Engineering Jobs in Santa Ana

The Environmental Health & Safety Manager (EHS) is responsible to ensure compliance with all safety rules and regulations, the physical security of all company locations, and to assist individuals to be in compliance. This position is responsible for ensuring company is in compliance with all agencies (DOT, OSHA, NFPA, and EPA) regulations, training, and any other requirements by such agencies, our insurance companies, and company requirements. The EHS Manager will serve as a subject matter expert on all safety, compliance, regulatory and related insurance requirements.

Pay Range: $120,000 to $135,000.00 per year

Essential Duties and Responsibilities include the following. Other duties may be assigned.

• 
  
• Serve on local safety committees; review and discus safety needs, provide updates, training, DOT, Hazmat, OSHA and related safety and compliance information.
  
• Implement and manage a comprehensive safety training program base on OSHA and industry specific requirements.
  
• Manage the workplace ergonomics program, active response and adjustments result in negating any mandatory program requirements.
  
• Review facility procedures and work instructions consistent with ISO formatting.
  
• Develop Safety Risk Assessment procedures
  
• Provide subject matter expertise in Process Safety ensuring industry best practice.
  
• Site inspections and corrective action(s):
  
• Train and direct management to inspect facilities, work sites and equipment for violations and hazards.
  
• Provide direction to management on correcting identified problems in a timely manner.
  
• Follow up to make sure all corrective actions were taken and completed.
  
• Assist where needed.
  
• Responsible for updating, maintaining and auditing location safety standards and procedures on a quarterly or annual basis as needed.
  
• Develop effective training programs for managers/employees that will efficiently cover all needed/required materials.
  
• Investigate all accidents to determine the root cause and provide recommendations that eliminate or reduce future hazard or risk.
  
• Track and control inventory of safety supplies and equipment and work with division managers to keep adequate safety supplies on-hand.
  
• Assist with training for new hires and provide ongoing training of all employees.
  
• Review and update MSDS and SPCC plans as needed
  
• Evaluate the effectiveness of the safety program using established goals and make recommendations, and implement corrective action(s) based on industry standards and best practices.
  
• Conduct an annual training for the site that promotes a safe, healthy, and secure work environment that includes emergency situations (like tornados, fires), use of the alarm system, and anything else necessary to promote a safe work environment.
  
• Serves as a safety/compliance liaison with outside organizations.
  

Required Skills:

? Extensive knowledge of OSHA, DOT, NFPA, EPA, other governmental regulations and laws including OSHA 300 logs and requirements by our insurance providers.

? Knowledge of instructional methods and training techniques

Qualifications:

? Bachelor's degree in safety or related field or equivalent work experience.

? 5 years safety management experience.

? Excellent interpersonal, communication, and problem solving skills.

? Knowledge of statistics, data collection and analysis.

? Knowledge of federal and state regulations.

? Proficient in MS Office products.

? Occasional travel required.

Prefer:

? OSHA General Industry 10 or 30 hour training course

? Forklift training experience

This position is currently accepting applications.

Apply Now

The Quality Inspector is responsible for the inspection, documentation, and certification of critical components throughout the production process, including parts subject to flight safety requirements. This role ensures compliance with AS9100, customer specifications, and regulatory requirements through precise measurement and rigorous recordkeeping.

Essential Duties & Responsibilities:

Performs various inspection activities utilizing precision inspection equipment at all phases of product manufacturing. Uses GD&T concepts, customer supplied specifications, and internal standards, to ensure compliance with AS9100, NADCAP, and other regulatory requirements.

Pay Range: $30.00 to $36.00 per hour

• 
  
• Read and understand complex engineering drawings to determine dimensions and tolerance specifications
  
• Compare recorded measurements to blueprint dimensions and tolerances and notify specified persons of discrepancies using NCF and MRB process
  
• Familiarity with the use of various inspection and measurement equipment, i.e. CMM, FARO Arm, Borescope, Optical Comparator, etc. preferred
  
• Strong understanding of units of measure and applicability to GD&T principles
  
• Must be self-motivated and able to adjust to a dynamic work environment and tempo while maintaining a high level of attention to detail.
  
• Strong professional ethics combined with the ability to function well on teams.
  

