Engineering Jobs in Rocky Hill, CT
74 positions found — Page 7
H
Maintenance Manager
🏢 Habasit
Salary not disclosed
OVERVIEW OF POSITION:
The mission of the Maintenance Manager is to manage maintenance functions for a facility. Areas included are building utility systems, equipment maintenance and building and grounds maintenance. Ensures that maintenance department objectives are met including project, cost, quality and safety factors.
RESPONSIBILITIES OF THIS POSITION:
- Leads the Maintenance team to ensure efficient and effective support for Production and the facility, including:
-Support in training of Maintenance personnel.
-Assists and guides Maintenance personnel as needed.
-Is responsible for the safety and good housekeeping work habits of all Maintenance personnel.
-Assigns priorities and work to Maintenance personnel.
-Participates in Maintenance personnel evaluations.
-Order supplies according to business needs within limits.
-Oversees and coordinates Maintenance projects.
- Ensures that maintenance department objectives are met including project, cost, quality and safety factors.
- Responsible for developing and maintaining PM program for the company.
- Is on call to come to work during off shift hours to help in emergency situations.
- Attend and participate in training opportunities and seminars relevant to this position.
- Foster a of continuous improvement environment with clearly defined objectives and plans.
- Provide continued support to meet the objectives.
- Responsible for the annual EPA reporting and corresponding regular system checks.
- Support in Capital requests as needed.
- Makes sure that all work is performed according to Local, State and Federal Government rules and regulations.
- Ensures that outside contractors perform as specified on the contracts and follow all Habasit rules and regulations.
- Areas included, but are not limited to, are building utility systems, equipment maintenance and building and grounds maintenance.
- Any other duties as assigned.
COMPETENCIES/SPECIFIC EXPERIENCE OR TRAINING PREFERRED:
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements/preferences listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
- Required – Bachelors Degree in Engineering or Related Field
- Required – Five years experience in manufacturing/production/assembly environments
- Required – Competency with Process Improvement/Lean concepts
- Required – High Competency with MS Word, Excel, PowerPoint, CRM Applications
- Preferred – Electricians, Plumbing, Welding Licenses
Not Specified
J
CNC Lead Lathe Machinist - 2nd Shift
🏢 Jobot
Salary not disclosed
Lead a precision aerospace team on 2nd shift — growth, stability, and hands-on leadership in East Hartford! This Jobot Job is hosted by: Jamie Beene Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.
Salary: $65,000
- $90,000 per year A bit about us: We are a family-owned manufacturer with over 75 years of excellence in producing precision aerospace components.
Our culture values teamwork, accountability, and continuous improvement, with a strong commitment to quality and customer satisfaction.
Why join us? Be part of a trusted aerospace manufacturer with long-standing industry partnerships Opportunity to lead and mentor a skilled 2nd shift production team Stability of a family-owned company with a reputation for excellence Growth potential in a culture that promotes from within Competitive compensation and benefits package Job Details Job Details Supervise, lead, and motivate the 2nd shift production team to meet goals in quality, safety, and delivery Assign workloads, monitor performance, and provide feedback and coaching to team members Ensure compliance with company policies, work instructions, and safety procedures Collaborate with quality and engineering to resolve production issues and maintain process improvements Maintain accurate records of production activity, labor, and attendance Requirements 3+ years of leadership or supervisory experience in a manufacturing environment (aerospace preferred) Strong knowledge of machining, production processes, and lean principles Excellent communication, problem-solving, and organizational skills Ability to work 2nd shift full-time on-site in East Hartford, CT Proficiency with Microsoft Office and ERP systems a plus Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Salary: $65,000
- $90,000 per year A bit about us: We are a family-owned manufacturer with over 75 years of excellence in producing precision aerospace components.
Our culture values teamwork, accountability, and continuous improvement, with a strong commitment to quality and customer satisfaction.
Why join us? Be part of a trusted aerospace manufacturer with long-standing industry partnerships Opportunity to lead and mentor a skilled 2nd shift production team Stability of a family-owned company with a reputation for excellence Growth potential in a culture that promotes from within Competitive compensation and benefits package Job Details Job Details Supervise, lead, and motivate the 2nd shift production team to meet goals in quality, safety, and delivery Assign workloads, monitor performance, and provide feedback and coaching to team members Ensure compliance with company policies, work instructions, and safety procedures Collaborate with quality and engineering to resolve production issues and maintain process improvements Maintain accurate records of production activity, labor, and attendance Requirements 3+ years of leadership or supervisory experience in a manufacturing environment (aerospace preferred) Strong knowledge of machining, production processes, and lean principles Excellent communication, problem-solving, and organizational skills Ability to work 2nd shift full-time on-site in East Hartford, CT Proficiency with Microsoft Office and ERP systems a plus Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Not Specified
B
Electrical Test Engineer
Salary not disclosed
We are seeking a detail-oriented Electrical Test Engineer with experience in hardware systems and embedded firmware environments. This role focuses on validating the functionality, reliability, and performance of electronic products through structured test development and execution. The ideal candidate will collaborate with multidisciplinary engineering teams to support product quality throughout the development lifecycle.
