Engineering Jobs in Pine Castle Florida Remote
333 positions found — Page 17
Nuclear Engineer
Salary not disclosed
Job Title : Nuclear Engineer (Naval Reactors Engineer) Category / Component : Officer • Active Overview Design, regulate, and oversee the Navy's nuclear propulsion program, including reactor design, fleet operations, and eventual defueling and decommissioning of nuclear powered ships and submarines from Naval Reactors Headquarters and associated Department of Energy laboratories and shipyards.
Key Responsibilities Provide technical direction in areas such as reactor and fluid systems design, reactor physics, materials development, component design for steam generators, pumps, and valves, instrumentation and control for reactor and propulsion plants, testing and quality control, radiation shielding, and chemistry and radiological controls; review designs and analyses from laboratories, shipyards, and industry partners; coordinate with fleet units to ensure safe and reliable nuclear plant operation.
What to Expect Assume significant technical responsibility early in your career as part of a lean headquarters staff; work primarily in an analytical and oversight role rather than operating plants at sea; balance long term engineering projects with time sensitive fleet and shipyard issues; frequent coordination with senior civilian engineers, naval officers, and technical teams; high expectations for attention to detail, judgment, and written and oral communication.
Work Environment Work mainly at Naval Reactors Headquarters in the Washington, District of Columbia area with regular engagement with Department of Energy laboratories, nuclear training sites, shipyards, and nuclear powered ships and submarines; office based work that includes document reviews, technical meetings, inspections, and site visits rather than day to day shipboard watchstanding.
Pathways, Training & Advancement Officer commissioning through programs such as Officer Candidate School or the Nuclear Propulsion Officer Candidate program followed by a structured technical qualification program at Naval Reactors; rotational exposure to laboratories, prototypes, shipyards, and fleet support issues; progressive responsibility leading projects and becoming a subject matter expert, with opportunities for professional military education and advanced graduate study in technical fields.
Entry through the Nuclear Propulsion Officer Candidate program for qualified college students and recent graduates, or selection via Officer Candidate School for those who already hold qualifying degrees; all applicants must meet Nuclear Propulsion Program academic and technical screening standards in addition to general officer commissioning requirements.
Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy.
Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter.
Additional qualifications for this job may include: Completion of a rigorous technical degree in engineering, physics, mathematics, or a closely related field that includes strong backgrounds in calculus and physics; outstanding academic record, particularly in technical coursework; United States citizenship and eligibility for a high level security clearance; strong technical aptitude and comfort with detailed analytical work.
Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities.
Specific options depend on the Sailor's status, training, and current Navy policy.
Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options.
Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance.
Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed.
Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source.
Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community.
It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes.
Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.
Not Specified
Assistant Project Manager
Salary not disclosed
Assistant Project Manager (Construction)
Location: Maitland Florida
Rate: $45/hr-$50/hr
Job Responsibilities:
- Adhere to clients safety programs, training, and policies as well as collaborate with the project team to manage the Safety & Health performance of project team members, contractors, and others as required.
- Collaborate with the Project Management team to build client relationships while interfacing with the client for proposal and project related items.
- Assist in the development of internal and external project risk reviews with the Project Management team and consult with the Legal Department as required.
- Coordinate and assist in the development and implementation of the Project Execution Plan, Quality Assurance Plan, Safety & Health Plan, Subcontracting Plan, Project Staffing Plan, Organization Chart, and Procurement Plan.
- Contribute to the negotiation, approval and execution of multiple types of prime contracts, subcontracts, purchase orders, and change orders.
- Develop the project plan for site mobilization and demobilization and support the Construction Manager or Site Manager with implementation.
- Secure applicable project permits required for the project.
- Support development of and coordinate the potential bidders' registration and pre-qualification efforts on behalf of the Project team.
- Prepare Request for Proposal (RFP), support detailed scope of work development, bid and selection process and creation of contract documents for the purpose of subcontractor and client contractor selection and award.
- Support the implementation of multiple project specifications, drawing releases, and design changes.
- Execute downstream contract administration, including Request for Information (RFI), submittals, meeting minutes, change management, and claims mitigation.
- Support project cost reporting, scheduling, work breakdown structures, project set-up and closeout, and field progress tracking processes.
- Prepare information for and report project status, risks, schedule, costs, and cash flows at project and corporate level meetings to internal and external stakeholders. Develop and distribute meeting minutes as needed.
- Support the Prime Contract, subcontract, client contractor, and supplier invoicing process.
- Establish, review and implement the project documentation and filing systems and processes.
- Verify the project, client contractor, and/or subcontractor's insurance, licensures, taxes/duties, and securities are in effect according to the project requirements.
- Support and conduct project safety, quality, progress and financial audits and assessments as required.
- Facilitate the materials receiving and management process including inventory control, receiving of goods, storage, and transportation.
- Collaborate with superintendents and site managers to verify compliance of subcontractors' and client contractors' contract documents, safety & health requirements, quality, and schedule.
- Facilitate the project turnover documentation, recordkeeping/retention, warranty and project close out processes.
- Assist with maintaining compliance on all project related activities by consistently applying company policies and procedures.
- Assist with the development of project labor agreements with building trades as required.
- All other duties as assigned.
Qualifications:
- Bachelor’s degree in construction management, Engineering, or a related field.