• 
  
• Experience in aerospace manufacturing or similarly regulated industry preferred.
  
• Familiarity with performing various inspection activities to include, i.e., 1st piece, in-process, final inspections
  
• High School Diploma or GED
  
• Knowledgeable of MS Word, and Excel
  
• Minimum of 3 to 5 years' experience in the operation of CMM's preferred (Mitutoyo/Metris/Zeiss)
  
• Familiarity with operation/programming of FARO arm preferred
  

This position is currently accepting applications.

Apply Now

Associate Attorney – Construction Defect Litigation

Location: Santa Ana, California

Experience Level: 0–7+ Years (Entry-level and lateral candidates encouraged to apply) Compensation: $120,000 – $190,000 depending on experience

The Opportunity

Our client is seeking a motivated and detail-oriented Attorney to join their premier Construction Defect practice group. This is a unique "any experience" opening: we are equally interested in Entry-Level Attorneys eager to build a career in a specialized field, and Lateral Associates from other litigation backgrounds (such as General Liability or PI) looking to pivot into complex, multi-party construction disputes.

For junior candidates, we provide a robust mentorship program and a clear path toward independent case handling. For experienced candidates, we offer a high-level caseload with opportunities for trial experience and client management.

Key Responsibilities

• Case Management: Manage all phases of construction defect litigation, representing developers, general contractors, or subcontractors in residential and commercial disputes.
• Discovery: Draft and respond to discovery requests, including complex document productions involving blueprints, job files, and inspection reports.
• Depositions: Prepare for and conduct depositions of plaintiffs, expert witnesses (engineers, architects), and site personnel.
• Expert Collaboration: Work closely with forensic experts to identify structural deficiencies, water intrusion issues, and standard-of-care violations.
• Advocacy: Draft and argue substantive motions (Demurrers, Summary Judgment) and attend court hearings and mediations.
• Reporting: Maintain proactive communication with insurance carriers and clients, providing clear analysis of liability and exposure.

Requirements

• Credentials: Juris Doctor (JD) from an accredited law school and active license in good standing with the California Bar.
• Litigation Interest: A strong desire to master the "nuts and bolts" of construction—you must be comfortable learning how buildings are built and where they fail.
• Writing Skills: Exceptional research and writing skills are required for handling the dense motion practice characteristic of construction law.
• Organization: Ability to thrive in a high-volume environment where cases involve dozens of parties and thousands of pages of technical documents.
• Travel: Willingness to attend on-site inspections and property "walk-throughs" with experts as needed.

Preferred Skills (But Not Required)

• Experience with the Right to Repair Act or similar pre-litigation statutes.
• Background in engineering, architecture, or construction management.
• Previous experience in insurance defense or general civil litigation.

Major, Lindsey & Africa’s client is in immediate need of an Interim Commercial Counsel (Gov’t Contracts).

Overview: Interim Commercial Counsel to assist in the drafting, reviewing, and negotiating a variety of commercial agreements, with a focus on government contracts.

Company: Orange County-based global provider of manufacturing and engineering services for complex applications in aerospace, defense and industrial markets.

Experience: 5-10 years of experience commercial contracts.

Location: Costa Mesa, CA

Responsibilities Include:

Contract Review & Negotiation

• Review of government contracts.
• Some review and negotiation of vendor/supplier agreements, focusing on:
• Vendor markups and risk allocation
• Ensuring FAR/DFARS flow-down compliance
• Some additional review and negotiation of other commercial agreements, e.g. customer-facing agreements and NDAs.

Risk Management

• Apply existing contract review matrix and roadmap for markups.
• Confirm risk transfer and compliance with government contracting requirements.

Collaboration

• Work closely with internal stakeholders to align on risk tolerance and business priorities.

Qualifications Include:

• JD from an accredited law school and bar license in at least one US state.
• 5–10 years (ideal mix of law firm and in-house experience).
• Experience in government contracts, including familiarity with FAR/DFARS.
• Ability to work onsite in Orange County.
• Detail-oriented, high energy and enthusiasm, strong judgment, ability to work independently with minimal supervision.

