Engineering Jobs in Spencerport, NY

Senior Manager, Operations

Location: Rochester, NY (Onsite)

Industry: Regulated manufacturing (medical device / life sciences)

Travel: Limited, as needed

Reports to: Director of Manufacturing / Site Operations Leader

Compensation: 170K salary range + 20% bonus + benefits (commensurate with experience)

The Opportunity

A well-established manufacturer operating in a highly regulated environment is seeking a Senior Manager, Operations for the Rochester, NY facility.

This is a high-visibility, senior leadership role with responsibility for a 24x7 multi-shift operation, focused on operational excellence, safety and environmental improvements, equipment performance optimization, and team development. The role plays a critical part in driving performance, reducing operational risk, and strengthening manufacturing systems and culture.

The ideal candidate is a hands-on operations leader and change agent with experience in high-volume manufacturing, strong people leadership capabilities, and a proven ability to improve OEE, quality, and engagement in regulated environments.

Why This Role Is Unique

• Ownership of a mission-critical, 24x7 manufacturing operation.
• Opportunity to strengthen and evolve tiered operating mechanisms and standard work.
• Strong mandate to improve EHS, equipment effectiveness, and process capability.
• High degree of influence across Manufacturing, Quality, R&D, Supply Chain, Finance, and Facilities.
• Blend of strategic leadership and hands-on operational execution.

Key Responsibilities

Operational Leadership

• Lead daily operations to meet production, quality, cost, and safety objectives.
• Set operational goals, KPIs, and development paths for supervisors.
• Deploy, monitor, and sustain standard work across the operation.
• Lead a multi-shift supervisor team supporting a 24x7 manufacturing schedule

Process & Performance Optimization

• Drive continuous improvement initiatives to improve OEE, reduce downtime and waste, and optimize changeovers.
• Assess and improve operational practices to reduce errors and improve process capability.
• Apply formal problem-solving tools while addressing real-world equipment and process challenges.
• Make risk-based decisions to optimize equipment performance while maintaining product quality and employee safety.

Quality & Regulatory Compliance

• Proactively improve quality performance, reduce nonconformances, and drive CAPA implementation.
• Ensure compliance with cGMP, FDA, OSHA, ISO, and internal quality systems.
• Oversee manufacturing documentation, investigations, SOPs, batch records, and NCMRs.

Cross-Functional Collaboration

• Partner with R&D, Quality, Engineering, and Supply Chain on new product introductions, validations, and troubleshooting.
• Communicate capacity constraints, technical risks, and performance trends to Planning and Finance.
• Collaborate with Facilities on short- and long-term equipment and layout planning.

People & Culture

• Lead, mentor, and develop supervisors and operators.
• Foster a culture of accountability, safety, continuous improvement, and performance.
• Support individual development plans and career progression for salaried and hourly employees.

Must-Have Qualifications

• Bachelor’s degree in a scientific or engineering discipline (preferred).
• 8+ years of manufacturing operations experience.
• 3+ years in a leadership or people management role.
• Experience leading high-volume, equipment-intensive manufacturing operations.
• Strong knowledge of GMP and regulated manufacturing environments.
• Experience with manufacturing documentation, investigations, and quality systems.
• Proven ability to drive operational improvements tied to OEE, scrap, waste, and productivity.
• Experience with Lean Manufacturing, Six Sigma, or similar methodologies.

Nice-to-Have / Preferred

• Experience in medical device, pharmaceutical, or similarly regulated industries.
• Lean Six Sigma certification (Green Belt or higher).
• Experience strengthening tiered accountability systems and standard work.

Precision Talent Partners, LLC values diversity and is proud to be an Equal Opportunity Employer. We are committed to creating an inclusive workplace where all employees feel respected, supported, and empowered to contribute. This description reflects management’s assignment of essential functions and does not restrict the tasks that may be assigned. Employment is at-will, and this job description does not constitute a contract of employment.

