Engineering Jobs in Springboro Ohio Flexible

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance:

Pratt & Whitney is working to once again transform the future of flight—designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we’re seeking the people to drive it. So, calling all curious. 

Come ready to explore and you’ll find a place where your talent takes flight—beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we’ll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that’s evolving fast to the future.

At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond?

What You Will Do:

• Follow specific directions of Leader/Supervisor to carry out repair and restoration projects for engine parts.
• Layout work requirements and obtain needed equipment to perform routine repair and alteration operations.
• Perform bench repair operations to restore parts where close tolerances are not normally required and specifically defined criteria are used.
• Recognize need and arrange for repair or replacement of equipment used in performing the work as necessary.
• .Perform routine servicing throughout the assigned area following specified procedures and written instructions such as operator’s check list for upkeep and to assure equipment operates properly.
• Assist others responsible for new process tryout, and other specialized assignments within the scope and skill level of this job description.
• .Refer difficulties to Leader/Supervisor.
• Maintain logs and records as requested to communicate findings and prepare requests for approval.
• May be required to train for, obtain and maintain licenses, operator permits, and certifications within assigned area.
• May be assigned to carry out tasks not specifically listed, within the scope and skill level of this job description in support of department objectives and to develop individual’s skills.

2nd shift hours are Monday through Friday from approximately 3 pm to 12 am.

Qualifications You Must Have:

• High School Diploma or GED.

• U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract.

• Able to obtain/ maintain active Security Clearance after Day 1 of work.

• 2 years of experience in blueprint reading, CNC manual machining & reading. Knowledge of shop math.

Qualifications We Prefer: In compliance with the collective bargaining agreement, priority consideration is given to candidates who are INTERNAL (and recall) to the Pratt & Whitney IAM Bargaining Unit members of District Lodge 26 and Affiliated Locals 700 and 1746 (Connecticut Operations).

  Pratt & Whitney in Middletown, CT is a FAA regulated facility and as such under the U.S. Departments of Transportation’s Federal Aviation Administration (FAA). This position is considered safety sensitive in accordance with FAA Guidelines. Candidate will be subject to drug and alcohol testing per FAA’s regulation 14 CFR part 120, as well as 49 CFR part 40.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

Pratt & Whitney is working to once again transform the future of flight—designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we’re seeking the people to drive it. So, calling all curious. Come ready to explore and you’ll find a place where your talent takes flight—beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we’ll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that’s evolving fast to the future.

At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond?

What You Will Do:

Our Pratt & Whitney Middletown, CT facility has several exciting opportunities for a Production Machinist available on 3rd shift .

3rd shift hours are Monday through Friday from approximately 11:00 pm to 7:00 am.

In this role, you will setup and operate one machine tool or process equipment type and operate more than one unrelated machine tool or process equipment types within an assigned area to produce precision turbine engine parts. You will perform work where methods, procedures and processes are well developed and the required tooling, gaging and fixturing are provided.

• Under the direction of leader/supervisor, work from verbal and written instructions, operation sheets, drawings and other pertinent information. Following established methods and procedures, use manual or numerically controlled machine tools such as milling, boring, grinding, turning, broaching and shaping machines to achieve the required dimensional specifications. Recognize indications of dull or damaged cutting tools and replace as needed.

• Perform bench, assembly and surface finishing operations such as deburring, blending, trimming and fitting, using a variety of hand and power tools. Follow prescribed methods and procedures to perform drilling, riveting and bonding operations to assemble various details in producing a finished part. Operate part-marking equipment.

• Use a variety of media, dry or liquid, to perform cleaning or part preparation and finishing operations. Operate tumbling, grit blast, shot peen, buffing and polishing equipment, wash machines and dip tanks for part surface conditioning. Apply masking as required. Perform applications of anti-gall and polymite coatings utilizing dry bake ovens to cure.

• Utilize a variety of fixed or variable measuring instruments to check dimensions and part features. Operate OpCert and other computer–based systems to retrieve and store information and records.

• Perform routine servicing throughout assigned area following specified procedures and written instructions, such as operators’ checklist, for upkeep and to assure equipment operates properly.

