate and resolve customer quality issues and respond to customer inquiries related to quality and reliability.
- Serve as Repair Station Quality focal for OEM customers and Program Management.
- Partner with Customer Service to manage warranty issues, complaints, and reliability trends.
- Present MTBF metrics, reliability performance, and audit results to leadership and key customers.
- Apply statistical process control (SPC) methods for analyzing data to evaluate the current process and process changes.
6. Other:
- Serve on the Safety Committee to support the resolution of safety incidents and ensure compliance with regulatory requirements within the Safety Management System (SMS).
- Ensure precision measurement tools meet Calibration standards, maintain regulatory compliance, manage calibration records, and oversee tool accuracy to support airworthiness.
- Oversee the scrap program for top‑level units, parts, and materials, ensuring compliance with environmental regulations, safety standards, and efficient logistics processes.
- Determine product acceptance and vendor continuation based on evaluation of their quality management systems and performance.
- Qualify new subcontractors for the Repair Station in partnership with the Supplier Quality team to ensure compliance with regulatory and quality requirements.
- Maintain current knowledge of applicable government and industry quality assurance codes, standards, and best practices.
Competency- To perform the job successfully, an individual should demonstrate the following competencies.
Minimum Qualifications:
An individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required to perform this job successfully. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Education and/or Experience:
Bachelor's degree (B. A.) in a related field from four-year college or university; or five to seven years related experience and/or training; or equivalent combination of education and experience. Working knowledge and understanding regulatory requirements and experience managing an FAA Part 145 Repair Station from the Quality perspective required.
Computer Skills:
Microsoft Office suite- Word, Excel, PowerPoint. Familiarity with using ERP software.
Language Skills:
English
Mathematical Skills:
Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
Reasoning Ability:
Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.
Work Environment:
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually moderate.
Physical Demands:
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include Close vision, Distance vision, Peripheral vision, Depth perception and Ability to adjust focus. While performing the duties of this Job, the employee is regularly required to use hands to finger, handle, or feel; reach with hands and arms and talk or hear. The employee is frequently required to stand; walk and sit. The employee is occasionally required to climb or balance and stoop, kneel, crouch, or crawl.
What We Offer:
- Benefits eligibility starts on your first day as a full-time employee at Universal Avionics.
- Medical insurance (multiple plan options, including low-deductible PPO)
- Preventive care covered at 100%
- Affordable copays for doctor visits, urgent care, and prescriptions
- Teladoc virtual care access
- Vision coverage through VSP (includes exams, frames, and lenses)
- Dental insurance (covers preventive, basic, and major services)
- 401(k) with immediate safe harbor match (100% match on up to 4% of pay after 60 days)
- 9/80 work schedule option – every other Friday off
- Vacation, sick time, and 14 paid holidays (including a week in December)
- Tuition reimbursement
- Gym reimbursement
- One Pass Select (discounted access to gyms, fitness apps, and more)
- Travel assistance and employee discounts
- Employee Assistance Program (EAP) and emotional wellness support: Up to 3 free counseling visits per issue/year through Reliance Matrix
- Up to 6 free counseling sessions per issue/year through Health Advocate
- Includes mental health, financial, legal, work-life, medical navigation, and life coaching support
- And more!
Why You’ll Love Working Here:
- Universal Avionics offers the best of both worlds: the close-knit, agile culture of a mid-sized company, with the resources and global impact of our parent company, Elbit Systems.
- Our team is driven by purpose, innovation, and a shared passion for aviation safety.
- Here's what makes our work environment thrive:
- A collaborative, supportive team of skilled professionals and mentors
- Groundbreaking projects that shape the future of avionics technology
- A company culture that promotes innovation, career growth, and continuous learning
- Meaningful work that impacts air travel safety around the world
- A strong work-life balance, including a 9/80 schedule option
To learn more about Universal Avionics, visit: Universal Avionics’ products and technology are subject to U.S. export laws and regulations, including but not limited to the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR). As part of our compliance process, we inquire about work authorization and citizenship status to ensure alignment with these regulations.
