Engineering Jobs in Phoenix Az Flexible
276 positions found — Page 17
D
Mechanical Engineer
Salary not disclosed
DRA Global Limited is an international multi-disciplinary engineering, project delivery and operations management group, predominantly focused on the mining, minerals and metals industry.
The Group has an extensive track record spanning almost four decades across a wide range of commodities. Our teams have deep expertise in the mining, minerals and metals processing industries, as well as related non-process infrastructure such as, water, and energy solutions.
DRA covers all major mining centers with offices across Africa and the Middle East, North and South America, USA and Asia-Pacific.
We are seeking a Mechanical Engineer, based out of our Phoenix office. This position is responsible for the engineering and discipline project design activities relating to concept, pre-feasibility, feasibility studies, EPCM and EPC projects. Main functions include (but not limited to): design engineering, technical support, package management, site support, commissioning, and documentation and handover.
Engineering
- Carries out innovative detailed designs as required for specific disciplines following good engineering practices
- Designs conveyor and piping systems in area of responsibility (checked by relevant BMH or piping technical lead)
- Ensures that the quality of discipline designs are carried out in accordance with client standards and specifications, industry standards and the relevant legislation
- Provides design interface between disciplines
- Ensures certified design information received from vendors, contractors and consultants is accurate and interfaces with other designs
- Ensures the effective peer review and approval of discipline design
- Ensures continuous improvement, lessons learnt, value engineering, fit for purpose and latest technologies are implemented
- Is responsible for the engineering discipline sign off
- Interfaces with internal and external design and drafting disciplines
- Provides discipline inputs for studies and proposals
- Provides engineering support to the site team
- Performs commissioning discipline activities
- Manages the mark-up and back droughting of redline drawings
Operational Management
- Provides input into all SHE matters, actively participates, and promotes a total safety culture.
- Ensures that relevant project procedures are complied with
- Ensures that fabrication, manufacturing, and construction drawings are issued according to the project programmer
- Manages the time schedule, cost, quality, risk and scope of assigned procurement packages.
- Ensures assigned packages are installed / constructed in accordance with the project & vendor specifications
- Manages, inspects and releases the relevant items of procurement, fabrication and construction within area of discipline and responsibility
- Participates in the Total Safety Culture of DRA and site safety requirements
- Assists with the commissioning of the assigned packages in accordance with the project & vendor specifications
- Ensures that reports are structured, accurate, complete and well presented
- Displays proactive communication with project team with respect to discipline interface and problem solving
Financial
- Manages personal and design/droughting budget man-hours
- Manages budget as allocated per discipline/procurement package
- Ensures designs produced are in accordance with capital budget and quantities
- Ensures suitable contract management is applied to managed procurement packages
- Ensures proper change management procedure is adhered to
Client Relations
- Ensures that all interactions with Clients are conducted in professional and respectful manner
- Ensures that Clients are kept informed and updated on the technical aspects of the project
- Ensures that DRA remains the Clients engineering service provider of choice
- Liaises and co-ordinates with the client's discipline engineers to ensure adherence to project and client requirements and specifications
PHYSICAL REQUIREMENTS/CONDITIONS
- While performing duties of this job, you may be required to stand, sit, alternate between sitting and standing, push/pull as necessary, reach overhead or below shoulder level, kneel, squat, stoop, crawl, and work at heights utilizing proper fall protection.
- Ability to access all areas of the job site and conduct physical evaluations of grounds and equipment including ability to work at high elevations.
- Personal protective equipment may be required when performing work on-site, including hard hat, hearing protection, safety glasses, safety footwear, and as needed, respirator, protective clothing, gloves, and any other PPE as required.
- Work may be performed on an active mining construction site with various associated risks.
EDUCATION/SKILLS/EXPERIENCE REQUIRED
- Experience of onsite construction and commissioning experience within a multi-disciplinary team in Industrial, Mining & Minerals, Oil & Gas, or equivalent environment.
- Bachelor's degree in mechanical engineering preferred.
- Registered as a licensed Professional Engineer in the state of Arizona - desirable.
Note: This position is hybrid to Phoenix, AZ with onsite presence required at our Tucson site*****
DRA Global is committed to building a diverse and inclusive workplace where everyone feels valued and supported. We believe that diversity strengthens our ability to reach our goals, enhances our reputation, and helps us attract, engage, and retain great people.
We welcome applications from individuals of all backgrounds, regardless of gender, age, disability, ethnicity, or any other characteristic. Our values — People, Safety, Trust, Integrity, Excellence, and Courage — reflect our ongoing commitment to equal opportunities and an inclusive culture.
Not Specified
T
General Manager
Salary not disclosed
Trade-Wind Manufacturing LLC, part of Composition Brands, is a leading manufacturer of premium residential ventilation products for indoor and outdoor use. Headquartered in Phoenix, AZ, Trade-Wind is recognized for innovative design, quiet performance, and ease of installation. The company is committed to engineering excellence, superior customer service, and the highest standards of quality and craftsmanship.
The General Manager/Vice President serves as the senior executive leader of Trade-Wind Manufacturing LLC, the ventilation platform within Composition Brands. Based in Phoenix, Arizona, and reporting directly to the Composition Brands President, this role has full P&L ownership and accountability for the company's strategy, financial performance, operational execution, and long-term value creation.
This leader sets the strategic direction of the business while ensuring disciplined execution across manufacturing, engineering, product management, finance, quality, and commercial functions. The position is responsible for driving profitable growth, strengthening operational performance, advancing product innovation, and delivering a best-in-class customer experience within the luxury residential appliance market.
The role builds and develops a high-performing organization with the talent, systems, and culture required to compete and win in a demanding, design-focused market, while upholding the highest standards of integrity, safety, and quality.
Responsibilities
- Lead the development and execution of long-term strategy to drive sustained revenue growth, market share expansion, and margin improvement.
- Own full P&L performance, delivering annual commitments while driving operational and financial discipline.
- Translate strategic objectives into clear priorities, resource allocation plans, and measurable execution roadmaps across all functions.
- Establish and govern KPIs, dashboards, and performance management mechanisms that strengthen accountability and decision-making.
- Direct world-class operations across multiple manufacturing facilities, ensuring safety, quality, productivity, and on-time delivery.
- Champion Lean, Six Sigma, and continuous improvement initiatives to optimize cost, throughput, quality, and overall value stream performance.
- Ensure product quality, reliability, and craftsmanship consistently meet or exceed luxury market expectations.
- Develop scalable operational infrastructure, systems, and workforce capability to support sustained growth.
- Lead manufacturing footprint strategy, including make-versus-buy decisions, outsourcing strategy, and supplier optimization.