• May be required to train for, obtain and maintain licenses, operator permits and certifications within assigned area.

Qualifications You Must Have:

• High School Diploma or GED equivalent with 6 months of machining experience

In compliance with the collective bargaining agreement, priority consideration is given to candidates who are INTERNAL (and recall) to the Pratt & Whitney IAM Bargaining Unit members of District Lodge 26 and Affiliated Locals 700 and 1746 (Connecticut Operations).

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Position Summary:

The purpose of the Quality Manager is to lead and manage our Quality Management System (QMS) and ensure that products, processes, and services consistently meet internal standards and customer expectations.

This role is responsible for ISO 9001 compliance, customer complaint resolution, CAPA management, internal and external audits, process improvement initiatives, and fostering a strong quality culture across operations. The Quality Manager partners cross-functionally with Operations, Engineering, Supply Chain, Service, and Sales to drive continuous improvement and operational excellence.

Key Responsibilities

• Provide leadership and guidance for Quality Assurance activities supporting Operations, Sales, Service, Distributors, and Customers.
• Support the development and maintenance of the Quality Policy and Quality Management System (QMS), ensuring quality objectives are established, tracked, and achieved.
• Develop and execute an internal audit program; conduct audits and support customer and regulatory inspections.
• Ensure timely response to customer complaints and support resolution within established service standards.
• Support Quality System deployment, including implementation, documentation control, regulatory compliance, and product release sign-offs.
• Plan and implement quality policies, procedures, and continuous improvement initiatives to ensure products and services meet internal and customer standards.
• Conduct Management Review meetings to ensure ongoing performance and effectiveness of the Quality Management System.
• Design and implement quality control methods, process improvement initiatives, inspection standards, and testing procedures using Lean and/or Six Sigma methodologies.
• Define and clarify roles and responsibilities related to quality throughout the organization.
• Utilize statistical and analytical tools to identify process improvement opportunities.
• Lead and track quality improvement projects focused on cost reduction, defect reduction, and process standardization.
• Manage Corrective and Preventive Action (CAPA) processes.
• Analyze trends and lead investigations related to product complaints and internal nonconformances.
• Support customer and distributor quality-related communications and issue resolution.
• Ensure ISO 9001 certification compliance for facilities and related activities.
• Lead by example in root cause analysis and proactive problem-solving.
• Support cross-functional continuous improvement initiatives in collaboration with Operations, Engineering, Supply Chain, Finance, and other departments.
• Drive measurable improvements using Lean manufacturing principles.
• Provide training and guidance to employees on quality standards, procedures, and expectations.
• Ensure products and components—from raw materials to finished goods—meet internal and customer quality standards.
• Prepare and maintain quality documentation, including policies, procedures, manuals, work instructions, and training materials.
• Oversee the ISO 9001 program, including compliance, documentation, and audit coordination.
• Respond to facility requests related to quality standards, documentation, and regulatory clarification.
• Conduct compliance audits to assess adherence to quality standards and company policies; provide recommendations for corrective actions.
• Stay current on industry standards, regulatory updates, and quality best practices.
• Perform other duties as assigned.

Qualifications and Skills:

• Minimum of five (5) years of progressive experience in Quality Management within a manufacturing environment.
• Bachelor’s degree in Quality, Engineering, or related technical field required; Master's degree preferred. Equivalent combination of education and experience may be considered.
• ISO 9001 experience required (implementation, maintenance, and audit support).
• Experience with CAPA and structured root cause analysis methodologies.
• Lean Manufacturing and/or Six Sigma certification (Green Belt or Black Belt) preferred.
• Strong understanding of manufacturing processes and quality control methods.
• Proven ability to resolve Sales/Service and Customer quality issues.
• Proficient in ISO Quality System Standards.
• Excellent analytical, decision-making, and problem-solving skills.
• Strong interpersonal, communication, and organizational skills.
• Proficient in Microsoft Office (Word, Excel, PowerPoint) and able to navigate ERP systems and document management software.

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance:

Pratt & Whitney is working to once again transform the future of flight—designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we’re seeking the people to drive it. So, calling all curious. 

