Engineering Jobs in Swedesboro

Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio.  IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers.

Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business.

The Level B Fleet Mechanic/Technician is a journeyman-level role responsible for independent diagnosis and repair of most mechanical, electrical, and hydraulic issues on refuse trucks, heavy trucks/tractors, trailers, and heavy equipment. This role also mentors Level C technicians, supports road calls, and ensures high uptime and DOT compliance for the fleet.

• Diagnostics & Repair

  • Independently diagnose and repair:
    • Diesel and gasoline engines (intake, fuel, cooling, aftertreatment/emissions components).
    • Drivetrain components including clutches, transmissions, differentials, PTOs, and drive lines.
    • Air and hydraulic brake systems, ABS, and suspension components.
    • Hydraulic systems on refuse equipment (packer bodies, arms, cylinders, pumps, valves, and hose routing).
    • Electrical systems including starting/charging, multiplex wiring, sensors, and lighting.

   

  Preventive Maintenance & Compliance

  • Perform and sign off on DOT-compliant inspections and PMs, ensuring all safety-critical items are addressed and documented.
  • Accurately interpret and close out DVIR/eDVIR defects; communicate recurring defects to leadership for root-cause analysis.
  • Use OEM and aftermarket diagnostic software, service bulletins, and wiring schematics to troubleshoot complex issues.

   

  Road Calls & Operational Support

  • Respond to road calls and breakdowns throughout the NYC tri-state area; perform safe temporary or permanent repairs to return vehicles to service or coordinate towing as needed.
  • Communicate clearly with dispatch, supervisors, and drivers on repair status and estimated completion times.

   

  Mentorship, Training & Documentation

  • Guide and mentor Level C technicians on best practices, safety, troubleshooting, and proper repair methods.
  • Complete work orders thoroughly, capturing complaint, cause, correction, labor hours, and parts used.
  • Support continuous improvement initiatives for PM compliance, repeat repair reduction, and parts standardization.

• High school diploma or GED required.
• 3–5+ years hands-on experience as a diesel, truck, or heavy equipment mechanic/technician, including diagnostics and major component replacement.
• Valid CDL Class B (or higher) with air brake endorsement strongly preferred to perform road tests and move equipment on public roads within NY/NJ/CT.
• Demonstrated proficiency with hydraulic, pneumatic, and electrical systems.
• Ability to read and interpret OEM service manuals, wiring diagrams, and hydraulic schematics.
• Experience in refuse/solid waste, municipal, or LTL/heavy trucking fleet operating in urban environments preferred.
• ASE certifications in Medium/Heavy Truck (T series) or Truck Equipment (E series); working toward Master status preferred.
• Basic welding and cutting skills (MIG, stick, torch) for brackets, hangers, and minor body fabrication preferred.
• Familiarity with computerized fleet maintenance and parts inventory systems preferred.

This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. 

Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.  

This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. 

JOB DESCRIPTION

Insight Global is assisting a signal processing and optical telecommunications client of ours in identifying an Embedded Software Development Engineer for a direct-hire opening. The Embedded Software Development Engineer designs, implements, and tests embedded software features running on both in-house developed and commercial hardware platforms.

• Design, develop, test, and maintain embedded software for optical telecommunications equipment.
• Develop software in C/C++ for embedded Linux SoC systems and microprocessors.
• Collaborate closely with hardware design engineers to support rapid embedded software development: Provide software input during schematic design reviews and assist with board bring-up, debugging, and validation.
• Support the production team with software testing and production workflows
• Provide customer technical support, including bug fixes and implementation of new software features
• Recreate customer-reported issues and test scenarios using optical laboratory test equipment
• Participate in project planning, task estimation, and schedule development
• Contribute to system-level design and embedded software architecture

REQUIRED SKILLS AND EXPERIENCE

• Bachelor's degree in Electrical Engineering, Computer Engineering, Computer Science, or equivalent experience
• Strong proficiency in embedded C
• 3-5 years in embedded software engineering
• Experience leading software engineering projects (project management experience)
• Experience developing software for embedded Linux systems
• Ability to debug software at the Linux and embedded system level
• Understanding of electronic hardware fundamentals
• Experience using laboratory test equipment, such as multimeters, oscilloscopes, logic analyzers, and JTAG tools
• Familiarity with scripting languages, such as Python, and Linux command line tools, including bash scripting

NICE TO HAVE SKILLS AND EXPERIENCE

• Working knowledge of C++
• Familiarity with ARM and/or MIPS processor architectures
• Experience with SDK design, gRPC, protobuf, or similar communication

You're not the person who will settle for just any role. Neither are we. Because we're out to create Better Care for a Better World, and that takes a certain kind of person and teams who care about making a difference. Here, you'll bring your professional expertise, talent, and drive to building and managing our portfolio of iconic, ground-breaking brands. In this role, you'll help us deliver better care for billions of people around the world. It starts with YOU.