- Partner closely with Finance to develop budgets, forecasts, capital allocation plans, and long-term investment strategies aligned with business priorities.
- Monitor business performance, identify variances, and implement corrective actions to protect profitability and cash flow.
- Evaluate capital investments, manufacturing technologies, and operational enhancements that drive long-term enterprise value.
- Collaborate with Engineering, Product Management, and Sales to define innovation priorities, product roadmaps, and competitive positioning.
- Ensure alignment of product lifecycle planning with customer needs, market trends, and profitability objectives.
- Support channel and distribution strategies, strengthening relationships with dealers and distributors.
- Provide operational and product insight to enhance sales initiatives and commercial execution.
- Build, lead, and inspire a high-performance organization focused on accountability, results, and customer excellence.
- Attract, retain, and develop top talent while fostering strong succession planning and leadership bench strength.
- Champion a culture grounded in safety, continuous improvement, collaboration, and ethical business practices.
- Ensure strict adherence to safety standards, manufacturing best practices, and regulatory requirements.
- Enforce robust quality management systems and corrective-action processes to protect brand reputation and product integrity.
- Promote proactive identification and communication of operational and product risks.
- Provide clear, consistent communication of business performance, risks, and strategic priorities to executive leadership.
- Build strong, trust-based relationships with internal teams, suppliers, partners, and key customers.
- Foster open communication, transparency, and cross-functional alignment throughout the organization.
Requirements
- Bachelor's degree in Finance, Business, Operations Management, or a related field required; Master's degree preferred.
- Minimum of 8+ years of senior leadership experience in a multi-site manufacturing environment.
- Demonstrated ability to provide strategic organizational leadership while ensuring strong operational performance and ethical decision-making.
- Proven experience leading cross-functional teams in operations, engineering, finance, and commercial environments.
- Strong expertise in organizational development, talent management, budget oversight, and strategic planning.
- Ability to operate effectively in a fast-paced environment while driving clarity, alignment, and results.
- Deep understanding of Lean manufacturing principles, Six Sigma, and waste elimination methodologies.
- Strong financial acumen with P&L ownership experience.
- Proficiency in Microsoft Office applications (Outlook, Excel, Word, PowerPoint).
- Excellent verbal and written communication skills.
- High level of professionalism, discretion, and integrity in handling confidential information.
- Self-motivated, proactive, and resourceful, with a strong commitment to performance and company values.
Trade-Wind Manufacturing LLC is an Equal Employment Opportunity (EOE/M/F/Vets/Disabled) employer and welcomes all qualified applicants.
Not Specified
F
Experienced Welder Fabricator
Salary not disclosed
About Factory Karts
At Factory Karts, we don't just build go-karts; we build championship-winning machines. Based in the heart of Phoenix, we are a fast-growing leader in the karting industry, dedicated to performance, innovation, and our racing community. We're looking for a Fulfillment Specialist who takes as much pride in the \"final lap\" of the customer experience as we do in our engineering.
The Role
We are looking for a precision-driven Welder Fabricator to join our production headquarters. This isn't your average fabrication job; this is high-performance motorsports manufacturing. We need a craftsman who understands that in racing, a weld isn't just a joint—it's a critical safety component and a work of art. You will be responsible for the assembly and TIG welding of kart chassis, components, and specialized racing equipment where strength, weight, and aesthetics must meet perfectly.
Key Responsibilities
- Precision TIG Welding: Primary focus on thin-wall 4130 Chromoly tubing and aluminum components.
- Fabrication & Fitment: Interpret blueprints and shop drawings to notch, bend, and fit tubing with extreme accuracy before welding.
- Jig Work: Work within tight-tolerance chassis jigs to ensure every frame is perfectly straight, square, and race-ready.
- Finishing: Expertly grind, sand, and prep surfaces for powder coating or plating.
- Prototype Support: Collaborate with our engineering team to develop new components and custom racing solutions.
What We're Looking For
- Proven Experience: A strong history of high-quality TIG welding (preferably in motorsports, aerospace, or custom automotive).
- Blueprint Fluency: The ability to read a technical drawing and turn it into a physical part with minimal supervision.
- Equipment Mastery: Proficiency with cold saws, tube notchers, benders, and precision hand tools.
- The \"Racing Mindset\": A dedication to quality and an understanding of the high-stakes environment of competitive racing.
Why Join Us?
- Competitive pay and growth opportunities within a growing brand.
- A high-energy work environment surrounded by world-class racing technology.
Not Specified
System Safety Engineer II
🏢 Raytheon
Salary not disclosed
Date Posted:
2026-02-10Country:
United States of AmericaLocation:
US-AZ-TUCSON-808 ~ 1151 E Hermans Rd ~ BLDG 808Position Role Type:
OnsiteU.S. Citizen, U.S. Person, or Immigration Status Requirements:
Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearanceSecurity Clearance Type:
DoD Clearance: SecretSecurity Clearance Status:
Active and existing security clearance required on day 1At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.
System Safety / Human System Integration (HSI) Department ensures our products Safety and Human Factors disciplines are incorporated into all our engineering and program execution to provide for our customers critical needs. Location: Tucson, AZ
What You Will Do
This is an exciting opportunity for a highly motivated System Safety Engineer II to join us onsite in Tucson, AZ.
- Execute the safety strategy for the program to meet all its milestones with system safety/HSI features integrated into the product in compliance with contract and awarded funding.
- Support the program schedule and integrated system safety tasks and activities into program Integrated Master Schedule (IMS).
- Engage the Lead System Safety Engineer and Portfolio Engineering Lead for guidance on technical execution, artifact review, attending customer reviews, etc.
- Support multi-IPT program meetings to ensure that system safety items are considered and to understand current program-wide issues.
- Ensure program leadership understands system safety requirements, hazards, and planned mitigations.
- Meet internal and external commitments (deliveries).
- Own technical solutions and collaborate across IPTs to realize the solution that makes the overall product development and test successful.
Qualifications You Must Have
- Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 2 years of prior relevant experience.
- Experience with risk assessment concepts, such as those in MIL-STD 882E.
- Experience writing technical reports and presentations.
- Active and transferable U.S. government issued Secret security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance.
Qualifications We Prefer
- Experience with test equipment & test equipment safety, in a laboratory setting.
- Experience performing MIL-STD-882 System Safety Program tasks and analyses, involving management (task series 100), analysis (task series 200), evaluation (task series 300), and verification (task series 400).
- Experience preparing internal and customer reports describing various analyses relevant to the System Safety program.
- Experience reviewing software code and requirements for safety considerations.
- Experience collaborating across multiple disciplines.
