Engineering Jobs in Solana Beach

• 
  
• You will perform reviews of documents associated with completed work and trade processes.
  
• You will keep shop personnel apprised of new technologies, procedures, and tooling improvements associated, approved, and adopted for welding work.
  
• You will provide process improvements and work with engineering to reduce cost and improve the overall efficiency of the welding and non-destructive test program.
  
• You will inspect completed and in process work for quality of workmanship and adherence to requirements, specifications, standards, plans and schedules.
  
• You will train and mentor less skilled employees, demonstrate proper work methods, and discuss viable alternatives and considerations.
  
• You will serve as an Expert Welder leading a group to ensure work assignments are completed.
  

• 
  
• Must be a US Citizen.
  
• Must be determined suitable for federal employment.
  
• Must participate in the direct deposit pay program.
  
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit
  
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
  
• Males born after 12-31-59 must be registered for Selective Service.
  
• This is a bargaining unit position.
  
• You will be required to successfully complete a pre-appointment physical examination.
  
• This position requires the ability to lift and carry items weighing 50 pounds.
  
• Successful completion of a pre-employment drug test (including marijuana) is required. A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You will be subject to random testing.
  
• You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
  
• You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.
  
• Work is performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You will be required to participate in medical surveillance programs.
  
• This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
  
• This position requires the ability to climb vertical ladders when working aboard ships and submarines, and occasional work from ladders, platforms and staging areas.
  
• This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.
  
• This position requires rotating shift work.
  
• Must hold two common welding qualifications in either SMAW, GTAW, GMAW, Flame Spray, Sub Arc, Hull Cuts, Robotic, etc.
  
• Must maintain visual inspection qualifications per VT-271.
  

OUR CORE PILLARS: Safety | Operational Excellence | Shareholder Value

Propulsion Controls Engineering has a job openings for Outside Machinist Journeyman, with a minimum 5 years of marine and/or shipyard experience preferred; at our San Diego, CA location. PCE is a full service electro-mechanical repair and diesel repair contractor. PCE has garnered a wealth of extensive experience in successfully executing major system overhauls across numerous ports throughout the world on virtually every class of ship currently in operation.
Job Summary / Outside Machinist:

Capable of accomplishing the installation, maintenance, and repair of ship's propulsion and auxiliary systems including, but not limited to Steam, Gas Turbine, and Diesel propulsion systems, rudders and steering gear, elevators, and deck equipment without Supervision. Capable of accomplishing the installation repair, and maintenance of ship's fluid systems which include pumps, compressors, purifiers, heat exchangers, actuators and valves without Supervision.

Analyze defects and adjusts or repairs electrical mechanical systems of outboard motors. Disassembles and inspects motor for defective parts, using mechanical hand tools.

Replaces parts like gears., magneto points, piston rings and spark plugs and reassembles engine.

Capable of accomplishing the testing of equipment to ensure systems meet 4E specifications, references and drawings without Supervision. Capable of accomplishing the installation and testing of various shop equipment. Must have ability to follow repair references and drawings and be proficient in the use of precision measuring equipment. Performs other related tasks as assigned, some of which may become essential to the position.

Job Requirements and Experience / Outside Machinist:

• 
  
• Must be 18 years of age or older to apply.
  
• Minimum 5 years of marine and/or shipyard experience preferred.
  
• Marine Hydraulics or Marine Refrigeration a plus.
  

Benefits:

• 
  
• Health Insurance (medical, dental, vision, company paid life insurance, voluntary plans such as supplemental life insurance, critical illness, and hospital indemnity)
  
• Paid Time Off
  
• Company paid holidays
  
• Retirement savings plan (401(k) plan with company matching and an Employee Stock Ownership Plan
  
• Career development opportunities
  

This position may require access to U.S. government or military sites. As such, candidates must be eligible to obtain base access clearance, which includes passing a background check and presenting valid government-issued identification. Per federal requirements, acceptable ID must be REAL ID-compliant or an approved form of federal identification, such as a valid U.S. passport.