We are currently seeking a Lead Electrical Engineer – Converting, at our Chester Plant. Electrical Engineers at Kimberly-Clark initiate, design, develop, optimize and problem solve manufacturing and supporting processes. Recognized for understanding the application of technology and demonstrates the ability to interface with team members. Our engineers can identify and resolve process and equipment problems, initiate creative and practical designs which meet safety and production expectations, implement engineering and scientific analysis principles, apply engineering standards and procedures, and document work to ensure information is retrievable.

In this role, you will:

• Provide engineering support and technical guidance on resolution of process and equipment problems and any safety improvement initiative
• Initiate, design, develop, and optimize engineering solutions which meet/exceed mill expectations
• Provide guidance and support on process and qualification trials and manage engineering change for trial requests
• Provide coaching and development to team members
• Utilize lean production management techniques to design and develop improvements to the manufacturing process
• Communicate project deliverables and expectations effectively to team members
• Develop broadening mastery in technical areas important to the organization
• Document work to ensure knowledge is preserved and protected
• Facilitate work in accordance with K-C's Ways of Working

About Us

Huggies. Kleenex. Cottonelle. Scott. Kotex. Poise. Depend. Kimberly-Clark Professional. You already know our legendary brands—and so does the rest of the world. In fact, millions of people use Kimberly-Clark products every day. We know these amazing Kimberly-Clark products wouldn't exist without talented professionals, like you.

At Kimberly-Clark, you'll be part of the best team committed to driving innovation, growth and impact. We're founded on more than 150 years of market leadership, and we're always looking for new and better ways to perform – so there's your open door of opportunity. It's all here for you at Kimberly-Clark.

Led by Purpose. Driven by You.

About You

You perform at the highest level possible, and you appreciate a performance culture fueled by authentic caring. You want to be part of a company actively dedicated to sustainability, inclusion, wellbeing, and career development.

You love what you do, especially when the work you do makes a difference. At Kimberly-Clark, we're constantly exploring new ideas on how, when, and where we can best achieve results. When you join our team, you'll experience Flex That Works: flexible (hybrid) work arrangements that empower you to have purposeful time in the office and partner with your leader to make flexibility work for both you and the business.

In one of our professional roles, you'll focus on winning with consumers and the market, while putting safety, mutual respect, and human dignity at the center. To succeed in this role, you will need the following qualifications:

• Bachelor's in a related engineering discipline such as Electrical Engineering; and minimum of 5+ years of relevant engineering experience in technical or operational assignments.
• Experience with manufacturing control systems, such as: PLCs (Programmable Logic Controllers); variable speed motor drives; Motion Control (Servos); HMI (Human Machine Interfaces); distributed control systems; instrumentation; power distribution; machine safety systems.
• Expertise in Electrical Engineering with a demonstrated ability to translate that knowledge into execution of process and capacity improvements in capital or expense projects.
• Experience working with external technical service providers (TSP).
• Specification development, design review, checkout, and start up for projects
• Problem identification, problem solving methodology. Lean Six Sigma and/or Continuous Improvement experience is desirable.

Total Benefits

Here are just a few of the benefits you'd enjoy working in this role for Kimberly-Clark. For a complete overview, see support for good health with medical, dental, and vision coverage options with no waiting periods or pre-existing condition restrictions. Access to an on-site fitness center, occupational health nurse, and allowances for high-quality safety equipment.

Flexible Savings and spending accounts to maximize health care options and stretch dollars when caring for yourself or dependents.

Diverse income protection insurance options to protect yourself and your family in case of illness, injury, or other unexpected events.

Additional programs and support to continue your education, adopt a child, relocate, or even find temporary childcare.

To Be Considered

Click the Apply button and complete the online application process. A member of our recruiting team will review your application and follow up if you seem like a great fit for this role.

In the meantime, please check out the careers website.

And finally, the fine print....

