Engineering Jobs in Pleasant Hills

A leading metals manufacturing business serving the aerospace sector is seeking an experienced Director of Operations to lead its Pittsburgh facility. This is a high-profile operational leadership role with a clear path to a Vice President position.

As Director of Operations, you will:

• Lead a site of approximately 500 employees and drive a $250M P&L.
• Deliver operational excellence, improving efficiency, output, and overall site performance.
• Implement lean manufacturing and continuous improvement initiatives.
• Ensure compliance with all aerospace standards, regulatory requirements, and quality systems.
• Partner with commercial and program leadership to support growth within the aerospace sector.
• Build and develop a high-performing leadership team and future operational leaders.

Candidate Requirements

• Proven senior leadership experience in metals manufacturing serving the aerospace industry (required).
• Demonstrated success managing large-scale operations (~500 employees) with full P&L responsibility.
• Track record of driving efficiency, capacity growth, and operational performance improvements.
• Deep knowledge of aerospace manufacturing standards, quality systems, and regulatory frameworks.
• Inspirational leader with the ability to develop talent and drive cultural change.
• Bachelor’s degree in Engineering, Manufacturing, Operations Management, or related field; advanced degree preferred.

Why This Role

• Lead a strategically critical aerospace metals manufacturing site.
• Opportunity to transform operations, drive efficiency, and increase output.
• Clear succession path to Vice President level.
• Competitive executive compensation including bonus and long-term incentives.

This is an exceptional opportunity for a proven aerospace operations leader to make a measurable impact and take the next step toward executive leadership.

Construction Site Manager

Braddock, PA, 15104 Onsite

Pay range: $45-55/hr on W2

Electrical Construction Coordinator, Field Management; 40 hours to start; however when the project gets started it will be 60+

Years of Experience Required: 0-3 years

Job Description:

The Construction Manager (CM) is the project representative that have been delegated authority and responsibility of administering the field operations of the construction project. The CM will perform all aspects of field administration, including implementation of a safety plan and a quality control plan. The Construction Manager will be responsible for developing, evaluation of, and execution of construction plans for various projects as assigned. This will include significant outage planning and coordination with operating entities and contractors.

Job Responsibilities:

Function: The two primary functions of the Construction Manager is to perform evaluations of construction plans for safety, feasibility and efficiencies and to perform construction management for specific projects as assigned at the various Client locations.

Accountable for:

The Construction Manager will be responsible for the safety, cost and schedule performance of the construction efforts assigned. Deliverables: The deliverables required will vary based on the requirements unique to each assigned project, but will generally consist of:

1. Assist in the development of the progress schedule; generating, gathering, and confirming all information needed to create, monitor, and modify the progress schedule on a continuous basis. Monitor and report on actual vs. target performance requirements.

2. Perform constructability analyses on a regular basis and coordinate general direction of work.

3. Evaluate and provide input to vendor construction plans.

4. Manage receipt of material and equipment and ensure proper storage and accessibility.

5. Monitor manpower and physical progress of construction.

6. Monitor as required cost items related to the construction contracts ie. reimbursable costs to control spending. Review contractor progress payment requests. Review and provide final invoice approval.

7. Review, evaluate, resolve and report on contractor claims and disputes including maintaining change logs.

8. Coordinate and administer the construction quality assurance program.

9. Monitor and report on engineering and procurement function to ensure that deliverables are processed in time to meet construction commitments.

10. Prepare construction reports and maintain daily construction log. Maintain record drawing data, and prepares all regular and any special documentation as determined by project needs.

11. Conduct construction coordination meetings as required to progress the project in accordance with the schedule.

12. Coordinate storage and lay-down needs.

13. Assist in the obtainment of all necessary permits and licenses.

Job Requirements:

• Experience in coordinating and managing complex construction in an industrial setting - Direct steel industry construction experiences a plus.

• Knowledge and proficiency of Construction Industry Institute (CII) and Project Management Institute (PMI) concepts a plus.

• Knowledge of industry standards pertaining to industrial construction and safety planning.

• Experience with multi-discipline constructability and construction planning.

• Ability to use of Microsoft Excel, Word, PowerPoint, and Oracle software.

• Ability to read and evaluate schedules. • Ability to evaluate estimates and related scope documents. • Knowledge of engineering, procurement and construction and other project-related activities, their interfaces and interdependencies. This includes a broad knowledge of industry design standards, safety planning, basic construction techniques, equipment specifications, project control techniques including critical path scheduling, resource loading, cost control including earned value, and construction turnover to commissioning process.

