Engineering Jobs in Seven Mile, OH

Compensation details: 1 Yearly Salary

PIa3124d977fd4-3631

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance:

Pratt & Whitney is working to once again transform the future of flight—designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we’re seeking the people to drive it. So, calling all curious. 

Come ready to explore and you’ll find a place where your talent takes flight—beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we’ll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that’s evolving fast to the future.

At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond?

What You Will Do:

• Follow specific directions of Leader/Supervisor to carry out repair and restoration projects for engine parts.
• Layout work requirements and obtain needed equipment to perform routine repair and alteration operations.
• Perform bench repair operations to restore parts where close tolerances are not normally required and specifically defined criteria are used.
• Recognize need and arrange for repair or replacement of equipment used in performing the work as necessary.
• .Perform routine servicing throughout the assigned area following specified procedures and written instructions such as operator’s check list for upkeep and to assure equipment operates properly.
• Assist others responsible for new process tryout, and other specialized assignments within the scope and skill level of this job description.
• .Refer difficulties to Leader/Supervisor.
• Maintain logs and records as requested to communicate findings and prepare requests for approval.
• May be required to train for, obtain and maintain licenses, operator permits, and certifications within assigned area.
• May be assigned to carry out tasks not specifically listed, within the scope and skill level of this job description in support of department objectives and to develop individual’s skills.

2nd shift hours are Monday through Friday from approximately 3 pm to 12 am.

Qualifications You Must Have:

• High School Diploma or GED.

• U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract.

• Able to obtain/ maintain active Security Clearance after Day 1 of work.

• 2 years of experience in blueprint reading, CNC manual machining & reading. Knowledge of shop math.

Qualifications We Prefer: In compliance with the collective bargaining agreement, priority consideration is given to candidates who are INTERNAL (and recall) to the Pratt & Whitney IAM Bargaining Unit members of District Lodge 26 and Affiliated Locals 700 and 1746 (Connecticut Operations).

  Pratt & Whitney in Middletown, CT is a FAA regulated facility and as such under the U.S. Departments of Transportation’s Federal Aviation Administration (FAA). This position is considered safety sensitive in accordance with FAA Guidelines. Candidate will be subject to drug and alcohol testing per FAA’s regulation 14 CFR part 120, as well as 49 CFR part 40.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

Pratt & Whitney is working to once again transform the future of flight—designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we’re seeking the people to drive it. So, calling all curious. 

Come ready to explore and you’ll find a place where your talent takes flight—beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we’ll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that’s evolving fast to the future.

At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond?

We have an immediate need for a Facilities Mechanic Pipefitter 1st Shift (onsite)

What You Will Do:

• Perform repetitive tasks related to preventative maintenance, supply and servicing of facilities, machinery and equipment.
• Assist trade groups as required.
• Under the direction of supervisor or project leader, work from specified methods and procedures, exercise care and use judgment for routine tasks associated with machine and equipment servicing and assist trades groups on projects.
• Assist others in system operation, care, use and preventative maintenance techniques where a limited knowledge of specialized trade terminology is required to understand instructions.
• Work with manufacturing departments and trades groups responsible for developing preventative maintenance servicing schedules for machine tools and equipment.
• Preform similar duties throughout the facility within the scope and skill level of this job description. Assist other trades working on joint projects where common skill crossover provides the opportunity for shared responsibilities and more effective use of skills.
• Refer difficulties to leader/supervisor.
• May be required to train for, obtain and maintain licenses, operator permits and certifications for assigned area.

Qualifications You Must Have:

• High School/ GED
• Requires knowledge of arithmetic involving decimals and fractions to work from drawings and sketches make required computations and to work with variable measuring instruments. 
• 6-12 months experience.

Qualifications We Prefer:

• Should be able to read and comprehend service manuals, instruction booklets and use mechanics’ hand and power tools.

• In compliance with the collective bargaining agreement, priority consideration is given to candidates who are INTERNAL (and recall) to the Pratt & Whitney IAM Bargaining Unit members of District Lodge 26 and Affiliated Locals 700 and 1746 (Connecticut Operations).

Learn More & Apply Now!

In addition to transforming the future of flight, we are also transforming how and where we work. We’ve introduced role types to help you understand how you will operate in our blended work environment.