For Kimberly-Clark to grow and prosper, we must be an inclusive organization that applies the diverse experiences and passions of its team members to brands that make life better for people all around the world, which is why we seek to build a workforce that encompasses the experiences of our consumers. When you bring your original thinking to Kimberly-Clark, you fuel the continued success of our enterprise. We are a committed equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity, age, pregnancy, genetic information, citizenship status, or any other characteristic protected by law.

The statements above are intended to describe the general nature and level of work performed by employees assigned to this classification. Statements are not intended to be construed as an exhaustive list of all duties, responsibilities and skills required for this position.

Employment is subject to verification of pre-screening tests, which may include drug screening, background check, and DMV check.

Veterans and members of the Reserve and Guard are highly encouraged to apply.

This role is available for local candidates already authorized to work in the role's country only.

Grade 10/P2: Grade level and / or compensation may vary based on location/country

Salary Range: 94,080 – 116,240 USD

At Kimberly-Clark, pay is just one aspect of our total rewards package, which also includes a variety of benefits and opportunities to achieve, thrive and grow. Along with base pay, this position offers eligibility for a target bonus and a comprehensive benefits suite, including our 401(k) and Profit Sharing plan. The anticipated base pay range for this role is provided above for a fully qualified hire. Actual pay will depend on several factors, such as location, role, skills, performance, and experience. Please note that the stated pay range applies to US locations only.

• Competitive salary
• Lead maintenance operations in a high-volume manufacturing facility
• Opportunity to drive reliability improvements and reduce downtime
• Work in a collaborative, unionized production environment
• Influence plant performance across safety, quality, delivery, and cost
  
  

• Lead and coach maintenance technicians to ensure safe, efficient operations
• Drive preventive and predictive maintenance programs to maximize equipment uptime
• Monitor asset performance and analyze reliability data to prevent failures
• Coordinate maintenance schedules with operations, sanitation, and engineering teams
• Ensure compliance with safety, food safety, and GMP standards
• Track maintenance activities and asset history using CMMS/EAM systems
• Develop action plans to reduce downtime, waste, and equipment failures
• Participate in plant performance meetings and implement follow-up improvements
  
  

• Be able to do the job as described
• Strong understanding of reliability fundamentals such as root cause failure analysis and downtime analysis
• Experience using CMMS/EAM systems to track asset performance and maintenance planning
• Knowledge of HACCP, food safety, and GMP standards within a manufacturing environment
• Familiarity with condition-based monitoring tools and predictive maintenance processes
  
  

• Support without hesitation General Plant Safety, Food Safety, Food Defense Initiatives and Good Manufacturing Practices with an understanding that these are absolutes and are Priority #1.
• Plans details of work order procedures; gathers required tools and materials based on instructions and specifications provided for the job.
• Fabricate, weld, and assemble stainless steel components used in bakery production equipment, conveyors, racks, and support structures.
• Perform TIG, MIG, and stick welding on stainless steel, mild steel, and aluminum materials.
• Repair damaged bakery equipment, including mixers, conveyors, ovens, pans, racks, and piping using cutting, burning, and welding techniques and equipment.
• Monitors the welding, burning, and fitting process to ensure parts are not overheated or damaged by warping, distortion, expansion, or shrinkage.
• Modify existing equipment to improve production efficiency or meet operational requirements.
• Prepares, assembles, and tacks weld parts and surfaces to be welded.
• Interpret blueprints, schematics, and fabrication drawings to complete projects accurately.
• Ensure all fabricated equipment meets food safety and sanitary welding standards for food manufacturing.
• Grind, polish, and finish welds to maintain hygienic surfaces suitable for food production.
• Work closely with the maintenance and engineering teams to support plant projects and equipment upgrades.
• Maintain welding equipment, tools, and fabrication shop area.
• Follow OSHA safety regulations and food safety policies (GMPs).
• Assist with installation of new bakery equipment and production lines.
• Notifies supervisor when faulty equipment or defective materials are discovered.
• Performs other related duties as assigned.
  