- Additional applicable experience may be substituted for the degree requirement.
- A minimum of 5 years relevant construction experience required.
- OSHA 10-hour certification strongly preferred.
- Excellent computer skills and proficiency in Microsoft Office (Word, Excel, Outlook, PowerPoint and Access).
- Experience with document control, scheduling, cost control and project management software is preferred.
- Excellent written and verbal communication skills and strong organizational skills.
- Strong analytical and problem-solving skills, and attention to detail.
- Ability to handle large volumes of work and multi-task in a fast-paced environment.
EEO Statement:
Brooksource is an equal opportunity employer that does not discriminate on the
basis of actual or perceived race, color, creed, religion, national origin, ancestry,
citizenship status, age, sex or gender (including pregnancy, childbirth, lactation
and related medical conditions), gender identity or gender expression, sexual
orientation, marital status, military service and veteran status, physical or mental
disability, protected medical condition as defined by applicable state or local law,
genetic information, or any other characteristic protected by applicable federal,
state, or local laws and ordinances.
Benefits & Perks:
Brooksource offers competitive medical, dental, vision, Health
Savings Account, Dependent Care FSA, and supplemental coverage with plans that
can fit each employee’s needs. We offer a 401k plan that includes a company
match and is fully vested after you become eligible, paid time off, sick time, and
paid company holidays. We also offer an Employee Assistance Program (EAP) that
provides services like virtual counseling, financial services, legal services, life
coaching, etc.
Pay Disclaimer:
The pay range for this job level is a general guideline only and not a guarantee of
compensation or salary. Additional factors considered in extending an offer
include (but are not limited to) responsibilities of the job, education, experience,
knowledge, skills, and abilities, as well as internal equity, alignment with market
data, applicable bargaining agreement (if any), or other law.
Not Specified
B
Manufacturing Engineering Aide,
Salary not disclosed
Manufacturing Engineering Aide Location: Orlando, FL Job ID: #72217 Pay Range: $25-29 (based on education and experience) Duration: 15 months Responsibilities Collaborate with Manufacturing Engineers (ME) on various technical tasks, providing crucial support in gathering, maintaining, formatting, compiling, and manipulating technical data, such as engineering designs and design changes.
Produce high-quality engineering documentation, reports, marking files, designs, drawings (flow charts, block diagrams, and schematics), and machine operation procedures, ensuring accuracy and attention to detail.
Act as a key liaison between the ME and production teams, assisting in providing technical guidance and timely problem resolution to support assembly performance.
Review, respond to, and adjudicate EODIs and requests for floor support, working closely with the assembly team to identify and correct issues firsthand.
Update assembly work instructions based on drawings and/or models, reviewing content with Manufacturing Engineers prior to release to the floor.
Assist in working ME's tasks on Qnotes and EODIs, inputting data provided by ME to tools in support of planning, routing, work instruction generation, status reporting, and issue resolution.
Actively engage in PMT (Performance Management Team) and assist in implementing lean principles and technologies and other process improvement activities, ensuring continuous growth and improvement.
Maintain and control shop aids used in the production process, programming and maintaining assembly-related machines as required for their respective areas.
Work closely with the Wire Cut area to provide assistance with machine set-up and support, troubleshoot issues, optimize machine performance, and implement process improvements to enhance overall productivity and quality.
Basic Qualifications : Minimum 3-5 years of experience in a manufacturing role.
Collaborate in the creation manufacturing engineer instructions and visuals High School diploma, or equivalent experience/combined education, with additional technical training sufficient enough to perform required basic calculations, electronic/mechanical assembly, computer operations, etc.
Ability to read and understand engineering design drawings and interpret design specifications and their applicability to manufacturing.
Microsoft Office suite experience with MS Word, PowerPoint, Excel, and Publisher Ability to work in a fast-paced environment, with multiple priorities and deadlines.
Excellent verbal/written communications skills Ability to provide technical guidance and timely problem resolution to production floor operators Familiarity with cable and/or harnesses production, and has the ability to analyze electrical and mechanical schematics and diagrams IPC/WHMA-A-620 and J-STD-001 trained and/or certified Familiarity with mechanical, power, and pneumatic tools Familiarity with cable wire cutter and stripper machines Desired skills : Familiarity with SAP (Qnotes, Routings, Bills of material) or a related manufacturing system Knowledge of Lean manufacturing concepts and technique and experience generating/implementing process improvements Must have strong interpersonal skills and be able to work effectively in a team environment.
Benefits provided: 401K, medical, dental, and vision, sick time as applicable to state law Butler America Aerospace, LLC.
is an equal opportunity employer.
Butler evaluates applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information and other legally protected characteristics.
The Butler America Aerospace, LLC.
EEO Policy Statement and "Know Your Rights" Poster is available here: Applicant and Employee Notices .
Butler America Aerospace, LLC.
is committed to working with and providing reasonable accommodations to individuals with disabilities.
If you need a reasonable accommodation because of a disability for any part of the employment process, please contact the Human Resources Department at
Produce high-quality engineering documentation, reports, marking files, designs, drawings (flow charts, block diagrams, and schematics), and machine operation procedures, ensuring accuracy and attention to detail.
Act as a key liaison between the ME and production teams, assisting in providing technical guidance and timely problem resolution to support assembly performance.