Key Responsibilities
Test Development & Validation
- Create and implement structured test plans, procedures, and scripts to verify hardware and firmware requirements.
- Perform functional, performance, and reliability testing on embedded systems and electronic assemblies.
- Ensure products meet defined specifications and quality benchmarks.
Automation & Tools Development
- Develop and maintain automated test frameworks for electronic systems.
- Build scripts and utilities to streamline validation processes and improve repeatability.
- Contribute to continuous enhancement of test infrastructure and methodologies.
Debugging & Root Cause Analysis
- Troubleshoot firmware and hardware issues using standard laboratory instrumentation.
- Analyze system behavior to isolate faults and support corrective actions.
- Partner with development engineers to resolve defects efficiently.
System Integration Testing
- Validate interaction between hardware components (e.g., PCBs, sensors, communication interfaces) and embedded firmware.
- Conduct integration and regression testing to ensure overall system stability.
Cross-Functional Collaboration & Documentation
- Work closely with engineering, quality, and project stakeholders to coordinate testing activities.
- Document test procedures, results, and defect reports in a clear and organized manner.
- Provide technical feedback to support design improvements.
Process Improvement
- Identify opportunities to improve validation processes, coverage, and efficiency.
- Stay current with emerging tools, technologies, and best practices in electronic testing.
Required Qualifications
- Bachelor’s degree in Electrical Engineering or related discipline from an accredited institution.
- Solid understanding of circuit analysis and electronic theory (AC/DC fundamentals).
- Working knowledge of analog and digital circuits, including amplifiers, switching circuits, regulators, filters, and I/O interfaces.
- Hands-on experience with common lab equipment such as oscilloscopes, digital multimeters, and signal generators.
- Experience with schematic capture tools, CAD platforms, and integrated development environments.
- Proficiency in embedded firmware development using C/C++.
- Familiarity with electronic component selection and evaluation.
- Understanding of PCB assembly processes and electronic manufacturing fundamentals.
- Strong analytical, documentation, and communication skills.
- Ability to work effectively within cross-disciplinary engineering teams.
Preferred Qualifications
- Experience with communication interfaces such as CAN, USB, Ethernet, or similar protocols.
- Exposure to embedded Linux environments.
- Familiarity with wireless communication technologies.
- Experience using issue tracking and collaboration tools.
- Working knowledge of version control systems (e.g., Git or similar tools).
Not Specified
K
Field Engineer
Salary not disclosed
Overview Keller is the world leader in geotechnical construction and deep foundations.
With a North American presence of over 100 years, we operate as the market leader with over 50 offices throughout the US and Canada.
By connecting global resources and local experience, Keller develops innovative, practical, and cost-effective solutions to geotechnical challenges.
Our values of integrity, collaboration, and excellence enable us to lead the industry in providing the optimal solution for our clients.
Keller is looking for an experienced Field Engineer based out of our Middleton, Connecticut location.
Responsibilities This Field Engineer position requires travel to projects within the region to gain real world construction engineering and management experience.
This experience provides the highly qualified civil engineer an opportunity to learn first-hand the complex world of Geotechnical and Deep Foundation Construction.
Keller is an excellent fit for a candidate who decided to become a civil engineer to work in Construction that includes a balance of design and construction management with a combination of field and office work.
Qualifications BS Degree in Civil Engineering Sound technical knowledge Problem solving and common sense Communication and teamwork Commercial instincts Get-it-done attitude Ability to meet hectic and changing schedules and deadlines Extensive travel up to three years Career path to office Project Manager position Additional Information Salary Range: $65,000
- $80,000 per year Actual salary will be based on a variety of factors including relevant internal and external experience, knowledge, skills, scope of job, geographical location or other factors permitted by law Benefits: 401(k) + matching Health, Dental, Vision insurance Life insurance Paid time off (PTO) Holiday Pay Keller is an Equal Opportunity Employer.
We encourage qualified women, minorities, veterans, individuals with disabilities, and others to apply.
Equal Employment Opportunity
With a North American presence of over 100 years, we operate as the market leader with over 50 offices throughout the US and Canada.
By connecting global resources and local experience, Keller develops innovative, practical, and cost-effective solutions to geotechnical challenges.
Our values of integrity, collaboration, and excellence enable us to lead the industry in providing the optimal solution for our clients.
Keller is looking for an experienced Field Engineer based out of our Middleton, Connecticut location.
Responsibilities This Field Engineer position requires travel to projects within the region to gain real world construction engineering and management experience.
This experience provides the highly qualified civil engineer an opportunity to learn first-hand the complex world of Geotechnical and Deep Foundation Construction.
Keller is an excellent fit for a candidate who decided to become a civil engineer to work in Construction that includes a balance of design and construction management with a combination of field and office work.