This role is onsite. Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines.

Candidates will learn more about role type and current site status throughout the recruiting process. For onsite and hybrid roles, commuting to and from the assigned site is the employee’s personal responsibility.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

Pratt & Whitney is working to once again transform the future of flight—designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we’re seeking the people to drive it. So, calling all curious. 

Come ready to explore and you’ll find a place where your talent takes flight—beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we’ll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that’s evolving fast to the future.

At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond?

We have an immediate need for a Production Machinist/Processor C 2nd shift (Onsite)

What You Will Do:

Job Description

• Setup and operate one machine tool or process equipment type and operate more than one unrelated machine tool or process equipment types within an assigned area to produce precision turbine engine parts.

• Perform work where methods, procedures and processes are well developed and the required tooling, gaging and fixturing are provided.

• Under the direction of leader/supervisor, work from verbal and written instructions, operation sheets, drawings and other pertinent information. Following established methods and procedures, use manual or numerically controlled machine tools such as milling, boring, grinding, turning, broaching and shaping machines to achieve the required dimensional specifications.

• Recognize indications of dull or damaged cutting tools and replace them as needed.

• Perform bench, assembly and surface finishing operations such as deburring, blending, trimming and fitting, using a variety of hand and power tools.

• Follow prescribed methods and procedures to perform drilling, riveting and bonding operations to assemble various details in producing a finished part. Operate part-marking equipment.

• Use a variety of media, dry or liquid, to perform cleaning or part preparation and finishing operations. Operate tumbling, grit blast, shot peen, buffing and polishing equipment, wash machines and dip tanks for part surface conditioning.

• Apply masking as required. Perform applications of anti-gall and polymite coatings utilizing dry bake ovens to cure.

• Utilize a variety of fixed or variable measuring instruments to check dimensions and part features. Operate OpCert and other computer–based systems to retrieve and store information and records.

Refer difficulties to leader or supervisor.

Perform routine servicing throughout assigned area following specified procedures and written instructions, such as operators’

checklist, for upkeep and to assure equipment operates properly.

May be assigned to carry out tasks, not specifically listed, within the scope and skill level of this job description in support of department objectives and to develop individuals skills.

Qualifications You Must Have:

• High School Diploma or GED.

Qualifications we prefer:

• 1-3 years of machining experience.

• In compliance with the collective bargaining agreement, priority consideration is given to candidates who are INTERNAL (and recall) to the Pratt & Whitney IAM Bargaining Unit members of District Lodge 26 and Affiliated Locals 700 and 1746 (Connecticut Operations).

Learn More & Apply Now!

Must be a U.S. Citizen. This position may require access to systems/tools that are restricted to individuals who possess US citizenship.

In addition to transforming the future of flight, we are also transforming how and where we work. We’ve introduced role types to help you understand how you will operate in our blended work environment. This role is:

Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines.

Candidates will learn more about role type and current site status throughout the recruiting process. For onsite and hybrid roles, commuting to and from the assigned site is the employee’s personal responsibility.

EV5 Job code: PWH77771 (Production Machinist/Proc C)

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

Pratt & Whitney is working to once again transform the future of flight—designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we’re seeking the people to drive it. So, calling all curious. Come ready to explore and you’ll find a place where your talent takes flight—beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we’ll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that’s evolving fast to the future.

At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond?

What You Will Do:

Our Pratt & Whitney Middletown, CT facility has several exciting opportunities for a Production Machinist available on 1st shift .

1st shift hours are Monday through Friday from approximately 6:30 am to 3:30 pm.

In this role, you will setup and operate one machine tool or process equipment type and operate more than one unrelated machine tool or process equipment types within an assigned area to produce precision turbine engine parts. You will perform work where methods, procedures and processes are well developed and the required tooling, gaging and fixturing are provided.

• Under the direction of leader/supervisor, work from verbal and written instructions, operation sheets, drawings and other pertinent information. Following established methods and procedures, use manual or numerically controlled machine tools such as milling, boring, grinding, turning, broaching and shaping machines to achieve the required dimensional specifications. Recognize indications of dull or damaged cutting tools and replace as needed.