- Experience interfacing with other engineering functions: Systems Engineering, Software or Firmware Engineering, Electrical Engineering, Hardware Engineering.
- Experience managing Working Groups.
- Active Top Secret security clearance.
What We Offer
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation
Learn More & Apply Now!
- Please consider the following role type definition as you apply for this role.
- Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.
- About Tucson: Tucson, AZ - position requires an eligibility for a U.S. government issued security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:
- Relocation Eligible
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
The salary range for this role is 68,900 USD - 131,100 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
permanent
N
Visual Inspector, Cleanroom - 2nd Shift
Salary not disclosed
Description
****This is a 2nd shift position, schedule Monday
- Thursday 3:30pm
- 2am
**** Essential Duties: Perform visual inspection.
Ensures quality of manufactured goods.
Inspect goods as they are finished.
Examine materials from production line before packaging product.
Ensure company is meeting required specifications in the manufacturing process.
Perform polishing of inspected product.
Record pass/fail grade of products.
Produce detailed reports.
Count number of products tested or inspected.
Weigh product and samples to verify packaging weight.
Compare color, shape, texture, or grade of material with color chart, template, or sample to ensure consistency.
Package product as needed.
Knowledge and Abilities: Ability to read engineering drawings, technical specifications, product certifications, manufacturing planning, and inspection procedures.
Ability to interpret SPC plans and results.
Strong attention to detail, close observation and concentration skills.
Excellent decision making, planning and organizational skills.
Report product status accurately, record "turn-backs for resolution, analyze product history for trends and identify nonconforming material to be properly documented and segregated using Computer software.
Prepare and use standard documentation for reporting and detailed inspection plans for the purpose of recording measurement results on Computer software .
Inspector is expected to have a comprehensive understanding of appropriate workmanship standards and be able to use sampling plans to establish product acceptance in line with the customer's specifications.
Possess a fundamental knowledge of manufacturing processes, familiarity and knowledge of machining, and a basic understanding of special processes (i.e heat treatment, plating, welding, etc.).
Work safely in a manufacturing environment.
Ability to work independently and in a team.
Education and Experience: High School Diploma or GED required.
A minimum of 1-3 years inspection experience in a manufacturing environment is preferred.
Preference to have visual inspecting experience with semi-conductor products and/or aerospace products and assemblies.
Nesco Resource offers a comprehensive benefits package for our associates, which includes a MEC (Minimum Essential Coverage) plan that encompasses Medical, Vision, Dental, 401K, and EAP (Employee Assistance Program) services.
Nesco Resource provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.
****This is a 2nd shift position, schedule Monday
- Thursday 3:30pm
- 2am
**** Essential Duties: Perform visual inspection.
Ensures quality of manufactured goods.
Inspect goods as they are finished.
Examine materials from production line before packaging product.
Ensure company is meeting required specifications in the manufacturing process.
Perform polishing of inspected product.
Record pass/fail grade of products.
Produce detailed reports.
Count number of products tested or inspected.
Weigh product and samples to verify packaging weight.
Compare color, shape, texture, or grade of material with color chart, template, or sample to ensure consistency.
Package product as needed.
Knowledge and Abilities: Ability to read engineering drawings, technical specifications, product certifications, manufacturing planning, and inspection procedures.
Ability to interpret SPC plans and results.
Strong attention to detail, close observation and concentration skills.
Excellent decision making, planning and organizational skills.
Report product status accurately, record "turn-backs for resolution, analyze product history for trends and identify nonconforming material to be properly documented and segregated using Computer software.
Prepare and use standard documentation for reporting and detailed inspection plans for the purpose of recording measurement results on Computer software .
Inspector is expected to have a comprehensive understanding of appropriate workmanship standards and be able to use sampling plans to establish product acceptance in line with the customer's specifications.
Possess a fundamental knowledge of manufacturing processes, familiarity and knowledge of machining, and a basic understanding of special processes (i.e heat treatment, plating, welding, etc.).
Work safely in a manufacturing environment.
Ability to work independently and in a team.
Education and Experience: High School Diploma or GED required.
A minimum of 1-3 years inspection experience in a manufacturing environment is preferred.
Preference to have visual inspecting experience with semi-conductor products and/or aerospace products and assemblies.
Nesco Resource offers a comprehensive benefits package for our associates, which includes a MEC (Minimum Essential Coverage) plan that encompasses Medical, Vision, Dental, 401K, and EAP (Employee Assistance Program) services.
Nesco Resource provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.
Not Specified
A
Senior BA/BSA (Hybrid)
Salary not disclosed
Job Title: Senior BA/BSA Location: [Location] Pay: [Pay] Role Summary Nuveen Operational Technology Team seeks an experienced professional with expertise in Investment Performance and GIPS measurement and reporting using Eagle STAR and Eagle Performance module.
Engage in both project-related and BAU-specific enhancements as needed.
Manage and prioritize the product backlog, including epics, features, and user stories.
Translate product managers' strategies into development tasks while understanding customer and market requirements.
Maintain communication with customers, partners, and developers, and update the Product Backlog regularly.
Key Duties and Responsibilities 10 years of progressive work experience in the investment management space.
Knowledge across front, middle, and back-office solutions focusing on investment/asset management.
Proficient in investment operational processes such as accounting, trade settlement, corporate actions, and collateral management.
Deep knowledge in Fixed Income, Equity, and Derivatives performance measurement is essential.
Good working knowledge of Eagle data enrichment, performance calculation construction, and Eagle data mart modules.
Experience in identifying and resolving performance returns issues.
Strong investment data knowledge across EQ, FI, Derivatives, and alternate assets.
Familiarity with operational processes including Mutual Funds, CITs, ETFs, and Separately Managed Accounts.
Strong working knowledge of Eagle suite of products (Accounting, Pricing, Investment Performance, and Data Management).
Ability to review business users' current processes and identify improvement strategies to enhance business efficiency and customer satisfaction.
Prepare Functional Requirement Documents, BRDs, and perform impact and gap analysis with formal documentation.
Identify and communicate risks during analysis and raise flags in advance.
Lead or contribute to end-to-end analysis tasks like scoping, estimation, planning, work allocation, resource management, progress tracking, status reporting, UAT support, and production deployment.
Facilitate regular communication with IT and business partners to monitor project progress, task status, and address issues.
Strong understanding of data integration, metadata management, data quality, and ability to run SQL queries for data analysis.
Excellent communication and written skills.
Experience in a fast-paced and agile environment is a must.
Educational Requirements Graduation in Computer Engineering or related subjects.
Post Graduation or specialization in Finance or Financial Services is an added advantage.
Work Experience 10 to 11 years of relevant work experience (Team Members/Lead/Manager).