Date Posted:
2026-02-03Country:
United States of AmericaLocation:
US-AZ-TUCSON-848 ~ 1151 E Hermans Rd ~ BLDG 848Position Role Type:
OnsiteU.S. Citizen, U.S. Person, or Immigration Status Requirements:
Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearanceSecurity Clearance Type:
DoD Clearance: SecretSecurity Clearance Status:
Ability to obtain INTERIM U.S. government issued security clearance is required prior to start dateAt Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.
The Test Equipment Engineering (TEE) Directorate is a multi-discipline organization responsible for developing test solutions for all Raytheon Missile Defense products. We are hands-on, designing with the latest technology and tools, and integrate state of the art test solutions with the most advanced engineering systems in the world. TEE products are located in engineering labs, in the field, and in production environments utilized for weapon system product verification, qualification, test data analysis, and production test solution development. TEE has job opportunities across all phases of the engineering lifecycle, including demonstrations, early engineering tests, design verification tests, production, and sustainment.
TEE is looking for Mechanical Engineers to be responsible for designing, developing, documenting, and maintaining complex test environment systems for all Raytheon effector products.
What You Will Do
Research, plan, design and develop mechanical test systems in areas including, but not limited to, vibration, thermal, hydraulic, radio frequency, and electro-optical for production testing environments
Integrate and validate test systems against stringent accuracy and reliability requirements
Evaluate production installations and recommend design modifications to eliminate malfunctions
Qualifications You Must Have
Bachelor’s degree in Science, Technology, Engineering, or Mathematics (STEM) and a minimum two (2) years of work experience, or an Advanced Degree in a related field
Two (2) years of technical / engineering experience in mechanical design and/or production support
Two (2) years’ experience with CAD solid modeling tools and analysis tools with an emphasis on ProE / CREO Parametric
Experience with geometric dimensioning and tolerance analysis
Experience creating mechanical drawing packages
The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance
Qualifications We Prefer
Design experience with mechanical and electronic packaging
Experience with creating complex design drawing packages
Experience with Configuration Management processes, application, and tools (e.g., Windchill / cPDM)
Experience in Model Based Engineering or Model Based Design
Experience in mechanical sub-systems packaging, materials, thermal analysis, structural analysis, control systems, electrical hardware design, or large assembly development
Experience with environmental stress screening of hardware (e.g., vibration, shock, thermal, etc.)
Systems engineering experience
What We Offer
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.
This position offers relocation
Learn More & Apply Now
This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: has a friendly, caring and laid-back atmosphere, combined with the innovation and energy of a metropolitan region and recognized as one of America’s 10 Best Small Cities. Surrounded by beautiful mountains, colorful Sonoran Desert landscape and majestic saguaro cacti, Tucson is blessed with some of nature’s best work. Tucson is known for its bright blue skies, and with more than 310 sunny days per year, Tucson’s fantastic weather lets residents enjoy the outdoors year-round
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
The salary range for this role is 68,900 USD - 131,100 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Manual Machine Operator – Tucson, AZ
- Location: Tucson, AZ
- Compensation: $20–$28/hour
- Employment Type: Full-Time (Regular Business Hours)
- Department: Machine Shop
- Reports To: Plant Manager, Production Department
Who We Are
At Industrial Tool, Die and Engineering, precision is our passion. With decades of experience behind us, we’ve built a reputation for delivering top-tier components to industries where details matter—like aerospace and advanced manufacturing. We combine old-school craftsmanship with modern innovation, and we’re proud of the team that makes it all happen.
If you’re someone who takes pride in doing things right the first time, enjoys hands-on work, and thrives in a team that values quality and skill, then you’ll fit right in here.
The Opportunity
We’re looking for a talented Manual Machine Operator to join our production floor. You’ll work with manual lathes, mills, grinders, and ProtoTrak systems to bring precision parts to life. From set-up to final inspection, you’ll play a key role in delivering the quality our clients expect.
What You’ll Do
- Operate manual machines to produce precision components
- Set up jobs and verify dimensions using high-precision tools
- Read and interpret technical blueprints and work instructions
- Select and maintain proper tooling for each job
- Complete documentation accurately (job logs, SPC forms, etc.)