OUTSIDE MACHINIST JOURNEYMAN

EEO/AA/Vet/Disabled

*** Sign on Bonus ***

About Means Engineering, Inc.

Means Engineering, Inc., headquartered in Carlsbad, CA, delivers innovative solutions across the medical, industrial, semiconductor, and military sectors.  We combine deep expertise in product development with a relentless commitment to design, function, and quality.

Our team is guided by our core values — Passion, Integrity, Innovation, Quality, and Ethics — ensuring every project meets the highest standards. Join us and be part of a company that values craftsmanship, collaboration, and excellence.

Key Responsibilities:

• Perform advanced-level setup and operation of milling, turning, and grinding machines.
• Troubleshoot and resolve machining issues quickly and effectively.
• Read and interpret blueprints, technical drawings, and job specifications.
• Execute high-precision benchwork and layout activities.
• Edit CNC setup sheets; suggest and implement programming or process improvements.
• Inspect parts to ensure conformance to quality standards and specifications.
• Accurately document work in the ERP system, including job status, time tracking, and nonconformance reports.
• Collaborate with Process Engineering on new product introduction (NPI) and continuous improvement projects.
• Maintain a clean, organized, and safe work environment; follow all company policies and safety

Qualifications:

• Minimum of 7 years of related machining experience.
• Strong English communication skills – able to understand verbal and written instructions, collaborate with team members, and actively participate in meetings and training.
• Math proficiency in algebra, geometry, and trigonometry.
• Exceptional measurement skills with the ability to work within tight tolerances.
• Expertise in reading and interpreting technical drawings, specifications, and quality standards.
• Ability to document quality control requirements clearly and accurately.
• Solid understanding of tooling, equipment safety, and machining best practices.
• A proactive mindset for addressing non-conforming operations and producing accurate, high-quality parts within deadlines.
• Ability to work both independently and collaboratively, with experience mentoring junior team members

JOB TITLE: Construction Estimator/Preconstruction Manager

JOB LOCATION: Carlsbad, CA

SALARY RANGE: $120,000 - $135,000/year based on experience

BENEFITS: Generous PTO, 401k, Holidays, Medical, Dental, Vision

OUR COMPANY

WE ARE GENUINE BUILDERS OF PEOPLE AND PLACES.

We’re a San Diego based commercial general contractor who builds differently by blending large company experience with the personal approach of a boutique team. With millions of square feet of commercial improvements in our history our work stands in time, long after we have left the buildings we construct; allowing those who live and work in them to become storytellers of their own lives. We promise quality and value anchored to the simple truths that people deserve to be respected for their ideas and contribution to making something world class. We’re enthusiastic about who we work with, we have a good time working, and we strive to build inspiring spaces.

OUR CORE VALUES

“TC3G”

• Team Player – It takes all of us to achieve success. Own your role and help lift your team.
• Competitive – We love to win and hate to lose. Show up every day to win.
• Genuine – Be authentic and genuine.
• GSD! – Be productive and disciplined. Get it done!
• Grit – Lean in every day. Embrace the grit.

OUR SEARCH

Dempsey Construction is seeking a driven and committed Preconstruction Manager/Estimator who is passionate about building a long-term career within our organization and contributing meaningfully to our team’s continued success.

Join a collaborative team of dedicated professionals and contribute to a diverse portfolio of projects in the years ahead. At Dempsey Construction, we foster a culture rooted in purpose, open communication, and service to others. We take pride in promoting from within and are deeply committed to supporting the growth and development of every team member.