• Perform bench, assembly and surface finishing operations such as deburring, blending, trimming and fitting, using a variety of hand and power tools. Follow prescribed methods and procedures to perform drilling, riveting and bonding operations to assemble various details in producing a finished part. Operate part-marking equipment.

• Use a variety of media, dry or liquid, to perform cleaning or part preparation and finishing operations. Operate tumbling, grit blast, shot peen, buffing and polishing equipment, wash machines and dip tanks for part surface conditioning. Apply masking as required. Perform applications of anti-gall and polymite coatings utilizing dry bake ovens to cure.

• Utilize a variety of fixed or variable measuring instruments to check dimensions and part features. Operate OpCert and other computer–based systems to retrieve and store information and records.

• Perform routine servicing throughout assigned area following specified procedures and written instructions, such as operators’ checklist, for upkeep and to assure equipment operates properly.

• May be required to train for, obtain and maintain licenses, operator permits and certifications within assigned area.

Qualifications You Must Have:

• High School Diploma or GED equivalent with 6 months of machining experience

In compliance with the collective bargaining agreement, priority consideration is given to candidates who are INTERNAL (and recall) to the Pratt & Whitney IAM Bargaining Unit members of District Lodge 26 and Affiliated Locals 700 and 1746 (Connecticut Operations).

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

Pratt & Whitney is working to once again transform the future of flight—designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we’re seeking the people to drive it. So, calling all curious.

Come ready to explore and you’ll find a place where your talent takes flight—beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we’ll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that’s evolving fast to the future.

At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond?

This position is for 2nd shift. Hours are Monday - Friday 3:12pm - 11:59pm.

What You Will Do :

• Under direction of leader/supervisor, follow assembly drawings and/or specifications and computer information systems to prepare parts and build subassemblies, modules and accessories for new gas turbine engines where tooling and process methods are established. Perform similar duties assisting with engine test operations and performing component and accessory tests as assigned.

• Use overhaul and repair procedures and specifications to perform the mechanical work to overhaul engines, modules and related components.

• Obtain parts, check details for conformance to assembly requirements and fit and measure components to assure overall dimensions are within limits specified.

• Use mechanic’s hand tools, holding fixtures, and specialized assembly equipment to build engine sections and perform installation of details and maintain equipment and tooling for assigned areas.

• Provide related support for test operations and assist with testing under direct supervision and specific test schedules.

• Perform similar duties to assist with co-producer, customer support or other similar programs, retrofit projects and to accommodate new engine programs and assist with changes in specifications.

Qualifications You Must Have :

• High School Diploma or Equivalent & formal training in a specialized field achieving A&P license or equivalent OR 4 years of technical high school including technical post high school certification and 5+ years of heavy automotive experience.

Qualifications We Prefer:

• Experience as an aerospace mechanic or A&P mechanic preferred.

• 3 + years avionics mechanic experience.

In compliance with the collective bargaining agreement, priority consideration is given to candidates who are INTERNAL (and recall) to the Pratt & Whitney IAM Bargaining Unit members of District Lodge 26 and Affiliated Locals 700 and 1746 (Connecticut Operations).

Learn More & Apply Now!

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

Pratt & Whitney is working to once again transform the future of flight—designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we’re seeking the people to drive it. So, calling all curious. Come ready to explore and you’ll find a place where your talent takes flight—beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we’ll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that’s evolving fast to the future.

At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond?

What You Will Do:

Our Pratt & Whitney Middletown, CT facility has several exciting opportunities for a Production Machinist available on 3rd shift .

3rd shift hours are Monday through Friday from approximately 11:00 pm to 7:00 am.

In this role, you will setup and operate one machine tool or process equipment type and operate more than one unrelated machine tool or process equipment types within an assigned area to produce precision turbine engine parts. You will perform work where methods, procedures and processes are well developed and the required tooling, gaging and fixturing are provided.

• Under the direction of leader/supervisor, work from verbal and written instructions, operation sheets, drawings and other pertinent information. Following established methods and procedures, use manual or numerically controlled machine tools such as milling, boring, grinding, turning, broaching and shaping machines to achieve the required dimensional specifications. Recognize indications of dull or damaged cutting tools and replace as needed.

• Perform bench, assembly and surface finishing operations such as deburring, blending, trimming and fitting, using a variety of hand and power tools. Follow prescribed methods and procedures to perform drilling, riveting and bonding operations to assemble various details in producing a finished part. Operate part-marking equipment.