Qualifications BS Degree in Civil Engineering Sound technical knowledge Problem solving and common sense Communication and teamwork Commercial instincts Get-it-done attitude Ability to meet hectic and changing schedules and deadlines Extensive travel up to three years Career path to office Project Manager position Additional Information Salary Range: $65,000
- $80,000 per year Actual salary will be based on a variety of factors including relevant internal and external experience, knowledge, skills, scope of job, geographical location or other factors permitted by law Benefits: 401(k) + matching Health, Dental, Vision insurance Life insurance Paid time off (PTO) Holiday Pay Keller is an Equal Opportunity Employer.
We encourage qualified women, minorities, veterans, individuals with disabilities, and others to apply.
Equal Employment Opportunity
Not Specified
J
Quality Manager
🏢 Jobot
Salary not disclosed
Quality Manager – Aerospace Manufacturing (AS9100) This Jobot Job is hosted by: Jamie Beene Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.
Salary: $100,000
- $140,000 per year A bit about us: Founded nearly 80 years ago and based in East Hartford, with other offices across Connecticut, we are a precision aerospace manufacturing partner supporting some of the most demanding OEMs and Tier 1 suppliers in the industry.
We specialize in complex, high-reliability components where quality systems, disciplined processes, and technical rigor are non-negotiable.
Our teams work closely with customers to ensure compliance, traceability, and continuous improvement across every stage of manufacturing.
Why join us? Competitive Compensation: Up to ~$145,000 base salary (DOE) 401(k) with Generous Match Comprehensive Benefits: Medical, Dental, Vision, Life Insurance Generous PTO & Paid Holidays Leadership Impact: Own and shape the quality function for complex aerospace programs Collaborative Work Environment: Partner closely with engineering, operations, and customers Stability + Growth: Long-standing aerospace manufacturer with modernized systems and continuous investment Job Details Key Responsibilities and Duties Lead and develop Quality Engineers supporting internal non-conformances, supplier issues, and customer escapes Manage daily inspection priorities across first-piece, in-process, final, receiving, FAI, and DQR over-inspection Schedule and coordinate third-party source inspections as required Interpret customer drawings, specifications, and contractual quality requirements Ensure compliance throughout contract review, manufacturing travelers, inspection plans, FAIs, PPAPs, and related documentation Develop, implement, and train quality policies, procedures, and standard work aligned with AS9100/ISO9001 Build and maintain standard workflows for CAPA, RCCA, NCMR/DMR, and RMA activity within ERP/eQMS systems (Epicor) Lead internal, customer, supplier, and third-party audits; maintain metrics, scorecards, and corrective action tracking Own onboarding, training, cross-training, and performance management for the quality team Act as the technical authority for quality decisions, approvals, and judgment calls Maintain compliance with export controls including ITAR and DFARS Qualifications — Needed B.S.
in Engineering or similar technical discipline Minimum 7–10 years of experience applying quality systems in an AS9100 aerospace manufacturing environment Prior supervisory or indirect team leadership experience strongly preferred Experience supporting Raytheon Technologies (Collins Aerospace / Pratt & Whitney), GE Aviation, or similar aerospace OEMs Strong background in PPAP, APQP, and First Article Inspection (FAI) Familiarity with critical component and flight safety processes (ESA, VSE, SPS) Deep knowledge of inspection methods, metrology, gage selection, calibration, MSA, and SPC Proven experience leading internal and external audits and management reviews Experience building or enhancing ERP and/or eQMS systems to manage CAPA, NCMR, RMA, audits, training records, and scorecards Epicor ERP experience is a plus Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Salary: $100,000
- $140,000 per year A bit about us: Founded nearly 80 years ago and based in East Hartford, with other offices across Connecticut, we are a precision aerospace manufacturing partner supporting some of the most demanding OEMs and Tier 1 suppliers in the industry.
We specialize in complex, high-reliability components where quality systems, disciplined processes, and technical rigor are non-negotiable.
Our teams work closely with customers to ensure compliance, traceability, and continuous improvement across every stage of manufacturing.
Why join us? Competitive Compensation: Up to ~$145,000 base salary (DOE) 401(k) with Generous Match Comprehensive Benefits: Medical, Dental, Vision, Life Insurance Generous PTO & Paid Holidays Leadership Impact: Own and shape the quality function for complex aerospace programs Collaborative Work Environment: Partner closely with engineering, operations, and customers Stability + Growth: Long-standing aerospace manufacturer with modernized systems and continuous investment Job Details Key Responsibilities and Duties Lead and develop Quality Engineers supporting internal non-conformances, supplier issues, and customer escapes Manage daily inspection priorities across first-piece, in-process, final, receiving, FAI, and DQR over-inspection Schedule and coordinate third-party source inspections as required Interpret customer drawings, specifications, and contractual quality requirements Ensure compliance throughout contract review, manufacturing travelers, inspection plans, FAIs, PPAPs, and related documentation Develop, implement, and train quality policies, procedures, and standard work aligned with AS9100/ISO9001 Build and maintain standard workflows for CAPA, RCCA, NCMR/DMR, and RMA activity within ERP/eQMS systems (Epicor) Lead internal, customer, supplier, and third-party audits; maintain metrics, scorecards, and corrective action tracking Own onboarding, training, cross-training, and performance management for the quality team Act as the technical authority for quality decisions, approvals, and judgment calls Maintain compliance with export controls including ITAR and DFARS Qualifications — Needed B.S.