• Ability to multitask in a multi-faceted work environment with different types of responsibilities

• Ability to develop outage plans and coordinate with the operating facility to integrate outage construction work with other co-located activities.

• Familiarity with a variety of contract types (lump sum, cost reimbursable, guarantee max, T&M). • Need to be able to understand scope, drawings, and specifications for QA and change control.

*** No 3rd parties accepted

*** Must work onsite Pittsburg, PA

The Enterprise Architect would perform a crucial role in shaping the bank’s technology landscape by defining and governing enterprise-wide architecture standards, frameworks, and roadmaps. This role is strategic focused to ensure that technology investments are aligned with business strategy, regulatory requirements, and digital transformation goals across consumer, commercial, and corporate banking. The ideal candidate would bring in-depth expertise in enterprise architecture (full stack application design, development, implementation, and support with hybrid deployment approach (on-premises and cloud-native)), stakeholder engagement, and banking technology modernization that is critical for successful running, maintaining of secure and robust technology stack.

Key Responsibilities:

Develop and maintain enterprise architecture blueprints across applications, data, infrastructure, and security domains.

• Partner with leader to define and implement the enterprise architecture vision, strategy, and operating model tailored to banking business lines.
• Define framework for architecture standards for responsive design, accessibility, and cross-platform compatibility
• Align technology strategy with business capabilities, regulatory obligations, and operational priorities.
• Establish and Lead architecture governance processes, including review boards, standards enforcement, and solution alignment.
• Collaborate with business and IT leaders to evaluate and prioritize technology initiatives.
• Define reference architectures and reusable patterns for cloud, API, integration, and data platforms.
• Evaluate emerging technologies (e.g., biometrics, AI/ML, real-time payments) for strategic fit and innovation potential.
• Support modernization of legacy systems and migration to cloud/hybrid environments.
• Ensure architectural compliance with banking regulations (e.g., GLBA, FFIEC, SOX, BCBS 239).
• Mentor solution architects and technical leads across business units.

Required:

Bachelor’s or Master’s degree in Computer Science, Engineering, Information Systems, or related field.

• 10+ years of experience in full stack development and enterprise architecture, with at least 3 years of experience in enterprise architecture or solution architecture strategy in digital banking or fintech.
• Strong understanding of banking domains including core banking, lending, payments, digital channels, and risk.
• Expertise in architecture frameworks (e.g., TOGAF, Zachman) and modeling languages (e.g., ArchiMate, UML).
• Experience with cloud platforms (AWS, Azure, GCP), hybrid environments, and API ecosystems.
• Familiarity with enterprise architecture tools (e.g., LeanIX, Ardoq, MEGA, Sparx EA).

Preferred:

TOGAF, Azure Architect, AWS Architect or equivalent certification.

• Experience in digital transformation, cloud migration, or core banking modernization.
• Exposure to AI/ML applications, enterprise risk, cybersecurity, and data governance programs.
• Familiarity with agile and DevSecOps practices in regulated environments.

• Ensure operation of machinery and mechanical equipment by completing preventive maintenance requirements on motors, conveyor systems, production and utility machines by following diagrams, sketches, operations manuals, manufacturer's instructions and engineering specifications.
• Provide emergency/unscheduled repairs of production equipment during production and perform scheduled maintenance repairs of production equipment as equipment is made available.
• Perform mechanic skills including, but not limited to, mechanical, electrical, pneumatic and hydraulic troubleshooting and repair of packaging, production and utility machines.
• Locate sources of problems by observing mechanical devices in operation, using precision measuring and testing instruments.
• Remove defective/damaged parts using items such as hoists, cranes, and hand and power tools.
• Adjust functional parts of machines and control instruments by using items such as hand tools, levels, plumb bobs, and straightedges.
• Fabricate repair parts by using machine shop instrumentation and equipment.
• Prepare and set up machinery for scheduled production runs as required.
• Work with and support Engineering during new projects and process improvement activities.
• Conserve maintenance resources by using equipment and supplies as needed to accomplish requisite tasks.
• Maintain continuity among work teams by documenting and communicating actions, issues and ongoing opportunities.
• Maintain safe and clean working environment by complying with procedures, rules and regulations.
• Ability to lift up to 50 lbs if required, and dexterity to allow looking inside of machinery, panels, overhead, and potentially awkward positions or locations to assess equipment.