- Collaborate with the team to hit production targets and maintain quality
What You Bring
- High school diploma required; trade school or apprenticeship preferred
- 5+ years of experience in a machine shop environment
- Strong blueprint reading and mechanical problem-solving skills
- Knowledge of machining speeds, feeds, and MIL-SPEC standards
- Ability to lift up to 50 lbs and work in a typical machine shop setting
- Proficiency in machine shop math and basic trigonometry
- Clear communication skills and a team-oriented mindset
Why Join Us
- Competitive pay and full-time stability
- Work with a team that values skill, quality, and collaboration
- Be part of a company with a legacy—and a future
- Opportunities to grow your craft and contribute to something meaningful
Ready to Apply?
If this sounds like the kind of shop you’d be proud to work in, we’d love to hear from you. Send us your resume and tell us a bit about your experience. Let’s build something great—together.
Date Posted:
2026-02-17Country:
United States of AmericaLocation:
US-AZ-TUCSON-805 ~ 1151 E Hermans Rd ~ BLDG 805Position Role Type:
OnsiteU.S. Citizen, U.S. Person, or Immigration Status Requirements:
Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearanceSecurity Clearance Type:
DoD Clearance: SecretSecurity Clearance Status:
Ability to obtain INTERIM U.S. government issued security clearance is required prior to start date
At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.
The Hardware in the Loop (HWIL) Department in Tucson, AZ is a multi-discipline organization responsible for designing, building and integrating state of the art testing environments (flight simulators for missiles), as the last step before flight test. On our team, you will work with weapon system designers to understand requirements, design solutions, integrate, and deploy the systems to help support tactical software development, testing, and delivery for missiles to the warfighter.
This position is within the Effectors Center of the HWIL organization, and is an onsite role located in Tucson, AZ
What You Will Do
Collaborate in a multi-disciplinary team to develop software to control Hardware-In-the-Loop (HWIL) facilities (flight simulators for missiles).
Software design, coding and integration in a real-time environment.
Travel up to 20% to support development and/or delivery of our test environment equipment.
Qualifications You Must Have
Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum 2 years of prior relevant experience.
Experience with software development in C++, using the object-oriented features.
Active and transferrable final Secret U.S. government issued security clearance is required prior to start date with the ability to obtain program access after start.
Qualifications We Prefer
Experience contributing to the design, development and/or integration of the test equipment and/or hardware (software that controls complicated hardware systems)
Strong organization, coordination, planning, teaming skills, as well as written and oral communication skills.
Experience with Software Agile Process.
Experience developing software using a Linux operating systems.
Some comprehension of Earned Value Management System (EVMS) terminology analysis purposes.
What We Offer
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.
Relocation Offered Based On Eligibility
Learn More & Apply Now!
Please consider the following role type definition as you apply for this role:
Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.
Clearance Information: This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:
Location Information: This position is onsite at our campus in beautiful Tucson, AZ. Tucson has a friendly, caring, and laid-back atmosphere, combined with the innovation and energy of a metropolitan region, and recognized as one of America’s 10 Best Small Cities. Surrounded by beautiful mountains, colorful Sonoran Desert landscape and majestic saguaro cacti, Tucson is blessed with some of nature’s best work. Tucson is known for its bright blue skies, and with more than 310 sunny days per year, Tucson’s fantastic weather lets residents enjoy the outdoors year-round.
Virtual Fly Over City of Tucson & Community, YouTube Video Links
“Raytheon In Tucson”: ,-az-location
“Tucson is Awesome”: “Winter in Tucson”: part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
The salary range for this role is 68,900 USD - 131,100 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Jabil is seeking a Senior Manager, Manufacturing Test Development for our Austin, TX location who will directly contribute to the transformative growth within our Intelligent Infrastructure division by applying unique and innovative approaches to developing end customer product solutions.
You will be responsible for managing the technical direction of Rack scale test software and integration development programs through the lens of the customer, factory, and services. You will also be responsible for partnering and collaborating with Hyperscale & AI customers, strategic suppliers, internal engineering, product management, program management, manufacturing, test and quality teams to ensure your products meet the rigorous standards and performance expectations of Jabil’s world-class manufacturing environments and our customers.
What can you expect to do?
LEADERSHIP RESPONSIBILITIES
- Responsible for ensuring the delivery of all manufacturing test solutions for new and sustaining programs for rack-scale AI/ML and GPGPU and hardware accelerator-based server and storage platforms.
- Accountable for all onsite customer delivery commissioning tests as an extension of the manufacturing test capability.