THE IDEAL CANDIDATE MUST HAVE THESE QUALITIES

Action Oriented

Manages Complexity

Plans and Aligns

Collaborates

Manages Ambiguity

Interpersonal Savvy

Communicates Effectively

Instills Trust

Drives Results

Nimble Learning

Customer Focus

Ensures Accountability

FEATURED BENEFITS

• Medical, dental, vision insurance
• Life insurance
• 401(k) with company contribution equal to 3% of compensation
• Generous paid time off and paid holidays
• Employee Assistance Program

POSITION SUMMARY

The Preconstruction Manager/Estimator is responsible for performing and/or overseeing the preconstruction phase of projects. This includes performing and/or reviewing quantity surveys, project cost estimation, budget management, scheduling, trade partner selection, constructability reviews, value engineering, and overall project planning. They will support all preconstruction phase efforts, from concept to construction, collaborating closely with other Preconstruction Managers and Project Managers, as well as the client and design team. The candidate must be exceptionally detail-oriented, and able to work in a fast-paced, deadline-driven environment.

ESSENTIAL DUTIES AND RESPONSIBILITIES

Includes the following. Other duties may be assigned.

Business Development

• Participate in the RFP (Request for Proposal) pursuit and interview process
• Participate in project fee strategy process
• Build client relationships and help generate new business opportunities

Estimating

• Prepare conceptual, schematic, design development, and CD phase estimates as required
• Perform detailed quantity take-offs by trade using On-screen Takeoff
• Review quantity take-off and estimates that are performed by Project Manager or Assistant Project Manager
• Review proposal specifications, and drawings and attend pre-bid meetings to determine the scope of work and required contents of the estimate
• Understanding current trade costs and market trends
• Track and review building estimates and understand building construction costs as they pertain to various types of construction, including building size, shape, structure type, skin, relation of building to the site, etc.
• Build estimating tools, and spreadsheets to provide quicker responses for ROMs to clients
• Provide oversight to the development of project budgets, pricing, value-engineering, and presentations overseeing the preparation of estimates into a client presentation format
• Prepare, issue, receive and review supplier and trade partner proposals and pricing
• Coordinate with clients on changes in scope, questions, or clarifications regarding the work during the bidding process
• Review budgets and project profitability status and goals with supervision and project team as required. Seek input on corrective measures to continuously improve the accuracy of cost figures
• Must ensure a solid understanding of and comply with the company’s Code of Ethics principles
• Attend and participate in onsite meetings with clients, owners, staff, and trade partners
• Collaborate with project teams, including architects, consultants, and clients
• Maintain positive relationships with trade partners, vendors, architects, and engineers

Project Preconstruction

• Collaborate with Project Management during project Preconstruction Services phase until the buyout is complete
• Participate in pre-bid meetings, bid strategy meetings, and post-construction meetings as requested
• Review or produce progress estimates at design milestones; evaluate material and system costs, review document progress, and coordination throughout the preconstruction process
• Oversee and/or manage value engineering exercises
• Responsible for variance reports, identifying changes to project estimates
• Take the pressure off of the Project Manager during project preconstruction
• Aid Project Manager during the bidding and buyout process
• Work with Project Management regarding construction practices, techniques, strategies, and procedures
• Establish, maintain, and solidify relationships with existing and new clients

Bidding Process

• Participate with bid setup, track subcontractor bid coverage with preconstruction coordinators, and oversee bid day organization
• Ability to review bids with trade partners in detail
• Manage and oversee overall bid leveling process during bid
• Build comprehensive trade-specific requirements within the estimate
• Manage RFI responses
• If an estimate is performed, assist Job Captain leading up to bid day, and on bid day with putting numbers together
• Provide clear scopes of work to all bidders before sending out the Invitation to Bid (ITB)
• Perform all tasks of the job captain and put together the entire bid package when required

QUALIFICATIONS

• 4+ years of experience in preconstruction and/or estimating all phases of construction
• Proven experience in preconstruction management, estimating, and project planning
• Knowledge of construction codes, regulations, and industry best practices

EDUCATION

• Bachelor’s Degree in Construction Management, Engineering, Architecture, or a related field is preferred

REQUIRED SKILLS

• Microsoft Office Suite-Primarily Excel
• Bluebeam, On-Screen Takeoff (Or similar take-off software)
• Leadership and team management abilities
• Strong analytical and problem-solving skills
• Excellent communication and interpersonal skills to facilitate effective collaboration and negotiation
• Ability to work in a fast-paced, deadline-driven environment
• Strong organizational and time management skills
• Attention to detail and a commitment to delivering high-quality work