Pay Range: $110/hour

Information regarding benefits can be found on MLA’s Website on the Consultant Resources Page:

All interested and qualified candidates should apply directly with Major, Lindsey & Africa for review and consideration. Major, Lindsey & Africa does not discriminate against applications on the basis of age, sex, race or any other protected characteristics pursuant to applicable state or federal laws.

Job ID: 244923

• Develop, implement, and maintain the Quality Management System (QMS).
• Plan, conduct, and coordinate internal and supplier audits to ensure compliance with regulatory and accreditation standards (e.g., CLIA, CAP).
• Manage document control, change control, CAPA, nonconformance management, complaint handling, and MDR/Vigilance activities.
• Coordinate proficiency testing programs and analyze results to identify trends and improvement opportunities.
• Ensure all required regulatory licenses and accreditations remain current.
• Maintain quality documentation, SOPs, and laboratory testing procedures.
• Prepare, analyze, and present quality metrics and reports for management review.
• Train and onboard new personnel; review training documentation and monitor ongoing competency of testing staff.
• Maintain working knowledge of laboratory protocols, specimen processing, equipment operation and maintenance, and data analysis.
• Review and approve product labeling, packaging, promotional materials, and technical documentation for regulatory compliance.
• Monitor changes in global regulations, standards, and guidance; assess impact and recommend updates to internal processes.
• Partner with cross-functional teams (R&D, manufacturing, engineering, clinical, marketing) to embed quality and regulatory requirements early in product development.
• Lead or support management reviews, regulatory and quality training programs, and continuous improvement initiatives.
• Prepare, submit, and maintain regulatory filings, documentation, and reports.
• Coordinate with regulatory and accreditation bodies to support product approvals, certifications, and inspections.
• Ensure compliance with internal health and safety policies; report and address violations as required.
• Participate as an external auditor on College of American Pathologists (CAP) inspection teams, as required by the CAP accreditation program.
  
  

• Bachelor's degree (required) in life sciences, biology, chemistry, engineering, pharmacy, or related field; Master's a plus
• 3+ years of laboratory experience, including experience with audits, compliance systems, and regulatory submissions.
• Strong knowledge of key regulations and standards: FDA QSR (21 CFR Part 820/211), ISO 13485/9001, EU MDR/IVDR, GMP, ICH guidelines, etc.
• Working knowledge of relevant regulatory frameworks
• Professional certification is a plus (i.e, Regulatory Affairs Certification – RAC, ASQ Certified Quality Auditor – CQA).
• CLS Generalist or CGMBS license preferred
• Proven knowledge of quality assurance terminology, software, methods, and tools.
• Previous experience with Laboratory Information Management Systems is preferred.
• Proficient in QMS software (i.e. MediaLab, TrackWise, MasterControl or similar)
• Strong analytical, problem-solving, and decision-making skills.
• Experience in compliance and/or regulatory and knowledge of laboratory standards and regulations
• Experience with Microsoft Office Suite; Word, Outlook, Excel
• Excellent written and verbal communication skills for agency interactions, technical writing, and cross-functional collaboration.
• Able to effectively present information and respond to questions from various stakeholders
  
  

WHY TENANT

At Tenant, Inc., we’re modernizing the self-storage industry through intuitive technology and customer-first solutions. You’ll work alongside thoughtful, driven teammates who value ownership, collaboration, and growth. This role offers hands-on exposure to customer success in a fast-growing SaaS environment and the opportunity to build a strong foundation for a long-term career in Customer Success.

JOB SUMMARY

The Customer Success Manager plays a key role in supporting customer adoption, satisfaction, and retention. This position partners closely with senior Customer Success, Sales, Product, and Support teams to ensure customers receive timely guidance, proactive support, and consistent value from the Tenant platform.

This role is ideal for someone who is customer-centric, organized, eager to learn, and excited to grow within a SaaS customer success organization. You will support a mix of small to mid-market and select high-touch customers while developing the skills needed to manage more complex accounts over time.

KEY RESPONSIBILITIES

Customer Ownership & Retention Support

• Manage revenue retention, engagement plans and flag at-risk in assigned customer base.
• Support a portfolio of customers by serving as a day-to-day success contact.
• Monitor customer engagement, usage, and health indicators to identify potential risks or opportunities.
• Participate in customer check-ins, QBR preparation, and follow-ups under the guidance of senior team members.
• Support renewal and expansion efforts by reinforcing product value and customer outcomes.