- Strong ability to organize teams and drive the solution for multiple, complex problems cross-functionally and within various areas of technical expertise (hardware, software, firmware, performance, interoperability, etc.)
- Charged with ensuring the right level of execution discipline and engineering rigor is applied to all technical program deliverables – must lead by example.
- Empowered to make key decisions with respect to quality and features that may impact customer experience.
- Capable of influencing individuals, teams and executives to the level necessary to support delivery of programs within schedule, scope and budget boundaries.
- Able to understand how technical decisions impact the broader business, factories and customers and use these insights to lead the broader organization to optimized outcomes.
- Must be extremely detailed oriented while at the same time able to communicate complex issues in simple, actionable terms at all levels within the organization.
- Must possess a strong balance of technical skills, experience-based judgment and business acumen in all execution and decision-making activities.
- Strong ability to develop, grow and maintain healthy interpersonal relationships with peers, team members, executive leadership, customers and external partners at all times.
- Provide thought leadership and direct engineering support to multiple manufacturing sites in the areas of product, component and supplier expertise.
- Exchange knowledge and information with other Jabil facilities to ensure best practices are both shared and implemented throughout the Jabil organization.
- Guide technical and operational teams towards the successful resolution of complex and/or systemic product, process and material issues through the application of rigorous analytical methods.
- Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines).
FUNCTIONAL RESPONSIBILITIES
- Primary technical interface for manufacturing rack test development efforts from concept through delivery.
- Own driving resolution of all issues regarding test solutions aligned with critical path.
- Reviewer and approver of technical risks, and contingency/mitigation plans.
- Can review and provide input to material plans, test plans, test reports, lessons learned.
- Owns preventative actions so gaps in E2E process or capability are addressed long-term.
- Accountable for managing manufacturing technical and quality excursions through indirect coordination and hands-on engineering analysis as it pertains to your test deliverables.
- Provide technical and product subject matter expertise to the factories and customers.
- Lead highly technical and innovative RFI/RFQ responses supporting new strategic and recurring business opportunities.
KNOWLEDGE REQUIREMENTS
- Strong technical program management skills. Able to lead and direct a broad cross-functional global team.
- Exceptional knowledge and experience regarding product development processes and tools.
- Experience and deep level of understanding of server, storage, networking and GPGPU and PCIe-based accelerator architectures.
- Working knowledge of OS, driver, firmware and hardware architecture, device interactions and ability to leverage expertise to determine root cause that lead to optimized solutions.
- Deep experience in process development and process improvement. Able to lead the development of complex processes spanning multiple functions and areas of expertise.
What is the experience needed to be successful in this role?
- BS degree in Electrical/Computer Engineering, Computer Science or related field is required; MS is preferred.
- 8+ years' experience in a software or hardware product development environment with enterprise server, storage or networking products is required.
- Excellent verbal and written communication skills.
- Prior experience directly or indirectly managing engineering and/or development teams.
- Experience managing remote, multi-national and geographically dispersed development teams.
- Domestic and/or international travel, up to 30%, may be required.
Benefits Package with Jabil
Along with growth, stability, and the opportunity to be challenged, Jabil offers a competitive benefits package that includes:
- Competitive Base Salary
- Annual Bonus
- Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options
- 401K Match
- Employee Stock Purchase Plan
- Paid Time Off
- Tuition Reimbursement
- Life, AD&D, and Disability Insurance
- Commuter Benefits
- Employee Assistance Program
- Pet Insurance
- Adoption Assistance
- Annual Merit Increases
- Community Volunteer Opportunities
Remote working/work at home options are available for this role.
Job Family: Electrical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
Jabil has an exciting opportunity for a highly experienced and technically proficient Principal Electrical Engineer to engage in the design, fabrication, and integration of electrical systems for data center power and cooling products, as well as factory enablement projects. This role includes full-stack electrical design from generator systems to AI rack integration zones, with a focus on PDUs, UPS systems, MV/HV power distribution, phased power infrastructure, and controls architecture. The ideal candidate will bring deep technical expertise and a passion for delivering scalable, reliable, and compliant infrastructure solutions.