in Engineering or similar technical discipline Minimum 7–10 years of experience applying quality systems in an AS9100 aerospace manufacturing environment Prior supervisory or indirect team leadership experience strongly preferred Experience supporting Raytheon Technologies (Collins Aerospace / Pratt & Whitney), GE Aviation, or similar aerospace OEMs Strong background in PPAP, APQP, and First Article Inspection (FAI) Familiarity with critical component and flight safety processes (ESA, VSE, SPS) Deep knowledge of inspection methods, metrology, gage selection, calibration, MSA, and SPC Proven experience leading internal and external audits and management reviews Experience building or enhancing ERP and/or eQMS systems to manage CAPA, NCMR, RMA, audits, training records, and scorecards Epicor ERP experience is a plus Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Not Specified
M
Geographic Information System (GIS) Analyst
🏢 MDC
Salary not disclosed
The Metropolitan District Commission (MDC) provides quality water supply, water pollution control, mapping, and household hazardous waste collection to eight member municipalities: Bloomfield, East Hartford, Hartford, Newington, Rocky Hill, West Hartford, Wethersfield and Windsor.
Additionally, the MDC provides drinking water to portions of Farmington, Glastonbury, East Granby and South Windsor, known as the MDC's non-member towns .
JOB SUMMARY This is highly responsible professional geographic information systems analysis, digital database analysis and administration work involving the maintenance of software and hardware of a computerized digital database.
Work involves responsibility for effective and efficient maintenance of a geographic information system.
Duties include development and implementation of upgrades to system components, providing support to project engineers and outreach staff, map creation, data creation, data analysis, data management, and database development.
This position also has the responsibility for making difficult geographic information system quality control and assurance decisions.
This work requires that the employee have knowledge, skill and ability in computer platforms, Windows operating systems, or comparable, automated mapping and facilities management software.
SUPERVISION RECEIVED Works under the general supervision of the Director of Information Technology or other appropriate staff.
MINIMUM QUALIFICATIONS A bachelor's degree from a recognized college or university in geography, geographic information systems, or a related field plus two (2) years of progressively responsible experience in geographic information system hardware and software operations and maintenance and at least some experience with a Windows, or comparable, operating system.
SPECIAL REQUIREMENTS Must have a valid driver's license.
KNOWLEDGE, SKILLS, AND ABILITIES Knowledge of geographic information systems and cartographic principles and practices.
Knowledge of Structured Query Language (SQL), system programming, and database administration.
Knowledge of public administration principles and practices as applied to work unit reporting and routing administrative procedures.
Knowledge of cartography, geodesy and photogrammetry as related to digital databases.
Ability in oral and written communications.
Ability to administer policies and procedures including planning, routine decision-making, and report development and writing.
Ability to establish and maintain effective working relationships with coworkers, consultants, vendors, town officials, other utilities, and other governmental agencies.
ADA COMPLIANCE Physical Ability : Tasks require the ability to exert light physical effort in a sedentary to light work environment, which may involve some lifting, carrying, pushing and/or pulling of objects and materials of light weight (under 25 pounds).
Sensory Requirements : Some tasks require the ability to perceive and discriminate visual cues or signals.
Some tasks require the ability to communicate orally and in writing.
Environmental Factors : Essential functions are performed primarily indoors with minimal exposure to outdoor environmental factors.
The Metropolitan District Commission is an Equal Opportunity Employer.
In compliance with the Americans with Disabilities Act, the Commission will provide reasonable accommodations to qualified individuals with disabilities and encourages both prospective and current employees to discuss potential accommodations with the employer.
For more information, or to apply now, you must go to the website below.
Please DO NOT email your resume to us as we only accept applications through our website.
ESSENTIAL FUNCTIONS The following duties are normal for this position.
The omission of specific statements of the duties does not exclude them from the classification if the work is similar, related, or a logical assignment for this classification.
Other duties may be required and assigned.
Develops, collects, implements and maintains the geographic information system data base files and data management procedures.
Develops and implements system maintenance standards.
Monitors system security, cartographic standards, data base protocol and is responsible for data management.
Coordinates the geographic information system support contracts and other vendor contracts, and agreements.
Prepares cost estimates for upgrades, contracts, agreements, and technical reports, as required.
Coordinates implementation and application of computer hardware and software with consultants and vendors.
Assists the Manager of Engineering Technical Services in preparation of the annual budget as it relates to system improvement requirements.
Coordinates the technical needs of other user groups both inside and outside the District and programs and administers the network hardware and software.
Provides technical support to internal staff.
Creates maps showing project extents, extent/progress of projects, and other ad hoc maps as requested.
Performs special assignments, as directed.
