Engineering Jobs in Spring Valley Ny Remote

The Rockland County Department of Highways, Drainage Division, is seeking a Director of the Drainage Agency. The work is specialized diverse, and complex in nature.

This is administrative and managerial work of a complex nature that involves responsibility for developing and implementing policies and procedures to implement safe, efficient and modern stream maintenance and drainage programs. The work is performed under the general direction of the Superintendent of Highways and in accordance with Federal and New York State applicable laws and regulations and Rockland County objectives and policies. Supervision is exercised over professional and technical employees. Develops policies and procedures with respect to drainage programs and makes recommendations to the Superintendent of Highways regarding same. Arranges for the engineering, construction, improvement, repair and maintenance of County streams, water courses, drainage courses, and tributaries and ensures that services are in compliance with policies and regulations. Oversees the administration of drainage-related capital projects, including but not limited to monitoring funding, supervising contract bid processes, ensuring compliance with regulations and project requirement. Responds to emergencies (e.g. severe flooding) by inspecting and monitoring flooding and related conditions, acting as liaison with County officials and first responders to exchange information and resolve problems, preparing reports regarding flood damage and related conditions in order to obtain New York State and Federal funding. Completes applications and prepares documents to secure New York State Department of Environmental Conservation (DEC) permits, as needed, regarding dam safety, streams, aquatic habitats, wetland programs, etc. Acts as liaison to a variety of governmental agencies and units of government, as needed, including but not limited to the Army Corp of Engineers, the New York State Department of Environmental Conservation, towns and village, etc. Approves plans, specifications and estimates for construction, maintenance and repair of stream watercourses and tributaries. Directs the control of trees, brush and weeds within the bounds of County streams. Plans and directs a program to inform residents about the programs and functions of the Drainage Agency. Oversees the Drainage Agency’s permit application process and ensures compliance with the Rockland County Stream Control Act as it applies to activities within areas under the jurisdiction of the Drainage Agency. Plans and directs a Stream Maintenance program, maintains records and makes reports. Acts for and in place of the Superintendent of Highways with respect to drainage matters, as needed. May provide legal opinions regarding Federal, New York State, and Rockland County laws that pertain to drainage matters. May inventory and purchase machinery, equipment and materials.

Thorough knowledge of New York State Department of Environmental Conservation requirements and regulations, thorough knowledge of general practices and regulations regarding stream maintenance and general construction procedures. Good knowledge of administrative procedures and techniques, especially as they pertain to a comprehensive modern stream maintenance and drainage programs, ability to plan, develop and implement general policies and procedures for a modern and efficient stream and drainage system, including stream maintenance and construction. Ability to establish and maintain cooperative relationships with others, including elected officials and Federal and New York representatives. Have the ability to understand and interpret laws and regulations that pertain to drainage-related matters. Ability to effectively communicate, both orally and in writing Also does related work as required.

Minimum Qualifications:

• A Bachelor’s degree or higher in Civil Engineering, Civil Engineering Technology, Environmental Engineering, or comparable curriculum or;
• A New York State license to practice law and
• Four (4) years of post-degree supervisory, administrative or management experience that substantially involved responsibility for drainage and/or environmental programs and projects (e.g., development of policies and procedures, supervision of staff, enforcement, providing legal opinions and/or litigating related matters, overseeing the implementation of programs and projects, etc.).

Other Requirements and Information:

• Must be a Resident of Rockland County.
• This is a competitive position in Civil Service and reachability on an eligible list following a civil service examination would be a requirement for permanent appointment.

Salary and Benefits:

Salary and benefits are competitive with the public sector market including but not limited to the following:

• $122,000.00 Annual Salary (as of January 1, 2026)
• 40 Hour work week
• Medical, Dental and Vision
• Time off including vacation, personal and holiday time
• New York State Pension eligibility
• Other benefits, including, but not limited to deferred compensation, tuition reimbursement, leadership and other professional development training

How to Apply:

Interested candidates should email a completed Rockland County employment application, to

Click here to access the online application.

Position open until filled.

Summary

We are seeking a highly skilled Data Engineer to build and manage our data infrastructure. The ideal candidate will be an expert in writing complex SQL queries, designing efficient database schemas, and developing ETL/ELT pipelines. You will ensure data is accurate, accessible, and optimized for performance to support business intelligence, analytics, and reporting needs.

Key Responsibilities

• Database Design & Management: Design, develop, and maintain relational databases (e.g. SQL Server, ProgressSQL, Oracle) and cloud-based data warehouses.
• Strategic SQL and Data Engineering: Develop sophisticated, optimized SQL queries, stored procedures, and functions to process and analyze large, complex datasets for actionable business insights.
• Data Pipeline Automation & Orchestration:Help build, automate, and orchestrate ETL/ELT workflows utilizing SQL, Python, and cloud-native tools to integrate and transform data from diverse, distributed sources.
• Performance Optimization: Tune queries and optimize database schema (indexing, partitioning, normalization) to improve data retrieval and processing speeds.
• Data Integrity & Security: Ensure data quality, consistency, and integrity across systems. Implement data masking, encryption, and role-based access control (RBAC).
• Documentation: Maintain technical documentation for database schemas, data dictionaries, and ETL workflows.