Come ready to explore and you’ll find a place where your talent takes flight—beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we’ll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that’s evolving fast to the future.

At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond?

We have an immediate need for a Production Machinist/Processor C 3rd shift (Onsite)

FUNCTION: Setup and operate one machine tool or process equipment type and operate more than one unrelated machine tool or process equipment types within an assigned area to produce precision turbine engine parts. Perform work where methods, procedures and processes are well developed and the required tooling, gaging and fixturing are provided.

What You Will Do:

Job Description

• Under the direction of leader/supervisor, work from verbal and written instructions, operation sheets, drawings and other pertinent information. Following established methods and procedures, use manual or numerically controlled machine tools such as milling, boring, grinding, turning, broaching and shaping machines to achieve the required dimensional specifications.

• Recognize indications of dull or damaged cutting tools and replace them as needed.

• Perform bench, assembly and surface finishing operations such as deburring, blending, trimming and fitting, using a variety of hand and power tools.

• Follow prescribed methods and procedures to perform drilling, riveting and bonding operations to assemble various details in producing a finished part. Operate part-marking equipment.

• Use a variety of media, dry or liquid, to perform cleaning or part preparation and finishing operations. Operate tumbling, grit blast, shot peen, buffing and polishing equipment, wash machines and dip tanks for part surface conditioning.

• Apply masking as required. Perform applications of anti-gall and polymite coatings utilizing dry bake ovens to cure.

• Utilize a variety of fixed or variable measuring instruments to check dimensions and part features. Operate OpCert and other computer–based systems to retrieve and store information and records.

Refer difficulties to leader or supervisor.

Perform routine servicing throughout assigned area following specified procedures and written instructions, such as operators’

checklist, for upkeep and to assure equipment operates properly.

May be assigned to carry out tasks, not specifically listed, within the scope and skill level of this job description in support of department objectives and to develop individuals skills.

Qualifications You Must Have:

• High School Diploma or GED.

• U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract.

Qualifications we prefer:

• 1-3 years of machining experience.

Qualifications We Value: In compliance with the collective bargaining agreement, priority consideration is given to candidates who are INTERNAL (and recall) to the Pratt & Whitney IAM Bargaining Unit members of District Lodge 26 and Affiliated Locals 700 and 1746 (Connecticut Operations).

 Pratt & Whitney in East Hartford, CT is a FAA regulated facility and as such under the U.S. Departments of Transportation’s Federal Aviation Administration (FAA). This position is considered safety sensitive in accordance with FAA Guidelines. Candidate will be subject to drug and alcohol testing per FAA’s regulation 14 CFR part 120, as well as 49 CFR part 40.

Learn More & Apply Now!

Must be a U.S. Citizen. This position may require access to systems/tools that are restricted to individuals who possess US citizenship.

 In addition to transforming the future of flight, we are also transforming how and where we work. We’ve introduced role types to help you understand how you will operate in our blended work environment.

This role is:

Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines.

Candidates will learn more about role type and current site status throughout the recruiting process. For onsite and hybrid roles, commuting to and from the assigned site is the employee’s personal responsibility.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Power Distribution and Make Ready Designer

Overhead Utility Pole Design • Joint-Use Engineering • NESC-Compliant Make-Ready Work

Location: Roanoke, VA (Remote)

Are you an experienced Power Distribution Designer or Make-Ready Designer looking to support meaningful utility engineering projects? Join a team that values accuracy, collaboration, and long-term professional growth.

ABOUT THIS OPPORTUNITY
We are seeking skilled Make-Ready Designers (primary focus) and Power Distribution Designers to support engineering programs for major electric and telecom utilities. Ideal candidates bring demonstrated experience in overhead utility pole design, NESC application, clearance assessment, pole loading analysis, and construction package development. Useful design platforms include DDS, Katapult, O-Calc, GIS, MicroStation, AutoCAD, or client-specific drafting systems.

In this role, you will review field/walkout data, evaluate existing attachment conditions, model pole loading, determine make-ready requirements, and prepare accurate construction-ready deliverables. Applicants without utility pole design or distribution engineering experience will not be considered.