Remote working/work at home options are available for this role.
Engage in both project-related and BAU-specific enhancements as needed.
Manage and prioritize the product backlog, including epics, features, and user stories.
Translate product managers' strategies into development tasks while understanding customer and market requirements.
Maintain communication with customers, partners, and developers, and update the Product Backlog regularly.
Key Duties and Responsibilities 10 years of progressive work experience in the investment management space.
Knowledge across front, middle, and back-office solutions focusing on investment/asset management.
Proficient in investment operational processes such as accounting, trade settlement, corporate actions, and collateral management.
Deep knowledge in Fixed Income, Equity, and Derivatives performance measurement is essential.
Good working knowledge of Eagle data enrichment, performance calculation construction, and Eagle data mart modules.
Experience in identifying and resolving performance returns issues.
Strong investment data knowledge across EQ, FI, Derivatives, and alternate assets.
Familiarity with operational processes including Mutual Funds, CITs, ETFs, and Separately Managed Accounts.
Strong working knowledge of Eagle suite of products (Accounting, Pricing, Investment Performance, and Data Management).
Ability to review business users' current processes and identify improvement strategies to enhance business efficiency and customer satisfaction.
Prepare Functional Requirement Documents, BRDs, and perform impact and gap analysis with formal documentation.
Identify and communicate risks during analysis and raise flags in advance.
Lead or contribute to end-to-end analysis tasks like scoping, estimation, planning, work allocation, resource management, progress tracking, status reporting, UAT support, and production deployment.
Facilitate regular communication with IT and business partners to monitor project progress, task status, and address issues.
Strong understanding of data integration, metadata management, data quality, and ability to run SQL queries for data analysis.
Excellent communication and written skills.
Experience in a fast-paced and agile environment is a must.
Educational Requirements Graduation in Computer Engineering or related subjects.
Post Graduation or specialization in Finance or Financial Services is an added advantage.
Work Experience 10 to 11 years of relevant work experience (Team Members/Lead/Manager).
Remote working/work at home options are available for this role.
Not Specified
D
Engineer, Quality Complaint Investigation (CAPA) - Hybrid
Salary not disclosed
DivIHN (pronounced “divine”) is a CMMI ML3-certified Technology and Talent solutions firm.
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries about this opportunity, please contact one of our Talent Specialists, Hema, at (63 or Sri Balan at (63 Title
- Engineer, Quality Complaint Investigation (CAPA)
- Hybrid Duration: 9 Months Location: Hybrid at Skaneateles, NY Local candidates preferred Will consider relocation candidates Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered.
Description: I.
SUMMARY: This description outlines the employment prerequisites and job responsibilities for the position of Engineer, Quality Complaint Investigation.
II.
ESSENTIAL FUNCTIONS: This position has primary responsibility for investigation, review, and completion of all Quality Engineering complaint issue analysis tasks utilizing various quality system inputs.
Review individual complaints and associated service data to determine risk level and complete investigation into the as determined problem code and cause codes for each complaint.
Analyze data from various quality inputs (including but not limited to: Field Corrective Action (FCA), Complaints, FDA Medical Device Reports (MDR), etc.) to determine trends and systemic issues.
Prepare and issue reports based on information analysis.
Review existing investigation reports and identify gaps for GMP compliance.
Develop strategies and plans to close the gaps in an efficient and technical manner.
Develop and communicate expectations for quality performance, continuous improvement, and process controls for marketed products.
Monitor and drive corrective action and continuous improvement activities that directly impact performance measures by performing primary investigations, conducting data analysis, and implementing corrective actions.
Conduct or lead corrective and preventive actions in manufacturing using formal problem-solving tools and documentation.
Support CAPA and maintenance activities for existing product lines.
Recommend and/or support projects for improvements to the quality system as approved by management.
III.
QUALIFICATIONS, KNOWLEDGE, AND SKILLS REQUIRED Medical Device Experience with knowledge of 21CFR820 preferred.
Investigational research skills Experience with any statistical software packages (Minitab a plus) Desired experience in the medical device industry in the development and deployment of Quality Systems, process controls, and continuous improvement methods.
Knowledge and working application of FDA cGMP; ANSI/ISO/ASQC requirements; CMDAS (optional).
Knowledge and working application of reading and understanding blueprints and technical drawings.
Demonstrated strong analytical problem-solving (Root Cause Investigations.
Display a solid technical understanding of engineering principles and procedures (e.g., CAD and its application or scheduling a series of technical tasks utilizing software-based tools).
Computer competency in Word, Excel, PowerPoint, Minitab, Access, and databases.
Ability to multitask and methodically manage projects.
IV.
EDUCATION/EXPERIENCE REQUIRED A Bachelor of Science degree in Engineering 1-3 years of Medical Device experience V.
PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee: Must be able to sit for long periods of time Must have good hand-to-eye coordination and dexterity Physical Requirements: Dynamic Lifting capability: Must have the ability to lift 40 pounds at a time.
VI.
WORK ENVIRONMENT Work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of the job.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
This is a manufacturing environment regulated by the FDA and many other work rules to prevent damage to the product we manufacture.
Some of those work rules include, but are not limited to: Wearing a static protective smock at all times while in the work area Wearing a ground wrist strap and plugging that wrist strap into the working table.
Working in proximity to other employees.
Working in an environment that is temperature and humidity-controlled.
Responsibilities: Will be addressing customer complaints and leading complaints investigation.
Identify RCA.
Collaborates with the Engineer, Product service teams and follow-up on service updates.
Quality experience is preferred 2 years would be ideal.
Good to have experience in technical writing and handling class ii medical device.
Will be writing customer feedback letter addressing customer issues and root-cause findings.
Will support the functions of NCQ, CAPA, Audit.
Current team has 2 perm, 3 contract, backfill will be for the 3rd.
Getting about 1000 complaints a month, want to keep it less than 100 actions a week.
Looking for a good communicator who is good at follow-ups.
Proficiency with SAP, ETQ, Trackwise will be preferred.
Will be onsite for Team meeting, addressing complaints, once a month data trending, warehouse visits when required.
Education: Bachelors is a must have.
Interview: Remote/ virtual screening with final onsite interview.
About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
SAP, Medical Device, Quality Systems, EtQ
Remote working/work at home options are available for this role.
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries about this opportunity, please contact one of our Talent Specialists, Hema, at (63 or Sri Balan at (63 Title
- Engineer, Quality Complaint Investigation (CAPA)
- Hybrid Duration: 9 Months Location: Hybrid at Skaneateles, NY Local candidates preferred Will consider relocation candidates Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered.
Description: I.