Required Skills and Qualifications

• Education: Bachelor’s degree in computer science, Information Systems, or a related field.
• SQL Mastery: 5+ years of experience with advanced SQL (window functions, CTEs, query optimization).
• Database Expertise: Deep understanding of relational database management systems (RDBMS) and data modeling techniques.
• Cloud Platforms: Demonstrated experience with Azure Data Services and other data warehouse technologies.
• Programming: Proficiency in Python for scripting and data manipulation.
• ETL Tools: Familiarity with tools like SSIS or Azure Data Factory.
• Soft Skills: Strong analytical thinking, problem-solving, and communication skills.

Nice to Have

• Experience with NoSQL databases (Cosmos DB, MongoDB).
• Experience with big data frameworks (Apache Spark, Kafka).
• Relevant certifications (e.g., Microsoft Certified: Azure Data Engineer Associate, Google Professional Data Engineer).

Typical Work Environment

• Tools Used: SQL IDEs (DBeaver, SSMS), Cloud Consoles, Git, Jira, SSIS.
• Industry: Leasing.

Salary is $130-$140k

Join our team and Be You Be Aptar

Aptar is seeking a Molding Process Technician based in Congers, NY. The primary function of the Molding Process Technician is to operate injection molding equipment in order to successfully meet production demands and quality standards.

As a Molding Process Technician, you will:

• Utilize your mechanical skills to install, remove and adjust Injection Molding machinery and equipment
• Troubleshoot Injection Molding machines, follow process to resolve failures, other problems
• Perform set-up of molds for all mold changes
• Assist in preventative maintenance and repair of molding machines, molds and peripherals (robots)
• Coordinates and sets up machines, robots and other equipment performing necessary tests to ensure company compliance. Trains employees in the correct procedures for operation as needed.
• Perform cleaning and general maintenance tasks
• Maintain a safe work environment following Company’s safety, ISO standards
• Achieve adequate production levels while maintaining the expected product quality
• Ensure molded components meet all product quality criteria including dimensional criteria
• Communicate to supervisor and other technicians and document all technical information and issues
• Participate in reducing the rate of scrap
• Assist in training of employees in proper work methods for safe and efficient performance of job duties.
• Maintain records, files and other documentation pertinent to assignments.

Who we are looking for:

Required Skills:

• 1-3 years of experience working with injection molding equipment including machine adjustment, troubleshooting and mold installation and removal
• Strong mechanical aptitude and mechanical skills.
• Familiarity with automation 6/3 robotics
• General knowledge of plastic materials and processes
• Detail oriented
• Ability to implement and tune all peripherals (6 axis robot, grinder)
• Strong verbal and written communication skills
• Strong Mathematical aptitude
• Ability to read blueprints, use precision measuring/inspection tools
• Effective computer skills, documentation, reporting, file management and web skills
• Ability to work different work shifts
• Continual improvement mindset. Self-Learner, trend of continuous learning
• Ability to work and operate machinery in a Clean Room Environment.
• Physically capable of the required work including but not limited to: Extensive use of manual dexterity, ability to grip, firmly hold, turn and practice strong hand coordination in order to troubleshoot, service and repair industrial equipment and use hand tools to perform the same.
• Ability to regularly stand, walk, and bend during performance of essential job duties. Ability to lift up to 50 pounds.
• Understands and practices safe working procedures. Observes safety rules and policies; brings to managements’ attention any unsafe acts or conditions

Who We are

At Aptar, we leverage insights, design, engineering and science to develop drug and consumer product dosing, dispensing and protection technologies for many of the world’s leading brands. Aptar in turn makes a meaningful difference in the lives, looks, health and homes of millions of patients and consumers around the world. Our innovations nasal drug delivery for emergency medicines, precise fragrance applications, mess-free ketchup dispensing for kids, connected technologies that support patients in adhering to their treatments and much more

With manufacturing facilities across North America, Europe, Asia and South America, and a dedicated team of over 13,000 employees in about 20 countries, Aptar is committed to creating impactful innovations for our customers and their consumers.

Our Culture

At Aptar, our success is driven by the individuals who contribute their unique talents and perspectives every day. We believe that when you bring your authentic self to work, we all thrive.

How We Support Our Employees

• An exciting, inclusive and value based working environment
• Award-winning corporate university offering personal development and training opportunities.
• Competitive base salary and performance-based bonus plan.
• Contribute to the communities where we reside.
• Innovative benefits plan which includes: 401k & Retirement Savings plan, vacation, medical, dental, vision, life, disability, pet insurance, wellness plan, and generous paid maternity/paternity leave.

Compensation and Base Annual Pay

In compliance with pay transparency requirements, the salary range for this role is USD $36.00 to USD $45.00 per hour. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. Aptar also offers a variety of benefits, including health, life, and disability insurance, 401(k) match and employer retirement savings contribution, flexible spending accounts, EAP, education assistance, parental leave, paid time off, company-paid holidays, and more. The specific programs and options available to an employee may vary depending on location, pay class, or other factors.

Aptar is an equal opportunities employer. We believe that a diverse workforce is key to our success. We welcome applications from all members of society irrespective of age, sex, disability, sexual orientation, race, religion or belief.

Stay updated on career opportunities by following us on LinkedIn!