SKILLS DESIRED BUT NOT REQUIRED

• Procore
• Building Connected
• Microsoft Project

PRECONSTRUCTION MANAGER

About Level 3 Construction

Level 3 Construction is a next-generation commercial contractor recognized for leveraging technology, innovation, and process excellence to deliver superior results in hotel renovations, affordable housing, student housing, senior housing, multifamily, and mixed-use projects throughout California. We value integrity, transparency, entrepreneurial thinking, continuous improvement, and cultivating strong, long-term client and subcontractor relationships. We are committed to a safe, inclusive, and growth-oriented work environment.

Position Overview

The Preconstruction Manager leads estimating, budgeting, design coordination, value engineering, procurement strategy, and risk management for assigned projects. This role is responsible for delivering accurate budgets, competitive bids, clear cost models, and well-coordinated construction documents that support a seamless transition to operations.

The Preconstruction Manager plays a critical leadership role in guiding the project from concept through contract execution, working closely with clients, architects, engineers, subcontractors, and the Level 3 project team.

Key Responsibilities

1. Leadership & Preconstruction Strategy

·        Leads the overall preconstruction process for assigned projects, including estimating, cost planning, design coordination, project phasing, and schedule development.

·        Establishes preconstruction deliverables, internal milestones, and client communication plans.

·        Provides strategic recommendations to support client decisions regarding cost, design, and schedule.

2. Design Coordination & Document Management

·        Works collaboratively with architects, engineers, and consultants to drive design development from concept through permit/bid-ready documents.

·        Reviews drawings for accuracy, completeness, constructability, code compliance, and alignment with owner requirements.

·        Identifies missing information, scope gaps, potential conflicts, and opportunities for improvement.

·        Facilitates design milestone meetings and interdisciplinary coordination.

3. Cost Planning, Budgeting & Forecasting

·        Prepares conceptual, schematic, DD, and CD-level budgets using historical data, benchmarking, and cost modeling.

·        Tracks and updates budgets as design progresses; communicates cost impacts of design changes.

·        Conducts detailed quantity take-offs, subcontractor solicitations, bid leveling, and complete estimate assemblies.

·        Analyzes general conditions, logistics requirements, temporary facilities, and staffing needs.

4. Value Engineering & Alternative Analysis

·        Identifies cost-saving opportunities without compromising quality or performance.

·        Evaluates alternative systems (structural, envelope, MEP, interior assemblies, finishes, etc.).

·        Provides comparative cost analysis, life-cycle considerations, and schedule impacts.

·        Maintains a structured VE log and leads VE review meetings with owners and design teams.

5. Schedule Development & Phasing

·        Develops preconstruction schedules including design milestones, permit timelines, procurement strategies, long-lead items, and phasing.

·        Collaborates with operations to ensure alignment between preconstruction and field execution.

6. Procurement Strategy & Subcontractor Engagement

·        Creates bid packages, qualification requirements, and scope sheets.

·        Solicits and evaluates subcontractor bids; performs detailed bid leveling.

·        Maintains accurate subcontractor databases and actively improves bid coverage.

·        Prequalifies subcontractors based on workload, safety record, financial strength, and past performance.

7. Risk Identification & Mitigation

·        Conducts project-specific risk analyses covering design, schedule, budget, site logistics, and market risk.

·        Maintains a project risk register and proactively recommends mitigation strategies.

·        Identifies long-lead materials and supply-chain vulnerabilities.

8. GMP Development & Contract Support

·        Prepares GMP proposals, including assumptions, clarifications, allowances, alternates, and exclusions.

·        Ensures contract values accurately represent scope, design status, and risk profile.

·        Supports contract negotiation with clients, design teams, and subcontractors.

9. Client Interface & Relationship Management

·        Serves as primary client contact during the preconstruction phase.

·        Provides clear, transparent reporting on cost updates, design status, risks, and decisions required.

·        Builds trust and long-term relationships with clients, developers, architects, and industry partners.