  

• Strong knowledge and experience in TIG welding as well as MIG welding.
• Thorough understanding of machines and tools used in welding including but not limited to designs, uses, maintenance and repair.
• Must have knowledge, experience and ability to weld steel, aluminum and stainless-steel using Arc, Tig, and Mig welding methods.
• Knowledge of metal cutting, grinding, and finishing
• Knowledge of fabrication layouts and measurements
• Basic understanding of design techniques, principles, and tools necessary for the precise production of technical plans, drawings, models and blueprints.
• Excellent ability to read and listen to assignments given in a variety of forms.
• Basic understanding of mathematics as it relates to welding assignments.
• Mechanical aptitude
• Ability to Problem-solve and troubleshoot equipment.
  
  

• High school diploma or GED required.
• Completion of a formal apprenticeship in welding or metal fabrication.
• Minimum 2–5 years welding/fabrication experience, preferably in food manufacturing, bakery, or industrial environments.
• Experience with stainless steel sanitary welding is strongly preferred.
• Ability to read and interpret technical drawings and blueprints.
• Knowledge of GMP, food safety, and sanitary design standards.
• Must be able to weld components that are vertical, flat, or overhead.
• Must have enough manual dexterity and stability as required for precision work.
• Must be able to see details at close range.
• Must be able to traverse facilities and machinery by climbing, balancing, lifting, walking, stooping, and carrying materials.
• May require working nights, weekends, or overtime depending on production needs.
  
  

• Repair and maintain machinery and equipment in accordance with diagrams, operational manuals and manufacturing specifications
• Direct mechanic helpers engaged in repairing and maintaining parts of machinery and equipment
• Diagnosing malfunctions in equipment and machinery based on observation of machinery and applying knowledge from experience.
• Follow operation manuals, manufacturer’s instructions and engineering specifications
• Perform preventive maintenance functions as directed
• Must be able to work well with all levels of personnel whether individually or in a team environment, and especially must be able to interface and communicate with line operators to assist with repairs and troubleshooting
• Installs, starts up and shuts down equipment in accordance with company safety procedures for machine activation and shutdown in line with OSHA requirements.
• Informs appropriate management and line mechanics of potential electrical/mechanical problems and inherent dangers involved.
• Interpret specifications, blueprints and job orders to workers
• Anticipate potential problem areas and delegate course of action to be taken
• Know where emergency STOP, and START/STOP buttons are located
• Responsible for following all Lock Out/Tag Out procedures for machine when necessary
• Must be safety conscious
• Maintain a safe and clean working environment by complying with procedures, rules and regulations
• Complete a Food Safety Incident Report if an incident occurs
• Follow all company GMP procedures.
• Support without hesitation General Plant Safety, Food Safety, Food Defense Initiatives and Good Manufacturing Practices with an understanding that these are absolutes and are Priority #1.
• Willing to work any shift and overtime as required
• Perform all special requests by Lead Mechanic/Maintenance Supervisor/ Maintenance Manager
  
  

Company Description

John Crane, a business of Smiths Group, is a global leader in mission-critical flow control solutions for energy and process industries that enable efficient and sustainable operations. Our products include mechanical seals and systems, couplings, bearings, filtration systems, and predictive digital monitoring technologies.

We have a global network of more than 200 sites in over 50 countries and employ more than 6,000 people worldwide. We partner with our customers to help them keep their operations safe, reduce downtime, improve efficiency, and meet the latest environmental standards.

John Crane is part of Smiths Group. For over 170 years, Smiths has been pioneering progress by engineering for a better future. We serve millions of people every year, helping to create a safer, more efficient, productive, and better-connected world across four global markets: energy, security & defence, space & aerospace, and general industrial. Listed on the London Stock Exchange, Smiths employs approximately 16,000 colleagues in over 50 countries.

Job Description

Under general supervision, the Seal Repair Technician is responsible for all processes related to disassembly and assembly of rotating equipment. The Seal Repair Technician follows instruction from a Repair job packet and router to perform DCI (Dismantle Clean and Inspect) and gives a written description of the wear and condition of critical components seal.

This position completes all inspection forms taking pictures of all critical components and uses inspection equipment for proper documentation of the assembly. With assistance identifies, inspects and evaluates material returned, determines repair operations, performs simple shop operations, verify specifications, initiate work and purchase orders.

Receives John Crane parts and materials returned by customers and branch offices. Evaluates from a condition of material, checks current drawing revisions and general product knowledge whether material is repairable or non-repairable.