With a passion for life

Join our diverse teams of passionate people and a career that allows you to develop both personally and professionally. At Getinge we exist to make life-saving technology accessible for more people. To make a true difference for our customers - and to save more lives, we need team players, forward thinkers, and game changers.

Are you looking for an inspiring career? You just found it.

Job Overview

The Manager, Collagen Operations serves as the sole site leader for the Mahwah, NJ Collagen facility and carries full responsibility for all site personnel decisions, site performance, and operational escalations. This role ensures the safe, compliant, and efficient operation of the site while driving a strong culture of quality, engagement, and continuous improvement.

This position is accountable for the implementation of operational strategy as defined by the Getinge France (La Ciotat) leadership team. The Manager must ensure that all production activities adhere to U.S. regulatory protocols, including FDA, ISO, GMP, ESD, and Medical Device requirements, while also ensuring that all U.S. people practices (HR, safety, compliance, labor standards) are fully adopted and consistently upheld.

The Manager leads the site in achieving production, safety, quality, and delivery objectives while ensuring strong communication, alignment, and reporting back to the Getinge France entity.

Key Responsibilities

Site Leadership & Escalations

Serve as the highest-ranking leader on-site, responsible for daily operational oversight.

Act as the primary escalation point for all personnel, safety, compliance, and operational matters.

Maintain a proactive presence on the production floor; ensure alignment between site activities and La Ciotat leadership direction.

Lead all site-level communication, engagement efforts, and leadership routines.

Safety, Quality & Compliance

Serve as the site owner for safety, quality, and environmental compliance.

Ensure strict adherence to all U.S. regulatory requirements, including FDA, ISO, GMP, ESD, environmental, and medical device standards.

Ensure all U.S. people practices-including investigations, corrective action processes, documentation, training standards, and HR compliance-are consistently applied.

Guarantee timely and effective management of nonconformances, CAPAs, and deviations; lead site-level reviews and escalations.

Operations Management

Lead the execution of the annual production plan and ensure on-time delivery in alignment with customer needs and La Ciotat directives.

Oversee production scheduling, resource planning, inventory management, and staffing decisions.

Ensure production equipment, cleanroom environments, and facilities are properly maintained and audit-ready.

Manage manufacturing engineering and support functions to drive continuous improvement, cost savings, and process optimization.

Ensure documentation accuracy and compliance, including SOPs, controlled documents, training records, and batch documentation.

People Leadership

Full responsibility for all site personnel management, including hiring, onboarding, development, coaching, performance management, and employee relations.

Drive a culture of engagement, teamwork, and accountability consistent with Getinge values and U.S. people practices.

Set clear objectives, oversee workload planning, conduct performance reviews, and support career development.

Cross-Functional & Global Collaboration

Collaborate closely with the La Ciotat Production Director and France-based teams to ensure alignment on operational execution, reporting, and strategy.

Partner with U.S.-based HR, Quality, EHS, Engineering, and Supply Chain teams to ensure compliance and best practices across all site functions.

Coordinate validation, feasibility builds, technical projects, and operational readiness with sustaining engineering and global partners.

Essential Duties

Organize and manage site production resources to meet daily, weekly, and annual plans.

Anticipate operational needs and align staffing with forecasts.

Define short-term production plans compatible with demand and capacity.

Lead investigations into deviations, failures, or operational issues and implement corrective actions.

Oversee preventive and corrective maintenance and technical shutdowns.

Submit and manage investment requests to support operational goals.

Ensure all personnel comply with safety rules, gowning, cleanroom regulations, and quality protocols.

Maintain readiness for internal and external audits at all times.

Minimum Requirements

High school diploma required; advanced education preferred.

3-5 years of experience as a production manager in medical device or similarly regulated environment.

Experience in cleanroom or controlled environment operations preferred.

Demonstrated ability to lead teams and run a manufacturing site with a high level of autonomy.

Strong computer skills; SAP experience a plus.

Targeted salary range: $138,000- $145,000, depending upon experience and location +15% bonus target

#LI-LG1

About us

With a firm belief that every person and community should have access to the best possible care, Getinge provides hospitals and life science institutions with products and solutions aiming to improve clinical results and optimize workflows. The offering includes products and solutions for intensive care, cardiovascular procedures, operating rooms, sterile reprocessing and life science. Getinge employs over 12,000 people worldwide and the products are sold in more than 135 countries.

Benefits at Getinge:

At Getinge, we offer a comprehensive benefits package, which includes:

• 
  
• Health, Dental, and Vision insurance benefits
  
• 401k plan with company match
  
• Paid Time Off
  
• Wellness initiative & Health Assistance Resources
  
• Life Insurance
  
• Short and Long Term Disability Benefits
  
• Health and Dependent Care Flexible Spending Accounts
  
• Commuter Benefits
  
• Parental and Caregiver Leave
  
• Tuition Reimbursement
  

Getinge is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, pregnancy, genetic information, national origin, disability, protected veteran status or any other characteristic protected by law.Reasonable accommodations are available upon request for candidates taking part in all aspects of the selection process.