• Use a variety of media, dry or liquid, to perform cleaning or part preparation and finishing operations. Operate tumbling, grit blast, shot peen, buffing and polishing equipment, wash machines and dip tanks for part surface conditioning. Apply masking as required. Perform applications of anti-gall and polymite coatings utilizing dry bake ovens to cure.

• Utilize a variety of fixed or variable measuring instruments to check dimensions and part features. Operate OpCert and other computer–based systems to retrieve and store information and records.

• Perform routine servicing throughout assigned area following specified procedures and written instructions, such as operators’ checklist, for upkeep and to assure equipment operates properly.

• May be required to train for, obtain and maintain licenses, operator permits and certifications within assigned area.

Qualifications You Must Have:

• High School Diploma or GED equivalent with 6 months of machining experience

In compliance with the collective bargaining agreement, priority consideration is given to candidates who are INTERNAL (and recall) to the Pratt & Whitney IAM Bargaining Unit members of District Lodge 26 and Affiliated Locals 700 and 1746 (Connecticut Operations).

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Job Overview

The Manufacturing Engineer is responsible for improving production efficiency through improvements in production processes. This role involves researching and developing new manufacturing technologies to reduce costs, improve safety, reliability, and quality. This position is an integral resource for Continuous Improvement. Must be able to work with Operations, Procurement, Sales, and Quality to help ensure production and customer needs are met.

A Day In The Life

Every day at Hubbell is different and you’ll contribute in many ways. On any given day, you’ll make a difference by:

• Employing Lean manufacturing principles to all product fabrication activities in support of existing production and processes as well as new configuration of existing products.
• Supporting and leading capital projects to improve safety, production efficiency, and quality.
• Troubleshooting production problems and making recommendations based on thorough analysis.
• Driving engineering-related manufacturing changes that improve quality, cost, lead time, etc.
• Providing solutions to problems that adversely affect operator safety, quality, productivity, and cost.
• Analyzing and evaluating manufacturing methods, equipment, and standards.
• Creating 3D models and drawings using SolidWorks.
• Reviewing drawings created by others for accuracy and consistency with company standards.
• Reviewing customer specifications for comparison to company standards and capabilities.
• Issuing Engineering Change Notices with supporting documentation in accordance with company standards.
• Preparing final reports and conducting a quality check of all documents and reports, verifying accuracy of data, information, and calculations.
• Taking a leadership role in process validation and pilot production activities for new and/or improved equipment and processes.
• Investigating new technologies and options for equipment, design, and assembly.

What will help you thrive in this role?

• Bachelor’s Degree in General Engineering, Computer Science, or related field is required
• 3-6 years of experience in engineering with a focus on design, development, or project management is required
• CNC maching experience is required
• Proficiency in relevant engineering software and tools required for design, analysis, and implementation is required
• Strives to develop methods to improve and promote quality; demonstrates accuracy and thoroughness.
• Follows policies and procedures; completes administrative tasks correctly and on time; supports organization’s goals and values; benefits organization through outside activities; supports affirmative action and respects diversity.
• Displays willingness to make decisions; exhibits sound and accurate judgment; supports and explains reasoning for decisions; includes appropriate people in decision-making process; makes timely decisions.
• Demonstrates accuracy and thoroughness; looks for ways to improve and promote quality; applies feedback to improve performance; monitors own work to ensure quality.

**Sponsorship not available for this position

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance:

Pratt & Whitney is working to once again transform the future of flight—designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we’re seeking the people to drive it. So, calling all curious. 

Come ready to explore and you’ll find a place where your talent takes flight—beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we’ll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that’s evolving fast to the future.

At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond?

We have an immediate need for a Production Machinist/Processor C 3rd shift (Onsite)

FUNCTION: Setup and operate one machine tool or process equipment type and operate more than one unrelated machine tool or process equipment types within an assigned area to produce precision turbine engine parts. Perform work where methods, procedures and processes are well developed and the required tooling, gaging and fixturing are provided.

What You Will Do:

Job Description

• Under the direction of leader/supervisor, work from verbal and written instructions, operation sheets, drawings and other pertinent information. Following established methods and procedures, use manual or numerically controlled machine tools such as milling, boring, grinding, turning, broaching and shaping machines to achieve the required dimensional specifications.