GENERAL RESPONSIBILITIES:

The Senior Quality Engineer is responsible for overall product quality and compliance with ISO 9001 standards. This role will be responsible for developing and maintaining the Quality Management System and leading quality assurance activities throughout the product lifecycle

SPECIFIC RESPONSIBILITIES:

• Develop, implement and maintain the Quality Management System (QMS) in accordance with ISO 9001 standards.
• Ensure continuous improvement of the QMS through regular audits, reviews, and updates.
• Lead quality assurance activities throughout the product lifecycle, from design to manufacturing and post-production.
• Establish and monitor quality metrics and KPIs to assess product quality and performance.
• Identify areas for improvement in manufacturing processes and lead continuous improvement initiatives.
• Implement corrective actions (CAPA) based on root cause analysis.
• Prepare and maintain quality documentation, including inspection plans, work instructions, and standard operating procedures (SOPs).
• Collaborate with engineering, manufacturing, and supply chain personnel to implement product changes for current and next generation products. Maintain documents at various product stages ranging from the creation of part numbers to the release of products for manufacturing.
• Ensure compliance with applicable regulations, industry standards, and customer requirements.
• Review and maintain product manuals and labeling in coordination with Engineering, Sales, and Safety Agencies.
• Conduct training sessions for manufacturing personnel on quality standards, processes, and best practices.
• Act as the customer interface on quality-related issues, providing timely resolutions and maintaining strong relationships.
• Gather customer feedback to drive product improvement and quality improvements.

QUALIFICATIONS:

• Bachelor's degree in Electrical Engineering, Industrial Engineering, Quality Engineering, Manufacturing Engineering, or a related field.
• At least 5+ years of experience in quality engineering or a similar role in a manufacturing environment.
• Certification as an ISO 9001 Lead Auditor or similar quality management certification is preferred.
• Strong knowledge of general manufacturing, quality control, and lean principles.
• Skilled in MS Word and Excel.
• Experience with SAP preferred.
• Must be detail oriented and organized in reviewing information, identifying issues, evaluating options and proposing solutions.
• Clear and organized written and verbal communication.

Inside Sales Representative - Safety and fall protection equipment (B2B only)

Location: Rochester, NY

Client is a global manufacturer of custom fabricated safety equipment such as fall protection anchor points, rails, guards, etc.

Position is B2B and begins as inside sales supporting the national sales manager, with career development into major/key account management.

Customer base:

• Commercial/industrial construction
• Industrial/manufacturing operations
• Construction or rebuilding utiliites/power generation

Example backgrounds: Fasteners, ties, concrete/forms, trusses, commercial roofing, rigging/cranes, fall protection and safety products, commercial buildings and building materials, commercial HVAC, electrical or lighting, etc.

KEY THINGS (must have or won't be considered)

• Experience to include 2+ years of B2B sales of products - ideally engineered - into industries noted above
• Understanding of some aspects of commercial/industrial construction/remodel
• Experience

Responsibilities:

• Provide inside sales and customer support in partnership with the U.S. Sales Manager, including handling leads, quotes, and follow‑up.
• Develop relationships with local customers, building a pipeline of work with new and existing customers
• Develop a relationship with larger/key accounts in the U.S., acting as account manager full cycle account manager (this is still primarily inside; some individual visits possible)
• Work with customers to ensure best value for them and for company using company's custom engineering and fabrication capabilities.
• Learn product and service offerings and grow to be a resource relying on a sonsultative sales approach with the larger/key accounts.
• Tracking entire process with company CRM/ERP system .
• Work both company‑provided qualified leads and self‑generated leads; actively pursue both.

Requirements:

• Some B2B sales experience selling into "items", ideally needing some technical expertise, construction, cranes/rigging, tools, safety/fall protection, manufacturing or the like.
• Strong safety mindset – you will represent safety products!
• Some experience with consultative selling, not strictly “off the shelf” or bulk transactions.
• Excellent communication skills - on sites, with customers, in presentations, etc
• Must be able to work legally in the U.S. without any visa requirements now or in the future

.

Base is $60k - $70k; on target earnings $90k - $105k (Depending on your experience)

Job Title: Project Manager

Location: 800 Lee Rd, Rochester NY 14623 (100% on site)

Duration: 3+ Months Contract to Hire

Hours: M-F, 8a-5p

Job Responsibilities

• Provides construction management, architectural design, and code compliance support in the Facilities Management group.
• Coordinates work of contractors and interfaces with customers to accommodate program requirements.
• Typical projects include building renovations, capital infrastructure improvements, equipment installations, and associated site work to support the relocation or expansion of personnel and assets in support of changing business needs.
• Responsibilities cover all phases of project management including evaluation of requirements, estimating, scheduling, budget management, design oversight, construction management, and project closeout.
• Role is customer focused, metric driven, and has an expectation of value engineering, process efficiencies, and cost improvements.
• Utilizes business operating systems to deliver continuous improvement and operational excellence to all aspects of the department.
• Manages several projects at one time, having sole responsibility for large to small projects and supporting additional projects as a team member, engineering, or construction management resource.
• Works in a diverse and changing environment supporting many internal and external customers simultaneously.
• Works closely with Facilities Maintenance and Operations teams.
• Supports the development of capital and expense budgets for the corporation.
• Ability to obtain a U.S. security clearance.
• May require up to 30% travel as needed.