Review, respond to, and adjudicate EODIs and requests for floor support, working closely with the assembly team to identify and correct issues firsthand.
Update assembly work instructions based on drawings and/or models, reviewing content with Manufacturing Engineers prior to release to the floor.
Assist in working ME's tasks on Qnotes and EODIs, inputting data provided by ME to tools in support of planning, routing, work instruction generation, status reporting, and issue resolution.
Actively engage in PMT (Performance Management Team) and assist in implementing lean principles and technologies and other process improvement activities, ensuring continuous growth and improvement.
Maintain and control shop aids used in the production process, programming and maintaining assembly-related machines as required for their respective areas.
Work closely with the Wire Cut area to provide assistance with machine set-up and support, troubleshoot issues, optimize machine performance, and implement process improvements to enhance overall productivity and quality.
Basic Qualifications : Minimum 3-5 years of experience in a manufacturing role.
Collaborate in the creation manufacturing engineer instructions and visuals High School diploma, or equivalent experience/combined education, with additional technical training sufficient enough to perform required basic calculations, electronic/mechanical assembly, computer operations, etc.
Ability to read and understand engineering design drawings and interpret design specifications and their applicability to manufacturing.
Microsoft Office suite experience with MS Word, PowerPoint, Excel, and Publisher Ability to work in a fast-paced environment, with multiple priorities and deadlines.
Excellent verbal/written communications skills Ability to provide technical guidance and timely problem resolution to production floor operators Familiarity with cable and/or harnesses production, and has the ability to analyze electrical and mechanical schematics and diagrams IPC/WHMA-A-620 and J-STD-001 trained and/or certified Familiarity with mechanical, power, and pneumatic tools Familiarity with cable wire cutter and stripper machines Desired skills : Familiarity with SAP (Qnotes, Routings, Bills of material) or a related manufacturing system Knowledge of Lean manufacturing concepts and technique and experience generating/implementing process improvements Must have strong interpersonal skills and be able to work effectively in a team environment.
Benefits provided: 401K, medical, dental, and vision, sick time as applicable to state law Butler America Aerospace, LLC.
is an equal opportunity employer.
Butler evaluates applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information and other legally protected characteristics.
The Butler America Aerospace, LLC.
EEO Policy Statement and "Know Your Rights" Poster is available here: Applicant and Employee Notices .
Butler America Aerospace, LLC.
is committed to working with and providing reasonable accommodations to individuals with disabilities.
If you need a reasonable accommodation because of a disability for any part of the employment process, please contact the Human Resources Department at
Not Specified
B
Design Engineer
🏢 Butler Aerospace and Defense
Salary not disclosed
Design Engineer Location: Orlando, FL Job ID: #72224 Duration: 12 months contract Pay Range: $56-65
- W2 hourly Active Secret clearance required to start.
Job Description: Designs components or portions of systems and modifies existing designs to develop or improve products and facilitate manufacturing operations.
Utilizes computer-aided design equipment and/or graphic tools such as, CAD, CAM or CATIA.
Gathers information, makes studies, computes calculations, and prepares original rough layouts, sketches to present design proposal.
Coordinates design criteria with engineering, manufacturing, tooling, material, and planning group such as ease of manufacture, availability of materials, and contractual specifications.
Works under general supervision, receiving instructions for routine tasks and detailed guidance for new assignments.
Performs activities following standard procedures.
May operate standard equipment for product development, testing, or data processing.
Required Experience: Candidates must have at least 4 years of experience with CAD design, specifically CREO Candidates must have at least 4 years of experience with the creation and understand of engineering drawings Candidates must have at least 4 years of experience with BOM (Bill of Materials) Candidates must have at least 4 years of experience with GD&T Benefits provided: 401K, medical, dental, and vision, sick time as applicable to state law.
Butler America Aerospace, LLC.
is an equal opportunity employer.
Butler evaluates applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information and other legally protected characteristics.
The Butler America Aerospace, LLC.
EEO Policy Statement and "Know Your Rights" Poster is available here: Applicant and Employee Notices .
Butler America Aerospace, LLC.
is committed to working with and providing reasonable accommodations to individuals with disabilities.
If you need a reasonable accommodation because of a disability for any part of the employment process, please contact the Human Resources Department at
- W2 hourly Active Secret clearance required to start.
Job Description: Designs components or portions of systems and modifies existing designs to develop or improve products and facilitate manufacturing operations.
Utilizes computer-aided design equipment and/or graphic tools such as, CAD, CAM or CATIA.
Gathers information, makes studies, computes calculations, and prepares original rough layouts, sketches to present design proposal.
Coordinates design criteria with engineering, manufacturing, tooling, material, and planning group such as ease of manufacture, availability of materials, and contractual specifications.
Works under general supervision, receiving instructions for routine tasks and detailed guidance for new assignments.
Performs activities following standard procedures.
May operate standard equipment for product development, testing, or data processing.
Required Experience: Candidates must have at least 4 years of experience with CAD design, specifically CREO Candidates must have at least 4 years of experience with the creation and understand of engineering drawings Candidates must have at least 4 years of experience with BOM (Bill of Materials) Candidates must have at least 4 years of experience with GD&T Benefits provided: 401K, medical, dental, and vision, sick time as applicable to state law.
Butler America Aerospace, LLC.
is an equal opportunity employer.
Butler evaluates applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information and other legally protected characteristics.