The Sr. Principal Electrical Integration Engineer will manage and oversee the electrical systems essential for the data center, energy storage systems, and HVAC applications. This role will involve developing specifications, selecting key components, routing wires and cables, establishing connections, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.
What will you do?
Product & System Design:
- Knowledge of high-efficiency power conversion and point-of-load regulation for AI/ML server racks (BBU, rPDU).
- Understanding of rack power zoning, load balancing, and redundancy strategies for tiered compute workloads.
- Ensure electrical systems are properly integrated into fabricated enclosures and structural assemblies.
- Lead the electrical design and integration of UPS systems, power conversion units, and safety interlocks.
- Develop and maintain single-line and three-line diagrams for power distribution systems, ensuring clarity, accuracy, and compliance with NEC, IEEE, and UL standards.
- Design and validate three-phase power systems, including load balancing, fault protection, and redundancy strategies for high-availability environments.
- Engineer and integrate medium-voltage (MV) and high-voltage (HV) power distribution components such as switchgear, transformers, busways, and protective relays.
- Specify and qualify electrical components including circuit breakers, contactors, CTs/PTs, surge protection devices, isolation switches for MV/HV applications and the design and development of wiring harnesses
Factory & Facility Integration:
- Design end-to-end electrical distribution systems from generator and utility interface to AI rack integration zones.
- Coordinate with cross functional teams to ensure electrical infrastructure aligns with facility layout, safety codes, and operational requirements.
- Plan and implement power redundancy, load segmentation, and scalable distribution architectures to support high-density compute environments.
- Ensure proper grounding, EMI shielding, and thermal management across all facility-level electrical systems.
Fabrication & Implementation:
- Define fabrication processes including panel building, cable routing, and system integration, ensuring manufacturability and serviceability.
- Perform electrical load calculations, short-circuit analysis, arc flash studies, and thermal modeling using tools such as ETAP, SKM PowerTools, or EasyPower.
- Lead design reviews, risk assessments, and validation testing to ensure compliance with UL, IEC, NEC, CE, RoHS, and REACH standards.
- Interface with suppliers and customers resolve fabrication and quality issues, and ensure adherence to specifications.
- Support prototype builds, field deployments, and customer engagements to gather feedback and refine designs.
Controls Architecture:
- Develop and implement electrical controls architecture for power and cooling systems, including PLCs, SCADA integration, and remote monitoring capabilities.
- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
- Collaborate with software and automation teams to ensure seamless integration of control systems with facility and product-level infrastructure.
- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.
Leadership & Documentation:
- Develop and maintain engineering documentation including BOMs, test procedures, and engineering change orders (ECOs).
- Mentor junior engineers and provide technical leadership across cross-functional teams.
- Drive continuous improvement initiatives focused on cost reduction, design for manufacturability (DFM), and product scalability
How will you get here?
Education:
- Bachelor’s Degree in Electrical Engineering or related engineering discipline.
Experience:
- 10+ years of experience in electrical design and fabrication, with a focus on data center or industrial power systems
- Proficiency in ECAD tools (AutoCAD Electrical, EPLAN, SolidWorks Electrical) and integration with mechanical CAD platforms
- Strong understanding of MV/HV power distribution, lithium-ion UPS systems, and three-phase electrical infrastructure
- Experience with electrical analysis tools (ETAP, SKM PowerTools, EasyPower)
- Proven experience in facility-level electrical design and construction support and Excellent leadership, communication, and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight as part of a global team
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices while mentoring less experienced engineers
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Excellent problem-solving skills and attention to detail
Preferred Qualifications:
- Master’s Degree in Electrical Engineering
- Active Professional Engineer (PE) license
- Experience with data center infrastructure: UPS systems, switchgear, CRAC units, and PDUs
- Familiarity with global compliance standards: UL, CE, RoHS, REACH, and IEEE.
- Hands-on experience with panel fabrication, wiring, and system integration
- Knowledge of thermal and mechanical constraints in electrical enclosure design and experience working with global suppliers and contract manufacturers
- Experience in WindChill and DevOps
Remote working/work at home options are available for this role.
Jabil is seeking a Senior Manager, Manufacturing Test Development for our Austin, TX location who will directly contribute to the transformative growth within our Intelligent Infrastructure division by applying unique and innovative approaches to developing end customer product solutions.