Customer Success Execution

• Assist with onboarding activities to help customers successfully launch and adopt the Tenant platform.
• Guide customers through product features, workflows, and best practices.
• Help maintain and update customer success playbooks, templates, and enablement materials.
• Develop deep familiarity with Tenant’s products and act as a trusted product resource for customers.

Cross-Functional Collaboration

• Partner with Sales, Support, Product, and Engineering teams to address customer needs and feedback.
• Escalate customer issues appropriately and help track resolutions.
• Assist with customer communications related to product updates or service notifications when needed.
• Maintain accurate customer records, tasks, and workflows in and other tools.

Operational Excellence & Learning

• Track customer health, adoption metrics, and engagement trends.
• Learn how to interpret customer data and translate insights into action.
• Support continuous improvement of Customer Success processes and documentation.
• Assist with support overflow or customer inquiries during peak periods.

TEAM & CULTURE

• Build strong working relationships across a collaborative, mostly remote team.
• Demonstrate a customer-first mindset, accountability, and eagerness to learn.
• Participate in team meetings, training sessions, and professional development opportunities.
• Contribute positively to a culture of growth, feedback, and shared success.

QUALIFICATIONS & EXPERIENCE

• 1–3 years of experience in a customer-facing role (Customer Success, Support, Account Management, Sales, or similar), preferably in a SaaS environment.
• Strong interest in Customer Success, customer experience, and technology.
• Excellent communication skills—written, verbal, and interpersonal.
• Highly organized with the ability to manage multiple tasks and priorities.
• Comfortable working with data and learning how to use metrics to guide decisions.
• Experience with tools like Zendesk, , CRM systems, or similar platforms is a plus.
• Curious, proactive, and motivated to grow into a more senior Customer Success role over time.

Tenant, Inc. is an equal opportunity employer and does not discriminate on the basis of race, color, religion, sex, gender identity or expression, sexual orientation, national origin, age, disability, veteran status, or any other protected characteristic under applicable law. #CSMJobs, #StartupCareers, #Mondaydotcom, #Zendesk#NowHiring #CustomerSuccess #CustomerSuccessManager #SaaSJobs #CustomerExperience #CustomerRetention

#TechCareers #B2BSoftware #PropTech #SelfStorage #GrowthCareer #EarlyCareerJobs

#RemoteJobs #CustomerFirst

Mechanical Assembler
Tustin, CA
6 Month Contract to Hire
$20-$21 an hour

Summary: 

Immediate hire at thriving company. Will be responsible for filling out the verification sheet for each job assigned. Reading and understanding assembly drawings. Read and understand assembly, test and packaging procedures. Complete necessary paperwork accurately for each Job order following GDP (Good Documentation Practices). Follow 5s processes. Package and label all products including batteries from cleanroom. Set up, Client out parts and maintain a clean working environment at all times . Performs a range of routine mechanical assembly of small parts or components in accordance with company instructions and procedures . Performs mechanical assemblies, subassemblies and potting. Visually inspect assemblies and subassemblies in progress to ensure compliance with assembly drawings and assembly procedures. Test air motor, medical devices following test established procedures. Reports on any unusual problems that occur during testing, packaging or assembling components. Notify assembly supervisor or manager of discrepancies. Identify non -conformance and initiate require documentation. Documentation may include (Non - conforming material report). Request parts from stockroom when needed. Sign and approve first articles.

Requirements:

• Understand Clock ON and Clock OFF Jobs.
• Strong attention to detail in every assembly, or task assigned.
• Able to read and understand work orders, interpret drawings and assembly procedures.
• Experience using hand tools and equipment to aid assembly.
• Ability to operate drill press, a variety air equipment, and electrical tools.

Welcome to ConsultNet, a premier national provider of technology talent and solutions. Our expertise spans across project services, contract-to-hire, direct search, and managed services onshore, nearshore, and hybrid. For over 25 years, we have connected thousands of consultants with meaningful roles through a personal, communication-driven approach, partnering with a diverse client base to build high-performing teams and create lasting impact. Our comprehensive service offerings cover a wide range of technology and engineering positions across key markets nationwide. Learn more at .