The Butler America Aerospace, LLC.
EEO Policy Statement and "Know Your Rights" Poster is available here: Applicant and Employee Notices .
Butler America Aerospace, LLC.
is committed to working with and providing reasonable accommodations to individuals with disabilities.
If you need a reasonable accommodation because of a disability for any part of the employment process, please contact the Human Resources Department at
Not Specified
J
Sales Associate / Customer Service Representative
🏢 Jobot
Salary not disclosed
Customer Service Representative, Fishing and Boat Expert, Ocoee, FL, reply to /> This Jobot Job is hosted by: David Hyon Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.
Salary: $20
- $25 per hour A bit about us: We are a manufacturer specializing in Boat and Fishing Equipment.
Why join us? Medical and Dental insurance contributions 401k with company contributions Life Insurance Paid time off Job Details Customer Service/Sales Associate responsible for customer service as well as complex project helping the design of custom boat panel and tackle storage.
Responsibilities • Assess customer needs and provide assistance and information on product features.
• Interpret customer requirements, identify engineering challenges and act as a liaison between customer and engineering • Proactively manage customer projects to facilitate sales • Maintain a balance between company policy and customer benefit in decision making Minimum Requirements: • Excellent communication and interpersonal skills • General interest in boats & boating accessories (extensive boating experience preferred) • Bachelor’s degree in relevant field of study or equivalent years of related work experience.
• Enthusiastic, friendly and energetic with a genuine desire to provide outstanding service Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Salary: $20
- $25 per hour A bit about us: We are a manufacturer specializing in Boat and Fishing Equipment.
Why join us? Medical and Dental insurance contributions 401k with company contributions Life Insurance Paid time off Job Details Customer Service/Sales Associate responsible for customer service as well as complex project helping the design of custom boat panel and tackle storage.
Responsibilities • Assess customer needs and provide assistance and information on product features.
• Interpret customer requirements, identify engineering challenges and act as a liaison between customer and engineering • Proactively manage customer projects to facilitate sales • Maintain a balance between company policy and customer benefit in decision making Minimum Requirements: • Excellent communication and interpersonal skills • General interest in boats & boating accessories (extensive boating experience preferred) • Bachelor’s degree in relevant field of study or equivalent years of related work experience.
• Enthusiastic, friendly and energetic with a genuine desire to provide outstanding service Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Not Specified
Principal Mechanical Integration Engineer – DCI Pipes, Frames and Structures (REMOTE) (AUSTIN)
Salary not disclosed
Job Title: Principal Mechanical Design Engineer
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
temporary
Senior Mechanical Systems Engineer - Remote Structures and Piping (AUSTIN)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Mechanical Design Engineer
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
temporary
Test Development Manager - Supports Hybrid Work Schedule (WASHINGTON)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
**This position supports hybrid work schedule depending on organization needs.**
About Jabil:
Jabil is a leading product solutions provider offering end-to-end design, manufacturing, supply chain, and product management services. With operations in over 100 facilities across 30 countries, Jabil delivers innovative, integrated, and customized solutions to clients across diverse industries—including automotive, consumer lifestyle and wearables, defense and aerospace, smart home and building, industrial and energy, enterprise and infrastructure, healthcare, mobility, packaging, and printing.
JOB SUMMARY
Jabil is seeking a Manufacturing Test Development who will directly contribute to the transformative growth within our Enterprise and Intelligent Infrastructure division by applying unique and innovative approaches to solving problems within a large-scale software production environment. You and your team will be responsible for contributing to the end-to-end architecture, definition, development and production deployment of production software applications and infrastructure spanning multiple customers and manufacturing regions. You will also be responsible for interfacing with internal engineering, manufacturing and quality teams and our end customers to ensure your software deliverables meet the rigorous standards of Jabil’s world-class manufacturing environments.
ESSENTIAL DUTIES AND RESPONSIBILITIES
LEADERSHIP AND MANAGEMENT RESPONSIBILITIES
- People manager for a team of software developers and product engineers in support of global cloud operations.
- Attract, hire, onboard, lead, coach, mentor and inspire your team to deliver the best in class for our customers and employees
- Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines).
- Solicit ongoing self and team feedback from the business unit (BU), customer and team members.
- Perform team member evaluations professionally and on time.
- Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals.
- Coordinate activities of team and keep them focused in times of crises.
- Ensure recognition and rewards are managed fairly and consistently in area of responsibility.
FUNCTIONAL MANAGEMENT RESPONSIBILITIES
- Plan and formulate aspects of Customer BU projects such as objective or purpose of project, applications that can be utilized from findings, costs of project, and equipment and human resource requirements, technical requirements.
- Provide direction on design and development activities to improve, modify or design new equipment products and processes.
- Oversee key projects, processes and performance reports, data, and analysis.
- Develop, determine, and implement policies, procedures and programs.
- Analyze technology trends, human resources needs and market demand to plan projects.
- Oversee definition and collaboration on overall test infrastructure and application architectures.
- Creation of behavioral and high-level software design specifications.
- Development of production infrastructure and related application code.
- Lead and participate in peer/code reviews.
- Contribute and improve software build methodology, procedures, and environment.