Company Overview

For over 40 years, Health Monitor has been a nationally recognized, targeted healthcare marketing platform for the Pharma/OTC industry. Our in-house, award-winning content studio creates bespoke healthcare education that fosters more productive patient-physician dialogues at every point of care—we call it #TheHealthMonitorDifference. We have the largest proprietary physician office network in the industry, with over 250,000 offices and more than 450,000 healthcare professionals engaging with our omnichannel educational products. Health Monitor delivers premium point of care content that empowers patients and HCPs with trusted information to achieve the best health outcomes while driving impactful ROI for brands. Learn and follow us on LinkedIn, X, YouTube and Instagram.

Position Overview:

The VP, Client Services leads Health Monitor Network's Client Services organization and owns client relationships and delivery outcomes post-contract, ensuring campaigns are executed with excellence across teams, partners, and channels.

As a senior client-facing leader, this role represents Health Monitor Network with confidence and credibility, building trust with clients, and collaborating with external vendors and partners. The VP guides complex conversations when priorities, timelines, or expectations shift, acting as the connective tissue between clients and internal disciplines to set expectations, align priorities, and resolve complexity so delivery teams can operate effectively.

The role also leads a growing Client Services practice, focused on developing leaders, strengthening delivery discipline, and scaling a consistent, high-performing service model.

Key Responsibilities:

Client Service Excellence

• Serve as a senior client-facing leader in complex or high-stakes situations, guiding conversations with clients, vendors, and partners to align expectations and maintain delivery momentum
• Lead and develop a team of Client Service Managers, setting clear expectations for execution excellence and client stewardship
• Build a performance culture centered on ownership, responsiveness, and high standards of work
• Own day-to-day and strategic relationships with client creative and media agencies

Client Communication & Experience

• Ensure consistent, high-quality client communication that reinforces confidence, clarity, and professionalism
• Guide teams on effective executive-level communication, expectation-setting, and issue resolution
• Maintain oversight of client experience health, ensuring issues are addressed quickly and transparently
• Be accountable for client satisfaction and relationship health across assigned accounts

Delivery Standards & Operating Model

• Define and enforce service delivery standards across campaign execution, reporting, and client communication
• Establish a consistent operating rhythm that enables predictable delivery and proactive risk management
• Own delivery governance, including escalation paths, decision rights, and cross-functional accountability
• Continuously evaluate and improve delivery practices to reduce friction, rework, and execution risk
• Be accountable for service delivery outcomes across assigned accounts, including timeliness, quality, and client experience
• Be accountable for ensuring the Client Services organization owns campaign requirements, dependencies, and execution clarity across all activated internal teams

Cross-Functional Leadership

• Partner closely with Sales, Editorial, Creative, Print, Digital, Analytics, Ad Ops, and Project Management leadership to align on priorities, dependencies, and execution expectations
• Set clear roles and responsibilities across teams to support efficient, high-quality delivery
• Anticipate delivery risks and lead cross-functional resolution before client impact occurs
• Represent Client Services leadership in internal planning and operational discussions

Qualifications:

Experience & Craft

• 12+ years of experience in strategic account management or client services leadership
• Deep experience supporting digital media campaigns and complex, multi-channel programs
• Strong understanding of creative review and approval workflows
• Proven ability to design, implement, and scale repeatable service delivery models
• Experience leading cross-functional teams including editorial, creative, engineering, analytics, and production

Leadership & Functional Skills

• Demonstrated ability to lead through influence across multiple disciplines
• Strong judgment and comfort making tradeoffs to protect delivery quality and client experience
• Ability to prioritize competing initiatives in a dynamic environment
• Excellent executive communication skills, both written and verbal
• High degree of ownership and accountability; operates effectively with minimal oversight

Nice to Have

• Experience in pharma or healthcare media agencies
• Experience with print media workflows

Education

• Bachelor's degree or equivalent experience

ADA- Physical Demands Office Position

We are committed to providing equal employment opportunities to all employees and applicants, including individuals with disabilities. If you require reasonable accommodation during the application or interview process, please let us know. We will work with you to ensure that your needs are met in accordance with the Americans with Disabilities Act (ADA) and other applicable laws. While performing the duties of this job, the employee is frequently required to sit; use hands to finger, handle, or feel objects, tools, or controls; talk and hear. The employee regularly is required to walk and reach with hands. Employees frequently use computer keyboards, regularly travel both short and long distances via walking within the work site. The employee must regularly lift and/or move a laptop computer. Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and the ability to adjust focus. Employees view computer monitors frequently.

About the Company

At MetroWall, we hold our values close to heart, with respect being the cornerstone of our interactions. We believe that fostering a respectful environment not only enhances collaboration but also drives innovation. Overcoming obstacles is part of our journey, and we view challenges as opportunities to grow and improve. By embracing these challenges, we consistently strive to exceed expectations, delivering exceptional results and setting new standards in our industry. Together, these values create a culture of excellence and continuous improvement. Alignment with these values is critical to the success of any employee at MetroWall.

About the Role

The Manufacturing Engineer acts as the bridge between Engineering and Production, owning all aspects of process definition, manufacturability, and continuous improvement for MetroWall’s glass partition, door, and framing systems.

RELOCATION ASSISTANCE NOT AVAILABLE.