Note: This position is remote, but new hires must attend a 2-week paid, in-person orientation at our Perrysburg, OH headquarters.

WHAT YOU WILL DO
• Execute overhead distribution and make-ready design work orders while meeting quality, time, and budget expectations
• Apply established engineering design standards, NESC requirements, and internal processes
• Perform end-to-end make-ready, joint-use, and/or general distribution design
• Conduct permitting and easement research (pole ownership, ROW, property rights, approvals)
• Collaborate with team members to resolve design challenges and ensure accurate deliverables
• Use design software such as AutoCAD, MicroStation, DDS, PoleForeman, O-Calc, Katapult, or client systems
• Perform quality control reviews when required
• Support additional duties as assigned

TOP COMPETENCIES & SKILLS
Make-Ready Engineering, Joint-Use Design, Pole Loading Analysis, Utility Pole Design, Overhead Distribution Design, NESC Compliance, Utility Engineering, Pole Attachments, Make-Ready Construction, Aerial Design, Utility Coordination, Right-of-Way Permitting, Pole Replacement Design, Make-Ready Estimates, Field Survey Interpretation, CAD for Utility Design, GIS for Utility Design, Electrical Distribution Design, Utility Construction Standards, Telecommunications Make-Ready

WHAT WE’RE LOOKING FOR
• High school diploma or equivalent required; an associate degree or higher in engineering, drafting, or a related field is preferred
• Minimum 2 years of experience in make-ready engineering, joint-use design, or electric power distribution design (3+ years strongly preferred)
• Proven experience in utility pole design, including NESC application, clearance analysis, pole loading concepts, and preparation of construction-ready design packages
• Proficiency with CAD or MicroStation; experience with DDS, Katapult, O-Calc, or similar utility design platforms is strongly preferred
• Solid understanding of power distribution construction practices, with the ability to learn utility-specific proprietary systems efficiently
• Must hold a valid driver’s license, maintain active auto insurance, and pass all required background, drug, and MVR screenings
• Authorization to work in the United States is required
• Willingness to travel occasionally, including minimal overnight travel when project needs require
• Ability to work a standard Monday–Friday schedule aligned to Eastern Time, with Central/Mountain/Pacific adjustments as appropriate

PHYSICAL REQUIREMENTS
• Ability to work for extended periods using a computer keyboard, monitor, and telephone
• Ability to prepare and analyze data, review detailed information, and work with design tools requiring close vision, distance vision, color vision, peripheral vision, depth perception, and focus adjustment
• Ability to communicate effectively through oral and written channels

ABOUT SIGMA TECHNOLOGIES
Sigma Technologies is a growing engineering and design firm with 500+ team members across 30+ states. For over 25 years, we’ve supported major power and telecommunications utilities with work that directly impacts communities nationwide. Our core values — Safety, Honesty, Truth, and Decency — shape how we work and who we hire. We are TeamSigma™.

*To learn more about working at Sigma, view our video and career page.
* If you do not have Power Design experience, please refer to our other open positions: *While Designer openings are listed in multiple locations, you only need to apply to one, as they are remote roles.

WHAT WE OFFER
We want our Associates to stay healthy, happy, and secure. We offer a positive work environment with supportive coworkers, managers, and leaders, plus:

• No-cost monthly healthcare plan option for employees
• Competitive pay
• Medical, dental, and vision plans with up to 80% of the premium sponsored by Sigma
• 401(k) plan with matching contributions up to 5% of salary
• Paid holidays, vacation, and sick time
• Education and professional licensing assistance programs

This job advertisement is intended to outline the primary responsibilities and requirements of the role. It is not all-inclusive. Additional duties may be assigned as needed. This ad does not constitute an employment agreement, and job requirements may change based on organizational needs.

Pay is commensurate with experience and education. Sigma is an equal opportunity employer and does not discriminate based on race, color, gender, sexual preference, gender identity, age, religion, national origin, disability, genetic information, veteran/military status, or any classification protected by law.

PM22

PI80414dffc879-38

Location Details: United States - Remote

At GoDaddy the future of work looks different for each team. Some teams work in the office full-events or offsites. This is a remote position, so you'll be working remotely from your home. You may occasionally visit a GoDaddy office to meet with your team for events or offsites.