• Identifies and inspects material returned.
• Ensures all components are properly cleaned and free from foreign material per departmental procedures
• Performs the assembly of the seal once the repair has been released to the shop and all components have been replaced or reconditioned and marked ready for assembly.
• Under close supervision, repairs returned seals and seal parts.
• May perform parts structuring, checks cost structure, and determines price of repair, ensures assembly is structured correctly, and price repair.
• Determines necessary repair operations, ensures BOM (bill of materials) / drawings / repair parts match.
• Performs simple operations on drill press (single spindle), tool post grinder, bead blast polisher and lapping machine.
• Verifies part specifications with measuring instruments such as micrometer, vernier caliper, dial indicator and optical flats.
• May initiates purchase orders for new jobs if vendors are involved.
• Consults with Engineering or Sales departments as necessary.
• Maintains necessary records and small inventory of seal parts used for repair orders.
• Works from factory work orders, prints, rework orders and verbal instructions.
• Assists newer repair personnel as necessary.
• Sets up and troubleshoots lapping machines for repair maintenance.
• May perform direct contact with customers on service and/or phone, checks computer system for credit and address information, price repairs

Qualifications

• High School Diploma or equivalent.
• Experience in mechanical assembly positions
• Experience with mechanical seals is a plus

#Smiths

Additional Information

With colleagues stretching across the globe, we are proud of our diversity. To foster inclusivity, we run employee resource groups (ERGs) to provide a safe space for employees to connect and support each other. Our cross-business ERGs include Veterans, Pride Network, Black Employee Network, Network, and Neurodiversity.

Key Role Description

The Metals Supervisor leads the mechanics and support crafts responsible for maintaining fixed equipment in the refinery. This includes, but is not limited to heaters, boilers, ducting, vessels, piping, valves, and structural steel. This role oversees union metals mechanics, contractors (union and non-union), and outside shops to successfully complete their tasks in a safe and cost-effective manner. The Metals Supervisor assures all maintenance work complies with applicable safety, engineering, safe work practice standards, laws, and regulations.

Role Specific Competencies

At Monroe, we have identified eleven specific competencies we expect all leaders of our organization to possess. These competencies are incorporated as a part of our Selection, Performance Management/Review and Developmental processes. The competencies and activities for this role are detailed below:

Technical Knowledge - demonstrates the specific skills necessary for the assignments, understands the background and points of leverage to be effective in the role.

• 
  
  
• Conduct morning tool box talks with work crews
  
  
• Directs the daily activities of metals mechanics, metals contractors, and support crafts in maintaining refinery equipment and facilities
  
  
• Achieves high levels of craft productivity through improved performance; solving problems, reliability and reducing costs.
  
  
• Review Weekly Schedule and work packages for every job and provide to work crews. Communicate changes as required
  
  
• Execute the Daily and Weekly Maintenance Schedules and communicate with Scheduler for any changes
  
  
• Prepare & Lead Pre-Job Meetings
  
  
• Adhere to the break-in work process and handle all Emergency / Break-In work as required
  
  
• Follow job plans and communicate with Planner for needed changes
  
  
• Provide Planner feedback for any planning deficiencies (Missed steps, materials, Man-hours, etc.)
  
  
• Perform follow-up rounds with crews, both Monroe and contractor, regularly throughout shift (no greater than every two hours) Items to be evaluated include:
  
  

• 
  
  
  • 
    
    
  • Following safe work practices
    
    
  • Barriers to success
    
    
  • Any required help to the crew
    
    
  • Job progress
    
    
  • Crew size and productivity
    
    
  • Work package available and job plan being followed
    
    
  
  
  
• Enforce start, stop & break times
  
  
• Work with others at peer level to ensure quick and efficient resolution to issues
  
  
• Elevate issues promptly to Leadership when required
  
  
• Confirm job plan steps in Maximo daily before 2:30 schedule meeting.
  
  
• Review following week's schedule and provide feedback by end of shift Thursday before final version
  
  
• Provide daily updates on all work under your supervision - accurate communication of end of shift status
  
  
• Communicate status of on-going work with Operations and OMC
  
  
• Arrange overtime & off-hour coverage for employees and contractors as required
  
  
• Support reliability improvements
  
  
• Support on-call maintenance system as needed throughout the year
  
  

Knowledge of Work Areas and Responsibilities - demonstrates a clear understanding of role and responsibilities within specific area, flexible and agile in adapting to changes or exploring opportunities and challenges.

• 
  
  
• Attends the daily scheduling meeting to communicate effectively with other Maintenance departments and Operations to resolve any scheduling issues, priority changes, and any problems between Crafts, Operations, Maintenance and other departments.
  