Researches and develops new programs to improve system management and efficiency.
Performs related work as required.
Additionally, the MDC provides drinking water to portions of Farmington, Glastonbury, East Granby and South Windsor, known as the MDC's non-member towns .
JOB SUMMARY This is highly responsible professional geographic information systems analysis, digital database analysis and administration work involving the maintenance of software and hardware of a computerized digital database.
Work involves responsibility for effective and efficient maintenance of a geographic information system.
Duties include development and implementation of upgrades to system components, providing support to project engineers and outreach staff, map creation, data creation, data analysis, data management, and database development.
This position also has the responsibility for making difficult geographic information system quality control and assurance decisions.
This work requires that the employee have knowledge, skill and ability in computer platforms, Windows operating systems, or comparable, automated mapping and facilities management software.
SUPERVISION RECEIVED Works under the general supervision of the Director of Information Technology or other appropriate staff.
MINIMUM QUALIFICATIONS A bachelor's degree from a recognized college or university in geography, geographic information systems, or a related field plus two (2) years of progressively responsible experience in geographic information system hardware and software operations and maintenance and at least some experience with a Windows, or comparable, operating system.
SPECIAL REQUIREMENTS Must have a valid driver's license.
KNOWLEDGE, SKILLS, AND ABILITIES Knowledge of geographic information systems and cartographic principles and practices.
Knowledge of Structured Query Language (SQL), system programming, and database administration.
Knowledge of public administration principles and practices as applied to work unit reporting and routing administrative procedures.
Knowledge of cartography, geodesy and photogrammetry as related to digital databases.
Ability in oral and written communications.
Ability to administer policies and procedures including planning, routine decision-making, and report development and writing.
Ability to establish and maintain effective working relationships with coworkers, consultants, vendors, town officials, other utilities, and other governmental agencies.
ADA COMPLIANCE Physical Ability : Tasks require the ability to exert light physical effort in a sedentary to light work environment, which may involve some lifting, carrying, pushing and/or pulling of objects and materials of light weight (under 25 pounds).
Sensory Requirements : Some tasks require the ability to perceive and discriminate visual cues or signals.
Some tasks require the ability to communicate orally and in writing.
Environmental Factors : Essential functions are performed primarily indoors with minimal exposure to outdoor environmental factors.
The Metropolitan District Commission is an Equal Opportunity Employer.
In compliance with the Americans with Disabilities Act, the Commission will provide reasonable accommodations to qualified individuals with disabilities and encourages both prospective and current employees to discuss potential accommodations with the employer.
For more information, or to apply now, you must go to the website below.
Please DO NOT email your resume to us as we only accept applications through our website.
ESSENTIAL FUNCTIONS The following duties are normal for this position.
The omission of specific statements of the duties does not exclude them from the classification if the work is similar, related, or a logical assignment for this classification.
Other duties may be required and assigned.
Develops, collects, implements and maintains the geographic information system data base files and data management procedures.
Develops and implements system maintenance standards.
Monitors system security, cartographic standards, data base protocol and is responsible for data management.
Coordinates the geographic information system support contracts and other vendor contracts, and agreements.
Prepares cost estimates for upgrades, contracts, agreements, and technical reports, as required.
Coordinates implementation and application of computer hardware and software with consultants and vendors.
Assists the Manager of Engineering Technical Services in preparation of the annual budget as it relates to system improvement requirements.
Coordinates the technical needs of other user groups both inside and outside the District and programs and administers the network hardware and software.
Provides technical support to internal staff.
Creates maps showing project extents, extent/progress of projects, and other ad hoc maps as requested.
Performs special assignments, as directed.
Researches and develops new programs to improve system management and efficiency.
Performs related work as required.
Not Specified
M
Cost Analyst
🏢 MDC
Salary not disclosed
The Metropolitan District Commission (MDC) provides quality water supply, water pollution control, mapping, and household hazardous waste collection to eight member municipalities: Bloomfield, East Hartford, Hartford, Newington, Rocky Hill, West Hartford, Wethersfield and Windsor.
Additionally, the MDC provides drinking water to portions of Farmington, Glastonbury, East Granby and South Windsor, known as the MDC's non-member towns .
JOB SUMMARY The purpose of this classification is to provide professional level work related to maintaining The Metropolitan District's cost accounting system.
This classification will assist in analyzing cost accounting data.
Additionally, this classification will be responsible for project costing, variance analysis, inventory reporting and fixed asset management.
Minimum Qualifications A minimum of four (4) years of work experience in cost accounting is required; Bachelor's degree in accounting, finance or closely related field is preferred; or any equivalent combination of education, training, and experience which provides the requisite knowledge, skills, and abilities for this classification.
CPA or CMA preferred.
Prior banking experience, including the reconciliation and tracking of complex financial data is preferred.
Ideal candidate will possess outstanding organizational and communication skills.
Relevant education, experience, skills, managerial/supervisory ability, and performance aptitudes as reflected in the position's job specification.
The MDC seeks to enhance the diversity of its workforce.