- Operational and development support for the software and test infrastructure at production facilities
MANAGEMENT & SUPERVISORY RESPONSIBILITIES
- Reports to Management
JOB QUALIFICATIONS AND KNOWLEDGE REQUIREMENTS
- Knowledge of professional software engineering practices for the complete software development life cycle, including coding standards, code reviews, source control management, build processes, testing, and operations.
- Agile, CICD, and SLDC process implementation and application experience.
- Knowledge/Expertise in the following programming/scripting languages: Python, BASH, Java experience a plus.
- Linux development experience with a solid understanding of its fundamentals and internals: Ubuntu/ CentOS
- Well-versed in the following container/virtualization environments: VMware, Docker.
- Solid understanding of large-scale distributed systems in practice, including multi-tier architectures, application security, monitoring and storage systems.
- Experience with front-end and back-end Web UI design.
- Experience with common web APIs (REST, XML-RPC).
- Experience with hardware and API solutions for controlling, managing and stressing L10 devices (servers, network and storage SSDs, NVMe): IPMI, Redfish, mprime, FIO, Linpack, ptugen, memtester
- Experience in the creation and configuration(DHCP, PXE boot, nginx) of Virtual Machines (VMs), VMWare preferred.
- Experience with leading edge networking systems, hardware, software and protocols including but not limited to enterprise ethernet datacenter switching/routing L1, L2, and L3 (BGP, DHCP Relay, ECMP). Arista CloudVision is a plus
- Experience with code versioning tools (Git preferred)
- Experience with front-end and back-end Web UI design.
- Experience with common web APIs (REST, XML-RPC).
EDUCATION & EXPERIENCE REQUIREMENTS
- BS degree in Electrical/Computer Engineering, Computer Science, or related field. MS preferred.
- 10+ years’ experience in a software development/test capacity with enterprise server, storage, or networking products. 3+ years people management experience.
- Excellent verbal and written communication skills.
- Prior experience directly managing software development teams
- Experience managing remote, multi-national and geographically dispersed development teams.
- Domestic and/or International travel, up to 25%, may be required.
Remote working/work at home options are available for this role.
About Jabil:
Jabil is a leading product solutions provider offering end-to-end design, manufacturing, supply chain, and product management services. With operations in over 100 facilities across 30 countries, Jabil delivers innovative, integrated, and customized solutions to clients across diverse industries—including automotive, consumer lifestyle and wearables, defense and aerospace, smart home and building, industrial and energy, enterprise and infrastructure, healthcare, mobility, packaging, and printing.
JOB SUMMARY
Jabil is seeking a Manufacturing Test Development who will directly contribute to the transformative growth within our Enterprise and Intelligent Infrastructure division by applying unique and innovative approaches to solving problems within a large-scale software production environment. You and your team will be responsible for contributing to the end-to-end architecture, definition, development and production deployment of production software applications and infrastructure spanning multiple customers and manufacturing regions. You will also be responsible for interfacing with internal engineering, manufacturing and quality teams and our end customers to ensure your software deliverables meet the rigorous standards of Jabil’s world-class manufacturing environments.
ESSENTIAL DUTIES AND RESPONSIBILITIES
LEADERSHIP AND MANAGEMENT RESPONSIBILITIES
- People manager for a team of software developers and product engineers in support of global cloud operations.
- Attract, hire, onboard, lead, coach, mentor and inspire your team to deliver the best in class for our customers and employees
- Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines).
- Solicit ongoing self and team feedback from the business unit (BU), customer and team members.
- Perform team member evaluations professionally and on time.
- Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals.
- Coordinate activities of team and keep them focused in times of crises.
- Ensure recognition and rewards are managed fairly and consistently in area of responsibility.
FUNCTIONAL MANAGEMENT RESPONSIBILITIES
- Plan and formulate aspects of Customer BU projects such as objective or purpose of project, applications that can be utilized from findings, costs of project, and equipment and human resource requirements, technical requirements.
- Provide direction on design and development activities to improve, modify or design new equipment products and processes.
- Oversee key projects, processes and performance reports, data, and analysis.
- Develop, determine, and implement policies, procedures and programs.
- Analyze technology trends, human resources needs and market demand to plan projects.
- Oversee definition and collaboration on overall test infrastructure and application architectures.
- Creation of behavioral and high-level software design specifications.
- Development of production infrastructure and related application code.
- Lead and participate in peer/code reviews.
- Contribute and improve software build methodology, procedures, and environment.
- Operational and development support for the software and test infrastructure at production facilities
MANAGEMENT & SUPERVISORY RESPONSIBILITIES
- Reports to Management
JOB QUALIFICATIONS AND KNOWLEDGE REQUIREMENTS
- Knowledge of professional software engineering practices for the complete software development life cycle, including coding standards, code reviews, source control management, build processes, testing, and operations.
- Agile, CICD, and SLDC process implementation and application experience.
- Knowledge/Expertise in the following programming/scripting languages: Python, BASH, Java experience a plus.
- Linux development experience with a solid understanding of its fundamentals and internals: Ubuntu/ CentOS
- Well-versed in the following container/virtualization environments: VMware, Docker.
- Solid understanding of large-scale distributed systems in practice, including multi-tier architectures, application security, monitoring and storage systems.
- Experience with front-end and back-end Web UI design.
- Experience with common web APIs (REST, XML-RPC).