• High school diploma or equivalent
• Technical, post high school training/schooling
• 7+ years of related experience, preferably in a manufacturing environment
• Food manufacturing experience preferred, but not required
• PLC experience, VFD experience highly preferred

• Warehouse & Production

• Ensure operation of machinery and mechanical equipment by completing preventive maintenance requirements on motors, conveyor systems, production and utility machines by following diagrams, sketches, operations manuals, manufacturer's instructions and engineering specifications.
• Provide emergency/unscheduled repairs of production equipment during production and perform scheduled maintenance repairs of production equipment as equipment is made available.
• Perform mechanic skills including, but not limited to, mechanical, electrical, pneumatic and hydraulic troubleshooting and repair of packaging, production and utility machines.
• Locate sources of problems by observing mechanical devices in operation, using precision measuring and testing instruments.
• Remove defective/damaged parts using items such as hoists, cranes, and hand and power tools.
• Adjust functional parts of machines and control instruments by using items such as hand tools, levels, plumb bobs, and straightedges.
• Fabricate repair parts by using machine shop instrumentation and equipment.
• Prepare and set up machinery for scheduled production runs as required.
• Work with and support Engineering during new projects and process improvement activities.
• Conserve maintenance resources by using equipment and supplies as needed to accomplish requisite tasks.
• Maintain continuity among work teams by documenting and communicating actions, issues and ongoing opportunities.
• Maintain safe and clean working environment by complying with procedures, rules and regulations.
• Ability to lift up to 50 lbs if required, and dexterity to allow looking inside of machinery, panels, overhead, and potentially awkward positions or locations to assess equipment.

• High school diploma or equivalent
• Technical, post high school training/schooling
• 7+ years of related experience, preferably in a manufacturing environment
• Food manufacturing experience preferred, but not required
• PLC experience, VFD experience highly preferred

• Warehouse & Production

• Ensure operation of machinery and mechanical equipment by completing preventive maintenance requirements on motors, conveyor systems, production and utility machines by following diagrams, sketches, operations manuals, manufacturer's instructions and engineering specifications.
• Provide emergency/unscheduled repairs of production equipment during production and perform scheduled maintenance repairs of production equipment as equipment is made available.
• Perform mechanic skills including, but not limited to, mechanical, electrical, pneumatic and hydraulic troubleshooting and repair of packaging, production and utility machines.
• Locate sources of problems by observing mechanical devices in operation, using precision measuring and testing instruments.
• Remove defective/damaged parts using items such as hoists, cranes, and hand and power tools.
• Adjust functional parts of machines and control instruments by using items such as hand tools, levels, plumb bobs, and straightedges.
• Fabricate repair parts by using machine shop instrumentation and equipment.
• Prepare and set up machinery for scheduled production runs as required.
• Work with and support Engineering during new projects and process improvement activities.
• Conserve maintenance resources by using equipment and supplies as needed to accomplish requisite tasks.
• Maintain continuity among work teams by documenting and communicating actions, issues and ongoing opportunities.
• Maintain safe and clean working environment by complying with procedures, rules and regulations.
• Ability to lift up to 50 lbs if required, and dexterity to allow looking inside of machinery, panels, overhead, and potentially awkward positions or locations to assess equipment.

• High school diploma or equivalent
• Technical, post high school training/schooling
• 7+ years of related experience, preferably in a manufacturing environment
• Food manufacturing experience preferred, but not required
• PLC experience, VFD experience highly preferred

• Warehouse & Production

• Ensure operation of machinery and mechanical equipment by completing preventive maintenance requirements on motors, conveyor systems, production and utility machines by following diagrams, sketches, operations manuals, manufacturer's instructions and engineering specifications.
• Provide emergency/unscheduled repairs of production equipment during production and perform scheduled maintenance repairs of production equipment as equipment is made available.
• Perform mechanic skills including, but not limited to, mechanical, electrical, pneumatic and hydraulic troubleshooting and repair of packaging, production and utility machines.
• Locate sources of problems by observing mechanical devices in operation, using precision measuring and testing instruments.
• Remove defective/damaged parts using items such as hoists, cranes, and hand and power tools.
• Adjust functional parts of machines and control instruments by using items such as hand tools, levels, plumb bobs, and straightedges.
• Fabricate repair parts by using machine shop instrumentation and equipment.
• Prepare and set up machinery for scheduled production runs as required.
• Work with and support Engineering during new projects and process improvement activities.
• Conserve maintenance resources by using equipment and supplies as needed to accomplish requisite tasks.
• Maintain continuity among work teams by documenting and communicating actions, issues and ongoing opportunities.
• Maintain safe and clean working environment by complying with procedures, rules and regulations.
• Ability to lift up to 50 lbs if required, and dexterity to allow looking inside of machinery, panels, overhead, and potentially awkward positions or locations to assess equipment.