This position is not eligible to be performed in Alaska, Mississippi, North Dakota, or the Virgin Islands.

GoDaddy is not currently considering candidates for this role in California, Seattle, or NYC.

Join our team 

Do you want to be an Information Security Leader at GoDaddy? GoDaddy's Product Security group is looking for a Principal Security Engineer to join our organization. Can you solve large scale and cross-company issues, while ensuring that partnership with the development and operational communities remains in front of mind?

GoDaddy is looking for a Principal Security Engineer to apply their hands-on technical skills, strong leadership abilities, and an eagerness to design solutions to complex problems. You must be comfortable with communicating to stakeholders, performing security assessments and prioritizing security risks, creating/presenting high-quality deliverables.

What you'll get to do...

• Identify security threats in applications and infrastructure and provide remediation mentorship to system owners.
• Join forces with SRE and development teams to find new and creative ways to reduce the occurrence of vulnerabilities at scale.
• Build repeatable/reusable security processes and frameworks.
• Review quality issues and work towards detecting security flaws both obvious and discrete.
• Assist with scoping prospective projects, participating in projects from kickoff through "definition of done" via end-to-end ownership.
• Use your industry experience to own and drive resolution and retest complex security events, policy questions and technical security risks.

Your experience should include...

• 7+ years of progressive security engineering experience across Security Architecture, Cryptography, Network, Cloud, Mobile, and Web Security.
• Skilled in Secure Development Lifecycle, Security by Design, and Shift Left methodologies.
• Proficient in Threat Modeling, Architecture Review, Penetration Testing, Code Review, SAST, and DAST.
• Strong scripting abilities in languages such as Python, C, C++, Java, Ruby, and PowerShell.
• Adept at applying security best practices for compliance, with excellent problem-solving and communication skills.

You might also have...

• Bachelor's degree in computer science or related field.
• Master's degree or PhD in Computer Science or related field.
• Hosting industry and/or cloud Experience.
• Experience in hardware security.

We've got your back... We offer a range of total rewards that may include paid time off, retirement savings (e.g., 401k, pension schemes), bonus/incentive eligibility, equity grants, participation in our employee stock purchase plan, competitive health benefits, and other family-friendly benefits including parental leave. GoDaddy's benefits vary based on individual role and location and can be reviewed in more detail during the interview process.

We also embrace our diverse culture and offer a range of Employee Resource Groups (Culture). Have a side hustle? No problem. We love entrepreneurs! Most importantly, come as you are and make your own way. 

About us...  GoDaddy is empowering everyday entrepreneurs around the world by providing the help and tools to succeed online, making opportunity more inclusive for all. GoDaddy is the place people come to name their idea, build a professional website, attract customers, sell their products and services, and manage their work. Our mission is to give our customers the tools, insights, and people to transform their ideas and personal initiative into success. To learn more about the company, visit About Us. 

At GoDaddy, we know diverse teams build better products—period. Our people and culture reflect and celebrate that sense of diversity and inclusion in ideas, experiences and perspectives. But we also know that's not enough to build true equity and belonging in our communities. That's why we prioritize integrating diversity, equity, inclusion and belonging principles into the core of how we work every day—focusing not only on our employee experience, but also our customer experience and operations. It's the best way to serve our mission of empowering entrepreneurs everywhere, and making opportunity more inclusive for all. To read more about these commitments, as well as our representation and pay equity data, check out our Diversity and Pay Parity annual report which can be found on our Diversity Careers page.

GoDaddy is proud to be an equal opportunity employer. GoDaddy will consider for employment qualified applicants with criminal histories in a manner consistent with local and federal requirements. Refer to our full EEO policy.

Our recruiting team is available to assist you in completing your application. If they could be helpful, please reach out to  

Colorado Residents: In any materials you submit, you may redact or remove age-identifying information such as age, date of birth, or dates of school attendance or graduation. You will not be penalized for redacting or removing this information.

GoDaddy doesn't accept unsolicited resumes from recruiters or employment agencies.