SUMMARY: This description outlines the employment prerequisites and job responsibilities for the position of Engineer, Quality Complaint Investigation.
II.
ESSENTIAL FUNCTIONS: This position has primary responsibility for investigation, review, and completion of all Quality Engineering complaint issue analysis tasks utilizing various quality system inputs.
Review individual complaints and associated service data to determine risk level and complete investigation into the as determined problem code and cause codes for each complaint.
Analyze data from various quality inputs (including but not limited to: Field Corrective Action (FCA), Complaints, FDA Medical Device Reports (MDR), etc.) to determine trends and systemic issues.
Prepare and issue reports based on information analysis.
Review existing investigation reports and identify gaps for GMP compliance.
Develop strategies and plans to close the gaps in an efficient and technical manner.
Develop and communicate expectations for quality performance, continuous improvement, and process controls for marketed products.
Monitor and drive corrective action and continuous improvement activities that directly impact performance measures by performing primary investigations, conducting data analysis, and implementing corrective actions.
Conduct or lead corrective and preventive actions in manufacturing using formal problem-solving tools and documentation.
Support CAPA and maintenance activities for existing product lines.
Recommend and/or support projects for improvements to the quality system as approved by management.
III.
QUALIFICATIONS, KNOWLEDGE, AND SKILLS REQUIRED Medical Device Experience with knowledge of 21CFR820 preferred.
Investigational research skills Experience with any statistical software packages (Minitab a plus) Desired experience in the medical device industry in the development and deployment of Quality Systems, process controls, and continuous improvement methods.
Knowledge and working application of FDA cGMP; ANSI/ISO/ASQC requirements; CMDAS (optional).
Knowledge and working application of reading and understanding blueprints and technical drawings.
Demonstrated strong analytical problem-solving (Root Cause Investigations.
Display a solid technical understanding of engineering principles and procedures (e.g., CAD and its application or scheduling a series of technical tasks utilizing software-based tools).
Computer competency in Word, Excel, PowerPoint, Minitab, Access, and databases.
Ability to multitask and methodically manage projects.
IV.
EDUCATION/EXPERIENCE REQUIRED A Bachelor of Science degree in Engineering 1-3 years of Medical Device experience V.
PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee: Must be able to sit for long periods of time Must have good hand-to-eye coordination and dexterity Physical Requirements: Dynamic Lifting capability: Must have the ability to lift 40 pounds at a time.
VI.
WORK ENVIRONMENT Work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of the job.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
This is a manufacturing environment regulated by the FDA and many other work rules to prevent damage to the product we manufacture.
Some of those work rules include, but are not limited to: Wearing a static protective smock at all times while in the work area Wearing a ground wrist strap and plugging that wrist strap into the working table.
Working in proximity to other employees.
Working in an environment that is temperature and humidity-controlled.
Responsibilities: Will be addressing customer complaints and leading complaints investigation.
Identify RCA.
Collaborates with the Engineer, Product service teams and follow-up on service updates.
Quality experience is preferred 2 years would be ideal.
Good to have experience in technical writing and handling class ii medical device.
Will be writing customer feedback letter addressing customer issues and root-cause findings.
Will support the functions of NCQ, CAPA, Audit.
Current team has 2 perm, 3 contract, backfill will be for the 3rd.
Getting about 1000 complaints a month, want to keep it less than 100 actions a week.
Looking for a good communicator who is good at follow-ups.
Proficiency with SAP, ETQ, Trackwise will be preferred.
Will be onsite for Team meeting, addressing complaints, once a month data trending, warehouse visits when required.
Education: Bachelors is a must have.
Interview: Remote/ virtual screening with final onsite interview.
About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
SAP, Medical Device, Quality Systems, EtQ
Remote working/work at home options are available for this role.
Not Specified
D
Full Stack Software Engineer (Java/Kotlin, Angular) - Remote
🏢 DivIHN Integration Inc
Salary not disclosed
DivIHN (pronounced “divine”) is a CMMI ML3-certified Technology and Talent solutions firm.
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries about this opportunity, please contact our Talent Specialist, Hema, at (63 Title: Full Stack Software Engineer (Java/Kotlin, Angular)
- Remote Duration: 12 Months with potential to extend and to convert to full-time Location: Remote Schedule: Monday Friday, 8 AM 5 PM or 9 AM 6 PM PST Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered.
Description: Participate in daily stand-ups, sprint planning, and retrospectives as part of an agile team.
Design, develop, and maintain UI and APIs for client centralized account and consent management system Ensure APIs are scalable, low-latency, and fault-tolerant to meet business and customer needs.
Build responsive frontend and backend applications using modern frameworks and technologies such as Spring Boot, Java, and Kotlin.
Write and maintain unit tests, integration tests, and end-to-end tests using frameworks like JUnit, Mocha, and Karma.
Design and optimize database schemas and queries to ensure efficient data storage and retrieval.
Collaborate with cross-functional teams to integrate design, development, testing, and quality control.
Ensure code quality and reliability through continuous testing and code reviews.
Use tools like Kubernetes (K8s) and Helm for orchestration and management of containerized applications.
Ensure secure access to APIs and data.
Set up and maintain CI/CD pipelines using tools like GitHub Actions.
Automate build, test, and deployment processes to ensure rapid and reliable delivery of software.
Monitor and optimize the performance of data pipelines and APIs.
Identify and resolve bottlenecks to ensure high availability and responsiveness.
Document API specifications, design decisions, and development processes.
Collaborate with team members, stakeholders, and partners to gather requirements and provide technical support Troubleshoot issues and fix bugs quickly Summary: The main function of a Software Engineer is to design, develop, implement, test, and maintain business and computer applications software or specialized utility programs, including mainframe and client/server applications, and major enhancements of existing systems.
Job Responsibilities: Fine-tune and improve a variety of sophisticated software implementation projects.
Gather and analyze system requirements, document specifications, and develop software solutions to meet client needs and data.
Analyze and review enhancement requests and specifications.
Implement system software and customize it to the client's requirements.
Prepare the detailed software specifications and test plans.
Code new programs to the client's specifications and create test data for testing.
Modify existing programs to new standards and conduct unit testing of developed programs.
Create migration packages for system testing, user testing, and implementation.
Provide quality assurance reviews.
Perform post-implementation validation of software and resolve any bugs found during testing.
Position Overview This is a hands-on Full Stack Developer role, not a leadership or managerial position.
The ideal candidate should be passionate about learning, product development, continuous improvement, and collaborating closely with QA to ensure high quality product releases.
Candidate will work on both front end and back end development within a modern cloud and microservices environment.
Skills Java or Kotlin server-side development experience is the most important skill.