• High school diploma or equivalent
• Technical, post high school training/schooling
• 7+ years of related experience, preferably in a manufacturing environment
• Food manufacturing experience preferred, but not required
• PLC experience, VFD experience highly preferred

• Warehouse & Production

The Senior Manufacturing Engineer is accountable for providing technical support for the assigned processes and equipment to operations. Ensure that processes and equipment meets expectations for performance and operational requirements. Validates that processes meet operational requirements and goals.

Responsibilities

• Be actively engaged with the manufacturing process and operations teams. Participate in the Daily Tier accountability meetings.
• Troubleshoot production process/technical problems in real time to deploy countermeasures. Work closely with the shift supervisor/s, other ME, IE, Lean Expert, Design, R&D, facilities/maintenance, and quality team members to gain cross functional feedback.
• Provide day-to-day technical floor support as a SME (Subject Matter Expert). Investigate and resolve issues which arise during the manufacturing while maintaining or exceeding safety, quality, productivity, and cost goals.
• Utilize various RCA (Root Cause Analysis) tools to correct the problems and prevent it from re-occurring. Analyze data to improve process capability, reduce process variation, and optimize process performance.
• Develop processes to improve the throughput using lean manufacturing methodologies. Lead continuous improvement projects in assigned process areas to reduce waste/scrap and cycle times.
• Design and construct tooling/fixtures for processes or modify existing production equipment as needed. Identify and develop relationship with external suppliers (tool and die shops) to upgrade tooling and fixtures.
• Select and integrate off-the-shelf component and equipment. Able to confirm system's and components' capabilities by designing test methods and procedures. Understanding of the hardware and physical system being controlled is necessary.
• Lead the project implementation by reviewing installation plans, coordinating start-ups, documenting changes, updating procedures, and training operators. Maintain project documentation and assist in creating Operation Manuals
• Assist in product design, material selections, and tooling reviews. Capability to select and integrate off-the-shelf component and equipment. Ownership of the Process Failure Modes and Effects Analysis (PFMEA) for assigned processes.
• Develop standardized Work Instructions and/or procedures for the assigned areas. Lead train the trainer sessions for assigned areas. Ensures production team knows about the proper operation of equipment through training, verification and process audits.
• Provide direction and coordinate efforts and responsibilities for interns and co-ops to best suit the needs of the business.
• Must be able to multitask and handle shifting priorities on short notices.
• Quality Support: Provides support during the customer or regulatory audits, Support ISO Re-implementation related activities, participate in the Change Management initiatives as needed.
• Support the Senior Manufacturing Engineering Manager in the Strategic Planning of the Short Term (1-3 years) and Long Term (3-5 years) Capital Spending Goals for the site.
• Assist the maintenance team in developing the Critical Spares of various process equipment in their area.
• Provide prompt support to the on-site team during troubleshooting/problem solving in presence or remotely to avoid the unplanned downtime and improve the OEE.
• Support the Senior Manufacturing Engineering Manager in the interview process of the new recruits and on-boarding the new manufacturing team members in the department.
• Other duties, responsibilities and activities as assigned at any time with or without notice

Knowledge, Skills, and Abilities

• Strong communication and documentation skills.
• Strong knowledge of automation skills (PLCs, SCADA, and Robotics)
• Statistical capability analysis skills.
• Proactive problem solver.
• Direct experience working in a manufacturing environment is required.
• Time management, organizational and multi-tasking skills necessary to work in a fast-paced environment, handling various tasks and changing priorities.
• High attention to detail and accuracy to achieve daily assignments and goals.
• Ability to analyze, review, and make recommendations.
• Strong verbal and written communication skills.
• Ability to make engineering judgment decisions.
• Elicits cooperation and influences others to drive business strategies, goals, and objectives.
• Demonstrated hands on problem solving utilizing good engineering principles.
• Knowledge of Six Sigma and Lean Manufacturing techniques.
• Experience with CAD software (AutoCAD, SOLIDWORKS, Creo, etc.)