People of color, women, veterans and persons with disabilities are strongly encouraged to apply.
The selected candidate will undergo an internal background check .
EOE/AA/M/F/D/V For more information, or to apply now, you must go to the website below.
Please DO NOT email your resume to us as we only accept applications through our website.
ESSENTIAL FUNCTIONS The following duties are normal for this position.
The omission of specific statements of the duties does not exclude them from the classification if the work is similar, related, or a logical assignment for this classification.
Other duties may be required and assigned.
Maintains cost accounting system including all related reconciliations, and develops standard cost data and accurate inventory valuation.
Reviews cost detail of capital projects to ensure integrity of project costs.
Works with the Controller to implement strong financial controls within cost standards and monitor effectiveness of those controls.
Develops, calculates and revises all pricing and overhead rates.
Analyzes cost allocations.
Assists General Accounting and Financial Control functions in identifying and implementing opportunities for cost savings and productivity improvement.
Reports on periodic variances and their causes and perform cost accumulation tasks.
This involves working closely with engineering and operations personnel.
Tracks capital expenditures associated with grants and loans Tracks assessable sewer fund activity including assessments, capital expenditures, debt, grants, loans, and cost sharing projects Assists with bond sales and state IFO and PLO closings Performs related work as required
Additionally, the MDC provides drinking water to portions of Farmington, Glastonbury, East Granby and South Windsor, known as the MDC's non-member towns .
JOB SUMMARY The purpose of this classification is to provide professional level work related to maintaining The Metropolitan District's cost accounting system.
This classification will assist in analyzing cost accounting data.
Additionally, this classification will be responsible for project costing, variance analysis, inventory reporting and fixed asset management.
Minimum Qualifications A minimum of four (4) years of work experience in cost accounting is required; Bachelor's degree in accounting, finance or closely related field is preferred; or any equivalent combination of education, training, and experience which provides the requisite knowledge, skills, and abilities for this classification.
CPA or CMA preferred.
Prior banking experience, including the reconciliation and tracking of complex financial data is preferred.
Ideal candidate will possess outstanding organizational and communication skills.
Relevant education, experience, skills, managerial/supervisory ability, and performance aptitudes as reflected in the position's job specification.
The MDC seeks to enhance the diversity of its workforce.
People of color, women, veterans and persons with disabilities are strongly encouraged to apply.
The selected candidate will undergo an internal background check .
EOE/AA/M/F/D/V For more information, or to apply now, you must go to the website below.
Please DO NOT email your resume to us as we only accept applications through our website.
ESSENTIAL FUNCTIONS The following duties are normal for this position.
The omission of specific statements of the duties does not exclude them from the classification if the work is similar, related, or a logical assignment for this classification.
Other duties may be required and assigned.
Maintains cost accounting system including all related reconciliations, and develops standard cost data and accurate inventory valuation.
Reviews cost detail of capital projects to ensure integrity of project costs.
Works with the Controller to implement strong financial controls within cost standards and monitor effectiveness of those controls.
Develops, calculates and revises all pricing and overhead rates.
Analyzes cost allocations.
Assists General Accounting and Financial Control functions in identifying and implementing opportunities for cost savings and productivity improvement.
Reports on periodic variances and their causes and perform cost accumulation tasks.
This involves working closely with engineering and operations personnel.
Tracks capital expenditures associated with grants and loans Tracks assessable sewer fund activity including assessments, capital expenditures, debt, grants, loans, and cost sharing projects Assists with bond sales and state IFO and PLO closings Performs related work as required
Not Specified
J
Senior CNC/CAM Programmer
🏢 Jobot
Salary not disclosed
Senior CNC/CAM Programmer – Multi-Axis Aerospace Machining This Jobot Job is hosted by: Jamie Beene Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.
Salary: $33
- $38 per hour A bit about us: Founded nearly 80 years ago and based in East Hartford, Connecticut, we are a precision aerospace manufacturer supporting some of the most demanding OEM customers in the world.
With deep roots in advanced machining, quality excellence, and continuous improvement, we partner closely with leading aerospace and defense organizations to deliver mission-critical components that meet the highest performance and certification standards.