Responsibilities

• Develops, tracks and manages project budget, project plans, timelines and scope
• Manage project resources including procuring project staff, developing, motivating, coaching and advising
• Partner closely with other members of functional†project†teams to define business requirements
• Lead teams of developers in the delivery of high-quality software solutions that meet business needs
• Define test plans and ensure that products are defect free before User Acceptance Testing
• Facilitate the User Acceptance Testing process, developing rollout plans and procedures
• Prepare and present cost-benefit analyses
• Ensure appropriate systems development and project management processes are being utilized
• Make presentations to steering committees or project sponsors

Qualifications

• Bachelor's degree in a technical field such as computer science, computer engineering or related field required
• 5-7 years experience
• Proven project management experience
• People management and team building skills
• Demonstrated ability to be flexible/ adaptable in exercising judgment in a changing environment and to manage competing priorities
• Proven ability to learn business processes quickly and to work well with business partners at different levels within the organization
• Strong ability to assess risk and apply management principles to technology applications/products and business functions
• Experience delivering technology and business application solutions in a large-scale, multi-platform systems environment

Project Manager

Rochester, NY

JK Executive Strategies is proud to partner with a growing electrical contracting firm serving both public and private sector clients across New York State. Known for its family-oriented values, long-standing customer relationships, and commitment to doing the job right, this company is poised for continued growth.

We are searching for a Project Manager to oversee transportation and roadway infrastructure projects throughout Western and Central New York. This role is responsible for managing projects from pre-construction through completion, ensuring work is delivered safely, on schedule, and within budget.

Projects typically involve roadway and transportation infrastructure such as traffic signal systems, highway lighting, fiber optic networks, and intelligent transportation systems supporting public roadways and municipal infrastructure.

Responsibilities

• Manage infrastructure projects from pre-construction through closeout
• Coordinate with field supervisors/foreman, crews, subcontractors, and vendors to ensure project milestones are achieved
• Attend pre-construction meetings and ongoing project coordination meetings
• Develop and manage project schedules, budgets, and resource planning
• Oversee procurement of materials, equipment, and subcontracted services
• Monitor project costs and progress to maintain schedule and profitability
• Prepare and manage change orders, project documentation, and billing
• Maintain clear communication with clients, inspectors, and internal teams
• Support estimating and bidding efforts for upcoming projects when needed
• Ensure compliance with safety standards and regulatory requirements

Requirements

• At least 2 years of project management experience in construction, electrical contracting, or related fields
• Direct experience with NYS DOT projects is highly preferred
• Bachelor’s degree in Construction Management, Engineering, or a related field preferred
• Relevant industry experience with traffic signal installation, highway lighting, and/or underground utilities will also be considered in lieu of a degree
• Strong project planning and organizational skills
• Excellent communication and coordination abilities
• Ability to manage multiple projects simultaneously
• Strong problem-solving skills and attention to detail
• Proficiency with project management software and standard office tools
• Experience with public infrastructure or transportation projects preferred

Salary Range

• $80k-$90k + 100% paid medical coverage for individuals and families

JK Executive Strategies is an Equal Opportunity Employer. It is the policy of JK Executive Strategies to provide equal opportunity in employment and conditions of employment to all individuals regardless of age, race, color, religious beliefs, national origin, sexual orientation, gender identity, sex, veteran or military status, disability, pregnancy-related condition, predisposing genetic characteristics, genetic information, marital status, familial status, prior arrest, domestic violence victim status, non-job related convictions, participation in lawful activities outside of our workplace, or any other status protected by law.

At American Packaging Corporation (APC), you'll find the packaging career you've been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC's longstanding success is fueled from the inside out. We're constantly seeking to improve our internal operations and were named a "Best of the Best" in the Best workplaces in the America's awards for 12 years in a row. It's how and why we engage the best and brightest talent to continue propelling our shared success into the future.