We champion equality and inclusivity, proudly supporting an Equal Opportunity Employer policy. We welcome applicants regardless of Race, Color, Religion, Sex, Sexual Orientation, Gender Identity, National Origin, Age, Genetic Information, Disability, Protected Veteran Status, or any other status protected by law.

We are seeking a Director, Strategic Trade Compliance to join our team. In this role you will be the senior authority responsible for overseeing the company’s global import, export, and sanctions compliance programs. This role defines and executes enterprise trade compliance strategy, ensures adherence to U.S. and international trade regulations, and partners with executive leadership to mitigate regulatory risk while enabling efficient global commerce.

The Director leads a global or multi-regional team of trade professionals, governs compliance frameworks and internal controls, drives digital and systems transformation, and serves as the primary liaison with government agencies and regulators.

This position reports the Vice President of Strategic Soucing, Procurement and Supplier Quality and is based in Irvine, CA.

As the Director of Strategic Trade Compliance, you will have the following key responsibilities:

Strategy, Leadership & Governance

• Define and execute the global trade compliance strategy across import, export, and sanctions.
• Serve as a trusted advisor to executive leadership, delivering insights on trade risk, regulatory changes, and cost optimization.
• Lead, develop, and scale a global or regional team of trade compliance professionals.
• Establish and govern enterprise trade compliance policies, procedures, and internal control frameworks.
• Monitor global legislative and regulatory developments (Customs, ITAR, EAR, OFAC, trade remedies) and guide proactive business response.

Import Compliance (Core Expertise)

• Oversee global import compliance programs ensuring accurate customs declarations, documentation, and controls.
• Act as subject matter authority on tariff classification, valuation, country of origin, and partner government agency requirements.
• Optimize use of Free and Preferential Trade Agreements (FTAs) and duty-savings programs.
• Govern Foreign Trade Zone (FTZ) compliance and operations, including CTPAT, Importer Self-Assessment (ISA), Duty Drawback, and Reconciliation.
• Manage exposure to trade remedies and regulations, including IEEPA, Sections 232 & 301, antidumping, and countervailing duties.
• Partner with customs brokers and government agencies to resolve audits, inquiries, and compliance issues.

Export Compliance (Advanced Working Knowledge)

• Oversee export compliance programs aligned with ITAR, EAR, and Foreign Trade Regulations (FTR).
• Lead jurisdiction and classification determinations (USML/CCL).
• Manage export licensing and authorizations, including DSP-5 licenses, TAAs, and Commerce licenses.
• Oversee export authorizations through DECCS and SNAP-R.
• Govern deemed export controls, technology control plans, and end-use/end-user/destination restrictions.
• Deliver training and guidance to internal stakeholders on export control requirements.

Sanctions & Restricted Party Compliance

• Govern OFAC sanctions compliance, including restricted party screening and beneficial ownership due diligence.
• Ensure effective screening tools, escalation protocols, and recordkeeping processes are maintained.

Risk Management, Audits & Regulatory Engagement

• Lead internal audits, compliance assessments, investigations, and remediation activities.
• Manage voluntary disclosures and regulatory communications with CBP, BIS, DDTC, and OFAC.
• Represent the company in regulatory matters, audits, and industry associations.

Systems, Data & Transformation

• Drive automation and digital enablement of trade compliance processes.
• Lead enterprise trade system initiatives (e.g., SAP S/4HANA, SAP GTS, Descartes), including design, implementation, and governance.
• Leverage ACE trade data, dashboards, KPIs, and analytics to monitor performance and risk.
• Manage large-scale programs and budgets, ensuring timely delivery, adoption, and sustained outcomes.

Cross-Functional Collaboration

• Partner with Supply Chain, Sourcing, Legal, Engineering, Finance, Tax, IT, Logistics, and Procurement teams.
• Advise business leaders on sourcing strategies, product design, distribution models, and market entry decisions.
• Embed trade compliance requirements into enterprise processes and systems.