Experience working with REST APIS, Message Bus (Kafka or Pubsub), and SQL/NOSQL Database is the 2nd most important skill.
RESTful Go services Argo CD Bonus Skills: Spring Boot or another Java web framework experience, FHIR, Unit / Integration testing, and performance monitoring experience.
Meet the team: Data Platform team builds low-latency, fault-tolerant data pipelines and APIs to meet various business and customer needs.
Your role will involve building APIs for customer onboarding, account management, hospital /partner integrations, and CGM Data exchange.
This team manages the identity and authentication platform for Dexcom products.
The focus is on building secure, scalable, and user-friendly authentication services.
Candidate will work closely with a tech lead, UI/UX designers, and a squad team.
Where you come in: You will develop cloud-based software systems (APIs and Websites) as part of a multi-disciplinary team that works with an Agile methodology and integrates design, development, testing, and quality control.
What makes you successful: You bring with you rich experience developing full-stack applications Comfortable being part of an agile team that builds components as part of a distributed environment You must be proficient in building responsive frontend and backend applications using modern frameworks and technologies.
- Spring Boot, NodeJS, Express You possess strong Programming skills in one of the following languages: Kotlin, Java, JavaScript/Typescript You are an expert at developing web applications with Angular or another modern JavaScript framework You have previously worked with a NoSQL (Cassandra, MongoDB, DynamoDB) or RDBMS (MySQL, Postgres, Oracle) You understand and practice TDD / BDD using modern software test methodologies and frameworks like Junit, Mocha, Karma You know how to containerize an application using Docker and deploy to the cloud You possess fair knowledge of authentication/authorization concepts such as OAuth, OpenID, and SSO Other preferred bonus skills: GitHub Actions, Helm, K8s, Google Cloud Platform Required Skills (top 3 non-negotiables): 1.
Programming in Java / Kotlin 2 years minimum 2.
REST APIs and Angular 3.
RDBMS Preferred Skills (nice to have) 1.
Containerization and GCP or AWS 2.
Keycloak 3.
Spring Boot, Karate/Playwright Testing Framework Software Skills Required: Mobile app dev (iOS Android ideal, but iOS only is acceptable), backend dev Other preferred bonus skills: Github Actions, Helm, K8s , Google Cloud Platform Qualifications: A bachelor's degree in a technical field such as computer science, computer engineering, data/software engineering, or a related field is required.
2-4 years of experience required.
A solid foundation in computer science, with strong competencies in data structures, algorithms, and software design, large systems software design and development experience.
Experience performing in-depth troubleshooting and unit testing with both new and legacy production systems, experience in programming, and experience with problem diagnosis and resolution.
Interview: 3 rounds total
- Round 1: Coding assessment.
Additional rounds: Technical Panel Interview Web Conference (Zoom/Teams).
About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
Java, Angular, RDBMS, REST APIs, Kotlin
Remote working/work at home options are available for this role.
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries about this opportunity, please contact our Talent Specialist, Hema, at (63 Title: Full Stack Software Engineer (Java/Kotlin, Angular)
- Remote Duration: 12 Months with potential to extend and to convert to full-time Location: Remote Schedule: Monday Friday, 8 AM 5 PM or 9 AM 6 PM PST Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered.
Description: Participate in daily stand-ups, sprint planning, and retrospectives as part of an agile team.
Design, develop, and maintain UI and APIs for client centralized account and consent management system Ensure APIs are scalable, low-latency, and fault-tolerant to meet business and customer needs.
Build responsive frontend and backend applications using modern frameworks and technologies such as Spring Boot, Java, and Kotlin.
Write and maintain unit tests, integration tests, and end-to-end tests using frameworks like JUnit, Mocha, and Karma.
Design and optimize database schemas and queries to ensure efficient data storage and retrieval.
Collaborate with cross-functional teams to integrate design, development, testing, and quality control.
Ensure code quality and reliability through continuous testing and code reviews.
Use tools like Kubernetes (K8s) and Helm for orchestration and management of containerized applications.
Ensure secure access to APIs and data.
Set up and maintain CI/CD pipelines using tools like GitHub Actions.
Automate build, test, and deployment processes to ensure rapid and reliable delivery of software.
Monitor and optimize the performance of data pipelines and APIs.
Identify and resolve bottlenecks to ensure high availability and responsiveness.
Document API specifications, design decisions, and development processes.
Collaborate with team members, stakeholders, and partners to gather requirements and provide technical support Troubleshoot issues and fix bugs quickly Summary: The main function of a Software Engineer is to design, develop, implement, test, and maintain business and computer applications software or specialized utility programs, including mainframe and client/server applications, and major enhancements of existing systems.
Job Responsibilities: Fine-tune and improve a variety of sophisticated software implementation projects.
Gather and analyze system requirements, document specifications, and develop software solutions to meet client needs and data.
Analyze and review enhancement requests and specifications.
Implement system software and customize it to the client's requirements.
Prepare the detailed software specifications and test plans.
Code new programs to the client's specifications and create test data for testing.
Modify existing programs to new standards and conduct unit testing of developed programs.
Create migration packages for system testing, user testing, and implementation.
Provide quality assurance reviews.
Perform post-implementation validation of software and resolve any bugs found during testing.
Position Overview This is a hands-on Full Stack Developer role, not a leadership or managerial position.
The ideal candidate should be passionate about learning, product development, continuous improvement, and collaborating closely with QA to ensure high quality product releases.
Candidate will work on both front end and back end development within a modern cloud and microservices environment.
Skills Java or Kotlin server-side development experience is the most important skill.
Experience working with REST APIS, Message Bus (Kafka or Pubsub), and SQL/NOSQL Database is the 2nd most important skill.
RESTful Go services Argo CD Bonus Skills: Spring Boot or another Java web framework experience, FHIR, Unit / Integration testing, and performance monitoring experience.
Meet the team: Data Platform team builds low-latency, fault-tolerant data pipelines and APIs to meet various business and customer needs.
Your role will involve building APIs for customer onboarding, account management, hospital /partner integrations, and CGM Data exchange.
This team manages the identity and authentication platform for Dexcom products.
The focus is on building secure, scalable, and user-friendly authentication services.
Candidate will work closely with a tech lead, UI/UX designers, and a squad team.
Where you come in: You will develop cloud-based software systems (APIs and Websites) as part of a multi-disciplinary team that works with an Agile methodology and integrates design, development, testing, and quality control.
What makes you successful: You bring with you rich experience developing full-stack applications Comfortable being part of an agile team that builds components as part of a distributed environment You must be proficient in building responsive frontend and backend applications using modern frameworks and technologies.