LOCATION: Rochester, NY

SUMMARY: Provide engineering duties as assigned by Plant Engineer and/or Plant Manager. Responsible for overseeing new equipment installations as well as modifications to existing equipment as assigned by Plant Engineer. Maintain PLC, HMI, and Drive programming software. Provide detail drawings of parts that need to be manufactured in our shop or by an outside machine shop. Oversee plant engineering duties in the Plant Engineer's absence. Troubleshoot and repair equipment problems that effect productivity of the manufacturing group. Be involved with process improvements providing input in production problem solving.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following:

• Providing detail drawings.
• Active in troubleshooting electrical, electronic, and mechanical problems in a manufacturing environment.
• Well versed in PLC and HMI programming.
• Well versed in digital and analog AC/DC drive design, programming and installation.
• Well versed in computer (PC) fundamentals, including communication protocols, Microsoft Operating systems and Microsoft Office software.
• Manage new equipment installations and startups.
• Design, install and startup equipment modifications.
• Negotiate price and purchase equipment and services as needed.
• Draft capital expenditure requisitions - gather information for justification of capital, obtain cost of capital items.
• Fill out project item listings.
• Provide managerial input to the maintenance department as well as outside contractors.
• A fundamental understanding of regulations including OSHA, NFPA, NEC, EPA, and WDNR.
• Responsible for working safely and being a safety leader.
• Other duties as assigned.

SUPERVISORY RESPONSIBILITIES

Directly supervises employees in the Maintenance Department in the absence of the Maintenance Manager. Carries out supervisory responsibilities as necessary in accordance with the organization's policies and applicable laws. Responsibilities include training employees; planning, assigning, and directing work; appraising performance; rewarding and disciplining employees; addressing complaints and resolving problems.

QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

EDUCATION and EXPERIENCE: A bachelor's degree, Associate's degree, or equivalent in a related field is required. An additional year of relevant full-time experience and/or training is preferred.

LANGUAGE SKILLS: Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.

MATHEMATICAL SKILLS: Ability to work with mathematical concepts such as Ohm's Law, probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.

REASONING ABILITY: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.

PHYSICAL DEMANDS: While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel. The employee frequently is required to sit and talk or hear. The employee is occasionally required to stand; walk; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; and hear, taste or smell. This position may require manual lifting not to exceed 50 lbs - reference your department-specific JHA (job hazard analysis) for departmental lifting restrictions.

WORK ENVIRONMENT: While performing the duties of this job, the employee is occasionally exposed to wet and/or humid conditions; moving mechanical parts; high, precarious places; fumes or airborne particles; toxic or caustic chemicals; outside weather conditions; extreme cold; extreme heat; risk of electrical shock; risk of radiation; and vibration.

The noise level in the work environment is usually moderate.

American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran.

If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at:

.

Insero Talent Solutions is recruiting a Continuous Improvement Manager for a fast growing manufacturing company in Rochester, NY.

Position Summary

Reporting to the Plant Manager, the Continuous Improvement Manager leads process optimization initiatives across all departments to enhance efficiency, productivity, and quality. This role drives Lean, Six Sigma, and Kaizen methodologies to identify opportunities for waste reduction, standardization, and performance improvement. The individual will collaborate with cross-functional teams to implement sustainable process changes that deliver measurable results in safety, quality, delivery, and cost.

Key Responsibilities

• Lead and facilitate continuous improvement projects to enhance operational efficiency and product quality.
• Analyze data to identify performance gaps and develop strategies to address root causes.
• Implement Lean and Six Sigma tools to streamline workflows and eliminate waste.
• Partner with department leaders to develop and execute improvement action plans.
• Standardize processes and establish best practices across manufacturing and administrative functions.
• Monitor KPIs and use visual management tools to track progress and communicate results.
• Support training and development programs that promote a culture of continuous improvement.
• Collaborate with Quality, Engineering, Supply Chain, and HR teams to integrate improvement initiatives across all business functions.
• Prepare reports, presentations, and data-driven insights for leadership review.
• Ensure all improvement activities align with company objectives, safety standards, and regulatory requirements.

Qualifications

• Bachelor’s degree in Engineering, Business, or a related field (Master’s preferred).
• Minimum 5 years of experience in manufacturing or operations with a focus on continuous improvement.
• Lean Six Sigma Green Belt certification required; Black Belt preferred.
• Proven track record in process optimization, cost reduction, and performance improvement initiatives.
• Strong analytical, project management, and problem-solving skills.
• Excellent communication and leadership abilities with a collaborative mindset.
• Proficiency in Microsoft Office, ERP systems, and data analysis tools.