- Experience with hardware and API solutions for controlling, managing and stressing L10 devices (servers, network and storage SSDs, NVMe): IPMI, Redfish, mprime, FIO, Linpack, ptugen, memtester
- Experience in the creation and configuration(DHCP, PXE boot, nginx) of Virtual Machines (VMs), VMWare preferred.
- Experience with leading edge networking systems, hardware, software and protocols including but not limited to enterprise ethernet datacenter switching/routing L1, L2, and L3 (BGP, DHCP Relay, ECMP). Arista CloudVision is a plus
- Experience with code versioning tools (Git preferred)
- Experience with front-end and back-end Web UI design.
- Experience with common web APIs (REST, XML-RPC).
EDUCATION & EXPERIENCE REQUIREMENTS
- BS degree in Electrical/Computer Engineering, Computer Science, or related field. MS preferred.
- 10+ years’ experience in a software development/test capacity with enterprise server, storage, or networking products. 3+ years people management experience.
- Excellent verbal and written communication skills.
- Prior experience directly managing software development teams
- Experience managing remote, multi-national and geographically dispersed development teams.
- Domestic and/or International travel, up to 25%, may be required.
Remote working/work at home options are available for this role.
temporary
DCI Test Development Engineer - Hybrid Work Flexibility in Austin, TX (AUSTIN)
🏢 JABIL CIRCUIT, INC
$105,100 - 189,200
Build your career with Jabil! We challenge and empower you to make most of your talents, working with outstanding colleagues from diverse backgrounds who share your drive and passion to make Jabil grow!
Location/Division Specific Information – Austin, TX / USA - Remote
**This position supports hybrid work schedule depending on organization needs.**
How will you make an impact? –
Jabil is seeking a DCI Test Development Engineer who will directly contribute to the transformative growth within our Enterprise and Infrastructure division by applying unique and innovative approaches to solving problems within a large-scale software and data center infrastructure. The DCI Test Development Engineer plays a vital role in ensuring the quality and reliability of hardware products, contributing to the overall success of the manufacturing process and customer satisfaction. You will be responsible for contributing to the end-to-end architecture, definition, development and production deployment of production software applications and data center infrastructure spanning multiple customers and manufacturing regions. You will also be responsible for interfacing with internal engineering, manufacturing and quality teams and our end customers to ensure your software deliverables meet the rigorous standards of Jabil’s world-class manufacturing environments.
What will you do?
- Test System Development: Design and develop test systems and procedures for manufacturing processes. This includes creating test plans, test cases, and test scripts to assess the functionality and performance of hardware.
- Develop and implement automated manufacturing test sequences in Python that interface with BMS and PLC hardware to validate the functional performance, communication protocols, and safety logic of liquid cooling equipment.
- Test Software Development: Create, validate, release, and maintain test software and scripts that automate the testing process. This software may include code for controlling test equipment, collecting and analyzing data, and generating test reports.
- Test Sustaining: Support and maintenance for the manufacturing server (L10) and rack (L11) level test software and infrastructure deployed at our production facilities, including the implementation of minor system configuration changes (new IPNs)
- Documentation: Maintain comprehensive documentation of test procedures, specifications, and Infrastructure
- Collaboration: Work closely with cross-functional teams, including hardware engineers, manufacturing engineers, controls engineer, and quality assurance personnel, to ensure alignment on testing requirements and quality standards
- Continuous Learning: Stay updated on the latest advancements in testing technologies, methodologies, and industry best practices to keep manufacturing processes competitive and up to date
- Definition and collaboration on overall test infrastructure and application architectures
How will you get here?
Education:
- BS degree in Electrical/Computer Engineering, Computer Science or related field is required
Experience:
- 5-8 years’ experience in a software manufacturing test development/sustaining with enterprise server, storage or networking products is required
- 10+ years of relevant experience in a software manufacturing test development/ sustaining with enterprise server, storage or networking products and some college coursework in lieu of a 4- yr. degree, will be considered
- Excellent verbal and written communication skills is required
Knowledge, Skills, Abilities:
- Expertise in the following programming/scripting languages: Python, Java, BASH. C, C++, experience a plus
- Linux development expertise with a solid understanding of its fundamentals: CentOS/Ubuntu
- Python for hardware automation, with a deep understanding of industrial communication protocols (Modbus, BACnet, or Ethernet/IP) and the ability to interpret P&IDs and electrical schematics for cooling systems; experience in designing physical test stations and sensor integration is highly preferred.
- Expertise in the creation and configuration (DHCP, PXE boot, nginx) of Virtual Machines (VMs) using VMWare
- Expertise with leading edge networking systems, hardware, software and protocols including but not limited to enterprise ethernet datacenter switching/routing L1, L2, and L3 (BGP, DHCP Relay, ECMP). Arista CloudVision is a plus
- Experience with code versioning tools (Git preferred)
- Strong knowledge of professional software engineering practices for the complete software development life cycle, including coding standards, code reviews, source control management, build processes, testing, and operations
- Ability to travel up to 10% globally as required
Remote working/work at home options are available for this role.