Responsibilities

Process Design & Standardization:

• Develop, document, and maintain manufacturing processes for aluminum and door assembly operations
• Create Standard Operating Procedures (SOPs), setup sheets, visual work instructions, and tool/fixture lists
• Define operation sequences, routing steps, and cycle times in ERP (Epicor/Kinetic)
• Establish and maintain machine capability matrices, ensuring processes align with equipment limitations

Design for Manufacturability (DFM):

• Participate in NPI and R&D project reviews to ensure designs are manufacturable within MetroWall’s equipment and process constraints
• Collaborate with Product Design Engineers to optimize part geometry, tolerances, and hardware selection
• Approve manufacturability sign-offs prior to product release (NPI Phase Gate)

Process Improvement & Cost Reduction:

• Analyze production performance data to identify waste, bottlenecks, and rework causes
• Implement Kaizen and lean initiatives
• Lead trials to validate improved processes, new jigs, or revised toolpaths

Collaboration & Support:

• Work closely with Production Managers to ensure practical implementation of processes
• Support Production Engineers during complex custom projects or prototypes
• Serve as a technical escalation point for production issues

Document & Revision Control:

• Maintain all process documentation under version control (aligned with Engineering ECO system)
• Link controlled documents to Epicor Work Orders and routings
• Audit shop floor adherence to latest revision

Safety & Compliance:

• Ensure compliance with OSHA and internal safety standards
• Integrate safety instructions directly into work procedures

Qualifications:

• Bachelor’s degree in Mechanical, Industrial, or Manufacturing Engineering.
• 3+ years of manufacturing experience (preferably architectural aluminum/glass or similar fabrication).
• Hands-on understanding of CNC machining, cutting, drilling, and assembly operations.
• Familiarity with Epicor/Kinetic, AutoCAD/Inventor, and Lean manufacturing tools.
• Strong documentation and communication skills.
• Ability to work cross-functionally between Engineering and Production.
• Strong organizational abilities to manage multiple tasks and projects simultaneously. Skilled in identifying issues, analyzing options, and implementing effective solutions in a timely manner.
• Keen attention to detail with a commitment to producing high-quality work, ensuring accuracy and precision in all tasks.

Work Environment

• Office & Field

Additional Responsibilities:

• Work with all members of the MetroWall team to deliver a level of customer service that exceeds the expectations of our customers
• Assist sales team personnel in selecting solutions for clients
• Continuously improve existing/new internal processes and deliverables
• Obtain thorough understanding of MetroWall products and their capabilities in order to provide support to other teams/team members

CoWorx Staffing Services has a Direct Hire opportunity for a Supply Chain Manager position in the Northvale area. It is a great opportunity to work with a company that envisions a future of electrification and innovation and strives to create an inspiring workplace where their employees are integral to shaping that future.

Job Summary: We are seeking a Supply Chain Manager to join our clients team in Northvale, NJ. This role will be responsible for managing the complete Supply Chain process including Customer Service, Production Panning, Materials Planning and Ordering, Logistics, and Warehouse function for their automotive products factory.

Main Responsibilities

• Manage a diverse team through coaching, performance management, and development

• Oversee department heads for warehouse, materials, and customer service and support their strategy and execution

• Responsible for on time delivery to customer

• Coordinate the S&OP process

• Manage and execute the demand (customer service) and production plan for a 24/7 production operation

• Drive for zero material shortage and production continuity

• Maintain inventory accuracy and control

• Create a balanced inventory and working capital optimization strategy and execute through team directives

• Handle escalated customer delivery issues

• Implement continuous improvement strategies to eliminate waste and create efficiencies

Qualifications

• Bachelor’s Degree in Supply Chain, Engineering, or Business preferred

• Minimum of seven years of supply chain experience in a manufacturing industry

• Experience of managing a supply chain team

• Extensive demand planning, capacity planning, and production planning experience.

• Experience in stamping or molding operations is a plus

• Comfortable working on-site 100%

• Hands-on style leadership in all supply chain function

About Us

Imagine the innovation and expertise behind the world’s leading cosmetic brands, brought to you by a distinguished Italian company with a legacy of excellence. Since 1972, Intercos Group has been at the forefront of color cosmetics, pencils, nail polish, skincare, and personal care products. We pride ourselves on being the only cosmetics manufacturer that combines top-tier quality and advanced technology with a global reach and a personalized touch.

With 15 commercial offices and 15 production facilities across 12 countries, Intercos Group brings a local approach to a global stage. We continually set the standard for beauty, crafting exceptional product lines for brands worldwide. As one of the largest suppliers in the cosmetics industry, we are a leading force in the research, development, and production of beauty products, shaping the future of the industry with every season.

Position Summary

The Quality Control Manager is responsible for all aspects of Quality measurement, product inspection and in-process testing in West Nyack, NY. The primary responsibility is to ensure that Quality Control personnel perform the required inspection accurately and as specified by the appropriate quality documentation. This position will allocate resources to efficiently maintain orders on schedule.