  
• Consults with the Fixed Equipment Reliability Engineering group to improve reliability and ensure that maintenance work meets the requirements of mechanical, process, metallurgical and environmental codes, policies and standards.
  
  
• Attends the daily morning maintenance and operations meeting to discuss any schedule breakers for the day and coordinate with other maintenance crafts on any exceptions to the daily schedule.
  
  
• Initiates requisitions for required materials, tools and contractor services as required including tool room materials.
  
  
• Reviews and approves employee's time.
  
  
• Knows and consistently applies company policies, procedures and the collective bargaining agreement.
  
  

Communications - Verbal and Written - includes written and verbal communications, delivers presentations and has good listening skills.

Problem Solving and Conflict Leadership - strives to understand contributing factors, works to resolve complex situations, and helps individuals to resolve conflicts.

Delivering Results - Sense of Urgency - defines appropriate goals, works toward achieving goals, articulates vision and steps for achievement, meets deadlines and provides timely status updates and follow-through.

Teamwork/Cooperation - accountable to team, works to meet established deliverables, appreciates view of team members and is respectful of others.

Initiative - takes action, seeks new opportunities, and strives to see projects to completion.

Work Reliability/Quality - strives to eliminate errors, accurate work is a priority, and seeks opportunities to improve product/services.

Integrity and Trust - honest, accountable, upholds ethics standards and maintains confidentiality.

Leadership Capability - provides strong leadership, sets a good example, skilled decision maker, motivator and encourager.

People Development/Coaching - offers feedback, coaches employees appropriately, rewards employees wisely, takes mentoring role, challenges and develops employees and offers opportunity.

• 
  
  
• Interacts with direct reports on a daily basis to ensure clear and open communications; alignment with goals and objectives; and to proactively address progress, concerns and questions.
  
  

Education, Experience, and Skill Requirements

Minimum Qualifications:

• 
  
  
• 5 years of maintenance supervisory experience in a high-risk industry such as refining, petrochemical, or chemical processing.
  
  
• High School Diploma or equivalent experience required; AA or BS Degree preferred.
  
  
  • 
    
    
  • Proficient with Microsoft Word, Outlook, and Excel as well as CMMS software.
    
    
  • Demonstrated proficiency in all of Role Specific Competencies.
    
    
  
  
  

Company Description

Battaglia Electric, Inc. specializes in electrical contracting, telecommunications, security, audio-visual (AV), and distributed antenna systems (DAS) installations. With over 30 years of experience, Battaglia is committed to delivering manufacturer-certified installations while ensuring safety, quality, and customer satisfaction. We work across diverse industries, including corporate, utility, data center, healthcare, transportation, and higher education, offering services for projects ranging from under $5 million to over $40 million. Our expert team focuses on developing and maintaining long-term relationships by delivering reliable and efficient solutions on time and within budget. The company is based in New Castle, Delaware, and provides comprehensive electrical and power services, including installation, maintenance, and emergency restoration.

Role Description

This is a full-time, on-site role for an Assistant Project Manager located in Essington, PA. The Assistant Project Manager will assist in overseeing project timelines, budgets, and deliverables to ensure successful project execution. Key responsibilities include expediting project components, assisting in logistics management, coordinating inspections, supporting project documentation, and ensuring all work meets quality and safety standards. The role demands effective collaboration with various teams to achieve project goals seamlessly.

Qualifications

• Proficiency in Expediting and Logistics Management
• Strong skills in Project Management, including organization and prioritization
• Familiarity with Inspection and quality assurance processes
• Understanding of team coordination and progress monitoring
• Excellent communication and interpersonal abilities
• Proven attention to detail and problem-solving skills
• Bachelor’s degree in Electrical Engineering or equivalent experience preferred
• Experience in the electrical or related industries is a strong advantage

Position Description

Ryder is hiring a Senior Level Diesel Technician in Woolwich Township, New Jersey — offering weekly pay, excellent benefits, and a Technician career you can feel good about.

Hear it from a Ryder Technician Employee Here:

• 
  
• Hourly Pay: $30.50 per hour
  
  
• Certification Bonus of $100 for each New ASE Certification Obtained up to $700
  
  
• Quarterly Bonus: Ryder Pays you up to $500 Every Quarter - Four Times Per Year
  
  
• Schedule: Monday–Friday Weekends OFF
  
  
• Hours: Second Shift 2:30 pm – 11:00 pm
  
  

We want the right Maintenance Repair Mechanic to join us at Ryder to work on Heavy Duty Vehicles

Apply Here with Ryder Today

Spots are filling fast — click apply now to secure your spot.