Location/Division Specific Information – Austin, TX / USA - Remote
**This position supports hybrid work schedule depending on organization needs.**
How will you make an impact? –
Jabil is seeking a DCI Test Development Engineer who will directly contribute to the transformative growth within our Enterprise and Infrastructure division by applying unique and innovative approaches to solving problems within a large-scale software and data center infrastructure. The DCI Test Development Engineer plays a vital role in ensuring the quality and reliability of hardware products, contributing to the overall success of the manufacturing process and customer satisfaction. You will be responsible for contributing to the end-to-end architecture, definition, development and production deployment of production software applications and data center infrastructure spanning multiple customers and manufacturing regions. You will also be responsible for interfacing with internal engineering, manufacturing and quality teams and our end customers to ensure your software deliverables meet the rigorous standards of Jabil’s world-class manufacturing environments.
What will you do?
- Test System Development: Design and develop test systems and procedures for manufacturing processes. This includes creating test plans, test cases, and test scripts to assess the functionality and performance of hardware.
- Develop and implement automated manufacturing test sequences in Python that interface with BMS and PLC hardware to validate the functional performance, communication protocols, and safety logic of liquid cooling equipment.
- Test Software Development: Create, validate, release, and maintain test software and scripts that automate the testing process. This software may include code for controlling test equipment, collecting and analyzing data, and generating test reports.
- Test Sustaining: Support and maintenance for the manufacturing server (L10) and rack (L11) level test software and infrastructure deployed at our production facilities, including the implementation of minor system configuration changes (new IPNs)
- Documentation: Maintain comprehensive documentation of test procedures, specifications, and Infrastructure
- Collaboration: Work closely with cross-functional teams, including hardware engineers, manufacturing engineers, controls engineer, and quality assurance personnel, to ensure alignment on testing requirements and quality standards
- Continuous Learning: Stay updated on the latest advancements in testing technologies, methodologies, and industry best practices to keep manufacturing processes competitive and up to date
- Definition and collaboration on overall test infrastructure and application architectures
How will you get here?
Education:
- BS degree in Electrical/Computer Engineering, Computer Science or related field is required
Experience:
- 5-8 years’ experience in a software manufacturing test development/sustaining with enterprise server, storage or networking products is required
- 10+ years of relevant experience in a software manufacturing test development/ sustaining with enterprise server, storage or networking products and some college coursework in lieu of a 4- yr. degree, will be considered
- Excellent verbal and written communication skills is required
Knowledge, Skills, Abilities:
- Expertise in the following programming/scripting languages: Python, Java, BASH. C, C++, experience a plus
- Linux development expertise with a solid understanding of its fundamentals: CentOS/Ubuntu
- Python for hardware automation, with a deep understanding of industrial communication protocols (Modbus, BACnet, or Ethernet/IP) and the ability to interpret P&IDs and electrical schematics for cooling systems; experience in designing physical test stations and sensor integration is highly preferred.
- Expertise in the creation and configuration (DHCP, PXE boot, nginx) of Virtual Machines (VMs) using VMWare
- Expertise with leading edge networking systems, hardware, software and protocols including but not limited to enterprise ethernet datacenter switching/routing L1, L2, and L3 (BGP, DHCP Relay, ECMP). Arista CloudVision is a plus
- Experience with code versioning tools (Git preferred)
- Strong knowledge of professional software engineering practices for the complete software development life cycle, including coding standards, code reviews, source control management, build processes, testing, and operations
- Ability to travel up to 10% globally as required
Remote working/work at home options are available for this role.
temporary
Lead Electrical CAD Designer – Data Center Infrastructure (REMOTE) - Flexible Remote Work with Occasional Travel (WASHINGTON)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Lead Electrical CAD Designer
Job Family: General Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Lead Electrical CAD Designer will be responsible for creating detailed model designs, modifying existing designs, and working collaboratively with engineers and other team members to meet product specifications. The ideal candidate has in-depth knowledge of various electrical design tools, is detail-oriented, and can effectively communicate design ideas. A strong understanding of Electrical design principles, manufacturing processes, power distribution, automation control (PLC), and electronic device parts are critical. This role will involve selecting key components, developing detailed drawings for control panels, power distribution systems, electrical wiring, and transitioning design to manufacturing.
What will you do?
- Creating 2D and 3D models of electrical systems, particularly for complex projects or when visualization is needed
- Participating in design reviews to ensure accuracy and compliance with requirements
- Advanced proficiency in various CAD software, such as AutoCAD Electrical, Revit, Windchill, Autodesk Inventor-EMX, Autodesk Fusion, to design, draft, and model complex electrical for power system and automation control
- Strong understanding of electrical symbols, power systems and automation control with the concepts to accurately create designs that meet technical specifications and standards
- Work closely with engineers and other designers to meet product specifications and performance requirements
- Modify and revise designs to correct operating deficiencies or to reduce production problems
- Prepare and revise engineering drawings, schematics, BOMs, and layouts as required.
- Check and validate designs to ensure they meet required quality and safety standards
- Excellent attention to detail for ensuring the accuracy of measurements, dimensions, and design specifications
- Strong analytical skills for interpreting complex technical drawings, single line diagram, wiring diagram, schematic, power plan, automation control, ladder diagram, and electrical device specifications
- Designing and creating schematic PLC input/output connections.
- Knowledge of manufacturing processes and materials for creating feasible and cost-effective designs.