• Recognize indications of dull or damaged cutting tools and replace them as needed.

• Perform bench, assembly and surface finishing operations such as deburring, blending, trimming and fitting, using a variety of hand and power tools.

• Follow prescribed methods and procedures to perform drilling, riveting and bonding operations to assemble various details in producing a finished part. Operate part-marking equipment.

• Use a variety of media, dry or liquid, to perform cleaning or part preparation and finishing operations. Operate tumbling, grit blast, shot peen, buffing and polishing equipment, wash machines and dip tanks for part surface conditioning.

• Apply masking as required. Perform applications of anti-gall and polymite coatings utilizing dry bake ovens to cure.

• Utilize a variety of fixed or variable measuring instruments to check dimensions and part features. Operate OpCert and other computer–based systems to retrieve and store information and records.

Refer difficulties to leader or supervisor.

Perform routine servicing throughout assigned area following specified procedures and written instructions, such as operators’

checklist, for upkeep and to assure equipment operates properly.

May be assigned to carry out tasks, not specifically listed, within the scope and skill level of this job description in support of department objectives and to develop individuals skills.

Qualifications You Must Have:

• High School Diploma or GED.

• U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract.

Qualifications we prefer:

• 1-3 years of machining experience.

Qualifications We Value: In compliance with the collective bargaining agreement, priority consideration is given to candidates who are INTERNAL (and recall) to the Pratt & Whitney IAM Bargaining Unit members of District Lodge 26 and Affiliated Locals 700 and 1746 (Connecticut Operations).

 Pratt & Whitney in East Hartford, CT is a FAA regulated facility and as such under the U.S. Departments of Transportation’s Federal Aviation Administration (FAA). This position is considered safety sensitive in accordance with FAA Guidelines. Candidate will be subject to drug and alcohol testing per FAA’s regulation 14 CFR part 120, as well as 49 CFR part 40.

Learn More & Apply Now!

Must be a U.S. Citizen. This position may require access to systems/tools that are restricted to individuals who possess US citizenship.

 In addition to transforming the future of flight, we are also transforming how and where we work. We’ve introduced role types to help you understand how you will operate in our blended work environment.

This role is:

Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines.

Candidates will learn more about role type and current site status throughout the recruiting process. For onsite and hybrid roles, commuting to and from the assigned site is the employee’s personal responsibility.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

This is a team position, commissions based on team goals.

Position Responsibilities:

• Discuss project requirements with customers, qualify the project, create the quotation, and submit the quotation to the customer.
• Review prior projects has been involved with to identify potential future project influencers or decision makers that should re-market to (i.e. architecture firms, engineering firms, school districts, etc.). Add those companies and contacts to Copper CRM and accurately categorize them for marketing purposes.
• Identify existing customers who have a high probability of becoming repeat customers, categorize them and work with marketing resources to start building a more in-depth relationship.
• Support the other team members by creating pricing and quotes as help is needed.
• Routinely follow-up on quoted projects, update the status of the quote and create further follow-up tasks until the project is either won or lost.
• Support the Project Management team by providing detailed upfront information on new projects, creating updated quotes as project requirements change, and providing outstanding customer service as needed.
• Perform market research to identify potential customers, add them to the CRM and reach out to start building dialogue.
• Answer questions about the product offerings, advantages, and guide our customers to the correct product for the application needed.
• Perform outbound sales calls to generate quote opportunities.

Qualifications and Skills:

• Bachelor’s degree or comparable record of sales experience
• Minimum 2 years sales experience preferred
• Excellent written and verbal communication skills
• Strong organization skills and attention to detail
• Positive attitude and ability to be a team player
• Works comfortably under pressure and meets tight deadlines
• Comfortable negotiating with customers
• Knowledge or background in the construction industry preferred

Job Title : Nuclear Engineer (Naval Reactors Engineer) Category / Component : Officer • Active Overview Design, regulate, and oversee the Navy's nuclear propulsion program, including reactor design, fleet operations, and eventual defueling and decommissioning of nuclear powered ships and submarines from Naval Reactors Headquarters and associated Department of Energy laboratories and shipyards.