Education and Experience

• Bachelor's degree in electrical engineering or other engineering disciplines with appropriate skills/experience or equivalent experience.
• Minimum of 8 years' experience.

Travel

• Local Travel
• Overnight/North America: Less than 10%

Working Conditions

• Office Environment - Must be able to remain in a stationary position 50% of the time and occasionally move about inside the office to access file cabinets, office machinery, etc. Required to have close visual acuity to perform an activity such as: preparing and analyzing data and figures; transcribing; viewing a computer terminal; extensive reading. May be required to exert up to 25 pounds of force occasionally to lift, carry, push, pull or otherwise move objects, including the human body.
• Factory - The worker may be subject to hazards. Includes a variety of physical conditions, such as proximity to moving mechanical parts, vibration, moving vehicles, electrical current, exposure to temperature changes or exposure to chemicals. While performing the duties of this job, the employee may be exposed to fumes, airborne particles, odors, dust, mists, and gases. The noise level in the work environment can be loud. Required to have close visual acuity to perform an activity such as: preparing and analyzing data and figures; transcribing; viewing a computer terminal; extensive reading; visual inspection involving small defects, small parts, and/or operation of machines (including inspection); using measurement devices; and/or assembly or fabrication parts at distances close to the eyes. Machinery operation requires the use of safety equipment to include but not limited to eye safety glasses, hearing protectors, work boots, and lab coats. May be required to exert up to 50 pounds of force occasionally to lift, carry, push, pull or otherwise move objects, including the human body.

About the Role

The Advanced Manufacturing Manager will lead the Advanced Manufacturing team to drive the development and integration of factory automation, manufacturing tooling and new technology to deliver results to achieve strategic goals to support manufacturing growth. This role will oversee the technical aspects of large-scale projects while leading a team of advanced manufacturing, controls, robotics and tooling engineers.

Responsibilities

• Build, lead, and mentor a high-performing advanced manufacturing team fostering a culture of continuous improvement and innovation
• Develop automation strategies that align with business long range strategic planning.
• Lead the design and execution of advanced manufacturing strategies to sustainably enhance productivity, reduce cost, and improve consistency of product quality leveraging leading edge industry 4.0 technology
• Participate in the assessment of integrator/supplier technical and commercial capabilities.
• Collaborate with quality, manufacturing, and engineering to identify and address systemic causes, implementing lasting solutions in processes and tools to prevent the recurrence of development issues.
• Maintain documentation, SOPs, and best practices for advanced process development, tool development, and knowledge transfer to manufacturing.
• Develop preferred methods/manufacturing systems in conjunction with manufacturing stakeholders.
• Collaborate with manufacturing plants and functions to align business objectives
• Own manufacturing technical readiness as a critical member of advanced manufacturing, with specific emphasis on manufacturing producibility, cost effectiveness, process repeatability; negotiate conflicting requirements, identify lessons-learned and DFM/DFA/DFSS opportunities and share/escalate to upstream product design engineers, supply chain and downstream manufacturing engineers.
• Manage the release of new equipment/process into manufacturing; drive manufacturing readiness; secure production at scale capacity, throughput, yield, and process capability before release to sustaining teams in the factory.
• Lead projects and technical teams from concept through deployment, ensuring performance requirements, timely delivery and ROI.

Education and Experience

• Bachelor’s degree in engineering (electrical, mechanical, industrial) or similar discipline required
• Minimum 10 years of applied professional experience leading and facilitating engineering initiatives in a manufacturing environment required, advanced manufacturing experience preferred
• Minimum 5 years of people management experience
• Demonstrated business acumen with an ability to understand and identify improvement opportunities that will provide financial benefit to the business
• Experience designing and deploying various automation and Industry 4.0 technologies
• Robotics experience, Fanuc preferred
• Plastic welding experience preferred
• A strong understanding of digital technologies, data analysis skills, agility and adaptability, a collaborative and team-oriented approach, fostering innovation.
• Strong communication skills, the ability to empower employees, and a focus on continuous learning/mentoring to navigate the rapidly changing landscape