Essential Functions

• Quality Control – Product Inspection and Release

1. Testing of materials required to produce a finished product and the final product to confirm compliance to issued specifications.
2. QC Inspectors are responsible for (but not limited to)
3. Physical – Dimensions, Hardness, Drop test, tap test, net weight; Visual – Color (e.g. color matching), Appearance; Sensory - Odor, Texture

• Product Disposition

1. Determine final disposition of all products
2. Responsible for approving and rejecting all batches
3. Management of Product Hold and Disposition

• Quality Control Documentation/Samples for Clients

1. Conversion of Product Specifications to Production Line Documentation (checklists, forms)
2. Finished Product Documentation to be issued to Clients, (e.g. COA)
3. Pre-Shipment Samples to Clients

• Management of Documents and Product Samples Retention Requirements

1. Records /Documentation review and sign off for OTC Products

• Monitor and Confirm production operations conforming to specifications or requirements

1. Line Clearance
2. Critical Process Parameter Line Set Up

• Management of Staff
• Manage QC work schedules; accountable for QC team’s work hours
• Responsible for allocating QC personnel to the production line
• Perform staff performance evaluation
• Responsible for the training of the QC personnel, the discipline and morale of the staff.
• Perform other duties and projects as assigned.

Job Qualifications

• Bachelor’s degree in Applied Sciences or Engineering (e.g., Biology, Chemistry, Physics, or a related field).
• At least 5 years of experience in Quality Management, QA, or QC.
• Proven expertise in Quality Management in cosmetic industry
• Familiarity with Quality Systems, including GMP and GLP, in an FDA-regulated industry.
• Strong critical thinking and problem-solving skills, with the ability to identify and resolve issues promptly, analyze information effectively, and develop alternative solutions.
• Excellent interpersonal and communication skills.
• Capable of managing and developing staff.
• Collaborative team player.
• Self-motivated and proactive.

Job Benefits

Health Insurance: Comprehensive medical, dental, and vision coverage

Retirement Plans: 401(k) plan, often with company matching

Life Insurance: Coverage for employees in the event of death or disability

Paid Time Off (PTO): Vacation days, sick leave, and personal days

Holidays: Paid company holidays and floating holidays

Professional Development: Training programs and opportunities for career advancement

Performance Bonuses: Annual merit increase and/or bonus based on individual performance

Company Events: Team-building activities, social events, and company outings

Employee Assistance Programs (EAPs): Confidential counseling and support services for personal and professional issues.

EEO

Intercos Group is committed to creating a diverse and inclusive workplace where everyone is valued and respected. We believe that a wide range of perspectives and experiences enhances our innovation and success. We are an Equal Opportunity Employer and do not discriminate based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or any other legally protected status. All qualified applicants are encouraged to apply and will receive consideration for employment without regard to any of these characteristics. We are dedicated to providing a work environment that is free from discrimination and harassment and promotes equal opportunity for all.

About us:

We’re Five Star Millwork — a fast growing millwork & trim work company based in Pearl River, NY, with a reputation for exceptional craftsmanship and attention to detail. From high-end millwork to custom kitchen installations, we take pride in delivering work that’s built to last. Our sister companies, Master Trimmer and Five Star Kitchen Design Center, work hand-in-hand to bring beautiful residential and commercial spaces to life.

The Role:

We're looking for an Estimator with specific finish carpentry experience who is ready to work in a fast-paced culture. The Finish Carpentry Estimator will be responsible for all aspects of preparing hard bid construction cost estimates. Responsibilities include plan take-offs, estimating, proposal preparation, negotiations, pre-construction coordination, client relations, and bid tracking. If you are a self-motivated Estimator with sound judgement, strong communication/interpersonal skills, and confidently develops accurate construction bids then we would love to hear from you! Ideally, you will possess knowledge in construction means and methods, costs, and engineering principles to hit the ground running.

The Responsibilities:

• Read and interpret project documents, understand project logistics, understand project schedule, and develop scopes of work.
• Perform detailed and accurate quantity takeoffs and obtain material pricing.
• Work with Five Star Millwork LLC management and field operation teams to estimate labor production rates, identify project efficiencies, and identify alternate approaches.
• Attend client pre-bid meetings, visit project sites, take notes, and assess site-specific conditions.
• Submit and follow up pre-bid requests for information.
• Prepare bids itemized by specification section and detailed into labor, material, equipment, subcontractor, and overhead costs.
• Present bids to management, succinctly explaining estimate details and project specifics.
• Prepare accurate and competitive hard bid construction cost estimates and submit formal proposals in a timely manner.
• Maintain detailed and orderly project files, adhering to Five Star Millwork quality standards.
• Follow up on bid results.
• Build relationships with clients, contractors, and vendors.
• Perform pier reviews of estimates and proposals. Troubleshoot and resolve estimate issues.
• Maintain past performance databases and spreadsheets.
• Research data on industry standard labor production rates and material costs.
• Maintain the bid board, bid tracking logs, customer history, and material management.
• Identify and recommend improvements to the bidding process.
• Maintain professional & technical knowledge by attending educational workshops; reviewing professional publications; establishing personal networks; participating in professional societies.

What you bring:

• Bachelor’s degree in Engineering, Architecture, Construction Management, or 10 years’ experience carpentry construction.
• Strong interpersonal and communication skills with the ability to develop and maintain a business relationship with clients and vendors.
• Experience estimating commercial and residential carpentry projects that include finish carpentry, and doors.
• Knowledge of applicable codes and standards.
• Experience with estimating takeoff software.
• Experience estimating construction projects $10,000 to $5,000,000.
• Proficient in Microsoft Windows, Word, Excel, PlanSwift and Quickbooks.
• Superior written and oral communication skills.