Key Responsibilities Provide technical direction in areas such as reactor and fluid systems design, reactor physics, materials development, component design for steam generators, pumps, and valves, instrumentation and control for reactor and propulsion plants, testing and quality control, radiation shielding, and chemistry and radiological controls; review designs and analyses from laboratories, shipyards, and industry partners; coordinate with fleet units to ensure safe and reliable nuclear plant operation.

What to Expect Assume significant technical responsibility early in your career as part of a lean headquarters staff; work primarily in an analytical and oversight role rather than operating plants at sea; balance long term engineering projects with time sensitive fleet and shipyard issues; frequent coordination with senior civilian engineers, naval officers, and technical teams; high expectations for attention to detail, judgment, and written and oral communication.

Work Environment Work mainly at Naval Reactors Headquarters in the Washington, District of Columbia area with regular engagement with Department of Energy laboratories, nuclear training sites, shipyards, and nuclear powered ships and submarines; office based work that includes document reviews, technical meetings, inspections, and site visits rather than day to day shipboard watchstanding.

Pathways, Training & Advancement Officer commissioning through programs such as Officer Candidate School or the Nuclear Propulsion Officer Candidate program followed by a structured technical qualification program at Naval Reactors; rotational exposure to laboratories, prototypes, shipyards, and fleet support issues; progressive responsibility leading projects and becoming a subject matter expert, with opportunities for professional military education and advanced graduate study in technical fields.

Entry through the Nuclear Propulsion Officer Candidate program for qualified college students and recent graduates, or selection via Officer Candidate School for those who already hold qualifying degrees; all applicants must meet Nuclear Propulsion Program academic and technical screening standards in addition to general officer commissioning requirements.

Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy.

Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter.

Additional qualifications for this job may include: Completion of a rigorous technical degree in engineering, physics, mathematics, or a closely related field that includes strong backgrounds in calculus and physics; outstanding academic record, particularly in technical coursework; United States citizenship and eligibility for a high level security clearance; strong technical aptitude and comfort with detailed analytical work.

Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities.

Specific options depend on the Sailor's status, training, and current Navy policy.

Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options.

Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance.

Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed.

Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source.

Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community.

It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes.

Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.

The Cost Estimator is responsible for analyzing project requirements and preparing accurate cost estimates for steel tube products, fabrication, and related services. This role involves evaluating tubular dimensions, specifications, technical drawings, material requirements, labor, production processes, and market pricing to support competitive quoting, profitability analysis, and strategic decision‑making.

Key Responsibilities

Estimating & Analysis

• Prepare detailed and accurate quotations for PTG’s tubular products, including raw materials, processing, fabrication, packaging, and transportation.
• Review prints, specifications, and customer requirements to determine material dimensions, tolerances, and manufacturing needs.
• Apply production times, labor rates, equipment usage, and overhead allocations.
• Evaluate supplier quotes for raw steel, coatings, finishes, and outsourced services.
• Maintain cost models for various steel tube sizes, grades, and manufacturing scenarios.
• Conduct post‑project or post‑quote variance reviews by comparing estimated vs. actual costs and update cost models accordingly.
• Perform cost‑related risk assessments and develop alternative pricing scenarios based on material volatility, production constraints, or changing customer requirements.

Quoting & Pricing

• Prepare customer quotes and proposals within required timelines.
• Ensure pricing aligns with company margin guidelines, market conditions, and cost fluctuations.
• Collaborate with sales, purchasing, and operations to confirm pricing strategies and feasibility.

Data & Documentation

• Maintain a database of historical cost information, supplier pricing, and industry benchmarks.
• Track steel market price trends and adjust estimates accordingly.
• Document all estimate assumptions, data sources, and calculation methodologies.

Cross‑Functional Collaboration

• Work closely with engineering and production teams to identify cost‑saving opportunities.
• Identify and recommend process improvements, alternative materials, or production methods that reduce cost while maintaining quality and feasibility.
• Coordinate with purchasing to validate material availability and updated pricing.
• Support management with budgeting, forecasting, and profitability analysis.
• Interact with Sales and customers to ensure all customer needs are met.