You have:

• Experience: 10+ years of progressive experience in international trade compliance within a multinational organization, global consulting firm, or law firm.
• Education: Bachelor’s degree in International Business, Law, Supply Chain, Logistics, Engineering, or related field.
• Licensed Customs Broker (LCB).
• Regulatory expertise in customs and import compliance (core), export controls under ITAR and EAR and OFAC sanctions compliance
• Leadership: Demonstrated success leading global or matrixed teams and enterprise compliance programs.
• Systems Knowledge: Experience with enterprise trade systems (e.g., SAP GTS, Descartes), ACE Portal, and government platforms (DECCS, SNAP-R).
• Skills: Strong analytical, communication, and executive stakeholder management capabilities.

You might have:

• Advanced degree (MBA, MS, JD, or LL.M. in International Trade).
• Experience managing compliance or transformation initiatives exceeding $1M in budget.
• Industry experience in manufacturing, industrial products, applied sciences, consumer goods, or regulated industries.
• Prior leadership of major ERP or digital trade transformations.

POSITION:

RIMOWA is seeking a highly accomplished and passionate Client Advisor. The Client Advisor is responsible for driving sales through exceptional client service, strong product knowledge, and deep understanding of the luxury retail environment. This role focuses on building lasting client relationships, delivering an outstanding in‑store experience, and contributing to the overall success of RIMOWA while serving as a true brand ambassador.

YOUR RESPONSIBILTIES:

Sales

• Consistently achieve and surpass individual sales objectives, directly contributing to the store’s overall commercial success and prestige.
• Serve as a true brand ambassador, conveying RIMOWA’s storied heritage, iconic designs, engineering, and uncompromising craftsmanship.
• Curate and cultivate an exclusive and loyal client portfolio, building enduring relationships and driving sustained repeat business through personalized engagement, client appointments, and events.
• Actively support and inspire colleagues, fostering a sophisticated, collaborative, and high-performance sales environment.

Customer Service

• Embody the RIMOWA brand ethos at all times, presenting yourself with impeccable professionalism.
• Deliver a seamless, white-glove post-purchase experience by meticulously managing client follow-ups, repairs, and service requests with discretion and care.
• Anticipate client needs through an intimate knowledge of the brand’s history, new product launches, and the competitive luxury landscape.
• Create memorable, elevated moments for every client, ensuring each interaction reflects the refinement synonymous with RIMOWA.

Operations

• Execute all POS transactions with precision and efficiency.
• Confidently open and close the store register in full compliance with company policies.
• Participate proactively in inventory management while upholding the highest standards of loss prevention.
• Maintain exceptional visual merchandising, ensuring the store consistently reflects a polished, luxurious, and inviting aesthetic.
• Always uphold immaculate store presentation and operational readiness.

PROFILE:

• Proven success in a premium or luxury retail environment
• Demonstrated expertise in developing, nurturing, and retaining a discerning clientele; an established luxury client book is highly desirable.
• Impeccable personal presentation with exceptional communication skills
• Strong problem-solving capabilities, a refined attention to detail.
• A deep appreciation for luxury craftsmanship, travel and elevated lifestyles.
• Flexible availability, including evenings, weekends, and holidays.
• Able to regularly lift and handle Items up to 20 lbs.
• Multilingual In Spanish, French, Portuguese, and/or Mandarin a plus.

OUR COMPANY:

DISPLAYIT Inc. stands as an acclaimed designer and manufacturer, specializing in the creation of structured experiential environments. Established in 1998 in Irvine, California, currently expanding operation in Texas. DISPLAYIT is dedicated to designing, constructing, and installing innovative structural branded solutions that convey a cohesive brand message for our valued customers.

At the heart of our success is a team of highly talented individuals who collaborate creatively at the highest level, aiming to deliver the finest custom experiences. Our commitment is underscored by our relentless pursuit of creative solutions to exceed customer expectations. We exist not only to meet but to surpass the needs of our customers, and our unwavering focus is on operational efficiency.

Join us in our journey at our state-of-the-art facilities located in the vibrant city of Irvine, where innovation and excellence converge.