Why join us? Competitive Compensation: DOE, aligned to senior-level CNC/CAM expertise 401(k) with Company Match Comprehensive Benefits: Medical, Dental, Vision Paid Company Holidays & PTO Tuition Reimbursement & Ongoing Training (including ESPRIT) Highly Technical Work: Precision & ultra-precision aerospace machining Direct Impact: Bridge engineering and manufacturing in a high-visibility role 100% Onsite: East Hartford, CT manufacturing facility Job Details Key Responsibilities & Duties Develop advanced CNC programs using ESPRIT CAM to optimize precision aerospace manufacturing Generate and optimize G-code for multi-axis lathes and vertical machining centers Collaborate with Engineering and Operations to define tooling, workholding, metrology, and deburring processes Document approved manufacturing methods within ESPRIT tooling and datasheet libraries Leverage parametric programming, macros, and CAM automation across part families Perform hands-on machine setup and support first-run production during process development Optimize toolpaths, material removal rates, surface finishes, and production yields Train production personnel to ensure repeatability and smooth production transitions Manage CNC programs and setup data within PDM and DNC systems Act as a technical SME supporting lean initiatives, cycle time reduction, and quality improvements Research emerging manufacturing technologies and recommend productivity investments Qualifications — Needed Bachelor’s degree in Engineering preferred (or equivalent progressive hands-on experience) Minimum 5+ years of advanced manufacturing experience in precision or ultra-precision environments Expert-level knowledge of Fanuc controls Proven CNC programming experience with CAM software ESPRIT CAM experience preferred (Mastercam, PartMaker, SolidCAM acceptable; training provided) Strong background in tooling systems, workholding, and CNC machine setup Experience with advanced techniques such as on-machine probing and tool setters Familiarity with manufacturing enterprise systems; Epicor ERP experience a plus Ability to bridge engineering intent and shop-floor execution Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Salary: $33
- $38 per hour A bit about us: Founded nearly 80 years ago and based in East Hartford, Connecticut, we are a precision aerospace manufacturer supporting some of the most demanding OEM customers in the world.
With deep roots in advanced machining, quality excellence, and continuous improvement, we partner closely with leading aerospace and defense organizations to deliver mission-critical components that meet the highest performance and certification standards.
Why join us? Competitive Compensation: DOE, aligned to senior-level CNC/CAM expertise 401(k) with Company Match Comprehensive Benefits: Medical, Dental, Vision Paid Company Holidays & PTO Tuition Reimbursement & Ongoing Training (including ESPRIT) Highly Technical Work: Precision & ultra-precision aerospace machining Direct Impact: Bridge engineering and manufacturing in a high-visibility role 100% Onsite: East Hartford, CT manufacturing facility Job Details Key Responsibilities & Duties Develop advanced CNC programs using ESPRIT CAM to optimize precision aerospace manufacturing Generate and optimize G-code for multi-axis lathes and vertical machining centers Collaborate with Engineering and Operations to define tooling, workholding, metrology, and deburring processes Document approved manufacturing methods within ESPRIT tooling and datasheet libraries Leverage parametric programming, macros, and CAM automation across part families Perform hands-on machine setup and support first-run production during process development Optimize toolpaths, material removal rates, surface finishes, and production yields Train production personnel to ensure repeatability and smooth production transitions Manage CNC programs and setup data within PDM and DNC systems Act as a technical SME supporting lean initiatives, cycle time reduction, and quality improvements Research emerging manufacturing technologies and recommend productivity investments Qualifications — Needed Bachelor’s degree in Engineering preferred (or equivalent progressive hands-on experience) Minimum 5+ years of advanced manufacturing experience in precision or ultra-precision environments Expert-level knowledge of Fanuc controls Proven CNC programming experience with CAM software ESPRIT CAM experience preferred (Mastercam, PartMaker, SolidCAM acceptable; training provided) Strong background in tooling systems, workholding, and CNC machine setup Experience with advanced techniques such as on-machine probing and tool setters Familiarity with manufacturing enterprise systems; Epicor ERP experience a plus Ability to bridge engineering intent and shop-floor execution Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Not Specified
J
Quality Inspector
🏢 Jobot
Salary not disclosed
Join a precision-driven aerospace team! Hands-on Quality Inspector role with top-tier benefits and growth in East Hartford, CT.
This Jobot Job is hosted by: Jamie Beene Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.
Salary: $30
- $37 per hour A bit about us: We are a trusted aerospace precision manufacturer proudly serving industry leaders like GE Aviation, Pratt & Whitney, and Collins Aerospace.
Our East Hartford, CT plant is home to cutting-edge technology, a strong team culture, and a commitment to quality that has defined our success for decades.
Why join us? 100% on-site role at our East Hartford, CT (06108) facility Competitive PTO, paid holidays, and 401(k) match Medical, dental, and vision benefits starting day one Tuition reimbursement and career development support Stable, growing company with long-standing aerospace partnerships Job Details Job Details Perform full inspections including first-piece, in-process, and final inspections Measure and record dimensions using micrometers, calipers, gages, and digital equipment Review process certifications and ensure conformance to blueprints and specs Collaborate with internal teams to troubleshoot and resolve technical issues Support customer quality requirements and ensure documentation accuracy Requirements A.S.
degree in engineering/technical discipline or equivalent experience 5+ years of aerospace inspection experience Hands-on experience with GE Aviation and Raytheon (Collins/Pratt) customers Knowledge of FAI, PPAP, ECAV, and supplier portal submissions Familiar with DFAR, ITAR, and Flight Safety critical processes (ESA, VSE, SPS) Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
This Jobot Job is hosted by: Jamie Beene Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.
Salary: $30
- $37 per hour A bit about us: We are a trusted aerospace precision manufacturer proudly serving industry leaders like GE Aviation, Pratt & Whitney, and Collins Aerospace.