Qualifications

Required

• Experience in cost estimating, preferably within steel manufacturing, metal fabrication, or industrial products.
• Strong understanding of steel tube specifications such as gauge, alloy grades, tolerances, and forming processes.
• Ability to read and interpret engineering drawings (CAD experience a plus).
• Proficiency in Excel or estimating software.
• Strong mathematical and analytical skills.
• Accounting education.
• Bachelor’s Degree.

Preferred

• Background in manufacturing, industrial engineering, or supply chain.
• Experience with ERP or MRP systems.
• Knowledge of welding methods, cutting, bending, and finishing processes related to steel tubular products.

Key Skills

• Cost analysis and modeling
• Technical drawing interpretation
• Vendor and cost negotiation
• Attention to detail and accuracy
• Strong communication and documentation skills
• Time management and the ability to prioritize and handle multiple quotes simultaneously

Work Environment

• Office‑based with regular collaboration with sales, purchasing, and operations departments.
• Occasional shop‑floor visits to observe processes and validate estimating assumptions.

About AppJaxx
AppJaxx is a rapidly growing marketing agency that helps marketing agencies, franchisors, business brokers, and B2B service providers scale through LinkedIn lead generation, appointment-setting systems, and automated CRM processes. Our focus is on combining data, technology, and strategy to create predictable growth for our clients.

As we continue to expand, we’re looking for a Head of Cyber Security to lead our security vision, strengthen our infrastructure and data protection, and ensure the safety, compliance, and resilience of our systems as we scale.

Position Overview
The Head of Cyber Security will own AppJaxx’s overall security strategy and execution. This role is responsible for designing, implementing, and continuously improving security architecture, policies, monitoring systems, and risk management frameworks to protect company data, client information, and operational continuity.

The ideal candidate is both strategic and hands-on—someone who can build enterprise-grade security environments, proactively identify vulnerabilities, implement modern defense mechanisms, and align cybersecurity initiatives with business growth and compliance requirements.

Key Responsibilities

Own and execute the company’s overall cybersecurity strategy aligned with business growth and risk management goals.
Design, implement, and maintain secure infrastructure, networks, applications, and data protection systems.
Establish security policies, governance frameworks, and compliance standards across the organization.
Monitor threats, vulnerabilities, and incidents while leading rapid detection, response, and remediation processes.
Collaborate closely with Engineering, Operations, Client Delivery, and Leadership to ensure security is embedded across all systems and workflows.
Oversee security audits, penetration testing, access controls, encryption standards, and identity management.
Ensure compliance with relevant data protection and privacy regulations.
Develop incident response plans, disaster recovery processes, and business continuity strategies.
Evaluate, implement, and manage cybersecurity tools, platforms, and external security vendors.
Lead and grow the cybersecurity function, including hiring, training, and performance management.
Continuously identify opportunities to strengthen security posture using automation, AI-driven threat detection, and emerging cybersecurity technologies.

We’re seeking an experiencedChief Technology Officer (CTO) to lead and advise onenterprise technology architecture and innovation acrossAI, Cloud, Cybersecurity, CX, Networking, Unified Communications, IoT, Mobility, and Contact Center solutions.

This role is ideal for a CTO or senior technology leader who excels at translatingbusiness strategy into scalable, secure, and modern technology platforms.

• Define and guide enterprise technology architecture and roadmap
  
  
• Lead AI adoption, cloud strategy, and platform modernization
  
  
• Oversee security-by-design across infrastructure and applications
  
  
• Evaluate, select, and align best-fit technology partners and vendors
  
  
• Collaborate with executive stakeholders on innovation and scalability
  
  
• Serve as senior technical authority in strategic decision-making
  
  

• 10+ years in senior technology leadership (CTO, VP Engineering, Head of Tech)
  
  
• Deep experience inCloud platforms, architecture, and modern stacks
  
  
• Strong understanding ofcybersecurity, data, and systems integration
  
  
• Business-minded leader who balances innovation with execution
  
  
• Experience operating across complex, multi-vendor environments
  
  

• Strategic leadership without day-to-day delivery burden
  
  
• Influence high-impact technology decisions across organizations
  
  
• Flexible, advisory-driven engagement model
  
  
• Exposure to cutting-edge AI, cloud, and security initiatives
  
  

You’re a senior technology leader who wants toshape modern architectures, influence enterprise outcomes, and operate at the intersection ofinnovation, scalability, and security.