- Evaluate/optimize manufacturing assembly processes by designing, modifying, and testing manufacturing methods and equipment, conferring with equipment vendors, and soliciting observations from production team
- Adopt at creating detailed electrical design of components, sub-assemblies, and system integration
- Capable of creating a Bill of Materials (BOM) for release to manufacturing
- Manage relationships with power systems, electronics, control component vendors, and contract manufacturers
- Keep updated with the latest technologies and methods to ensure competitive and cost-effective designs
- Discuss with management and production staff to assess engineering feasibility and cost-effectiveness
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s degree in Electrical Engineering, Industrial Design or relevant field is required
Experience:
- 6-8 years of experience in electrical design within the power distribution or data center industry.
- Proven experience as a CAD designer, preferably in an electrical engineering environment.
- Proficiency in CAD software (AutoCAD Electrical, Revit).
- Strong understanding of electrical systems, integration strategy, and system coordination
- Excellent problem-solving skills and attention to detail
- Effective communication skills to liaise with engineers, manufacturers, and clients, explaining designs and modifications clearly and efficiently
Knowledge, Skills, Abilities:
- Strong knowledge of electrical design, manufacturing processes, and material properties.
- Power Systems, PLC, VFD, motor control, electronic automation control device, sensors, AC/DC, single phase and three phase power systems.
- Electrical Standards, Codes, and regulations: IEEE, UL, ANSI/NEMA, NFPA 70E, NEC, IEC, CSA.
- Excellent interpersonal and communication skills.
- Creative, self-motivated, accountable, and team-oriented.
- Able to work independently with minimal oversight.
- Effective at presenting information and responding to management, clients, and public queries.
- Capable of influencing others and sharing best practices.
- Comfortable working as part of a global team.
- Capable of assessing projects, articulating risks, and developing project milestones.
- Familiar with stage-gate processes in project lifecycle management (PLCM).
Remote working/work at home options are available for this role.
Job Family: General Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Lead Electrical CAD Designer will be responsible for creating detailed model designs, modifying existing designs, and working collaboratively with engineers and other team members to meet product specifications. The ideal candidate has in-depth knowledge of various electrical design tools, is detail-oriented, and can effectively communicate design ideas. A strong understanding of Electrical design principles, manufacturing processes, power distribution, automation control (PLC), and electronic device parts are critical. This role will involve selecting key components, developing detailed drawings for control panels, power distribution systems, electrical wiring, and transitioning design to manufacturing.
What will you do?
- Creating 2D and 3D models of electrical systems, particularly for complex projects or when visualization is needed
- Participating in design reviews to ensure accuracy and compliance with requirements
- Advanced proficiency in various CAD software, such as AutoCAD Electrical, Revit, Windchill, Autodesk Inventor-EMX, Autodesk Fusion, to design, draft, and model complex electrical for power system and automation control
- Strong understanding of electrical symbols, power systems and automation control with the concepts to accurately create designs that meet technical specifications and standards
- Work closely with engineers and other designers to meet product specifications and performance requirements
- Modify and revise designs to correct operating deficiencies or to reduce production problems
- Prepare and revise engineering drawings, schematics, BOMs, and layouts as required.
- Check and validate designs to ensure they meet required quality and safety standards
- Excellent attention to detail for ensuring the accuracy of measurements, dimensions, and design specifications
- Strong analytical skills for interpreting complex technical drawings, single line diagram, wiring diagram, schematic, power plan, automation control, ladder diagram, and electrical device specifications
- Designing and creating schematic PLC input/output connections.
- Knowledge of manufacturing processes and materials for creating feasible and cost-effective designs.
- Evaluate/optimize manufacturing assembly processes by designing, modifying, and testing manufacturing methods and equipment, conferring with equipment vendors, and soliciting observations from production team
- Adopt at creating detailed electrical design of components, sub-assemblies, and system integration
- Capable of creating a Bill of Materials (BOM) for release to manufacturing
- Manage relationships with power systems, electronics, control component vendors, and contract manufacturers
- Keep updated with the latest technologies and methods to ensure competitive and cost-effective designs
- Discuss with management and production staff to assess engineering feasibility and cost-effectiveness
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s degree in Electrical Engineering, Industrial Design or relevant field is required
Experience:
- 6-8 years of experience in electrical design within the power distribution or data center industry.
- Proven experience as a CAD designer, preferably in an electrical engineering environment.
- Proficiency in CAD software (AutoCAD Electrical, Revit).
- Strong understanding of electrical systems, integration strategy, and system coordination
- Excellent problem-solving skills and attention to detail
- Effective communication skills to liaise with engineers, manufacturers, and clients, explaining designs and modifications clearly and efficiently
Knowledge, Skills, Abilities:
- Strong knowledge of electrical design, manufacturing processes, and material properties.
- Power Systems, PLC, VFD, motor control, electronic automation control device, sensors, AC/DC, single phase and three phase power systems.
- Electrical Standards, Codes, and regulations: IEEE, UL, ANSI/NEMA, NFPA 70E, NEC, IEC, CSA.
- Excellent interpersonal and communication skills.
- Creative, self-motivated, accountable, and team-oriented.
- Able to work independently with minimal oversight.
- Effective at presenting information and responding to management, clients, and public queries.
- Capable of influencing others and sharing best practices.
- Comfortable working as part of a global team.
- Capable of assessing projects, articulating risks, and developing project milestones.
- Familiar with stage-gate processes in project lifecycle management (PLCM).
Remote working/work at home options are available for this role.
temporary
jobs by
✓ All jobs loaded