·        Represents Level 3 at industry events, presentations, and proposal interviews as needed.

10. Project Handoff to Operations

·        Leads a formal transition to the Project Manager, Superintendent, and Operations Team.

·        Provides complete turnover documentation.

Ensures operations clearly understands project scope, constraints, and critical path items.

11. Technology, Process, & Innovation

·        Utilizes Procore, ProEst, Bluebeam, Salesforce, and other Level 3 technology platforms.

·        Maintains and improves historical cost databases and estimating standards.

·        Supports Level 3’s mission to leverage automation, analytics, and AI tools to enhance accuracy and efficiency.

·        Helps develop internal preconstruction workflows, templates, and best practices.

12. Mentorship & Team Development

·        Supervises and develops junior estimators and preconstruction staff.

·        Reviews estimates for accuracy, completeness, and alignment with Level 3 standards.

·        Leads internal training sessions and promotes continuous improvement.

Qualifications

·        Bachelor’s degree in Construction Management, Engineering, Architecture, or related field preferred.

·        5+ years of relevant estimating or preconstruction experience.

·        Strong understanding of construction means, methods, sequencing, and costs.

·        Ability to read and interpret plans, specifications, and technical documents.

·        Proficient with estimating and construction software (ProEst, Bluebeam, Procore preferred).

·        Excellent written and verbal communication skills.

·        Strong leadership, decision-making, and problem-solving abilities.

·        Ability to manage multiple projects simultaneously while meeting deadlines.

·        Experience with negotiated work, CMAR, design-build, and hard-bid procurement is preferred.

Why Join Level 3 Construction

·        Entrepreneurial, growth-focused, technology-forward environment

·        Opportunity to help shape the future of the preconstruction department

·        Diverse project types and high-impact leadership role

·        Commitment to employee development and long-term career growth

Company Description

Cannon Building, a leading general contractor specializing in life science, healthcare, commercial/institutional, and industrial sectors, is seeking an experienced Superintendent to oversee and drive the successful delivery of healthcare construction projects in the San Diego area.

As a Superintendent at Cannon Building, your primary focus will be the Cannon Building’s Safety Plan at the jobsite. Work with the Project Manager to develop a project schedule. Monitor with and assist the Project Manager in the execution of the project financial goals. Provide quality control by studying drawings, questioning uncertain details, continuously walking the job and inspecting each trades work and compare it to the contract documents. Be a problem solver prior to the work taking place and ensure that the work meets or exceeds the requirements of the contract documents.

Role Description

This is a full-time, on-site role for a Construction Superintendent – Life Science at Cannon Building. Based in Carlsbad, CA, the Construction Superintendent will oversee daily on-site operations of construction projects, ensuring they are executed on time, within budget, and meet quality and safety standards. Responsibilities include managing crews and subcontractors, ensuring compliance with safety protocols, preparing and following project schedules, and coordinating resources and materials to optimize efficiency. The role requires collaboration with project management teams and maintaining clear communication with stakeholders.

Responsibilities:

Project Planning and Coordination:

•  Monitor and document all SWPPP, BMP and storm related paperwork related to the project including job surveys and updating of the SWPPP plans and keeping all files up to date.

Leadership and Communication:

•  Provide leadership by using effective verbal and written communications to manage the subcontractors and field personnel as well as interact with the Owner, Architect and Consultants on behalf of the company.
• Organize and lead project meetings, prepare minutes, and ensure all parties understand and fulfill their obligations.

 Contract and Compliance Management:

• Ensure compliance with general conditions and contract requirements, monitoring contract documents for conformance and execution.
• Negotiate subcontract and purchase order terms, oversee subcontract execution, and manage subcontractor claims.

 Project Documentation and Systems:

• Utilize Procore to manage project documentation and costs, overseeing the preparation and reporting of RFIs, submittals, inspections, safety reports, change orders, and related documents.
• Confirm all contracts are signed and insurance is in place prior to allowing any personnel on the jobsite to perform any work. Reads and has a working knowledge of subcontracts and change orders. Review weekly project logs for insurance, RFIs, Submittals, and Material Delivery Logs to ensure the proper delivery of materials, equipment and labor to the project.
• Review shop drawings along with Project Manager to help ensure compliance with the construction documents.