Questions? Call Dominique or text “Woolwich Township” to 9 to speak with your recruiter today.

All the benefits you expect — without the wait.

• 
  
• Medical, Dental, Vision after 30 days
  
  
• 80 hours PTO your first year, starting Day 1
  
  
• Yearly merit pay increases
  
  
• 401 (k) company match
  
  
• PPE, uniforms, and boot allowance
  
  
• Build your skills - paid training
  
  
• Safety‑first workplace & State-of-the-art equipment
  
  
• Top Tech Competition: Earn $250 – $50,000 per year
  
  
• U.S. military veterans - extra paid day off
  
  
• 15% company stock discount
  
  
• Up to $5,000 in Tech tuition repayment
  
  
• 12 weeks paid maternity leave (subject to specific eligibility criteria, including work tenure)
  
  
• Employee discounts on tools, vehicles, travel, tech & more
  
  

Click Here to See All Ryder Careers:

We want YOU to join our family made up of Proud Women and Men in Logistics who work alongside Military Reserve and Veterans we hire everyday

Refer anyone and get rewarded with UNLIMITED bonuses up $1,500 for every Ryder hired Diesel Mechanic, Service Employee, Driver, Warehouse Associate and more!

EEO/AA/Female/Minority/Disabled/Veteran

Requirements

• 
  
• High school diploma or equivalent preferred
  
  
• Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred
  
  
• Basic tools, required
  
  
• Demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:
  
  
• Routine preventative maintenance, which should include oil changes, brake and tire work
  
  
• Basic diagnostics and repairs, including AC and electrical systems, required
  
  
• Three (3) years or more relevant work experience, preferred
  
  
• All other certification as required by location, required
  
  
• Valid Commercial Driver License (CDL) CLASS A,preferred
  
  
• All other certification as required by location, required
  
  
• ADDITIONAL REQUIREMENTS:
  
  
• Must have a minimum of 2 years of experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment
  
  
• Knowledge of and the ability to apply knowledge of computer skills: PC, Windows, mouse, etc.
  
  
• This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:
  
  
• Must be able to obtain CDL within 6 months after hire
  
  
• Pass a Ryder Drug Test
  
  
• Pass a DOT physical
  
  
• Pass a Ryder road test
  
  
• Pass a Ryder Background and Motor vehicle check including Drug and alcohol verification from previous employers for the last 3 years
  
  

Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned.

Responsibilities

• 
  
• Performs vehicle maintenance and repair duties including:
  
  
• Performs standard vehicle maintenance
  
  
• Performs preventive maintenance
  
  
• Diagnoses complex mechanical and electronic problems utilizing diagnostic computer when applicable
  
  
• Completes complex and detailed mechanical inspections & repairs with minimal supervision
  
  
• Replaces defective components as instructed
  
  
• Works unsupervised on most tasks
  
  
• Performs facility maintenance duties
  
  
• Interacts with customers/drivers to properly determine nature of complaint once assigned a task.
  
  
• Utilizes key functions of Shop Management System and electronic documentation available.
  
  
• Works in accordance with all federal/ provincial and corporate compliance guidelines (i.e., safety, DOT, MOT).
  
  
• Acts as mentor for Tech 1 and Tech 2 levels.
  
  
• Demonstrate the ability to access and use internal and external maintenance documents.
  
  
• Other support duties as required to support operations. These could include but are not limited to Service Island support
  
  
• SBTIII trained within 180 days (SBT220)
  
  
• Complete 2 of the OEM On-Line diagnostic scan tool software courses as required by location fleet mi. (predominant OEM of fleet mix completed within 365days)
  
  

Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability.

Posted Date 1 week ago (3/11/2026 1:05 PM)

Requisition ID 2

Location (Posting Location) : State/Province NJ

Location (Posting Location) : City WOOLWICH TOWNSHIP

Location (Posting Location) : Postal Code 08085

Category Technicians/Service Employees5

Employment Type Regular-Full time

Travel Requirements 0-10%

Position Code 1000356

Min Pay USD $30.50/Hr.

Max Pay USD $30.50/Hr.