Travel

• Overnight/North America: 10-25%

Working Conditions

• Office Environment - Must be able to remain in a stationary position 50% of the time and occasionally move about inside the office to access file cabinets, office machinery, etc. Required to have close visual acuity to perform an activity such as: preparing and analyzing data and figures; transcribing; viewing a computer terminal; extensive reading. May be required to exert up to 35 pounds of force occasionally to lift, carry, push, pull or otherwise move objects, including the human body.
• Factory - The worker may be subject to hazards. Includes a variety of physical conditions, such as proximity to moving mechanical parts, vibration, moving vehicles, electrical current, exposure to temperature changes or exposure to chemicals. While performing the duties of this job, the employee may be exposed to fumes, airborne particles, odors, dust, mists, and gases. The noise level in the work environment can be loud. Required to have close visual acuity to perform an activity such as: preparing and analyzing data and figures; transcribing; viewing a computer terminal; extensive reading; visual inspection involving small defects, small parts, and/or operation of machines (including inspection); using measurement devices; and/or assembly or fabrication parts at distances close to the eyes. Machinery operation requires the use of safety equipment to include but not limited to eye safety glasses, hearing protectors, work boots, and lab coats. May be required to exert up to 50 pounds of force occasionally to lift, carry, push, pull or otherwise move objects, including the human body.
• Customer/Partner Locations – Employee may visit customer or partner locations that may be comprised of office, manufacturing floor, laboratory environments and construction sites depending on the location and reason for visit.

The Senior Advanced Manufacturing Engineer will work with internal stakeholders and outside contractors to execute projects to support manufacturing scale up. This will require managing medium to large scale projects from concept, through capital funding planning and approval, and ultimately through successful implementation of automation and facility projects to meet the goals of the business.

Responsibilities

• Demonstrated ability to effectively work with suppliers, outside contractors and stakeholders and recommend development of best practices to improve assembly/manufacturing methods and procedures.
• Impacts the achievement of part design related to design for assembly/manufacturing, error proofing, fixture design, and incorporating quality monitoring and improvement measures to drive results.
• Works independently and as part of a team on complex projects.
• Collaborate with partner groups in development and review of manufacturing process for new products, design changes, or new manufacturing methods.
• Recommend, evaluate, and implement new technologies to improve efficiency or enhance flexibility of manufacturing operations with a focus on launch site capability.
• Partner with leadership, operations and engineering teams to ensure that new equipment projects align with the manufacturing strategy and build plans.
• Be accountable to deliver operability, reliability, and functional integrity of automated manufacturing equipment for handover to operations.
• Lead facility expansion efforts to support scaling of manufacturing sites, new and existing.

Education and Experience

• Bachelor's degree in engineering preferred
• Minimum of 10 years' experience
• Experience and understanding of complex automated manufacturing systems and components (electrical and pneumatic control, PLC and HMI devices, sensors, servo motors, vision systems, and robotics)
• Good understanding of supporting processes associated with the operations and maintenance of a production plant.
• Experience in manufacturing engineering and plant operations with direct experience in automated production processes, equipment support, and manufacturing best practices.
• Proficiency in use of AutoCAD

Travel

• Overnight/North America: Less than 10%

Working Conditions

• Office Environment - Must be able to remain in a stationary position 50% of the time and occasionally move about inside the office to access file cabinets, office machinery, etc. Required to have close visual acuity to perform an activity such as: preparing and analyzing data and figures; transcribing; viewing a computer terminal; extensive reading. May be required to exert up to 25 pounds of force occasionally to lift, carry, push, pull or otherwise move objects, including the human body.
• Factory - The worker may be subject to hazards. Includes a variety of physical conditions, such as proximity to moving mechanical parts, vibration, moving vehicles, electrical current, exposure to temperature changes or exposure to chemicals. While performing the duties of this job, the employee may be exposed to fumes, airborne particles, odors, dust, mists, and gases. The noise level in the work environment can be loud. Required to have close visual acuity to perform an activity such as: preparing and analyzing data and figures; transcribing; viewing a computer terminal; extensive reading; visual inspection involving small defects, small parts, and/or operation of machines (including inspection); using measurement devices; and/or assembly or fabrication parts at distances close to the eyes. Machinery operation requires the use of safety equipment to include but not limited to eye safety glasses, hearing protectors, work boots, and lab coats. May be required to exert up to 35 pounds of force occasionally to lift, carry, push, pull or otherwise move objects, including the human body.