Location Details: United States - Remote

At GoDaddy the future of work looks different for each team. Some teams work in the office full-events or offsites. This is a remote position, so you'll be working remotely from your home. You may occasionally visit a GoDaddy office to meet with your team for events or offsites.

This position is not eligible to be performed in Alaska, Mississippi, North Dakota, or the Virgin Islands.

GoDaddy is not currently considering candidates for this role in California, Seattle, or NYC.

Join our team 

Do you want to be an Information Security Leader at GoDaddy? GoDaddy's Product Security group is looking for a Principal Security Engineer to join our organization. Can you solve large scale and cross-company issues, while ensuring that partnership with the development and operational communities remains in front of mind?

GoDaddy is looking for a Principal Security Engineer to apply their hands-on technical skills, strong leadership abilities, and an eagerness to design solutions to complex problems. You must be comfortable with communicating to stakeholders, performing security assessments and prioritizing security risks, creating/presenting high-quality deliverables.

What you'll get to do...

• Identify security threats in applications and infrastructure and provide remediation mentorship to system owners.
• Join forces with SRE and development teams to find new and creative ways to reduce the occurrence of vulnerabilities at scale.
• Build repeatable/reusable security processes and frameworks.
• Review quality issues and work towards detecting security flaws both obvious and discrete.
• Assist with scoping prospective projects, participating in projects from kickoff through "definition of done" via end-to-end ownership.
• Use your industry experience to own and drive resolution and retest complex security events, policy questions and technical security risks.

Your experience should include...

• 7+ years of progressive security engineering experience across Security Architecture, Cryptography, Network, Cloud, Mobile, and Web Security.
• Skilled in Secure Development Lifecycle, Security by Design, and Shift Left methodologies.
• Proficient in Threat Modeling, Architecture Review, Penetration Testing, Code Review, SAST, and DAST.
• Strong scripting abilities in languages such as Python, C, C++, Java, Ruby, and PowerShell.
• Adept at applying security best practices for compliance, with excellent problem-solving and communication skills.

You might also have...

• Bachelor's degree in computer science or related field.
• Master's degree or PhD in Computer Science or related field.
• Hosting industry and/or cloud Experience.
• Experience in hardware security.

We've got your back... We offer a range of total rewards that may include paid time off, retirement savings (e.g., 401k, pension schemes), bonus/incentive eligibility, equity grants, participation in our employee stock purchase plan, competitive health benefits, and other family-friendly benefits including parental leave. GoDaddy's benefits vary based on individual role and location and can be reviewed in more detail during the interview process.

We also embrace our diverse culture and offer a range of Employee Resource Groups (Culture). Have a side hustle? No problem. We love entrepreneurs! Most importantly, come as you are and make your own way. 

About us...  GoDaddy is empowering everyday entrepreneurs around the world by providing the help and tools to succeed online, making opportunity more inclusive for all. GoDaddy is the place people come to name their idea, build a professional website, attract customers, sell their products and services, and manage their work. Our mission is to give our customers the tools, insights, and people to transform their ideas and personal initiative into success. To learn more about the company, visit About Us. 

At GoDaddy, we know diverse teams build better products—period. Our people and culture reflect and celebrate that sense of diversity and inclusion in ideas, experiences and perspectives. But we also know that's not enough to build true equity and belonging in our communities. That's why we prioritize integrating diversity, equity, inclusion and belonging principles into the core of how we work every day—focusing not only on our employee experience, but also our customer experience and operations. It's the best way to serve our mission of empowering entrepreneurs everywhere, and making opportunity more inclusive for all. To read more about these commitments, as well as our representation and pay equity data, check out our Diversity and Pay Parity annual report which can be found on our Diversity Careers page.

GoDaddy is proud to be an equal opportunity employer. GoDaddy will consider for employment qualified applicants with criminal histories in a manner consistent with local and federal requirements. Refer to our full EEO policy.

Our recruiting team is available to assist you in completing your application. If they could be helpful, please reach out to  

Colorado Residents: In any materials you submit, you may redact or remove age-identifying information such as age, date of birth, or dates of school attendance or graduation. You will not be penalized for redacting or removing this information.

GoDaddy doesn't accept unsolicited resumes from recruiters or employment agencies.