SUMMARY:

The additional Technical Draftsperson will play a key role in our engineering department, collaborating closely with the design, fabrication, and project management teams to translate conceptual design into well-coordinated, technically accurate construction documents. This role requires a firm grasp of fabrication methods, architectural detailing, industry standards, and a proactive approach to problem-solving. The selected candidate will contribute to projects across the entire design-to-fabrication spectrum, ensuring precision, efficiency, and adherence to project timelines. Under the direction of the Project Manager and Director of Design/Technology, the 3D Technical Designer/Drafter produces shop drawings for multiple elements or entire projects. The ideal candidate must possess excellent technical design skills and some leadership skills to develop and implement solutions and communicate them to stakeholders effectively.

DUTIES AND RESPONSIBILITIES:

• Develop detailed shop drawing packages and architectural drawings, including plans, elevations, sections, and details, to provide clients, project managers, and fabrication leads with an accurate representation of the design intent, scope of work, materials, and fabrication/assembly methods.
• Collaborate with the design team to ensure seamless integration of aesthetic and functional aspects into technical drawings. Proactively identify potential design and fabrication issues and propose solutions.
• Meet deadlines and achieve high-quality, on-budget outcomes by establishing and maintaining effective communication among the project team, fabricators, clients, vendors, contractors, and consultants.
• Conduct thorough reviews of technical documents to ensure accuracy, completeness, and compliance with industry standards and regulations.
• Implement best practices and standards to accelerate project timelines while maintaining quality.
• Ensure the design complies with company standards, client requirements, and other specifications (ADA, Building Codes, etc.)
• Prepare facility impact documentation to share with the architect, client, and general contractors, detailing the necessary infrastructure to integrate and install the exhibit.
• Identify opportunities for process optimization and efficiency improvements within the design and engineering workflow. Utilize relevant software tools and platforms to enhance the efficiency and accuracy of fabrication drawings.

QUALIFICATIONS:

• Associate or Bachelor’s Degree in Engineering, Architecture Industrial Design, Interior Design, or other related Design/Engineering specialization preferred.
• Minimum of 5-10 years of post-college experience as a drafter/detailer for one or more of the following fields: Cabinetry/Millwork, Furniture, Retail, Hospitality, Commercial Architecture, Museum, Trade Show Exhibits, Theater, and Amusement Park projects.
• Proficiency in 2D/3D Design in Rhino or a willingness to learn it within a few months of starting.
• Exceptional proficiency in at least one of the following programs: Rhino, AutoCAD, Fusion, Inventor, SolidWorks, SketchUp, Vectorworks, ArchiCAD, and Revit.
• Strong knowledge of materials/finishes, fabrication tools, and techniques to develop highly detailed 3D models, fabrication drawings, and assembly instructions supporting the design/manufacturing process.
• Strong analytical and problem-solving skills
• General knowledge of building design and documentation
• Fabrication experience is a plus.
• Ability to effectively communicate verbally and in writing, as well as interpret verbal and written instructions.
• Ability to manage multiple projects and drawings simultaneously with attention to detail.
• Ability to prioritize and meet deadlines with limited supervision.
• Experience designing or programming for CNC and Laser Cutting Machines preferred.
• Working knowledge of Microsoft Office Suite, PDF editors, and other support software.
• Bilingual in Spanish/English is a plus.

COMPETENCIES

• Problem Solving--Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully; Develops alternative solutions; Works well in group problem solving situations; Uses reason even when dealing with emotional topics.
• Written Communication--Writes clearly and informatively; Edits work for spelling and grammar; Varies writing style to meet needs; Presents numerical data effectively; Able to read and interpret written information.
• Customer Service--Manages difficult or emotional customer situations; Responds promptly to customer needs; Solicits customer feedback to improve service; Responds to requests for service and assistance; Meets commitments.
• Adaptability--Adapts to changes in the work environment; Manages competing demands; Changes approach or method to best fit the situation; Able to deal with frequent change, delays, or unexpected events.

PHYSICAL DEMANDS AND WORK ENVIRONMENT:

• Frequently required to stand
• Frequently required to walk
• Frequently required to sit
• Frequently required to utilize hand and finger dexterity
• Frequently required to talk or hear
• Occasionally required to lift/push/carry items that may exceed 35 pounds

Job Type: Full-time

Benefits:

• 401(k)
• 401(k) matching
• Dental insurance
• Health insurance
• Life insurance
• Paid time off
• Vision insurance

Schedule:

• Monday to Friday

Work setting:

• In-person
• Office