Quality and Safety Assurance:

• Participate in Operations and Safety meetings, promoting and enforcing jobsite safety.
• Start up the project assessing safety requirements and site logistics. Schedule and document safety start up meetings with the subcontractors reviewing Cannon Building’s safety requirements, OSHA requirements, Site Specific Safety requirements and reporting requirements.
• Monitor work quality and perform regular inspections to ensure construction standards are consistently met.
• Enforce strong safety culture, conducting regular safety meetings, inspections, and ensuring compliance with OSHA and other safety regulations.

Travel Requirements:

•  Travel may be required; the position is based out of the San Diego region, with travel for projects as needed in Orange, Los Angeles, or San Diego counties.

Qualification and Requirements

Experience Requirement: Demonstrates a working knowledge of commercial construction with a minimum of five years of experience in this area with a focus on Life Science and Pharmaceutical

· Education/Training: Bachelor’s degree in construction management, Civil Engineering, or a related field preferred. Additional certifications in OSHPD/HCAI regulations and construction safety are a plus

· Experience as Lead Superintendent for Life Science/Pharmaceutical projects

Project Experience: Project experience valued at $2 Million or greater as a Superintendent.

• Minimum of 5 previous project experience managing Life Science/ Pharmaceutical

Excellent Written and Communication Skills: Candidates must possess excellent written and verbal communication skills, enabling effective interaction with clients, stakeholders, team members, and other project participants. Strong presentation and negotiation skills are essential to manage client expectations and influence project outcomes.

Technical Expertise: In-depth understanding of construction techniques, including reinforced concrete, wood framing methods, and engineering details, as well as electrical, mechanical, and plumbing systems.

Technical Proficiency: Proficient computer skills in Microsoft Office Suite, project management software

(Procore or similar), scheduling software (MS Project or similar), PDF management (Bluebeam), and BIM software (AutoCAD, Revit, Navisworks, or similar).

Strategic and Analytical Thinking: Ability to think strategically and make informed decisions, including analyzing project requirements, assessing risks, and developing effective strategies to meet project goals. Proactive approach to problem-solving.

Financial Management: Advanced skills in budgeting, financial management, and cost control, including developing and monitoring project budgets, tracking expenses, and ensuring financial objectives are met. Experience in managing project contracts and subcontractors.

Risk Management: Deep understanding of risk management principles and techniques, including identifying potential risks, developing risk management strategies, and implementing mitigation plans to minimize project disruptions.

 Quality Assurance: Strong focus on quality control and assurance, ensuring compliance with relevant codes, standards, and specifications. Experience in conducting quality audits and implementing quality control measures.

Client Management: Maintains good working relationships with City Officials and Inspectors. Schedules all City Inspections in advance to ensure schedule commitments are met.

Who We Are:

Cannon Building is a leading Life Science, Commercial/Institutional, Healthcare, and Industrial builder, providing highly efficient, cost-effective construction solutions with a commitment to safety and an uncompromising standard of quality. Cannon Building is proud to be a family-owned business, celebrating its 30th year in operation. We empower our employees to take the lead in achieving their own, unique goals. Our company culture is one of teamwork, inclusiveness, growth, leadership and creativity.

We respect and rely on one another for exceptional results. We promote an environment of collaboration, enjoy working together, and celebrate the success of our clients, knowing that customer success is the basis for our long-term success. To learn more about our work culture, visit our Company Website.

Our Mission: To develop long-term working relationships by providing premier commercial construction services.

Our Vision: To efficiently deliver quality projects with the highest level of customer satisfaction.

Our Values: We are professional, ethical, innovative, and accountable.

Seeking a flexible, detailed oriented team player with the ability to manage multiple tasks, produce quality work, and consistently meet deadlines. Proven expertise in healthcare with a strong network of industry contacts. Experience in Life Sciences, Construction, or similar fields is beneficial.