You will be responsible for managing the technical direction of Rack scale test software and integration development programs through the lens of the customer, factory, and services. You will also be responsible for partnering and collaborating with Hyperscale & AI customers, strategic suppliers, internal engineering, product management, program management, manufacturing, test and quality teams to ensure your products meet the rigorous standards and performance expectations of Jabil’s world-class manufacturing environments and our customers.
What can you expect to do?
LEADERSHIP RESPONSIBILITIES
- Responsible for ensuring the delivery of all manufacturing test solutions for new and sustaining programs for rack-scale AI/ML and GPGPU and hardware accelerator-based server and storage platforms.
- Accountable for all onsite customer delivery commissioning tests as an extension of the manufacturing test capability.
- Strong ability to organize teams and drive the solution for multiple, complex problems cross-functionally and within various areas of technical expertise (hardware, software, firmware, performance, interoperability, etc.)
- Charged with ensuring the right level of execution discipline and engineering rigor is applied to all technical program deliverables – must lead by example.
- Empowered to make key decisions with respect to quality and features that may impact customer experience.
- Capable of influencing individuals, teams and executives to the level necessary to support delivery of programs within schedule, scope and budget boundaries.
- Able to understand how technical decisions impact the broader business, factories and customers and use these insights to lead the broader organization to optimized outcomes.
- Must be extremely detailed oriented while at the same time able to communicate complex issues in simple, actionable terms at all levels within the organization.
- Must possess a strong balance of technical skills, experience-based judgment and business acumen in all execution and decision-making activities.
- Strong ability to develop, grow and maintain healthy interpersonal relationships with peers, team members, executive leadership, customers and external partners at all times.
- Provide thought leadership and direct engineering support to multiple manufacturing sites in the areas of product, component and supplier expertise.
- Exchange knowledge and information with other Jabil facilities to ensure best practices are both shared and implemented throughout the Jabil organization.
- Guide technical and operational teams towards the successful resolution of complex and/or systemic product, process and material issues through the application of rigorous analytical methods.
- Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines).
FUNCTIONAL RESPONSIBILITIES
- Primary technical interface for manufacturing rack test development efforts from concept through delivery.
- Own driving resolution of all issues regarding test solutions aligned with critical path.
- Reviewer and approver of technical risks, and contingency/mitigation plans.
- Can review and provide input to material plans, test plans, test reports, lessons learned.
- Owns preventative actions so gaps in E2E process or capability are addressed long-term.
- Accountable for managing manufacturing technical and quality excursions through indirect coordination and hands-on engineering analysis as it pertains to your test deliverables.
- Provide technical and product subject matter expertise to the factories and customers.
- Lead highly technical and innovative RFI/RFQ responses supporting new strategic and recurring business opportunities.
KNOWLEDGE REQUIREMENTS
- Strong technical program management skills. Able to lead and direct a broad cross-functional global team.
- Exceptional knowledge and experience regarding product development processes and tools.
- Experience and deep level of understanding of server, storage, networking and GPGPU and PCIe-based accelerator architectures.
- Working knowledge of OS, driver, firmware and hardware architecture, device interactions and ability to leverage expertise to determine root cause that lead to optimized solutions.
- Deep experience in process development and process improvement. Able to lead the development of complex processes spanning multiple functions and areas of expertise.
What is the experience needed to be successful in this role?
- BS degree in Electrical/Computer Engineering, Computer Science or related field is required; MS is preferred.
- 8+ years' experience in a software or hardware product development environment with enterprise server, storage or networking products is required.
- Excellent verbal and written communication skills.
- Prior experience directly or indirectly managing engineering and/or development teams.
- Experience managing remote, multi-national and geographically dispersed development teams.
- Domestic and/or international travel, up to 30%, may be required.
Benefits Package with Jabil
Along with growth, stability, and the opportunity to be challenged, Jabil offers a competitive benefits package that includes:
- Competitive Base Salary
- Annual Bonus
- Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options
- 401K Match
- Employee Stock Purchase Plan
- Paid Time Off
- Tuition Reimbursement
- Life, AD&D, and Disability Insurance
- Commuter Benefits
- Employee Assistance Program
- Pet Insurance
- Adoption Assistance
- Annual Merit Increases
- Community Volunteer Opportunities
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