Our East Hartford, CT plant is home to cutting-edge technology, a strong team culture, and a commitment to quality that has defined our success for decades.
Why join us? 100% on-site role at our East Hartford, CT (06108) facility Competitive PTO, paid holidays, and 401(k) match Medical, dental, and vision benefits starting day one Tuition reimbursement and career development support Stable, growing company with long-standing aerospace partnerships Job Details Job Details Perform full inspections including first-piece, in-process, and final inspections Measure and record dimensions using micrometers, calipers, gages, and digital equipment Review process certifications and ensure conformance to blueprints and specs Collaborate with internal teams to troubleshoot and resolve technical issues Support customer quality requirements and ensure documentation accuracy Requirements A.S.
degree in engineering/technical discipline or equivalent experience 5+ years of aerospace inspection experience Hands-on experience with GE Aviation and Raytheon (Collins/Pratt) customers Knowledge of FAI, PPAP, ECAV, and supplier portal submissions Familiar with DFAR, ITAR, and Flight Safety critical processes (ESA, VSE, SPS) Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Not Specified
J
DQR Certified Quality Inspector
🏢 Jobot
Salary not disclosed
DQR-Certified Aerospace Quality Inspector (GE / Collins / Pratt) This Jobot Job is hosted by: Jamie Beene Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.
Salary: $33
- $38 per hour A bit about us: Founded nearly 80 years ago and based in East Hartford, Connecticut, we are a precision aerospace manufacturer supporting some of the most demanding OEM customers in the world.
With deep roots in advanced machining, quality excellence, and continuous improvement, we partner closely with leading aerospace and defense organizations to deliver mission-critical components that meet the highest performance and certification standards.
Why join us? Competitive Compensation: $38/hour top end (DOE) 401(k) with Company Match Comprehensive Benefits: Medical, Dental, Vision Paid Company Holidays & Competitive PTO Tuition Reimbursement & Professional Development Stability & Growth: Long-standing aerospace supplier with modern capabilities Onsite Role: Highly technical, hands-on inspection environment Job Details Key Responsibilities & Duties Perform full dimensional and visual inspections of aerospace components Conduct first piece, in-process, and final inspections Inspect and record dimensions per blueprints, process sheets, and inspection documentation Review process certifications and quality documentation Utilize micrometers, calipers, gauges, and advanced inspection equipment Support ECAV reports and customer submissions Interface with customers and internal teams to resolve quality or technical issues Maintain strict compliance with aerospace, customer, and export regulations Work independently while collaborating cross-functionally with engineering and production Qualifications — Needed Associate’s degree in engineering or technical discipline or equivalent hands-on experience Minimum 5+ years of aerospace inspection experience Active GE or Collins DQR certification (or ability to recertify) Direct experience supporting GE Aviation, Collins Aerospace, Pratt & Whitney, or similar OEMs Strong background in FAI, PPAP, and ECAV submissions Familiarity with customer supplier portals (GE Aviation, Raytheon Technologies) Experience with critical component processes (ESA, VSE, SPS) Strong IT skills related to digital gaging and quality systems Knowledge of ITAR and DFARS export compliance requirements Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Salary: $33
- $38 per hour A bit about us: Founded nearly 80 years ago and based in East Hartford, Connecticut, we are a precision aerospace manufacturer supporting some of the most demanding OEM customers in the world.
With deep roots in advanced machining, quality excellence, and continuous improvement, we partner closely with leading aerospace and defense organizations to deliver mission-critical components that meet the highest performance and certification standards.
Why join us? Competitive Compensation: $38/hour top end (DOE) 401(k) with Company Match Comprehensive Benefits: Medical, Dental, Vision Paid Company Holidays & Competitive PTO Tuition Reimbursement & Professional Development Stability & Growth: Long-standing aerospace supplier with modern capabilities Onsite Role: Highly technical, hands-on inspection environment Job Details Key Responsibilities & Duties Perform full dimensional and visual inspections of aerospace components Conduct first piece, in-process, and final inspections Inspect and record dimensions per blueprints, process sheets, and inspection documentation Review process certifications and quality documentation Utilize micrometers, calipers, gauges, and advanced inspection equipment Support ECAV reports and customer submissions Interface with customers and internal teams to resolve quality or technical issues Maintain strict compliance with aerospace, customer, and export regulations Work independently while collaborating cross-functionally with engineering and production Qualifications — Needed Associate’s degree in engineering or technical discipline or equivalent hands-on experience Minimum 5+ years of aerospace inspection experience Active GE or Collins DQR certification (or ability to recertify) Direct experience supporting GE Aviation, Collins Aerospace, Pratt & Whitney, or similar OEMs Strong background in FAI, PPAP, and ECAV submissions Familiarity with customer supplier portals (GE Aviation, Raytheon Technologies) Experience with critical component processes (ESA, VSE, SPS) Strong IT skills related to digital gaging and quality systems Knowledge of ITAR and DFARS export compliance requirements Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Not Specified
jobs by
✓ All jobs loaded