- Spring Boot, NodeJS, Express You possess strong Programming skills in one of the following languages: Kotlin, Java, JavaScript/Typescript You are an expert at developing web applications with Angular or another modern JavaScript framework You have previously worked with a NoSQL (Cassandra, MongoDB, DynamoDB) or RDBMS (MySQL, Postgres, Oracle) You understand and practice TDD / BDD using modern software test methodologies and frameworks like Junit, Mocha, Karma You know how to containerize an application using Docker and deploy to the cloud You possess fair knowledge of authentication/authorization concepts such as OAuth, OpenID, and SSO Other preferred bonus skills: GitHub Actions, Helm, K8s, Google Cloud Platform Required Skills (top 3 non-negotiables): 1.
Programming in Java / Kotlin 2 years minimum 2.
REST APIs and Angular 3.
RDBMS Preferred Skills (nice to have) 1.
Containerization and GCP or AWS 2.
Keycloak 3.
Spring Boot, Karate/Playwright Testing Framework Software Skills Required: Mobile app dev (iOS Android ideal, but iOS only is acceptable), backend dev Other preferred bonus skills: Github Actions, Helm, K8s , Google Cloud Platform Qualifications: A bachelor's degree in a technical field such as computer science, computer engineering, data/software engineering, or a related field is required.
2-4 years of experience required.
A solid foundation in computer science, with strong competencies in data structures, algorithms, and software design, large systems software design and development experience.
Experience performing in-depth troubleshooting and unit testing with both new and legacy production systems, experience in programming, and experience with problem diagnosis and resolution.
Interview: 3 rounds total
- Round 1: Coding assessment.
Additional rounds: Technical Panel Interview Web Conference (Zoom/Teams).
About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
Java, Angular, RDBMS, REST APIs, Kotlin
Remote working/work at home options are available for this role.
permanent
J
Registered Nurse (Educator) - Hybrid
🏢 Jobot
Salary not disclosed
Sr Electrical Engineer (Group Manager) - Hybrid
This Jobot Job is hosted by: Tony Barhoum
Are you a fit? Easy Apply now by clicking the "Apply" button
and sending us your resume.
Salary: $120,000 - $160,000 per year
A bit about us:
We are a multi-disciplined engineering firm with multiple offices. We specialize in MEP Engineering, Energy Efficiency & Building Optimization, Civil/Structural, Architecture, and Planning for new construction, renovation, and adaptive reuse. Our projects include commercial buildings, mission critical facilities, educational institutions, healthcare facilities, government buildings, and more. We prioritize work/life balance and maintain a positive company culture. As an employee-owned firm, we believe that putting our employees first helps us provide excellent service to our clients.
Why join us?
BENEFITS
Job Details
Sr Electrical Engineer (Group Manager) - Hybrid
Seeking Sr Electrical Engineer to lead our Team. Successful candidates will have 8-10 years of engineering consulting experience. Responsibilities include design and project management of commercial projects. Proficiency in AutoCAD/Revit is required, along with strong analytical skills and excellent written and verbal communication abilities.
Preferred, Not Required
Interested in hearing more? Easy Apply now by clicking the "Apply" button.
Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: /privacy-policy
Remote working/work at home options are available for this role.
This Jobot Job is hosted by: Tony Barhoum
Are you a fit? Easy Apply now by clicking the "Apply" button
and sending us your resume.
Salary: $120,000 - $160,000 per year
A bit about us:
We are a multi-disciplined engineering firm with multiple offices. We specialize in MEP Engineering, Energy Efficiency & Building Optimization, Civil/Structural, Architecture, and Planning for new construction, renovation, and adaptive reuse. Our projects include commercial buildings, mission critical facilities, educational institutions, healthcare facilities, government buildings, and more. We prioritize work/life balance and maintain a positive company culture. As an employee-owned firm, we believe that putting our employees first helps us provide excellent service to our clients.
Why join us?
BENEFITS
- Competitive Salary & Bonuses!
- Full Benefits Package!
- Employee Ownership & Profit Sharing
- Hybrid Work & Flexible Schedules!
- Meaningful Work!
- Accelerated Career Growth!
Job Details
Sr Electrical Engineer (Group Manager) - Hybrid
Seeking Sr Electrical Engineer to lead our Team. Successful candidates will have 8-10 years of engineering consulting experience. Responsibilities include design and project management of commercial projects. Proficiency in AutoCAD/Revit is required, along with strong analytical skills and excellent written and verbal communication abilities.
- BS/MS in Electrical Engineering or Architectural Engineering
- EIT or PE License Preferred
- 8+ years of experience in designing and managing MEP Projects.
- Proficient in AutoCAD and Revit Software
- Proven experience as an Electrical Engineer designing power and lighting building systems on complex projects.
- Develop electrical designs from concept through completion of construction.
- Prepare engineering design calculations and layouts.
- Prepare detailed engineering reports and narratives.
- Coordinate electrical design requirements with architecture, mechanical, and other disciplines.
- Experience with Educational, Healthcare, Hospitality, Mixed-Use, Multi-Family, and Civic/Institutional/Municipal Projects.
- Ability to mentor junior level staff.
- Excellent communication and interpersonal skills.
- Demonstrated familiarity with Local Building Codes & Standards.
- Strong technical leadership and management skills.
Preferred, Not Required
- LEED Accredited Professional and previous experience participating in the LEED or other green rating system process
- Experience and interest in sustainable building design.
Interested in hearing more? Easy Apply now by clicking the "Apply" button.
Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: /privacy-policy
Remote working/work at home options are available for this role.
permanent
M
Business Operations Analyst - Hybrid
Salary not disclosed
Job Summary Under general supervision, perform intermediate level data research and financial analysis to support business operations and present findings to manager or project leader.
Plan and prepare business, financial and data analysis.
Develop recommendations to solve problems and issues related to business operations.
Job Description Responsibilities: Plan and prepare supply chain and operational analysis.
Develop detailed project plans with complete tasks & measurements and identify resources needed and task assignments made.
Follow up, report on and coordinate projects.
Provide analysis and reporting in conjunction with Information Systems, the Operations and Financial Audit.
Recommend, develop, create and implement standard reporting for routine business reports.
Communicate results of key measurement projects.
Recommend actions and provide guidance on supply chain and operational problems.
Provide ongoing data analysis, plan development and appropriate communication as required; e.g., branch moves and openings related to “demand realignment”, definition and reporting of error and/or out of bounds conditions, or creation of ad hoc reports as business conditions necessitate.
Prepare detailed design documents that bridge user requirements and computer and database developers Support labor forecasting, staffing plans, and variance analysis Evaluate existing staffing models and processes to reduce bottlenecks, reduce costs, and enhance overall operational throughput.