Core Competencies

• Strategic and analytical thinking
• Strong facilitation and coaching skills
• Data-driven decision making
• Excellent organizational and interpersonal communication
• Adaptability and results orientation

At American Packaging Corporation (APC), you'll find the packaging career you've been looking for. With competitive salaries, excellent benefits, 401(k) plans, and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC's longstanding success is fueled from the inside out. We're constantly seeking to improve our internal operations and were named a "Best of the Best" in the Best workplaces in the America's awards for 12 years in a row. It's how and why we engage the best and brightest talent to continue propelling our shared success into the future.

LOCATION: Rochester, NY

SUMMARY: THIS POSITION WILL PRIMARILY FOCUS ON THE VALIDATION TASKS OF THE JOB DESCRIPTION

Apply project management and technical expertise to successfully deliver Validation program goals and outcomes while interacting with customers and meeting their expectations.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

Validation

• Manage the scope, schedule, and reporting of Validation program activities for individual products and/or customers; ensure status, risks, and open issues are tracked and that all stakeholders (Management, internal/external clients, Business Managers/Project Managers, and regulatory agencies) are informed in a timely manner.
• Write and execute IQ/OQ/PQ validation protocols, and manage the associated deviation process.
• Management and leadership of the change control, calibration, and gage R&R processes.
• Provide hands-on support to manufacturing areas as required to assist with problem-solving and long-term changes that lead to product/process improvements related to process failures. Collect and analyze data to make data-driven recommendations/decisions.
• Participate in process failure investigations.
• Maintain up-to-date knowledge of validation requirements, practices, and procedures, and instruct other site members participating in validation studies.
• Support risk analysis activities, including design and process FMEA.
• Facilitate team meetings as needed on in-depth process and product analysis, risk assessments, decision-making, and other evaluations related to the Validation program.
• Assist in internal and 3rd party audits.
• Provide backup for Quality Supervisors and Quality technicians.
• Drive continuous improvement opportunities utilizing lean six sigma and the seven basic quality tools, to benefit the success of APC, including profit improvement plans, long and short-term strategic objectives, helping establish problem-solving teams and methods, and recommending capital projects that improve Safety, Productivity, and Quality.
• Write and improve manuals, standards, and procedures as needed.
• Use of statistical software and techniques for analysis of data, including Process Capability (Cpk, Ppk), Statistical Process Control (SPC), and Design of Experiments (DOE)
• Other duties as assigned.

QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below represent the knowledge, skills, and/or abilities required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

EDUCATION and/or EXPERIENCE

Bachelor's degree in science, mathematics, or engineering from a four-year college or university, and two years related experience and/or training; or equivalent combination of education and experience. ASQ certification is preferred.

LANGUAGE SKILLS

Ability to read, analyze, and interpret common scientific and technical journals, financial reports, and legal documents. Ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community. Ability to write speeches and articles for publication that conform to prescribed style and format. Ability to effectively present information to top management, public groups, and/or boards of directors.

MATHEMATICAL SKILLS

Ability to apply advanced mathematical concepts. Ability to utilize descriptive statistics (average, variation, standard deviation) to analyze data and support process control and capability analysis. Ability to create and interpret control charts, histograms, Pareto charts, and scatter diagrams. Ability to develop statistically appropriate sampling plans. Ability to use and learn statistical analysis software.

REASONING ABILITY

Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret a wide variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.

PHYSICAL DEMANDS

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel, and talk or hear. The employee is frequently required to sit and reach with hands and arms. The employee is occasionally required to stand, walk, climb, or balance, and to stoop, kneel, crouch, or crawl. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. This position may require manual lifting not to exceed 50 lbs - reference your department-specific JHA (job hazard analysis) for departmental lifting restrictions.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran.

If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at .

American Packaging Corporation (APC) is one of the top flexible packaging converters serving customers throughout North America. We are always seeking to improve our operations, deliver more innovation and value, and give back to our local communities. Our longstanding success as custom flexible packaging suppliers has been fueled by our commitment to providing more innovation, more quality, and more responsive customer service, along with our strategic investments in the latest technology.

LOCATION: Chili, NY & Rochester, NY

SUMMARY: Responsible for overall statistical process control software setup by safely performing all testing procedures and ensuring conformance to established specifications. Additionally, manage shift quality improvement initiatives through training, awareness, and analysis of facts and data.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.