Benefits:

• Casual yet professional environment
• Competitive pay
• Paid vacation and holidays
• A yearly review
• Co-workers you enjoy working with

DESCRIPTION

Driven by a commitment to research, quality, and service, PDI provides innovative products, educational resources, training, and support to prevent infection transmission and promote health and wellness. Encompassing three areas, our Healthcare, Sani Professional and Contract manufacturing divisions, we develop, manufacture, and distribute leading edge products for North America and the world. We have several locations across the US and are looking for new Associates to join our team!

POSITION PURPOSE

As the Principal Packaging Engineer, you will serve as the enterprise-wide technical expert and strategic lead in FDA regulated packaging. The position leverage deep knowledge in packaging including but not limited to design, test methods, standards, and industry insights to create and deliver a pipeline of breakthrough innovations and overall organizational improvement.

You will operate with a high degree of autonomy, and lead with accountability projects from concept to commercialization. A proactive approach in identifying opportunity areas and a strong drive for results and overall organizational improvement is essential.

This role requires excellent communication skills to effectively collaborate across functions, influence stakeholders and ensure alignment with organizational goals. The Principal Engineer must take responsibility for technical mentorship and coaching, fostering technical growth and knowledge of junior engineers while strengthening the team’s technical capabilities. As a recognized expert, you will guide internal and external teams on the application of packaging standards (e.g., CCIT, ISO 11607, USP , USP , etc.), and represent the company in regulatory interactions, technical forums, and industry partnerships.

Success requires exceptional problem-solving skills, strategic influence, and proven ability to align cross-functional teams toward breakthrough innovation. This role is accountable for delivering measurable outcomes and ensuring that packaging innovations translate into tangible business impact.

ESSENTIAL FUNCTIONS AND BASIC DUTIES

Technical Leadership, Data Analysis and Interpretation

• Demonstrate strong ownership and leadership on technical strategies and problem solving while driving projects from concept to commercialization.
• Own the technical roadmap for packaging innovation and ensure alignment with business priorities.
• Take responsibility for the accuracy, integrity, and impact of technical data used to inform decisions.
• Design and direct meaningful and robust research projects or experiments both internally and externally through relationships with academic institutions and industry partners.
• Facilitate knowledge sharing and foster collaborative research initiatives while mentoring, coaching and guiding junior engineers.
• Analyze experimental data to draw meaningful conclusions from research and guide further development.
• Ensure robust statistical methods are applied where necessary.
• Develop innovative solutions to address technical challenges.
• Act as subject matter expert in packaging for FDA regulated products (expert in packaging standards such as CCIT, ISO 11607, USP , USP , etc).
• Identify, scope and represent the organization at key conferences, seminars and other professional events.
• Stay current and keep stakeholders updated with emerging technologies, regulatory trends, and scientific advancements in packaging.

Innovation and Strategy

• Exhibit a proactive mindset in identifying, vetting and implementing new opportunities for innovation and improvement of the organization.
• Demonstrate ability to think strategically and influence the organization on key initiatives.
• Champion initiatives that deliver quantifiable improvements in product performance, cost efficiency, or regulatory compliance.
• Lead cross-functional teams to bring strategic innovations from concept to launch, ensuring accountability at each stage.
• Develop and execute innovation strategies aligned with business goals, including new technologies, methods, and IP creation.
• Lead the development of new products, technologies, and methods that deliver measurable impact and enhance organizational success.
• Assess and take necessary actions to acquire new in-house technologies to improve PDI’s capabilities.

Project Scoping and Ownership

• Define, communicate and align project goals and request necessary resources for execution cross functionally.
• Hold self and cross-functional teams accountable for meeting project milestones, quality standards, and business objectives.
• Ensure post-launch evaluation and continuous improvement based on performance metrics.
• Demonstrate strong interpersonal and influencing skills to drive initiatives forward and overcome challenges.
• Ensure accountability to milestones and objectives while demonstrating strong ownership, coordination and leadership in project execution, anticipating risks, and implementing mitigation strategies to ensure timely and high-quality delivery.
• Demonstrate excellent communication skills in preparing and presenting progress updates, status, reports and findings to senior level management.

PERFORMANCE MEASUREMENT

• Packaging Leadership and Effectiveness: leads packaging design development that meets intended performance, safety and regulatory requirements
• Project Acceleration and Execution: Demonstrates initiative in shaping project direction, anticipating potential obstacles and proposing solutions to ensure timelines are met or accelerated. Consistently delivers technical work on time, in scope and aligned to evolving business priorities
• Strategic Technical Problem Solving: Anticipates and identifies complex packaging development challenges early, leveraging expertise and leadership to drive resolution paths with minimal rework and high technical rigor.
• Cross-Functional Influence and Alignment: Actively engages and influences cross-functional partners (Regulatory, Marketing, Operations, Quality) to ensure clarity of technical direction, ensure alignment and provide technical strategies, expertise and data to remove barriers impeding project progress
• Pipeline Advancement and Opportunity Identification: Proactively scans internal and external landscapes to identify new opportunities, unmet needs and technology enablers that can strengthen the pipeline and move concepts into development
• Performance will be evaluated based on the ability to deliver projects on time, within scope, and with measurable business impact.
• Expected to take full ownership of assigned initiatives and proactively resolve barriers to success.