Required Experience: Education Bachelor’s degree in Industrial Engineering, Finance, Accounting, Information Services, Business Administration, Operations Management, Mathematics or Applied Statistics OR 2-5 years relevant work experience in an analytical role supporting warehouse, distribution, or supply chain operations Work Experience At least 2 year operations and/or inventory management experience or equivalent combination of education and experience.
Experience communicating to groups of managers, clients, customers, vendors, senior managers and the general public Proven ability to extract and analyze large datasets from multiple systems (SQL, Excel, WMS, SAP, Tableau, ETC.) Experience translating data into clear, actionable reports and presentations Proven experience developing and owning labor forecasts and staffing models using historical data, seasonality, and operational demand drivers Additional: Intermediate level skill in Microsoft Access (for example: designing and creating simple queries, modifying data types, adding dates, working with required fields and/or creating labels).
Intermediate level skill in Microsoft Excel (for example: using SUM function, setting borders, setting column width, inserting charts, using text wrap, sorting, setting headers and footers and/or print scaling).
Experience calculating figures and amounts such as discounts, interest, commissions, proportions, percentages and volume.
Experience applying standard financial, accounting and business problem-solving skills to business problems.
Preferred Requirements: Relevant Work Experience: Experience in project management and data analysis.
Experience with BEX (SAP Business Explorer), Web Focus, FoxPro, SAP, Manhattan, Kronos, and or Visual Basic.
Understanding of warehouse labor drivers, productivity metrics, and operational workflows Experience with SQL databases querying Certification / Licensure: CPIM, CPA or professional engineering license.
Medline Industries, LP, and its subsidiaries, offer a competitive total rewards package, continuing education & training, and tremendous potential with a growing worldwide organization.
The anticipated salary range for this position: $67,000.00
- $101,000.00 Annual The actual salary will vary based on applicant’s location, education, experience, skills, and abilities.
This role is bonus and/or incentive eligible.
Medline will not pay less than the applicable minimum wage or salary threshold.
Our benefit package includes health insurance, life and disability, 401(k) contributions, paid time off, etc., for employees working 30 or more hours per week on average.
For a more comprehensive list of our benefits please click here .
For roles where employees work less than 30 hours per week, benefits include 401(k) contributions as well as access to the Employee Assistance Program, Employee Resource Groups and the Employee Service Corp.
We’re dedicated to creating a Medline where everyone feels they belong and can grow their career.
We strive to do this by seeking diversity in all forms, acting inclusively, and ensuring that people have tools and resources to perform at their best.
Explore our Belonging page here .
Medline Industries, LP is an equal opportunity employer.
Medline evaluates qualified individuals without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, age, disability, neurodivergence, protected veteran status, marital or family status, caregiver responsibilities, genetic information, or any other characteristic protected by applicable federal, state, or local laws.
Remote working/work at home options are available for this role.
Plan and prepare business, financial and data analysis.
Develop recommendations to solve problems and issues related to business operations.
Job Description Responsibilities: Plan and prepare supply chain and operational analysis.
Develop detailed project plans with complete tasks & measurements and identify resources needed and task assignments made.
Follow up, report on and coordinate projects.
Provide analysis and reporting in conjunction with Information Systems, the Operations and Financial Audit.
Recommend, develop, create and implement standard reporting for routine business reports.
Communicate results of key measurement projects.
Recommend actions and provide guidance on supply chain and operational problems.
Provide ongoing data analysis, plan development and appropriate communication as required; e.g., branch moves and openings related to “demand realignment”, definition and reporting of error and/or out of bounds conditions, or creation of ad hoc reports as business conditions necessitate.
Prepare detailed design documents that bridge user requirements and computer and database developers Support labor forecasting, staffing plans, and variance analysis Evaluate existing staffing models and processes to reduce bottlenecks, reduce costs, and enhance overall operational throughput.
Required Experience: Education Bachelor’s degree in Industrial Engineering, Finance, Accounting, Information Services, Business Administration, Operations Management, Mathematics or Applied Statistics OR 2-5 years relevant work experience in an analytical role supporting warehouse, distribution, or supply chain operations Work Experience At least 2 year operations and/or inventory management experience or equivalent combination of education and experience.
Experience communicating to groups of managers, clients, customers, vendors, senior managers and the general public Proven ability to extract and analyze large datasets from multiple systems (SQL, Excel, WMS, SAP, Tableau, ETC.) Experience translating data into clear, actionable reports and presentations Proven experience developing and owning labor forecasts and staffing models using historical data, seasonality, and operational demand drivers Additional: Intermediate level skill in Microsoft Access (for example: designing and creating simple queries, modifying data types, adding dates, working with required fields and/or creating labels).
Intermediate level skill in Microsoft Excel (for example: using SUM function, setting borders, setting column width, inserting charts, using text wrap, sorting, setting headers and footers and/or print scaling).
Experience calculating figures and amounts such as discounts, interest, commissions, proportions, percentages and volume.
Experience applying standard financial, accounting and business problem-solving skills to business problems.
Preferred Requirements: Relevant Work Experience: Experience in project management and data analysis.
Experience with BEX (SAP Business Explorer), Web Focus, FoxPro, SAP, Manhattan, Kronos, and or Visual Basic.
Understanding of warehouse labor drivers, productivity metrics, and operational workflows Experience with SQL databases querying Certification / Licensure: CPIM, CPA or professional engineering license.
Medline Industries, LP, and its subsidiaries, offer a competitive total rewards package, continuing education & training, and tremendous potential with a growing worldwide organization.
The anticipated salary range for this position: $67,000.00
- $101,000.00 Annual The actual salary will vary based on applicant’s location, education, experience, skills, and abilities.
This role is bonus and/or incentive eligible.
Medline will not pay less than the applicable minimum wage or salary threshold.
Our benefit package includes health insurance, life and disability, 401(k) contributions, paid time off, etc., for employees working 30 or more hours per week on average.
For a more comprehensive list of our benefits please click here .
For roles where employees work less than 30 hours per week, benefits include 401(k) contributions as well as access to the Employee Assistance Program, Employee Resource Groups and the Employee Service Corp.
We’re dedicated to creating a Medline where everyone feels they belong and can grow their career.
We strive to do this by seeking diversity in all forms, acting inclusively, and ensuring that people have tools and resources to perform at their best.
Explore our Belonging page here .
Medline Industries, LP is an equal opportunity employer.
Medline evaluates qualified individuals without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, age, disability, neurodivergence, protected veteran status, marital or family status, caregiver responsibilities, genetic information, or any other characteristic protected by applicable federal, state, or local laws.
Remote working/work at home options are available for this role.
Not Specified
jobs by
✓ All jobs loaded