Compensation:

Salary: $120k to $160k DOE

Offers a competitive compensation package that includes a 401(k) plan with match: employee group dental, vision, life, and disability. Medical insurance, family dental and vision insurance, and supplemental life insurance available with reasonable employee contributions; paid holidays, vacation, and sick time; FSA

About Proper Voltage

Proper Voltage is unlocking the next generation of battery technology across robotics, data centers, and defense. We build intelligent battery systems that make advanced chemistries-sodium-ion, lithium-titanate, lithium-silicon-work in products never designed for them.

• Humanoid robots can upgrade power systems without redesigning their platform.
• Data centers get safer, cost-effective backup power.
• Drones and autonomous vehicles get higher energy density with minimal integration effort.

If you want to tackle hard engineering problems that matter-power systems enabling humanoid robots, AI infrastructure, and next-gen mobility-this is the place.

Job Overview:

As the Head of Product & Programs at Proper Voltage you will be the driving force behind the definition and delivery of our portfolio of products. You will set a clear product vision and translate it into executable programs that align the business around a single, coherent direction.

This role owns the path from concept through production and field deployment, shaping what we build, why we build it, and how it comes together. To be successful, priorities must be clear, tradeoffs intentional and teams empowered to move quickly without losing alignment or rigor. Critically though this cannot come at the cost of the creativity and ambition that drives exceptional product.

If you thrive in balancing ambition and execution, can think creatively and with rigor and are a proven leader this is where you can build something that truly endures.

Responsibilities:

• Leadership & Organisation Building
• Build and lead a team spanning product management, technical program management, systems engineering and product data management
• Act as a trusted partner to the executive team in building and delivering our product vision
• Model the behaviors and leadership qualities that define our culture, serving as a visible advocate for collaboration, ownership, and continuous improvement.
• Product Vision & Strategy
• Own and articulate a clear vision for Proper Voltage's products
• Translate customer needs, market requirements and company strategy into cohesive product roadmaps and platform strategies.
• Define product positioning, differentiation and lifecycle evolution in collaboration with commercial and engineering leadership.
• End-to-End Program Ownership
• Lead product realization from concept through to production
• Own program plans, milestones, risks and execution health across multiple concurrent product lines.
• Lead decision-making in ambiguous, fast-moving situations while maintaining product integrity and delivery discipline.
• Systems Engineering & Technical Integration
• Ensure product requirements are well-defined, traceable and balanced across all programs
• Partner closely with engineering leaders to ensure designs meet product intent and system-level requirements.
• Champion disciplined systems thinking without creating unnecessary bureaucracy.
• Product Data & Configuration Control
• Own product structure, configuration management, and change control processes.
• Ensure product data integrity across the product lifecycle
• Balance startup speed with the rigor required for an industrial customer base

Required Qualifications:

• Proven success in leading product development teams on complex electromechanical products from concept through to production
• Deep understanding of engineering and manufacturing development process and tools
• Demonstrated experience operating with high levels of ambiguity
• 12 or more years of experience in technical program management, systems, new product introduction or product engineering
• Bachelor’s or graduate degree in Electrical, Mechanical, Systems, or Aerospace Engineering.
• Strong technical background with comfort in multidisciplinary environments.
• Excellent written and verbal communication skills.
• Highly organized, detail-oriented, and driven to enforce process consistency.

Preferred Qualifications:

• Prior experience with:
• Lithium ion, sodium ion, and other advanced energy storage technologies.
• DC-to-DC converters and digital controls in power electronics.
• High-voltage battery backup systems and pulsed power systems.
• Analog, digital, and mixed-signal circuit design, simulation, and layout.
• Thermal management for high-power battery systems.
• Experience in startups or high-growth technology companies, demonstrating adaptability and versatility across engineering disciplines.

Compensation & Benefits:

• Company Equity
• Health, dental, vision insurance
• Flexible PTO with a generous holiday policy
• Hybrid-friendly work schedule, with travel as needed