• Participate in training, embrace concepts of and actively practice the STOP Safety Program fundamentals to aid American Packaging Corporation's efforts to achieve a zero accident rate.
• Implementation of SPC Software Package.
• Analyze trends in production/process data through statistical evaluation methods.
• Determines test objectives and standards by studying software requirements; writing test cycle plans, test cases, and test scripts.
• Meets test objectives by determining testing methods, cycles, phases, and conditions; setting up testing environment and equipment.
• Identifies software capability and reliability by conducting functional, system, and performance tests and resolves testing problems.
• Completes tests by training and directing others that will use the system.
• Maintains testing database by developing defect tracking and regression testing information requirements; designing information system; enters test outcomes; secures data.
• Reports test outcomes by collecting, analyzing, interpreting, summarizing, and displaying data; recommending software changes.
• Maintains test environment by developing test environment; enforcing and complying with procedures, rules, and regulations.
• Assist Quality Assurance Manager in determining Process Capabilities within the Laboratory and out on the Production Floor.
• Assist with raw material and/or quality issues; i.e., completion of and facilitation of reject/hold forms, supplier certification, customer complaint investigations, etc.
• Maintain Manufacturing Specifications and Operating Specifications.
• Analyze and Recommend Optimal QA Testing Requirement.
• Support Process/Product Trials through active involvement with Suppliers/Vendors, Customers, Manufacturing and Technical.
• Maintain a safe and organized laboratory area.
• Review and accurately file all production test data.
• Maintain and update Raw Material Specification files.
• Review, verify and file all Supplier Certifications.
• Prepare, verify and submit requested COA's for customers.
• Attend and participate in all scheduled meetings (Continuous Quality Improvement, safety, special projects, departmental, etc.).
• Strictly adhere to all company uniform guidelines.
• Any other duties as assigned.

QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

• EDUCATION and/or EXPERIENCE: Bachelor's degree (B.A.) from a four year college or university, preferably in Statistics, with interest in aspects of Math, Computer Science and Engineering. In addition, candidates with experience in Test Driven Development (TDD), strong knowledge and understanding of test methodologies, demonstrated technical ability to understand test code and familiarity with quality assurance processes/procedures is preferred. Also, experience preferred with SQL, Microsoft Office Suite and SPC software programs such as Zontec, WinSPC, STAT Graphics, etc. Ability to work in a fast paced, rapidly changing environment with minimum supervision.
• LANGUAGE SKILLS: The ability to read, analyze and interpret general business periodicals, professional journals, technical procedures, SOPs and governmental regulations. Ability to write reports, business correspondence and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers and the general public.
• MATHEMATICAL SKILLS: Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals. Ability to compute rate, ratio and percent and to draw and interpret bar graphs. Ability to apply concepts of basic algebra and statistical process control. Ability to measure accurately using a graduated ruler.
• REASONING ABILITY: Ability to define problems, collect data, establish facts and draw valid conclusions. Ability to interpret extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.

PHYSICAL DEMANDS:

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is frequently required to stand and use hands to finger, handle or feel objects, tools or controls. The employee is occasionally required to sit, reach with hands and arms, walk, stoop, kneel, crouch or crawl and climb or balance. The employee is regularly required to hear.

This position may require manual lifting not to exceed 50 lbs - reference your department-specific JHA (job hazard analysis) for departmental lifting restrictions. Specific vision abilities required by this job include close vision, distance vision, ability to adjust focus, depth, and color vision. Employee must also be able to taste/smell.

WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Exposure to wet/humid conditions due to manufacturing plant not being air conditioned.

• The noise level in the work environment is usually moderate.

American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position please contact our Human Resources department at .

Chase and Associates is partnering with an established, family-owned packaging leader as they expand into sustainable manufacturing. We are seeking a Plant Manager to lead operations at their facility.

What You’ll Do:

• Direct all manufacturing operations including Safety, Production, Quality, Shipping, and Maintenance/Engineering.
• Lead safety culture by actively participating in committees and ensuring compliance with GMPs and food-safe practices.
• Collaborate with department managers to assess manufacturing issues, review backlogs, and adjust production focus.
• Troubleshoot daily operational problems using mechanical aptitude and assist teams in finding solutions related to operator, method, or machine.
• Analyze production and quality reports to identify issues, develop improvement plans, and implement capital projects.
• Manage departmental spending, develop efficient use of materials and employees, and monitor budgets.
• Supervise Department Managers and Engineers, conduct performance evaluations, and handle employee relations.

What You Need:

• MUST HAVE: Plant Management experience in manufacturing (packaging, food, or industrial goods preferred).
• Strong leadership skills with experience managing supervisors and frontline teams.
• Solid mechanical/electrical knowledge of high-speed manufacturing equipment.
• Excellent communication skills and ability to align division goals with corporate strategy.
• Experience with capital projects, continuous improvement, and operational reporting.