QUALIFICATIONS

EDUCATION/CERTIFICATION

• Bachelor’s degree in Packaging, Mechanical Engineering, or related scientific discipline required. Advanced degree preferred.

REQUIRED KNOWLEDGE

• New Product development and leadership in a regulated environment.
• Packaging development for FDA regulated products.

EXPERIENCE REQUIRED

• 8+ years of relevant experience in product development and R&D support, with a demonstrated track record of scientific and packaging development responsibilities.

SKILLS/ABILITIES

• Strong analytical thinking capabilities and mindset
• Strong sense of accountability and commitment to delivering results with excellence and timeliness
• Excellent communication and interpersonal skills
• Ability to make sense of, organize and present complex information
• Proven ability to work independently and take initiative in ambiguous or evolving environments
• Ability to set specific goals for self and others and organize/align the resources to help achieve goals
• Demonstrated ability to manage multiple projects with varying complexity
• Ability to evolve, learn and implement new systems and programs
• Initiative taker, ambitious and driven
• Resourceful and able to find creative and innovative ways to achieve results
• Demonstrated accountability for project outcomes and ability to drive initiatives to successful completion.
• Proactive leader who takes full ownership of challenges and drives results with urgency and precision.

WORKING CONDITIONS

• Mix of lab, manufacturing and office environment

SALARY RANGE:

• $128,000 - $141,000 annually

BENEFITS

PDI is pleased to offer comprehensive and affordable benefits for our associates, which includes:

• Medical, behavioral & prescription drug coverage
• Health Savings Account (HSA)
• Dental
• Vision
• 401(k) savings plan with company match and profit sharing
• Basic and supplemental Life and AD&D insurance
• Flexible Spending Accounts (FSAs)
• Short & long-term disability
• Employee Assistance Program (EAP)
• Health Advocacy Program

PDI also offers many voluntary benefits such as: Legal services, critical illness, hospital indemnity, accident coverage, ID theft and fraud protection, pet insurance and employee discounts.

At PDI, we are also committed to helping our associates maintain a healthy and sustainable work/life balance and are proud to provide associates with paid time off programs including: sick & safe leave, vacation, company & floating holidays, paid parental leave, and depending on the position we also offer summer hours and flex place/flex time options.

Lead complex construction projects from concept to completion, ensuring timelines, budgets, and quality standards are met. Collaborate with cross-functional teams and contractors to drive results and deliver exceptional builds. If you're a proactive leader with a passion for construction excellence, we want to hear from you.

Company Benefits:

• 13 paid holidays
• Vacation and sick pay
• PPE provided along with annual allowance for boots and prescription safety glasses
• Work shirts provided by company
• Annual appreciation package
• Early performance evaluation opportunities
• Competitive benefits (medical/dental/vision)
• 401k + match
• Company paid life insurance and disability
• Employee assistance program
• Career development opportunities

Responsibilities:

• Planning, organizing, directing, controlling, and evaluating construction projects (HVAC/Refrigeration & Mechanical projects) from start to finish according to schedule, specifications, and budget.
• Preparing and submitting construction project budget estimates, critical path schedules, and quality control programs.
• Planning and preparing construction schedules and milestones, and monitoring progress against established schedules.
• Preparing contracts and negotiating revisions, changes, and additions to contractual agreements with architects, consultants, clients, suppliers, and subcontractors.
• Planning, coordinating, and managing effectively all Foremen, material, and equipment to meet the established budget, schedule, and scope of the projects.
• Preparing progress reports and issuing reports to clients as necessary.

Qualifications:

• Must be able to develop and maintain detailed MS Project schedules (startup-task durations, resource allocations, labor costs, etc.).
• Must be able to maintain multiple complex projects in all varying phases of construction at the same time.
• 2-5 years in industrial piping or Ammonia Refrigeration as a Project Manager.
• Successfully completed multiple large-scale industrial Piping and Ammonia Refrigeration projects for reputable contractors.
• Coaching, mentoring, and teaching project teams.
• Advanced financial management and forecasting experience.
• Excellent oral and written communication skills; must be detail-oriented, self-sufficient, and self-motivated.
• Exceptional planning and organizing skills with the ability to manage a number of projects

Company Profile:

CIMCO specializes in the engineering, design, manufacture, installation and service of complex thermal building solutions for industrial, process cooling and recreational refrigeration and mechanical systems. For more than 100 years, CIMCO's leadership and unparalleled research, development and manufacturing programs has put us at the forefront of industry advancements and technological breakthroughs. Our professional engineers, technicians and designers apply innovative state-of-the-art equipment and refrigerants to develop systems that meet even the most complex thermal challenges.

CIMCO is committed to creating an inclusive environment where people from all backgrounds can thrive. Together, we embrace diversity of thought, experience, and perspective, as we combine our unique skills and capabilities to drive successful outcomes for all stakeholders. As an equal opportunity employer, CIMCO provides accessibility accommodations during the recruitment process. Should you require any accommodation, please let us know and we will work with you to meet your needs.